Spectral Range Research Articles

Recent Advancements in Nanomaterials for Near‐Infrared to Long‐Wave Infrared Photodetectors

AbstractNanomaterials have superior electronic, optical, and mechanical properties making them highly suitable for a range of applications in optoelectronics, biomedical fields, and photonics. Nanomaterials‐based IR detectors are rapidly growing due to enhanced sensitivity, wide spectral range, and device miniaturization compared to commercial photodetectors. This review paper focuses on the significant role of nanomaterials in infrared detection, an area critical for enhancing night vision and health monitoring technologies. The latest advancements in IR photodetectors that employ various nanomaterials and their hybrids are discussed. The manuscript covers the operational mechanisms, device designing, performance optimization strategies, and material challenges. This review aims to provide a comprehensive overview of the current developments in nanomaterial‐based IR photodetectors and to identify key directions for future research and technological advancements.

Assessment of submicron bone tissue composition in plastic-embedded samples using optical photothermal infrared (O-PTIR) spectral imaging and machine learning

Understanding the composition of bone tissue at the submicron level is crucial to elucidate factors contributing to bone disease and fragility. Here, we introduce a novel approach utilizing optical photothermal infrared (O-PTIR) spectroscopy and imaging coupled with machine learning analysis to assess bone tissue composition at 500 nm spatial resolution. This approach was used to evaluate thick bone samples embedded in typical poly(methyl methacrylate) (PMMA) blocks, eliminating the need for cumbersome thin sectioning. We demonstrate the utility of O-PTIR imaging to assess the distribution of bone tissue mineral and protein, as well as to explore the structure-composition relationship surrounding microporosity at a spatial resolution unattainable by conventional infrared imaging modalities. Using bone samples from wildtype (WT) mice and from a mouse model of osteogenesis imperfecta (OIM), we further showcase the application of O-PTIR spectroscopy to quantify mineral content, crystallinity, and carbonate content in spatially defined regions across the cortical bone. Notably, we show that machine learning analysis using support vector machine (SVM) was successful in identifying bone phenotypes (typical in WT, fragile in OIM) based on input of spectral data, with over 86 % of samples correctly identified when using the collagen spectral range. Our findings highlight the potential of O-PTIR spectroscopy and imaging as valuable tools for exploring bone submicron composition.

Synthesis and Optical Properties of Organic-Inorganic Hybrid [(18-Crown-6)K][MoOCl4(H2O)

Crown ether anchored organic-inorganic hybrid halides have been recently reported as interesting luminescent materials in the visible region of electromagnetic spectrum. Is it possible to develop such crown ether anchored hybrid materials for near infrared emission? Motivated by this question, we designed a new hybrid material, namely, [(18-Crown-6)K][MoOCl4(H2O)]. 18-Crown-6 ether bound with K+ form the cationic part [(18-Crown-6)K]+. The K+ of [(18-Crown-6)K]+ electrostatically interacts with Cl- of the anionic part [MoOCl4(H2O)]-, forming the hybrid crystal [(18-Crown-6)K][MoOCl4(H2O)]. It crystallizes in orthorhombic crystal system with Pnma space group. The Mo(V) possesses one d-electron (d1) in point group symmetry in the [MoOCl4(H2O)]- polyhedra. This electronic configuration leads to multiple spin-allowed transitions along with a ligand to metal charge transfer (LMCT) resulting into multiple optical absorption bands in the near UV-visible-near infrared (NIR) region. The lowest energy transition via 2E ( , )/2E ( ) 2B2 ( ) leads to NIR PL with peak at 952 nm, but with a poor intensity at room temperature.

Optical investigation of degradation of graphene oxide in alkaline environment: Evidence of two distinct photon-emitting phases in visible region.

