Electromagnetic Waves Research Articles

Pulsed radio wave as a sustainable control technology to improve indoor air quality

The need for technologies that can clean the air indoors has grown in pace with the rise in outside pollution. Maintaining interior environment adaptability requires a permanent air purification system that may be utilized to control PM2.5/10. In addition to more traditional methods of air purification, developing advanced control systems that effectively reduce PM levels sustainably is necessary. Pulsed radio waves may expedite the dry deposition of particles having aerodynamic dimensions of less than 30 µm. The charging and coagulation processes are evaluated in an indoor restricted environment. Experimental results reveal a similar pattern to the Monte Carlo models. Distribution of charge due to the nature of the charging environment increases the coagulation rate. Contained experimental testing confirms the filtering system functions as expected, corroborated by the present research. Daily average levels of PM2.5 and PM10 were lowered by between 55 and 41% according to a study done in three indoor settings using the control technology. Research conducted throughout all seasons showed that the approach was consistently efficient in reducing PM2.5/10. It was shown that PM concentrations could be lowered by around 45 percent using pulse radio wave technology, leading to this conclusion. The use of electromagnetic waves (EM waves) to eliminate air pollution has been suggested as a radical new approach. Considering the limitations of already used strategies, this is of paramount significance while considering solutions to control air pollution.

Microscopic structure of electromagnetic whistler wave damping by kineticmechanisms in hot magnetized Vlasov plasmas

Abstract Electromagnetic transverse perturbations propagating parallel to the external magnetic field in a
warm electron plasma, specifically the warm electron whistler waves, are simulated in κ distributed
electrons. The Vlasov-Maxwell phase-space continuum simulations are applied to the stable and
unstable (i.e., isotropic and anisotropic) VDFs including those with energetic tail, i.e., κ distribution.
The variation of real frequency from both numerical solution of dispersion relation and simulations
show limited sensitivity to electron temperature in low wave-number regime as compared to high
wave number regime, however the opposite holds for the imaginary frequency or the decay rate. For
large amplitude, nonlinear cases, simulated with anisotropic κ distributions the very low anisotropy
cases find the growth rate increasing with increasing the κ while this trend reverses for higher
anisotropy. The phase-space portraits of the these cases show that after the linear damping phase
of the evolution, the particles are trapped in the wave magnetic field leading to the wave amplitudes
oscillating about a mean value which follow the theoretical analysis [1].

Superscattering of electromagnetic waves from subwavelength dielectric structures

Superscattering, corresponding to the scattering cross section of a scatterer being significantly larger than its single-channel limit, has attracted increasing attention due to its huge potential for practical applications. The realization of superscattering relies on the overlapping of multiple resonance modes in a scatterer. Accordingly, superscattering phenomena have been observed primarily in alternating plasmonic/dielectric layered structures which support surface plasmons. However, such systems suffer from high Ohmic loss due to the excitation of surface plasmons, hindering broader application of the plasmonic/dielectric hybrid systems. On the other hand, subwavelength structures based on high permittivity dielectric materials (such as ferroelectric ceramics) offer expansive opportunities to realize electric and magnetic resonances at microwave and THz frequencies. Here, based on optimization methods involving mode analysis, we numerically demonstrate superscattering from individual multilayered dielectric cylinders. The maximum scattering cross section achieved is determined by the collective contributions from several resonance modes excited in a complex cylinder. Our results reveal that a combination of mode analysis and a custom optimization method can enable efficient designs of complex dielectric structures exhibiting exotic scattering responses.

