Electron Transfer Reagents Research Articles

A Carborane-Derived Proton-Coupled Electron Transfer Reagent.

Reagents capable of concerted proton-electron transfer (CPET) reactions can access reaction pathways with lower reaction barriers compared to stepwise pathways involving electron transfer (ET) and proton transfer (PT). To realize reductive multielectron/proton transformations involving CPET, one approach that has shown recent promise involves coupling a cobaltocene ET site with a protonated arylamine Brønsted acid PT site. This strategy colocalizes the electron/proton in a matter compatible with a CPET step and net reductive electrocatalysis. To probe the generality of such an approach a class of C,C'-diaryl-o-carboranes is herein explored as a conceptual substitute for the cobaltocene subunit, with an arylamine linkage still serving as a colocalized Brønsted base suitable for protonation. The featured o-carborane (PhCbPhN) can be reduced and protonated to generate an N-H bond with a weak effective bond dissociation free energy (BDFEeff) of 31 kcal/mol, estimated with measured thermodynamic data. This N-H bond is among the lowest measured element-H bonds for analyzed nonmetal compounds. Distinct solid-state crystal structures of the one- and two-electron reduced forms of diaryl-o-carboranes are disclosed to gain insight into their well-behaved redox characteristics. The singly reduced, protonated form of the diaryl-o-carborane can mediate multi-ET/PT reductions of azoarenes, diphenylfumarate, and nitrotoluene. In contrast to the aforementioned cobaltocene system, available mechanistic data disclosed herein support these reactions occurring by a rate-limiting ET step and not a CPET step. A relevant hydrogen evolution reaction (HER) reaction was also studied, with data pointing to a PT/ET/PT mechanism, where the reduced carborane core is itself highly stable to protonation.

Tuning the Thermochemistry and Reactivity of a Series of Cu-Based 4H+/4e- Electron-Coupled-Proton Buffers.

Electron-coupled-proton buffers (ECPBs) store and deliver protons and electrons in a reversible fashion. We have recently reported an ECPB based on Cu and a redox-active ligand that promoted 4H+/4e- reversible transformations (J. Am. Chem. Soc. 2022, 144, 16905). Herein, we report a series of Cu-based ECPBs in which the ability of these to accept and/or donate H• equivalents can be tuned via ligand modification. The thermochemistry of the 4H+/4e- ECPB equilibrium was determined using open-circuit potential measurements. The reactivity of the ECPBs against proton-coupled electron transfer (PCET) reagents was also analyzed, and the results obtained were rationalized based on the thermochemical parameters. Experimental and computational analysis of the thermochemistry of the H+/e- transfers involved in the 4H+/4e- ECPB transformations found substantial differences between the stepwise (namely, BDFE1, BDFE2, BDFE3, and BDFE4) and average bond dissociation free energy values (BDFEavg.). Our analysis suggests that this "redox unleveling" is critical to promoting the disproportionation and ligand-exchange reactions involved in the 4H+/4e- ECPB equilibria. The difference in BDFEavg. within the series of Cu-based ECPBs was found to arise from a substantial change in the redox potential (E1/2) upon modification of the ligand scaffold, which is not fully compensated for by a change in the acidity/basicity (pKa), suggesting "thermochemical decompensation".

Intermolecular Proton-Coupled Electron Transfer Reactivity from a Persistent Charge-Transfer State for Reductive Photoelectrocatalysis.

Interest in applying proton-coupled electron transfer (PCET) reagents in reductive electro- and photocatalysis requires strategies that mitigate the competing hydrogen evolution reaction. Photoexcitation of a PCET donor to a charge-separated state (CSS) can produce a powerful H-atom donor capable of being electrochemically recycled at a comparatively anodic potential corresponding to its ground state. However, the challenge is designing a mediator with a sufficiently long-lived excited state for bimolecular reactivity. Here, we describe a powerful ferrocene-derived photoelectrochemical PCET mediator exhibiting an unusually long-lived CSS (τ ∼ 0.9 μs). In addition to detailed photophysical studies, proof-of-concept stoichiometric and catalytic proton-coupled reductive transformations are presented, which illustrate the promise of this approach.

Evaluation of Organic Hydride/Acid Pairs as a Type of Thermodynamic-Potential-Regulated Multisite Proton-Coupled Electron Transfer Reagents.

