Electron Interferometry Research Articles

Strong-Field Bloch Electron Interferometry for Band-Structure Retrieval.

When Bloch electrons in a solid are exposed to a strong optical field, they are coherently driven in their respective bands where they acquire a quantum phase as the imprint of the band shape. If an electron approaches an avoided crossing formed by two bands, it may be split by undergoing a Landau-Zener transition. We here employ subsequent Landau-Zener transitions to realize strong-field Bloch electron interferometry, allowing us to reveal band structure information. In particular, we measure the Fermi velocity (band slope) of graphene in the vicinity of the K points as (1.07±0.04) nm fs^{-1}. We expect strong-field Bloch electron interferometry for band structure retrieval to apply to a wide range of material systems and experimental conditions, making it suitable for studying transient changes in band structure with femtosecond temporal resolution at ambient conditions.

Analysis of soft tissue integration-supportive cell functions in gingival fibroblasts cultured on 3D printed biomaterials for oral implant-supported prostheses.

To date, it is unknown whether 3D printed fixed oral implant-supported prostheses can achieve comparable soft tissue integration (STI) to clinically established subtractively manufactured counterparts. STI is mediated among others by gingival fibroblasts (GFs) and is modulated by biomaterial surface characteristics. Therefore, the aim of the present work was to investigate the GF response of a 3D printed methacrylate photopolymer and a hybrid ceramic-filled methacrylate photopolymer for fixed implant-supported prostheses in the sense of supporting an STI. Subtractively manufactured samples made from methacrylate polymer and hybrid ceramic were evaluated for comparison and samples from yttria-stabilized tetragonal zirconia polycrystal (3Y-TZP), comprising well documented biocompatibility, served as control. Surface topography was analyzed by scanning electron microscopy and interferometry, elemental composition by energy-dispersive x-ray spectroscopy, and wettability by contact angle measurement. The response of GFs obtained from five donors was examined in terms of membrane integrity, adhesion, morphogenesis, metabolic activity, and proliferation behavior by a lactate-dehydrogenase assay, fluorescent staining, a resazurin-based assay, and DNA quantification. The results revealed all surfaces were smooth and hydrophilic. GF adhesion, metabolic activity and proliferation were impaired by 3D printed biomaterials compared to subtractively manufactured comparison surfaces and the 3Y-TZP control, whereas membrane integrity was comparable. Within the limits of the present investigation, it was concluded that subtractively manufactured surfaces are superior compared to 3D printed surfaces to support STI. For the development of biologically optimized 3D printable biomaterials, consecutive studies will focus on the improvement of cytocompatibility and the synthesis of STI-relevant extracellular matrix constituents.

Tribo-Mechanical Behavior of Films and Modified Layers Produced by Cathodic Cage and Glow Discharge Plasma Nitriding Techniques

Two surface modification techniques, the glow discharge plasma nitriding (GDPN) and the cathodic cage plasma nitriding (CCPN), were compared regarding the mechanical and tribological behavior of layers produced on AISI 316 stainless-steel surfaces. The analyses were carried out at the micro/nanoscale using nanoindentation and nanoscratch tests. The nitriding temperature (°C) and time (h) parameters were 350/6, 400/6, and 450/6. Morphology, structure, and microstructure were evaluated by X-ray diffraction, scanning electron and optical interferometry microscopies, and energy-dispersive X-ray spectroscopy. GDPN results in stratified modified surfaces, solidly integrated with the substrate, with a temperature-dependent composition comprising nitrides (γ’-Fe4N, ε-Fe2+xN, CrN) and N-solid solution (γN phase). The latter prevails for the low treatment temperatures. Hardness increases from ~2.5 GPa (bare surface) to ~15.5 GPa (450 °C). The scratch resistance of the GDPN-modified surfaces presents a strong correlation with the layer composition and thickness, with the result that the 400 °C condition exhibits the highest standards against microwear. In contrast, CCPN results in well-defined dual-layers for any of the temperatures. A top 0.3–0.8 µm-thick nitride film (most ε-phase), brittle and easily removable under scratch with loads as low as 63 mN, covers a γN-rich case with hardness of 10 GPa. The thickness of the underneath CCPN layer produced at 450 °C is similar to that from GDPN at 400 °C (3 µm); on the other hand, the average roughness is much lower, comparable to the reference surface (Ra ~10 nm), while the layer formation involves no chromium depletion. Moreover, edge effects are absent across the entire sample´s surface. In conclusion, among the studied conditions, the GDPN 400 °C disclosed the best tribo-mechanical performance, whereas CCPN resulted in superior surface finishing for application purposes.

