Electronic Biosensing Research Articles

Electrochemical processes and mechanistic aspects of field-effect sensors for biomolecules.

Electronic biosensing is a leading technology for determining concentrations of biomolecules. In some cases, the presence of an analyte molecule induces a measured change in current flow, while in other cases, a new potential difference is established. In the particular case of a field effect biosensor, the potential difference is monitored as a change in conductance elsewhere in the device, such as across a film of an underlying semiconductor. Often, the mechanisms that lead to these responses are not specifically determined. Because improved understanding of these mechanisms will lead to improved performance, it is important to highlight those studies where various mechanistic possibilities are investigated. This review explores a range of possible mechanistic contributions to field-effect biosensor signals. First, we define the field-effect biosensor and the chemical interactions that lead to the field effect, followed by a section on theoretical and mechanistic background. We then discuss materials used in field-effect biosensors and approaches to improving signals from field-effect biosensors. We specifically cover the biomolecule interactions that produce local electric fields, structures and processes at interfaces between bioanalyte solutions and electronic materials, semiconductors used in biochemical sensors, dielectric layers used in top-gated sensors, and mechanisms for converting the surface voltage change to higher signal/noise outputs in circuits.

Single walled carbon nanotube-based junction biosensor for detection of Escherichia coli.

Foodborne pathogen detection using biomolecules and nanomaterials may lead to platforms for rapid and simple electronic biosensing. Integration of single walled carbon nanotubes (SWCNTs) and immobilized antibodies into a disposable bio-nano combinatorial junction sensor was fabricated for detection of Escherichia coli K-12. Gold tungsten wires (50 µm diameter) coated with polyethylenimine (PEI) and SWCNTs were aligned to form a crossbar junction, which was functionalized with streptavidin and biotinylated antibodies to allow for enhanced specificity towards targeted microbes. In this study, changes in electrical current (ΔI) after bioaffinity reactions between bacterial cells (E. coli K-12) and antibodies on the SWCNT surface were monitored to evaluate the sensor's performance. The averaged ΔI increased from 33.13 nA to 290.9 nA with the presence of SWCNTs in a 108 CFU/mL concentration of E. coli, thus showing an improvement in sensing magnitude. Electrical current measurements demonstrated a linear relationship (R2 = 0.973) between the changes in current and concentrations of bacterial suspension in range of 102–105 CFU/mL. Current decreased as cell concentrations increased, due to increased bacterial resistance on the bio-nano modified surface. The detection limit of the developed sensor was 102 CFU/mL with a detection time of less than 5 min with nanotubes. Therefore, the fabricated disposable junction biosensor with a functionalized SWCNT platform shows potential for high-performance biosensing and application as a detection device for foodborne pathogens.

Real-time monitoring of extracellular matrix-mediated PC12 cell attachment and proliferation using an electronic biosensing device

The attachment and proliferation of a well-established, neuron-like cell line, rat pheochromocytoma (PC12) cells, on different extracellular matrices (ECMs) was monitored using cellular impedance sensing (CIS). Commonly used ECMs, including fibronectin, laminin, poly-L: -lysine, collagen and poly-L: -lysine followed by laminin, in addition to DMEM cell culture media alone as a control, were studied: CIS identified the dynamic progress of the adhesion and proliferation of the cells on different ECMs. Among these modified ECM surfaces, the laminin- and poly-L: -lysine/laminin-modified surfaces were the best suited for the neuron-to-electrode surface attachment and proliferation, which was confirmed by MTT assays and a scanning electron microscopy analysis. This work provides a simple method to study neuron cell/ECM interactions in a real-time, label-free, and quantitative manner.

Functional Monolayers for Improved Resistance to Protein Adsorption: Oligo(ethylene glycol)-Modified Silicon and Diamond Surfaces

The interaction of proteins with semiconductors such as silicon and diamond is of great interest for applications such as electronic biosensing. We have investigated the use of covalently bound oligo(ethylene glycol), EG, monolayers on diamond and silicon to minimize nonspecific protein adsorption. Protein adsorption was monitored by fluorescence scanning as a function of the length of the ethylene glycol chain (EG3 through EG6) and the terminal functional group (methyl- versus hydroxyl-terminated EG3 monolayer). More quantitative measurements were made by eluting adsorbed avidin from the surface and measuring the intensity of fluorescence in the solution. The attachment chemistry of the tri(ethylene glycol) molecules and monolayer orientation was studied by X-ray photoelectron spectroscopy. Improvement in the selectivity of surfaces modified with EG functionality was demonstrated in two model biosensing assays. We find that high-quality EG monolayers are formed on silicon and diamond and that these EG3 monolayers are as effective as EG3 self-assembled monolayers on gold at resisting nonspecific avidin adsorption. These results show promise for use of silicon and diamond materials in many potential applications such as biosensing and medical implants.

Cover Picture: Biomolecule‐Functionalized Carbon Nanotubes: Applications in Nanobioelectronics (ChemPhysChem 8/2004)

The cover picture shows that biomolecule–carbon nanotube hybrids provide exciting new materials for bionanotechnology. In the Review on pp. 1084, E. Katz and I. Willner highlight recent advances in the field. The use of these systems for electronic biosensing, assembly of nanocircuitry, and the organization of nanoscale devices is discussed.

An investigation of the mechanisms of electronic sensing of protein adsorption on carbon nanotube devices.

It has been reported that protein adsorption on single-walled carbon nanotube field effect transistors (FETs) leads to appreciable changes in the electrical conductance of the devices, a phenomenon that can be exploited for label-free detection of biomolecules with a high potential for miniaturization. This work presents an elucidation of the electronic biosensing mechanisms with a newly developed microarray of nanotube "micromat" sensors. Chemical functionalization schemes are devised to block selected components of the devices from protein adsorption, self-assembled monolayers (SAMs) of methoxy(poly(ethylene glycol))thiol (mPEG-SH) on the metal electrodes (Au, Pd) and PEG-containing surfactants on the nanotubes. Extensive characterization reveals that electronic effects occurring at the metal-nanotube contacts due to protein adsorption constitute a more significant contribution to the electronic biosensing signal than adsorption solely along the exposed lengths of the nanotubes.