Organic hydride/acid pairs have been reported as multisite proton-coupled electron transfer (MS-PCET) reagents in reductive MS-PCET reactions recently. Since the key step for an organic hydride/acid pair acting as an MS-PCET reagent is a chemical process of the organic hydride/acid pair releasing a formal hydrogen atom, the bond dissociation free energy of the organic hydride/acid pair releasing a formal hydrogen atom is a valuable thermodynamic parameter for objectively evaluating the thermodynamic potential for an organic hydride/acid pair to act as an MS-PCET reagent. Now, organic hydride/acid pairs of 216 organic hydrides have been demonstrated to be a potential type of thermodynamically potential-regulated MS-PCET reagent. Without a doubt, organic hydride/acid pairs reflect the change of N-substituted organic hydrides from simple hydride reductants to thermodynamically-regulated MS-PCET reagents, which could significantly expand the availability of novel MS-PCET reagents.

Visible Light-Induced 1,2-Diphenyldisulfane-Mediated Defluoroborylation of Polyfluoroarenes.

A green and practical protocol of defluoroborylation of polyfluoroarenes with stable and readily accessible NHC-borane was developed, using 1,2-diphenyldisulfane as a hydrogen atom transfer (HAT) and single electron transfer (SET) reagent precursor under visible-light irradiation, leading to the concise formation of value-added fluorinated organoboron scaffolds. Mechanism studies revealed the method underwent a boryl radical addition reaction with polyfluoroarene, followed by successive single electron transfer pathways and defluorination of the C-F bond to offer the targeted product. This unprecedented platform relies on 1,2-diphenyldisulfane and base without using expensive photocatalysts, highlighting the methodology has promising application value to prepare borylated polyfluoroarene compounds.

Photocatalytic aerobic thiocyanation/sulfonylation of alkynes by D-A type COFs: Enhanced generation of superoxide and sulfur-based radicals via building units adjusted band structures

Photocatalytic radical-mediated aerobic thiocyanation/sulfonylation of alkynes represents the most straightforward and atom-economic method to synthesize α-thiocyanate/sulfonyl ketones. The core issue is the generation of desired thiocyanate/sulfonyl radicals and their subsequent conversion into target products. In this work, three polyimide-based donor–acceptor COFs, named TAPB-PMDA, TTA-PMDA, and TTA-NDA, respectively, have been prepared for the photosynthesis of α-thiocyanate/sulfonyl ketones. Based on efficient adjusting electron donor-accept capacity of building units, TTA-NDA possesses broader visible absorption, richer redox properties, faster carrier separation efficiency and shows higher photocatalytic activity in thiocyanation/sulfonylation of alkynes under blue LED light illumination. Control experiments and EPR tests provide insight into the tandem radical addition/cross-coupling mechanism, in which the thiocyanate/sulfonyl radicals generation via h+ oxidation and the reactive oxygen species (ROS, e.g. •OH, H2O2, 1O2, O2•−) production by e− reduction carry out simultaneously, avoiding the employing of electron sacrificial agents or extra additives as precursors of singe electron transfer reagents. This operable strategy opens up a door for the difunctionalization of alkynes in photosynthetic manner.

A Nickel Complex with a Proton-Responsive PNP Pincer-Type Ligand as a Proton-Coupled Electron Transfer Reagent

A Nickel Complex with a Proton-Responsive PNP Pincer-Type Ligand as a Proton-Coupled Electron Transfer Reagent

Dioxygen‐Triggered β‐Hydroxysulfonylation of Terminal Olefins Controlled by DABCO

AbstractA dioxygen‐triggered selectively difunctionalization of olefins to achieve β‐hydroxysulfones has been developed. Particularly, the mechanism of this reaction can be controlled by DABCO, which act as a single electron transfer reagent, to selectively obtain ketosulfone or hydroxysulfone. The reaction was conducted in a clean, safe, mild, and catalyst‐free conditions. Moreover, as a proof‐of‐concept, two bioactive molecules were synthesized easily using this method.

Coupling Titanium and Chromium Catalysis in a Reaction Network for the Reprogramming of [BH4 ]- as Electron Transfer and Hydrogen Atom Transfer Reagent for Radical Chemistry.

We describe a unique catalytic system with an efficient coupling of Ti- and Cr-catalysis in a reaction network that allows the use of [BH4 ]- as stoichiometric hydrogen atom and electron donor in catalytic radical chemistry. The key feature is a relay hydrogen atom transfer from [BH4 ]- to Cr generating the active catalysts under mild conditions. This enables epoxide reductions, regiodivergent epoxide opening and radical cyclizations that are not possible with cooperative catalysis with radicals or by epoxide reductions via Meinwald rearrangement and ensuing carbonyl reduction. No typical SN 2-type reactivity of [BH4 ]- salts is observed.

