Electromagnetic Properties Research Articles

Flat space spinning massive amplitudes from momentum space CFT

We discuss the flat space limit of AdS using the momentum space representation of CFT correlators. The flat space limit involves sending the AdS radius and the dimensions of operators dual to massive fields to infinity while also scaling appropriately the sources of the dual operators. In this limit, d-dimensional CFT correlators become (d + 1)-dimensional scattering amplitudes. We exemplify our discussion with the computation of the flat-space limit of the CFT 3-point function of a conserved current, a non-conserved charged vector operator and its conjugate. The flat-space limit should yield the scattering amplitude of an Abelian gauge field with two massive vector fields. This scattering amplitude computes the electromagnetic form factors of the electromagnetic current in a spin-1 state, and these form factors encode the electromagnetic properties of the massive vector field (charge, magnetic moment and quadruple moment). In terms of the CFT, the flat-space limit amounts to zooming in the infrared region of the triple-K integrals that determine the 3-point function, while also scaling to infinity the order of (some of) the Bessel functions that feature in the triple-K integrals. In this limit the triple-K integral becomes proportional to the energy-preserving delta function, and the flat space limit correctly yields the corresponding flat space scattering amplitude in complete detail.

Square & H metasurfaces for SPR Increasing in long Wave-IR absorber

In the long-wave infrared (LWIR) spectrum, this paper suggests an electromagnetic (EM) waveband absorber design based on metamaterials. Germanium, gold, and magnesium oxide layers are arranged in a layered structure from top to bottom in the suggested model. Our proposed metamaterial structure’s upper surface is composed of metallic metasurfaces with H and square forms from various studies. The finite element method is used to evaluate the metamaterials’ electromagnetic properties in terms of absorbance and reflectance. It is observed that there is a particular size of the metamaterial at which extremely localized electromagnetic resonance occurs. Quantitative findings indicate that the suggested metamaterial design’s average absorption reaches 90 % in the 10 μm to 14 μm range across a wide variety of incidence angles (00 to 400 & 00 to 800) for both transverse electric (TE) and transverse magnetic (TM) polarization. It is evident from these data that the suggested model configuration has broad potential applications in manyoptoelectronic fields of study.

Design, simulation and manufacture of a flexible frequency selective surface based on aramid/carbon fiber woven fabric

Frequency selective surfaces (FSSs) are significant for the efficient and accurate transmission of microwave signals due to its ability to selectively shield electromagnetic (EM) waves of different frequencies. In some special scenarios, mechanical properties are vitally required. Herein, a flexible frequency selective fabric (FSF) is proposed. Different from traditional FSSs or reported FSFs, aramid/carbon fiber woven fabric serve as the flexible substrate in which carbon fiber provides functionality instead of metallic materials, and patches made of carbon fiber prepreg are periodically applied for property reinforcement. Equivalent circuit model is used to guide the basic determination of patch’s geometry, and it is further optimized via full-wave simulation software HFSS. A simulation model that reasonably reflect the correlation between structure and frequency-selection characteristic is provided, and structural factors affecting the characteristic are analyzed and discussed. Further, an FSF sample is prepared and its frequency response is measured. Measurement revealed the FSF selectively shields EM waves in the frequency range of 8.9 GHz to 11.4 GHz, and is of the bandpass-bandstop-bandpass characteristic. Benefit from EM property and flexibility, the proposed FSF has advantages in applications pursue lightweight, high strength, and require excellent EM functionality, such as aerospace and structure-EM function integrated products.

Investigation of the Effect of Alloying Element Equilibrium Relationship on the Electromagnetic Microwave Absorption Properties of Nano FeNi Magnetic Particles

