Electronic Transition Energies Research Articles

Analytic First-Order Derivatives of CASPT2 Combined with the Polarizable Continuum Model.

The complete active space second-order perturbation theory (CASPT2) is valuable for accurately predicting electronic structures and transition energies. However, optimizing molecular geometries in the solution phase has proven challenging. In this study, we develop analytic first-order derivatives of CASPT2 using an implicit solvation model, specifically the polarizable continuum model, within the open-source package OpenMolcas. Analytic gradients and nonadiabatic coupling vectors are computed by solving a modified Z-vector equation. Comparisons with existing theoretical and experimental results demonstrate that the solvent effects can be qualitatively captured using the developed method.

Electronic structure and energy transitions in oxides and fluorides doped by octahedrally surrounded Cr3+ ions

Electronic structure and energy transitions in oxides and fluorides doped by octahedrally surrounded Cr3+ ions

Ultrafast Mapping of Electronic and Nuclear Structure in the Photo Dissociation of Nitrogen Dioxide.

We investigate the photoinduced dissociation reaction of NO2 → NO + O upon electronic excitation of the X̃2A1 (D0) to the Ã2B2 (D1) state by femtosecond X-ray absorption spectroscopy at the nitrogen K-edge. We obtain key insight into the chemical bond breaking event and its associated electronic structural dynamics. Calculations of the photoinduced reaction allow to assign the transient absorption features at time scales of 10-50 fs to wave packet motions in the excited D1 and ground D0 states, followed by the formation of the NO photoproduct with a 255 ± 23 fs time constant. Our analysis shows that there is no direct correlation between the 1s core levels and the electronic ground and excited states transition energies and the bond elongation of NO2, while en route to dissociation toward the NO + O photoproducts, in the transient nitrogen K-edge spectra. However, simulations predict that for a sufficiently short UV pump pulse, the early wave packet dynamics in the D1 electronic excited state occurring within the first 35 fs along the bending and symmetric stretching modes can be directly mapped in the transient X-ray absorption spectra.

Spectroscopic signatures of the S0, S1, and D0 states of indan: An experimental and theoretical investigation

The electronic and vibrational spectra of indan were explored through the utilization of Fourier transform infrared (FT-IR) spectrum, one-color resonant two-photon ionization (1C-R2PI) spectrum, and two-color resonant two-photon ionization (2C-R2PI) slow electron velocity-map imaging (SEVI) techniques in combination with quantum chemical calculations. Experimental spectra are found to be in good overall accordance with the theoretical calculations. The vibrational modes of the S0 neutral ground state, S1 first electronic excited state, and D0 cationic ground state were assigned with the assistance of density functional theory (DFT) calculations. The S1 ← S0 electronic transition energy was determined to be 36909 ± 5 cm−1 from the one-color resonant two-photon ionization spectrum. Moreover, the adiabatic ionization energy was deduced as 68419 ± 6 cm−1 based on the SEVI spectra.

Pressure-Induced Structural Phase Transition and Fluorescence Enhancement of Double Perovskite Material Cs2NaHoCl6

Cs2NaHoCl6, a double perovskite material, has demonstrated extensive application potential in the fields of anti-counterfeiting and optoelectronics. The synthesis of Cs2NaHoCl6 crystals was achieved using a hydrothermal method, followed by the determination of their crystal structures through single crystal X-ray diffraction techniques. The material exhibits bright red fluorescence when exposed to ultraviolet light, confirming its excellent optical properties. An in situ high-pressure fluorescence experiment was conducted on Cs2NaHoCl6 up to 10 GPa at room temperature. The results indicate that the material possibly undergoes a structural phase transition within the pressure range of 6.9–7.9 GPa, which is accompanied by a significant enhancement in fluorescence. Geometric optimization based on density functional theory (DFT) revealed a significant decrease in the bond lengths and crystal volumes of Ho-Cl and Na-Cl across the predicted phase transition range. Furthermore, it was observed that the bond lengths of Na-Cl and Ho-Cl reach an equivalent state within this phase transition interval. The alteration in bond length may modify the local crystal field strength surrounding Ho3+, consequently affecting its electronic transition energy levels. This could be the primary factor contributing to the structural phase transition.

