Electron Donor-acceptor Research Articles

Visible-Light-Promoted C3-Sulfenylindoles with Arylsulfonyl Chlorides via Electron Donor-Acceptor Complex.

In this study, we present an efficient approach for the synthesis of 3-sulfenyl indoles through an electron donor-acceptor (EDA) complex-promoted photoreaction. This sulfenylation reaction leverages sulfonyl chlorides as the sulfur source and employs PPh3 as the reductant without the need for any transition-metal catalyst or photocatalyst. At the same time, the relaxation process of the excited EDA complex was theoretically investigated at the method and multiconfiguration second-order perturbation//complete active space self-consistent field/PCM level of theory, which involves the π bond of indoles injecting an electron to the antibonding orbital of the S-Cl bond in arylsulfonyl chlorides.

A novel design of copper selenide/zinc selenide/Nitrogen-doped carbon derived from MOF for sulfadiazine adsorption: Performance and mechanism

Herein, a novel copper selenide/zinc selenide/Nitrogen-doped carbon (Cu2Se/ZnSe/NC) sphere was constructed via a combination of cation exchange, selenization and carbonization approaches with zinc-based metal–organic frameworks (ZIF-8) as precursor for sulfadiazine (SDZ) removal. Compared with the ZnSe/NC, the defective Cu2Se/ZnSe interface in the optimizing Cu-ZnSe/NC2 sample caused a remarkably improved adsorption performance. Notably, the adsorption capacity of 129.32 mg/g was better than that of mostly reported adsorbents for SDZ. And the adsorption referred to multiple-layer physical–chemical process that was spontaneous and exothermic. Besides, the Cu-ZnSe/NC2 displayed fast adsorption equilibrium of about 20 min and significant anti-interference ability for inorganic ions. Specially, the adsorbent possessed excellent stability and reusability, which could also be applied for rhodamine B (RhB), methylene blue (MB), and methyl orange (MO) dyes removal. Ultimately, the charge redistribution of Cu2Se/ZnSe interface greatly contributes the superior adsorption performance for SDZ, in which electrostatic attraction occupied extremely crucial status as compared to π-π electron-donor–acceptor (π-π EDA) interaction and hydrogen bonding (H-bonding), as revealed by the density function theory (DFT) calculations and experimental results. This study can provide a guideline for design of high-efficient adsorbent with interfacial charge redistribution.

Photoreduction of Trifluoromethyl Group: Lithium Ion Assisted Fluoride-Coupled Electron Transfer from EDA Complex.

Photoinduced single-electron reduction is an efficient method for the mono-selective activation of the C-F bond on a trifluoromethyl group to construct a difluoroalkyl group. We have developed an electron-donor-acceptor (EDA) complex mediated single-electron transfer (EDA-SET) of α,α,α-trifluoromethyl arenes in the presence of lithium salt to give α,α-difluoroalkylarenes. The C-F bond reduction was realized by lithium iodide and triethylamine, two common feedstock reagents. Mechanistic studies revealed the generation of a α,α-difluoromethyl radical by single-electron reduction and defluorination, followed by the radical addition to alkenes. Lithium salt interacted with the fluorine atom to promote the photoinduced reduction mediated by the EDA complex. Computational studies indicated that the lithium-assisted defluorination and the single-electron reduction occurred concertedly. We call this phenomenon fluoride-coupled electron transfer (FCET). FCET is a novel approach to C-F bond activation for the synthesis of organofluorine compounds.

Adsorption dynamics of per- and polyfluoroalkyl substances (PFAS) on activated carbon: Interplay of surface chemistry and PFAS structural properties