AbstractIn order to effectively comprehend the impact of alloying element equilibrium relationship of binary nano‐magnetic particles on their electromagnetic wave absorption performance, four sets of binary nano FeNi magnetic particles with Fe:Ni alloy ratios of 2:8, 4:6, 6:4, and 8:2 were prepared with liquid‐phase reduction and the microstructure, static magnetic properties, and electromagnetic wave absorption performance of the particles were studied. The results show that the nano FeNi magnetic particles exhibit a spherical geometric structure, with a decrease in crystallinity as the Fe:Ni alloy ratio increases. The remanence and coercivity initially increase and then decrease with the increased Fe:Ni alloy ratio, with a 270 % decrease in saturation magnetization intensity as the alloy ratio changes from 2:8 to 8:2. With the increase in the Fe:Ni alloy ratio, the real and imaginary parts of the complex permittivity exhibit a decreasing trend, while the real part of the magnetic permeability decreases with increasing frequency. Aside from the 8:2 Fe:Ni alloy ratio, significant polarization relaxation losses were observed in the prepared magnetic particles, with eddy current losses was not the main mechanism of magnetic losses. The attenuation constant shows a peak at high frequencies, and the impedance matching performance increases with the increase in the Fe:Ni alloy ratio. When the Fe:Ni alloy ratio changes from 2:8 to 8:2, the minimum reflection loss decreased by 3340 %, and at a thickness of 2.1 mm and a frequency of 12 GHz, the FeNi alloy particles with a ratio of 2:8 exhibited a minimum reflection loss of −17.2 dB with an effective absorption bandwidth of 1.92 GHz.

Advances in Carbon Microsphere-Based Nanomaterials for Efficient Electromagnetic Wave Absorption.

Carbon microspheres have indeed shown great promise as effective materials for absorbing electromagnetic waves, particularly in microwave applications. Their unique properties, such as high surface area, porosity, and electronic characteristics, make them ideal candidates for addressing the growing concerns around electromagnetic pollution from electronic devices. By leveraging the properties of these materials, we can work toward creating more efficient and sustainable electromagnetic wave absorption technologies. Recent efforts have focused on synthesizing and investigating carbon microsphere-based electromagnetic wave-absorbing nanomaterials with the ambition of achieving the desired attributes of being thin, light, wide, and robust. This Review first delves into the detailed mechanism of electromagnetic wave absorption, followed by an elucidation of the preparation methods for carbon microsphere-based nanomaterials. Furthermore, it systematically outlines the common methods and strategies employed to improve the microwave absorption capabilities of carbon microspheres, including chemical vapor deposition, emulsion polymerization, hydrothermal methods, and template methods. Lastly, it outlines the challenges encountered by carbon microsphere-based electromagnetic wave absorption nanomaterials and outlines their prospects, mainly morphology change, component hybridization, and elemental doping. This Review aims to provide valuable insights into the creation of carbon microsphere nanomaterials with excellent electromagnetic wave absorption properties.

Development of an innovative patch antenna design and implementation using ENG materials for health care systems and 5G networks

The object of this study is a new design of an overhead microstrip antenna, including Epsilon Negative (ENG) metamaterials and L-shaped parasitic overlays aimed at achieving dual-band operation and improving the performance of modern wireless communication systems. The research is aimed at solving the problem of limited bandwidth and dual-band functionality in conventional antenna designs. This study solves the problem of limited bandwidth and dual-band functionality in conventional microstrip patch antenna designs, which are crucial for modern wireless communication systems. The inclusion of L-shaped parasitic overlays effectively expands the bandwidth in each frequency range. The results indicate significant improvements: at the upper resonant frequency, a 10 dB return loss bandwidth of 27.84 % (2.88–3.81 GHz) and a 3 dB axial ratio bandwidth of 5.05 % (2.90–3.05 GHz) are achieved, while at the lower resonant frequency, a return loss bandwidth is 10 dB, which is 6.11 % (2.22–2.36 GHz). These improvements indicate a significant increase in antenna performance compared to conventional designs, which is confirmed by comparing the simulation results with the measurement results. Distinctive features contributing to these results include the use of ENG metamaterials, which improve electromagnetic properties and signal propagation; vertical transitions, which provide efficient dual-band operation; and L-shaped parasitic overlays, which significantly expand bandwidth. These characteristics combine to eliminate the limitations of traditional designs, which makes the proposed antenna suitable for use in a wide frequency range in modern wireless communication systems.

