Recombination Of Electron-hole Pairs Research Articles

Boosting photocatalytic activity of β-PbO nanoparticles through metal doping

The current work focuses on the fabrication of pristine and metals (Co, Cu, Ni, Li, and Sn) doped β-PbO phase nanoparticles by cost-effective precipitation method. The properties of the produced nanoparticles were investigated using a variety of characterization techniques. The produced compound was a highly pure β-PbO phase, according to the XRD data. From the UV–vis DRS the obtained bandgap of pristine β-PbO, Co, Cu, Ni, Li, and Sn doped β-PbO was 2.68 eV, 1.88 eV, 2.01 eV, 2.65 eV, 2.64 eV, and 2.70 eV, respectively. The doped samples with the lowest photoluminescence (PL) intensities show the reduced photogenerated electron–hole pair recombination, which increased the photocatalytic activity of β-PbO nanoparticles. The study of the surface morphology by SEM reveals the irregular distribution of the particles. In both pristine and doped nanoparticles, EDX verifies the existence of the expected elements. In comparison to pristine β-PbO, all doped β-PbO nanoparticles have enhanced photocatalytic activity for the degradation of methylene blue (MB) dye under the irradiation of visible light. Among the doped nanoparticles, Cu and Co-doped β-PbO demonstrated particularly high performance. After 80 min of irradiation, Cu and Co-doped β-PbO showed 99.45% and 99.39% degradation rates of MB dye, compared to only 75.13% for pure β-PbO. Hence, the photocatalytic activity of pure β-PbO is boosted through metals doping due to bandgap narrowing, generation of impurity states, increased specific surface area, higher carrier concentration, reduced carriers recombination, the action of dopant ions, and microstructural changes.

Two-stage hydrothermal process driven visible light sensitive photocatalytic m-ZnWO4/m-WO3 heterojunction composite materials

The current study reports on the facile two-step hydrothermal synthesis of heterojunction m-ZnWO4/m-WO3 composite powders for visible light sensitive photocatalytic applications. The ZnWO4 particles start crystallizing on the surface of the WO3 powder in the second stage of the reaction in a basic medium. The phases of the composite powders were confirmed using x-ray diffraction analysis. The monoclinic cubic shaped WO3 and rod shaped ZnWO4 morphologies were disclosed from the field emission scanning electron microscope images. Strong interfacial adhesion between ZnWO4 and WO3 was unveiled from the high-resolution transmission electron microscopy study. The optimized composite 5ZW exhibits a calculated bandgap of 2.58 eV, positioning it within the visible light wavelength range (λ = 400–700 nm). Furthermore, there is a notable enhancement in the average lifetime of the electron–hole pair recombination rate, which is extended to 30.3 ns. The composite 5ZW demonstrated 96% methylene blue dye degradation efficiency within 420 min under visible light irradiation at pH 12. Due to the optimal phase fraction and strong interfacial adhesion between ZnWO4 and WO3, the heterojunction scheme seemed to be highly efficient in the 5ZW composite. Hence, it is believed that a two-step hydrothermal method can be a proficient route to prepare heterojunction composites m-ZnWO4/m-WO3 in alkali conditions with visible light active photodegradation efficiency.

Adjustable n→π* electronic transition by sulfonated benzene functionalized g-C3N4 for enhanced photocatalytic H2 generation

The photocatalytic efficiency of graphitic carbon nitride (g-C3N4) in hydrogen production is primarily hindered by its poor absorption of visible light, rapid recombination of electron-hole pairs, and the absence of hydroxyl radical formation. Herein, a novel g-C3N4 nanosheets functionalized with sulfonic acid groups were effectively produced through thermal polymerization of melamine and 2, 4-diamino-6-phenyl-1, 3, 5-triazine (DPT), followed by sulfonation treatment. The introduction of the phenyl group brings about alterations to the initial symmetrical arrangement of g-C3N4, leading to the disruption of certain hydrogen bonds. This, in turn, facilitates the movement of electrons from the n to π* orbitals, resulting in enhanced light absorption and improved efficiency in charge separation. Moreover, it induces modifications to the band structure and amplifies the production of hydroxyl radicals. Additionally, the introduction of sulfonic acid enhances the water affinity and the ability of dispersing graphitic carbon nitride in water. The optimized sulfonated benzene-substituted g-C3N4 (1000-BCN-SO3H) with a melamine to DPT ratio of 4:1 exhibits a maximum hydrogen production rate of 6.52 mmol·h−1·g−1 under simulated sunlight irradiation with good cycling stability, which is 3.93 times higher than that of g-C3N4 nanosheets. This research offers a promising opportunity for a novel approach in advancing carbon nitride materials for effective photocatalytic processes.

