Electromagnetically Induced Transparency Research Articles

Accurate measurement of the frequency offset of the laser based on electromagnetically induced transparency

We propose a method using electromagnetically induced transparency (EIT) to measure the frequency offset of the laser relative to a cavity’s resonance frequency, thereby reducing the laser detuning when preparing Rydberg atoms. Laser reflection by the vapor cell enables observation of two EIT peaks corresponding to the co-propagating and counter-propagating beams, and the peaks’ position is related to laser detuning, allowing us to estimate the frequency offset of the probe and coupling lasers. The method reduces the measurement uncertainty compared to directly observing saturated absorption spectroscopy (SAS) and EIT, making it suitable for applications that require strict control over laser detuning.

Fano resonance in excitation spectroscopy and cooling of an optically trapped single atom

Electromagnetically induced transparency (EIT) can be used to cool an atom in a harmonic potential close to the ground state by addressing several vibrational modes simultaneously. Previous experimental efforts focus on trapped ions and neutral atoms in a standing wave trap. In this work, we demonstrate EIT cooling of an optically trapped single neutral atom, where the trap frequencies are an order of magnitude smaller than in an ion trap and a standing wave trap. We resolve the Fano resonance feature in fluorescence excitation spectra and the corresponding cooling profile in temperature measurements. A final temperature of around 6 µK is achieved with EIT cooling, a factor of 2 lower than the previous value obtained using polarization gradient cooling. Published by the American Physical Society 2024

Electromagnetically-induced transparency assists the Raman gradient echo memory at moderate detuning, dependent on gradient order

Abstract Optical quantum memories are essential for quantum communications and photonic quantum technologies. Ensemble optical memories based on 3-level interactions are a popular basis for implementing these memories. All such memories, however, suffer from loss due to scattering. In off-resonant 3-level interactions, such as the Raman gradient echo memory (GEM), scattering loss can be reduced by a large detuning from the intermediate state. In this work, we show how electromagnetically induced transparency adjacent to the Raman absorption line plays a crucial role in reducing scattering loss, so that maximum efficiency is in fact achieved at a moderate detuning. Furthermore, the effectiveness of the transparency, and therefore the efficiency of GEM, depends on the order in which gradients are applied to store and recall the light. We provide a theoretical analysis and show experimentally how the efficiency depends on gradient order and detuning.

Cross-domain heterogeneous metasurface inverse design based on a transfer learning method.

In this Letter, a transfer learning method is proposed to complete design tasks on heterogeneous metasurface datasets with distinct functionalities. Through fine-tuning the inverse design network and freezing the parameters of hidden layers, we successfully transfer the metasurface inverse design knowledge from the electromagnetic-induced transparency (EIT) domain to the three target domains of EIT (different design), absorption, and phase-controlled metasurface. Remarkably, in comparison to the source domain dataset, a minimum of only 700 target domain samples is required to complete the training process. This work presents a significant solution to lower the data threshold for the inverse design process and provides the possibility of knowledge transfer between different domain metasurface datasets.

Terahertz metal-graphene hybrid metamaterial for active manipulation of electromagnetically induced transparency

The dynamic tuning of terahertz (THz) electromagnetically induced transparency (EIT) offers significant potential in rapidly changing THz regulation fields, such as the next generation wireless communication, switching, and sensing. In this work, we demonstrate a THz EIT metamaterial by combining a circular and a rectangular split-ring resonator (CSRR and RSRR) based on the bright-bright mode coupling. The introduction of graphene into the EIT structure enables active tuning, and reveals two distinct regulation mechanisms in the metal-graphene hybrid EIT metamaterial: 1. the internal coupling effect diminishes with the increase of the Fermi level in the CSRR-graphene integration; 2. the surface electric field undergoes redistribution in the RSRR-graphene integration. These two dynamic regulation mechanisms are well confirmed by the simulated electric field distribution. As a result, the transmittance within the EIT window of the hybrid metamaterial can be precisely modulated, exhibiting a significant modulation depth of >85%. Notably, the integration with graphene in the RSRR allows for simultaneous modulation of resonances on either side of the EIT peaks, which expands more THz modulation channels. This work enriches the design and implementation methods for active THz EIT and shows potential applications in THz dynamic application scenarios.