Measuring the molecular Migdal effect with neutron scattering on diatomic gases

The Migdal effect is a key inelastic signal channel which could be used to detect low-mass dark matter, but it has never been observed experimentally using Standard Model probes. Here we propose a conceptual design for an experiment which could detect the Migdal effect in diatomic molecules through low-energy neutron scattering, and we provide the requirements on the beam spectrum and reducible backgrounds such that a detection may be achieved. The enhancement of the Migdal rate through non-adiabatic couplings, which are absent in isolated atoms, combined with the distinctive photon energies of electronic transitions in CO, suggest that a positive detection of the molecular Migdal effect may be possible with modest beam times at existing neutron facilities. Published by the American Physical Society 2024

Near-Infrared Room-Temperature Phosphorescence from Monocyclic Luminophores.

Compact luminophores with long emission wavelengths have aroused considerable theoretical and practical interest. Organics with room-temperature phosphorescence (RTP) are also desirable for their longer lifetimes and larger Stokes shifts than fluorescence. Utilizing the low electronic transition energy intrinsic to thiocarbonyl compounds, electron-withdrawing groups were attached to the 4H-pyran-4-thione core to further lower the excited state energies. The resulting mini-phosphors were doped into suitable polymer matrices. These purely organic, amorphous materials emitted near-infrared (NIR) RTP. Having a molar mass of only 162 g·mol-1, one of the phosphors emitted RTP that peaked at 750 nm, with a very large Stokes shift of 15485 cm-1 (403 nm). Thanks to the good processability of the polymer film, light-emitting diodes (LEDs) with NIR emission were easily fabricated by coating doped polymer on ultraviolet LEDs. This work provides an intriguing strategy to achieve NIR RTP using compact luminophores.

Near‐Infrared Room‐Temperature Phosphorescence from Monocyclic Luminophores

Compact luminophores with long emission wavelengths have aroused considerable theoretical and practical interest. Organics with room‐temperature phosphorescence (RTP) are also desirable for their longer lifetimes and larger Stokes shifts than fluorescence. Utilizing the low electronic transition energy intrinsic to thiocarbonyl compounds, electron‐withdrawing groups were attached to the 4H‐pyran‐4‐thione core to further lower the excited state energies. The resulting mini‐phosphors were doped into suitable polymer matrices. These purely organic, amorphous materials emitted near‐infrared (NIR) RTP. Having a molar mass of only 162 g·mol‐1, one of the phosphors emitted RTP that peaked at 750 nm, with a very large Stokes shift of 15485 cm‐1 (403 nm). Thanks to the good processability of the polymer film, light‐emitting diodes (LEDs) with NIR emission were easily fabricated by coating doped polymer on ultraviolet LEDs. This work provides an intriguing strategy to achieve NIR RTP using compact luminophores.

Exploring the influence of sudan IV Azo dye on the structural, optical, and dispersion characteristics of PVA/Su-IV composites

Flexible polymeric film composites consisting of polyvinyl alcohol (PVA) and Sudan IV azo dye (Su-IV) were synthesized using a casting method. Despite the known optical properties of PVA and azo dyes individually, the combined effects of Su-IV doping in PVA on the material’s optical and nonlinear optical properties have not been thoroughly investigated. This study addresses this gap by exploring the interactions between PVA and Su-IV at various doping concentrations (0.1–0.8 wt%) and their subsequent impact on the material’s structural and optical characteristics. Fourier transform infrared (FTIR) spectroscopy was employed to identify distinct vibrational groups within the composites, revealing that the incorporation of Su-IV induced random deviations in most absorption intensities compared to pristine PVA. Notably, new peaks at 519 and 444 cm−1 emerged, intensifying with increasing Su-IV concentrations, indicating significant interactions between the composite constituents. The optical properties were analyzed through transmittance and reflectance measurements, which uncovered new absorption peaks at 518 and 357 nm in PVA/Su-IV composites. These peaks correspond to electronic energy transitions of 2.4 and 3.6 eV, respectively, and their intensities increased with higher Su-IV content. Additionally, the indirect and direct bandgaps were decreased as Su-IV concentrations increased. The refractive index (n) analysis showed typical dispersion behavior between 850 and 2500 nm, aligning with the Wemple-DiDomenico (WDD) model. Furthermore, the oscillator parameters were calculated. Also, the nonlinear optical susceptibility (χ(3)) was boosted from 4.19 × 10−6 for pure PVA to 3.60 × 10−4 for the sample with 0.8 wt% Su-IV. The nonlinear refractive index (n2) was also measured at 8.55 × 10−2 for the doped sample. These findings demonstrate the potential of PVA/Su-IV composites for applications in nonlinear optics and photonics.