In this work we show a procedure of treating of the graphene oxide in alkaline environment as a function of the treatment time in order to obtain novel structures with strong luminescence properties, water-stable, useful as potential replacement for critical raw materials employed as example in optical and optoelectronic devices or for diagnostic and therapeutic technology. These structures have distinct blue and green-luminescence properties which derived most likely from different structural conformations, one associable with that of carbon quantum dots (or as an alternative to that of the Oxidative Debris), the other, lighter and more similar to organic compounds, reported in literature as fulvic-like molecules, but whose nature has to be further investigated. We show that the lighter fraction has a dual mechanism of photoemission: the excitation-independent PL for excitation wavelength within 350 nm and the excitation-dependent component for excitation wavelength ranging in the visible spectrum. The PL dual behaviour could depend on fluorescent nanoclusters composed by specific organic fluorophores with a carbonaceous core. FTIR analysis shows reasonably the same functional groups unless of some difference discussed in the text, meanwhile UV–Vis and PL analysis clearly highlight two distinct emissions (450 nm and 530 nm) in the visible region of the electromagnetic spectrum. Excitation-dependent photoluminescence, water stability and organic fluorescent nanostructures are issues particularly required for application in the biological field but also in materials science.

Two-photon photodynamic therapy with curcumin nanocomposite

Two-photon photodynamic therapy (TP-PDT) offers an innovative approach to cancer treatment that utilizes near-infrared light to activate photosensitizers and generate reactive oxygen species (ROS) for targeted cancer cell elimination. TiO2-CUR-Sofast (TCS), which uses TiO2 nanoparticles and Sofast cationic polymer to modify curcumin (CUR), has demonstrated potential as a photosensitizer under visible light irradiation, addressing the limitations of CUR's narrow spectral range and low bioavailability. This study explores the utility of the two-photon technique to activate TCS within the infrared spectrum, aiming to enhance ROS production and penetration depth compared to traditional CUR. TCS exhibits a significantly higher ROS production at 900 nm excitation wavelength, approximately 6–7 times that of CUR, signifying a substantial increase in efficiency. In TP-PDT, TCS showed significant phototoxicity against HeLa and T24 cell lines compared to CUR. Furthermore, TCS's photodynamic efficacy is further confirmed by cell apoptosis and necrosis studies, where approximately 89 % of cells treated with TCS under 900 nm light irradiation were observed in an apoptosis/necrosis state. And the TP-PDT effect in deep tissue was simulated using pig skin. It shows that the two-photon excitation has a significant penetration depth advantage over the single-photon excitation. These results indicate that the two-photon PDT scheme of TCS has greater potential than the single-photon PDT scheme in the treatment of cancer, and provides an experimental foundation for the effective treatment of deep lesions.

Accurate Determination of the Uniaxial Complex Refractive Index and the Optical Band Gap of Polymer Thin Films to Correlate Their Absorption Strength and Onset of Absorption.

The advanced development of optoelectronic devices requires a methodical knowledge of the fundamental material properties of the key active components. Systematic investigations and correlations of such basic optical properties can lead to new insights for the design of more potent materials. In this perspective, we provide a systematic overview of the uniaxial anisotropic complex refractive indices and the absorption coefficients obtained by ellipsometry as well as the optical band gap energies derived from Tauc plots of six selected solution-processed polymer thin films. While the optical band gap energies are intentionally distributed over the visible spectral range, we found that the absorption strength of all polymer samples are grouped in a random distribution within a rather uniform range of values.

Colour Analysis of Sausages Stuffed with Modified Casings Added with Citrus Peel Extracts Using Hyperspectral Imaging Combined with Multivariate Analysis

Recycling citrus peel waste offers several significant contributions to sustainability, transforming what would otherwise be discarded into valuable resources. In this study, the colour of sausages stored for 16 days, with varying amounts of orange extract added to the modified casing solution, was evaluated using response surface methodology (RSM) and a hyperspectral imaging system within the spectral range of 350–1100 nm for the first time. To enhance model performance, spectral pre-treatments such as normalisation, first derivative, standard normal variate (SNV), second derivative, and multiplicative scatter correction (MSC) were applied. Both raw and pre-treated spectral data, along with colour attributes, were fitted to a partial least squares regression model. The RSM results indicated that the highest R2 value, 80.61%, was achieved for the b* (yellowness) parameter using a second-order polynomial model. The interactive effects of soy oil and orange extracts on b* were found to be significant (p < 0.05), and the square effects of soy oil on b* were significant at the 1% level. The identified key wavelengths for colour parameters can simplify the model, making it more suitable for practical industrial applications.

