Electromagnetic Waves Research Articles

Ultrawide Spectra Camouflage Coatings from Metallic Flake Powder.

Ultrawide-spectra-compatible camouflage materials are imperative for military science and national security due to the continuous advancement of various sophisticated multispectral detectors. However, ultrawide spectra camouflage still has challenges, as the spectral requirements for different bands are disparate and even conflicting. This work demonstrates an ultrawide spectra camouflage material compatible with visible (VIS, 400-800 nm), infrared (IR, 3-5 and 8-14 μm), and microwave (S-Ku bands, 2-12 GHz). The carbon nanotubes adsorbed on porous anodic alumina/aluminum flake powder (CNTs@PAA/AFP) material for ultrawide spectra camouflage is composed of bioinspired porous alumina surface layers for low visible reflection and aluminum flake powder substrate for low infrared emissivity, while the surface of the porous alumina layers is loaded with carbon nanotubes for microwave absorption. Compared with previous low-emissivity materials, CNTs@PAA/AFP has omnidirectional low reflectance (Ravg = 0.29) and high gray scale (72%) in the visible band. Further, it exhibits low emissivity (ε3-5μm = 0.15 and ε8-14μm = 0.18) in the dual infrared atmospheric window, which reduces the infrared lock-on range by 59.6%/49.8% in the mid/far-infrared band at high temperatures (573 K). The infrared camouflage performance calculated from the radiation temperature of CNTs@PAA/AFP coatings is enhanced to over 65%, which is at least 4 times greater than that of its substrate. In addition, the CNTs@PAA/AFP coating achieves high microwave absorption (RLmin = -42.46 dB) and an effective absorption bandwidth (EAB = 7.43 GHz) in the microwave band (S-Ku bands) due to the enhancement of interfacial polarization and conductive losses. This study may introduce new insight and feasible methods for multispectral manipulation, electromagnetic signal processing, and thermal management via bioinspired structural design and fabrication.

Interactions of Melanin with Electromagnetic Radiation: From Fundamentals to Applications.

Melanin, especially integumentary melanin, interacts in numerous ways with electromagnetic radiation, leading to a set of critical functions, including radiation protection, UV-protection, pigmentary and structural color productions, and thermoregulation. By harnessing these functions, melanin and melanin-like materials can be widely applied to diverse applications with extraordinary performance. Here we provide a unified overview of the melanin family (all melanin and melanin-like materials) and their interactions with the complete electromagnetic radiation spectrum (X-ray, Gamma-ray, UV, visible, near-infrared), which until now has been absent from the literature and is needed to establish a solid fundamental base to facilitate their future investigation and development. We begin by discussing the chemistries and morphologies of both natural and artificial melanin, then the fundamentals of melanin-radiation interactions, and finally the exciting new developments in high-performance melanin-based functional materials that exploit these interactions. This Review provides both a comprehensive overview and a discussion of future perspectives for each subfield of melanin that will help direct the future development of melanin from both fundamental and applied perspectives.

Induced Electromagnetic Radiation from a Charged Cloud in a Plane Gravitational Wave

Induced Electromagnetic Radiation from a Charged Cloud in a Plane Gravitational Wave

Doped Porous Carbon Spheres with Controllable Vesicle Structure: Preparation and the Effects of Pore Size on Electromagnetic Wave Absorption Properties.

This work reports on the preparation of uniform vesicle-structural carbon spheres doped with heteroatoms of N, P, and S, with the pore sizes strictly controlled by the hard templates of monodisperse submicron SiO2 spheres. The uniformly doped vesicular carbon microspheres are obtained in three steps: Stöber hydrolysis for the SiO2; in situ polymerization for the immobilization; and alkaline etching after carbonization. The size of the vesicles can be easily adjusted by regulating the particle size of the submicron SiO2 spheres, which has a significant effect on its electromagnetic wave (EMW) absorption performance. Compared with microspheres with pore sizes of 180 and 480nm, when the vesicle aperture is 327nm, with only 5.5wt.% filling load and 1.9mm thickness, the material shows the best EMW absorption behavior with the effective absorption bandwidth (EAB) covers the entire Ku band (6.32GHz) and the minimum reflection loss (RLmin) of -36.10dB, suggesting the optimized pore size of the microspheres can significantly improve the overall impedance matching of the material and achieve broadband wave absorption. This work paves the way for the enhancement of EMW absorption properties of porous material by optimizing the pore size of uniform apertures while maintaining their composition.

