Electronic Transition Energies Research Articles

Understanding the behavior of a potential anticancer lamotrigine in explicit solvent (water and DMSO) using quantum mechanical tools and abinitio molecular dynamics

Lamotrigine is a medication used to treat epilepsy and help stabilize mood in individuals with bipolar disorder. Epilepsy includes different types of seizures, such as focal seizures, tonic-clonic seizures, and Lennox-Gastaut syndrome, and Lamotrigine is specifically designed to manage this condition. The effectiveness of the drug relies on how it interacts with different liquid environments. In our study, we employed two methods, namely PBE0-D3/def2-TZVP, for optimizations and various calculations. We utilized this approach for NBO, NCI, and wavefunction assay. Additionally, we used PBE0-D3/def2-TZVP and DLPNO-CCSD(T) for analyzing LED, MD, and the bond energy of Lamotrigine in both a vacuum and a complex setting (with water and DMSO). Our findings revealed that Lamotrigine can break down into four fragments: triazine, dichlorophenyl-, 10 amine at the second position in triazine, and 10 amines at the fourth position in triazine. The bond energy for these fragments is measured at 351.84 kcal/mol. NBO provided insights into the electronic transition energies of Lamotrigine in different environments, including a vacuum and with solvents. NCI helped us understand the non-covalent interactions of Lamotrigine in both a vacuum and with water and DMSO (complex) molecules through their two pores: inter and intra interactions. We further explored binding energies and total binding energies of Lamotrigine with water and DMSO. Simulations indicated that Lamotrigine with DMSO pore1 exhibited the highest energy changes over time with a positive sign, while Lamotrigine with water pore2 showed the lowest energy changes over time with a negative sign. In our implicit solvation assay using the SMD model and the CPCM method, we found that Lamotrigine with water had a lower free energy compared to the Lamotrigine-DMSO system.

Excited States in Single-Stranded and i-Motif DNA with Silver Ions.

We have studied the excited states and structural properties for the complexes of cytosine (dC)10 chains with silver ions (Ag+) in a wide range of the Ag+ to DNA ratio (r) and pH conditions using circular dichroism, steady-state absorption, and fluorescence spectroscopy along with the ultrafast fluorescence upconversion technique. We also calculated vertical electronic transition energies and determined the nature of the corresponding excited states in some models of the cytosine-Ag+ complexes. We show that (dC)10 chains in the presence of silver ions form a duplex stabilized by C-Ag+-C bonds. It is also shown that the i-motif structure formed by (dC)10 chains is destabilized in the presence of Ag+ ions. The excited-state properties in the studied complexes depend on the amount of binding ions and the binding sites, which is supported by the calculations. In particular, new low-lying excited states appear when the second Ag+ ion interacts with the O atom of cytosine in the C-Ag+-C pairs. A similar picture is observed in the case when one Ag+ ion interacts with one cytosine via the N7 atom.

Dynamic strain coupling driven by structural phase transition in mixed-dimensional 2H-MoS2/VO2 van der Waals heterointerfaces

Mixed-dimensional van der Waals (vdW) heterostructures, integrated two-dimensional (2D) atomic crystals with three-dimensional (3D) functional materials, offer a powerful means to manipulating physical properties and generating unprecedented functionalities. Understanding interfacial couplings at those hetero (homo)-interfaces is indispensable for exploring new optical and electronic devices. Herein, we investigated dynamically phase-transition-driven strain coupling across a vdW heterointerface through integrating 2D layered 2H-MoS2 nanoflakes onto 3D phase-change VO2 epitaxial thin films. The Raman peak positions of the in-plane and out-of-plane vibration modes E2g1 and A1g from the 2H-MoS2 nanoflakes show a phonon softening and reversible hysteresis loop as a function of temperature in this mixed-dimensional vdW 2H-MoS2/(1¯11)-VO2/(11¯02)-Al2O3 heterostructure, originating from the co-action of temperature-dependent anharmonicity in 2H-MoS2 and reversible structural phase transition (SPT)-induced in-plane tensile strain from the VO2 thin film. Accordingly, the integrated Raman scattering intensity of these two feature peaks of the 2H-MoS2 nanoflakes increased (decreased) as the temperature increased (decreased), exhibiting a hysteresis loop in the SPT and metal–insulator transition region of VO2. Additionally, the peak integrated intensity enhancement ratio of the E2g1 and A1g vibration modes was approximately 2.3 and 2.8, respectively. These results indicate that the dynamically SPT-driven in-plane tensile strain from the bottom VO2 layer interfacially couples with the adjacent 2H-MoS2 nanoflakes and results in a reduction in the electronic transition energy, leading to an enhancement in the Raman scattering intensity of 2H-MoS2. Our work holds promise for dynamic strain control of lattice dynamics and electron–phonon interaction of 2D materials for functional electronic and photoelectronic devices.

