Electron-induced Dissociation Research Articles

Unveiling the electron-induced ionization cross sections and fragmentation mechanisms of 3,4-dihydro-2H-pyran.

The interactions of electrons with molecular systems under various conditions are essential to interdisciplinary research fields extending over the fundamental and applied sciences. In particular, investigating electron-induced ionization and dissociation of molecules may shed light on the radiation damage to living cells, the physicochemical processes in interstellar environments, and reaction mechanisms occurring in combustion or plasma. We have, therefore, studied electron-induced ionization and dissociation of the gas phase 3,4-dihydro-2H-pyran (DHP), a cyclic ether appearing to be a viable moiety for developing efficient clinical pharmacokinetics and revealing the mechanisms of biofuel combustion. The mass spectra in the m/z = 10-90 mass range were measured at several different energies of the ionizing electron beam using mass spectrometry. The mass spectra of DHP at the same energies were simulated using on-the-fly semi-classical molecular dynamics (MD) within the framework of the QCxMS formalism. The MD settings were suitably adjusted until a good agreement with the experimental mass spectra intensities was achieved, thus enabling a reliable assignment of cations and unraveling the plausible fragmentation channels. Based on the measurement of the absolute total ionization cross section of DHP (18.1 ± 0.9) × 10-16cm2 at 100eV energy, the absolute total and partial ionization cross sections of DHP were determined in the 5-140eV electron energy. Moreover, a machine learning algorithm that was trained with measured cross sections from 25 different molecules was used to predict the total ionization cross section for DHP. Comparison of the machine learning simulation with the measured data showed acceptable agreement, similar to that achieved in past predictions of the algorithm.

Structural characterization of sphingomyelins from tissue using electron-induced dissociation.

Sphingomyelins (SMs) and resulting metabolic products serve important functional and cell signaling roles and can act as potential biomarkers and therapeutic targets in many pathological disorders. SMs each contain a sphingoid base, an amide-linked fatty acyl chain, and a phosphocholine headgroup. Despite these simple building blocks, variations and modifications of both the sphingoid base and the fatty acyl chain result in a diverse array of structurally complicated SM compounds. Conventional tandem mass spectrometry (MS/MS) using the collision-induced dissociation (CID) method only provides limited structural information, necessitating other tools to unravel the structural complexity of these lipids. We utilize electron-induced dissociation (EID) and sequential CID/EID approaches to elucidate detailed structural features of SMs. Integrating the CID/EID method into an imaging MS workflow enables accurate identification of SMs directly from kidney tissue. The application of EID enables identification of SMs at the molecular species level, identifying the sphingosine base and the amide-linked fatty acyl chains. Furthermore, removal of the phosphocholine headgroup via CID followed by sequential EID in an MS3 analysis (CID/EID) enhances the structural information obtained. CID/EID provides diagnostic fragmentation patterns revealing the hydroxylation site and double bond position in both the sphingosine base and amide-linked fatty acyl chains. Detailed structural information of SMs from synthetic standards and biological tissue samples is obtained using an alternative electron-based dissociation method. Accurate characterization of SMs promises to better inform studies of tissue biochemistry, lipid metabolism, and molecular pathology.

Investigating electron-induced dissociation dynamics in the organometallic precursor Fe(CO)5: a nonadiabatic molecular dynamics approach

This research employs excited states molecular dynamics simulations to explore the electron-induced dissociation behavior of Fe(CO)5 molecules, with the specific focus on electronic excitation. The study initiates with the detailed analysis of the molecule’s stable ground state structure. Subsequent simulations reveal distinctive dissociation patterns in various bonds, particularly noting the rapid dissociation of bonds between Fe and C1, Fe and C2, while those with Fe and C3 oscillate without complete dissociation. Emphasizing the influence of the transition from the highest occupied molecular orbital to the lowest unoccupied molecular orbital on reactivity, the investigation sheds light on the charge transfer phenomenon during dissociation through Bader analysis. Insights into transitions between excited and ground states are derived from the time evolution of the Kohn–Sham orbital. This study significantly contributes to understanding intricate dissociation mechanisms under electronic excitation, especially in molecules like Fe(CO)5 characterized by complex chemical bonds. Beyond theoretical exploration, the research holds practical significance for applications in nanomaterials, such as focused electron beam-induced deposition and the fabrication of nanoscale structures, enriching our comprehension of electronic-excitation-induced dissociation and advancing both theoretical understanding and practical applications in this field.