Bandpass frequency selective surfaces with fast roll-off characteristics

We propose a bandpass frequency selective surface (FSS) with fast cut-off characteristics and low insertion loss. It consists of a compact high-frequency hybrid compression board with five metal layers, two Rogers RO4003C layers, and two F4B layers. The hierarchical fitting of equivalent circuits is utilized to analyze the FSS, which maintains angular stability for dual-polarized electromagnetic waves at incidence angles of less than 20 degrees. Under normal incidence, transmission amplitudes in the K-band exceed −0.87 dB. Furthermore, the proposed FSS achieves a roll-off rate of 87.6 dB GHz−1, which can be applied in dual-frequency observing systems for millimeter astronomy.

Effects of Heat Treatment on the Electromagnetic Wave Absorption Characteristics of Resorcinol Formaldehyde Silicon Dioxide Ceramic Particles

In light of the pressing environmental and health issues stemming from electromagnetic pollution, advanced electromagnetic wave absorbing materials are urgently sought to solve these problems. The present study delved into the fabrication of the resorcinol formaldehyde (RF)/SiO2 ceramic particles using the sol–gel route. From SEM images and XRD and XPS analysis, it can be seen that the RF/SiO2 ceramic particles are successfully generated after heat treatment at 1500 °C. At room temperature, the sample treated at 1500 °C exhibited a minimum reflection loss of −47.6 dB in the range of 2–18 GHz when the matching thickness was 5.5 mm, showcasing strong attenuation capabilities. Moreover, these particles demonstrated a considerable effective electromagnetic wave absorption bandwidth of 3.14 GHz, evidencing their potential for wideband electromagnetic wave absorption. The temperature adjustment played a pivotal role in achieving optimal impedance matching. When the heat treatment temperature is increased from 800 °C to 1500 °C, the dielectric properties of the material are improved, thus achieving the best impedance matching, thereby optimizing the material’s absorption properties for specific frequency ranges, which makes it possible to customize the electromagnetic wave-absorbing characteristics to meet specific requirements across a range of applications.

A PVDF/MWCNTs/GO@MWCNTs/AgNWs bilayer structured composite film with ultra‐high EMI shielding and conductivity performance

AbstractElectromagnetic interference (EMI) shielding materials with easy processing, high electrical conductivity, and excellent absorption loss are urgently needed in aerospace, military stealth and portable electronic devices. In this study, a polyvinylidene fluoride/multi‐walled carbon nanotubes (PVDF/MWCNTs)‐3 wt% composite film prepared by simple solution mixing and polyethylene terephthalate (PET) nonwoven scraping method was used as the substrate, and the PVDF/MWCNTs/graphene oxide@multi‐walled carbon nanotubes (PVDF/MWCNTs/GO@MWCNTs) and PVDF/MWCNTs/GO@MWCNTs/silver nanowires (PVDF/MWCNTs/GO@MWCNTs/AgNWs) bilayer composite films were prepared by vacuum‐assisted filtration (VAF). When the amount of GO@MWCNTs was 20 mL, the conductivity of PVDF/MWCNTs/GO@MWCNTs film is 3.5 × 101 S m−1, the total EMI shielding effectiveness (EMI SET) was 15.5 dB and the EMI absorption efficiency (EMI SEA) was 10.7 dB, the specific EMI SE (SSE/T) was 539.5 dB/ dB/(cm−2 g). When the amount of AgNWs was 25 mL, the conductivity of PVDF/MWCNTs/GO@MWCNTs/AgNWs film with 0.47 mm thickness was 1.6 × 104 S m−1, the EMI SET was 69.1 dB, the EMI SEA was 61.1 dB, and the SSE/T was 2320.0 dB cm2 g−1. The results show that the absorption was played a dominant role in the EMI shielding mechanism of obtained films. The addition of GO@MWCNTs/AgNWs increases the electrical conductivity and EMI shielding performance of the film more than the addition of GO@MWCNTs. This is mainly because GO， MWCNTs and AgNWs formed a novel three‐dimensional conductive network structure inside the composite film due to their hydrogen bonding and van der Waals forces, which increases the carrier channels and promotes the interaction between the internal microcurrents and the electromagnetic waves, achieving the purpose of attenuating the electromagnetic waves. The obtained PVDF/MWCNTs/GO@MWCNTs/AgNWs film has good potential in EMI shielding in aerospace, military and electronic intelligence applications.Highlights Well‐dispersed and highly conductive GO@MWCNTs were prepared by hydrothermal synthesis. AgNWs with good conductivity and high aspect ratio were prepared. PVDF‐based bilayer composite films with novel 3D conductive network were prepared. The synergistic EMI shielding mechanism of the film is discussed.

