Electron Transfer-reversible Addition-fragmentation Chain Transfer Research Articles

3D Temperature-Controlled Interchangeable Pattern for Size-Selective Nanoparticle Capture.

Patterned surfaces with distinct regularity and structured arrangements have attracted great interest due to their extensive promising applications. Although colloidal patterning has conventionally been used to create such surfaces, herein, we introduce a novel 3D patterned poly(N-isopropylacrylamide) (PNIPAM) surface, synthesized by using a combination of colloidal templating and surface-initiated photoinduced electron transfer-reversible addition-fragmentation chain transfer (SI-PET-RAFT) polymerization. In order to investigate the temperature-driven 3D morphological variations at a lower critical solution temperature (LCST) of ∼32 °C, multifaceted characterization techniques were employed. Atomic force microscopy confirmed the morphological transformations at 20 and 40 °C, while water contact angle measurements, upon heating, revealed distinct trends, offering insights into the correlation between surface wettability and topography adaptations. Moreover, quartz crystal microbalance with dissipation monitoring and electrochemical measurements were employed to detect the topographical adjustments of the unique hollow capsule structure within the LCST. Tests using different sizes of PSNPs shed light on the size-selective capture-release potential of the patterned PNIPAM, accentuating its biomimetic open-close behavior. Notably, our approach negates the necessity for expensive proteins, harnessing temperature adjustments to facilitate the noninvasive and efficient reversible capture and release of nanostructures. This advancement hopes to pave the way for future innovative cellular analysis platforms.

Emulsion-Directed Synthesis of Poly-Porphyrin Nanoparticles as Heterogeneous Photocatalysts for PET-RAFT Polymerization.

Heterogeneous photocatalysts have attracted extensive attention in photo-induced electron transfer-reversible addition-fragmentation chain transfer (PET-RAFT) polymerization due to their remarkable advantages such as easy preparation, tunable photoelectric properties, and recyclability. In this study, zinc (II) 5,10,15,20-tetrakis(4-aminophenyl)porphyrin (ZnTAPP)-based poly-porphyrin nanoparticles (PTAPP-Zn) are constructed by an emulsion-directed approach. It is investigated as a heterogeneous photocatalyst for PET-RAFT polymerization of various methacrylate monomers under visible light exposure, and the reactions show refined polymerization control with high monomer conversions. Furthermore, it is demonstrated that the PTAPP-Zn nanoparticles with the larger pore size enhance photocatalytic activity in PET-RAFT polymerization. In addition, the capabilities of oxygen tolerance and temporal control are demonstrated and PTAPP-Zn particles can be easily recycled and reused without an obvious decrease in catalytic efficiency.

Synthesis of hyperbranched polymer films via electrodeposition and oxygen-tolerant surface-initiated photoinduced polymerization

HypothesisHyperbranched polymers, not only possess higher functionality, but are also easier to prepare compared to dendrimers and dendric polymers. Combining electrodeposition and surface-initiated photoinduced electron transfer-reversible addition-fragmentation chain transfer (SI-PET-RAFT) polymerization is hypothesized to be a novel strategy for preparing hyperbranched polymer films on conductive surfaces without degassing. ExperimentsPolymer brush grafted films with four different architectures (i.e. linear, branched, linear-block-branched, and branched-block-linear) were prepared on gold-coated glass substrates using electrodeposition, followed by SI-PET-RAFT polymerization. The resulting film structure and thickness, surface topology, absorption property, and electrochemical behavior were confirmed by spectroscopy, microscopy, microbalance technique, and impedance measurement. FindingsThese hyperbranched polymer brushes were capable of forming a thicker but more uniformly covered films compared to linear polymer brush films, demonstrating that hyperbranched polymer films can be potentially useful for fabricating protective polymer coatings on various conductive surfaces.

SI-PET-RAFT in flow: improved control over polymer brush growth.