Polyoxometalates electron acceptor-intercalated In2O3@SnO2 nanofibers for chemiresistive ethanol gas sensors

Polyoxometalates (POMs), as a kind of electron acceptors, comes into sight in gas sensing field. Here, we in situ construct a group of polyoxomethoate/semiconductor one-dimensional tandem heterojunction materials using convenient one-step coaxial electrospinning method. A polyoxometalates electron acceptor layer was intercalated into In2O3@SnO2 nanofibers (NFs), forming In2O3@PW12@SnO2 coaxial core-middle-shell NFs. Gas sensing performances of the one-dimensional In2O3@PW12@SnO2 tandem heterojunctions were investigated for the first time. The fabricated NFs exhibited excellent detection performances for ethanol gas. The optimal sensitivity response to 100 ppm ethanol can reach 22.6, which is about 4 times that of POMs-free samples. Other gas sensing parameters were also comprehensively studied. The significant enhancement can be attributed to the addition of appropriate amount of PW12 electron acceptor which accelerate electrons transfer and reduce the recombination of electron-hole pairs. This work provides a novel strategy for developing high performance gas sensors by constructing tandem heterojunctions as well as introducing POMs electron acceptor, and offers new insight into the development of POMs-based gas sensors.

Facile construction of MoS2 decorated CdS hybrid heterojunction with enhanced hydrogen generation performance

Promoting the charge separation to improve photocatalytic performance of semiconductor photocatalysts is very important in the field of artificial photosynthesis. Here, a novel MoS2/CdS 2D–2D ultrathin nanosheet heterostructure was fabricated via a one-pot solvothermal route. The obtained 2D–2D MoS2/CdS nanojunction has not only provided large contact areas, but also shortened the charge transport distance, resulting in significantly enhanced photocatalytic H2 evolution property. The composites that were synthesized were examined using X-ray diffraction (XRD), Field emission scanning electron microscope (FESEM), Transmission electron microscope (TEM), UV-vis diffuse reflectance spectra (DRS), Photoluminescence (PL) and X-ray photoelectron spectra (XPS) analysis. By optimizing the 2D MoS2 amounts in the heterojunction, the 5 wt.% 2D/2D MoS2/CdS heterojunction displayed the maximal photocatalytic H2 evolution rate of 4449 μmolh−1g−1 under visible light irradiation in the presence of lactic acid as the sacrificial reagent, which was 6 times higher than that of pristine 2D CdS. Based on the photoelectrochemical and photoluminescence spectra tests, it could be deduced that the charge separation and transfer of 2D/2D MoS2/CdS heterojunction was tremendously improved, and the recombination of photoinduced electron-hole pairs was effectively impeded. Moreover, the 2D MoS2 was used as a cocatalyst to provide the abundant active sites and lower the overpotential for H2 generation reaction. The current work would offer an insight to fabricate the 2D/2D heterojunction photocatalysts for splitting H2O into H2.

Combating infections from drug-resistant bacteria: Unleashing synergistic broad-spectrum antibacterial power with high-entropy MXene/CDs

The growing resistance of bacteria to antibiotics has posed challenges in treating associated bacterial infections, while the development of multi-model antibacterial strategies could efficient sterilization to prevent drug resistance. High-entropy MXene has emerged as a promising candidate for antibacterial synergy with inherent photothermal and photodynamic properties. Herein, a high-entropy nanomaterial of MXene/CDs was synthesized to amplify oxidative stress under near-infrared laser irradiation. Well-exfoliated MXene nanosheets have proven to show an excellent photothermal effect for sterilization. The incorporation of CDs could provide photo-generated electrons for MXene nanosheets to generate ROS, meanwhile reducing the recombination of electron-hole pairs to further accelerate the generation of photo-generated electrons. The MXene/CDs material demonstrates outstanding synergistic photothermal and photodynamic effects, possesses excellent biocompatibility and successfully eliminates drug-resistant bacteria as well as inhibits biofilm formation. While attaining a remarkable killing efficiency of up to 99.99% against drug-resistant Escherichia coli and Staphylococcus aureus, it also demonstrates outstanding antibacterial effects against four additional bacterial strains. This work not only establishes a synthesis precedent for preparing high-entropy MXene materials with CDs but also provides a potential approach for addressing the issue of drug-resistant bacterial infections.