Using activated carbon (AC) to adsorb per- and polyfluoroalkyl substances (PFAS) is highly practical for environmental remediation. However, examining the surface chemistry of carbonaceous material with regard to the removal of various PFAS has been limited, as the focus has often solely been on perfluorooctanoic acid and perfluorooctane sulfonic acid. Consequently, this study systematically explores the role of AC surface chemistry in the adsorption of PFAS with various structural properties using ACs that have been modified for different degrees of acidity, basicity, and hydrophobicity. Batch adsorption studies have demonstrated that the affinity of PFAS for the AC surface is negatively correlated with surface acidity. The removal performance at an adsorbent dose of 2 mg/L and an initial PFAS concentration of 600 ng/L is 27.4–91.4 %, 57.2–95.6 %, 92.4–99.2 %, and 89.1–99.6 % for an AC with an acidic surface, unmodified AC, defunctionalized AC, and AC with basic surface, respectively. Analyses of the adsorption isotherms, kinetics, and removal performance of the four types of ACs and 14 PFAS in water at different pH and ionic strengths reveal that hydrophobic, electron donor–acceptor, and electrostatic interactions, as well as negative charge-assisted hydrogen bond formation are necessary to describe the key adsorption characteristics observed in the experiments. The relative significance of the adsorption mechanisms depends on the PFAS structural properties, AC surface chemistry, and water composition. This extensive discourse contributes substantially to the design of an efficient carbonaceous adsorbent with specific surface moieties for removing PFAS from water.

Preparation of imprinted phenol gel with ultra-high adsorption capacity based on porous biochar: 5-stage tandem column, response surface method, and mechanism analysis

Wastewater from industries like petroleum refining and pharmaceuticals contains high levels of phenolic compounds. Discharging this untreated wastewater can severely pollute water bodies. To address this issue, a biochar-based composite imprinting phenol gel(MgNBC@MIP) was designed to effectively remove phenolic compounds and control phenol levels in water environments. The adjustment of the aromatic structure and pore architecture of the biochar effectively enhanced its affinity for phenolic compounds. Subsequently, the individual effects of factors such as pH, salt, and humic acid on adsorption were explored. Optimization of the adsorption process was carried out using a four-factor, three-level response surface method, yielding a theoretical formula for the adsorption amount, with a maximum adsorption capacity of 308.311 mg/g. Moreover, the adsorption of phenol and its derivatives by MgNBC@MIP followed the Langmuir isothermal model and the PSO kinetic model. A comprehensive mechanism analysis elaborated in detail on the diffusion and adsorption process of phenol from the aqueous phase to the adsorption site. Correlation FTIR and XPS analysis confirmed that π-π electron donor–acceptor interactions, hydrogen bonding, pore filling, and metal complexation were the primary driving forces for phenol adsorption. Significantly, MgNBC@MIP exhibited good reusability in the adsorption–desorption cycle. The design of a five-stage tandem column adsorption experiment opens up avenues for the industrial application of MgNBC@MIP.

Visible-Light-Induced C-H Cyanoalkylation of Azauracils with Cycloketone Oxime Esters via Catalytic EDA Complex.

Photoexcitation electron donor-acceptor (EDA) complexes provide an effective approach to produce radicals under mild conditions, while the catalytic version of EDA complex photoactivation remains scarce. Herein, we report a visible-light-induced organophotocatalytic pathway for the cyanoalkylation of azauracils using inexpensive and readily available 1,4-diazabicyclo[2.2.2]octane (DABCO) as a catalytic electron donor. This synthetic method exhibits exceptional compatibility with various functional groups and presents 34 examples in high yields. The efficient cyanoalkylation offers an environmentally friendly and sustainable route toward enhancing the structural and functional diversity of azauracils.

Fluorosulfonyl Arylation of Alkynes via Electron Donor-Acceptor Photoactivation.

A radical fluorosulfonyl arylation of alkynes with sulfuryl chlorofluoride as the FSO2 radical precursor via electron donor-acceptor photoactivation driven by daylight or a blue light-emitting diode is disclosed. A series of valuable benzo-fused carbocycles and heterocycles have been produced with simple operation under mild conditions in the absence of any external catalysts or additives. The synthetic potential of this protocol has further demonstrated excellent scalability, as well as diverse postderivatizations, including SuFEx reactions and other useful cascade reactions.

Photodecarboxylative Radical Cascade Involving N-(Acyloxy)phthalimides for the Synthesis of Pyrazolones.

