Electromagnetically Induced Transparency Research Articles

Time dependent fluorescence spectrum of a three-level Λ system under electromagnetically induced transparency and coherent population trapping

We investigate theoretically the time dependent fluorescence spectra (TDFS) of a three-level system in electromagnetically induced transparency (EIT) and coherent population trapping (CPT) configurations. Time dependent fluorescence intensities of Rayleigh and Stokes transitions are studied as a function of the ground state coherence relaxation rate and initial state preparation, and their correlation with the temporal evolution of dark and bright states is established. Linewidths of fluorescence and absorption are compared in different regimes of relaxation rates. The results are used to discuss the characteristic features of EIT and CPT in the domain of fluorescence spectroscopy.

Switchable multifunctional meta-structure employing vanadium dioxide in the terahertz range

A meta-structure (MS) that can realize a conversion between electromagnetically induced transparency (EIT) and electromagnetically induced absorption (EIA) in the Terahertz (THz) range by utilizing phase-transition vanadium dioxide (VO2) has been reported. This work is controlled by temperature to change the conductivity of VO2 to achieve the switching function. When the VO2 is in the insulator state, the MS is designed to achieve EIT based on the principle of bright mode near-field coupling bright mode. The EIT behavior owns a peak of 0.8 at 0.430 THz with a maximum group delay of up to 6.5 ps. The MS behaves the function of EIA accompanied by the maximum absorption rate of 93.8 % at 0.432 THz while the VO2 film is tuned to the metallic state. The reason for the EIA phenomenon is the magnetic effect of the magnetic dipole generated by the MS in the coupling process. The observed EIT and EIA effects are both theoretically explained by the classic two-oscillator model. In addition, the air columns of the dielectric substrate are utilized for the purpose of frequency approaching. This proposed MS provides a new idea for the design of non-contact regulation and reconfigurable and highly absorbent MSs.

Switchable high-Q electromagnetically induced transparency based on the Ge2Sb2Te5 nanodisk dimers

Bound states in the continuum (BICs) based on metasurfaces have gained significant attention recently to enhance the strength of light-matter interaction. However, most BIC metasurfaces possess fixed optical properties once they have been fabricated. In this study, we introduce the concept of BICs to the phase-change metasurfaces composed of Ge2Sb2Te5 nanodisk dimers. The Ge2Sb2Te5 nanodisk dimers can support a low-Q transverse magnetic dipole resonance, a high-Q toroidal dipole resonance and a high-Q longitudinal magnetic dipole resonance. By adjusting geometric parameter, the high-Q longitudinal magnetic dipole resonance can be converted into a BIC mode. Notably, when Ge2Sb2Te5 is in the amorphous phase, high-Q electromagnetically induced transparency (EIT)-like resonances can be achieved due to the interaction between a low-Q transverse magnetic dipole mode and either a high-Q toroidal dipole mode or a high-Q longitudinal magnetic dipole mode. However, the EIT resonances are switched off when Ge2Sb2Te5 is transformed into the crystalline phase. Furthermore, the high-Q EIT resonances enable the realization of an ultrahigh group refractive index, and can be tuned through the phase transition of Ge2Sb2Te5. The switchable high-Q EIT resonances hold potential applications in slow-light devices, optical modulators, and biosensors.

Dual-function tunable metasurface for polarization-insensitive electromagnetic induction transparency and dual-band absorption

In this paper, we propose a dual-operating mode metasurface based on graphene and vanadium dioxide (VO2), which can switch operating modes by changing the temperature. At room temperature (25 °C), the metasurface can generates a polarization-insensitive electromagnetically induced transparency (EIT)-like effect that can be modulated by changing the Fermi energy level (E F) of graphene (through adding external voltage). In addition, the theoretical results derived from the two-particle model are in good agreement with the simulation results based on the finite element method. At high temperature (68 °C), the metasurface mode of operation can be changed to a dual-band absorber, providing absorption of 78.6% and 99.9% at 1.13 THz and 2.16 THz, respectively. Both absorption peaks can be dynamically tuned by changing the E F of graphene. The metasurface is also simultaneously polarization insensitive and has a wide incidence angle. The proposed metasurface can be used as a slow light device with a maximum group delay of 0.5 ps at room temperature and as a refractive index sensor with a maximum sensitivity of 0.5 THz/RIU at high temperature. The designed metasurface offers a new way for designing multifunctional terahertz devices, slow light devices, and refractive index sensors.