Inhibition photooxidation of pyrite under illumination via altering photogenerated carrier migration pathways: Role of DTC-TETA surface passivation

The oxidation of pyrite is the main cause of acidic mine drainage (AMD), which is a very serious environmental problem in numerous mining areas around the world. Previous studies have shown that passivation agents create a hydrophobic film on the surface of pyrite, effectively isolating oxygen and water. However, the presence of abundant sulfide minerals in tailings ponds may exacerbate AMD when exposed to solar radiation, due to the semiconductor properties of pyrite. It remains uncertain whether the current surface passivation coating can effectively prevent the oxidation of pyrite under light conditions. This paper is the first to investigate the passivation effect as well as the mechanism of surface passivation coating on pyrite under illumination from the perspective of materials science. The results demonstrated that the triethylenetetramine-bisdithiocarbamate (DTC-TETA) passivation coating on pyrite almost completely suppressed the photooxidation of pyrite under illumination by changing the migration path of photogenerated charge carriers. The formation of NC(S)2-Fe chelating groups provides atomic-level interface channels for DTC-TETA to transfer electrons to pyrite and creates a favorable reduction environment for pyrite. Besides, DTC-TETA coating greatly improves the electron-hole pairs recombination efficiency of pyrite, which significantly inhibits the photogenerated electron reduction of oxygen to generate reactive oxygen species (ROS). Moreover, DTC-TETA coating captures the photogenerated holes, avoiding direct oxidation of pyrite by holes. Density functional theory (DFT) calculations revealed that the DTC-TETA coating increases the adsorption energy barrier for oxygen and water. The results extend the existing knowledge on passivation mechanisms on pyrite and hold significant implications for the future screening, evaluation, and practical application of surface passivating agents.

Donor-acceptor type conjugated porous polymers based on benzotrithiophen and triazine derivatives: Effect of linkage unit on photocatalytic water splitting

Donor-acceptor conjugated polymers have received significant attention as the most promising photocatalysts for efficient photocatalytic hydrogen production (PHP). Nonetheless, achieving high photocatalytic PHP performance relies on molecular framework design and the judicious selection of different structural units. Herein, benzotrithiophene (BTT) and triazine derivatives were used as the basic units of organic polymers, and two conjugated porous polymers (CPPs) named as CP1 and CP2 were successfully synthesized by Stille coupling reaction. Compared with benzene as the linkage unit of triazine, it is evident that the incorporation of the thiophene unit in CP2 broadens its light response range, and promotes the generation of electrons/holes induced by light. Density functional theory (DFT) calculations and femtosecond transient absorption(fs-TA) spectroscopy reveal that CP2 effectively inhibits the photogenerated electron-hole pair recombination and promotes carrier transport. Remarkably, CP2 with Pt co-catalyst exhibited a notably superior PHP performance compared with that of CP1 polymer, which achieved an impressive hydrogen evolution rate (HER) of 21702.4 μmol/g/h, surpassing CP1 by approximately 3.7 times. This work provides a new tactic for enhancing the intrinsic PHP activity and reveals the underlying mechanism for the enhanced photocatalytic activity by regulating the different structural units of the donor-acceptor conjugated polymers.

PtCu Alloy-Modified Triptycene-Based Polymer with Charge Separation for Photocatalytic Hydrogen Evolution from Water/Seawater.