Surface-initiated photoinduced electron transfer-reversible addition-fragmentation chain transfer (SI-PET-RAFT) provides a light-dependent tool to synthesize polymer brushes on different surfaces that tolerates oxygen and water, and does not require a metal catalyst. Here we introduce improved control over SI-PET-RAFT polymerizations via continuous flow conditions. We confirm the composition and topological structure of the brushes by X-ray photoelectron spectroscopy, ellipsometry, and AFM. The improved control compared to no-flow conditions provides prolonged linear growth of the polymer brush (up to 250 nm, where no-flow polymerization maxed out <50 nm), and improved polymerization control of the polymer brush that allows the construction of diblock polymer brushes. We further show the linear correlation between the molecular weight of the polymer brush and its dry thickness by combining ellipsometry and single-molecule force spectroscopy.

Antiviral Polymer Brushes by Visible-Light-Induced, Oxygen-Tolerant Covalent Surface Coating

This work presents a novel route for creating metal-free antiviral coatings based on polymer brushes synthesized by surface-initiated photoinduced electron transfer-reversible addition-fragmentation chain transfer (SI-PET-RAFT) polymerization, applying eosin Y as a photocatalyst, water as a solvent, and visible light as a driving force. The polymer brushes were synthesized using N-[3-(decyldimethyl)-aminopropyl] methacrylamide bromide and carboxybetaine methacrylamide monomers. The chemical composition, thickness, roughness, and wettability of the resulting polymer brush coatings were characterized by X-ray photoelectron spectroscopy (XPS), atomic force microscopy (AFM), water contact angle measurements, and ellipsometry. The antiviral properties of coatings were investigated by exposure to severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) and avian influenza viruses, with further measurement of residual viable viral particles. The best performance was obtained with Cu surfaces, with a ca. 20-fold reduction of SARS-Cov-2 and a 50-fold reduction in avian influenza. On the polymer brush-modified surfaces, the number of viable virus particles decreased by about 5-6 times faster for avian flu and about 2-3 times faster for SARS-CoV-2, all compared to unmodified silicon surfaces. Interestingly, no significant differences were obtained between quaternary ammonium brushes and zwitterionic brushes.

Photoinduced Ion-Pair Inner-Sphere Electron Transfer-Reversible Addition-Fragmentation Chain Transfer Polymerization.

Photoredox-mediated reversible deactivation radical polymerization (RDRP) is a promising method of precise synthesis of polymers with diverse structures and properties. However, its mechanism mainly based on the outer-sphere electron transfer (OSET) leads to stringent requirements for an efficient photocatalyst. In this paper, the zwitterionic organoboranes [L2B]+X- are prepared and applied in reversible addition-fragmentation chain transfer (RAFT) polymerization with the photoinduced ion-pair inner-sphere electron transfer (IP-ISET) mechanism. The ion-pair electron transfer mechanism and the formation of the radical [L2B]• are supported by electron paramagnetic resonance (EPR) radical capture experiments, 1H/11B NMR spectroscopy, spectroelectrochemical spectroscopy, transient absorption spectroscopy, theoretical calculation, and photoluminescence quenching experiments. Photoluminescence quenching experiments show that when [CTA]/[[L2B]+] ≥ 0.6, it is static quenching because of the in situ formation of [L2B]+[ZCS2]-, the real catalytic species. [L2B]+[C3H7SCS2]- is synthesized, and its photoluminescence lifetime is the same as the lifetime in the static quenching experiment, indicating the formation of [L2B]+[ZCS2]- in polymerization and the IP-ISET mechanism. The matrix-assisted laser desorption ionization time-of-flight mass (MALDI-TOF MS) spectra show that the structure of [C3H7SCS2] was incorporated into the polymer, indicating that ion-pair electron transfer occurs in catalytic species. The polymerization shows high catalytic activity at ppb catalyst loading, a wide range of monomers, excellent tolerance in the presence of 5 mol % phenolic inhibitors, and the synthesis of ultrahigh-molecular-weight polymers. This protocol with the IP-ISET mechanism exhibits a value in the development of new organic transformations and polymerization methods.