Air-microwave simultaneously induced carbon fiber surface oxidation and magnetism adjustment by CoOx nanoparticles rapid assembly for interface enhancement and electromagnetic wave absorption of its composites

It is a significant challenge to develop a fast carbon fiber (CF) surface modification method, especially for the high strength electromagnetic wave (EMW) absorption materials. Herein, magnetic CoOx nanoparticles are successfully synthesized and uniformly assembled on CF surface with high oxygen-containing groups by rapid ambient microwave carbon thermal shock (MCTS). The presence of oxygen defect sites on CF surface promotes CoOx nanoparticles nucleation. The number of oxygen defects and the types of magnetic nanoparticles on the CF surface effectively adjust the surface chemical activity and the electromagnetic properties of CF, which is conducive to improving the EMW absorption performance and interface compatibility of the CoOx nanoparticles modified CF reinforced polyamide 6 (CO@CF/PA6) composites. Compared with CO@CF-0 s/PA6, the tensile strength and modulus of CO@CF-3.5 s/PA6 composite are increased by 18.1 % and 18.6 %, respectively. It also displays a minimum reflection loss value (−59.9 dB) at a thinner thickness of 1.9 mm while the maximum effective absorption bandwidth reaches 5.02 GHz with a thickness of 1.8 mm. Its radar cross-section values exhibit less than −10 dBm2 at all tested detection angles. This rapid MCTS shows great potential for large-scale production of CF modification with low-cost, efficient and environmentally friendly process.

A Perspective of Tailoring Dielectric Genes for 2D Materials Toward Advanced Electromagnetic Functions

Abstract2D materials and their composites with electromagnetic properties are becoming increasingly popular. Obtaining insight into the nature of electromagnetic (EM) response manipulation is imperative to guide scientific research and technological exploitation at such a critical time. From this perspective, the dielectric genes of 2D material hybrids have been highlighted based on the recent literature. This endows an unlimited possibility of manipulating the EM response, even at elevated temperatures. The definitions and criteria of dielectric genes toward 2D material hybrids and composites are systematically clarified and summarized. The dielectric gene categories are successfully discriminated, including the conduction networks, intrinsic defects, impurity defects, and interfaces in the composite, and their temperature evolution is revealed in detail. More importantly, tuning strategies for microwave absorption, electromagnetic shielding effectiveness, and expanded electromagnetic functions are thoroughly discussed. Finally, significant predictions are provided for multispectral electromagnetic functions, and future applications of multifunctional exploration are anticipated. Dielectric genes will open an unexpected horizon for advanced functional materials in the coming 5G/6G age, providing a significant boost to promoting environmental electromagnetic protection, electromagnetic devices, and next‐generation smart devices.

Customized Pore Creation Strategies for Hyperelastic, Robust, Insulating Multifunctional MXene Aerogels for Microwave Absorption.

The construction of heterogeneous microstructure and the selection of multicomponents have turned into a research hotspot in developing ultralight, multifunctional, high-efficiency electromagnetic wave absorbing (EMA) materials. Although aerogels are promising materials to fulfill the above requirements, the increase in functional fillers inevitably leads to the deterioration of intrinsic properties. Tuning the electromagnetic properties from the structural design point of view remains a difficult challenge. Herein, we design customized pore creation strategies via introducing sacrificial templates to optimize the conductive path and construct the discontinuous dielectric medium, increasing dielectric loss and achieving efficient microwave absorption properties. A 3D porous composite (MEM) was crafted, which encapsulated an EVA/FeCoNi (EVA/MNPs) framework with Ti3C2Tx MXene coating by employing a direct heated cross-linking and immersion method. Controllable adjustment of the conductive network inside the porous structure and regulation of the dielectric character are achieved by porosity variation. Eventually, the MEM-5 with a porosity of 66.67% realizes RLmin of -39.2 dB (2.2 mm) and can cover the entire X band. Moreover, through off-axis electronic holography and the calculation of conduction loss and polarization loss, the dielectric property is deeply investigated, and the inner mechanism of optimization is pointed out. Thanks to the inherent characteristic of EVA and the porous structure, MEM-5 showed excellent thermal insulating and superior compressibility, which can maintain 60 °C on a 90-100 °C continuous heating stage and reached a maximum compressive strength of 60.12 kPa at 50% strain. Conceivably, this work provides a facile method for the fabrication of highly efficient microwave absorbers applied under complex conditions.