The stability, electronic and optical properties of nonmetal doped g-GaN: A first-principles calculation

Doping is an effective strategy to modulate the electronic performance of materials by forming new chemical bonds and relaxing the neighboring bonds, which may change catalytic performance of materials. Herein, we demonstrate the effects of a series of nonmetal (NM) dopants on the electronic properties and photocatalytic activity of g-GaN monolayer using first-principle calculations. NM dopants prefer to substitute N atom under Ga-rich condition. C, O and F doped specimens are highly stable under both Ga-rich and N-rich conditions. NM dopants induce the generation of impurity levels, contributing to reduce the electronic transition energies. S, Se and Te doped specimens increase by about 11, 8 and 4 times for absorption intensity in the region of visible light, respectively. Remarkably, S, Cl, Se, Br, Te and I dopants can effectively decrease the recombination rate of photogenerated electrons and holes of the g-GaN in photocatalytic reaction. H, B, C Si, P and As doped system can induce more active sites. Remarkably, halogen dopants could increase the both redox and reduction ability of g-GaN monolayer. Thus, NM dopants can effectively tune redox potential of g-GaN monolayer and improve its photocatalytic performance.

PAFerroptosis Combined with Metabolic Disturbance of Mito by p52-ZER6 for Enhanced Cancer Immunotherapy induced by Nano-Bacilliform-Enzyme.

The confused gene expressions and molecular mechanisms for mitochondrial dysfunction of traditional nanoenzymes is a challenge for tumor therapy. Herein, a nano-bacilliform-enzyme obtains the ability to inhibit p52-ZER6 signal pathway, regulate the genes related to mitochondrial metabolism, and possess the GOx/CAT/POD-like property. NBE acquires catalytic activity from the electronic energy transition. The tannin of NBE as a mitochondrial (Mito)-targeting guide overloads MitoROS, and then metabolic disorder and lipid peroxidation of Mito membrane occurs, thus leading to a novel death pathway called PAFerroptosis (pyroptosis, apoptosis, and Ferroptosis). Simultaneously, in order to refrain from mitophagy, hydroxychloroquine is mixed with NBE to form a combo with strength pyroptosis. As a result, NBE/combo improves the PAFerroptosis obviously by activation of CD8+T cells and inactivation of MDSC cells, up-regulating expression of caspase-3 signal pathway, intercepting DHODH pathway to arrive excellent antitumor effect (93%). Therefore, this study establishes a rational nanoenzyme for mitochondrial dysfunction without mitophagy for effective antitumor therapy.

The Photophysics and Photochemistry of Phenylalanine, Tyrosine, and Tryptophan: A CASSCF/CASPT2 Study.

Among all amino acids, the three aromatic systems including phenylalanine, tyrosine, and tryptophan are known to manifest UV light absorption at the higher wavelengths. Their fluorescent properties are important for protein detection and determination of the spatial structure. Based on ab initio quantum chemical calculations, the absorption spectra in the 0-12 eV UV range of these aromatic amino acids were interpreted, and the photochemistry of the lowest-lying excited states was studied. For that, molecular ground-state geometries were determined using both the coupled-cluster single and double (CCSD) and complete active space self-consistent field (CASSCF) methods. The vertical electronic transition energies, associated oscillator strengths, and electric dipole moments of the lowest excited states were computed at the CASPT2//CASSCF level. The decay mechanisms of the lowest-energy excited states were investigated by performing minimum energy path (MEPs) computations. The results showed that the CCSD and CASSCF computations yielded similar structures. The lowest-energy S1 state in phenylalanine and tyrosine, and S1 and S2 in tryptophan are mainly described by the π → π* excitation localized in the aromatic ring. Upon light absorption, the main photoresponse of the molecules is driven by the benzene, phenol, and indole chromophoric units.

Improving Photophysical Properties of Deazaflavin Derivatives by Acrylaldehyde Bridging: A Theoretical Investigation

AbstractThe electronic structure and photophysical properties of several acrylaldehyde‐bridged deazaflavin derivatives (cFLs) were investigated theoretically. The impact of acrylaldehyde bridging on photophysical properties of deazaflavin (cFL) is strongly site‐dependent. Specifically, the change of adiabatic energy of electronic transitions(ΔEad) and vibronic coupling promote fluorescent emission to be comparable to internal conversion of cFL and cFL4 (both C5−C6 and C9−N10 bridged, but C9−N10 bridged by propene), turning them eligible as fluorescent sensors. As El‐Sayed's rule is satisfied in cFL1(C5−C6 bridged), cFL2(C9−N10 bridged) and cFL3(both C5−C6 and C9−N10 bridged), intersystem crossing from first singlet excited state to triplet excited states (Tn) become dominant and the evolution of excited cFLs from T1 appears vital. The rate constants of photophysical processes indicate these cFLs are of dominantly high steady state T1 concentration and are potential triplet sensitizers. We expect the findings would pave the way for rational design of novel cFLs with extraordinary photophysical properties.