Active dual-control electromagnetically induced transparency analog in metal- vanadium dioxide-photosensitive silicon hybrid metamaterial

We investigate an active dual-control metamaterial leveraging electromagnetically induced transparency (EIT), exploiting near-field interactions between electric and magnetic dipole resonances. Our hybrid strip element, combining metal and vanadium dioxide, generates electric dipole resonance, while split-ring resonators integrating metal and photosensitive silicon induce magnetic dipole resonance. Simulations confirm coupling validity and demonstrate dynamic adjustability of EIT via temperature and light intensity changes. EIT modulation transitions between transparent and non-resonant states due to temperature fluctuations, or resonant states with varying light intensity. Temperature adjustments dominate when both factors are altered. Analysis via a coupled oscillator model reveals modulation of damping rates as the origin of disappearance curve variations. This innovative design enhances tunable EIT metamaterial versatility, with implications for high transmission ratios and adaptable slow-light effects in terahertz applications.

On-demand design of dual-band electromagnetically induced transparency metamaterials based on improved convolutional neural network

Metamaterials (MMs) with dual electromagnetically induced transparency (EIT)-like windows possess more powerful capacity in Terahertz filtering than their single-EIT counterparts, but the design difficulty normally increases as the MM structure becomes more complicated. This work proposes a deep-learning method using a long short-term memory (LSTM) assisted convolutional neural network (LSTM-CNN) to simplify the design of dual-EIT MMs. Compared to the traditional CNN, the LSTM-CNN exhibits higher prediction accuracy for the geometric parameters of the MM according to the input spectrum, which can be ascribed to enhanced capability of extracting the spectral characteristics after adding the LSTM network. Further adding a feature-transforming network before the LSTM-CNN model to build a link between the MM performance and structure, a customizable MM design is realized. Two different dual-EIT metamaterials are quickly designed with this strategy, and the design accuracy has been fully demonstrated by simulations and experiments. The proposed deep learning method can achieve the rapid and efficient design of dual-EIT MMs, which offers a new pathway for the on-demand design of complex MM-based devices.

Photon blockade with high photon occupation via cavity electromagnetically induced transparency

Photon blockade (PB) is one of the effective methods to generate single-photon sources. In general, both the PB effect with the significant sub-Poissonian statistics and a large mean photon number are desired to guarantee the brightness and the purity of single-photon sources. Here, we propose to obtain the PB effect at the cavity dark-state polariton (DSP) using a cavity Λ-type electromagnetically induced transparency (EIT) system with and without the two-photon dissipation (TPD). In the Raman resonance case, the PB effect at the DSP could by realized by using the TPD process in the weak or intermediate coupling regime, which accompanies with near unity transmission, i.e., very high photon occupation. In the slightly detuned Raman resonance case, the excited state is induced into the components of the DSP, and the atomic dissipation path is added into the two-photon excitation paths. Thus, the PB effect at the DSP can be obtained due to the quantum destructive interference (QDI) in the strong coupling regime, which can be further enhanced using the TPD process. Due to the slight detuning, the PB effect still remains high photon occupation and has highly tunability. This work provides an alternative way to manipulate the photon statistics by the PB effect and has potential applications in generating single-photon sources with high brightness and purity.

Theoretical studies on electromagnetic induced transparency and exciton–exciton annihilation in dye aggregates

Electromagnetically induced transparency (EIT) and exciton–exciton annihilation (EEA) can be described by a common three level model, but the response to the external field is different. We present a theoretical study on EIT and EEA in dye molecular system under photoexcitation in the framework of reduced density matrix theory. It is found that EEA is more likely to occur under shorter pulse duration and stronger exciton coupling, while EIT is the opposite. The study of EIT in dye molecular system is of great significance for multi-signal processing in organic material based optical devices.

Investigating transfer of coherence, direction of light propagation and Rydberg blockade in a four-level [formula omitted]-type system under linear and nonlinear interaction regimes

This theoretical study reveals that the transfer of coherence (TOC) and the direction of light propagation vector play a crucial role in transitioning from electromagnetically induced transparency (EIT) to electromagnetically induced absorption (EIA) in a four-level closed and open cascade (Ξ)-type light-atom interacting systems (LAIS) under both linear as well as nonlinear interaction regimes. It is found that the amplitudes of the coherence signals are distinctly influenced by the system’s openness driven by the presence of additional dipole allowed levels not connected by the lasers and the type of interaction regimes. The effect of TOC on the EIT to EIA transition is discussed in detail by the velocity-dependent dressed state analysis and velocity mapping of the probe absorption coefficient. The findings also reveal that the efficiency of the counter-propagation scheme of the coupling fields is higher than the co-propagation scheme. Furthermore, we have estimated the Rydberg blockade effect on the probe absorption profiles for some specific velocity groups of atoms, which exhibit probe gain in the medium along with EIT and EIA patterns.

