Electron-accepting Unit Research Articles

Homoconjugation and Intramolecular Charge Transfer in Extended Aromatic Triptycenes with Different π-Planes.

Homoconjugation and intramolecular "through-space" charge transfers are molecular phenomena that have been studied since the 1960s. A detailed understanding and control of these effects would provide a tool to tune the optoelectronic properties of organic molecules in respect of the necessities for applications such as for organic electronics. Triptycene is a perfect candidate to investigate homoconjugation effects due to its three-dimensional alignment of three aromatic phenylene units, separated by two methine bridges. Here, a series of 16 π-extended triptycenes with up to three different permuted electron-accepting units and an electron-rich veratrole unit are studied in detail by UV/vis spectroscopy and cyclovoltammetry in combination with DFT calculations to get a deeper understanding of homoconjugation and charge-transfer processes of triptycenes. Furthermore, the gained knowledge can be exploited to construct triptycene-based electron acceptors with fine-tuned adjustment of electronic properties, such as electron affinities, by thorough choice of the aromatic blades that interact through homoconjugation.

Structure evolution from D-A-D type small molecule toward D-A-D-A-D type oligomer for high-efficiency photovoltaic donor materials

In order to study the influence of structure evolution on properties, a D-A-D-A-D-type oligomer of 5BDTBDD and its D-A-D type small molecule of 3BDTBDD were designed and synthesized, which consist of electron-accepting (A) unit of benzo [1,2-c:4,5-c'] dithiophene-4,8-dione (BDD) and electron-donating (D) unit of 4,8-di (6-ethylhexylthiophen-2-yl)benzo [1,2-b:4,5-b']dithiophene (BDT). The effect of structure evolution on crystallinity, absorption, mobility, morphology and photovoltaic properties was primarily investigated. It is found that, by simply inserting a D-A repeat unit, 5BDTBDD shows more improved crystallization, absorption, mobility and morphology than 3BDTBDD. As a result, 5BDTBDD exhibits better photovoltaic properties than 3BDTBDD in their non-fullerene organic solar cells using 9-bis(2-methylene-(3-(1,1-dicyanomethylene)-indanone))-5,5,11,11-tetrakis (4-hexylphenyl)-di thieno [2,3-d:2′,3′-d']-s-indaceno [1,2-b:5,6-b'] dithiophene (ITIC) as acceptor material. An increasing power conversion efficiency of 7.89% is obtained in the 5BDTBDD:ITIC cells, which is 1.8 times higher than that value (4.33%) in the 3BDTBDD:ITIC cells. It indicates that structure evolution from D-A-D type small molecule toward D-A-D-A-D type oligomer is an efficient strategy to achieve high-efficiency donor materials in organic solar cells.

A Simple and Strong Electron-Deficient 5,6-Dicyano[2,1,3]benzothiadiazole-Cored Donor-Acceptor-Donor Compound for Efficient Near Infrared Thermally Activated Delayed Fluorescence.

Despite the success of thermally activated delayed fluorescent (TADF) materials in steering the next generation of organic light-emitting diodes (OLEDs), effective near infrared (NIR) TADF emitters are still very rare. Here, we present a simple and extremely high electron-deficient compound, 5,6-dicyano[2,1,3]benzothiadiazole (CNBz), as a strong electron-accepting unit to develop a sufficiently strong donor-acceptor (D-A) interaction for NIR emission. End-capping with the electron-donating triphenylamine (TPA) unit created an effective D-A-D type system, giving rise to an efficient NIR TADF emissive molecule (λem =750 nm) with a very small ΔEST of 0.06 eV. The electroluminescent device using this NIR TADF emitter exhibited an excellent performance with a high maximum radiance of 10020 mW Sr-1 m-2 , a maximum EQE of 6.57% and a peak wavelength of 712 nm.

High-performance polymer solar cells based on terpolymer composed of one donor and two acceptors processed with non-halogenated solvent