Coupling Titanium and Chromium Catalysis in a Reaction Network for the Reprogramming of [BH4]− as Electron Transfer and Hydrogen Atom Transfer Reagent for Radical Chemistry

AbstractWe describe a unique catalytic system with an efficient coupling of Ti‐ and Cr‐catalysis in a reaction network that allows the use of [BH4]− as stoichiometric hydrogen atom and electron donor in catalytic radical chemistry. The key feature is a relay hydrogen atom transfer from [BH4]− to Cr generating the active catalysts under mild conditions. This enables epoxide reductions, regiodivergent epoxide opening and radical cyclizations that are not possible with cooperative catalysis with radicals or by epoxide reductions via Meinwald rearrangement and ensuing carbonyl reduction. No typical SN2‐type reactivity of [BH4]− salts is observed.

Sm(II)-Mediated Proton-Coupled Electron Transfer: Quantifying Very Weak N-H and O-H Homolytic Bond Strengths and Factors Controlling Them.

Coordination of alcohols to the single-electron reductant samarium diiodide (SmI2) results in substantial O-H bond weakening, affording potent proton-coupled electron transfer (PCET) reagents. However, poorly defined speciation of SmI2 in tetrahydrofuran (THF)/alcohol mixtures limits reliable thermodynamic analyses of such systems. Rigorous determination of bond dissociation free energy (BDFE) values in such Sm systems, important to evaluating their reactivity profiles, motivates studies of model Sm systems where contributing factors can be teased apart. Here, a bulky and strongly chelating macrocyclic ligand ((tBu2ArOH)2Me2cyclam) maintains solubility, eliminates dimerization pathways, and facilitates clean electrochemical behavior in a well-defined functional model for the PCET reactivity of SmII with coordinating proton sources. Direct measurement of thermodynamic parameters enables reliable experimental estimation of the BDFEs in 2-pyrrolidone and MeOH complexes of ((tBu2ArO)2Me2cyclam)SmII, thereby revealing exceptionally weak N-H and O-H BDFEs of 27.2 and <24.1 kcal mol-1, respectively. Expanded thermochemical cycles reveal that this bond weakening stems from the very strongly reducing SmII center and the formation of strong SmIII-alkoxide (and -pyrrolidonate) interactions in the PCET products. We provide a detailed analysis comparing these BDFE values with those that have been put forward for SmI2 in THF in the presence of related proton donors. We suggest that BDFE values for the latter systems may in fact be appreciably higher than the system described herein. Finally, protonation and electrochemical reduction steps necessary for the regeneration of the PCET donors from SmIII-alkoxides are demonstrated, pointing to future strategies aimed at achieving (electro)catalytic turnover using SmII-based PCET reagents.

Recent Advances to Mediate Reductive Processes of Nitroarenes Using Single-Electron Transfer, Organomagnesium, or Organozinc Reagents.

Recent advances in the development of reductive reactions of nitroarenes using organomagnesium-, organozinc-, and single electron transfer reagents is discussed within this review. The review is divided into the following sections: IntroductionOrganomagnesium-mediated reductive reactionsOrganozinc- and zinc-mediated reductive reactionsIodine-catalyzed redox cyclizationsTitanium(III)-mediated reductive cyclizationsSulfur-mediated reductive reactionsAlkoxide-mediated reductive reactions4,4'-Bipyridine-mediated reductive reactionsVisible light-driven reductive amination reactionsElectrochemical reductive reactionsConclusion.

Aqueous TiO2 Nanoparticles React by Proton-Coupled Electron Transfer.