We disclose N'-arylidene-N-acryloyltosylhydrazides as novel skeletons for the synthesis of biologically relevant alkylated pyrazolones through a photoinduced radical cascade with N-(acyloxy)pthalimides as readily available alkyl surrogates. The reaction proceeds through the formation of a photoactivated electron donor-acceptor (EDA) complex between alkyl N-(acyloxy)phthalimide (NHPI) esters and LiI/PPh3 as a commercially available donor system. The reaction exhibits a broad scope and scalability, thereby enabling synthesis of a broad spectrum of functionally orchestrated alkylated pyrazolones under mild and transition-metal-free conditions.

Electron Donor-Acceptor Complex Driven Photocatalyst-Free Trifluoromethylation of Heterocycles.

Heterocyclic trifluoromethylation is efficiently initiated through a photochemical reaction utilizing an electron donor-acceptor (EDA) complex, proceeding smoothly without the use of photocatalysts, transition-metal catalysts, or additional oxidants. This method has been optimized through extensive experimentation, demonstrating its versatility and efficacy across various substrates, including quinoxalinones, coumarins, and indolones. Notably, this approach enables the practical synthesis of trifluoromethylated quinoxalinones on a gram scale. Mechanistic investigations that incorporate radical trapping and ultraviolet/visible spectroscopy, confirmed the formation of the an EDA complex and elucidated the reaction pathways. This study highlights the crucial role of EDA photoactivation in trifluoromethylation, significantly expanding the application scope of EDA complexes in chemical synthesis.

Tuning photovoltaic parameters in polymer solar cells through side-chain modification of donor polymer based on cyclopenta[c]thiophene-4,6(5H)-dione

Conjugated polymers were developed by using thiophene-dione derivatives named DEHOB-BDTF and DBOOB-BDTF. The polymers have a combination of electron donor (D) and electron acceptor (A), in which 5-(3,4-bis(((2-ethylhexyl)oxy)benzylidene)-1,3-dibromo-4H-cyclopenta[c]thiophene-4,6(5H)-dione (DEHOB) or 5-(3,4-bis((2-butyloctyl)oxy)benzylidene)-1,3-dibromo-4H-cyclopenta[c]thiophene-4,6(5H)-dione (DBOOB) serves as the electron acceptor units. The alkoxy chain shows strong electron-donating properties due to conjugation effects while longer alkoxy chain increases the solubility. Non-fullerene PSCs are fabricated with an ITO/ZnO/polymer: Y6BO/MoO3/Ag structure in which Y6BO is used as an electron acceptor. The performance of the device by using DEHOB-BDTF is accomplished up to 8.49 % (an open-circuit voltage of 0.85 V and a short-circuit current density of 20.1 mA/cm2). Furthermore, the longer alkoxy chain length enhances solubility making a well-ordering in DBOOB and reaching the fill factor of 54.2 %, due to the extended alkoxy chain can improve the miscibility in the blend.

Engineering of 3D architectures with yttrium on reduced-graphene oxide nanosheets for effective co-adsorption of tetracycline and phosphate

Effective removal of composite pollutants containing antibiotic and phosphorus is still facing challenges for the wastewater treatment. In this study, yttrium-hydroxide component was loaded onto the surface of reduced GO nanosheets via low-temperature hydrothermal method, to synthesize the 3D YrGO architectures. The optimized YrGO-8 hydrogels showed the maximum adsorption capacity of 226.45 mg/g for tetracycline (TC), and 33.403 mg/g for phosphate, which was higher than many other reported adsorbents. The characterization results demonstrated that the rGO nanosheets were successfully crosslinked by Y(III) to form a porous 3D structure, which was beneficial to the mass transfer and active sites exposure. The adsorption behaviors of TC or phosphate was suppressed by the co-existing phosphate ions or TC, with slower adsorption rate and lower adsorption amount. Importantly, column adsorption analyzed by Thomas model illustrated the rate basis of YrGO-8beads to capture TC/phosphate in an adsorbate diffusion rate. Moreover, the 3D YrGO-8 remained stable and high reusability in multi-uptake-release rounds via pH regulation. The mechanism study suggested that the sequence of adsorption process of TC followed the order of hydrogen bond (HB) > π – π electron donor–acceptor (EDA), n − π EDA > Y(III) bridging interactions, while the uptake of phosphate formed Y-O-P inner-sphere complexes prior to HB. This study proposes a novel insight into the development of 3D architectures for effectively simultaneous treatment of composite TC and phosphate pollution.