Titanium Coated with Graphene and Niobium Pentoxide for Biomaterial Applications.

Graphene and niobium oxide are used in biomaterial coatings. In this work, commercially pure titanium (cp Ti) was coated with graphene oxide (GO), niobium pentoxide (Nb2O5), and a mixture of both materials (NbGO) by the electrochemical deposition method. The surface morphology, roughness, wettability, and degradation of coated and uncoated samples were analyzed by scanning electron microscopy, interferometry, and contact angle. The results showed that the specimens coated with NbGO (cp Ti-NbGO) showed the highest surface roughness (Ra = 0.64 μm) and were hydrophobic. The contact (θ) angle between water and the surface of uncoated specimens (cp Ti), coated with GO (cp Ti-GO), coated with a mixture with GO and Nb2O5) (cp Ti-NbGO), and coated with Nb2O5 were 50.74°, 44.35°, 55.86°, and 100.35°, respectively. The electrochemical corrosion tests showed that coating with graphene oxide increased the corrosion resistance and coating with Nb2O5 decreased the corrosion resistance. The negative effect of the effect of Nb2O5 coating in corrosion resistance compensated for the release of Nb2O5, which helps osseointegration, increasing cell viability, and proliferation of osteoblasts. The NbGO coating may be a good way to combine the bactericidal effect of graphene oxide with the osseointegration effect of Nb2O5.

Scaling behavior of electron decoherence in a graphene Mach-Zehnder interferometer

Over the past 20 years, many efforts have been made to understand and control decoherence in 2D electron systems. In particular, several types of electronic interferometers have been considered in GaAs heterostructures, in order to protect the interfering electrons from decoherence. Nevertheless, it is now understood that several intrinsic decoherence sources fundamentally limit more advanced quantum manipulations. Here, we show that graphene offers a unique possibility to reach a regime where the decoherence is frozen and to study unexplored regimes of electron interferometry. We probe the decoherence of electron channels in a graphene quantum Hall PN junction, forming a Mach-Zehnder interferometer1,2, and unveil a scaling behavior of decay of the interference visibility with the temperature scaled by the interferometer length. It exhibits a remarkable crossover from an exponential decay at higher temperature to an algebraic decay at lower temperature where almost no decoherence occurs, a regime previously unobserved in GaAs interferometers.

Anisotropic dynamics of two-photon ionization: An attosecond movie of photoemission.

Imaging in real time the complete dynamics of a process as fundamental as photoemission has long been out of reach because of the difficulty of combining attosecond temporal resolution with fine spectral and angular resolutions. Here, we achieve full decoding of the intricate angle-dependent dynamics of a photoemission process in helium, spectrally and anisotropically structured by two-photon transitions through intermediate bound states. Using spectrally and angularly resolved attosecond electron interferometry, we characterize the complex-valued transition probability amplitude toward the photoelectron quantum state. This allows reconstructing in space, time, and energy the complete formation of the photoionized wave packet.

Measurement of Temporal Coherence of Free Electrons by Time-Domain Electron Interferometry.

