Electrode Material For High-performance Supercapacitors Research Articles

Mn-doped V2O5@rGO towards high-performance electrode materials for aqueous zinc-ion supercapacitors

In order to address the diverse energy storage requirements, there is an urgent need to fabricate supercapacitors with high specific capacitance, long cycle life, high power density and high energy density. Among various transition metal oxide materials, vanadium pentoxide emerges as a promising candidate for cathode materials in supercapacitors. Herein, we report an ion intercalation strategy to synthesize Mn-doped V2O5 (MnVO) and recombine it with reduced graphene oxide (rGO) to form Mn-doped V2O5@rGO (MnVO@rGO) hybrids with special hierarchical structure. During the hydrothermal process, Mn2+ gradually inserts into the layer spacing of V2O5 to form nanobelts, which could be cross-linked with graphene nanosheets to form MnVO@rGO 3D skeleton network. This unique structure enables the MnVO@rGO electrode to exhibit excellent specific capacitance of 1120 F g−1 at 0.2 A g−1. Outstanding cycling performance is demonstrated by achieving a capacity retention rate of 91.5 % after 2000 cycle. The symmetrical supercapacitor device assembled with MnVO@rGO as both positive and negative electrodes exhibits an energy density of 150.75 and 77.5 W h Kg−1 at power density of 450 and 9000 W kg−1, respectively. Moreover, DFT calculations also have been employed to account for the improved electrochemical performances of MnVO@rGO. Besides, the excellent electrochemical performances of MnVO@rGO indicate that it has broad application prospects in future energy storage devices.

Puffed millet derived bi-functional carbon nitride nano-sheets as efficient photocatalyst and high performance supercapacitor electrode material

The graphitic carbon nitride has been synthesized by eco-friendly method using millet seeds. The thermal puffing effect had turned millet into puffed millet and formed adjacent nanosheets nanostructure. High surface area of g-CN was achieved by using KOH through activation process and nanosheets are in the range of 150–250 nm. CV measurement demonstrated that it has capacitance of 250F/g with high stability and cyclic retention (92.2 %) which are crucial for supercapacitors. The degradation of methyl orange exhibited good photocatalytic performance (efficiency >90 %). This depicts that both “puffing effect” and chemical activation process could change biomaterials into functional materials for practical application.

Designing reduced graphene oxide decorated Ni doped δ-MnO2 nanocomposites for supercapacitor applications

Reduced Graphene Oxide (rGO) decorated δ-MnO2 and Ni-doped δ-MnO2 samples have been synthesized by a microwave-assisted co-precipitation technique which is low cost, simple and fast reaction method. The structural and morphological properties of synthesized samples have been characterized using x-ray diffraction (XRD), field emission scanning electron microscopy (FESEM) and atomic force microscopy (AFM). XRD result indicates that all samples have monoclinic crystal structure with δ phase of MnO2. The morphologies of MnO2 transformed into perforated porous nanoflakes with Ni doping and rGO composition in MnO2. AFM images confirmed that surface roughness for 3 % Ni-doped MnO2 samples is higher due to the chemical adsorption of samples. Raman spectroscopy results show the presence of vibrational and Raman active modes of MnO2.X-ray photoelectronic spectroscopy revealed the presence of mixed valencies of Mn such as Mn2+, Mn3+, and Mn4+ in prepared nanocomposites while Ni shows 2+ valency. The specific capacitance (Cs) of pure δ -MnO2 samples were 68 Fg-1 and rGO decorated 3 % Ni-doped MnO2 composition 694 Fg-1 at 10 mVs−1 respectively. EIS data of the rGO decorated Ni-doped MnO2 composition samples confirm that the porous nanoflake-shaped rGO decorated 3 % Ni-doped MnO2 composite sample has a low resistance value among all samples. These results reveal that rGO-decorated 3 % Ni-doped MnO2 nanoflakes should be a promising material for designing and fabricating the electrode material for high-performance supercapacitors.