Synthesis of zwitterionic copolymer containing sulfobetaine and catechol for antibacterial application

• A catechol zwitterionic copolymer was handily prepared by PET-RAFT polymerization. • Polymer grafted surfaces were readily fabricated via solution deposition method. • Incorporation of catechol rendered copolymer excellent antibacterial potency. Catechol-modified zwitterionic polymers have been successfully applied for functional modification of surfaces. However, catechol derivatives synthesized by atom transfer radical polymerization (ATRP) involve complicated procedures and harsh conditions. In this study, a random copolymer P(SBMA- co -DA) (PSD) was prepared from sulfobetaine methacrylate (SBMA) and N-3,4-dihydroxybenzenethyl methacrylamide (DA) by photo-induced electron transfer-reversible addition-fragmentation chain transfer (PET-RAFT) polymerization technique. Staphylococcus aureus adhesion assay showed that PSD possessed similarly powerful antibacterial performance at high concentration as compared to dopamine-modified poloxamer 407, while PSBMA (PSB) exhibited no obvious antibacterial potency. We believe that the facile method will be beneficial to synthesis of catechol-containing polymers for different applications.

Homopolymer-block-Alternating Copolymers Composed of Acrylamide Units: Design of Transformable Divinyl Monomers and Sequence-Specific Thermoresponsive Properties.

In this work, we synthesized an acrylamide-based terpolymer that is a block copolymer composed of an AB alternating copolymer and a C homopolymer. The key to the unprecedented achievement is rational design of an acrylate-acrylamide divinyl monomer carrying CF3-substituted salicylic acid ester bonds (AAm-CF3) to realize the efficient and selective cyclopolymerization as well as the quantitative transformation of the resultant cyclorepeating units. The selectivity in the cyclopolymerization and the pendant transformation ability were evaluated through reactivity ratios of the corresponding model monomers and quantitative aminolysis reactions of the model compound. The cyclopolymerization via the photoinduced electron transfer-reversible addition-fragmentation chain transfer (PET-RAFT) process with a macrochain-transfer agent and subsequent aminolysis reaction afforded the homopolymer-block-alternating copolymer. The sequence-controlled terpolymer exhibited a very unique thermal response behavior in water that was strikingly different from the corresponding sequence-uncontrolled terpolymers, such as homopolymer-block-statistical copolymers and all statistical terpolymers, despite the fact that the structure cannot be distinguished by 1H NMR.

Anti-UV and hydrophobic dual-functional coating fabrication for flame retardant polyester fabrics by surface-initiated PET RAFT technique

Inspired by the flourish of living radical polymerization (LRP), surface-initiated LPR technology shows great potential in good control and accurate tailoring of target polymer coatings. In this work, surface-initiated photoinduced electron transfer-reversible addition-fragmentation chain transfer polymerization (SI-PET-RAFT) was employed as a facile synthetic rout for the fabrication of surface-tethered polymeric brushes with anti-UV and hydrophobic properties for flame retardant polyester fabrics (FRPET). Firstly, RAFT agent 4-Cyano-4-[(dodecyl sulfanyl thiocarbonyl) sulfanyl] pentanoic acid (CDTPA) was grafted onto polydopamine (PDA) deposited FRPET, followed by the controlled growth of glycidyl methacrylate (GMA) onto polyester fabrics via SI-PET-RAFT method. Finally, benzotriazole anti-UV agents were grafted as secondary functionalization. According to SEM-EDS and XPS analysis, PGMA has been immobilized successfully onto the surface of FRPET fabrics. An efficient PET RAFT polymerization of GMA with low dispersity (Ð<1.2), temporal control, and chain-end fidelity was achieved under mild yellow light irradiation (λmax = 570 nm, 4 W/m2). It also exhibited the feasibility of polymerization under natural sunlight and oxygen tolerance. The flame retardant, UV resistant and hydrophobic properties of the treated fabrics were investigated. In the microscale combustion calorimetry test, the peak heat release rate (PHRR) effectively decreased by 59.50%. In the cone calorimetry test, the PHRR and total heat release also reduced. The melt-dripping was eliminated in the vertical flaming test and reached V-0 rating with LOI value of 28%. The UV transmittance of the fabric decreased to<4%, meeting the standard of UV resistant fabric and the water contact angle reached 125°, thus making flame retardant polyester fabric have good hydrophobicity. Besides, it also kept good durability in flame retardancy, UV shielding and water repellent. This study provides new insights into the surface engineering of photoregulated LRP techniques for multi-functional coating synthesis.

Selective Photoactivation of Trithiocarbonates Mediated by Metal Naphthalocyanines and Overcoming Activation Barriers Using Thermal Energy.