The temporal properties of an electron beam are decisive for modern ultrafast electron microscopy and for the quantum optics of the free electron in laser fields. Here, we report a time-domain interferometer that measures and distinguishes the pure and ensemble coherences of a free-electron beam in a transmission electron microscope via symmetry-breaking shifts of photon-order sideband peaks. This result is a free-electron analog to the reconstruction of attosecond busts and photoemission delays in optical attosecond spectroscopy. We find a substantial pure electron coherence that is connected to the thermodynamics of the emitter material and a lower ensemble coherence that is governed by space-charge effects. Pure temporal coherences above 5fs are measured at >10^{9} electrons per second in a high-brightness beam.

A tunable Fabry-Pérot quantum Hall interferometer in graphene.

Electron interferometry with quantum Hall edge channels in semiconductor heterostructures can probe and harness the exchange statistics of anyonic excitations. However, charging effects present in semiconductors often obscured the Aharonov-Bohm interference in quantum Hall interferometers and make advanced charge screening strategies necessary. Here, we show that high-mobility monolayer graphene constitutes an alternative material system, not affected by charging effects, to perform Fabry-Pérot quantum Hall interferometry in the integer quantum Hall regime. In devices equipped with gate-tunable quantum point contacts acting on the edge channels of the zeroth Landau level, we observe high-visibility Aharonov-Bohm interference widely tunable through electrostatic gating or magnetic field, in agreement with theory. A coherence length of 10 μm at a temperature of 0.02 K allows us to further achieve coherently-coupled double Fabry-Pérot interferometry. In future, quantum Hall interferometry with graphene devices may enable investigations of anyonic excitations in fractional quantum Hall states.

Attosecond photoionization dynamics in the vicinity of the Cooper minima in argon

Using a spectrally resolved electron interferometry technique, we measure photoionization time delays between the $3s$ and $3p$ subshells of argon over a large 34-eV energy range covering the Cooper minima in both subshells. The observed strong variations of the $3s-3p$ delay difference, including a sign change, are well reproduced by theoretical calculations using the Two-Photon Two-Color Random Phase Approximation with Exchange. Strong shake-up channels lead to photoelectrons spectrally overlapping with those emitted from the $3s$ subshell. These channels need to be included in our analysis to reproduce the experimental data. Our measurements provide a stringent test for multielectronic theoretical models aiming at an accurate description of inter-channel correlation.

Accurate characterization of tip-induced potential using electron interferometry

Using the tip of a scanning probe microscope as a local electrostatic gate gives access to real-space information on electrostatics as well as charge transport at the nanoscale, provided that the tip-induced electrostatic potential is well known. Here, we focus on the accurate characterization of the tip potential, in a regime where the tip locally depletes a two-dimensional electron gas (2DEG) hosted in a semiconductor heterostructure. Scanning the tip in the vicinity of a quantum point contact defined in the 2DEG, we observe Fabry–Pérot interference fringes at low temperature in maps of the device conductance. We exploit the evolution of these fringes with the tip voltage to measure the change in the depletion radius by electron interferometry. We find that a semi-classical finite-element self-consistent model taking into account the conical shape of the tip reaches a faithful correspondence with the experimental data.

Interplay of filling fraction and coherence in symmetry broken graphene p-n junction

Graphene p–n junction (PNJ) with co-propagating spin-valley polarized quantum Hall (QH) edges is a promising platform for studying electron interferometry. Though several conductance measurements have been attempted for such PNJs, the edge dynamics of the spin-valley symmetry broken edge states remain unexplored. In this work, we present the measurements of conductance together with shot noise, an ideal tool to unravel the dynamics, at low temperature, in a dual graphite gated hexagonal boron nitride encapsulated high mobility graphene device. The conductance data show that the symmetry broken QH edges at the PNJ follow spin selective equilibration. The shot noise results as a function of both p and n side filling factors reveal the unique dependence of the scattering mechanism. Remarkably, the scattering is found to be fully tunable from incoherent to coherent regime with the increasing number of QH edges at the PNJ, shedding crucial insights of edge dynamics.