All-dielectric achromatic hole-array metasurfaces

Metalens, an ultra-thin optical element composed of subwavelength structure, offers a new path for the development of miniaturized device imaging. Through the design of subwavelength units, arbitrary modulation of the phase, amplitude, and polarization of electromagnetic waves can be achieved. However, current metalenses generally suffer from the disadvantages of narrowband and Ohmic losses, which limits the development of high-quality imaging. In this work, using all-dielectric hole-array structure within the framework of effective medium theory, we demonstrate the achromatic focusing effect based on the basic Huygens principle. Moreover, by changing the position of the point source, this metalens can also achieve directional refraction with flexible angles. Our results provide a new solution for the practical application of miniaturized integrated high-quality imaging, and may open up avenues for constructing efficient artificial metasurface with metamaterials for energy harvesting and other wave manipulation.

Pulsed radio wave as a sustainable control technology to improve indoor air quality

The need for technologies that can clean the air indoors has grown in pace with the rise in outside pollution. Maintaining interior environment adaptability requires a permanent air purification system that may be utilized to control PM2.5/10. In addition to more traditional methods of air purification, developing advanced control systems that effectively reduce PM levels sustainably is necessary. Pulsed radio waves may expedite the dry deposition of particles having aerodynamic dimensions of less than 30 µm. The charging and coagulation processes are evaluated in an indoor restricted environment. Experimental results reveal a similar pattern to the Monte Carlo models. Distribution of charge due to the nature of the charging environment increases the coagulation rate. Contained experimental testing confirms the filtering system functions as expected, corroborated by the present research. Daily average levels of PM2.5 and PM10 were lowered by between 55 and 41% according to a study done in three indoor settings using the control technology. Research conducted throughout all seasons showed that the approach was consistently efficient in reducing PM2.5/10. It was shown that PM concentrations could be lowered by around 45 percent using pulse radio wave technology, leading to this conclusion. The use of electromagnetic waves (EM waves) to eliminate air pollution has been suggested as a radical new approach. Considering the limitations of already used strategies, this is of paramount significance while considering solutions to control air pollution.

Microscopic structure of electromagnetic whistler wave damping by kineticmechanisms in hot magnetized Vlasov plasmas

Abstract Electromagnetic transverse perturbations propagating parallel to the external magnetic field in a
warm electron plasma, specifically the warm electron whistler waves, are simulated in κ distributed
electrons. The Vlasov-Maxwell phase-space continuum simulations are applied to the stable and
unstable (i.e., isotropic and anisotropic) VDFs including those with energetic tail, i.e., κ distribution.
The variation of real frequency from both numerical solution of dispersion relation and simulations
show limited sensitivity to electron temperature in low wave-number regime as compared to high
wave number regime, however the opposite holds for the imaginary frequency or the decay rate. For
large amplitude, nonlinear cases, simulated with anisotropic κ distributions the very low anisotropy
cases find the growth rate increasing with increasing the κ while this trend reverses for higher
anisotropy. The phase-space portraits of the these cases show that after the linear damping phase
of the evolution, the particles are trapped in the wave magnetic field leading to the wave amplitudes
oscillating about a mean value which follow the theoretical analysis [1].