Ligand regulation and capacitive properties of nickel based pyrazole trinuclear copper cluster organic framework

Traditional metal organic framework (MOF) hinders its application as high-performance electrode materials for supercapacitors due to the limited electron transfer efficiency and conjugation of its ligand molecules. Therefore, in this article, highly electrochemical active pyrazole trincore-copper cluster derivatives as the core unit were covalently assembled by Schiff base reaction with organic linkers of different structures to obtain a series of structurally different electroactive ligands. It was found that ligands with multiactive metal chelation site structure with polydentate carboxylate linker and aromatic extension showed high coordination ability and high degree of conjugation. The nickel-based MOF synthesized with this novel electroactive ligand exhibited a high specific capacitance of 1804 Fg−1 at a current density of 1 Ag−1. At a power density of 747.25 W kg−1, the maximum energy density of the assembled asymmetric supercapacitor assembled with Cu-PyAc-Am2Ac-Ni is 58.95 Wh kg−1 with cycling stability of 88.95 % after 5000 charges and discharges. This means that Cu-PyAc-Am2Ac-Ni is a promising electrode material for supercapacitors.

A High-Performance Supercapacitor Based on Hierarchical Template-Free Ni/SnO2 Nanostructures via Hydrothermal Method.

Novel flake-like Ni1-xSnxO2 particles were successfully prepared by template-free hydrothermal synthesis. The prepared samples were investigated for their properties by different characterization techniques. Scanning micrographs showed that the obtained particles consisted of nanoflakes. The X-ray diffraction results of the Ni1-xSnxO2 revealed the formation of mixed-phase Ni/SnO2 having the typical tetragonal structure of SnO2, and the cubic structure of Ni in a nanocrystalline nature. The doping with Ni had a certain influence on the host's lattice structure of SnO2 at different doping concentrations. Confirmation of the functional groups and the elements in the nanomaterials was accomplished using FTIR and EDS analyses. The electrochemical performance analysis of the prepared nanomaterials were carried out with the help of the CV, GCD, and EIS techniques. The specific capacitance of the synthesized nanomaterials with different concentrations of Ni dopant in SnO2 was analyzed at different scanning rates. Interestingly, a 5% Ni-doped SnO2 nanocomposite exhibited a maximum specific capacitance of 841.85 F g-1 at 5 mV s-1 in a 6 M KOH electrolyte. Further, to boost the electrochemical performance, a redox additive electrolyte was utilized, which exhibited a maximum specific capacitance of 2130.33 at 5 mV s-1 and an excellent capacitance retention of 93.22% after 10,000 GCD cycles. These excellent electrochemical characteristics suggest that the Ni/SnO2 nanocomposite could be utilized as an electrode material for high-performance supercapacitors.

Structure, Properties, and Preparation of MXene and the Application of Its Composites in Supercapacitors

Two-dimensional transition metal carbides/nitrides (MXenes) are emerging members of the two-dimensional material family, obtained by removing the A layer of the MAX phase through methods such as liquid-phase etching. This article summarizes the structure and properties of MXenes, as well as several preparation methods, including etching with hydrofluoric acid and fluoride salts, alkali-based etching, electrochemical etching, Lewis acid molten salt etching, and direct synthesis. Due to their unique two-dimensional structure and surface chemistry, MXenes exhibit good metallic conductivity, hydrophilicity, excellent flexibility, and ion intercalation properties, showing great potential in the research and application of supercapacitors and attracting widespread attention. The combination of MXene with other types of materials, including polymers, metal hydroxides, metal oxides, and carbon materials, takes advantage of composites to improve energy storage performance and shows great potential in the research and application of supercapacitors. This article provides a detailed summary of MXene composite materials and capacitor performance and introduces the research progress of MXene materials in the field of supercapacitor energy storage applications, aiming to provide references for the preparation of high-performance MXene supercapacitor electrode materials.

Fabrication of nickel foam/MXene/CoAl-layered double hydroxide by electrodeposition as electrode material for high-performance asymmetric supercapacitor

Layered double hydroxides (LDH) have become one of the highly promising electrode materials due to large specific area, excellent cycling stability and high energy density. However, the large internal resistance limits their applications in energy storage. The introduction of highly conductive materials is expected to solve this problem. In here, nickel foam (NF)/MXene/CoAl-LDH is prepared by electrodepositing CoAl-LDH on the surface of MXene-coated NF, and the effects of Co:Al ratio on the electrochemical properties are investigated in detail. The best electrochemical performance of the composite is obtained when Co:Al=2:1, with a specific capacitance of 646.7 F g−1 at 0.5 A g−1 and 450.8 F g−1 at 5 A g−1. Furthermore, the asymmetric supercapacitor is assembled with NF/MXene/CoAl-LDH as the positive electrode and activated carbon (AC) as the negative electrode. The voltage window of the device can reach 1.6 V. The specific capacitance of the device is 126.87 F g−1 at a current density of 0.5 A g−1. At the power density of 400 W kg−1, the energy density of 45.11 Wh kg−1 is provided. Even at the high power density of 4000 W kg−1, the energy density can still reach 17.88 Wh kg−1. After 5000 cycles at a current density of 5 A g−1, it still maintains a capacity retention rate of 92.9%. The asymmetric device with its high specific capacitance, long term stability and good power density and energy density has a great potential in energy storage applications.