Spin–orbit-resolved spectral phase measurements around a Fano resonance

We apply a spectrally-resolved electron interferometry technique to the measurement of the spectral phase in the vicinity of the 3s13p64p Fano resonance of argon. We show that it allows disentangling the phases of the two nearly-overlapping electron wavepackets corresponding to different spin–orbit final states. Using simple assumptions, it is possible to process the experimental data and numerically isolate each component in a self-consistent manner. This in turn allows reconstructing the autoionization dynamics of the dominant channel.

Nanostructured-membrane electron phase plates

Electron beams can acquire designed phase modulations by passing through nanostructured material phase plates. These phase modulations enable electron wavefront shaping and benefit electron microscopy, spectroscopy, lithography, and interferometry. However, in the fabrication of electron phase plates, the typically used focused-ion-beam-milling method limits the fabrication throughput and hence the active area of the phase plates. Here, we fabricated large-area electron phase plates with electron-beam lithography and reactive-ion-etching. The phase plates are characterized by electron diffraction in transmission electron microscopes with various electron energies, as well as diffractive imaging in a scanning electron microscope. We found the phase plates could produce a null in the center of the bright-field based on coherent interference of diffractive beams. Our work adds capabilities to the fabrication of electron phase plates. The nullification of the direct beam and the tunable diffraction efficiency demonstrated here also paves the way towards novel dark-field electron-microscopy techniques.

Electron interferometry and quantum spin Hall phase in silicene

We discuss devices for detection of the topological insulator phase based on the two-path electron interference. For that purpose we consider buckled silicene for which a local energy gap can be opened by vertical electric field to close one of the paths and for which the quantum spin Hall insulator conditions are controlled by the Fermi energy. In quantum spin Hall phase the interference is absent due to the separation of the spin currents and the conductance of the devices include sharp features related to localized resonances. In the normal transport conditions the two-path interference produces a regular Aharonov-Bohm oscillations in the external magnetic field.

Анализ неразрушающих методов измерения и контроля толщины тонких пленок

The thickness of thin films determines the films’ unique properties, due to which they are widely used in optics and electronics. To measure the thickness of films in the range of 1 nm — 1 mcm during film deposition or on a finished product, it is important that non-destructive measurement methods should be used. An analysis of the most commonly used non-destructive methods for measuring and controlling the thickness of thin films is performed, with a possibility of in situ control of the technological process as well as for testing of finished products. This work describes theoretical and practical considerations of using reflection high-energy electron diffraction, piezoelectricity, interferometry and gravimetric methods for thin film thickness measurements. The results of the study can be used for selecting an optimal method of obtaining thin films when conducting theoretical and applied research.

Efficient two-port electron beam splitter via a quantum interaction-free measurement

Semi-transparent mirrors are standard elements in light optics for splitting light beams or creating two versions of the same image. Such mirrors do not exist in electron optics, although they could be beneficial in existing techniques such as electron interferometry and holography and enable novel electron imaging and spectroscopy techniques. We propose a design for an electron beam splitter using the concept of quantum interaction-free measurement (IFM). The design combines an electron resonator with a weak phase grating. Fast switching gates allow electrons to enter and exit the resonator. While in the resonator, the phase grating transfers intensity from the direct beam into one of the weakly diffracted beams at each pass. To make the beam splitter an efficient two-port splitter, the intensity in all other diffracted beams is blocked by an aperture. The IFM principle minimizes the loss of total intensity by this aperture. We use a scattering matrix method to analyze the performance of the beam splitter, including the effects of inelastic scattering in the phase grating. This design can be generalized to beam splitters for not only electrons, but also photons, neutrons, atoms, and other quantum mechanical systems.

Path-separated electron interferometry in a scanning transmission electron microscope

We report a path-separated electron interferometer within a scanning transmission electron microscope. In this setup, we use a nanofabricated grating as an amplitude-division beamsplitter to prepare multiple spatially separated, coherent electron probe beams. We achieve path separations of 30 nm. We pass the +1 diffraction order probe through amorphous carbon while passing the 0th and −1 orders through vacuum. The probes are then made to interfere via imaging optics, and we observe an interference pattern at the CCD detector with up to 39.7% fringe visibility. We show preliminary experimental results in which the interference pattern was recorded during a 1D scan of the diffracted probes across a test phase object. These results qualitatively agree with a modeled interference predicted by an independent measurement of the specimen thickness. This experimental design can potentially be applied to phase contrast imaging and fundamental physics experiments, such as an exploration of electron wave packet coherence length.