Superscattering of electromagnetic waves from subwavelength dielectric structures

Superscattering, corresponding to the scattering cross section of a scatterer being significantly larger than its single-channel limit, has attracted increasing attention due to its huge potential for practical applications. The realization of superscattering relies on the overlapping of multiple resonance modes in a scatterer. Accordingly, superscattering phenomena have been observed primarily in alternating plasmonic/dielectric layered structures which support surface plasmons. However, such systems suffer from high Ohmic loss due to the excitation of surface plasmons, hindering broader application of the plasmonic/dielectric hybrid systems. On the other hand, subwavelength structures based on high permittivity dielectric materials (such as ferroelectric ceramics) offer expansive opportunities to realize electric and magnetic resonances at microwave and THz frequencies. Here, based on optimization methods involving mode analysis, we numerically demonstrate superscattering from individual multilayered dielectric cylinders. The maximum scattering cross section achieved is determined by the collective contributions from several resonance modes excited in a complex cylinder. Our results reveal that a combination of mode analysis and a custom optimization method can enable efficient designs of complex dielectric structures exhibiting exotic scattering responses.

Mechanical recycling process: An alternative for a viable disposal of carbon fiber‐reinforced thermoplastic waste

AbstractConcern for the environment has increased the interest of the automotive and aerospace industries in evaluating the feasibility of mechanical recycling of waste carbon‐fiber‐reinforced polymer composites (CFRP) and waste from protective films used during the transport and storage of thermosetting composites, which are removed and discarded during manufacturing. Therefore, this work aimed to develop a recyclable composite from protective film waste by incorporating carbon fiber/poly(aryl ether ketone) (CF/PAEK) composite particles obtained through grinding in knife mills, followed by an analysis of the particle size distribution. Protective film residues (PEres) were cut to facilitate processing. A mixture of low‐density polyethylene and PEres (50/50) was used as the composite matrix, and 5, 10, 15, and 20 wt% CF/PAEK composite particles were added as the reinforcing agents. Then, these recycled composites were prepared by melt mixing using a twin‐screw extruder and injection molding to obtain standardized samples. Mechanical, thermal, electrical, and electromagnetic properties were evaluated. It was possible to observe that the increase in the addition of CF/PAEK composite particles contributed to a 290% increase in elastic modulus values and a 9.1% increase in Shore D hardness, electrical conductivity, and attenuation of the electromagnetic wave. Furthermore, satisfactory adhesion between filler and matrix contributed to a good interface and reinforcement of the final material.Highlights Mechanical recycling by extrusion of waste from the automotive and aerospace sectors Grinding of carbon fiber/poly(aryl ether ketone) composite waste to be used as filler Protective film waste used as matrix Composites developed with waste with good electrical and electromagnetic properties The addition of thermoplastic composite residues does not affect thermal and mechanical properties

Effects of non-ionizing radio frequency electromagnetic radiation on the development and behavior of early embryos of Danio rerio

ABSTRACT Biological effects of radio frequency electromagnetic radiation (RF-EMR) in the range of 900–1800 MHz emerging from the mobile phone were investigated and were found to influence the locomotor pattern when exposure was initiated from 1 hour post fertilization (hpf) in zebrafish embryos (ZE), Danio rerio. Mobile phones and other wireless devices offer tremendous advantages. However, on the flipside they are leading to an increased electromagnetic energy in the environment, an excess of which could be termed as electromagnetic pollution. Herein, we tried to understand the effects of RF-EMR emerging from the mobile phone, on the development and behavior of ZE, exposed to RF-EMR (specific absorption rate of 1.13 W/kg and 1800 MHz frequency) 1 hr daily, for 5 days. To understand if there could be any developmental stage-specific vulnerability to RF-EMR, the exposure was initiated at three different time points: 1hpf, 6hpf and 24hpf of ZE development. Observations revealed no significant changes in the survival rate, morphology, oxidative stress or cortisol levels. However, statistically significant variations were observed in the batch where exposure started at 1hpf, with respect to locomotion patterns (distance travelled: 659.1 ± 173.1 mm Vs 963.5 ± 200.4 mm), which could be correlated to anxiety-like behavior; along with a corresponding increase in yolk consumption (yolk sac area: 0.251 ± 0.019 mm2 Vs 0.225 ± 0.018 mm2). Therefore, we conclude that RF-EMR exposure influences the organism maximally during the earliest stage of development, and we also believe that an increase in the time of exposure (corresponding to the patterns of current usage of mobile phones) might reveal added afflictions.