Donor-acceptor covalent organic framework/ZnIn2S4 core-shell structure S-scheme heterostructure for efficient photocatalytic hydrogen evolution

Covalent organic frameworks (COFs) show promising prospect as the photocatalysts with advantages of exceptional light adsorption capability, large specific surface area, and adjustable band structure. However, COFs usually suffer from severe recombination of photogenerated carriers. Therefore, there is an urgent demand to design effective COF-based heterostructures to enhance the separation of carriers. In this work, a porphyrin-based COF with electron donor-acceptor structure is synthesized via condensation polymerization by using 5,10,15,20-tetrakis(4-aminophenyl)porphyrin (TAPPP) and N,N,N',N'-tetra(4-formylphenyl)benzidin (NFPBD) as the donor and acceptor, respectively. Subsequently, ZnIn2S4 (ZIS) are successfully in-situ grown on the surface of porphyrin-based COF, forming a novel core-shell structure. The in-situ synthesized ZIS with positive charges can be easily adsorbed on the negatively charged sites of the COF’s surface via the electrostatic interaction. This organic/inorganic hybrid COF-ZIS heterostructure exhibits a superior photocatalytic hydrogen evolution (PHE) rate of 695 μmol g−1 h−1, approximately three times higher than that of ZIS. The construction of COF-ZIS heterostructure plays an important role in enhancing the separation and transport of photogenerated carriers, which provides more electrons at the surface of ZIS to take part in proton reduction. Electron paramagnetic resonance spectra confirm the charge carriers transfer mode in the COF-ZIS heterostructure via an S-scheme mechanism. Moreover, upon loading Pt as the cocatalyst, the heterostructure achieves an effective PHE rate of 2711 μmol g−1 h−1 along with an exceptional stability. Additionally, the COF-ZIS heterostructure reaches up to 2.45% of apparent quantum efficiency at 400 nm. Notably, the average lifetime of the COF-ZIS heterostructure increases by 43.2% and 98.9% compared to that of ZIS and the COF individually, as observed through single-particle fluorescence spectroscopy. This work gives valuable inspiration into the building of donor-acceptor COF-based S-scheme heterostructures to achieve highly effective green energy conversion by aligning band structures.

Perfluoroalkylation of Triarylamines by EDA Complexes and Ulterior Sensitized [6π]-Electrocyclization to Perfluoroalkylated Endo-Carbazoles. Mechanistic and Photophysical Studies.

Blue LEDs-irradiation of a mixture of N,N,N',N'-tetramethylethylenediamine (TMEDA) and perfluoroalkyl iodides (RF-I) - Electron Donor Acceptor (EDA)-complex - in the presence of triphenylamines (TPAs) in an aqueous solvent mixture afforded mono-perfluoroalkylated triphenylamines (RF-TPA) in good yields. These RF-TPA were further subjected to acetone-sensitized [6π]-electrocyclization at 315 nm-irradiation affording exclusively perfluoroalkylated endo-carbazole derivatives (RF-CBz) in quantitative yields. Mechanistic studies and photophysical properties of products are studied.

Engineering bifunctional sites in covalent polymers for boosting photocatalytic H2S oxidation

The development of catalyst for photocatalytic hydrogen sulfide (H2S) oxidation with excellent efficiency and regeneration properties is a significant challenge. Herein, the pyridine units as bifunctional sites are incorporated in covalent polymers (CPs) by CN coupling reaction, which exhibit photocatalytic H2S selective oxidation to sulfur conversion (95 %) under visible light in a continuous flow system, more than twice that of the pristine sample (40 %). Meanwhile, the photocatalytic H2S conversion rate had a linear function relationship with pyridinic N content, demonstrating the substantial role of pyridine in photocatalytic H2S oxidation process. According to experimental results, the pyridine unit not only acted as the structural base site to improve the H2S chemisorption, but also served as electron withdrawing unit to construct electron donor-acceptor (D-A) structure with benzene, which optimized the light absorption, charge separation and migration. In addition, series in-situ measurements and electron density difference simulations revealed the significant role of electron D-A structure in H2S adsorption and activation process. By exploring the effect of pyridine unit in CPs on H2S conversion process, this work provides a new idea for the subsequent study of photocatalytic H2S oxidation.