Abstract Terpolymers consisting of three monomers with one electron donor unit and two electron acceptor units are promising p-type polymers for polymer solar cells (PSCs) because the incorporation of a third monomer into a copolymer backbone provides synergetic effect on physical properties such as absorption ability, charge transport, and photovoltaic performance. Currently, novel p-type terpolymers need to be developed for high-efficiency PSCs, which can be processed with eco-friendly non-halogenated solvents. In this study, a new series of terpolymers composed of 4,8-di(2,3-didecylthiophen-5-yl)-benzo[1,2-b:4,5-b′]dithiophene (BDT), 4,7-di(thien-2-yl)-5,6-difluoro-2,1,3-benzothiadiazole (DTffBT), and benzo[1,2-c:4,5-c′]dithiophene-4,8-dione (BDD) segments was synthesized and characterized for high-performance PSCs processed with non-halogenated solvents. PBDTBD terpolymers (i.e., PBDTBD-25, PBDTBD-50, and PBDTBD-75) were synthesized by adjusting different ratios of DTffBT to BDD segment (25%, 50%, and 75% of DTffBT). PBDTBD terpolymers exhibited excellent solubility in non-halogenated solvents. The optical, electrochemical, and morphological properties of PBDTBD terpolymers were successfully controlled by modulating the molar ratio of DTffBT and BDD. Moreover, a PBDTBD-50:IT-4F blended film showed homogeneous film with a favorable face-on orientation. The PBDTBD-50:IT-4F blended film showed excellent hole and electron mobility, which resulted in a superior carrier balance. PBDTBD-50-based PSCs, processed with o-xylene, achieved the highest PCE of 10.03%, which is four times higher than those of copolymer-based PSCs. The novel terpolymers composed of one electron donor unit and two electron acceptor units are expected to make a considerable contribution to the development of high-performance PSCs.

Wide Band Gap Photovoltaic Polymer Based on Pyrrolo[3,4-f]benzotriazole-5,7-dione (TzBI) with Ultrahigh VOC Beyond 1.25 V

Pyrrolo[3,4-f]benzotriazole-5,7-dione (TzBI) is an effective electron-accepting (A) unit to construct photovoltaic polymers. Though TzBI-based polymers have realized promising photovoltaic performa...

Photoisomerization-coupled electron transfer.

Photochromic molecular structures constitute a unique platform for constructing molecular switches, sensors, and memory devices. One of their most promising applications is as light-switchable electron acceptor or donor units. Here, we investigate a previously unexplored process that we postulate may occur in such systems: an ultrafast electron transfer triggered by a simultaneous photoisomerization of the donor or the acceptor moiety. We propose a theoretical model for this phenomenon and, with the aid of density functional theory calculations, apply it to the case of a dihydropyrene-type photochromic molecular donor. By considering the wavepacket dynamics and the photoisomerization yield, we show that the two processes involved, electron transfer and photoisomerization, are in general inseparable and need to be treated in a unified manner. We finish by discussing how the efficiency of photoisomerization-coupled electron transfer can be controlled experimentally.

Preparation and Characterization of Semi-alicyclic Polyimides Containing Trifluoromethyl Groups for Optoelectronic Application.

Transparent polyimides (PI) films with outstanding overall performance are attractive for next generation optoelectronic and microelectronic applications. Semi-alicyclic PIs derived from alicyclic dianhydrides and aromatic diamines have proved effective to prepare transparent PIs with high transmittance. To optimize the combined properties of semi-alicyclic PIs, incorporating bulky trifluoromethyl groups into the backbones is regarded as a powerful tool. However, the lack of fundamental understanding of structure–property relationships of fluorinated semi-alicyclic PIs constrains the design and engineering of advanced films for such challenging applications. Herein, a series of semi-alicyclic PIs derived from alicyclic dianhydrides and trifluoromethyl-containing aromatic diamines was synthesized by solution polycondensation at high temperature. The effects of alicyclic structures and bulky trifluoromethyl groups on thermal, dielectric and optical properties of PIs were investigated systematically. These PI films had excellent solubility, low water absorption and good mechanical property. They showed high heat resistance with Tg in the range of 294–390 °C. It is noted that tensile strength and thermal stability were greatly affected by the rigid linkages and alicyclic moieties, respectively. These films exhibited obviously low refractive indices and significantly reduced dielectric constants from 2.61 to 2.76, together with low optical birefringence and dielectric anisotropy. Highly transparent films exhibited cutoff wavelength even as low as 298 nm and transmittance at 500 nm over 85%, displaying almost colorless appearance with yellowness index (b*) below 4.2. The remarkable optical improvement should be mainly ascribed to both weak electron-accepting alicyclic units and bulky electron-withdrawing trifluoromethyl or sulfone groups. The present work provides an effective strategy to design molecular structures of optically transparent PIs for a trade-off between solution-processability, low water uptake, good toughness, high heat resistance, low dielectric constant and excellent optical transparency.