Direct photocatalytic hydrogen from earth-abundant seawater is a great potential way to achieve sustainable and clean energy, yet unsatisfactory decomposition and rapid electron-hole pair recombination of catalysts hinder the solar-driven H2 conversion efficiency. Herein, we designed a series of PtCu alloy nanoparticle-modified porous triptycene-based polymers (PtxCu1-TCP) to construct the heterostructure for highly efficient hydrogen generation from photocatalytic water/seawater splitting. Characterizations displayed that TCP with an ultrahigh surface area can confine the agglomeration of PtCu alloy; meanwhile, the PtCu alloy can facilitate the rapid electron transfer from TCP. In addition, TCP with a stable covalent bond structure can resist the corrosion of seawater. Benefiting from these two advantages, Pt7Cu1-TCP showed a remarkably enhanced photocatalytic performance with a maximum H2 evolution rate of 3255 μmol g-1 h-1 in natural seawater with triethanolamine, which is 2.69, 116.25, and 1.08 times that of Pt-TCP, Cu-TCP, and optimal catalyst in pure water, respectively. This study provides an idea for the development of a novel catalytic system for hydrogen production from solar-driven water/seawater splitting.

Preparation and Properties of Cotton Fabric Photocatalyzed by Ag-Doped Madder-Sensitized TiO2

In this study silver nanoparticles (NP) were grown in-situ on the surface of madder-sensitized TiO2 by an in-situ reduction method using silver nitrate as a silver source and a honeysuckle extract as a reducing agent. Silver doped madder-sensitized TiO2 nanoparticles were then prepared, supported on the surface of cotton fabrics to prepare photocatalytic cotton fabrics with high-efficiency self-cleaning properties and excellent antibacterial properties. transmission electron microscopy (TEM), scanning electron microscopy (SEM), X-ray diffraction (XRD), and X-ray photoelectron spectroscopy (XPS) analyses showed that elemental Ag NPs were deposited on the surface of the madder-sensitized TiO2, and that Ag-doped madder-sensitized TiO2 NPs were successfully loaded on the cotton fabric surface. The results of UV-Visible diffuse reflectance spectroscopy (UV-Vis-DRS) and Photoluminescence Spectroscopy (PL) showed that Ag-doping could further reduce the band gap of madder-sensitized TiO2 than pure TiO2. The absorption of light in the photocatalytic system was increased, and the recombination of electron-hole pairs was effectively inhibited. Compared with madder-sensitized TiO2 photocatalyzed cotton fabric, the degradation rate of nano-Ag-doped madder-sensitized TiO2 photocatalytic cotton fabric for methylene blue (MB) was increased by 10.66% within 2 h, and the degradation process was in line with the first-order reaction kinetic model. After 5 times of washing, the photocatalytic cotton fabric still had excellent photocatalytic performance. Its antibacterial rates against Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus) reached 100 and 99.99%, respectively. In addition, it had good wrinkle resistance and UV protection properties, but the cross-linking modification reduced the breaking strength by about 14%.

Efficient degradation of naproxen in wastewater using Ag-deposited ZnO nanoparticles anchored on a house-of-cards-like MFI-type zeolite: Preparation and physicochemical evaluations of the photocatalyst

We utilized Pr6-diquat-5 as an organic structure-directing agent (OSDA) to synthesize hierarchically intergrown ZSM-5 (HI-ZSM-5) as a catalytic support. ZnO particles were deposited onto HI-ZSM-5 via precipitation to remediate naproxen (NPX) in wastewater, while Ag was photo-deposited onto ZnO to prevent electron-hole pair recombination. XRD analysis revealed crystalline structures and particle sizes influenced by synthesis temperatures, and FT-IR confirmed ZnO and Ag deposition onto HI-ZSM-5 surfaces. Based on N2 adsorption-desorption isotherms, all samples exhibited Type I and IV isotherms with H4-type hysteresis loops, indicating the presence of both micro- and mesopores within HI-ZSM-5. XPS analysis confirmed the presence of peaks indicating Zn in ZnO and metallic Ag interacting with ZnO. TEM analysis identified aggregated Ag/ZnO nanoparticles in the photocatalysts, while EDX confirmed uniform element distribution. FE-SEM images revealed a uniform distribution of ZnO and Ag on HI-ZSM-5 with “house-of-cards” morphologies. PL analysis indicated reduced electron-hole recombination and an extended lifespan. NPX photodegradation experimental results showed that the reaction rate constant of the 3 %AZ composite was 2.8 times higher than that of ZnO/HI-ZSM-5 (0.0163 vs. 0.059 min−1, respectively). Evaluation of influential operating parameters demonstrated 90.8 % elimination of NPX under optimum conditions: a catalyst dosage of 1.5 g L−1 at pH 5 within 120 min. The impact of common anions on NPX decontamination and the catalyst's capability for COD and TOC removal (up to 62.6 and 53.4 %, respectively) was also discussed. The 3 %AZ optimum catalyst could be recycled for 5 cycles with remarkable reusability, maintaining 80.1 % removal efficiency after five regeneration cycles.