Planar waveguide to vertical mode couplers covering the visible to IR spectral range.

Planar 45o turning mirrors with metal coating embedded in SU8 polymer waveguides enable waveguide to vertical mode coupling across a broad range of wavelengths from the visible to IR. The fabrication of these 2.5D structures is achieved using relatively simple grayscale lithography in thin film resists, compatible with standard planar lithography methods. Mirror losses of <1 dB are measured from 516 -1630 nm, and direct coupling to single mode fibre is achieved.

Fourier Transform Infrared Spectroscopy (FTIR) for identification of sugar adulterants in mulberry molasses (pekmez)

Fourier Transform Infrared Spectroscopy (FTIR) and chemometrics were successfully used in this research in conjunction with the Attenuated Total Reflectance (ATR) technique to determine bulberry molasses (MM) canesugar adulteration. Mulberry molasses was adultered by incorporating two fructose syrups (FS), one glucose syrup (GS), one sucrose syrup (SS), and two specific high fructose corn syrups (HFCS). Calibration sets were developed for mulberry molasses by spiking sugar syrups. The actual percentage of adulteration linked to FTIR predicted results by partial least square (PLS). The preferred spectral range was 1184-944 cm-1 for prediction of adulteration levels of F20, F30, HFCS50, HFCS55 and 1090-950 cm-1 for sucrose. This method was employed to distinguish between mulberry molasses and adulterated samples. According to the findings, the FTIR technique is an accurate and affordable method that can rapidly detect sugar adulteration in mulberry molasses.

Effect of different metallic doping elements on the physical properties of iron oxide thin films

This study investigates the physical properties of pure and Co, Cr, Mn, and Ni-doped Fe2O3 thin films fabricated using spray pyrolysis techniques on glass substrates. The primary aim is to understand how doping influences the structural, optical, and dielectric properties of Fe2O3 thin films. The deposition parameters were kept constant for all samples, with a fixed dopant concentration of 3 weight percent (wt%). X-ray diffraction (XRD) analysis revealed a single diffraction peak indexed as (104), decreasing in crystallite size from 17.27 nm for the pure film to approximately 11.5 nm for all doped films. Field emission scanning electron microscopy (FE-SEM) images displayed non-homogeneous grain formation, characterized by an average grain size larger than the crystallite size, indicating agglomeration. The optical band gap value shifted from 2.54 eV for the pure film to higher values upon doping with various elements, signifying direct allowed transitions. Changes in refractive index dispersion with wavelength were observed based on the dopant type. The application of the Spitzer-Fan model revealed an increase in high-frequency dielectric constant upon doping compared to the pure film, varying across different dopants. Photoluminescence (PL) spectra recorded under excitation at 340 nm exhibited multiple emission peaks within the spectral range of 399 to 600 nm.

Nanoscale Imaging of Palladium-Enhanced Photocatalytic Reduction of 4-Nitrothiophenol on Tungsten Disulfide Nanoplates.

Two-dimensional (2D) dichalcogenides are modern nanomaterials with unique physical and chemical properties. These materials possess band gaps in the infrared and visible regions of the electromagnetic spectrum that can be tuned by their molecular composition. Excitons generated as a result of such light-matter interactions are capable of catalyzing chemical reactions in molecular analytes present on the dichalcogenide surfaces. However, the photocatalytic properties of such nanomaterials remain poorly understood. In the current study, we utilize tip-enhanced Raman spectroscopy (TERS) to examine photocatalytic reduction of 4-nitrothiophenol (4-NTP) to p,p'-dimercaptoazobisbenzene (DMAB) on tungsten disulfide (WS2) nanoplates and WS2 coupled with palladium nanoparticles (WS2@PdNPs). Our results indicate that although both WS2 and WS2@Pd were capable of reducing 4-NTP into DMAB, the metallic hybrid demonstrated much greater yield and rates of DMAB formation compared to WS2 nanoplate. These results indicate that coupling of catalytic metals to dichalcogenides could be used to enhance their catalytic properties.