Selenophene‐Flanked Diketopyrrolopyrrole Based Conjugated Polymers for Ambipolar Field‐Effect Transistors

Summary of main observation and conclusionThe development of selenophene‐flanked DPP (SeDPP) based copolymers, especially for the ambipolar ones, lags behind other aromatic group flanked DPP‐based polymers. Herein, we report two new ambipolar SeDPP‐based conjugated polymers. One is the alternating polymer PSeDPPFT with normal SeDPP and 3,4‐difluorothiophene units. The other is PSeFDFT, in which the electron acceptor unit is replaced by a new SeDPP derivative, referred as to half‐fused SeDPP. The more planar structure of half‐fused SeDPP endows the backbone of PSeFDFT with good rigidity and planarity. Both polymers exhibit ambipolar transporting properties in air. The PSeFDFT based field‐effect transistors (FETs) display higher and more balanced ambipolar properties with μhave of 0.27 cm2·V–1·s–1, μeave of 0.18 cm2·V–1·s–1, and μhave/μeave of 1.5 than those of PSeDPPFT (μhave = 0.11 cm2·V–1·s–1, μeave = 0.042 cm2·V–1·s–1, and μh/μe = 2.6). This is attributed to the more planar structure, lower LUMO level, higher HOMO level, and better interchain packing orientations of PSeFDFT by comparing with PSeDPPFT. Therefore, a new molecular design strategy to modulate the hole and electron transporting properties is proposed for conjugated D‐A polymers.

Enhanced performance of ternary polymer solar cells via property modulation of co-absorbing wide band-gap polymers

A new approach is presented here to maximize the efficiency of ternary blend polymer solar cells (ter-PSCs). The properties of co-absorbing wide band-gap polymers are fine-tuned via the insertion of two different appropriate electron-acceptor units on their backbone in different ratios, and the resulting polymers are utilized as a co-absorbent on ter-PSCs. The copolymerization of benzodithiophene, pyrrolopyrrole-1,3-dione, and difluoro-benzothiadiazole derivatives at three different ratios, 1.00:1.00:0.00, 1.00:0.50:0.50, and 1.00:0.25:0.75, produces the polymers P1–P3. The absorption bands of P1–P3 are gradually red-shifted, and the band-gaps are reduced. The crystallinity of the polymers is increased in the order of P1 < P2 < P3. The binary polymer solar cells (bi-PSCs) are fabricated using blends of P1, P2, or P3 with PC70BM and provide comparable power conversion efficiencies (PCEs) of 5.41%, 5.55%, and 4.01%, respectively. However, the inclusion of 20 wt% of each of P1, P2, and P3 on a P4 (=PTB7-Th):PC70BM blend offers PCEs of 9.31%, 9.60%, and 9.85%, respectively, which are higher than that of the bi-PSC made using a blend of P4:PC70BM (PCE = 8.20%). The improved absorption, crystallinity, and carrier mobilities of the ternary blends are the main reasons for their enhanced photovoltaic performance compared with the binary blends.

High Open-circuit Voltage and Low Voltage Loss in All-polymer Solar Cell with a Poly(coronenediimide-vinylene) Acceptor

Reducing the voltage loss (Vloss) is a critical factor in optimizing the open-circuit voltage (Voc) and overall power-conversion efficiency (PCE) of polymer solar cells. In the current work, by designing a novel electron-accepting unit of coronenediimide (CDI) and using it as the main functional building block, a new polymer acceptor CDI-V is developed and applied to fabricate all-polymer solar cells. Compared with the perylenediimide-based polymer acceptors we previously reported, the current CDI-V polymer possesses a noticeably elevated lowest unoccupied molecular orbital (LUMO). Thereby, by virtue of the enlarged energy gap between the donor HOMO and acceptor LUMO, a high Voc value of 1.05 V is achieved by the all-polymer photovolatic device, along with an impressively low Vloss of 0.55 V. As remarkably, in spite of an extremely small LUMO level offset of 0.01 eV exhibited by the donor and acceptor polymers, effective charge separation still takes place in the all-polymer device, as evidenced by a proper short-circuit current (Jsc) of 9.5 mA·cm2 and a decent PCE of 4.63%.

Designing indenothiophene-based acceptor materials with efficient photovoltaic parameters for fullerene-free organic solar cells.