Electric-Tree Resistant Performance and Thermal Charge-Carrier Dissipation Mechanism of Voltage Stabilizer-Modified EPDM

In order to improve electric-tree resistant performance and dielectric breakdown strength of ethylene-propylene-diene misch-polymere (EPDM) material used for cable accessory reinforce insulation, the two specific aromatic ketone compounds—vinylphenylacetone (VPE) and 4-propylene oxyxy-2-hydroxydibenzenone (AOHBP) are employed as two paradigms of voltage stabilizer for chemical-graft modifications. Electric-tree resistances and insulation performances of modified EPDM materials and their charge trapping mechanism of thermoelectron inhibitions are studied by the accelerated electric-tree aging experiments, alternating current (AC) dielectric breakdown tests, surface potential trap-level analyses and first-principles calculations. Both the two species of voltage stabilizers are effective for promoting electric-tree inception voltage and dielectric breakdown strength, leading to a high extension of electric-tree morphology and smaller dimension of electric-trees growth, in which AOHBP is more significant. The two species of voltage stabilizers have been successfully grafted onto EPDM molecular-chains in thermal-chemistry crosslinking reactions of EPDM, introducing multiple shallow levels of charge traps, which reduces the energy released by trapping charge carriers and thus alleviates electric-tree aging of EPDM. The AOHBP and VPE represent a high electron affinity and a small electronic energy gap, which is competent of assimilating the kinetic energies of hot charge carriers whilst restricting Auger electronic excitation. Especially, the benzene group in voltage stabilizer renders shallow level charge traps with a larger carrier capture cross-section than deep traps and simultaneously possesses the high atomic vibration frequencies similar as electronic-transition energies, which results in effective dissipation on the kinetic energies of hot charge carriers. This mechanism dominates to increase electric-tree resistance and insulation strength of EPDM. The present study proves the important role of voltage stabilizers in improving insulation performance of EPDM material, and reveals the refrigeration mechanism on hot charge carriers for restricting electric-tree growth, which provides a significant strategy of chemical modifications for developing high-insulation cable accessory materials.

Bias-Tunable Quantum Well Infrared Photodetector.

With the rapid advancement of Artificial Intelligence-driven object recognition, the development of cognitive tunable imaging sensors has become a critically important field. In this paper, we demonstrate an infrared (IR) sensor with spectral tunability controlled by the applied bias between the long-wave and mid-wave IR spectral regions. The sensor is a Quantum Well Infrared Photodetector (QWIP) containing asymmetrically doped double QWs where the external electric field alters the electron population in the wells and hence spectral responsivity. The design rules are obtained by calculating the electronic transition energies for symmetric and antisymmetric double-QW states using a Schrödinger-Poisson solver. The sensor is grown and characterized aiming detection in mid-wave (~5 µm) to long-wave IR (~8 µm) spectral ranges. The structure is grown using molecular beam epitaxy (MBE) and contains 25 periods of coupled double GaAs QWs and Al0.38Ga0.62As barriers. One of the QWs in the pair is modulation-doped to provide asymmetry in potential. The QWIPs are tested with blackbody radiation and FTIR down to 77 K. As a result, the ratio of the responsivities of the two bands at about 5.5 and 8 µm is controlled over an order of magnitude demonstrating tunability between MWIR and LWIR spectral regions. Separate experiments using parameterized image transformations of wideband LWIR imagery are performed to lay the framework for utilizing tunable QWIP sensors in object recognition applications.