Nonadiabatic Molecular Dynamics of Water Cluster Dissociation by Vacuum Ultraviolet Absorption or Electron Impact Excitation.

After five decades of investigation since the 1970s, the nature of photon-induced or electron-induced water dissociation is still largely studied only in the gas phase, with a notable absence of dynamics studies of water clusters and bulk water. We study the problem with density functional theory and the nonadiabatic fewest switches surface hopping technique considering both singlet and triplet excited states to study the dissociation of water clusters leading mainly to OH + H. For clusters of 40 water molecules, the mean dissociation time was found to be <10 fs, and the threshold energy was ∼6 eV. Dissociation is almost exclusively associated with the cluster surface due to the lower energy of surface water excited states relative to the bulk. Recombination plays a major role in vacuum ultraviolet dissociation. O + H2 is found as a minor product in the dissociation and is mostly produced in "roaming" trajectories.

Abortive reaction leads to selective adsorbate rotation.

Electron-induced dissociation of a fluorocarbon adsorbate CF3 (ad) at 4.6 K is shown by Scanning Tunnelling Microscopy (STM) to form directed energetic F-atom 'projectiles' on Cu(110). The outcome of a collision between these directed projectiles and stationary co-adsorbed allyl 'target' molecules was found through STM to give rotational excitation of the target allyl, clockwise or anti-clockwise, depending on the chosen collision geometry. Molecular dynamics computation linked the collisional excitation of the allyl target to an 'abortive chemical reaction', in which the approach of the F-projectile stretched an H-C bond lifting the allyl above the surface, facilitating isomerization from 'Across' to 'Along' a Cu row.

A combined gas-phase dissociative ionization, dissociative electron attachment and deposition study on the potential FEBID precursor [Au(CH3)2Cl]2

Motivated by the potential of focused-electron-beam-induced deposition (FEBID) in the fabrication of functional gold nanostructures for application in plasmonic and detector technology, we conducted a comprehensive study on [Au(CH3)2Cl]2 as a potential precursor for such depositions. Fundamental electron-induced dissociation processes were studied under single collision conditions, and the composition and morphology of FEBID deposits fabricated in an ultrahigh-vacuum (UHV) chamber were explored on different surfaces and at varied beam currents. In the gas phase, dissociative ionization was found to lead to significant carbon loss from this precursor, and about 50% of the chlorine was on average removed per dissociative ionization incident. On the other hand, in dissociative electron attachment, no chlorine was removed from the parent molecule. Contrary to these observations, FEBID in the UHV setup was found to yield a quantitative loss and desorption of the chlorine from the deposits, an effect that we attribute to electron-induced secondary and tertiary reactions in the deposition process. We find this precursor to be stable at ambient conditions and to have sufficient vapor pressure to be suitable for use in HV instruments. More importantly, in the UHV setup, FEBID with [Au(CH3)2Cl]2 yielded deposits with high gold content, ranging from 45 to 61 atom % depending on the beam current and on the cleanliness of the substrates surface.

Imaging and Structural Characterization of Phosphatidylcholine Isomers from Rat Brain Tissue Using Sequential Collision-Induced Dissociation/Electron-Induced Dissociation.

The chemical complexity of biological tissues creates challenges in the analysis of lipids via imaging mass spectrometry. The presence of isobaric and isomeric compounds introduces chemical noise that makes it difficult to unambiguously identify and accurately map the spatial distributions of these compounds. Electron-induced dissociation (EID) has previously been shown to profile phosphatidylcholine (PCs) sn-isomers directly from rat brain tissue in matrix-assisted laser desorption/ionization (MALDI) imaging mass spectrometry. However, the acquisition of true pixel-by-pixel images, as opposed to regional profiling measurements, using EID is difficult due to low fragmentation efficiency and precursor ion signal dilution into multiple fragment ion channels, resulting in low sensitivity. In this work, we have developed a sequential collision-induced dissociation (CID)/EID method to visualize the distribution of sn-isomers in MALDI imaging mass spectrometry experiments. Briefly, CID is performed on sodium-adducted PCs, which results in facile loss of the phosphocholine headgroup. This ion is then subjected to an EID analysis. Since the lipid headgroup is removed prior to EID, a major fragmentation pathway common to EID ion activation is eliminated, resulting in a more sensitive analysis. This sequential CID/EID workflow generates sn-specific fragment ions allowing for the assignment of the sn-positions. Carbon-carbon double-bond (C═C) positions are also localized along the fatty acyl tails by the presence of a 2 Da shift pattern in the fragment ions arising from carbon-carbon bond cleavages. Moreover, the integration of the CID/EID method into MALDI imaging mass spectrometry enables the mapping of the absolute and relative distribution of sn-isomers at every pixel. The localized relative abundances of sn-isomers vary throughout brain substructures and likely reflect different biological functions and metabolism.