Redox reactions of aqueous colloidal TiO2 4 nm nanoparticles (NPs) have been examined, including both citrate-capped and uncapped NPs (c-TiO2 and uc-TiO2). Photoreduction gave stable blue colloidal c-TiO2R NPs with 10-60 electrons per particle. Equilibration of these reduced NPs with soluble redox reagents such as methylviologen (MV2+) provided measurements of the colloid reduction potential as a function of pH. The potentials of c-TiO2 from pH 2-9 varied linearly with pH, with a slope of -60 ± 5 mV/pH. Estimates of the potential at pH 12 were consistent with extrapolating that line to high pH. The reduction potentials did not correlate with the zeta potentials (ζ) or the surface charge of the NPs across this pH range. Similar reduction potentials were observed for c- and uc-TiO2 at low pH even though they have quite different ζ potentials. These results show that the common surface-charging explanation of the pH dependence is not tenable in these systems. Oxidation of reduced c-TiO2R with the electron-transfer oxidant potassium triiodide (KI3) occurred with a significant drop in pH, showing that protons were released when the electrons were removed from the NPs. Smaller pH drops were observed for the proton-coupled electron transfer (PCET) reagents O2 (air) and 4-MeO-TEMPO (4-methoxy-2,2,6,6-tetramethylpiperine-1-oxy radical). The difference in the number of protons released with KI3 vs O2 and 4-MeO-TEMPO was roughly one proton per electron removed. Thus, the thermodynamically preferred reactivity of these colloidal TiO2 NPs is PCET over the pH 2-13 range studied. The measured redox potentials refer to the chemical process TiO2 + H+ + e- → TiO2·e-,H+; and therefore they do not correspond with an electronic energy such as a conduction band edge or flat band potential. The 1e-/1H+ stoichiometry means that the TiO2 reduction potentials correspond to a TiO2-H bond dissociation free energy (BDFE), determined to be 49 ± 2 kcal mol-1. The PCET description is consistent with the pH dependence of E(TiO2/TiO2·e-,H+), the release of protons upon oxidation, the lack of correlation with ζ potentials, the similarity of capped and uncapped NPs, and the small change in the potential and BDFE from the first to the last electron/proton pair (H atom) removed. This behavior is suggested to be the norm for redox-active oxide/water interfaces.

Free Energies of Proton-Coupled Electron Transfer Reagents and Their Applications.

We present an update and revision to our 2010 review on the topic of proton-coupled electron transfer (PCET) reagent thermochemistry. Over the past decade, the data and thermochemical formalisms presented in that review have been of value to multiple fields. Concurrently, there have been advances in the thermochemical cycles and experimental methods used to measure these values. This Review (i) summarizes those advancements, (ii) corrects systematic errors in our prior review that shifted many of the absolute values in the tabulated data, (iii) provides updated tables of thermochemical values, and (iv) discusses new conclusions and opportunities from the assembled data and associated techniques. We advocate for updated thermochemical cycles that provide greater clarity and reduce experimental barriers to the calculation and measurement of Gibbs free energies for the conversion of X to XHn in PCET reactions. In particular, we demonstrate the utility and generality of reporting potentials of hydrogenation, E°(V vs H2), in almost any solvent and how these values are connected to more widely reported bond dissociation free energies (BDFEs). The tabulated data demonstrate that E°(V vs H2) and BDFEs are generally insensitive to the nature of the solvent and, in some cases, even to the phase (gas versus solution). This Review also presents introductions to several emerging fields in PCET thermochemistry to give readers windows into the diversity of research being performed. Some of the next frontiers in this rapidly growing field are coordination-induced bond weakening, PCET in novel solvent environments, and reactions at material interfaces.

Development in SmI2 Catalyzed Reactions

AbstractSamarium diiodide (SmI2) is a versatile single electron transfer (SET) reagent in organic synthesis. The advantages of SmI2 arise from various additive induced tailoring of reactions to obtain the desired products in a stereoselective fashion. In most instances, this reagent is used in stoichiometric amount, and this poses a significant environmental issue limiting a broader applicability of SmI2. Despite challenges in the developments of catalytic methods, recent studies have paved the way for catalytic strategies rejuvenating the applications of SmI2 in synthetic organic chemistry. This review aims to summarize different methods that are used to develop catalytic reactions of SmI2. A comparison of different approaches and future outlook of this field are discussed.

Proton-Coupled Electron-Transfer Reactivity Controls Iron versus Sulfur Oxidation in Nonheme Iron-Thiolate Complexes.

Reaction of the five-coordinate FeII(N4S) complexes, [FeII(iPr3TACN)(abtX)](OTf) (abt = aminobenzenethiolate, X = H, CF3), with a one-electron oxidant and an appropriate base leads to net H atom loss, generating new FeIII(iminobenzenethiolate) complexes that were characterized by single-crystal X-ray diffraction (XRD), as well as UV-vis, EPR, and Mössbauer spectroscopies. The spectroscopic data indicate that the iminobenzenethiolate complexes have S = 3/2 ground states. In the absence of a base, oxidation of the FeII(abt) complexes leads to disulfide formation instead of oxidation at the metal center. Bracketing studies with separated proton-coupled electron-transfer (PCET) reagents show that the FeII(aminobenzenethiolate) and FeIII(iminobenzenethiolate) forms are readily interconvertible by H+/e- transfer and provide a measure of the bond dissociation free energy (BDFE) for the coordinated N-H bond between 64 and 69 kcal mol-1. This work shows that coordination to the iron center causes a dramatic weakening of the N-H bond and that Fe- versus S-oxidation in a nonheme iron complex can be controlled by the protonation state of an ancillary amino donor.

