Electron Transfer Reactions Research Articles

An acetate electrolyte for enhanced pseudocapacitve capacity in aqueous ammonium ion batteries

Ammonium ion batteries are promising for energy storage with the merits of low cost, inherent security, environmental friendliness, and excellent electrochemical properties. Unfortunately, the lack of anode materials restricts their development. Herein, we utilized density functional theory calculations to explore the V2CTx MXene as a promising anode with a low working potential. V2CTx MXene demonstrates pseudocapacitive behavior for ammonium ion storage, delivering a high specific capacity of 115.9 mAh g−1 at 1 A g−1 and excellent capacity retention of 100% after 5000 cycles at 5 A g−1. In-situ electrochemical quartz crystal microbalance measurement verifies a two-step electrochemical process of this unique pseudocapacitive storage behavior in the ammonium acetate electrolyte. Theoretical simulation reveals reversible electron transfer reactions with [NH4+(HAc)3]···O coordination bonds, resulting in a superior ammonium ion storage capacity. The generality of this acetate ion enhancement effect is also confirmed in the MoS2-based ammonium-ion battery system. These findings open a new door to realizing high capacity on ammonium ion storage through acetate ion enhancement, breaking the capacity limitations of both Faradaic and non-Faradaic energy storage.

Catalytic Hydrodehalogenation of Haloarenes: Electron Transfer Reactions and Related Transformations: a Review

Catalytic Hydrodehalogenation of Haloarenes: Electron Transfer Reactions and Related Transformations: a Review

SnS2 nanosheets/Ag2S quantum dots heterojunction supported by YSZ nanofibers enable real-time room-temperature NO2 gas sensor

Air pollution has emerged as a critical global issue, necessitating the development of effective real-time gas monitoring technologies. However, conventional gas sensors face limitations such as high energy consumption and sluggish response/recovery kinetics. In this study, we report a novel SnS2/Ag2S heterojunction supported by yttria-stabilized zirconia nanofibers (YSZ@SnS2/Ag2S) through a facile electrospinning, hydrothermal and subsequent cation-exchange method. This hierarchical composite nanofiber consists of well-distributed Ag2S quantum dots (QDs) attached to vertical anchored SnS2 nanosheets, forming an interconnected network supported by YSZ nanofibers. The integrated sensor exhibited high response of 3.27 and swift response/recovery times of 12/27 s to 1 ppm NO2 at room temperature, respectively. Benefited from highly permeable three-dimensional continuous conductive nanofibers, along with the hierarchical nanosheets/QDs structure, the gas transmission/diffusion and number of reactive sites were ensured. Additionally, the interfacial built-in electric field of SnS2/Ag2S heterojunction further enhanced the electron transfer, carrier migration and gas-sensitive reaction kinetics. This study provides insights into the development of functional composite nanofibers and paves the way for the exploitation of real-time room-temperature gas sensing applications.

Label-Free Electrochemical Immunosensor Based on Conjugated Polymer Film Coated Disposable Electrode for Ultrasensitive Determination of Resistin Potential Obesity Biomarker.

A new label-free immunosensor was designed for sensitive detection of resistin obesity biomarker in human biological fluids. To construct a sensing interface, the monomer of double epoxy groups-substituted thiophene (TdiEpx) was synthesized for the fabrication of the biosensing system. A disposable indium tin oxide sheet was first modified by electrochemical polymerization of the TdiEpx monomer, and this robust and novel surface was characterized using different spectroscopic and electrochemical analyses. The double epoxy ends were linked to the amino ends of anti-resistin, and they served as binding points for the covalent binding of biomolecules. The double epoxy ends present in each TdiEpx monomer ensured an extensive surface area, which improved the quantity of attached anti-resistin. The determination of resistin antigen was based on the specific coupling of resistin with anti-resistin, and this interaction hindered the electron transfer reaction. The immunosensor introduced a wide linear range of 0.0125-15 pg/mL, a low detection limit of 4.17 fg/mL, and an excellent sensitivity of 1.38 kohm pg mL-1 cm2. In this study, a sandwich enzyme-linked immunosorbent assay spectrophotometric method was utilized as a reference technique for the quantitative analysis of resistin in human serum and saliva samples. Both measurements in clinical samples displayed correlations and high-correlation coefficients. In addition, this immunosensor had good storage stability, acceptable repeatability and reproducibility, high specificity, and good accuracy. The proposed immunosensor provided a simple and versatile impedimetric immunosensing platform and a promisingly sensitive way for clinical applications.