Mechanical recycling process: An alternative for a viable disposal of carbon fiber‐reinforced thermoplastic waste

AbstractConcern for the environment has increased the interest of the automotive and aerospace industries in evaluating the feasibility of mechanical recycling of waste carbon‐fiber‐reinforced polymer composites (CFRP) and waste from protective films used during the transport and storage of thermosetting composites, which are removed and discarded during manufacturing. Therefore, this work aimed to develop a recyclable composite from protective film waste by incorporating carbon fiber/poly(aryl ether ketone) (CF/PAEK) composite particles obtained through grinding in knife mills, followed by an analysis of the particle size distribution. Protective film residues (PEres) were cut to facilitate processing. A mixture of low‐density polyethylene and PEres (50/50) was used as the composite matrix, and 5, 10, 15, and 20 wt% CF/PAEK composite particles were added as the reinforcing agents. Then, these recycled composites were prepared by melt mixing using a twin‐screw extruder and injection molding to obtain standardized samples. Mechanical, thermal, electrical, and electromagnetic properties were evaluated. It was possible to observe that the increase in the addition of CF/PAEK composite particles contributed to a 290% increase in elastic modulus values and a 9.1% increase in Shore D hardness, electrical conductivity, and attenuation of the electromagnetic wave. Furthermore, satisfactory adhesion between filler and matrix contributed to a good interface and reinforcement of the final material.Highlights Mechanical recycling by extrusion of waste from the automotive and aerospace sectors Grinding of carbon fiber/poly(aryl ether ketone) composite waste to be used as filler Protective film waste used as matrix Composites developed with waste with good electrical and electromagnetic properties The addition of thermoplastic composite residues does not affect thermal and mechanical properties

Effects of non-ionizing radio frequency electromagnetic radiation on the development and behavior of early embryos of Danio rerio

ABSTRACT Biological effects of radio frequency electromagnetic radiation (RF-EMR) in the range of 900–1800 MHz emerging from the mobile phone were investigated and were found to influence the locomotor pattern when exposure was initiated from 1 hour post fertilization (hpf) in zebrafish embryos (ZE), Danio rerio. Mobile phones and other wireless devices offer tremendous advantages. However, on the flipside they are leading to an increased electromagnetic energy in the environment, an excess of which could be termed as electromagnetic pollution. Herein, we tried to understand the effects of RF-EMR emerging from the mobile phone, on the development and behavior of ZE, exposed to RF-EMR (specific absorption rate of 1.13 W/kg and 1800 MHz frequency) 1 hr daily, for 5 days. To understand if there could be any developmental stage-specific vulnerability to RF-EMR, the exposure was initiated at three different time points: 1hpf, 6hpf and 24hpf of ZE development. Observations revealed no significant changes in the survival rate, morphology, oxidative stress or cortisol levels. However, statistically significant variations were observed in the batch where exposure started at 1hpf, with respect to locomotion patterns (distance travelled: 659.1 ± 173.1 mm Vs 963.5 ± 200.4 mm), which could be correlated to anxiety-like behavior; along with a corresponding increase in yolk consumption (yolk sac area: 0.251 ± 0.019 mm2 Vs 0.225 ± 0.018 mm2). Therefore, we conclude that RF-EMR exposure influences the organism maximally during the earliest stage of development, and we also believe that an increase in the time of exposure (corresponding to the patterns of current usage of mobile phones) might reveal added afflictions.

Interacting supernovae as high-energy multimessenger transients

Multiwavelength observations have revealed that dense, confined circumstellar material (CCSM) commonly exists in the vicinity of supernova (SN) progenitors, suggesting enhanced mass losses years to centuries before their core collapse. Interacting SNe, which are powered or aided by interaction with the CCSM, are considered to be promising high-energy multimessenger transient sources. We present detailed results of broadband electromagnetic emission, following the time-dependent model proposed in the previous work on high-energy SN neutrinos [K. Murase, New prospects for detecting high-energy neutrinos from nearby supernovae, ]. We investigate electromagnetic cascades in the presence of Coulomb losses, including inverse-Compton and synchrotron components that significantly contribute to MeV and high-frequency radio bands, respectively. We also discuss the application to SN 2023ixf. Published by the American Physical Society 2024

Surfactant-induced morphology engineering in chitosan-derived carbon aerogels realizing high-efficiency absorption of electromagnetic wave