Magnetic splitting of electromagnetically induced transparency and absorption spectra in a standing-wave coupled lambda-type system

We study the splitting of traveling wave and standing wave coupled Electromagnetically Induced Transparency (EIT) and Electromagnetically Induced enhanced Absorption (EIA) lines in the presence of a uniform magnetic field in an Electromagnetically Induced Grating (EIG). We realize a Λ-type system in a room-temperature Doppler-broadened buffer-gas-free, unshielded vapor cell of pure 133Cs atoms. Different orientations of the magnetic field are studied while the polarizations of the coupling and probe laser beams are arranged in the lin⊥lin configuration. The effects of the different field directions on the EIT and the EIG-induced EIA are explained in light of the existing theory. The magnetically induced high-contrast features in the EIG scheme are also discussed in comparison to the low-contrast EIT features observed for the same strengths of magnetic field.

Electromagnetically induced transparency in a quantum ring: Interband transition

In this paper, we study the electromagnetically induced transparency (EIT) of a quantum ring by considering both interband and intraband transitions, under the influence of external electric and magnetic fields, as well as Rashba spin–orbit interaction (RSOI). Four band k⋅p model along with effective mass one band approximation were respectively employed to compute valence and conduction bands energy eigenvalues. We investigate the effects of applied electric and magnetic fields, as well as RSOI and the ring dimensions, on EIT. Our results reveal that the external magnetic field and the ring dimensions have a great influence on the EIT phenomenon. Ultimately, our numerical results will be used to develop devices with controllable nonlinear optical absorption and refraction.

Ultra-wideband terahertz fingerprint enhancement sensing and inversion model supported by single-pixel reconfigurable graphene metasurface

AbstractThe molecular fingerprint sensing technology based on metasurface has unique attraction in the biomedical field. However, in the terahertz (THz) band, existing metasurface designs based on multi-pixel or angle multiplexing usually require more analyte amount or possess a narrower tuning bandwidth. Here, we propose a novel single-pixel graphene metasurface. Based on the synchronous voltage tuning, this metasurface enables ultra-wideband ($$\sim$$ ∼ 1.5 THz) fingerprint enhancement sensing of trace analytes, including chiral optical isomers, with a limit of detection (LoD) ≤ 0.64 μg/mm2. The enhancement of the fingerprint signal ($$\sim$$ ∼ 17.4 dB) originates from the electromagnetically induced transparency (EIT) effect excited by the metasurface, and the ideal overlap between the light field constrained by single-layer graphene (SLG) and ultra-thin analyte. Meanwhile, due to the unique nonlinear enhancement mechanism in graphene tuning, the absorption envelope distortion is inevitable. To solve this problem, a universal fingerprint spectrum inversion model is developed for the first time, and the restoration of standard fingerprints reaches Rmax2 ≥ 0.99. In addition, the asynchronous voltage tuning of the metasurface provides an opportunity for realizing the dynamic reconfiguration of EIT resonance and the slow light modulation in the broadband range. This work builds a bridge for ultra-wideband THz fingerprint sensing of trace analytes, and has potential applications in active spatial light modulators, slow light devices and dynamic imaging equipments.

Single and dual-band electromagnetically induced transparency in a strongly near field coupled planar toroidal terahertz metamaterial

We demonstrate electromagnetically induced transparency (EIT) in a strongly coupled planar terahertz toroidal metasurface through simulations, theory and experiments. The near-field interaction between a unique toroidal resonator enveloped by a 2-arc resonator leads to the excitation of EIT in the metamaterial. A modulation in the EIT response of the metasurface is observed by increasing the gap between the resonators, resulting a redshift of the transmission response. Furthermore, we report the excitation of dual-band EIT in the metasurface by introducing an asymmetry in the 2-arc resonator. A theoretical oscillator model is used to validate the experimental EIT effect, and to gain an in-depth understanding of the coupling mechanism of the proposed geometry. Metasurfaces were fabricated and characterized for each individual resonator geometry as well as the geometries corresponding to the single-EIT design and the dual-EIT design. This study can contribute to the development of slow light devices and ultrafast switches in the terahertz regime.

Gain-assisted quantum heat engine based on electromagnetically induced transparency

We propose a scheme to realize a gain-assisted quantum heat engine (QHE) based on electromagnetically induced transparency (EIT), which consists of a three-level Λ-type atomic system interacting with two thermal reservoirs and a coupling field. The gain without inversion is induced to the system via spontaneously generated coherence (SGC) between two lower levels. The SGC has significantly affect on the system’s dynamics, resulting in an enhancement of the emission cross-section and spectral brightness of the QHE.