Metal naphthalocyanines (MNcs) were demonstrated to be efficient photocatalysts to activate photoinduced electron-transfer reversible addition-fragmentation chain transfer (PET-RAFT) polymerization, enabling well-controlled polymerization of (meth)acrylates under near-infrared (λ = 780 nm) light. Owing to their lower redox potential compared to previously explored photocatalysts, the activation of trithiocarbonate RAFT agents exhibited a unique selectivity that was dependent on the nature of the R group. Specifically, MNcs were capable in activating tertiary R group trithiocarbonates, whereas no activation of the trithiocarbonate possessing a secondary R group was observed. The combination of density functional theory calculations and experimental studies have revealed new mechanistic insights into the factors governing a PET-RAFT mechanism and explained this unique selectivity of MNcs toward tertiary carbon trithiocarbonates. Interestingly, by increasing the reaction temperature moderately (i.e., ∼15 °C), the energy barrier prohibiting the photoactivation of the trithiocarbonate with a secondary R group was overcome, enabling their successful activation.

Synthesis of Polymer Brushes Via SI-PET-RAFT for Photodynamic Inactivation of Bacteria.

Biofilms are a persistent issue in healthcare and industry. Once formed, the eradication of biofilms is challenging as the extracellular polymeric matrix provides protection against harsh environmental conditions and physically enhances resistance to antimicrobials. The fabrication of polymer brush coatings provides a versatile approach to modify the surface to resist the formation of biofilms. Herein, the authors report a facile synthetic route for the preparation of surface-tethered polymeric brushes with antifouling and visible light activated bactericidal properties using surface-initiated photoinduced electron transfer-reversible addition-fragmentation chain transfer polymerization (SI-PET-RAFT). Bactericidal property via the generation of singlet oxygen, which can be temporally and spatially controlled, is investigated against both Gram-positive and Gram-negative bacteria. In addition, the antibacterial properties of the surface can be recycled. This work paves the way for the preparation of polymer films that can resist and kill bacterial biofilms.

Porphyrinic Zirconium Metal-Organic Frameworks (MOFs) as Heterogeneous Photocatalysts for PET-RAFT Polymerization and Stereolithography.

In this study, porphyrinic zirconium (Zr) MOFs were investigated as heterogeneous photocatalysts for photoinduced electron transfer-reversible addition-fragmentation chain transfer (PET-RAFT) polymerization of various monomers under a broad range of wavelengths, producing polymers with high monomer conversions, narrow molecular weight distributions, low dispersity and good chain-end fidelity. Screening of various porphyrinic Zr-MOFs (Zn) containing Zn-metalled porphyrinic ligands demonstrated that MOF-525 (Zn) with the smallest size had the best photocatalytic activity in PET-RAFT polymerization, due to enhanced dispersion and light penetration. Oxygen tolerance and temporal control were also demonstrated during MOF catalysed PET-RAFT. Results suggested that the polymerization rates were significantly affected by changing the size and surface area of MOFs, and the heterogeneous MOF photocatalysts could be easily separated and recycled for up to five independent PET-RAFT polymerizations without an obvious decrease in efficiency. Finally, the MOF photocatalysts were utilized to create three-dimensional polymeric objects with high resolution via visible light mediated stereolithography in an open-air environment.

Porphyrin-based donor-acceptor COFs as efficient and reusable photocatalysts for PET-RAFT polymerization under broad spectrum excitation.

Covalent organic frameworks (COFs) are crystalline and porous organic materials attractive for photocatalysis applications due to their structural versatility and tunable optical and electronic properties. The use of photocatalysts (PCs) for polymerizations enables the preparation of well-defined polymeric materials under mild reaction conditions. Herein, we report two porphyrin-based donor–acceptor COFs that are effective heterogeneous PCs for photoinduced electron transfer-reversible addition–fragmentation chain transfer (PET-RAFT). Using density functional theory (DFT) calculations, we designed porphyrin COFs with strong donor–acceptor characteristics and delocalized conduction bands. The COFs were effective PCs for PET-RAFT, successfully polymerizing a variety of monomers in both organic and aqueous media using visible light (λmax from 460 to 635 nm) to produce polymers with tunable molecular weights (MWs), low molecular weight dispersity, and good chain-end fidelity. The heterogeneous COF PCs could also be reused for PET-RAFT polymerization at least 5 times without losing photocatalytic performance. This work demonstrates porphyrin-based COFs that are effective catalysts for photo-RDRP and establishes design principles for the development of highly active COF PCs for a variety of applications.