Despite the significant research advances in dielectric loss-type absorbents, developing high-efficiency electromagnetic wave (EMW) absorbents dominated by the conduction loss are still challenging due to the imbalance between impedance matching and conduction loss. In this study, for the first time, high-efficiency EMW absorption governed by the conduction loss in chitosan-derived carbon aerogels was realized through surfactant-assisted morphology modification. Electrostatic interaction and hydrogen bonding between chitosan and surfactants were ingeniously applied to induce tightly-stacked nanosheets to transform into three-dimensional (3D) interwork structure and loosely-stacked porous nanosheets, respectively, and thus the moderately enhanced conductivity converted the original EMW-transparent carbon to EMW-absorbing carbon. Benefiting from the favorable balance of impedance matching and conduction loss, the carbon aerogels with 3D interwork structure showed a broad effective absorption bandwidth (EAB) of 7.2 GHz (2.8 mm) and minimum reflection loss (RLmin) of −42.6 dB; and moreover, an ultra-wide EAB of 7.84 GHz at 2.9 mm occurred in the samples with loosen and wrinkled nanosheet structure, both outperforming most of reported carbon-based composite aerogels. This work provides a new insight for the morphology regulation and performance optimization of carbonaceous EMW absorbents.

Earthquakes Three-Stage Early Warning and Short-Term Prediction

Among the anomalous geophysical phenomena observed preceding earthquakes, specific attention has been given to VLF/LF, ULF (very low frequency/low frequency, ultra-low frequency) electromagnetic (EM) emissions, recorded before earthquakes, because of an interesting correlation between them and seismic activity. Numerous scientific papers have been published on this topic, providing convincing evidence of these processes observed using ground-based and satellite ground-based observations during the preparation for the earthquake. These phenomena are detectable both at laboratory and geological scales. The authors of this paper have used an avalanche-like unstable geological model of fault formation and a model of the generation of electromagnetic emissions detected before the earthquakes to prove the prediction capabilities of VLF/LF EM emissions. The first gives a clear imagination of earthquake preparation in all stages in the focal area from the beginning of the micro-cracks appearing to the final formation of fault. Another one, based on electrodynamics, explains the EM emissions origination process and offers a formula that analytically connects the observed frequency of EM radiation with the linear size of the emitted body (fault). It is worth emphasizing the synthesis and rather harmonious relation of the mentioned models. Based on the above models conducted studies clearly show that the description of a qualitative avalanche-unstable geological model of fault formation using VLF/LF EM radiation data made it possible to quantitatively characterize the full cycle of preparation and occurrence of earthquake process. Namely, in the case of VLF/LF emissions monitoring, the beginning of the “avalanche process” of ruptures is considered the first stage of early warning of an incoming earthquake. The so-called EM emissions “silence” period is assessed as the second stage of early warning. The third early warning or an alarm about an incoming earthquake may be announced immediately at the moment of the first anomaly appearance subsequently the “silence” period. This article offers the method of earthquake three-step early warning and short-term (hourly) prediction.

Simulation‐Guided Design of Gradient Multilayer Microwave Absorber with Tailored Absorption Performance

AbstractFlexible microwave absorber (MAR), vital in advanced applications such as wearable electronics and precision devices, are highly valued for their lightweight, exceptional electromagnetic waves (EWs), and ease of fabrication. However, optimizing the electromagnetic parameters of microwave absorption materials (MAMs) to enhance absorption ability and expand effective absorption broadband (EAB, reflection loss (RL) <−10 dB) is a considerable challenge. Herein, a permittivity‐attenuation evaluation diagram (PAED) is constructed using parameter scanning based on the Materials Genome Initiative to determine the ideal electromagnetic parameters and thickness, optimize absorption efficiency, and obtain highly efficient absorbers. Guided by the PAED, a multilayer MAR consisting of a “matching‐absorption‐reflection layer” and a dielectric loss gradient aligned with the direction of EWs propagation is developed. This design significantly enhances the EWs penetration and ensures effective absorption, attributed to the well‐matched impedance and attenuation characteristics. As anticipated, the microwave absorption of the absorber (density = 0.063 g cm−3) is optimized, with an RL of −34 dB at d = 4 mm and an EAB covering the entire X‐band (8.2–12.4 GHz). This study presents a novel approach for establishing a material database for MAMs and developing high‐performance absorbers characterized by thinness, lightness, broad operational frequency range, and robust absorption capacity.