Exploitation of carbon surface functionality toward additive‐free formation of gold nanocuboids suitable for sensitive assay of N‐acetylcysteine in pharmaceutical formulations

AbstractChemical additive and physical template‐free electrochemical methods to prepare carbon‐supported nanostructures of catalyst metals represent an emerging technology. Formation of the metal nano/microstructures depends not only on the electrochemical method/parameters but also on the nature of the underlying carbon material. Here, we present a comparative evolution of unevenly distributed coral‐like aggregates of nanocuboid‐shaped gold nanostructures (AuNCBs) on the oxidised form of boron, nitrogen‐doped carbon nanoonions (oxi‐B,N‐CNO) compared to evenly distributed bud‐like aggregates of cubic shaped gold nanostructures on bare glassy carbon electrode under a similar electrochemical approach. The synthesis method provided the best availability of the surface active sites, whereas the shape of the structures showed a direct influence of both outer‐sphere and inner‐sphere electron transfer reactions. The higher sensitivity of AuNCBs@oxi‐B,N‐CNO compared to individual components and bare carbon/gold electrodes toward the inner‐sphere oxidative reaction of N‐acetyl‐L‐cysteine (NAC) was exploited in order to develop an electrochemical assay method with sensitivity and linear dynamic range of (4.70 ± 0.25) × 10−4 C∙cm−2∙mM−1 and 0.2–2.5 mM, respectively in acetate buffer (pH 4.45). Furthermore, the sensor design was deployed in the quantitation of NAC in pharmaceutical preparations, resulting in 89%–106% recovery.

Incorporation of Ruthenium Ions into Nanometer-Thick Films of Copper Sulfide by Anodization for Proton-Coupled Electron Transfer Reactions

Incorporation of Ruthenium Ions into Nanometer-Thick Films of Copper Sulfide by Anodization for Proton-Coupled Electron Transfer Reactions

Electrocatalytic Effects of Au Nanoclusters in Its Electrochemiluminescence Enhanced by Coreactant Tertiary Amines

AbstractAtomically precise metal nanoclusters are increasingly exploited in electrocatalysis such as water electrolysis and CO2 reduction. The catalytic effects are generally evaluated by conventional electrochemical methods or end‐product analysis. Herein, near infrared electrochemiluminescence (ECL) of the nanoclusters is introduced as a new signaling mechanism to complement classical voltammetric analysis for elucidating essential electrocatalytic parameters. Coreactant ECL from an aqueous soluble Au22 nanocluster (NCs) enhanced by a common pH buffer materials 4‐(2‐hydroxyethyl)‐1‐piperazineethanesulfonic acid (HEPES) and by a piperazine drug hydroxyzine (HDZ) is studied under oxidative reduction pathways. Foot of the wave analysis on voltametric features and the kinetics profiles in potential‐step experiments are studied in different nanocluster and coreactant concentrations. Benchmark parameters such as rate constants are determined under EC (Electron‐transfer‐Chemical‐reaction) mechanism as feasibility validations. Because the luminescence properties of AuNCs are sensitive to the surface ligands or adsorbents, ECL is proposed as a new signal readout for operando studies providing insights for governing reaction mechanism and kinetics during catalytic reactions. Retrospectively, mechanistic understanding of the complex multi‐step reactions during ECL generation can provide guidance for the evaluation and optimization of ECL property for better quantitative applications.