Hyperspectral Imaging Combined with Machine Learning Can Be Used for Rapid and Non-Destructive Monitoring of Residual Nitrite in Emulsified Pork Sausages

The non-destructive and rapid monitoring system for residual nitrite content in processed meat products is critical for ensuring food safety and regulatory compliance. This study was performed to investigate the application of hyperspectral imaging in combination with machine learning algorithms to predict and monitor residual nitrite concentrations in emulsified pork sausages. The emulsified pork sausage was formulated with 1.5% (w/w) sodium chloride, 0.3% (w/w) sodium tripolyphosphate, 0.5% (w/w) ascorbic acid, and sodium nitrite at concentrations of 0, 30, 60, 90, 120, and 150 mg/kg, based on total sample weight. Hyperspectral imaging measurements were conducted by capturing images of the cross-sections and lateral sides of sausage samples in a linescan mode, covering the spectral range of 1000–2500 nm. The analysis revealed that higher nitrite concentrations could influence the protein matrix and hydrogen-bonding capacities, which might cause increased reflectance at approximately 1080 nm and 1280 nm. Machine learning models, including XGBoost, CATboost, and LightGBM, were employed to analyze the hyperspectral data. XGBoost demonstrated the best performance, achieving an R2 of 0.999 and a root mean squared error of 0.095, highlighting its high predictive accuracy. This integration of hyperspectral imaging with advanced machine learning algorithms offers a non-destructive and real-time method for monitoring residual nitrite content in processed meat products, noticeably improving quality control processes in the meat industry. Additionally, real-time implementation in industrial settings could further streamline quality control and enhance operational efficiency. Further research should focus on validating these findings with larger sample sizes and more diverse datasets to ensure robustness.

Photoluminescence properties of Mn2+-activated red-emitting phosphors with superior thermal stability for backlighting display applications

The red-emitting phosphors, Na2Mg1-x(PO3)4:xMn2+ with concentrations ranging from 0.01 to 0.11, have been successfully synthesized using a simple solid-state method. The as-synthesized phosphors are crystallized in an orthorhombic structure. The luminescence mechanism of Mn2+ ions in Na2Mg(PO3)4 lattice has been deeply explained using the Tanabe-Sugano (T-S) energy level diagram for the d5 electron configuration. The typical photoluminescent emission (PL) and photoluminescent excitation (PLE) spectra were measured. Several excitation peaks in the spectral range of 250–550 nm on the PLE spectrum and a strong emission peak at 613 nm indicate that the as-synthesized phosphors can be effectively excited using ultraviolet (UV) and near-UV LED chips. Several photometric characteristics were measured, such as the Commission International de'LEclarirage (CIE) chromaticity coordinate (x, y), color purity (CP), and correlated color temperature (CCT), corresponding to the concentration-dependent PL spectra. Furthermore, the thermal stability of the Na2Mg1-x(PO3)4:xMn2+ phosphors was investigated through temperature-dependent PL spectra and decay curves from 10 to 500 K. All results confirm that the as-synthesized red-emitting phosphors exhibit excellent thermal stability, which are attractive characteristics for white light emitting diodes (W-LEDs) applications.

Perylene-Embedded Helical Nanographenes with Emission up to 1010 nm: Synthesis, Structures, and Chiroptical Properties.

Near-infrared (NIR) circularly polarized absorbing or emitting materials offer distinct advantages over their visible-light counterparts and have attracted considerable interest across various fields. Materials exhibiting NIR chiroptical properties with high fluorescence quantum yields (ΦF) are particularly rare. In this study, we report the synthesis of a series of helical nanographenes (1, 2, 3, and 4), where perylene is fused with one to four hexa-peri-hexabenzocoronene (sub) units by a strategy involving Diels-Alder cycloaddition followed by a Scholl reaction. X-ray crystallographic analysis confirmed their structures, revealing helicene moieties integrated into a highly contorted framework. Benefiting from a similar distribution pattern of frontier molecular orbitals to perylene and extended π-conjugation, compounds 1-4 demonstrate respectable ΦF values of 31.9 %, 15.0 %, 13.7 %, and 6.5 %, respectively, with emission maxima reaching up to 1010 nm. Their enantiopure forms, isolated by preparative chiral HPLC, exhibit distinct circular dichroism signals and circularly polarized luminescence across a broad spectral range, extending from the ultraviolet to the NIR.