Dual elemental doping activated signaling pathway of angiogenesis and defective heterojunction engineering for effective therapy of MRSA-infected wounds

Multi-drug resistant bacterial infections pose a significant threat to human health. Thus, the development of effective bactericidal strategies is a pressing concern. In this study, a ternary heterostructure (Zn–CN/P-GO/BiS) comprised of Zn-doped graphite phase carbon nitride (g-C3N4), phosphorous-doped graphene oxide (GO) and bismuth sulphide (Bi2S3) is constructed for efficiently treating methicillin-resistant Staphylococcus aureus (MRSA)-infected wound. Zn doping-induced defect sites in g-C3N4 results in a reduced band gap (ΔE) and a smaller energy gap (ΔEST) between the singlet state S1 and triplet state T1, which favours two-photon excitation and accelerates electron transfer. Furthermore, the formation of an internal electric field at the ternary heterogeneous interface optimizes the charge transfer pathway, inhibits the recombination of electron-hole pairs, improves the photodynamic effect of g-C3N4, and enhances its catalytic performance. Therefore, the Zn–CN/P-GO/BiS significantly augments the production of reactive oxygen species and heat under 808 nm NIR (0.67 W cm−2) irradiation, leading to the elimination of 99.60% ± 0.07% MRSA within 20 min. Additionally, the release of essential trace elements (Zn and P) promotes wound healing by activating hypoxia-inducible factor-1 (HIF-1) and peroxisome proliferator-activated receptors (PPAR) signaling pathways. This work provides unique insight into the rapid antibacterial applications of trace element doping and two-photon excitation.

Defect Engineering Centrosymmetric 2D Material Flexocatalysts.

In this study, the flexoelectric characteristics of 2D TiO2 nanosheets are examined. The theoretical calculations and experimental results reveal an excellent strain-induced flexoelectric potential (flexopotential) by an effective defect engineering strategy, which suppresses the recombination of electron-hole pairs, thus substantially improving the catalytic activity of the TiO2 nanosheets in the degradation of Rhodamine B dye and the hydrogen evolution reaction in a dark environment. The results indicate that strain-induced bandgap reduction enhances the catalytic activity of the TiO2 nanosheets. In addition, the TiO2 nanosheets degraded Rhodamine B, with kobs being ≈1.5 × 10-2 min-1 in dark, while TiO2 nanoparticles show only an adsorption effect. 2D TiO2 nanosheets achieve a hydrogen production rate of 137.9 µmol g-1 h-1 under a dark environment, 197% higher than those of TiO2 nanoparticles (70.1 µmol g-1 h-1). The flexopotential of the TiO2 nanosheets is enhanced by increasing thebending moment, with excellent flexopotential along the y-axis. Density functional theory is used to identify the stress-induced bandgap reduction and oxygen vacancy formation, which results in the self-dissociation of H2O on the surface of the TiO in the dark. The present findings provide novel insights into the role of TiO2 flexocatalysis in electrochemical reactions.

Pioneering superior efficiency in Methylene blue and Rhodamine b dye degradation under solar light irradiation using CeO2/Co3O4/g-C3N4 ternary photocatalysts

In this research work, we have successfully synthesized the CeO2/Co3O4/g-C3N4 ternary nanocomposite for hydrothermal method for photocatalytic applications. The synthesized nanocomposites were characterized using X-ray diffraction (XRD), Fourier transform infrared (FTIR) spectroscopy, Field emission scanning electron microscopy (FE-SEM), Transmission electron microscopy TEM, Photoluminescent spectra (PL), X-ray photoelectron spectroscopy (XPS), Brunauer- Emmett-Teller (BET) and Ultraviolet diffuse reflectance spectroscopy (UV-DRS) technique. As per the optical spectroscopic investigations CeO2/Co3O4/g-C3N4 ternary nanocomposite exhibited the high optical absorption range and its band gap is reduced from 2.95 eV to1.83 eV. The PL spectra showed the lowered emission peak intensity of ternary nanocomposite which is revealed that the better charge separation and slow recombination of electron hole pairs. The highest photocatalytic degradation efficiency of CeO2/Co3O4/g-C3N4 ternary nanocomposite showed 93 % and 86 % towards the pollutant methylene blue and Rhodamine B. Moreover, photodegradation of the pollutants followed pseudo-first order kinetics with a very high-rate constant of 0.02211 min−1 and 0.017756 min−1. Additionally, the ternary nano catalyst was delivered the remarkable stability performance even after five cycles. This research may provide a low-cost approach for synthesized visible light responsive catalysts for use in environmental remediation applications.