Effect of biochar on the SPNA system at ambient temperatures

Biochar has been extensively studied in wastewater treatment systems. However, the role of biochar in the single-stage partial nitritation anammox (SPNA) system remains not fully understood. This study explored the impact of biochar on the SPNA at ambient temperatures (20 °C and 15 °C). The nitrogen removal rate of the system raised from 0.43 to 0.50 g N/(L·d) as the biochar addition was raised from 2 to 4 g/L. Metagenomic analysis revealed that gene abundances of amino sugar metabolism and nucleotide sugar metabolism, amino acid metabolism, and quorum sensing were decreased after the addition of biochar. However, the gene abundance of enzymes synthesizing NADH and trehalose increased, indicating that biochar could stimulate electron transfer reactions in microbial metabolism and assist microorganisms in maintaining a steady state at lower temperatures. The findings of this study provide valuable insights into the mechanism behind the improved nitrogen removal facilitated by biochar in the single-stage partial nitritation anammox system.

Exploring binding affinity of 1-n-Alkyl-3-methylimidazolium chloride with iron porphyrin and electron uptake ability of the ionic liquid-FeP complex

Interaction of ionic liquids with iron porphyrin (FeP) arises in a number of application of ionic liquids such as dye-sensitized solar cells, batteries, and conversion of CO2 to value-added products, etc. Furthermore, ionic liquid-FeP interactions are thought to be responsible for ionic liquid biodegradation and catalytic breakdown of ionic liquids. Despite the importance of ionic liquid-FeP interactions, there is a lack of information on what conformations ionic liquids adopt when presented to FeP and how thermodynamics of subsequent electron transfer reaction is affected. To begin to answer these questions, electronic structure calculations are performed to assess how the binding propensity of the homologous series of 1-n-alkyl-3-methylimidazolium [Cnmim]Cl (n = 2, 4, 6, 8, 10) to FeP is affected as the alkyl chain length and the initial conformation of the cation presented to FeP are varied. The conceptual density functional theory framework is then invoked to compute the electrophilicity index of the ionic liquid-FeP complex to glean insight into the ability of the complex to acquire an electron. Calculations suggest two equally likely conformations of ionic liquids with similar Gibbs free energy change; however, the enthalpic and entropic contributions differ based on the conformation adopted by ionic liquids which in turn affects the propensity of the subsequent electron transfer process. The importance of results is discussed in terms of experimentally observed alkyl chain length-dependent biodegradability of ionic liquids.

PbO2 reductive dissolution by dissolved Mn(III) in the presence of low molecular weight organic acids and humic acid.

Although Mn(III) complexes with organic ligands have been previously identified, the information about their stability and reactivity is scarce. In the present study, we analyzed the formation and stability of three different complexes: Mn(III)-citrate, Mn(III)-tartrate, and Mn(III)-humic acid (HA), as well as their reactivity toward an element of high environmental concern, lead (Pb).Our results indicate that the stability of studied complexes is highly dependent on pH. The Mn(III) complexes with citrate and tartrate degrade below pH 8, due to the electron transfer reaction between Mn(III) and the ligand, while the Mn(III)-HA complex's degradation is slower and less sensitive to pH. At pH 4, less than 40% of the initial Mn(III)-HA was found to be stable.The reactivity of the complexes was different depending on the ligand and its concentration. The Mn(III)-citrate and Mn(III)-tartrate complexes effectively reduced PbO2 and releases aqueous Pb2+, although significant differences were found with increasing ligand concentration. There was no evidence of the reduction of PbO2 by Mn(III) when it forms a complex with HA. This is likely due to the large size of HA moieties that prevent the Mn(III) component of the complex from getting close enough to the PbO2 surface to initiate electron transfer and lead to the reduction of Pb(IV) by HA itself.