A new noise source modelling tool for shooting sheds using novel edge diffraction methodology

Shooting ranges may have a shooting shed to protect the shooter against weather and to reduce noise to neighbours. The noise reduction depends on both shielding and reflection effects and can be difficult to measure due to complex surroundings. In this paper, a new tool will be presented to predict the influence of the shed on the emitted noise. The tool produces a substitute source which models the combined effect of the weapon and the shed, meant for efficient use in regular noise mapping software. It combines advanced edge diffraction methodology for the body of the shed, with a boundary element solution for minor areas representing openings or absorbers in the shed. With this approach we cover the full spectral range (up to 10 kHz) at low calculation time, with an intended precision comparable to traditional models based on boundary element methods. The tool is also intended for opposite use, by reciprocity, for instance to model quietness on the backside of a house by a road.

28/38 GHz compact rhombic-shaped antenna for future generations of mobile communications

ABSTRACT It is mandatory for the modern antennas to be designed to operate in the millimetre-wave (mm-wave) range of the electromagnetic spectrum for future generations of mobile communication requires multiband operation of a single antenna. The present work proposes a dual-band antenna to operate at 28 and 38 GHz . The design stages of the proposed antenna and examples of the parametric study performed to arrive at the final antenna design are demonstrated and discussed in detail. The proposed antenna is constructed as a main patch with parasitic element that is capacitively coupled to the main patch through a narrow slot. The main patch is a rhombic-in-shape and excited through a microstrip live with inset feed. This rhombic shaped patch antenna is originally designed to operate at 28 GHz . To achieve the dual-band operation, the geometry of the main patch is modified and is loaded by a parasitic element. The antenna is fabricated for experimental assessment through measurement of the antenna impedance, radiation patterns, maximum gain and radiation efficiency. The proper operation at 28 and 38 GHz is confirmed by experimental verification of the simulation results. Both the simulation and measurements show that the proposed antenna has 50 Ω -matched impedance over the frequency bands 27.7 − 28.4 GHz and 37.7 − 38.4 GHz . The proposed antenna has been designed to enhance the communications system performance when used in the mobile networks through noise rejection by limiting the operation within relatively narrow bands around the resonant frequencies. The values of the maximum gain obtained at 28 and 38 GHz are 6.98 and 8.8 dBi , respectively. The radiation efficiencies of the proposed antenna are 89 % and 87 % , respectively, and the total efficiency is also calculated.

Application of Laser-Induced Breakdown Spectroscopy to quantify the changes in plasma characteristics in calcite-precipitated soils

The changes in calcium carbonate precipitation of modified soil by Enzyme Induced Calcite Precipitation (EICP) were investigated using Laser-Induced Breakdown Spectroscopy (LIBS). This experiment enabled elemental composition analysis of the soil samples. The plasma electron density and temperature were also extracted from the collected spectra of distinct soil samples i.e., W1 and W2 treated with EICP. The type of the crystal of CaCO3 deposited during the treatment process was investigated using scanning electron microscopy (SEM) and X-ray diffraction (XRD) tests. This research was conducted by utilizing an Nd: YAG laser with a wavelength of 532 nm, a pulse duration of 6 ns, and an energy of 25 mJ, from where the plasma temperature and electron density of modified soil throughout several treatment cycles were analyzed. The spectra were collected from different locations within the sample and the spectral range considered for the study was 370 nm-800 nm. The plasma electron density and plasma temperature determined using LIBS spectral data increase with the increase in the treatment cycle. With the increase in the treatment cycle, the deposition of CaCO3 was found to increase and correspondingly plasma temperature increased by 220 % for soil W1 and 117.3 % for soil W2. A similar rise in plasma electron density was noticed at the highest cycle of the treatment process; plasma electron density is augmented by 106.4 % for W1 and 21.50 % for W2. This investigation of the LIBS spectral data information indicates a positive correlation between the number of treatment cycles and the plasma temperature, meaning that as the treatment cycles rise, the plasma temperature also increases indicating a larger deposition of CaCO3. The findings are valuable in the domain of geotechnical engineering, where lasers are extensively employed for the examination of the soil profile and can prove to be a useful method for the characterization of the modified soils.