Hole transfer layer of glucose-derived carbon enabled rapid charge transfer and hole storage for efficient water splitting

Charge recombination at the interface of oxygen evolution catalyst (OEC) and BiVO4-based photoanode is one of the great challenges to achieve efficient photoelectrochemical (PEC) water splitting due to the poor charge transfer and separation efficiency of BiVO4. Herein, a composite photoanode (NiFe/C-Mo:BiVO4) consisting of a molybdenum doped BiVO4 photoanode, an OEC interfacial layer of NiFeOOH and a tailorable hole transfer layer (HTL) made of glucose-derived carbon in between, was designed and fabricated for highly efficient PEC water splitting. The composite NiFe/C-Mo:BiVO4 photoanode exhibited the photocurrent density of 5.62 mA cm−2 at 1.23 VRHE and an outstanding photo-stability. Characterization and photoelectrochemical analyses revealed that the inserted carbon HTL, though not active for surface water oxidation kinetics, greatly suppressed the unwanted recombination of electron-hole pairs and drastically improved the transfer and storage of charge carriers at the OEC/BiVO4 interface. A surface charge separation efficiency of 89 % at 1.23 VRHE and remarkable hole storage properties were obtained. This work afforded a novel approach to the design of low-cost and sustainable HTL integrated photoanodes for efficient PEC water oxidation.

Preparation of Nanoparticle Doped Metal-organic Framework (MOF) and its Potential Use for Photodegradation of Antibiotics in Water: A Review

Abstract: Semiconductors have gained recognition as efficient photocatalysts for the degradation of antibiotics in water. However, their performance is limited due to poor absorption of light, recombination of electron-hole pairs, and poor recovery from an aqueous solution. This study reviewed the inclusion of semiconductor nanoparticles in a metal-organic framework (MOF), forming nanoparticle@ MOF composite to overcome these challenges. Three methods including ship-in-bottle, bottlearound- ship, and one-step synthesis were identified for the synthesis of nanoparticle@MOF composite. Among the synthesis methods, the one-step method remains promising with high prospects. Nanoparticle@ MOF composite has exhibited high efficiency in removing antibiotics in an aqueous system utilizing visible light as a photo source for promoting the process. Despite the success achieved, there is a need for large-scale studies and cost evaluation to understand better the feasibility and economic implications of the nanoparticle@MOF composite technique as an affordable technique for the purification of an antibiotic-contaminated water system.

A Photochemically Active Cu2O Nanoparticle Endows Scaffolds with Good Antibacterial Performance by Efficiently Generating Reactive Oxygen Species.

Cuprous oxide (Cu2O) has great potential in photodynamic therapy for implant-associated infections due to its good biocompatibility and photoelectric properties. Nevertheless, the rapid recombination of electrons and holes weakens its photodynamic antibacterial effect. In this work, a new nanosystem (Cu2O@rGO) with excellent photodynamic performance was designed via the in situ growth of Cu2O on reduced graphene oxide (rGO). Specifically, rGO with lower Fermi levels served as an electron trap to capture photoexcited electrons from Cu2O, thereby promoting electron-hole separation. More importantly, the surface of rGO could quickly transfer electrons from Cu2O owing to its excellent conductivity, thus efficiently suppressing the recombination of electron-hole pairs. Subsequently, the Cu2O@rGO nanoparticle was introduced into poly-L-lactic acid (PLLA) powder to prepare PLLA/Cu2O@rGO porous scaffolds through selective laser sintering. Photochemical analysis showed that the photocurrent of Cu2O@rGO increased by about two times after the incorporation of GO nanosheets, thus enhancing the efficiency of photogenerated charge carriers and promoting electron-hole separation. Moreover, the ROS production of the PLLA/Cu2O@rGO scaffold was significantly increased by about two times as compared with that of the PLLA/Cu2O scaffold. The antibacterial results showed that PLLA/Cu2O@rGO possessed antibacterial rates of 83.7% and 81.3% against Escherichia coli and Staphylococcus aureus, respectively. In summary, this work provides an effective strategy for combating implant-related infections.