The LSU-Argonne conversion electron spectrometer: A new detector for the X-Array and SATURN decay station

A new conversion electron detector has been commissioned at the ATLAS/ CARIBU facility at Argonne National Laboratory. The LSU-Argonne Conversion Electron Spectrometer (LACES) is a LN2-cooled Si(Li) detector system designed to be incorporated into a decay station that comprises the dedicated HPGe clover array with a box geometry (X-Array) and the Scintillator and Tape Using Radioactive Nuclei (SATURN) device. This integration enables simultaneous measurements of conversion electrons and gamma-rays in decay experiments, yielding novel information on transition multipolarities, electric monopole transitions, and isomeric states that decay mostly via conversion electrons. A measurement of the energy resolution of LACES yielded 2.3-keV FWHM at 975 keV for electrons and 1.3-keV FWHM at 75 keV for X-rays. A detailed study of the absolute detection efficiency (at 5 mm from the source) was performed, where this quantity was determined experimentally in the range of electron transition energies between 25.5 keV and 1047.8 keV and subsequently simulated using the GEANT4 code. Measurement and simulations are found to be in excellent agreement. A precise characterization, for this type of detector system, of the absolute detection efficiency for such a wide energy range is reported for the first time.

The violet laser irradiation influence on the dispersive properties of the PVA/MO composite thick

Polyvinyl alcohol (PVA) polymer, methyl orange (MO) and their composite was dissolved in water in order to prepare films with different thickness by casting method. The films were irradiated by a violet laser with a wavelength 405 nm for different times (0, 10, 20, 30 and 40) minute. The dispersion parameters were calculated before and after exposure to the laser using the Wemple–DiDomenico method. Dispersion energy (E d) and the single oscillator energy of electronic transition (E o) were increased with increasing the irradiating time for PVA, MO and PVA/MO thick films. This is useful to modify geometrical and optical specifications for materials which has many applications especially in the medical field. The Urbach energy also can be controlled by the irradiation times since it decreased with increasing the laser irradiation time which can be used to enhance the structure of the material.

Ligand-Induced Intramolecular Redox Diversity in Titanium Complexes with Acenaphthene-1,2-diimine.

A series of the chlorido and alkoxychlorido titanium complexes of the general formula (dpp-Bian)Ti(OiPr)nCl3-n, where dpp-Bian = 1,2-bis[(2,6-iPr2C6H3)imino]acenaphthene n = 0 (2), 1 (3), 2 (4), as well as (dpp-Bian)Ti(OiPr)2 (5) and (dpp-Bian)Ti(OiPr)Cl3 (3-Cl), were isolated and characterized using single-crystal X-ray diffraction analysis and spectroscopic studies combined with density functional theory (DFT) calculations. In the solid state, compounds 2-4 reveal a square-pyramidal geometry at the metal center supported with monoanionic dpp-Bian, whereas 3-Cl with a neutral diimine ligand and 5 bearing a dianionic enebisamide dpp-Bian show, respectively, an octahedral and tetrahedral coordination surrounding the metal ion. Paramagnetic complexes 2-4 exhibit electron paramagnetic resonance spectra in both toluene solution and solid state, confirming the transfer of spin density from the metal ion to the dpp-Bian ligand as the number of alkoxy groups increases. The increase in polarity of the Ti-N bonds in the row 2 < 3 < 4 contributes to enhanced stability of the metal complexes with respect to O-donor molecules. Thus, in tetrahydrofuran (THF), compounds 2 and 3 undergo reversible solvolysis, whereas complex 4 is stable. The charge and spin density distributions as well as molecular orbital energies in 2-4 were analyzed on the basis of DFT calculations which also provided information on the electronic transition energies, absorption band assignments, and thermodynamic parameters of the reactions between the complexes and THF.