3D Nanoflower-like and core-shell structured heterogeneous CuCo2O4@CuCo2S4@Ni(OH)2 electrode materials for high-performance asymmetric supercapacitor

The planning and synthesis of nanocomposite materials with reasonable core-shell heterostructure are of great significance in enhancing the energy density, structural stability as well as long cycle life of asymmetric supercapacitors. We have successfully prepared CuCo2O4@CuCo2S4@Ni(OH)2 core-shell 3D nanoflower array electrode material, resulting in outstanding performance of the assembled supercapacitor. Firstly, CuCo2O4 (CuC) nanowires are grown directly on nickel foam (NF) through hydrothermal and calcination reactions, followed by the formation of heterogeneous CuCo2O4@CuCo2S4 (CuC@CuS) nanoflowers via a hydrothermal reaction by using Na2S·9H2O as a vulcanizing agent. Finally, CuCo2O4@CuCo2S4@Ni(OH)2 electrode material is obtained via the electrodeposition method under a constant voltage. The prepared electrode material is composed of conductive CuC@CuS nanoflowers as the core and deposited Ni(OH)2 nanosheets as the shell, which effectively promotes ion diffusion, increases the reactive area and thereby enhances the electrochemical performance. Impressively, the composite electrode CuC@CuS@Ni(OH)2/NF material achieves an exciting high capacitance of 3753.6 F g−1 (1 A g−1), and the cycle stability is reduced by only 7.1 % after 10,000 cycle tests in the standard three-electrode system. Furthermore, the asymmetric supercapacitor (ASC) device composed of activated carbon (AC) and CuC@CuS@Ni(OH)2 exhibits 729.75 W kg−1 power density under 59.11 Wh kg−1 energy density. The aforementioned findings demonstrate that the CuC@CuS@Ni(OH)2 nanoflower array is a very potential energy storage material.

Design and construction of conductive polymer PPy anchored NiCo bi-metal sulfide composite electrode materials for high-performance hybrid supercapacitor and electrochemical hydroquinone sensor

The development of green energy materials has a crucial role in the energy crisis and environmental issues. The dual-functional oriented strategy was used to prepare new electrode material PPy@NCS by using glycerol as a template. The electrode material PPy@NCS-5 exhibits a higher specific capacitance of 2011.6 F g−1 at 1 A g−1 and delivers excellent long-term cycling stability with 93.3 % of its specific capacitance retained at 20 Ag−1 after 5000 cycles. A hybrid supercapacitor (HSC) combining PPy@NCS-5 and activated carbon (AC) yields a high energy density of 44.6 Wh kg−1 at a power density of 15,005.6 W kg−1. Furthermore, the as-prepared PPy@NCS-5/GCE can be used as an HQ sensor, which displays high sensitivity (0.026 μA/μM), an extraordinary linear response ranging (0.5–1923 μM), and a low detection limit (0.026 μM).

Synergistic effects of CoS-decorated Ni-MOF with hierarchical structures for high-performance supercapacitor electrode materials

To further improve the electrochemical performance of supercapacitor, the construction of composite based electrode material was proved to be an effective strategy. Herein, CoS-decorated Ni-MOF composites with hierarchical structures and obvious synergistic effects were synthesized by one-step hydrothermal and subsequent electrodeposition route. Benefitting from the increased surface roughness with more exposed active sites, the hierarchical structure with high space utilization rate for rapid ion transport as well as the improved conductivity and entire robustness, the optimal composites exhibited an excellent specific capacitance (2167.5 F g−1 at 1 A g−1), outstanding rate performance (up to 70.1% even at 5 A g−1) and the good cycle stability (80.12% capacity retention after 3500 cycles). The corresponding assembled asymmetric supercapacitors could reach an energy density 92.18 Wh kg−1 when the power density of was 1626.71 W kg−1, which overwhelmed most other reported works. What is more, the capacity retention could maintain 73.34% even after 7000 cycles, indicating the excellent cycle stability. Overall, to our knowledge, this is the first report on a synergistic effect of a combination of Ni-MOF and CoS. The constructed composites exhibited great potential as promising candidates for high-performance energy storage devices.