Graphene electromagnetically induced transparent polarization-insensitive sensors inthe mid-infrared frequency band.

In this paper, a polarization-insensitive sensor based on graphene electromagnetically induced transparency (EIT) is proposed. The device consists of two graphene orthogonal T-shaped structures. This T-shaped resonator produces transparent windows that largely overlap under x and y polarizations, and the results demonstrate its good polarization insensitivity. The device can accomplish detection performance with sensitivity higher than 4960nm/RIU and figure of merit (FOM) greater than 11.4. Meanwhile, when the Fermi energy level of graphene changes from 0.5to 0.8eV, it enables arbitrary modulation of the operating frequency over a wide frequency range of about 4.5terahertz in the mid-infrared band. Our work has the potential to significantly advance the area of biological molecular detection.

Single-pumped gain profile for a superluminal ring laser.

We present an approach for realizing a superluminal ring laser using a single isotope of atomic Rb vapor by producing electromagnetically induced transparency (EIT) in self-pumped Raman gain. Only a single pump laser is used for generating a Raman gain profile containing a dip at its center. The position and depth of this dip can be tuned by adjusting the intensity of the pump laser, allowing for optimizing the degree of enhancement in sensitivity within a certain operating range. This approach represents a significant simplification of the design of superluminal lasers compared to the approaches demonstrated in previous studies. We demonstrate experimentally the realization of this scheme using transitions within the D1 and the D2 manifolds of 85Rb. Numerical simulations based on an approximate model show close agreement with the experimental results.

Precision Spectroscopy of Radiation Transitions between Singlet Rydberg States of the Group IIb and Yb Atoms

The measurements of microwave (μw) and radio-frequency (RF) radiation quantitative parameters may be based on the quantum–optical approach to determine the spectral characteristics of radiation transitions between the Rydberg states of atoms. Frequencies and matrix elements are calculated for dipole transitions between opposite-parity Rydberg states nL 1L and n′L±1 1L±1 (where n′= n,n±1,n±2) of the singlet series in the alkaline–earth–metal-like atoms of group IIb (Zn, Cd, Hg) and Yb. The matrix elements determine the shifts of Rydberg-state energy levels in the field of resonance μw or RF radiation, splitting the resonance of electromagnetically induced transparency (EIT) for intensely absorbed probe radiation. Numerical computations based on the single-electron quantum defect method (QDM) and the Fues’ model potential (FMP) approach with the use of the most reliable data from the current literature on quantum defect values are performed for frequencies and matrix elements of transitions between singlet Rydberg states of 1S0-, 1P1-, 1D2-, and 1F3-series in Zn, Cd, Hg, and Yb atoms. The calculated data are approximated by polynomials in the powers of the principal quantum numbers. The polynomial coefficients are determined with the use of a standard curve-fitting interpolation polynomial procedure for numerically calculated functions. These approximation expressions provide new possibilities for accurately evaluating the frequencies and matrix elements of dipole transitions between Rydberg states over a wide range of quantum numbers n >> 1, accompanied by the emission and absorption of μw and RF photons.