Solvatochromism, optical and electronic properties of thiosemicarbazone derivatives in solution phase

The electronic structure, solvatochromic and some optoelectronic properties of five different thiosemicarbazone (TSCs) derivatives with different substituents consisted from indole ring, benzyl ring and conjugated thiosemicarbazide have been investigated in detail. UV–vis. absorption spectra of TSC compounds have been analyzed in solvent media with different polarity. The spectral changes are observed to forming of solvent effects and substituents. Spectral behaviors and electronic transitions are interpreted based on the UV-Vis. spectra. Solvatochromic behaviors were defined by linear solvation energy relationships via multiple linear regression analysis by using Kamlet-Abboud-Taft and Catalán parameters. In addition, the correlations of electronic absorption transition energy with Marcus optical dielectric parameter and Reichardt-Dimroth parameter were also determined. Some optoelectronic parameters such as forbidden band gap energy and refractive index have been determined in different solvent medium. Thiosemicarbazone derivatives have a global electronic absorption transition energy of about 3.351 eV. According to LSER calculations, polarizability-induction of electronic transitions of the investigated molecules is effective. The (E)-4-(4-nitrobenzyl)-1-(2-oxo-2H-indol-3(3aH)-ylidene)thiosemicarbazide (TSC-B) compound that does not a methoxy group and contain nitro group substituent and has the highest forbidden energy range.

Direct determination of high-concentration As(III) by UV high-reference differential absorption spectroscopy for cleaner As(III) removal promotion via sulfurization

The current methods for determining high-concentration As(III) in the high-acid matrix from the copper smelting industry are complex, time-consuming, and costly. This limits effective modulation of sulfurizing agent dosage for As(III) removal via sulfurization, aggravating hazardous waste generation. Herein, a simple, rapid, and nondestructive UV high-reference differential absorption spectroscopy was developed to directly determine high-concentration As(III) in simulated high-acid wastewater. Time-dependent density functional theory calculations indicated that the spectral curve redshift with As(III) concentration increasing was related to the decrease of electron transition energies and energy gaps. When using high-reference solutions, the least redshift in the maximum absorption wavelength and the highest upper limit of linear fitting concentration could be obtained. Therefore, the piecewise quantitative linear model of differential absorbance and concentration was established under high-reference. The quantitative range of the model within 0.06–20.00 g/L As(III) with a mean relative error of < 5.0 % and standard recovery rates within 98.0 %-104.0 % indicated high accuracy. Additionally, the relative standard deviations of < 1.5 % (n = 5) revealed good precision. All results indicated the high feasibility of the developed method in alleviating linear deviation caused by redshift and absorption saturation. Furthermore, it has potential significance in saving sulfurizing agent dosage and reducing hazardous waste generation from the source, thereby facilitating a cleaner process for removing As(III) via sulfurization.

Prediction of Paracetamol Solubility in Binary Solvents Using Reichardt’s Polarity Parameter Combined Model

The objective of this research is to propose a general model utilizing the solvatochromic polarity of electronic transition energy (ET) of the Reichardt indicator to predict paracetamol solubility in the solvent mixtures. In order to model validation, the available ET (30) values of nine aqueous mixtures obtained from existing literature sources were utilized. The trained model yielded a relatively accurate estimation of paracetamol solubility in the investigated systems.

Tailoring TiO2 finite nanotubes: Doping-induced modulation of electronic, optical, and hydrogen storage properties