Breakdown of dipole Born approximation and the role of Rydberg’s predissociation for the electron-induced ion-pair dissociation to oxygen in the presence of background gases

We study the electron-induced ion-pair dissociation to gas-phase oxygen molecules using a state-of-the-art velocity-map ion-imaging technique. The analysis is entirely based on the conical time-gated wedge-shaped velocity slice images of O-/O2 nascent anionic fragments, and the resulting observations are in favor of Van Brunt et al.'s report [R. J. Van Brunt and L. J. Kieffer, J. Chem. Phys. 60, 3057 (1974)]. A new image reconstruction method, Jacobian over parallel slicing, is introduced to overcome the drawback of ion exaggeration in determining the kinetic energy distribution from the time-gated parallel slicing technique, which offers an alternative approach to the wedge slicing method. Most importantly, the role of the quintet-heavy Rydberg state has been drawn out to the complex ion-pair formalism. The extracted kinetic energy and angular distributions from the wedge slice images reveal a high momentum transfer during the ion-pair dissociation process, which could be the finest rationale to observe the breakdown of dipole Born approximation driven by multipole moment associated with the incident electron beam. Three distinct dissociative momentum bands have been precisely identified for O- dissociation. However, radiationless Rydberg's predissociation continuum (≥15%) has become an inherent character of electron-induced ion-pair dissociation, which could be dealt with using the beyond Born-Oppenheimer treatment. The incoherent sum of Σ and Π symmetric-associated ion-pair final states has been precisely identified by modeling the angular distribution of O-/O2 for each of the kinetic energy bands. A negligibly small amount of forward-backward asymmetry is observed in the angular distribution of O-/O2, which might be explained by the dissociative state-specific quantum coherence mechanism as reported [Krishnakumar et al., Nat. Phys. 14, 149 (2018); Kumar et al., arXiv:2206.15024 (2022)] by Prabhudesai et al.

Probing radical versus proton migration in the aniline cation with IRMPD spectroscopy

Intramolecular radical and proton migration in the gas phase are important processes driving the dissociation reactions underlying common tandem mass spectrometry processes, such as collision-induced and electron-induced dissociation reactions (CID and ExD). Mechanistic insights in these processes requires experiments that probe the molecular structures of ions along the reaction pathways, usually combined with quantum-chemical calculations. The combination of ion trap mass spectrometry with IR laser spectroscopy, pioneered among others by Dieter Gerlich, provides a particularly effective method to explore details of the ion structures. In this work, we employ infrared multiple-photon dissociation (IRMPD) spectroscopy and density functional theory (DFT) calculations to probe the reactant and product ion structures of a homolytic bond cleavage reaction. First, we employ IRMPD spectroscopy to establish that protonation of the 4-bromoaniline precursor occurs on the amine moiety and then that C-Br homolytic cleavage produces the π-radical cation of aniline. Transition-state calculations are performed to compare the various pathways that connect reactant and product ions, including both proton and radical transfer mechanisms.

Excitation and fragmentation of the dielectric gas C4F7N: Electrons vs photons.

C4F7N is a promising candidate for the replacement of sulfur hexafluoride as an insulating medium, and it is important to understand the chemical changes initiated in the molecule by collision with free electrons, specifically the formation of neutral fragments. The first step of neutral fragmentation is electronic excitation, yet neither the absorption spectrum in the vacuum ultraviolet (VUV) region nor the electron energy loss spectrum have previously been reported. Here, we experimentally probed the excited states by VUV photoabsorption spectroscopy and electron energy loss spectroscopy (EELS). We found that the distribution of states populated upon electron impact with low-energy electrons is significantly different from that following photoabsorption. This difference was confirmed and interpreted with ab initio modeling of both VUV and EELS spectra. We propose here a new computational protocol for the simulation of EELS spectra combining the Born approximation with approximate forms of correlated wave functions, which allows us to calculate the (usually very expensive) scattering cross sections at a cost similar to the calculation of oscillator strengths. Finally, we perform semi-classical non-adiabatic dynamics simulations to investigate the possible neutral fragments of the molecule formed through electron-induced neutral dissociation. We show that the product distribution is highly non-statistical.