A comparative study of electromagnetically induced transparency (EIT) in Λ-, V-, and Ξ-type systems using Laguerre–Gaussian (LG) laser beams

In this paper, a theoretical investigation of electromagnetically induced transparency (EIT) using Laguerre–Gaussian (LG) beams has been carried out for the three canonical atom-laser coupled systems (e.g. [Formula: see text]-, V-, and [Formula: see text]-type) in [Formula: see text]Rb atom. The required optical Bloch equations (OBEs) are derived for each system. The OBEs are analytically solved in steady-state condition under the weak probe field approximation. We have used the iterative perturbative technique to obtain the probe coherence term. The probe response w.r.t. probe detuning for different orders of the orbital angular momentum (OAM) number of both the pump and probe LG beams has been studied. We have also studied the effect of the OAM number on probe response in both Doppler-free and Doppler-broadened mediums. It has been observed that the EIT signal is squeezed for nonzero OAM number of the pump beam with arbitrary OAM number of the probe beam. It is found that for higher-order OAM number, the EIT signal is further squeezed. The modification of the EIT signal is attributed because of the spatial-dependent Rabi frequency. Our study demonstrates that the dynamic of the probe field inside an atomic medium may be controlled by tuning the OAM number of the LG beam.

Terahertz narrowband filter metasurfaces based on bound states in the continuum.

The electromagnetically induced transparency (EIT) effect realized by metasurfaces have potential for narrowband filtering due to their narrow bandwidth. In optics, bound states in the continuum (BIC) can produce strong localized resonances, which means that light can be trapped and stored for long periods of time to produce very high Q-factors. This has potential applications in designing highly efficient sensors and narrow bandpass filters. Here, we present two metal-flexible dielectric metasurfaces consisting of copper structures and polyimide substrates. Quasi BICs are obtained by breaking C2 symmetry of the metal structures. Resonance-captured quasi-BICs with ultra-high q-factor resonances satisfy the dark modes required to realize the EIT and couple to the bright modes in the structure to achieve narrowband filtering. The peak transmission rates are around 0.9 at 0.29 THz-0.32 THz and 0.23 THz-0.27 THz, respectively. Our results have practical implications for the realization of low-frequency terahertz communications.

One‐Step Generation of Energy‐Time‐Polarization‐Hyper‐Entangled W‐Class Triphotons: Nonlinear and Linear Optical Responses

AbstractNonclassical multiphoton have attracted extensive attention to serve as entangled resources for quantum information technology. Here, the continuous‐mode hyper‐entangled W‐class triphotons are theoretically generated through spontaneous six‐wave mixing (SSWM) in 85Rb. In nonlinear optical response, Zeeman sub‐states are high‐dimensionally quantized by polarized dressing. High‐dimensional entanglement is structured via atomic non‐Hermitian nature. Through linear optical response, the temporal correlations are shaped via diverse polarized dressing. SSWM‐based triphoton is a genuine triphoton possessing non‐Gaussian tripartite entanglement. The high production rate is due to co‐action of three strong input fields, electromagnetically induced transparency (EIT) protection, and slow light effect. Non‐Hermitian nature endows the system with sensitive adjustability around exceptional points (EP). Eventually, the results demonstrate multiple SSWMs causing oscillations with multiple periods in three‐photon temporal correlations for the nonlinear region, build a high‐dimensional three‐body entangled quantum network and transform multifarious profiles of the three‐photon temporal correlations for the linear region. Especially, both high‐dimensional and hyper entanglements are obtained, contributing to high quantum information capacity. Further, the system is switched among multiple states when non‐Hermitian nature is manipulated by polarized dressing. The research opens a broad prospect for generating the hyper‐entangled multiphoton with potential application in adjustable quantum networks of high information capacity.

Terahertz Metamaterial Sensor Based on Electromagnetic Induced Transparency

A graphene-based terahertz electromagnetically induced transparency (EIT) metamaterial sensor is proposed and studied. The sensor is made up of two bright modes: a graphene strip resonator and a 7-shape resonator. In a terahertz metamaterial sensor based on EIT, the metamaterial structure is designed to have two resonant modes that are coupled through a common resonator. When terahertz radiation hits the metamaterial, the two resonant modes interact, creating a window of transparency in the transmission spectrum. It illuminated that the physical mechanism of the EIT effect lay in the recombination effect of the conductive resonators. By changing the carrier relaxation lifetime or the Fermi energy of the graphene, the amplitude or the location of the EIT window could be actively tuned. The terahertz metamaterial sensors based on EIT have the potential to provide highly accurate and sensitive measurements in a wide range of fields and could lead to important advances in medical diagnostics.