Interacting supernovae as high-energy multimessenger transients

Multiwavelength observations have revealed that dense, confined circumstellar material (CCSM) commonly exists in the vicinity of supernova (SN) progenitors, suggesting enhanced mass losses years to centuries before their core collapse. Interacting SNe, which are powered or aided by interaction with the CCSM, are considered to be promising high-energy multimessenger transient sources. We present detailed results of broadband electromagnetic emission, following the time-dependent model proposed in the previous work on high-energy SN neutrinos [K. Murase, New prospects for detecting high-energy neutrinos from nearby supernovae, ]. We investigate electromagnetic cascades in the presence of Coulomb losses, including inverse-Compton and synchrotron components that significantly contribute to MeV and high-frequency radio bands, respectively. We also discuss the application to SN 2023ixf. Published by the American Physical Society 2024

Surfactant-induced morphology engineering in chitosan-derived carbon aerogels realizing high-efficiency absorption of electromagnetic wave

Despite the significant research advances in dielectric loss-type absorbents, developing high-efficiency electromagnetic wave (EMW) absorbents dominated by the conduction loss are still challenging due to the imbalance between impedance matching and conduction loss. In this study, for the first time, high-efficiency EMW absorption governed by the conduction loss in chitosan-derived carbon aerogels was realized through surfactant-assisted morphology modification. Electrostatic interaction and hydrogen bonding between chitosan and surfactants were ingeniously applied to induce tightly-stacked nanosheets to transform into three-dimensional (3D) interwork structure and loosely-stacked porous nanosheets, respectively, and thus the moderately enhanced conductivity converted the original EMW-transparent carbon to EMW-absorbing carbon. Benefiting from the favorable balance of impedance matching and conduction loss, the carbon aerogels with 3D interwork structure showed a broad effective absorption bandwidth (EAB) of 7.2 GHz (2.8 mm) and minimum reflection loss (RLmin) of −42.6 dB; and moreover, an ultra-wide EAB of 7.84 GHz at 2.9 mm occurred in the samples with loosen and wrinkled nanosheet structure, both outperforming most of reported carbon-based composite aerogels. This work provides a new insight for the morphology regulation and performance optimization of carbonaceous EMW absorbents.

Earthquakes Three-Stage Early Warning and Short-Term Prediction

Among the anomalous geophysical phenomena observed preceding earthquakes, specific attention has been given to VLF/LF, ULF (very low frequency/low frequency, ultra-low frequency) electromagnetic (EM) emissions, recorded before earthquakes, because of an interesting correlation between them and seismic activity. Numerous scientific papers have been published on this topic, providing convincing evidence of these processes observed using ground-based and satellite ground-based observations during the preparation for the earthquake. These phenomena are detectable both at laboratory and geological scales. The authors of this paper have used an avalanche-like unstable geological model of fault formation and a model of the generation of electromagnetic emissions detected before the earthquakes to prove the prediction capabilities of VLF/LF EM emissions. The first gives a clear imagination of earthquake preparation in all stages in the focal area from the beginning of the micro-cracks appearing to the final formation of fault. Another one, based on electrodynamics, explains the EM emissions origination process and offers a formula that analytically connects the observed frequency of EM radiation with the linear size of the emitted body (fault). It is worth emphasizing the synthesis and rather harmonious relation of the mentioned models. Based on the above models conducted studies clearly show that the description of a qualitative avalanche-unstable geological model of fault formation using VLF/LF EM radiation data made it possible to quantitatively characterize the full cycle of preparation and occurrence of earthquake process. Namely, in the case of VLF/LF emissions monitoring, the beginning of the “avalanche process” of ruptures is considered the first stage of early warning of an incoming earthquake. The so-called EM emissions “silence” period is assessed as the second stage of early warning. The third early warning or an alarm about an incoming earthquake may be announced immediately at the moment of the first anomaly appearance subsequently the “silence” period. This article offers the method of earthquake three-step early warning and short-term (hourly) prediction.

Simulation‐Guided Design of Gradient Multilayer Microwave Absorber with Tailored Absorption Performance