Enhanced microwave absorption in GaFeO3 coated CoFe2O4 nano-hollowsphere

As a multiferroic material with substantial magnetoelectric coupling, gallium ferrite (GaFeO3, GFO) has been intensively studied in recent years. Cobalt ferrite (CoFe2O4, CFO) nano-hollowsphere (NHS), on the other hand, is found to be an efficient material for electromagnetic (EM) wave absorption. In this work, a composite consisting of magnetostrictive CFO NHS coated with GFO nanoparticles [(1−x)CoFe2O4 – xGaFeO3, for x = 0.0, 0.9, 0.7, 0.5, 0.3, and 1.0] is prepared as an effective strategy to develop highly efficient microwave material. The EM wave absorption properties of the samples are thoroughly investigated across a widely used frequency range of 1–20 GHz. Remarkable performance of the x = 0.7 composite is evident by its effective bandwidth of approximately 3 GHz and a minimum reflection loss of approximately −63.26 dB. Moreover, the excellent impedance matching, with |Zin/Z0| ≅ 1.00, observed in the aforementioned composite, satisfies well with the required characteristics for a superior microwave absorber. Therefore, a core–shell nanostructure consisting of CFO NHS as core and GFO with optimized shell thickness can be used successfully in microwave devices.

Multifunctional and high-performance electrothermal films based on carbon black/Ag nanowires/graphene composites

Fabricating high-conductive composites and constructing highly conductive networks are crucial for high-performance electrothermal film. In this study, an Ag nanowires/graphene (Ag/G) composite synthesized by liquid-phase exfoliation and in-situ photoreduction is mixed with carbon black (CB) to form a composite conductive ink, and a CB/Ag/G composite electrothermal film with a point-line-plane three-dimensional microstructure is obtained via blade coating process. Both the addition of Ag nanowires and a subsequent compression rolling treatment induce the establishment of the effective conductive network in the film, endowing it with an outstanding conductivity of 399.4 S cm−1. The film reaches a Ts of 204 °C with an input voltage of 3.0 V, and is successfully applied in water heating and de-icing, demonstrating its extraordinary electrothermal performance and vast potential for practical applications. The film is also used as an electromagnetic shielding film and heat dissipation substrate, showing exceptional electromagnetic shielding (42.5 dB) and heat dissipation properties.

Construction of polymer-derived double transition metal compound/carbon matrix nanocomposites for efficient electromagnetic wave absorber

As typical dielectric materials, transition metal compounds have a broad potential in the field of stealth, but their application is still hampered by poor conductivity. In this study, based on the mechanism of electrostatic self-assembly of heteropolyacids and organic ligands, the electrostatic structures obtained after the introduction of different heteropolyacids into the conductive phase pyrrole are carbonized. On the one hand, the as-prepared transition metal compounds/carbon matrix nanocomposites produce synergistic effects and optimize impedance matching, and on the other hand, the formation of the abundant heterogeneous interfaces as well as the doping of the N, P heteroatoms induce the generation of interfacial polarisation and dipole polarisation, all of which provide the opportunities to produce composites with enhanced electromagnetic wave absorption properties. Unsurprisingly, the best synthesised sample, Mo2C/W2C/NPC, exhibits a significantly improved electromagnetic wave absorption performance, with an effective bandwidth of 5.7 GHz at a matched thickness of 2.5 mm, where the minimum reflection loss value of −54.5 dB is also achieved. The total effective bandwidth of the Mo2C/W2C/NPC-35 wt% is up to 10.5 GHz (7.3–17.8 GHz) via adjusting the matching thickness in the range of 1.7–3.5 mm. Therefore, this study reflects that dual transition metal compound/carbon based composite wave-absorbing materials provide a new material basis for the construction of high-performance absorption materials.

A novel high-entropy perovskite Ba(Zn0.2Yb0.2Ta0.2Nb0.2V0.2)O3 ceramic with excellent Electromagnetic wave absorption properties

In order to solve the increasingly serious electromagnetic wave pollution, the preparation of high-performance electromagnetic wave absorbing (EWA) materials has been very urgent. High-entropy ceramics have a good prospect in the field of EWA materials due to the unique effect brought by its multi-component elements. Therefore, in this study, the composition of high-entropy ceramics was designed by utilizing the Goldschmid tolerance factor. Then the high-entropy perovskite Ba(Zn0.2Yb0.2Ta0.2Nb0.2V0.2)O3 ceramic (BZO) with high EWA performance was prepared by high-temperature solid-phase method. The EWA mechanism of the material was explored based on the phase composition, microstructure and electromagnetic parameters of the samples. Good impedance matching and better attenuation ability were obtained for BZO-1100 due to the crystallographic transition and interface increase. As a result, BZO-1100 achieves excellent EWA performance at a thickness of 2.12 mm, with a minimum reflection loss (RLmin) of −54.09 dB and an effective absorption bandwidth (EAB) of 2.81 GHz in the X-band. In addition, the possibility of the practical application of the BZO high-entropy ceramics is verified by electric field distribution simulations and RCS simulations. This study provides a valuable reference for the design of high-performance high-entropy perovskite ceramic absorber materials.