Plutonium mobility and reactivity in a heterogeneous clay rock barrier accented by synchrotron-based microscopic chemical imaging

The long-term safe disposal of radioactive waste corresponds to a challenging responsibility of present societies. Within deep geological waste disposal concepts, host rocks correspond to the ultimate safety barrier towards the environment. To assess the performance of such barriers over extended time scales, mechanistic information on the interaction between the radiotoxic, long-lived radionuclides like plutonium and the host rock is essential. Chemical imaging based on synchrotron microspectroscopic techniques was used to visualize undisturbed reactive transport patterns of Pu within pristine Opalinus Clay rock material. Pu+V is shown to be progressively reduced along its diffusion path to Pu+IV and Pu+III due to interaction with redox-active clay rock constituents. Experimental results and modeling emphasize the dominant role of electron-transfer reactions determining the mobility of Pu in reactive barrier systems. The effective migration velocity of Pu is controlled by the kinetic rates of the reduction to Pu+IV and Pu+III and the redox capacity of the involved electron donor pools. To advance our predictive capabilities further, an improved understanding of the nature and capacity of redox-active components of the reactive barrier material is fundamental. The findings represent an essential contribution to the evaluation of the long-term safety of potential nuclear waste repositories and have implications regarding the development of effective geological disposal strategies.

Probing Nonadiabaticity of Proton-Coupled Electron Transfer in Ribonucleotide Reductase.

The enzyme ribonucleotide reductase, which is essential for DNA synthesis, initiates the conversion of ribonucleotides to deoxyribonucleotides via radical transfer over a 32 Å pathway composed of proton-coupled electron transfer (PCET) reactions. Previously, the first three PCET reactions in the α subunit were investigated with hybrid quantum mechanical/molecular mechanical (QM/MM) free energy simulations. Herein, the fourth PCET reaction in this subunit between C439 and guanosine diphosphate (GDP) is simulated and found to be slightly exoergic with a relatively high free energy barrier. To further elucidate the mechanisms of all four PCET reactions, we analyzed the vibronic and electron-proton nonadiabaticities. This analysis suggests that interfacial PCET between Y356 and Y731 is vibronically and electronically nonadiabatic, whereas PCET between Y731 and Y730 and between C439 and GDP is fully adiabatic and PCET between Y730 and C439 is in the intermediate regime. These insights provide guidance for selecting suitable rate constant expressions for these PCET reactions.

Self-immolation Assisted Morphology Transformation of Prebiotic Lipidated-cationic Amino Acids: Electro-droplet Mediated C-C Coupling Reaction to Synthesize Macromolecules.

Compartmentalization protected biomolecules from the fluctuating environments of early Earth. Although contemporary cells mostly use phospholipid-based bilayer membranes, the utility of non-bilayer compartments was not ruled out during the prebiotic and modern eras. In the present study, we demonstrated the prebiotic synthesis of lipidated cationic amino acid-based amphiphiles [lauryl ester of lysine (LysL); ornithine (OrnL); and 2,4-diamino butyric acid (DabL)] using model dry-down reaction. These amphiphiles self-assemble into micellar membranes. However, the OrnL and DabL-based micelles undergo pH-responsive transformation to lipid droplet-like morphologies, a modelcompartment in the prebiotic Earth. These cationic droplets encapsulated prebiotic molecules (isoprene) and assisted electron transfer reaction to synthesize isoprenoid derivatives at primitive Earth conditions. The self-assembly of prebiotic amphiphiles, their transformation to droplet compartments, and droplet-assisted C-C bond formation reaction might have helped the evolution to synthesize various biomolecules required for the origin of life.

Symmetrical Localized Built-in Electric Field by Induced Polarization Effect in Ionic Covalent Organic Frameworks for Selective Imaging and Killing Bacteria.

Photocatalytic materials are some of the most promising substitutes for antibiotics. However, the antibacterial efficiency is still inhibited by the rapid recombination of the photogenerated carriers. Herein, we design a cationic covalent organic framework (COF), which has a symmetrical localized built-in electric field due to the induced polarization effect caused by the electron-transfer reaction between the Zn-porphyrin unit and the guanidinium unit. Density functional theory calculations indicate that there is a symmetrical electrophilic/nucleophilic region in the COF structure, which results from increased electron density around the Zn-porphyrin unit. The formed local electric field can further inhibit the recombination of photogenerated carriers by driving rapid electron transfer from Zn-porphyrin to guanidinium under light irradiation, which greatly increases the yield of reactive oxygen species. This COF wrapped by DSPE-PEG2000 can selectively target the lipoteichoic acid of Gram-positive bacteria by electrostatic interaction, which can be used for selective discrimination and imaging of bacteria. Furthermore, this nanoparticle can rapidly kill Gram-positive bacteria including 99.75% of Staphylococcus aureus and 99.77% of Enterococcus faecalis at an abnormally low concentration (2.00 ppm) under light irradiation for 20 min. This work will provide insight into designing photoresponsive COFs through engineering charge behavior.