AbstractFlexible microwave absorber (MAR), vital in advanced applications such as wearable electronics and precision devices, are highly valued for their lightweight, exceptional electromagnetic waves (EWs), and ease of fabrication. However, optimizing the electromagnetic parameters of microwave absorption materials (MAMs) to enhance absorption ability and expand effective absorption broadband (EAB, reflection loss (RL) <−10 dB) is a considerable challenge. Herein, a permittivity‐attenuation evaluation diagram (PAED) is constructed using parameter scanning based on the Materials Genome Initiative to determine the ideal electromagnetic parameters and thickness, optimize absorption efficiency, and obtain highly efficient absorbers. Guided by the PAED, a multilayer MAR consisting of a “matching‐absorption‐reflection layer” and a dielectric loss gradient aligned with the direction of EWs propagation is developed. This design significantly enhances the EWs penetration and ensures effective absorption, attributed to the well‐matched impedance and attenuation characteristics. As anticipated, the microwave absorption of the absorber (density = 0.063 g cm−3) is optimized, with an RL of −34 dB at d = 4 mm and an EAB covering the entire X‐band (8.2–12.4 GHz). This study presents a novel approach for establishing a material database for MAMs and developing high‐performance absorbers characterized by thinness, lightness, broad operational frequency range, and robust absorption capacity.

Reconfigurable-Intelligent-Surface-Enhanced Dynamic Resource Allocation for the Social Internet of Electric Vehicle Charging Networks with Causal-Structure-Based Reinforcement Learning

Charging stations and electric vehicle (EV) charging networks signify a significant advancement in technology as a frontier application of the Social Internet of Things (SIoT), presenting both challenges and opportunities for current 6G wireless networks. One primary challenge in this integration is limited wireless network resources, particularly when serving a large number of users within distributed EV charging networks in the SIoT. Factors such as congestion during EV travel, varying EV user preferences, and uncertainties in decision-making regarding charging station resources significantly impact system operation and network resource allocation. To address these challenges, this paper develops a novel framework harnessing the potential of emerging technologies, specifically reconfigurable intelligent surfaces (RISs) and causal-structure-enhanced asynchronous advantage actor–critic (A3C) reinforcement learning techniques. This framework aims to optimize resource allocation, thereby enhancing communication support within EV charging networks. Through the integration of RIS technology, which enables control over electromagnetic waves, and the application of causal reinforcement learning algorithms, the framework dynamically adjusts resource allocation strategies to accommodate evolving conditions in EV charging networks. An essential aspect of this framework is its ability to simultaneously meet real-world social requirements, such as ensuring efficient utilization of network resources. Numerical simulation results validate the effectiveness and adaptability of this approach in improving wireless network efficiency and enhancing user experience within the SIoT context. Through these simulations, it becomes evident that the developed framework offers promising solutions to the challenges posed by integrating the SIoT with EV charging networks.

Recent Progress in Electromagnetic Wave Absorption Coatings: From Design Principles to Applications

Recent Progress in Electromagnetic Wave Absorption Coatings: From Design Principles to Applications

Optimizing the electromagnetic wave absorption properties of core-shell Fe/FeN/Fe3C@GN nanoparticles by low-temperature NH3 plasma

Surface modification via low-temperature plasma has an extensive application prospect in different engineering fields due to its comprehensive merits in facilitating the introduction of functional groups and creating more heterogeneous interfaces. Herein, a simple high-temperature plasma method is developed to get novel multiple-phase nanocomposites of core-shell Fe/FeN/Fe3C@GN nanoparticles with bifunctional characteristics of microwave absorption (MA) and anti-corrosion. And then, we further investigate the MA properties of Fe/FeN/Fe3C@GN nanoparticles after low-temperature NH3 plasma etching. It is found that surface modification of Fe/FeN/Fe3C@GN nanoparticles can generate remarkable changes in specific surface areas, Raman features and MA properties of these nanocomposites. The Fe/FeN/Fe3C@GN nanoparticles after NH3 plasma etching possess excellent MA properties with an optimal reflection loss (RL) of −51.0 dB at an ultra-thin thickness of 1.9 mm with a low filling content of 30 wt% and the corresponding effective absorption bandwidth (EAB < −10 dB) up to 4.7 GHz (13.3–18.0 GHz). The fascinating MA properties of etched Fe/FeN/Fe3C@GN nanoparticles may be attributed to the cooperative effect of several points: (i) The NH3 plasma etch introduces a large number of polar functional groups, which can be regarded as the polarization center to produce more polarization loss; (ii) The appropriate dielectric loss and impedance matching achieve a good balance, and the abundant heterogeneous interface significantly enhances the polarization relaxation loss; (iii) The existence of hetero-nanostructure further improves the multiple reflections and scattering of the propagating microwaves. In addition, this work provides a new strategy for the design and fabrication of core-shell MA materials.