Biological template hydrothermal synthesis of hollow La-doped one-dimensional CaMnO3 fibers and their enhanced microwave absorption performance

The advancement of military technology, 5G communication, and electronic equipment has increased the demand for efficient electromagnetic wave absorption materials. Calcium manganate (CaMnO3) is a commonly used dielectric absorber due to its excellent dielectric polarization effect. However, traditional ceramic materials like CaMnO3 have low conductivity, making it difficult to achieve impedance matching and electromagnetic loss simultaneously. In this work, to address this issue and create ideal wave-absorbing materials, one-dimensional La-doped CaMnO3 materials were synthesized using a simple biological template hydrothermal method. By studying the relationship between doping content and electromagnetic parameters, it was found that the La-doped CaMnO3 material exhibited excellent electromagnetic wave absorption properties, with a minimum reflection loss (RLmin) of −73.62 dB and a maximum effective absorption bandwidth of 3.3 GHz in the X-band. The introduction of La elements, which have different electronegativities from Ca ions, altered the electron cloud distribution in the sample, leading to the formation of electric dipoles that disrupt charge distribution and dissipate electromagnetic waves. The dielectric loss in fibrous La-doped CaMnO3 is mainly due to interfacial polarization. The fibrous structure allows for increased contact area with the air medium, while the porous structure introduces air bubbles that alter the dielectric properties between the sample and the air medium. This not only enhances impedance characteristics to some extent but also triggers interfacial polarization. Both of these factors help improve the material's ability to absorb electromagnetic waves. The successful creation of this one-dimensional absorbing material opens up possibilities for developing new one-dimensional absorbing materials using a straightforward method.

Modulating Electrical Properties of Ti64/B4C Composite Materials via Laser Direct Manufacturing with Varying B4C Contents.

The modulation of electrical properties in composite materials is critical for applications requiring tailored electrical functionality, such as electromagnetic shielding and absorption. This study focuses on Ti64/B4C composites, a material combination promising enhanced electromagnetic properties. Laser direct manufacturing (LDM) was utilized to fabricate coaxial samples of Ti64 blended with TiB and TiC in various mass ratios, with sample thicknesses ranging from 0.5 mm to 3.5 mm. The electrical characterization involved assessing the dielectric and magnetic permeability, as well as impedance and reflectance, across a frequency spectrum of 2 to 18 GHz. The result reveals that TiC, when incorporated into Ti64, exhibits strong dielectric polarization and achieves a reflectivity as low as -40 dB between 7 and 14 GHz. Conversely, TiB demonstrates effective electromagnetic absorption, with reflectivity values below -10 dB in the frequency band of 8.5 to 11.5 GHz. The study also notes that a lower B4C content enhances electronic polarization and increases the dielectric coefficient, while higher contents favor ionic polarization. This shift can lead to a timing mismatch in the establishment of electron and ion polarization, resulting in a decreased dielectric coefficient. In addition, adjusting the B4C content in Ti64/B4C composites effectively modulates their electrical properties, suggesting a strategic approach to designing materials for specific electromagnetic functions.

The dynamic resistance of muti-layer conductor on round core cables for SMES systems

The conductor on round core (CORC) cables with multi-layer structure show great potential for superconducting magnetic energy storage (SMES) because of their low AC losses and large current carrying capacity. The dynamic resistance is an important electro-magnetic property of CORC cables for SMES. Considering that experimental results of multi-layer CORC cables are usually difficult to obtained, numerical model is an efficient method to demonstrate their electro-magnetic properties. In the work, a numerical model is proposed to illustrate the dynamic resistance of the multi-layer CORC cables. Then, an analytical model using method of rotating magnetic field is proposed to provide mathematical expressions for computing the dynamic resistance, which verifies the numerical model. According to the numerical model, the impacts of DC current and AC magnetic field on dynamic resistances of the multi-layer CORC cables are investigated respectively. The simulation clearly illustrates the dynamic resistance characteristics of CORC cables, showing dynamic resistances and currents in individual layers. This study can serve as a valuable guidance for the implementation of multi-layer CORC cables in SMES systems.