Non-fullerene small molecular acceptors (NFSMAs) exhibit promising photovoltaic performance which promoted the rapid progress of organic solar cells (OSCs). In this study, an attempt is done to explore indenothiophene-based high-performance small molecular electron acceptors for organic solar cells. We have designed five acceptor molecules (M1-M5) with strong donor moiety indenothiophene linked to five different end-capped group acceptor moieties: diflouro-2-methylene-3-oxo-2,3-dihydroindene-1-ylidene)malononitrile (A1), 1-(dicyanomethylene)-2-methylene-3-oxo-2,3-dihydro-1H-indene-5,6-dicarbonitrile (A2), methyl-6-cyano-3-(dicyanomethylene)-2-methylene-1-oxo-2,3-dihydro-1H-indene-5-carboylate (A3), 2-(6-cyano-5-fluoro-2-methylene-3-oxo-2,3 dihydro-1H-indene-1-ylidene)malononitrile (A4), and (Z)-methyl 3-(benzo [c][1,2,5]thiadiazol-4-yl)-2-cyanoacrylate (A5) respectively. The structure-property relationship was studied and effects of structural modification on the optoelectronic properties of these acceptors (M1-M5) were determined systematically by comparing it with reference molecule R, which is recently reported as excellent non-fullerene-based small acceptor molecule. Among all designed molecules, M5 is proven as a suitable candidate for organic solar cell applications due to better photovoltaic properties including narrow HOMO-LUMO energy gap (2.11 eV), smallest electron mobility (λe= 0.0038eV), highest λmax values (702.82 nm in gas) and (663.09 nm in chloroform solvent) and highest open-circuit voltage (Voc = 1.49V) with respect to HOMOPTB7-Th-LUMOacceptor. Our results indicate that introducing more end-capped electron-accepting units is a simple and effective alternative strategy for the design of promising NFSMAs. This theoretical framework also proves that the conceptualized NFSMAs are superior and thus are recommended for the future construction of high-performance organic solar cell devices. Graphical abstract.

Rational design of a novel isoindigo-based conjugated terpolymer with panchromatic absorption and its application to polymer solar cells

In this study, a panchromatic absorptive conjugated terpolymer, BDTID-BDT3MT, is synthesized, which consists of electron-donating benzodithiophene (BDT), isoindigo (ID) as a strong electron-accepting unit, and methyl-3-thiophenecarboxylate (3 MT) as a weak electron-accepting unit. By combining these three monomers into the structure of a conjugated terpolymer, the absorption spectrum of BDTID-BDT3MT is induced to exhibit an unusually broad, strong, and uniform band in the wavelength interval from 300 to 750 nm, which helps achieving highly efficient light harvesting under solar illumination. The intriguing panchromatic absorption behavior of BDTID-BDT3MT was explained on the basis of theoretical calculations using simplified repeating units. Polymer solar cells (PSCs) based on BDTID-BDT3MT as a donating polymer and non-fullerene acceptors (e.g., ITIC-4F) exhibited a high power conversion efficiency (PCE) of 5.38%, high open circuit voltage (Voc) of 0.88 V, and short circuit current density (Jsc) of 13.74 mA/cm2, while PSCs based on ternary blend systems consisting of BDTID, BDT3MT, and ITIC-4F exhibited lower PCE and Jsc of 3.74% and 11.15 mA/cm2, respectively. The superior performance of PSCs based on BDTID-BDT3MT can be attributed to their high light harvesting efficiencies and relatively more favorable nano-phase film morphologies. Our results establish that BDT, ID, and 3 MT units serve as useful building blocks in the structure of conjugated terpolymers due to their remarkably broad panchromatic absorption band.

A novel AH-D-A-type phase junction material to improve photovoltaic performance and device stability in fullerene OSCs

In order to boost power conversion efficiency (PCE) and operation stability of organic solar cells (OSCs), we propose a new idea of phase junction materials (PJMs) used as a photoactive layer component to improve device performance and stability. For this purpose, a novel PJM of H-TRC8 based on rhodanine unit was designed with a conjugated AH-D-A framework. Here, AH is a hydrogen-donating electron acceptor unit, D-A is an electron donor-acceptor unit. It is found that H-TRC8 has a good carrier-transporting ability, as well as definite hydrogen-bond and D-A interaction with donor/acceptor materials. While H-TRC8 is added into the PBDB-T/PC60BM blend film with 1.0 vol% DIO (1,8-diiodooctane), the resulting blend film exhibited an enhanced absorption and improved morphology. The intermolecular hydrogen bond between H-TRC8 and PBDB-T plays an important role for them, which is confirmed via FT-IR spectra and 2D 1H NMR. As a result, the PBDB-T/PC60BM-based devices with 1.25 wt% H-TRC8 and 1.0 vol% DIO exhibit a significantly improved PCE of 8.06%, which is increased by 20.6% in comparison to that in the binary devices with 1.0 vol% DIO only (PCE = 6.68%). Furthermore, the device stability is significantly enhanced with only 43% PCE roll-off at 150 °C for 120 h. This work indicates that AH-D-A-type PJMs are promising photovoltaic materials used as photoactive-layer components to achieve high-performance fullerene OSCs with high device stability.