In this study, we employ density functional theory calculations to investigate the properties of finite single walled TiO2 finite nanotubes (TiO2NTs). The constructed nanotubes demonstrate geometric stability, as evidenced by positive binding energy and real positive vibrational frequencies obtained from the infrared spectra. Substitutional doping with various atoms (B, N, C, Si, Li, Sc, Fe, and Cu) introduces intriguing effects on the electronic and optical properties of TiO2NTs. Doping with Fe slightly reduces the wide energy gap (∼5 eV) of unmodified TiO2NTs to 4.2 eV, while Si doping significantly decreases the energy gap by half. Furthermore, we investigate the impact of doping TiO2NTs with boron, carbon, nitrogen, iron, cesium, and silicon on their UV–Vis absorption spectra. The introduction of these dopants induces significant redshifts in the absorption peaks, indicating alterations in the electronic energy gap and transitions between specific states. These findings provide valuable insights into the structural and electronic modifications of TiO2NTs. Moreover, we explore the adsorption properties of TiO2NTs for H2 molecules. While unmodified TiO2NTs exhibit low adsorption energy, doping with a small number of C or Si atoms leads to a substantial enhancement in the adsorption energy. Specifically, Si doping achieves adsorption energy of approximately 0.2 eV, accompanied by a hydrogen storage capacity of 6.1 wt%, exceeding the standard capacity of 6.0 wt%. Importantly, the desorption temperature remains comparable to room temperature, ensuring long-term recyclability. These results highlight the potential of doped single-walled TiO2 nanotubes as efficient hydrogen storage devices.

Ligand-Mediated Regulation of the Chemical/Thermal Stability and Catalytic Performance of Isostructural Cobalt(II) Coordination Polymers.

Regulating the chemical/thermal stability and catalytic activity of coordination polymers (CPs) to achieve high catalytic performance is topical and challenging. The CPs are competent in promoting oxidative cross-coupling, yet they have not received substantial attention. Here, the ligand effect of the secondary ligand of CPs for oxidative cross-coupling reactions was investigated. Specifically, four new isostructural CPs [Co(Fbtx)1.5(4-R-1,2-BDC)]n (denoted as Co-CP-R, Fbtx = 1,4-bis(1,2,4-triazole-1-ylmethyl)-2,3,5,6-tetrafluorobenzene, 4-R-1,2-BDC = 4-R-1,2-benzenedicarboxylate, R = F, Cl, Br, CF3) were prepared. It was found that in the reactions of oxidative amination of benzoxazoles with secondary amines and the oxidative coupling of styrenes with benzaldehydes, both the chemical and thermal stabilities of the four Co-CPs with the R group followed the trend of -CF3 > -Br > -Cl > -F. Density functional theory (DFT) calculations suggested that the difference in reactivity may be ascribed to the effect of substituent groups on the electron transition energy of the cobalt(II) center of these Co-CPs. These findings highlight the secondary ligand effect in regulating the stability and catalytic performance of coordination networks.

Tetramethylalloxazines as efficient singlet oxygen photosensitizers and potential redox-sensitive agents

Tetramethylalloxazines (TMeAll) have been found to have a high quantum yield of singlet oxygen generation when used as photosensitizers. Their electronic structure and transition energies (S0 → Si, S0 → Ti, T1 → Ti) were calculated using DFT and TD-DFT methods and compared to experimental absorption spectra. Generally, TMeAll display an energy diagram similar to other derivatives belonging to the alloxazine class of compounds, namely π,π* transitions are accompanied by closely located n,π* transitions. Photophysical data such as quantum yields of fluorescence, fluorescence lifetimes, and nonradiative rate constants were also studied in methanol (MeOH), acetonitrile (ACN), and 1,2-dichloroethane (DCE). The transient absorption spectra were also analyzed. To assess cytotoxicity of new compounds, a hemolytic assay was performed using human red blood cells (RBC) in vitro. Subsequently, fluorescence lifetime imaging experiments (FLIM) were performed on RBC under physiological and oxidative stress conditions alone or in the presence of TMeAll allowing for pinpointing changes caused by those compounds on the intracellular environment of these cells.

The Amoebicidal Activity of Diferrocenyl Derivatives: A Significant Dependence on the Electronic Environment.