Origin of the multi-phasic quenching dynamics in the BLUF domains across the species

Blue light using flavin (BLUF) photoreceptors respond to light via one of nature’s smallest photo-switching domains. Upon photo-activation, the flavin cofactor in the BLUF domain exhibits multi-phasic dynamics, quenched by a proton-coupled electron transfer reaction involving the conserved Tyr and Gln. The dynamic behavior varies drastically across different species, the origin of which remains controversial. Here, we incorporate site-specific fluorinated Trp into three BLUF proteins, i.e., AppA, OaPAC and SyPixD, and characterize the percentages for the Wout, WinNHin and WinNHout conformations using 19F nuclear magnetic resonance spectroscopy. Using femtosecond spectroscopy, we identify that one key WinNHin conformation can introduce a branching one-step proton transfer in AppA and a two-step proton transfer in OaPAC and SyPixD. Correlating the flavin quenching dynamics with the active-site structural heterogeneity, we conclude that the quenching rate is determined by the percentage of WinNHin, which encodes a Tyr-Gln configuration that is not conducive to proton transfer.

Electrochemical measurement of the electronic structure of graphene via quantum mechanical rate spectroscopy

Quantum-rate theory defines a quantum mechanical rate ν that complies with the Planck–Einstein relationship E=hν, where ν=e2/hCq is a frequency associated with the quantum capacitance Cq, and E=e2/Cq is the energy associated with ν. Previously, this definition of ν was successfully employed to define a quantum mechanical meaning for the electron-transfer (ET) rate constant of redox reactions, wherein faradaic electric currents involved with ET reactions were demonstrated to be governed by relativistic quantum electrodynamics at room temperature (Bueno, 2023c).This study demonstrated that the definition of ν entails the relativistic quantum electrodynamics phenomena intrinsically related to the perturbation of the density-of-states dn/dE=Cq/e2 by an external harmonic oscillatory potential energy variation. On this basis, the electronic structure of graphene embedded in an electrolyte environment was computed. The electronic structure measured using quantum-rate spectroscopy (QRS) is in good agreement with that measured through angle-resolved photo-emission spectroscopy (ARPES) or calculated via computational density-functional theory (DFT) methods.Electrochemical QRS has evident experimental advantages over ARPES. For instance, QRS enables obtaining the electronic structure of graphene at room temperature and in an electrolyte environment, whereas ARPES requires low temperature and ultrahigh-vacuum conditions. Furthermore, QRS can operate in-situ using a hand-held, inexpensive piece of equipment, whereas ARPES necessarily requires expensive and cumbersome apparatus.

A molecular-level mechanistic framework for interfacial proton-coupled electron transfer kinetics.

Electrochemical proton-coupled electron transfer (PCET) reactions can proceed via an outer-sphere electron transfer to solution (OS-PCET) or through an inner-sphere mechanism by interfacial polarization of surface-bound active sites (I-PCET). Although OS-PCET has been extensively studied with molecular insight, the inherent heterogeneity of surfaces impedes molecular-level understanding of I-PCET. Herein we employ graphite-conjugated carboxylic acids (GC-COOH) as molecularly well-defined hosts of I-PCET to isolate the intrinsic kinetics of I-PCET. We measure I-PCET rates across the entire pH range, uncovering a V-shaped pH-dependence that lacks the pH-independent regions characteristic of OS-PCET. Accordingly, we develop a mechanistic model for I-PCET that invokes concerted PCET involving hydronium/water or water/hydroxide donor/acceptor pairs, capturing the entire dataset with only four adjustable parameters. We find that I-PCET is fourfold faster with hydronium/water than water/hydroxide, while both reactions display similarly high charge transfer coefficients, indicating late proton transfer transition states. These studies highlight the key mechanistic distinctions between I-PCET and OS-PCET, providing a framework for understanding and modelling more complex multistep I-PCET reactions critical to energy conversion and catalysis.