Noise suppression by differential detection of simultaneous electromagnetically induced transparency and absorption in counterpropagating bichromatic light

Well-established electromagnetically induced transparency (EIT) and absorption (EIA) have been applied to various applications including quantum computing, light storage, and precision measurement. Here, we propose and implement a differential detection scheme based on coexisting EIT and EIA signals in a double-Λ system with counterpropagating bichromatic laser fields, in which a differential coherent population trapping (diff-CPT) signal is extracted with a desired enhanced amplitude and highly suppressed common-mode noise. Compared to that of either EIT or EIA, the observed signal-to-noise ratio of the proposed method’s diff-CPT signal improved by one order of magnitude, which would benefit the implementation of high-performance CPT clocks. This technique may also be applied to magnetometers and precision spectroscopy.

Slow vibration via acoustoelastic coupling: Quasi-bound states in the continuum

Elastic bound states in the continuum (BICs) have recently garnered significant attention due to their remarkably high Q-factor, leading to the decoupling of the confined mode from spectrally coexisting radiational channels. In this presentation, we introduce a novel state capable of generating a slow vibration phenomenon, exhibiting multiphysics analogous to the concept of slow light observed in electromagnetically induced transparency (EIT). This state arises from the interaction of acoustoelastic coupling within a composite structure, featuring two acoustic cavities enclosed in an elastic bar. The proposed design facilitates quasi-BICs with exceptional spatial efficiency localized within a specific area, enabling tuning of the Purcell factor by approximately six orders of magnitude. The findings of such quasi-BICs may expand the BIC family and opens new avenues for applications in diverse fields, including lasing, sensing, screening, and energy storage platforms, where ultrahigh-Q-factor modes coexist with radiative channels.

Simultaneous Detection of Refractive Index and Temperature in Terahertz Band Based on Electromagnetic Induced Transparency Effect

Simultaneous Detection of Refractive Index and Temperature in Terahertz Band Based on Electromagnetic Induced Transparency Effect

Multifunctional active terahertz metasurface with electromagnetically induced transparency, perfect absorption, and circular dichroism

Navigated by the continued demand for design integration and miniaturization, incorporating multiple diversified operations into a single metasurface hybridized with the tunable metasurface is highly demanding at the terahertz (THz) range. However, up to now, because of the limitation of the reconfigurable metasurface at the terahertz range, most metasurfaces only feature a single function or process similar functionalities at a single frequency. A multi-functional terahertz metasurface based on vanadium dioxide (VO2) is proposed in this paper, which consists of a gold layer, a VO2 bridge, a SiO2 spacer, and a VO2 layer on the back of the spacer. Under different conductivity of different VO2 layers, the proposed metasurface achieves various terahertz device functions, including single-band perfect terahertz absorption, circular dichroism (CD) for the reflected and transmitted fields, and electromagnetically induced transparency (EIT) effect. Furthermore, the proposed metasurface exhibits robust response against oblique incidences. The mechanisms of perfect absorption, chiral-selective absorption and EIT are illustrated by impedance matching theory, surface current and electric field distributions, respectively. The function-switching ability of proposed metasurface provides more options for the design of terahertz devices in the future.

Robust light bullets in Rydberg gases with moiré lattice

Rydberg electromagnetically-induced transparency has been widely studied as a medium supporting light propagation under the action of nonlocal nonlinearities. Recently, optical potentials based on moiré lattices (MLs) were introduced for exploring unconventional physical states. Here, we predict a possibility of creating fully three-dimensional (3D) light bullets (LBs) in cold Rydberg gases under the action of ML potentials. The nonlinearity includes local self-defocusing and long-range focusing terms, the latter one induced by the Rydberg-Rydberg interaction. We produce zero-vorticity LB families of the fundamental, dipole, and quadrupole types, as well as vortex LBs. They all are gap solitons populating finite bandgaps of the underlying ML spectrum. Stable subfamilies are identified utilizing the combination of the anti-Vakhitov-Kolokolov criterion, computation of eigenvalues for small perturbations, and direct simulations.