Low-energy electron interaction with 2-(trifluoromethyl)acrylic acid, a potential component for EUVL resist material.

Motivated by the current introduction of extreme ultraviolet lithography (EUVL) into chip manufacturing processes, and thus the transition to electron-induced chemistry within the respective resist materials, we have studied low energy electron-induced fragmentation of 2-(trifluoromethyl)acrylic acid (TFMAA). This compound is chosen as a potential resist component, whereby fluorination enhances the EUV adsorption and may at the same time promote electron-induced dissociation. Dissociative ionization and dissociative electron attachment are studied, and to aid the interpretation of the observed fragmentation channels, the respective threshold values are calculated at the DFT and coupled cluster level of theory. Not surprisingly, we find significantly more extensive fragmentation in DI than in DEA and in fact, the only significant DEA fragmentation channel is the cleavage of HF from the parent molecule upon electron attachment. Rearrangement and new bond formation are substantial in DI and are, in fact, similar to DEA, mainly associated with HF formation. The observed fragmentation reactions are discussed in relation to the underlying reactions and potential implications for the suitability of TFMAA as a component of EUVL resist materials.

Structural elucidation and relative quantification of sodium- and potassium-cationized phosphatidylcholine regioisomers directly from tissue using electron induced dissociation

Comprehensive structural characterization of phosphatidylcholines (PCs) is essential to understanding their biological functions and roles in metabolism. Electron induced dissociation (EID) of protonated PCs directly generated from biological tissues has previously been shown to provide in-depth structural information on the lipid headgroup, regiosiomerism of fatty acyl tails and double bond positions. Although phosphatidylcholine ions formed via alkali metal cationization (i.e., [M + Na]+ and [M + K]+) are commonly generated during matrix-assisted laser desorption/ionization (MALDI) imaging mass spectrometry experiments, the gas-phase ion chemistry behavior of EID on sodium- and potassium-cationized phosphatidylcholine ion types has not been studied for ions generated directly from tissue. Herein, we demonstrate EID on [M + Na]+ and [M + K]+ ion types in a MALDI imaging mass spectrometry workflow for lipid structural characterization. Briefly, near-complete structural information can be obtained upon EID of sodium- and potassium-cationized PCs, including diagnostic fragmentation of the lipid headgroup as well as identification of fatty acyl chain positions and double bond position. EID of cationized lipids generates sn-specific glycerol backbone cleavages as well as a favorable combined loss of sn-2 fatty acid with choline over sn-1, allowing for facile differentiation and relative quantification of PC regioisomers. Moreover, relative quantification of sn-positional isomers from biological tissue reveals that the relative percentages of sodium- and potassium-cationized sn-positional isomers varies significantly in different regions of rat brain tissue.

Differentiation of Dihydroxylated Vitamin D3 Isomers Using Tandem Mass Spectrometry.

Vitamin D compounds are a group of secosteroids derived from cholesterol that are vital for maintaining bone health in humans. Recent studies have shown extraskeletal effects of vitamin D, involving vitamin D metabolites such as the dihydroxylated vitamin D3 compounds 1,25-dihydroxyvitamin D3 and 24,25-dihydroxyvitamin D3. Differentiation and characterization of these isomers by mass spectrometry can be challenging due to the zero-mass difference and minor structural differences between them. The isomers usually require separation by liquid chromatography (LC) prior to mass spectrometry, which adds extra complexity to the analysis. Herein, we investigated and revisited the use of fragmentation methods such as collisional induced dissociation (CID), infrared multiphoton dissociation (IRMPD), electron induced dissociation (EID), and ultraviolet photodissociation (UVPD), available on a 12T Fourier transform ion cyclotron resonance mass spectrometer (FT-ICR MS) to generate characteristic fragments for the dihydroxylated vitamin D3 isomers that can be used to distinguish between them. Isomer-specific fragments were observed for the 1,25-dihydroxyvitamin D3, which were clearly absent in the 24,25-dihydroxyvitamin D3 MS/MS spectra using all fragmentation methods mentioned above. The fragments generated due to cleavage of the C-6/C-7 bond in the 1,25-dihydroxyvitamin D3 compound demonstrate that the fragile OH groups were retained during fragmentation, thus enabling differentiation between the two dihydroxylated vitamin D3 isomers without the need for prior chromatographic separation or derivatization.