Color-Tunable Lead Halide Perovskite Single-Mode Chiral Microlasers with Exceptionally High glum.

Chiral microlasers hold great promise for optoelectronics from integrated photonic devices to high-density quantum information processing. Despite significant progress in lead-halide perovskite emitters, chiral lasing with high dissymmetry factors (glum) has not yet been realized. Here, we demonstrate chiral single-mode microlasers with exceptional stability and tunable emission across the visible range by combining CsPbClxBr3-x perovskite microrods (MRs) with a cholesteric liquid crystal (CLC) layer. The MRs lase via a whispering gallery mode (WGM) microcavity and confer chirality through the encapsulated CLC layer, thus exhibiting circularly polarized lasing with dissymmetry factors reaching 1.62. Importantly, we demonstrate wavelength-tunable high dissymmetry chiral lasers in a broad spectral range by tuning the halide composition and using CLC layers with the desired photonic bandgap (PBG). This facile approach to generate chiral lasing not only is applicable to semiconductor nano- and microcrystals but also paves the way for potential integration into nanoscale photonic devices.

Enhancement of photoresponse for InGaAs infrared photodetectors using plasmonic WO3-x/CsyWO3-xnanocrystals.

Fast and accurate detection of light in the near-infrared (NIR) spectral range plays a crucial role in modern society, from alleviating speed and capacity bottlenecks in optical communications to enhancing the control and safety of autonomous vehicles through NIR imaging systems. Several technological platforms are currently under investigation to improve NIR photodetection, aiming to surpass the performance of established III-V semiconductor p-i-n (PIN) junction technology. These platforms include in situ-grown inorganic nanocrystals and nanowire arrays, as well as hybrid organic-inorganic materials such as graphene-perovskite heterostructures. However, challenges remain in nanocrystal and nanowire growth, large-area fabrication of high-quality 2D materials, and the fabrication of devices for practical applications. Here, we explore the potential for tailored semiconductor nanocrystals to enhance the responsivity of planar metal-semiconductor-metal (MSM) photodetectors. MSM technology offers ease of fabrication and fast response times compared to PIN detectors. We observe enhancement of the optical-to-electric conversion efficiency by up to a factor of ~2.5 through the application of plasmonically-active semiconductor nanorods and nanocrystals. We present a protocol for synthesizing and rapidly testing the performance of non-stoichiometric tungsten oxide (WO3-x) nanorods and cesium-doped tungsten oxide (CsyWO3-x) hexagonal nanoprisms prepared in colloidal suspensions and drop-cast onto photodetector surfaces. The results demonstrate the potential for a cost-effective and scalable method exploiting tailored nanocrystals to improve the performance of NIR optoelectronic devices.

Manipulating four-photon absorption of ZnO via Ga doping.

Multi-photon absorption in the second near-infrared (NIR-II) regime has attracted extensive attention due to biological imaging and frequency-upconverted lasing applications. We report the dispersion of four-photon absorption (4 PA) response in pristine and Ga-doped ZnO single crystals over the spectral range 1180-1350 nm. Femtosecond Z-scan results demonstrate that Ga doping can significantly enhance the 4 PA coefficient β4 of ZnO. Interestingly, the wavelength dependency of β4 in Ga-doped ZnO shows a strong resonance around 1215-1250 nm, which is correlated with the PL peak of Ga-doped ZnO at 405 nm. Femtosecond pump-probe measurements validate that Ga doping has no profound impact on the ultrafast carrier relaxation of ZnO, indicating Ga doping leads to a shallow state rather than a deep trap within the bandgap. The possible mechanism of 4 PA enhancement induced by degeneracy with multi-photon absorption resonance to the Ga-doped state is discussed. Our results verify the strong potential of Ga-doped ZnO with tunable nonlinear optical properties as a promising candidate for nonlinear optical and nanophotonic devices in the NIR-II region.