Reconfigurable-Intelligent-Surface-Enhanced Dynamic Resource Allocation for the Social Internet of Electric Vehicle Charging Networks with Causal-Structure-Based Reinforcement Learning

Charging stations and electric vehicle (EV) charging networks signify a significant advancement in technology as a frontier application of the Social Internet of Things (SIoT), presenting both challenges and opportunities for current 6G wireless networks. One primary challenge in this integration is limited wireless network resources, particularly when serving a large number of users within distributed EV charging networks in the SIoT. Factors such as congestion during EV travel, varying EV user preferences, and uncertainties in decision-making regarding charging station resources significantly impact system operation and network resource allocation. To address these challenges, this paper develops a novel framework harnessing the potential of emerging technologies, specifically reconfigurable intelligent surfaces (RISs) and causal-structure-enhanced asynchronous advantage actor–critic (A3C) reinforcement learning techniques. This framework aims to optimize resource allocation, thereby enhancing communication support within EV charging networks. Through the integration of RIS technology, which enables control over electromagnetic waves, and the application of causal reinforcement learning algorithms, the framework dynamically adjusts resource allocation strategies to accommodate evolving conditions in EV charging networks. An essential aspect of this framework is its ability to simultaneously meet real-world social requirements, such as ensuring efficient utilization of network resources. Numerical simulation results validate the effectiveness and adaptability of this approach in improving wireless network efficiency and enhancing user experience within the SIoT context. Through these simulations, it becomes evident that the developed framework offers promising solutions to the challenges posed by integrating the SIoT with EV charging networks.

Recent Progress in Electromagnetic Wave Absorption Coatings: From Design Principles to Applications

Recent Progress in Electromagnetic Wave Absorption Coatings: From Design Principles to Applications

Optimizing the electromagnetic wave absorption properties of core-shell Fe/FeN/Fe3C@GN nanoparticles by low-temperature NH3 plasma

Surface modification via low-temperature plasma has an extensive application prospect in different engineering fields due to its comprehensive merits in facilitating the introduction of functional groups and creating more heterogeneous interfaces. Herein, a simple high-temperature plasma method is developed to get novel multiple-phase nanocomposites of core-shell Fe/FeN/Fe3C@GN nanoparticles with bifunctional characteristics of microwave absorption (MA) and anti-corrosion. And then, we further investigate the MA properties of Fe/FeN/Fe3C@GN nanoparticles after low-temperature NH3 plasma etching. It is found that surface modification of Fe/FeN/Fe3C@GN nanoparticles can generate remarkable changes in specific surface areas, Raman features and MA properties of these nanocomposites. The Fe/FeN/Fe3C@GN nanoparticles after NH3 plasma etching possess excellent MA properties with an optimal reflection loss (RL) of −51.0 dB at an ultra-thin thickness of 1.9 mm with a low filling content of 30 wt% and the corresponding effective absorption bandwidth (EAB < −10 dB) up to 4.7 GHz (13.3–18.0 GHz). The fascinating MA properties of etched Fe/FeN/Fe3C@GN nanoparticles may be attributed to the cooperative effect of several points: (i) The NH3 plasma etch introduces a large number of polar functional groups, which can be regarded as the polarization center to produce more polarization loss; (ii) The appropriate dielectric loss and impedance matching achieve a good balance, and the abundant heterogeneous interface significantly enhances the polarization relaxation loss; (iii) The existence of hetero-nanostructure further improves the multiple reflections and scattering of the propagating microwaves. In addition, this work provides a new strategy for the design and fabrication of core-shell MA materials.