A Bioinspired Disulfide/Dithiol Redox Switch in a Rhenium Complex as Proton, H Atom, and Hydride Transfer Reagent.

The transfer of multiple electrons and protons is of crucial importance in many reactions relevant in biology and chemistry. Natural redox-active cofactors are capable of storing and releasing electrons and protons under relatively mild conditions and thus serve as blueprints for synthetic proton-coupled electron transfer (PCET) reagents. Inspired by the prominence of the 2e-/2H+ disulfide/dithiol couple in biology, we investigate herein the diverse PCET reactivity of a Re complex equipped with a bipyridine ligand featuring a unique SH···-S moiety in the backbone. The disulfide bond in fac-[Re(S-Sbpy)(CO)3Cl] (1, S-Sbpy = [1,2]dithiino[4,3-b:5,6-b']dipyridine) undergoes two successive reductions at equal potentials of -1.16 V vs Fc+|0 at room temperature forming [Re(S2bpy)(CO)3Cl]2- (12-, S2bpy = [2,2'-bipyridine]-3,3'-bis(thiolate)). 12- has two adjacent thiolate functions at the bpy periphery, which can be protonated forming the S-H···-S unit, 1H-. The disulfide/dithiol switch exhibits a rich PCET reactivity and can release a proton (ΔG°H+ = 34 kcal mol-1, pKa = 24.7), an H atom (ΔG°H• = 59 kcal mol-1), or a hydride ion (ΔG°H- = 60 kcal mol-1) as demonstrated in the reactivity with various organic test substrates.

In Silico Reagent Design for Electron-Transfer Dissociation on a Q-TOF.

Electron-transfer dissociation is an important technique capable of probing the primary and higher order structure of a wide variety of biomolecules and yielding information that is often inaccessible using other common MS methods. The source of the electron used to initiate the fragmentation event is a radical anion, and the fragmentation process therefore depends intimately on the electronic properties of both the reagent and analyte ions. A good reagent must ionize easily and be sufficiently robust to survive transport to the reaction location, but must also be capable of donating an electron to analyte cations efficiently enough to overcome competition with other ion-ion reaction channels. Inspired by the work of Gunawardena et al. ( J. Am. Chem. Soc. 2005, 127, 12627), an in silico workflow to allow prescreening of potential electron-transfer reagents for use in glow-discharge sources is described. Approximately 150 candidate molecules have been characterized using this workflow. We discuss in detail the properties of a selected subset of singly and doubly substituted benzenes and introduce five effective new reagents that have been identified as a result of this work.

A Bottleable Imidazole-Based Radical as a Single Electron Transfer Reagent.

Reduction of 1,3-bis(2,6-diisopropylphenyl)-2,4-diphenyl-1H-imidazol-3-ium chloride (1) resulted in the formation of the first structurally characterized imidazole-based radical 2. 2 was established as a single electron transfer reagent by treating it with an acceptor molecule tetracyanoethylene. Moreover, radical 2 was utilized as an organic electron donor in a number of organic transformations such as in activation of an aryl-halide bond, alkene hydrosilylation, and in catalytic reduction of CO2 to methoxyborane, all under ambient temperature and pressure.

Room-Temperature Synthesis of Isoindolone Spirosuccinimides: Merger of Visible-Light Photocatalysis and Cobalt-Catalyzed C-H Activation.

A room-temperature C-H bond functionalization of benzamides has been developed by merging a photocatalyst with a cobalt catalyst for the synthesis of isoindolone spirosuccinimides. The reaction proceeds in aerobic conditions and does not require any sacrificial external oxidants such as Ag(I) or Mn(III) salts. Visible light activates the photocatalyst, and it acts as an electron-transfer reagent and helps in the fundamental organometallic steps by modulating the oxidation state of the cobalt complex. This C-H bond functionalization and spirocyclization showed wide substrate scope and good functional group tolerance. A possible reaction mechanism was proposed from the experimental outcome, showing that C-H bond activation is irreversible and not the rate-determining step.