Exploring morphological variation in bismuth ferrite nanostructures by pulsed laser deposition: synthesis, structural and electrochemical properties.

Structural and electrochemical properties of bismuth ferrite nanostructures produced by pulsed laser deposition with various morphologies are reported. The nanostructures are also explored as electrode materials for high-performance supercapacitors. Scanning electron microscopy images revealed that various bismuth ferrite morphologies were produced by varying the background pressure (10-6, 0.01, 0.10, 0.25, 0.50, 1.0, 2.0 and 4.0 Torr) in the deposition chamber and submitting them to a thermal treatment after deposition at 500◦C. The as-deposited bismuth ferrite nanostructures range from very compact thin-film (10-6, 0.01, 0.10 Torr), to clustered nanoparticles (0.25, 0.50, 1.0 Torr), to very dispersed arrangement of nanoparticles (2.0 and 4.0 Torr). The electrochemical characteristic of the electrodes was investigated through cyclic voltammetry process. The increase in the specific surface area of the nanostructures as background pressure in the chamber increases does not lead to an increase in interfacial capacitance. This is likely due to the wakening of electrical contact between nanoparticles with increasing porosity of the nanostructures. The thermal treatment increased the contact between nanoparticles, which caused an increase in the interfacial capacitance of the nanostructure deposited under high background pressure in the chamber.

Polymer-mediated vacancy defects of graphene sheets as high-performance cathode materials for aqueous zinc-ion hybrid supercapacitors

The electrochemical behavior of graphene sheets in energy storage system is closely related to its electronic structures. Specifically, structural vacancy defects can expose more active sites and enhance the electrochemical performance. However, it is still a challenging problem to realize valid defect regulation on improving the reaction kinetics of electrode materials. Herein, vacancy-defective graphene sheets were constructed through the thermal mediated method via intercalation of polyacrylonitrile nanofibers. The vacancy defects were generated from the NH3 gas resulting from polymer decomposition at gradient carbonization temperature. The obtained composites of the graphene sheets and carbon nanofibers demonstrate that the vacancy defects benefit to charge transport, allowing more electrons to pass through the interlayered structure, and enhance the adsorption capacitance during the reversible electrochemical process. In addition, the as-assembled Zn ion hybrid supercapacitors exhibit a high energy density of 129.9 Wh kg−1 and outstanding cyclic stability (99.8 % after 10,000 cycling). The confined polymer-mediated thermal modification strategy can afford abundant vacancy defective sites and exhibit promising outlook for constructing high-performance graphene-based electrode materials for Zn ion hybrid supercapacitors.

Hierarchical Porous Carbon Based on Waste Quinoa Straw for High-Performance Supercapacitors.

This work presents a novel porous activated carbon electrode based on quinoa straw (QSC), which is derived from the Qinghai-Tibet Plateau. The QSC is prepared through simple precarbonization and potassium carbonate (K2CO3) activation processes and is intended for use in supercapacitors. The QSC-3 exhibits a high specific capacitance of 469.5 F g-1 at a current density of 0.5 A g-1, as well as a high specific surface area of 1802 m2 g-1. Additionally, symmetrical supercapacitors assembled using QSC-3 samples demonstrate a superior energy power density. In a 3 M KOH electrolyte, the energy density can reach 15.0 Wh kg-1 at a power density of 689.7 W kg-1. In a 1 M Na2SO4 electrolyte, the power density reaches 999.00 W kg-1, and the energy density is 39.68 Wh kg-1. Furthermore, the device shows excellent cycle life in both 3 M KOH and 1 M Na2SO4 electrolytes, with capacitance retentions of 97.55% and 96.20% after 10 000 cycles, respectively. This study provides an excellent example of utilizing waste quinoa straw to achieve low-cost, high-performance supercapacitor electrode material for sustainable electrochemical energy storage systems.