Amoebiasis is the second leading cause of death worldwide associated with parasitic disease and is becoming a critical health problem in low-income countries, urging new treatment alternatives. One of the most promising strategies is enhancing the redox imbalance within these susceptible parasites related to their limited antioxidant defense system. Metal-based drugs represent a perfect option due to their extraordinary capacity to stabilize different oxidation states and adopt diverse geometries, allowing their interaction with several molecular targets. This work describes the amoebicidal activity of five 2-(Z-2,3-diferrocenylvinyl)-4X-4,5-dihydrooxazole derivatives (X = H (3a), Me (3b), iPr (3c), Ph (3d), and benzyl (3e)) on Entamoeba histolytica trophozoites and the physicochemical, experimental, and theoretical properties that can be used to describe the antiproliferative activity. The growth inhibition capacity of these organometallic compounds is strongly related to a fine balance between the compounds' redox potential and hydrophilic character. The antiproliferative activity of diferrocenyl derivatives studied herein could be described either with the redox potential, the energy of electronic transitions, logP, or the calculated HOMO-LUMO values. Compound 3d presents the highest antiproliferative activity of the series with an IC50 of 23 µM. However, the results of this work provide a pipeline to improve the amoebicidal activity of these compounds through the directed modification of their electronic environment.

Second-sphere tuning of analogues for the ferric-hydroperoxoheme form of Mycobacterium tuberculosis MhuD

Mycobacterium tuberculosis MhuD catalyzes the oxygenation of heme to mycobilin; experimental data presented here elucidates the novel hydroxylation reaction catalyzed by this enzyme. Analogues for the critical ferric–hydroperoxoheme (MhuD–heme–OOH) intermediate of this enzyme were characterized using UV/Vis absorption (Abs), circular dichroism (CD), and magnetic CD (MCD) spectroscopies. In order to extract electronic transition energies from these spectroscopic data, a novel global fitting model was developed for analysis of UV/Vis Abs, CD, and MCD data. A variant of MhuD was prepared, N7S, which weakens the affinity of heme-bound enzyme for a hydroperoxo analogue, azide, without significantly altering the protein secondary structure. Global fitting of spectroscopic data acquired in this study revealed that the second-sphere N7S substitution perturbs the electronic structure of two analogues for MhuD–heme–OOH: azide-inhibited MhuD (MhuD–heme–N3) and cyanide-inhibited MhuD (MhuD–heme–CN). The ground state electronic structures of MhuD–heme–N3 and MhuD–heme–CN were assessed using variable-temperature, variable-field MCD. Altogether, these data strongly suggest that there is a hydrogen bond between the Asn7 side-chain and the terminal oxygen of the hydroperoxo ligand in MhuD–heme–OOH. As discussed herein, this finding supports a novel hydroxylation reaction mechanism where the Asn7 side-chain guides a transient hydroxyl radical derived from homolysis of the OO bond in MhuD–heme–OOH to the β- or δ-meso carbon of the porphyrin ligand yielding β- or δ-meso-hydroxyheme, respectively.

Electron energy spectrum of the non-concentric spherical core-shell quantum dot

It was suggested the model of the spherical core-shell quantum dot with shifted core from common center. In the paper the effective mass approximation has been used and the Schrödinger equation has been solved by using the plane wave method. The electron energy spectra have been defined as a function of the both core radius and shell radius in the case of shifted core from the spherical center. Also, the dependence of the electron energy spectrum on the core/shell position has been calculated. The splitting of electron energy levels has been analyzed in the cases of different core position. That is why electron energy transitions will be different in comparison to the case of a no-shifted core.

Evaluation of Molecular Fragmentation in Polycyclic Aromatic Hydrocarbons by Time-of-Flight Secondary Ion Mass Spectrometry