Fighting poison with poison: Degradation of ethyl paraben by Bi2Ti2O7-TiO2 doped with ethyl paraben

In this paper, a variety of titanium-bismuth-based composite photocatalysts were prepared by molecularly imprinted sol–gel method using ethyl paraben (EP) as the target pollutant and tetra-n-butyl titanate as the precursor for the degradation of EP. The photocatalytic removal of 81.4 % of 10 mg/L EP wastewater was achieved by synthesising Bi-EP-TiO2 for 30 min at 500°C, 5 g Bi and 2 g EP. The main component of the prepared Bi-EP-TiO2 and Bi-TiO2 is Bi2Ti2O7-TiO2. In addition, the forbidden bandwidth of Bi-EP-TiO2 is 0.28 eV larger than that of Bi-TiO2 but 0.30 eV smaller than that of TiO2, which suggests that, compared with TiO2, Bi-EP-TiO2 requires a lower electron-leap energy, which is capable of generating more. This suggests that Bi-EP-TiO2 requires lower electron transition energy than TiO2, and therefore can generate more photogenerated electron holes, thus improving the catalytic efficiency. Hence, Bi2Ti2O7-TiO2 doped with ethyl paraben degrades EP with excellent performance.

Reconciling mean-squared radius differences in the silver chain through improved measurement and ab initio calculations

Nuclear charge radius differences in the silver isotopic chain have been reported through different combinations of experiment and theory, exhibiting a tension of two combined standard errors. This study investigates this issue by combining high-accuracy calculations for six low-lying states of atomic silver with an improved measurement of the 5s2S1/2−5p2P3/2 transition optical isotope shift. Our calculations predict measured electronic transition energies in Ag at the 0.3% level, the highest accuracy achieved in this system so far. We calculate electronic isotope shift factors by employing analytical response relativistic coupled-cluster theory and find that a consistent charge radius difference between Ag107,109 is returned when combining our calculations with the available optical isotope shift measurements. We therefore recommend an improved value for the mean-squared charge radius difference between Ag107 and Ag109 as 0.207(6) fm2, within one combined error from the value derived from muonic Ag experiments, and an updated set of charge radii differences across the isotopic chain. Published by the American Physical Society 2024

Unravelling structural features of small molecules for photochemical transformation of environmental contaminants

Small molecules, including natural metabolites, organic matter decomposition products, and engineered oxidation byproducts, are widespread in aquatic environment. However, the limited understanding of the photochemical interactions of these small molecules with water pollutants hampers the development of effective environmental protection strategies. This study explores the structural features governing the photochemical transformation of toxic oxyanions by α- and β-dicarbonyl compounds. By integrating experimental observations with quantum chemical calculations, a robust correlation network was constructed. The correlation network reveals that the reactivity of small organic molecules with oxyanions could be quantitively predicted by their intrinsic properties, such as electronic transition energy, bond dissociation energy, molecular softness, molecular orbital gap, atomic charge, and molecular surface local ionization energy. This network maps the relationship between the molecular architecture of chemicals and their photochemical behaviors. This perspective offers fresh insights into the photochemical behaviors of small molecules in diverse environmental and chemical contexts and are helpful for developing advanced water treatment strategies toward a sustainable future.

Nuclear deformation effects in the spectra of highly charged ions

With the increasing precision of spectroscopic measurements, there is a growing demand for more accurate theoretical predictions, which requires the estimation of various higher-order effects, such as the nuclear deformation effect. Here, we present the results for nuclear deformation correction for the widest range of nuclei. The effects are investigated in terms of electronic transition energies, g factors, and hyperfine splitting constants, by implementing the deformed Fermi nuclear model to the Dirac equation. Based on the improved methodology and appropriate data classification, we present the results for over 1100 nuclei on figures, showing the general trends and anomalies. Moreover, it can serve as a simple tool providing estimations for specific planned research. In addition, we examine the connections and significance of deformation effects in the search of new physics with singly charged ions. Published by the American Physical Society 2024

Stacking Faults Enabled Second Harmonic Generation in Centrosymmetric van der Waals RhI3.