Synthesis and Characterization of Isoindigo-Based Push-Pull Chromophores.

Symmetrical and unsymmetrical chromophores of isoindigo 3-7 were designed and synthesized, in which isoindigo was used as the central unit (electron acceptor unit A), triphenylamine as the end capping unit (electron donor group D), 1,1,4,4-tetracyanobutadiene (TCBD, A') and cyclohexa-2,5-diene-1,4-diylidene-expanded TCBD (A″) as the acceptor unit. The effects of multiacceptor units on photophysical, electrochemical, and computational studies were investigated. The photophysical properties of isoindigo 6 and 7 exhibit a strong intramolecular charge transfer (ICT) absorption band in the near IR region. The isoindigo 4-7 shows multi-redox waves with a low electrochemical band gap, which signifies the tuning of highest occupied molecular orbital-lowest unoccupied molecular orbital energy levels and enhance the π-conjugation. The computational studies demonstrate that there is a good agreement with experimental data. The molecular design and synthesis of isoindigo 4-7 gives a new avenue for the development of building blocks in organic electronics.

Fluorination Effect for Highly Conjugated Alternating Copolymers Involving Thienylenevinylene-Thiophene-Flanked Benzodithiophene and Benzothiadiazole Subunits in Photovoltaic Application.

Two two-dimensional (2D) donor–acceptor (D-A) type conjugated polymers (CPs), namely, PBDT-TVT-BT and PBDT-TVT-FBT, in which two ((E)-(4,5-didecylthien-2-yl)vinyl)- 5-thien-2-yl (TVT) side chains were introduced into 4,8-position of benzo[1,2-b:4,5-bʹ]dithiophene (BDT) to synthesize the highly conjugated electron-donating building block BDT-TVT, and benzothiadiazole (BT) and/or 5,6-difluoro-BT as electron-accepting unit, were designed to systematically ascertain the impact of fluorination on thermal stability, optoelectronic property, and photovoltaic performance. Both resultant copolymers exhibited the lower bandgap (1.60 ~ 1.69 eV) and deeper highest occupied molecular orbital energy level (EHOMO, –5.17 ~ –5.37 eV). It was found that the narrowed absorption, deepened EHOMO and weakened aggregation in solid film but had insignificant influence on thermal stability after fluorination in PBDT-TVT-FBT. Accordingly, a PBDT-TVT-FBT-based device yielded 16% increased power conversion efficiency (PCE) from 4.50% to 5.22%, benefited from synergistically elevated VOC, JSC, and FF, which was mainly originated from deepened EHOMO, increased μh, μe, and more balanced μh/μe ratio, higher exciton dissociation probability and improved microstructural morphology of the photoactive layer as a result of incorporating fluorine into the polymer backbone.

Elevated Photovoltaic Performance in Medium Bandgap Copolymers Composed of Indacenodi-thieno[3,2-b]thiophene and Benzothiadiazole Subunits by Modulating the π-Bridge.

Two random conjugated polymers (CPs), namely, PIDTT-TBT and PIDTT-TFBT, in which indacenodithieno[3,2-b]thiophene (IDTT), 3-octylthiophene, and benzothiadiazole (BT) were in turn utilized as electron-donor (D), π-bridge, and electron-acceptor (A) units, were synthesized to comprehensively analyze the impact of reducing thiophene π-bridge and further fluorination on photostability and photovoltaic performance. Meanwhile, the control polymer PIDTT-DTBT with alternating structure was also prepared for comparison. The broadened and enhanced absorption, down-shifted highest occupied molecular orbital energy level (EHOMO), more planar molecular geometry thus enhanced the aggregation in the film state, but insignificant impact on aggregation in solution and photostability were found after both reducing thiophene π-bridge in PIDTT-TBT and further fluorination in PIDTT-TFBT. Consequently, PIDTT-TBT-based device showed 185% increased PCE of 5.84% profited by synergistically elevated VOC, JSC, and FF than those of its counterpart PIDTT-DTBT, and this improvement was chiefly ascribed to the improved absorption, deepened EHOMO, raised μh and more balanced μh/μe, and optimized morphology of photoactive layer. However, the dropped PCE was observed after further fluorination in PIDTT-TFBT, which was mainly restricted by undesired morphology for photoactive layer as a result of strong aggregation even if in the condition of the upshifted VOC. Our preliminary results can demonstrate that modulating the π-bridge in polymer backbone was an effective method with the aim to enhance the performance for solar cell.