An Investigation of the Influence of Tyrosine Local Interactions on Electron Hopping in a Model Protein.

Multi-step electron transfer reactions are important to the function of many cellular systems. The ways in which such systems have evolved to direct electrons along specific pathways are largely understood, but less so are the ways in which the reduction-oxidation potentials of individual redox sites are controlled. We prepared a series of three new artificial variants of Pseudomonas aeruginosa azurin where a tyrosine (Tyr109) is situated between the native Cu ion and a Ru(II) photosensitizer tethered to a histidine (His107). Arginine, glutamine, or methionine were introduced as position 122, which is near to Tyr109. We investigated the rate of CuI oxidation by a flash-quench generated Ru(III) oxidant over pH values from 5 to 9. While the identity of the residue at position 122 affects some of the physical properties of Tyr109, the rates of CuI oxidation are only weakly dependent on the identity of the residue at 122. The results highlight that more work is still needed to understand how non-covalent interactions of redox active groups are affected in redox proteins.

Infrared Spectroscopy of [M(CO2)n]+ (M = Ca, Sr, and Ba; n = 1-4) in the Gas Phase: Solvation-Induced Electron Transfer and Activation of CO2.

Cationic complexes of heavy alkaline earth metal and carbon dioxide [M(CO2)n]+ (M = Ca, Sr, and Ba) are produced by a laser vaporization-supersonic expansion ion source in the gas phase and are studied by infrared photodissociation spectroscopy in conjunction with quantum chemistry calculations. For the n = 1 complexes, the metal-ligand binding arises primarily from the electrostatic interaction with the CO2 ligand bound to the metal (+I) center in an end-on η1-O fashion. The more highly coordinated complexes [M(CO2)n]+ with n ≥ 2 are characterized to involve a [M2+(CO2-)] core ion with the CO2- ligand bound to the metal (+II) center in a bidentate η2-O, O manner. The activation of CO2 in forming a bent CO2- moiety occurs via solvation-induced metal cation-ligand electron transfer reactions. Bonding analyses reveal that the attractive forces between M2+ and CO2- in the core cation come mainly from electrostatic attraction, but the contribution of covalent orbital interactions should not be underestimated. The atomic orbitals of metal dications that are engaged in the orbital interactions are ns and (n - 1)d orbitals.

Exploring the Unusual Reactivity of the Hydrated Electron with CO2.

Many questions remain about the reactions of the hydrated electron despite decades of study. Of particular note is that they do not appear to follow the Marcus theory of electron transfer reactions, a feature that is yet to be explained. To investigate these issues, we used ab initio molecular dynamics (AIMD) simulations to investigate one of the better studied reactions, the hydrated electron reduction of CO2. The rate constant for the hydrated electron-CO2 reaction complex to react to form CO2- is for the first time estimated from AIMD simulations. Results at 298 and 373 K show the rate constant is insensitive to temperature, consistent with the low measured activation energy for the reaction, and the implications of this behavior are examined. The sampling provided by the simulations yields insight into the reaction mechanism. The reaction is found to involve both solvent reorganization and changes in the carbon dioxide structure. The latter leads to significant vibrational excitation of the bending and symmetric stretch vibrations in the CO2- product, indicating the reaction is vibrationally nonadiabatic. The former is estimated from the calculation of an approximate collective solvent coordinate and the free energy in this coordinate is determined. These results indicate that AIMD simulations can reasonably estimate hydrated electron reaction activation energies and provide new insight into the mechanism that can help illuminate the features of this unusual chemistry.