Second harmonic generation (SHG) in van der Waals (vdW) materials has garnered significant attention due to its potential for integrated nonlinear optical and optoelectronic applications. Stacking faults in vdW materials are a typical kind of planar defect that introduces a degree of freedom to modulate the crystal symmetry and resultant SHG response. However, the physical origin and tunability of stacking-fault-governed SHG in vdW materials remain unclear. Here, taking the intrinsically centrosymmetric vdW RhI3 as an example, we theoretically reveal the origin of stacking-fault-governed SHG response, where the SHG response comes from the energetically favorable AC̅ stacking fault of which the electrical transitions along the high-symmetry paths Γ-M and Γ-K in the Brillion zone play the dominant role at 810 nm. Such a stacking-fault-governed SHG response is further confirmed via structural characterizations and SHG measurements. Furthermore, by applying hydrostatic pressure on RhI3, the correlation between structural evolution and SHG response is revealed with SHG enhancement up to 6.9 times, where the decreased electronic transition energies and higher momentum matrix elements due to the stronger interlayer interactions upon compression magnify the SHG susceptibility. This study develops a promising foundation for nonlinear nano-optics applications through the strategic design of stacking faults.

Excited States in Single-Stranded and i-Motif DNA with Silver Ions.

We have studied the excited states and structural properties for the complexes of cytosine (dC)10 chains with silver ions (Ag+) in a wide range of the Ag+ to DNA ratio (r) and pH conditions using circular dichroism, steady-state absorption, and fluorescence spectroscopy along with the ultrafast fluorescence upconversion technique. We also calculated vertical electronic transition energies and determined the nature of the corresponding excited states in some models of the cytosine-Ag+ complexes. We show that (dC)10 chains in the presence of silver ions form a duplex stabilized by C-Ag+-C bonds. It is also shown that the i-motif structure formed by (dC)10 chains is destabilized in the presence of Ag+ ions. The excited-state properties in the studied complexes depend on the amount of binding ions and the binding sites, which is supported by the calculations. In particular, new low-lying excited states appear when the second Ag+ ion interacts with the O atom of cytosine in the C-Ag+-C pairs. A similar picture is observed in the case when one Ag+ ion interacts with one cytosine via the N7 atom.

Dynamic strain coupling driven by structural phase transition in mixed-dimensional 2H-MoS2/VO2 van der Waals heterointerfaces

Mixed-dimensional van der Waals (vdW) heterostructures, integrated two-dimensional (2D) atomic crystals with three-dimensional (3D) functional materials, offer a powerful means to manipulating physical properties and generating unprecedented functionalities. Understanding interfacial couplings at those hetero (homo)-interfaces is indispensable for exploring new optical and electronic devices. Herein, we investigated dynamically phase-transition-driven strain coupling across a vdW heterointerface through integrating 2D layered 2H-MoS2 nanoflakes onto 3D phase-change VO2 epitaxial thin films. The Raman peak positions of the in-plane and out-of-plane vibration modes E2g1 and A1g from the 2H-MoS2 nanoflakes show a phonon softening and reversible hysteresis loop as a function of temperature in this mixed-dimensional vdW 2H-MoS2/(1¯11)-VO2/(11¯02)-Al2O3 heterostructure, originating from the co-action of temperature-dependent anharmonicity in 2H-MoS2 and reversible structural phase transition (SPT)-induced in-plane tensile strain from the VO2 thin film. Accordingly, the integrated Raman scattering intensity of these two feature peaks of the 2H-MoS2 nanoflakes increased (decreased) as the temperature increased (decreased), exhibiting a hysteresis loop in the SPT and metal–insulator transition region of VO2. Additionally, the peak integrated intensity enhancement ratio of the E2g1 and A1g vibration modes was approximately 2.3 and 2.8, respectively. These results indicate that the dynamically SPT-driven in-plane tensile strain from the bottom VO2 layer interfacially couples with the adjacent 2H-MoS2 nanoflakes and results in a reduction in the electronic transition energy, leading to an enhancement in the Raman scattering intensity of 2H-MoS2. Our work holds promise for dynamic strain control of lattice dynamics and electron–phonon interaction of 2D materials for functional electronic and photoelectronic devices.