Design Principles and Synergistic Effects of Chlorination on a Conjugated Backbone for Efficient Organic Photovoltaics: A Critical Review.

The pursuit of low-cost, flexible, and lightweight renewable power resources has led to outstanding advancements in organic solar cells (OSCs). Among the successful design principles developed for synthesizing efficient conjugated electron donor (ED) or acceptor (EA) units for OSCs, chlorination has recently emerged as a reliable approach, despite being neglected over the years. In fact, several recent studies have indicated that chlorination is more potent for large-scale production than the highly studied fluorination in several aspects, such as easy and low-cost synthesis of materials, lowering energy levels, easy tuning of molecular orientation, and morphology, thus realizing impressive power conversion efficiencies in OSCs up to 17%. Herein, an up-to-date summary of the current progress in photovoltaic results realized by incorporating a chlorinated ED or EA into OSCs is presented to recognize the benefits and drawbacks of this interesting substituent in photoactive materials. Furthermore, other aspects of chlorinated materials for application in all-small-molecule, semitransparent, tandem, ternary, single-component, and indoor OSCs are also presented. Consequently, a concise outlook is provided for future design and development of chlorinated ED or EA units, which will facilitate utilization of this approach to achieve the goal of low-cost and large-area OSCs.

Chlorination of dithienobenzodithiophene (DTBDT) based polymers to simultaneously improve the VOC, JSC and FF of non-fullerene organic solar cells

Two donor–π–acceptor polymers (PE64 and PE65) with dithienobenzodithiophene (DTBDT) as the electron-donating unit and quinoxaline as the electron-accepting unit were designed to extend the application of DTBDT in non-fullerene organic solar cells.

Donor-acceptor random regioregular π-conjugated copolymers based on poly(3-hexylthiophene) with unsymmetrical monothienoisoindigo units.

Donor–acceptor π-conjugated random copolymers based on regioregular poly(3-hexylthiophene), rr-P3HT, with unsymmetrical monothienoisoindigo moieties were obtained by direct arylation polycondensation of 2-bromo-3-hexylthiophene with unsymmetrical monothienoisoindigo motifs under the optimized conditions [palladium-immobilized on thiol-modified silica gel with chloride counter anions, PITS-Cl (2.5 mol%), PivOH (1.0 equiv.), K2CO3 (3.0 equiv.), DMAc, 100 °C, 24 h]. Incorporation of unsymmetrical monothienoisoindigo electron-acceptor units into the polymers tuned their highest occupied and lowest unoccupied molecular orbital levels, which were close to those of the hole transport material (PEDOT) and electron transport material (PCBM), respectively, in thin-film organic solar cells. Alkyl chains of the unsymmetrical monothienoisoindigo units in the polymers tuned their macrostructural order, resulting in the observation of crystalline patterns and specific absorption peaks in thin films. An organic solar cell containing the most crystalline random copolymer showed an efficiency of 1.91%.

Near-infrared resonance stimulated Raman study of short-lived transients in PTB7 films

Low-bandgap conjugated polymers, which have an alternating structure of electron-donating and electron-withdrawing monomer units in their main chains, are expected to show high photovoltaic efficiency when the monomer units are appropriately designed. For understanding key factors of the photovoltaic efficiency, we have investigated the structure and dynamics of short-lived transients in films of a low-bandgap conjugated polymer with an alternating structure of thieno[3,4-b]thiophene and benzo[1,2-b:4,5-b′]dithiophene, PTB7, by time-resolved near-infrared stimulated Raman spectroscopy as well as time-resolved near-infrared absorption spectroscopy. Positive polarons of PTB7 are clearly distinguished from its singlet excitons in stimulated Raman spectra by the peak position of a CC stretch band of the thiophene rings in benzodithiophene and intensity of a CSC deformation band of them. These differences strongly suggest that the repeated structure of thiophene rings in the main chain predominantly contributes to the charge transfer characteristics of PTB7 in films. Time-resolved absorption and stimulated Raman spectra of PTB7 films blended with a fullerene derivative show that spectral changes associated with the initial charge separation complete within 1 ps while effects of conformational changes and intermediate species are absent. We suggest that alternating copolymers composed of electron-donating and electron-accepting units commonly undergo the initial charge separation process without conformational changes or intermediates.