Radio-Frequency Conductivity Evaluation Method Based on Surface/Interface Scattering of Metallic Coatings

Developing non-destructive evaluation methods for the radio frequency (RF) conductivity of conductive coatings can accelerate the performance evaluation and development of wireless communication devices. By using a split-resonator cavity to compare 800 nm copper/graphite and 1000 nm copper/graphite, we found that the RF conductivity increased by 45.5% and 82.7%, respectively, from 15 GHz to 40 GHz (pure copper was −7.2%), indicating that the bulk materials analysis method is not suitable for coating materials. Combined with electromagnetic wave theory, we believe that the critical factor lies in the additional losses of the electromagnetic waves at the copper/graphite interface and substrate. Based on the skin depth theory, the concept of triple skin depth is proposed to calculate the power loss of copper/graphite at different frequencies, considering rough Peff (including the power loss of the rough surface, copper coatings, copper/graphite interface, and graphite) compared with smooth pure copper Pc. Combined with the relationship between RF conductivity and electromagnetic wave power loss, the conductivity of copper coatings σCu at different frequencies is obtained by analyzing the measured σeff. Compared with the roughness model, the calculation error decreased from 30% to below 7%. Our study provides a theoretical basis for the regulation of the RF conductivity of metal coatings at different frequencies.

Beyond the Spectrum: Unleashing the Potential of Infrared Radiation in Poultry Industry Advancements

The poultry industry is dynamically advancing production by focusing on nutrition, management practices, and technology to enhance productivity by improving feed conversion ratios, disease control, lighting management, and exploring antibiotic alternatives. Infrared (IR) radiation is utilized to improve the well-being of humans, animals, and poultry through various operations. IR radiation occurs via electromagnetic waves with wavelengths ranging from 760 to 10,000 nm. The biological applications of IR radiation are gaining significant attention and its utilization is expanding rapidly across multiple sectors. Various IR applications, such as IR heating, IR spectroscopy, IR thermography, IR beak trimming, and IR in computer vision, have proven to be beneficial in enhancing the well-being of humans, animals, and birds within mechanical systems. IR radiation offers a wide array of health benefits, including improved skin health, therapeutic effects, anticancer properties, wound healing capabilities, enhanced digestive and endothelial function, and improved mitochondrial function and gene expression. In the realm of poultry production, IR radiation has demonstrated numerous positive impacts, including enhanced growth performance, gut health, blood profiles, immunological response, food safety measures, economic advantages, the mitigation of hazardous gases, and improved heating systems. Despite the exceptional benefits of IR radiation, its applications in poultry production are still limited. This comprehensive review provides compelling evidence supporting the advantages of IR radiation and advocates for its wider adoption in poultry production practices.

Molecular Intercalation‐Induced Two‐Phase Evolution Engineering of 1T and 2H‐MS2 (M = Mo, V, W) for Interface‐Polarization‐Enhanced Electromagnetic Absorbers

AbstractPolarization at interfaces is an important loss mechanism for electromagnetic wave (EMW) attenuation, though the motion behavior of carriers in interfaces composed of different types of conductors has yet to be investigated. Tuning the phase structure of transition metal dichalcogenides (TMDs) MS2 (M = Mo, V, W) by organics small molecule intercalation to achieve the modulation of interfacial types is an effective strategy, where 1T‐MS2 exhibits metallic properties and 2H‐MS2 has semiconducting properties. To exclude the contribution of the intrinsic properties of TMDs materials, three TMDs (MoS2, VS2, and WS2), which also possess phase transitions, are investigated. Among them, the 1T‐MS2 composite exhibits excellent EMW absorption performance under the synergistic effect of interfacial polarization and conduction loss. 1T‐MoS2/MOF‐A exhibits the best EMW absorption performance with an RLmin of −61.07 dB at a thickness of 3.0 mm and an EAB of 7.2 GHz at 2.3 mm. The effectiveness of the modulation of the interfacial polarization using 1T‐phase and 2H‐phase MS2 is demonstrated, which is important for the analysis of the carrier motion behavior during the interfacial loss.