Photoinduced Site-Selective Aryl C-H Borylation with Electron-Donor-Acceptor Complex Derived from B2Pin2 and Isoquinoline.

Due to boron's metalloid properties, aromatic boron reagents are prevalent synthetic intermediates. The direct borylation of aryl C-H bonds for producing aromatic boron compounds offers an appealing, one-step solution. Despite significant advances in this field, achieving regioselective aryl C-H bond borylation using simple and readily available starting materials still remains a challenge. In this work, we attempted to enhance the reactivity of the electron-donor-acceptor (EDA) complex by selecting different bases to replace the organic base (NEt3) used in our previous research. To our delight, when using NH4HCO3 as the base, we have achieved a mild visible-light-mediated aromatic C-H bond borylation reaction with exceptional regioselectivity (rr > 40:1 to single isomers). Compared with our previous borylation methodologies, this protocol provides a more efficient and broader scope for aryl C-H bond borylation through the use of N-Bromosuccinimide. The protocol's good functional-group tolerance and excellent regioselectivity enable the functionalization of a variety of biologically relevant compounds and novel cascade transformations. Mechanistic experiments and theoretical calculations conducted in this study have indicated that, for certain arenes, the aryl C-H bond borylation might proceed through a new reaction mechanism, which involves the formation of a novel transient EDA complex.

Photodriven electron-transfer dynamics in a series of heteroleptic Cu(I)-anthraquinone dyads.

Solar fuels catalysis is a promising route to efficiently harvesting, storing, and utilizing abundant solar energy. To achieve this promise, however, molecular systems must be designed with sustainable components that can balance numerous photophysical and chemical processes. To that end, we report on the structural and photophysical characterization of a series of Cu(I)-anthraquinone-based electron donor-acceptor dyads. The dyads utilized a heteroleptic Cu(I) bis-diimine architecture with a copper(I) bis-phenanthroline chromophore donor and anthraquinone electron acceptor. We characterized the structures of the complexes using x-ray crystallography and density functional theory calculations and the photophysical properties via resonance Raman and optical transient absorption spectroscopy. The calculations and resonance Raman spectroscopy revealed that excitation of the Cu(I) metal-to-ligand charge-transfer (MLCT) transition transfers the electron to a delocalized ligand orbital. The optical transient absorption spectroscopy demonstrated that each dyad formed the oxidized copper-reduced anthraquinone charge-separated state. Unlike most Cu(I) bis-phenanthroline complexes where increasingly bulky substituents on the phenanthroline ligands lead to longer MLCT excited-state lifetimes, here, we observe a decrease in the long-lived charge-separated state lifetime with increasing steric bulk. The charge-separated state lifetimes were best explained in the context of electron-transfer theory rather than with the energy gap law, which is typical for MLCT excited states, despite the complete conjugation between the phenanthroline and anthraquinone moieties.

Photoinduced C(sp3)‐H Bicyclopentylation Enabled by an Electron Donor–Acceptor Complex‐Mediated Chemoselective Three‐Component Radical Relay

The photoredox electron donor–acceptor (EDA) complex‐mediated radical coupling reaction has gained prominence in the field of organic synthesis, finding widespread application in two‐component coupling reactions. However, EDA complex‐promoted multi‐component reactions are not well developed with only a limited number of examples have been reported. Herein, we report a photoinduced and EDA complex‐promoted highly chemoselective three‐component radical arylalkylation of [1.1.1]propellane, which allows the direct functionalization of C(sp3)–H with bicyclo[1.1.1]pentanes (BCP)‐aryl groups under mild conditions. A variety of unnatural α‐amino acids, featuring structurally diversified 1,3‐disubstituted BCP moieties, were synthesized in a single‐step process. Notably, leveraging the high tension release of [1.1.1]propellane, the highly unstable transient aryl radical undergoes rapid conversion into a relatively stable tertiary alkyl transient radical, and consequently, the competing side‐reaction of two‐component coupling was entirely suppressed. The strategic use of this transient radical conversion approach would be useful for the design of diverse EDA complex‐mediated multi‐component reactions. It is noteworthy that the highly chemoselective late‐stage incorporation of the 1,3‐disubstituted BCP pharmacophores into peptides was achieved both in liquid‐phase and solid‐phase reactions. This advancement is anticipated to have significant application potential in the future development of peptide drugs.