Clinical Evidence of OsseoSpeed EV Implants: A Retrospective Study and Characterization of the Newly Introduced System.

This retrospective study sought to compare a new implant (Astra Tech OsseoSpeed EV) with its predecessor (Astra Tech OsseoSpeed TX) by scanning electron microscopy and interferometry. Radiographic data from 19 patients who underwent implant restoration with EV (n = 49) with a median follow-up of 16 months were evaluated for mean bone level (MBL) changes from delivery of the definitive prosthesis. EV and TX did not differ in surface roughness, and both systems had a tight seal at the implant-abutment interface. The median MBL change of the EV was -0.02 mm mesiodistally after a median follow-up period of 16 months. Greater maintenance of MBL was found in the screw-retained restorations (n = 17) compared to cemented (0.35 ± 0.33 mm and -0.38 ± 0.76 mm, respectively; P = .03). The data suggest that EV shows minimal levels of bone loss and high implant survival.

An investigation into the effects of excipient particle size, blending techniques and processing parameters on the homogeneity and content uniformity of a blend containing low-dose model drug.

Powder blend homogeneity is a critical attribute in formulation development of low dose and potent active pharmaceutical ingredients (API) yet a complex process with multiple contributing factors. Excipient characteristics play key role in efficient blending process and final product quality. In this work the effect of excipient type and properties, blending technique and processing time on content uniformity was investigated. Powder characteristics for three commonly used excipients (starch, pregelatinised starch and microcrystalline cellulose) were initially explored using laser diffraction particle size analyser, angle of repose for flowability, followed by thorough evaluations of surface topography employing scanning electron microscopy and interferometry. Blend homogeneity was evaluated based on content uniformity analysis of the model API, ergocalciferol, using a validated analytical technique. Flowability of powders were directly related to particle size and shape, while surface topography results revealed the relationship between surface roughness and ability of excipient with high surface roughness to lodge fine API particles within surface groves resulting in superior uniformity of content. Of the two blending techniques, geometric blending confirmed the ability to produce homogeneous blends at low dilution when processed for longer durations, whereas manual ordered blending failed to achieve compendial requirement for content uniformity despite mixing for 32 minutes. Employing the novel dry powder hybrid mixer device, developed at Aston University laboratory, results revealed the superiority of the device and enabled the production of homogenous blend irrespective of excipient type and particle size. Lower dilutions of the API (1% and 0.5% w/w) were examined using non-sieved excipients and the dry powder hybrid mixing device enabled the development of successful blends within compendial requirements and low relative standard deviation.

Tribological response and characterization of Mo–W doped DLC coating

DLC coatings and nanostructured carbon coating have been successfully used to prevent against wear and corrosion. Their thermal stability and internal stress have been improved by the addition of transition metals. This work characterizes the surface morphology against two different materials and growth mechanisms of an hydrogen-free carbon coating doped with a W–Mo. The wear resistance is evaluated under dry and room temperature by a set of pin on disc tests at different load and against two different counterfaces, Al2O3 and stainless steel 440C. The as-deposited and worn surfaces were characterized by electron microscopy techniques, interferometry, nanoindentation and Raman spectroscopy. The as-deposited coating presented a hardness of 14GPa and an elastic modulus of 179GPa with a dense surface finished and a columnar structure. The average friction coefficient was between 0.15 and 0.25, with almost no wear on the counterfaces. The W–Mo doped DLC coating showed high resistance against wear with wear rates between 3.79×10−8 mm3N−1m−1 and 2.65×10−7mm3N−1m−1 due to its Mo–W carbide content in the amorphous matrix. A major presence of carbides prevent from adhesion to the counterface by reducing the number of dangling bonds.