Three-dimensional honeycomb composites consist of metal carbides and layered double hydroxides for high-performance supercapacitor electrode materials

To achieve excellent electrochemical performance and stability, a composite material based on metal carbides (MXene) and CoNiZn layered double hydroxides (LDHs) has been synthesized, which synergistically combines the high electrical conductivity of MXene with the high theoretical specific capacity of LDHs. The as-prepared three-dimensional honeycomb-structural MXene/CoNiZn LDH composites have excellent cycle stability with a capacitance retention rate of 87.8% after 100,000 cycles and outstanding electrochemical activity with a specific capacitance of 2044.9 F g−1 at a scan rate of 5 mV s−1. Furthermore, electrochemical impedance spectroscopy also shows a reduced internal resistance indicating that the honeycomb-porous structure facilitates electron transfer and ion diffusion. This study provides a feasible route to develop high-performance supercapacitor electrode materials.

Preparation and comparison of polyaniline composites with lotus leaf-derived carbon and lotus petiole-derived carbon for supercapacitor applications

Biomass carbon is a class of economical and sustainable materials for supercapacitor electrode materials, while the low energy density restricts its development. Herein, lotus leaf-derived carbon (LLDC) and lotus petiole-derived carbon (LPDC) were prepared via carbonization and KOH activation processes. Then LLDC and LPDC were further modified with polyaniline to synthesize the polyaniline@lotus leaf-derived carbon (PANI@LLDC) and polyaniline@lotus petiole-derived carbon (PANI@LPDC) composites by the in-situ polymerization approach. The synthesized PANI@LPDC exhibited an ultra-large specific capacitance of 1332.5 F·g−1 at 0.3 A·g−1 and outstanding electrochemical stability of 89.2 % after 5000 cycles in the KI active electrolyte (1 M H2SO4 + 0.05 M KI), showing better electrochemical performance than PANI@LLDC (1190.3 F·g−1 at 0.3 A·g−1; 87.1 % after 5000 cycles). This is mainly due to the natural tubular structure of LPDC being more conducive to the movement of electrons, the introduction of Faradic capacitance by PANI and KI, and the porous structure of LPDC providing enough space for performing redox reactions. Moreover, a symmetric supercapacitor device assembled with two PANI@LPDC electrodes showed a superb energy density of 75.7 Wh·kg−1 at the power density of 540 W·kg−1. This study provides guidance for selecting different parts of biomass to prepare high-performance supercapacitor electrode materials.

CoNiO2/Co3O4 Nanosheets on Boron Doped Diamond for Supercapacitor Electrodes.

Developing novel supercapacitor electrodes with high energy density and good cycle stability has aroused great interest. Herein, the vertically aligned CoNiO2/Co3O4 nanosheet arrays anchored on boron doped diamond (BDD) films are designed and fabricated by a simple one-step electrodeposition method. The CoNiO2/Co3O4/BDD electrode possesses a large specific capacitance (214 mF cm-2) and a long-term capacitance retention (85.9% after 10,000 cycles), which is attributed to the unique two-dimensional nanosheet architecture, high conductivity of CoNiO2/Co3O4 and the wide potential window of diamond. Nanosheet materials with an ultrathin thickness can decrease the diffusion length of ions, increase the contact area with electrolyte, as well as improve active material utilization, which leads to an enhanced electrochemical performance. Additionally, CoNiO2/Co3O4/BDD is fabricated as the positive electrode with activated carbon as the negative electrode, this assembled asymmetric supercapacitor exhibits an energy density of 7.5 W h kg-1 at a power density of 330.5 W kg-1 and capacity retention rate of 97.4% after 10,000 cycles in 6 M KOH. This work would provide insights into the design of advanced electrode materials for high-performance supercapacitors.

Development and fabrication of phosphorus-doped ordered mesoporous carbon for highly efficient energy storage of supercapacitor application

In this work, chemical vapor deposition (CVD) using SBA-15 as the template at different temperatures ( 750 - 1000 °C) was used for the fabrication of phosphorus-doped ordered mesoporous carbons (POMCs) for high-performance supercapacitors. The structural formation of the template and POMCs was confirmed using various characterization techniques. Furthermore, the magnetic characteristics of the POMCs were explored using room-temperature field-dependent magnetization studies. Moreover, the supercapacitor performance of the POMCs was evaluated through electrochemical analyses, such as cyclic voltammetry (CV), galvanostatic charge–discharge (GCD), and electrochemical impedance spectroscopy (EIS) in a 1 M H2SO4 electrolyte medium. Among all POMCs, POMC 900 exhibited a high specific capacitance of 312 Fg−1 at a current density of 0.5 Ag−1 due to a higher Phosphorus content. Furthermore, the symmetric device fabricated using POMC 900 showed 90.8 % coulombic efficiency with 97.5 % capacitance retention after 5000 cycles at 2 Ag−1 of the current density as well. Thus, the CVD synthesis of POMC materials is a highly promising electrode material for cheap and high-performance supercapacitors.