Study of microwave quantum electrometric sensors via electromagnetically induced transparency in thermal Rydberg atoms

Abstract Quantum electrometric sensing properties of a four-level system are theoretically investigated for microwave (MW) field measurement in thermal Rydberg atoms. In the considered system, the phenomenon of electromagnetically induced transparency (EIT) is invoked to study the impact of microwave (MW) field strength on its optical response. The amplitude of the MW electric field is obtained directly by measuring the height and frequency of EIT peaks. Further, for MW frequency measurement, the probe spectra are examined for red and blue MW detuned cases. It is found that the responsiveness of 133Cs for MW electric field as well as frequency is relatively higher than 87Rb. The overall sensitivity of both these atoms can be enhanced by the convenient setting of the system and field parameters.

Janus Device Based on Liquid Crystal Regulation with a Large Incidence Angle: Analogous Quantum Optical Effect and Absorption

AbstractIn this paper, a Janus metastructure device (JMD) is proposed. The JMD design introduces asymmetric structures, which leads to the generation of analogous quantum optical effects when light is incident at large angles. Specifically, forward electromagnetic‐induced transparency (EIT) and backward narrowband absorption (NA) are achieved when light is incident along different directions, displaying Janus characteristics in the forward and backward directions. Additionally, the operating frequency of JMD can be controlled through the use of liquid crystal. Such features hold promising potential for various applications in photonic and optoelectronic fields. When the axial direction of the liquid crystal is oriented along the x‐direction, the JMD achieves a transparent window over 90% within 0.46–0.51 THz at forward incidence, and an absorption peak of 84.1% appears at 0.331 THz at backward incidence. When the axial direction is oriented along the y‐direction, the JMD achieves EIT in the range of 0.51–0.575 THz at forward incidence, and a backward absorption peak of 93.3% occurs at 0.305 THz. In addition, the performance changes at different polarization and incidence angles are presented. The mechanism of absorption generation, the method of suppressing excess absorption, and the parametric inversion of the electromagnetic characteristics of JMD are also discussed.

Effects of neighboring transitions on electromagnetically induced absorption and transparency in 87Rb atoms with respect to varying hyperfine spacings

Effects of neighboring transitions through Doppler broadening on electromagnetically induced absorption (EIA) and electromagnetically induced transparency (EIT) of the degenerate two-level system at the F g =2→F e =1,2, and 3 transitions of the 87Rb D2 line have been investigated. Two different polarization configurations, such as linear parallel and linear perpendicular polarizations of coupling and probe lasers, have been studied. We study the significant variation of EIT and EIA due to the effect of the neighboring transitions via artificial variation of the hyperfine spacings of the 5P3/2 state. We have a new observation such as EIT instead of EIA due to the neighboring effect, even in the case of closed systems such as F g =2→F e =3 of 87Rb for the linear parallel configuration, for the first time to our best knowledge. The observed spectra match well with theoretically calculated spectra. EIAs for the open F g =2→F e =1 and 2 transitions at the linear perpendicular polarization are observed due to neighboring effects. This system may be applied to optical switching systems for future quantum processing application.

Metamaterial graphene sensors for the detection of two food additives.

Food safety is an important consideration for the food industry and for daily life, and food additives are essential in the modern food industry. Graphene-based metamaterial sensors are of great value and have potential applications in the detection of food additives, due to their ultra-sensitivity. This paper proposes a metasurface sensor consisting of graphene and dual elliptical ring resonators (Gr-DERRs) sensor for the detection of two common food additives. The limit of detection (LOD) for Sudan I solution is 581.43 fg/ml and, for taurine, 52.86 fg/ml. This ultra-sensitive detection is achieved by exploiting the unique electromagnetic properties of electromagnetically induced transparency (EIT) resonance, together with the Fermi energy level of graphene moving to the Dirac point, resulting in a dramatic change in the dielectric environment. The Gr-DERRs sensor has brings significant improvement in the detection of food additives with detection limits reduced to the femtogram level.