Schottky Barrier-Based Built-In Electric Field for Enhanced Tumor Photodynamic Therapy.

Photodynamic therapy's antitumor efficacy is hindered by the inefficient generation of reactive oxygen species (ROS) due to the photogenerated electron-hole pairs recombination of photosensitizers (PS). Therefore, there is an urgent need to develop efficient PSs with enhanced carrier dynamics. Herein, we designed Schottky junctions composed of cobalt tetroxide and palladium nanocubes (Co3O4@Pd) with a built-in electric field as effective PS. The built-in electric field enhanced photogenerated charge separation and migration, resulting in the generation of abundant electron-hole pairs and allowing effective production of ROS. Thanks to the built-in electric field, the photocurrent intensity and carrier lifetime of Co3O4@Pd were approximately 2 and 3 times those of Co3O4, respectively. Besides, the signal intensity of hydroxyl radical and singlet oxygen increased to 253.4% and 135.9%, respectively. Moreover, the localized surface plasmon resonance effect of Pd also enhanced the photothermal conversion efficiency of Co3O4@Pd to 40.50%. In vitro cellular level and in vivo xenograft model evaluations demonstrated that Co3O4@Pd could generate large amounts of ROS, trigger apoptosis, and inhibit tumor growth under near-infrared laser irradiation. Generally, this study reveals the contribution of the built-in electric field to improving photodynamic performance and provides new ideas for designing efficient inorganic PSs.

High temperature synthesis, surface characterization, and photoluminescence property of boron carbon nitride

The present study demonstrates the synthesis of boron carbon nitride (BCN) by molten salt method which utilizes melamine (source of carbon and nitrogen), boric acid (source of boron) and potassium chloride as the salt. The synthesis is performed at 915 °C for 4 h under N2-atmosphere. The synthesized material is further acid-treated. The physicochemical characterization data for as-synthesized and acid-treated materials confirm successful synthesis of BCN. SEM and AFM data display that synthesized BCN pre and post acid-treatment exhibit sheet-type morphology. Thermogravimetric analysis data confirm that the acid-treated material is thermally stable up to 800 °C, with only 2 % mass-loss is observed till 800 °C. Water contact angle measurement study demonstrates that acid-treatment significantly improves the surface hydrophilicity. Additionally, the low photoluminescence peak intensity of the acid-treated material indicates low electron-hole pair recombination rate. The synthesized material may be useful for the photocatalytic degradation of potentially toxic chemicals from water.

Enhancing tetracycline degradation with biomass carbon quantum dot (CQDs)-modified magnetic heterojunction CeO2-Fe3O4 under visible light

This research investigates the synergistic enhancement of semiconductor catalysts through the incorporation of carbon quantum dots (CQDs) within CeO2-Fe3O4 Type-II heterojunction photocatalysts. Subsequent to the successful synthesis of these modified photocatalysts, a thorough assessment of their catalytic performance is conducted. Notably, the introduction of CQDs results in a 21% increase in pollutant degradation capacity compared to unmodified heterojunctions, with a remarkable removal efficiency of 96% for the target pollutant TC. Comprehensive analyses employing electrochemical impedance spectroscopy (EIS), UV–vis spectroscopy, and photocatalytic experiments provide substantial evidence for the efficacy of CQDs in enhancing light absorption properties within the CeO2-Fe3O4 heterojunction. This enhancement is attributed to a notable suppression of electron-hole pair recombination, facilitating the generation of reactive oxygen species (ROS) such as ·O2- and ·OH. This, in turn, the promotion of Ce4+/Ce3+ and Fe3+/Fe2+ cycles takes place, collectively enhancing the responsiveness of the photocatalyst to visible light. The photocatalysts demonstrate enduring catalytic and magnetic stability over five cycles, as indicated by the sustained high-performance retention. Detailed analysis using TOF-LC-MS has revealed two highly efficient degradation pathways for the for the target pollutant. The findings contribute valuable insights for advancing the performance of heterojunction photocatalysts.