Evolution of high temperature oxidation properties of SiCf/SiCN composites with BN interphase

In this study, SiC/SiCN composites with BN interphase were prepared using chemical vapor infiltration (CVI) and polymer infiltration and pyrolysis (PIP) methods. The evolution and related mechanisms of mechanical and microwave absorption properties of the composites after oxidation at 800 °C, 1000 °C, 1200 °C, and 1400 °C were investigated. The results showed that with the elevating of oxidation temperature, the flexural strength of SiC/SiCN composites gradually decreased, with a retention rate of 56.7 % after oxidation at 1400 °C. The main reasons for the deterioration of mechanical properties were the changes in the crystal structure of SiC fibers under high-temperature conditions and the formation of brittle SiO2 phases on the surface and interior of the SiCN matrix. With the increase in oxidation temperature, the microwave absorption performance of the composites showed an enhancing trend. The main reasons were that after oxidation treatment, the reduction of free carbon content and the formation of SiO2 film layers from the oxidation of SiC and SiCN led to a decrease in the complex permittivity of the composites, resulting in better impedance matching and dielectric loss capabilities. The contributions of BN interphase to stress dispersion, interface polarization, and oxidation protection significantly enhance the mechanical and electromagnetic absorption properties of the composites. Therefore, SiC/SiCN composites are high-temperature structural microwave absorbing materials with great application prospects.

Electromagnetical and ultrasonic characterizations of concretes subjected to internal swelling reactions

Among pathologies of reinforced concrete structures, internal swelling reactions (ISR), including alkali-aggregate reaction and delayed ettringite formation, are at the origin of cracks and major disorders due to rebar corrosion. Visual evaluation of crack density combined to non-destructive testing techniques can be used to characterize the global swelling and then give some structural diagnosis. For the last ones, an intermediate step (assimilated to a calibration step) can be performed at laboratory to evaluate the sensitivity of electromagnetic, electrical and ultrasonic properties of concretes subject to ISR.This present study focuses on such characterizations of concrete samples presenting different levels of ISR and for several water content. Numerous samples have been extracted from mock-ups representative of two massive concrete structures, affected one by alkali-aggregate reaction and the other by delayed ettringite formation, and conditioned in homogeneous and controlled conditions. After describing the experimental campaign, results are shown and commented.

Effect of silicon carbide powder on asphalt material properties and microwave-induced self-healing

Silicon carbide (SiC) powder, an excellent microwave-absorbing material, can serve as a filler in asphalt mixtures. This study compares the particle size distribution, phase composition, pore structure, specific surface area, and electromagnetic properties of SiC powder and limestone powder. Asphalt mastic and mixtures were prepared with SiC powder replacing mineral powder at ratios ranging from 0 % to 60 %. The study examines how differences in particle size gradation, mineral composition, pore structure, and specific surface area contribute to deformation resistance and improve mechanical properties through micro-level interlocking and cementation. Electromagnetic parameter variations affect microwave heating performance, with uniform distribution of absorbing fillers ensuring heating homogenization. SiC powder also enhances the self-healing index, reaching 74.4 %, and maintaining a maximum healing index of 68.1 % after four damage-healing cycles. These findings support the practical application of SiC powder in asphalt concrete, enhancing maintenance efficiency and advancing microwave heating for self-healing and hot recycling.

Rietveld analysis and cation distribution of Co substituted Ni–Zn ferrite nanoparticles

This study investigates the cation distribution in Co-substituted Ni–Zn ferrite nanoparticles synthesized via the sol-gel auto-combustion method. The research aims to understand the modifications in cationic distributions at the nanoscale compared to bulk counterparts and their impact on electromagnetic properties. Rietveld structural analysis, lattice constant determination, and magnetic moment measurements were employed to analyze the nanoparticles. The results reveal a single-phase spinel structure with cubic symmetry, crystallite sizes between 26.2 and 36.4 nm, and saturation magnetizations ranging from 50 to 68 emu/g. Results and calculated cation distributions of these ferrite nanoparticles were evaluated in terms of compositional modifications, particle sizes, and related inversion degree parameters. The study confirms the cation distributions based on X-ray and magnetic data, highlighting the importance of cationic inversions in designing nanoscale ferrites with improved electromagnetic characteristics for electronic applications.