Benchtop Preparation of Polymer Brushes by SI-PET-RAFT: The Effect of the Polymer Composition and Structure on Inhibition of a Pseudomonas Biofilm

We report a high-throughput method for producing surface-tethered polymeric brushes on glass substrates via surface-initiated photoinduced electron transfer-reversible addition-fragmentation chain transfer polymerization (SI-PET-RAFT). Due to its excellent oxygen tolerance, SI-PET-RAFT allows brush growth using low reagent volumes (30 μL) without prior degassing. An initial 28 homopolymer brush library was successfully prepared and screened with respect to their antifouling performance. The high-throughput approach was further exploited to expand the library to encompass statistical, gradient, and block architectures to investigate the effect of monomer composition and distribution using two monomers of disparate performance. In this manner, the degree of attachment from Gram-negative Pseudomonas aeruginosa (PA) bacterial biofilms could be tuned between the bounds set by the homopolymer brushes.

Effect of Hydrophobic Groups on Antimicrobial and Hemolytic Activity: Developing a Predictive Tool for Ternary Antimicrobial Polymers.

Antimicrobial polymers have emerged as a potential solution to the growing problem of antimicrobial resistance. Although several studies have examined the effects of various parameters on the antimicrobial and hemolytic activity of statistical copolymers, there are still numerous parameters to be explored. Therefore, in this study, we developed a library of 36 statistical amphiphilic ternary copolymers prepared via photoinduced electron transfer-reversible addition-fragmentation chain transfer polymerization to systematically evaluate the influence of hydrophobic groups [number of carbons (5, 7, and 9)] and chain type of the hydrophobic monomer (cyclic, aromatic, linear, or branched), monomer ratio, and degree of polymerization (DPn) on antimicrobial and hemolytic activity. To guide our synthetic strategy, we developed a pre-experimental screening approach using C log P values of oligomer models, which correspond to the logarithm of the partition coefficient of compounds between n-octanol and water. This method enabled correlation of polymer hydrophobicity with antimicrobial and hemolytic activity. In addition, this study revealed that minimizing hydrophobicity and hydrophobic content were key factors in controlling hemolysis, whereas optimizing antimicrobial activity was more complex. High antimicrobial activity required hydrophobicity (i.e., C log P, hydrophobicity index) that was neither too high nor too low, an appropriate cationic/hydrophobic balance, and structural compatibility between the chosen monomers. Furthermore, these findings could guide the design of future antimicrobial ternary copolymers and suggest that C log P values between 0 and 2 have the best balance of high antimicrobial activity and low hemolytic activity.

PET-RAFT copolymerization of vinyl acetate and acrylic acid

Photoinduced electron transfer-reversible addition–fragmentation chain transfer (PET-RAFT) polymerization of vinyl acetate (VAc) and acrylic acid (AA) was successfully realized in methanol at room temperature under blue LED (420 nm, 6 mW/cm2) irradiation with xanthate as RAFT agent and fac-[Ir(ppy)3] as the photocatalyst. The well-defined copolymers of poly(VAc-co-AA) with controlled molecular weights (Mn,GPC) and polydispersity index (PDI) were successfully obtained. The polymerization revealed the behaviors of controlled/living polymerization, which was verified by the observed linear relationship of ln([M]0/[M]t) with respect to irradiation time and that of the experimental molecular weights (Mn,GPC) with respect to monomer conversion. GPC curves showed a single peak and shifted to high molecular weights with increasing the irradiation time. The reactivity ratios of VAc and AA were 0.043 and 1.181, respectively in this system. The effect of the amount of fac-[Ir(ppy)3] on PET-RAFT polymerization was investigated. The monomer conversion increased with increasing the amount of fac-[Ir(ppy)3] and the PDI decreased with the increase in the amount of fac-[Ir(ppy)3]. The temporal controllable PET-RAFT polymerization of vinyl acetate (VAc) and acrylic acid (AA) was achieved. The structure of synthesized poly(VAc-co-AA) was characterized by nuclear magnetic resonance spectroscopy (1H NMR) and gel permeation chromatography (GPC), respectively. The extended experiments of poly(VAc-co-AA) with fresh AA was conducted under the irradiation of blue LED, and the results demonstrated that this extension polymerization displayed controlled polymerization behavior. The mechanism was explained in this study.