Subwavelength Photorefractive Grating in a Thin‐Film Lithium Niobate Microcavity

AbstractSubwavelength gratings play a fundamental and pivotal role in numerous science and applications for wave manipulation, exhibiting distinctive features such as filtering, phase manipulation, and anti‐reflection. However, conventional fabrication methods for ultrasmall periodic structures are constrained by the fundamental optical diffraction limit, making it challenging to produce subwavelength gratings for optics. Here, a novel technique is demonstrated to build a reconfigurable subwavelength photorefractive grating (SPG) in a thin‐film lithium niobate on the platform of an optical microcavity. Such SPGs are optically induced through the photorefractive effect and the subwavelength features originate from the spatial phase modulations of the pump's standing wave. The resulting SPGs lead to the mode splitting of two counter‐propagating modes inside the microcavity, exhibiting an Electromagnetically Induced Transparency (EIT)‐like transmission spectrum. Moreover, the unique subwavelength characteristic of SPGs enables first‐order quasi‐phase‐matching for backward second‐harmonic generation, a long‐standing problem in nonlinear optics. Also, free‐space‐to‐chip vertical nonlinear frequency conversion can be achieved in a similar manner. These results provide a flexible approach toward fabricating subwavelength gratings, which holds significant potential in various applications such as nonlinear frequency conversion, optical communication, sensing, and quantum technologies.

Controlling behaviour of transparency and absorption in three-coupled multiple quantum wells via spontaneously generated coherence

This article presents a coherent phenomenon called spontaneously generated coherence (SGC) under the regime of electromagnetically induced transparency (EIT) in a three-coupled multiple quantum wells. We demonstrate that the presence of SGC in these quantum wells lead to intriguing modifications in the transparency window within the absorption spectrum. At the same time, modification of the dispersive nature is also demonstrated which enables the feasibility of the system in diverse applications based on light propagation. The absorption and dispersion responses are found to be varied by the individual strength of the first and second control fields in presence as well as in absence of SGC in the EIT regime. The positional shifting of the transparency window and simultaneous modifications in the dispersive profiles by tuning the control field detunings of both the first and second control fields are also revealed. Some absorption and dispersion contours are illustrated for getting better insights into the modifications of the optical responses via SGC. Finally, by manipulating the strength of the SGC parameter, we observe the changes in the respective position of the transparency window and dispersion curve. It is expected that the current investigations will pave novel ways for innovative applications in quantum communications, and fabrication of advanced photonic devices.

Measurement of relative transition strengths of 133Cs Rydberg D states using electromagnetically induced transparency

Transition strengths between states are fundamental physical properties of atomic spectra. The differences in fine structure splitting of certain states are mainly attributed to the angular momentum parts of transition dipole matrix elements. These can be calculated by integrating the wave-functions theoretically and can be accessed by selecting corresponding polarizations of the exciting lasers experimentally. We measured the transition strengths ratios of nD5/2\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$_{5/2}$$\\end{document}/nD3/2\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$_{3/2}$$\\end{document} via Rydberg electromagnetically induced transparency (EIT) by changing the powers and polarizations of probing and coupling lasers in a room temperature cesium vapor cell. The variation of the ratios on the principal quantum number n which ranges from 40 to 62 is also investigated. Theoretical and experimental results agreed with each other.

Optical switch based on tunable perfect photon absorption

We investigate the manipulation of optical field within quantum electrodynamics (QED) scheme. In our proposal, the cold three-level atoms interact with a two-sided cavity driven by two coherent beams with a relative phase. Coherent perfect absorption (CPA) appears when the beams are in phase. However, the perfect outputs occur when the beams are out of phase. On the basis of the phase modulation, an optical switch can be operated at a high efficiency. With a coherent control laser, the excited and metastable levels of the atoms are coupled. Electromagnetically induced transparency (EIT) is produced at two-photon resonance, which leads to four-band CPA. By virtue of the control laser, the switching efficiency can be maximized in a weaker probe field, which provides advantages over two-level atoms on weak-signal switching.

Multi-band tunable electromagnetically induced transparencies based on active metasurface with polarization-independent property

The analogue of an electromagnetically induced transparency (EIT) spectrum is achieved using a metasurface that consists of an array of cross and L-shaped resonators. The mechanism of the EIT-like phenomenon are analyzed, and the influence of geometrical parameters on the effect is discussed. We achieve a multi-band EIT-like through structure configuration. In particular, polarization-independent EIT is realized. A potential application in sensing is suggested and the sensitivity of 65 GHz RIU−1 is obtained. We also investigate the impact of analyte and substrate on the transmission spectrum. We find that when the analyte thickness is higher than 40 μm, the EIT spectral shift is less affected by the analyte thickness. The thickness insensitive characteristics are beneficial for reducing errors caused by analyte dose, thereby improving the accuracy of sensing. By introducing a phase change material, vanadium dioxide, we obtain active control of the EIT effect. Our results provide valuable insights into the development of multi-band tunable compact devices based on metasurfaces.