Mass Spectrometry Imaging Techniques Enabling Visualization of Lipid Isomers in Biological Tissues

This Feature focuses on a review of recent developments in mass spectrometry imaging (MSI) of lipid isomers in biological tissues. The tandem MS techniques utilizing online and offline chemical derivatization procedures, ion activation techniques such as ozone-induced dissociation (OzID), ultraviolet photodissociation (UVPD), or electron-induced dissociation (EID), and other techniques such as coupling of ion mobility with MSI are discussed. The importance of resolving lipid isomers in diseases is highlighted.

Construction of graphitic-N-rich TiO2-N-C interfaces via dye dissociation and reassembly for efficient oxygen evolution reaction

• Three kinds of Dye waste are reused in the preparation of N-doped carbon supported TiO 2 catalysts. • The ultrasmall size of TiO 2 are in-situ synthesized and loaded. • The abundant TiO 2 -N-C interfaces with different types of N-doping are achieved. • The TiO 2 @N-doped carbon catalyst prepared by methyl orange shows excellent OER activity and stability. • DFT calculation reveals the graphitic-N accelerated reaction mechanism. Environmental pollution and the energy crisis are two major threats to human beings. The textile printing and dyeing industry use synthetic dyes to color its products producing lots of wastewater. In this work, ultrasmall size of TiO 2 supported on N-doped carbon (TiO 2 @NC) have been prepared via electron-induced dye dissociation and reassembly method. The dye precursors of methyl orange (MO), methylene blue (MB), and rhodamine B (RB) provide N and C sources. TiO 2 are sputtered and loaded onto carbon simultaneously during the one-step synthesis process. TiO 2 @NC-MO with the highest proportion of graphitic-N exhibits the best OER performance with a low overpotential (325 mV at 10 mA cm −2 ) and excellent durability (over 50,000 s at 10 mA cm −2 ) in alkaline solution. A two-electrode electrolyzer is assembled by using TiO 2 @NC-MO as anode and cathode in 1.0 M KOH media for the overall water splitting, which delivers an initial cell voltage of only 1.71 V at 10 mA cm −2 , as well as long-term stability up to 50,000 s. Density functional theory calculations verification that the TiO 2 -N-C interface with high radio of graphitic-N leads to the optimal catalytic activity. This study sheds light on the recycling and reuse of dye wastewater for the fabrication of highly efficient electrocatalysts with controllable N-doping structures and metal oxide size via a novel eco-friendly approach.

Electron-Stimulated Formation and Release of Molecular Hydrogen and Oxygen from Boehmite Nanoplatelet Films

The production and release of H2 and O2 during and after electron (100–1000 eV) irradiation of boehmite nanoplatelet films was studied. H2 and O2 produced during irradiation likely correspond to electron-induced dissociation of the hydroxyls primarily in the terminal surface layers of the boehmite followed by the H· + H· → H2(g) and O + O → O2(g) combinative desorption reactions as well as the abstraction reactions H· + >OH– → H2(g) + >O·̅. Postirradiation temperature-programmed desorption shows a temperature-dependent release of H2 but no additional release of O2. This process likely involves diffusion and recombination of H· atoms initially trapped between the γ-AlOOH planes followed by recombination at edge and surface sites. H2 production upon thermal-annealing-irradiated material shows no dependence on incident electron flux, suggesting the precursor species (H·) trapped within the bulk are long-lived.

Electron-induced dissociation dynamics studied using covariance-map imaging.

Recently, covariance analysis has found significant use in the field of chemical reaction dynamics. When coupled with data from product time-of-flight mass spectrometry and/or multi-mass velocity-map imaging, it allows us to uncover correlations between two or more ions formed from the same parent molecule. While the approach has parallels with coincidence measurements, covariance analysis allows experiments to be performed at much higher count rates than traditional coincidence methods. We report results from electron-molecule crossed-beam experiments, in which covariance analysis is used to elucidate the dissociation dynamics of multiply-charged ions formed by electron ionisation over the energy range from 50 to 300 eV. The approach is able to isolate signal contributions from multiply charged ions even against a very large 'background' of signal arising from dissociation of singly-charged parent ions. Covariance between the product time-of-flight spectra identifies pairs of fragments arising from the same parent ions, while covariances between the velocity-map images ('recoil-frame covariances') reveal the relative velocity distributions of the ion pairs. We show that recoil-frame covariance analysis can be used to distinguish between multiple plausible dissociation mechanisms, including multi-step processes, and that the approach becomes particularly powerful when investigating the fragmentation dynamics of larger molecules with a higher number of possible fragmentation pathways.