Light and magnetism dual-gated photoinduced electron transfer-reversible addition–fragmentation chain transfer (PET-RAFT) polymerization

A novel raspberry-like γ-Fe2O3@carbon dot (CD) nanocatalyst was prepared and applied for photoinduced electron transfer-reversible addition–fragmentation chain transfer (PET-RAFT) polymerization. The nanocatalyst was found to be an efficient photocatalyst in visible light-regulated PET-RAFT polymerization owing to the oxidative quenching mechanism between the photoexcited γ-Fe2O3@CDs and the RAFT agent in the PET process. Notably, polymerization can be reversibly ceased in the absence of light or under an external magnetic field. The superparamagnetic nature and high saturation magnetization value (∼30.4 emu g−1) of the nanocatalyst contribute to convenient recycling of the nanocatalyst after polymerization. The PET-RAFT polymerization with the nanocatalyst before and after recycling was investigated, which displayed all the characteristics of controlled/living polymerization systems.

Structural Engineering of Graphitic Carbon Nitrides for Enhanced Metal-Free PET-RAFT Polymerizations in Heterogeneous and Homogeneous Systems.

Developing visible-light-regulated controlled/living radical polymerization techniques for the synthesis of polymers with a predictable molecular weight, spatial and temporal control, and well-defined end-group functionality is being pursued by the macromolecular community worldwide. In this study, a new metal-free photoinduced electron transfer-reversible addition-fragmentation chain transfer (PET-RAFT) polymerization system was developed for controlled macromolecular synthesis in both heterogeneous and homogeneous systems by structural engineering of graphitic carbon nitrides (g-C3N4) to improve the textural, optical, and electronic properties. A heteroatom-mediated synthesis enabled the preparation of g-C3N4 with improved structural properties and increased absorption in the visible light region. Enhanced PET-RAFT polymerization of vinyl monomers with low dispersity (Đ < 1.2), temporal control, and high chain-end fidelity was achieved under mild blue light irradiation (λmax = 465 nm, 3 mW/cm2). Moreover, we demonstrate, for the first time, that the g-C3N4-catalyzed RAFT polymerization could be realized in a homogeneous system after structural evolution of bulk g-C3N4 into soluble nanosheets with enhanced photocatalytic efficiency up to high monomer conversion. This study provides new insights into the structure–performance relationship of g-C3N4 for photoregulated PET-RAFT polymerization under visible light. Moreover, the development of a homogeneous g-C3N4-catalyzed photosynthesis system should broaden the application scope of these fascinating photocatalysts while benefiting synthetic upscaling by continuous flow and/or microfluidic reactors.

Effect of Tertiary Amines on the Photoinduced Electron Transfer-Reversible Addition–Fragmentation Chain Transfer (PET-RAFT) Polymerization

Herein, we report a detailed investigation on the influence of a series of tertiary alkylamine on the rate of the photoinduced electron transfer–reversible addition–fragmentation chain transfer (PE...

Surface‐initiated PET‐RAFT polymerization under metal‐free and ambient conditions using enzyme degassing

ABSTRACTAn open‐to‐air method for the efficient synthesis of surface‐tethered polymer brushes based on photoinduced electron transfer‐reversible addition‐fragmentation chain transfer (PET‐RAFT) polymerization is reported. Key to this approach is an enzyme‐assisted strategy using glucose oxidase to facilitate the in situ removal of oxygen during the polymerization process. Control experiments in the absence of glucose oxidase confirm the importance of enzymatic deoxygenation for successful polymerization of a variety of acrylamide, methacrylate, and acrylate monomers. In accordance with controlled polymerization kinetics, a linear increase in brush height as a function of irradiation time for a range of light intensities is demonstrated. Importantly, the use of light to mediate growth and the inherent monomer versatility of PET‐RAFT allow for the facile fabrication of well‐defined polymer brushes under aqueous conditions. © 2019 Wiley Periodicals, Inc. J. Polym. Sci. 2020, 58, 70–76