In time-of-flight secondary ion mass spectrometry (TOF-SIMS), ionized molecules and molecular fragments (secondary ions) are generated in collisions of high-energy ions (primary ions) with a solid sample surface. Mass spectra of the emitted secondary ions are typically used to identify molecular species and to determine their spatial distribution on the sample surface. Here, we extend this application in a TOF-SIMS study of a series of polycyclic aromatic hydrocarbons (PAHs) where we focus on the fragmentation of these molecules, with the purpose of better understanding the fragmentation patterns of heavy aromatic molecules in petroleum. For all PAHs, the collision process generated (i) a series of smaller cation fragments and (ii) cations close in size to the original PAH (molecular cations). Stark differences are measured for various PAHs regarding the abundance of smaller fragments versus molecular cations. Observation of hydrogen-deficient (H-deficient) cation fragments indicates the formation of polyynes and allenes. For PAHs producing higher fractions of small cation fragments, these ions are surprisingly hydrogen rich (H-rich). The H/C ratio of fragments does not scale with the fraction of Clar sextet carbon, nor with energies of low-lying electronic transitions. Free radical cation fragments tend to be suppressed. For sufficiently large fragments, aromatic cations appear to be formed and include some free radical aromatics. There is ample production of molecular ions with loss of a single carbon atom or a methine group, which corresponds to the reduction of a 6-membered aromatic ring to a 5-membered ring. There is some enhancement of free radical molecular cations due to the corresponding formation of neutral polyynes. Fragment anions are also produced with a strong preference for very H-deficient carbon clusters, in some cases being the same as carbon cluster anions observed in space. Comparisons of PAH TOF-SIMS spectra with those of asphaltenes are discussed in detail.

Interband Electron Transitions Energy in Multiple HgCdTe Quantum Wells at Room Temperature

The studies of the interband electron transition energy in multiple Hg1-xCdxTe/Hg1-yCdyTe quantum wells (MQWs) at room temperature were carried out. The MQWs were grown on the (013) GaAs substrate by molecular beam epitaxy, with the layer composition and thickness being measured by the in-situ ellipsometric parameters measurement at the nanometer level. The Hg1-xCdxTe barrier composition and width were x = 0.69 and 30 nm, respectively. The Hg1-yCdyTe well composition was y = 0.06–0.10, and the width varied in the range of 2.7–13 nm. The experimental data of the interband electron transition energy were determined by the absorption spectral analysis. The calculation of the interband electron transition energy was carried out on the basis of the four-band Kane model. A good agreement between the experimental and calculated data was obtained. It was shown that MQWs may be used as a photosensitive material for creating infrared optoelectronic devices operating in different modes in the range of 3–10 μm at room temperature.

Structural and Spectroscopic Effects of Li+ Substitution for Na+ in LixNa1−xCaLa0.5Er0.05Yb0.45(MoO4)3 Upconversion Scheelite-Type Phosphors

New triple molybdates LixNa1−xCaLa0.5(MoO4)3:Er3+0.05/Yb3+0.45 (x = 0, 0.05, 0.1, 0.2, 0.3) were manufactured successfully using the microwave-assisted sol-gel-based technique (MAS). Their room-temperature crystal structures were determined in space group I41/a by Rietveld analysis. The compounds were found to have a scheelite-type structure. In Li-substituted samples, the sites of big cations were occupied by a mixture of (Li, Na, La, Er, Yb) ions, which provided a linear cell volume decrease with the Li content increase. The increased upconversion (UC) efficiency and Raman spectroscopic properties of the phosphors were discussed in detail. The mechanism of optimization of upconversion luminescence upon Li content variation was shown to be due to the control of excitation/energy transfer channel, while the control of luminescence channels played a minor role. The UC luminescence maximized at lithium content x = 0.05. The mechanism of UC optimization was shown to be due to the control of excitation/energy transfer channel, while the control of luminescence channels played a minor role. Over the whole spectral range, the Raman spectra of LixNa1−xCaLa0.5(MoO4)3 doped with Er3+ and Yb3+ ions were totally superimposed with the luminescence signal of Er3+ ions, and increasing the Li+ content resulted in the difference of Er3+ multiple intensity. The density functional theory calculations with the account for the structural disorder in the system of Li, Na, Ca, La, Er and Yb ions revealed the bandgap variation from 3.99 to 4.137 eV due to the changing of Li content. It was found that the direct electronic transition energy was close to the indirect one for all compounds. The determined chromaticity points (ICP) of the LiNaCaLa(MoO4)3:Er3+,Yb3+ phosphors were in good relation to the equal-energy point in the standard CIE (Commission Internationale de L’Eclairage) coordinates.