Effect of nano-carbon black content and dispersibility on the properties of cement paste

In this study, we analyzed the microstructure, pore structure, and changes in electromagnetic parameters of cement paste with nano-carbon black (CB) added. The following conclusions were drawn: The addition of CB significantly influenced the pore structure of the cement paste, increasing the content of pores less than 100 nm and improving the overall pore structure. The use of the dispersant further enhanced the dispersion of CB and increased its filling effect. Additionally, adding CB had a significant impact on the compressive strength of the cement paste; the presence of certain CB aggregates reduced the compressive strength. However, when the CB content was 0.5wt%, the use of the dispersant decreased the size of CB aggregates and effectively increased the compressive strength. SEM images displayed the dispersion state of CB aggregates within the cement paste, demonstrating that the size and quantity of aggregates could be reduced through the use of the dispersant. The change in the CB dispersion state also slightly affected the electromagnetic parameters and wave absorption properties of the cement paste. The research results presented in this paper offer valuable insights for the design and application of CB cement paste.

Magnetic Resonance Modulation in Ferrocene-alkyne Conjugated Polymer for Electromagnetic Wave Absorption

Magnetic Resonance Modulation in Ferrocene-alkyne Conjugated Polymer for Electromagnetic Wave Absorption

Dual‐ and triple‐passband coupled‐complementary FSSs based on the four‐arms star geometry

AbstractThe authors propose a system of closely coupled‐complementary frequency‐selective surfaces (FSSs) based on the four‐arms star geometry with dual‐ and triple‐passbands responses for 5G applications. Four complementary structure configurations are presented, and depending on the chosen configuration, the structure can create two or three transmission bands in one or both polarisations of the electromagnetic waves. The designed FSSs are compact and have stable behaviour at different incident angles. The complementary FSS passes signals around 2.6 and 6.2 GHz, and a structural offset allows the transmission at a third frequency (4.2 GHz). To validate the proposed designs, four prototypes are fabricated and measured. Numerical and experimental characterisations are in good agreement.

An improved positioning method based on compensation and optimization of ultra-wideband ranging results

Achieving precision in positioning under conditions of significant interference remains an unresolved challenge in research. This study introduces a low-cost ultra-wideband (UWB) distance compensation model that addresses electromagnetic wave loss in practical indoor settings. This paper employs kurtosis to detect non-line-of-sight environments, which are frequently induced by pedestrian movement. The Generalized Extreme Studentized Deviate algorithm is utilized to discern and eliminate outliers in ranging values and the Piecewise Cubic Hermite Interpolating Polynomial algorithm compensates for the eliminated data points. Finally, Kalman filtering is used to improve UWB ranging results, allowing for better error elimination and compensation. Experimental results demonstrate that our proposed algorithm has higher accuracy and the mean square error improvement ratio can reach more than 20% in dynamic positioning tests.

Optical fractional solitonic structures to decoupled nonlinear Schrödinger equation arising in dual-core optical fibers

This paper explores a specific class of equations that model the propagation of optical pulses in dual-core optical fibers. The decoupled nonlinear Schrödinger equation with properties of M fractional derivatives is considered as the governing equation. The proposed model consists of group-velocity mismatch and dispersion, nonlinear refractive index and linear coupling coefficient. Different types of solutions, including mixed, dark, singular, bright-dark, bright, complex and combined solitons are extracted by using the integration methods known as fractional modified Sardar subequation method and modified F-expansion method. Optical soliton propagation in optical fibers is currently a subject of great interest due to the multiple prospects for ultrafast signal routing systems and short light pulses in communications. In nonlinear dispersive media, optical solitons are stretched electromagnetic waves that maintain their intensity due to a balance between the effects of dispersion and nonlinearity. Furthermore, hyperbolic, periodic and exponential solutions are generated. A fractional complex transformation is applied to reduce the governing model into the ordinary differential equation and then by the assistance of balance principle the methods are used, depending upon the balance number. Also, we plot the different graphs with the associated parameter values to visualize the solutions behaviours with different parameter values. The findings of this work will help to identify and clarify some novel soliton solutions and it is expected that the solutions obtained will play a vital role in the fields of physics and engineering.