Long-range migration of H-atoms from electron-induced dissociation of HS on Si(111)

The electron-induced dissociation of chemisorbed HS to give recoiling H-atoms was investigated on a Si(111)-7 × 7 surface at 270 K by scanning tunnelling microscopy and modelled by density functional theory. Two different H-atom migratory pathways were identified: ‘short-range’ (S‐R; 37%) and ‘long-range’ (L‐R; 42%). In S‐R reaction the H-atom recoiled by only 4 Å whereas in L‐R the average H-recoil distance was 17 Å extending up to 72 Å. Chemisorbed H-atoms were not detected in the remaining 22% of dissociative events. Excitation involved three successive events, e− + HS. Molecular dynamics calculations of S‐R and L‐R recoil of H-atoms were performed using a model based on electron-induced H ⋅ S repulsion. In S‐R the repulsion gave the H-atom sufficient energy to dissociate HS, but not enough to result in capture of the H-atom by the adjacent rest Si-atom. In L‐R a higher translational energy of the recoiling H, above 0.2 eV, caused the H-atom to ‘bounce’ off surface atoms and migrate L‐R. The finding that H-atom L‐R migration followed the ballistics and ‘bounce’ mechanism is indicative of the generality of this mode of L‐R recoil.

Combining Ultraviolet Photodissociation and Two-Dimensional Mass Spectrometry: A Contemporary Approach for Characterizing Singly Charged Agrochemicals.

Ultraviolet photodissociation (UVPD) has been shown to produce extensive structurally informative data for a variety of chemically diverse compounds. Herein, we demonstrate the performance of the 193 nm UVPD fragmentation technique on structural/moiety characterization of 14 singly charged agrochemicals. Two-dimensional mass spectrometry (2DMS) using infrared multiphoton dissociation (IRMPD) and electron-induced dissociation (EID) have previously been applied to a select range of singly charged pesticides. The ≥80% moiety coverage achieved for the majority of the species by the UVPD and 2D-UVPD methods was on par with and, in some cases, superior to the data obtained by other fragmentation techniques in previous studies, demonstrating that UVPD is viable for these types of species. A three-dimensional (3D) peak picking method was implemented to extract the data from the 2DMS spectrum, overcoming the limitations of the line extraction method used in previous studies, successfully separating precursor specific fragments with milli-Dalton accuracy. Whole spectrum internal calibration combined with 3D peak picking obtained sub-part-per-million (ppm) to part-per-billion (ppb) mass accuracies across the entire 2DMS spectrum.

Enhancement of hydrogen peroxide production from an atmospheric pressure argon plasma jet and implications to the antibacterial activity of plasma activated water

We explore how to configure an argon atmospheric-pressure plasma jet for enhancing its production of hydrogen peroxide (H2O2) in deionised water (DIW). The plasma jet consists of a quartz tube of 1.5 mm inner diameter and 3 mm outer diameter, with an upstream internal needle electrode (within the tube) and a downstream external cylindrical electrode (surrounding the tube). The plasma is operated by purging argon through the glass tube and applying a sinusoidal AC voltage to the internal needle electrode at 10 kV (peak–peak) with a frequency of 23.5 kHz. We study how the following operational parameters influence the production rate of H2O2 in water: tube length, inter-electrode separation distance, distance of the ground electrode from the tube orifice, distance between tube orifice and the DIW, argon flow rate and treatment time. By examining the electrical and optical properties of the plasma jet, we determine how the above operational parameters influence the major plasma processes that promote H2O2 generation through electron-induced dissociation reactions and UV photolysis within the plasma core and in the plasma afterglow; but with a caveat being that these processes are highly dependent on the water vapour content from the argon gas supply and ambient environment. We then demonstrate how the synergistic action between H2O2 and other plasma generated molecules at a plasma induced low pH in the DIW is highly effective at decontaminating common wound pathogens Gram-positive Staphylococus aureus and Gram-negative Pseudomonas aeruginosa. The information presented in this study is relevant in the design of medical plasma devices where production of plasma reactive species such as H2O2 at physiologically useful concentrations is needed to help realise the full clinical potential of the technology.