Enriched performance of practical device assisted asymmetric supercapacitor: NiO/Co3O4 intercalated with rGO nanocomposite electrodes

In this present report, we developed high performance supercapacitor electrode material of NiO/Co3O4/rGO ternary nanocomposites synthesized by a hydrothermal method with a different nickel and cobalt molar proportions. The phase formation, surface morphology and elemental information studies of binary NiO/Co3O4 and ternary NiO/Co3O4/rGO nanocomposites were investigated. The electrochemical investigations of the binary and ternary nanocomposites electrodes have been examined. Compare with various molar proportions, the ternary NiO/Co3O4(1,3)/rGO nanocomposites shows an extraordinary capacitance value of 980 Fg−1 at 1 Ag−1 as well as robust cycle life (cyclic retention of 92 % over the 5000 cycles at 10 Ag−1). In 0–1.4 V, an asymmetric supercapacitor attained a specific capacitance of 87.2 Fg−1 and large power density (1396.3 W/kg) with extreme energy density (23.7 Wh/kg). Moreover, assembled device reveals a great rate capability (89 % over the 5000 cycles in the electrolyte of PVA-KOH). The ternary electrode has high capacitance, capacitance retention and large energy density due to NiO and Co3O4 nanoparticles being intercalated with the high surface of rGO, as well as the synergetic effect of NiO/Co3O4 and rGO.

Harnessing the potential of NiMn2O4 nanoparticle: a next-generation supercapacitor electrode material

This research addresses the pressing demand to enhance energy density and power in energy storage devices, including batteries, fuel cells, and supercapacitors. Here, NiMn2O4 is synthesized using the urea combustion method. Characterization techniques, including powder x-ray diffraction, field emission scanning electron microscopy, and BET analysis, are employed to investigate its properties. The diffraction peaks showed that NMO had a face-centered tetragonal structure, and the Scherrer equation was used to figure out the average crystallite size (t) as 8.73 nm. Its electrochemical behavior is extensively evaluated through cyclic voltammetry and galvanic charge–discharge measurements. The findings indicate that the fabricated NiMn2O4 electrodes exhibited remarkable specific capacitance and exceptional cycling stability, retaining 97% of their initial performance over 10000 cycles. The specific capacitance of the electrode from GCD was obtained 80 F g−1 at a current density of 0.25 A g–1. This study highlights the potential of NiMn2O4 as an electrode material for high-performance electrochemical supercapacitors, offering a viable solution for advancing energy storage technologies.

ZIF-67 and titania derived quaternary composites as electrode materials for high-performance supercapacitor

In this research work, three quaternary composites TZ-700 (Co3O4/TiO2/Co/NGC@700), TZ-800 (Co3O4/TiO2/Co/NGC@800), and TZ-900 (Co3O4/TiO2/Co/NGC@900) have been synthesized from metal-organic frameworks (MOFs) as electrode materials for supercapacitors. The electrochemical behavior of the prepared electrodes from TZ-700, TZ-800, and TZ-900 composites is evaluated in three different aqueous electrolytic media 1 M KOH, 1 M H2SO4, and 1 M Na2SO4. Among all the electrodes and electrolytic solutions, TZ-900 electrode exhibits the highest specific capacitance of 1617F/g at a current density of 0.5 A/g in acidic media (1 M H2SO4). These results are further inconsistent with the electrochemical surface area (ECSA) findings where TZ-900 shows the highest ECSA of 1260.50 cm2. Also, a capacitive contribution of 92 % is observed for TZ-900 in 1 M H2SO4, through Dunn’s method. The Rs (5.78) and Rct (8.51 Ω) values for TZ-900 in an acidic medium also prove it the best electrode material amongst other electrodes and electrolytes. The cyclic stability of the TZ-900 electrode when tested over 10,000 cycles shows a specific capacitance retention of 84 % at a current density of 10 A/g, making TZ-900 composite as a competent electrode material for supercapacitor applications.