An Electron Donor-Acceptor Structured Rhenium(I) Complex Photo-Sensitizer Evokes Mutually Reinforcing "Closed-Loop" Ferroptosis and Immunotherapy.

The hypoxic microenvironment of solid tumors severely lowers the efficacy of oxygen-dependent photodynamic therapy (PDT). The development of hypoxia-tolerant photosensitizers for PDT is an urgent requirement. In this study, a novel rhenium complex (Re-TTPY) to develop a "closed-loop" therapy based on PDT-induced ferroptosis and immune therapy is reported. Due to its electron donor-acceptor (D-A) structure, Re-TTPY undergoes energy transfer and electron transfer processes under 550nm light irradiation and displays hypoxia-tolerant type I/II combined PDT capability, which can generate 1O2, O2 -, and ·OH simultaneously. Further, the reactive oxygen species (ROSs) leads to the depletion of 1,4-dihydronicotinamide adenine dinucleotide (NADH), glutathione peroxidase 4 (GPX4), and glutathione (GSH). As a result, ferroptosis occurs in cells, simultaneously triggers immunogenic cell death (ICD), and promotes the maturation of dendritic cells (DCs) and infiltration of T cells. The release of interferon-γ (IFN-γ) by CD8+ T cells downregulates the expression of GPX4, further enhancing the occurrence of ferroptosis, and thereby, forming a mutually reinforcing "closed-loop" therapeutic approach.

Metal-Free Electron Donor-Acceptor Pair Enabled Long-Term Stability of Li-CO2 Battery.

The challenges of Lithium-carbon dioxide (Li-CO2) batteries for ensuring long-term cycling stability arise from the thermodynamically stable and electrically insulating discharge products (e.g., Li2CO3), which primarily rely on their interaction with the active materials. To achieve the optimized intermediates, the bifunctional electron donor-acceptor (D-A) pairs are proposed in cathode design to adjust such interactions in the case of B-O pairs. The inclusion of BC2O sites allows for the optimized redistribution of electrons via p-π conjugation. The as-obtained DO-AB pairs endow the enhanced interactions with Li+, CO2, and various intermediates, accompanied by the adjustable growth mode of Li2CO3. The shift from solvation-mediated mode into surface absorption mode in turn manipulates the morphology and decomposition kinetics of Li2CO3. Therefore, the corresponding Li-CO2 battery got twofold improved in both the capacity and reversibility. The cycling prolongs exceed 1300h and well operates at a wide temperature range (20-50°C) and different folding angles (0-180°). Such a strategy of introducing electron donor-acceptor pairs provides a distinct direction to optimize the lifetime of Li-CO2 battery from local structure regulation at the atomic scale, further inspiring in-depth understandings for developing electrochemical energy storage and carbon capture technologies.

Synthesis and Characterization of Zn-Salophen Complexes with Different D–A Distances: An Approach to Tuning the Intersystem-Crossing Process

A series of novel zinc-salophen (salophen = N, N′-phenylenebis(salicylimine)) complexes (Zn-1–4) with electron donor–acceptor (D–A) structure were synthesized and characterized using a triphenylamine structure as the electron donor. Zn-salophen complexes with the same substituent sites have been reported to exhibit significant CT properties. The design of the D–A structure and the increase in the number of benzene rings to increase the length of bridging groups have led to a reduction in the energy difference between charge separation singlet and triplet states, resulting in the production of reactive oxygen species (ROS) under light irradiation. The ability has been enhanced (in terms of the production of singlet oxygen (1O2), compared with Zn-salophen, Zn-4 is 1.58 times higher). This method has been reported to enhance the intersystem crossing process of compounds, thereby enabling them to reach a triple excited state, but the generation of ROS has not been studied. Although the enhancement is not very significant, it has expanded the medical application prospects of these types of complexes and has provided a new strategy to enhance the production of ROS.