Electrochemiluminescence Aptasensor Research Articles

Solvent Regulation Induced Cathode Aggregation-Induced Electrochemiluminescence of Tetraphenylethylene Nanoaggregates for Ultrasensitive Zearalenone Analysis.

Zearalenone (ZEN) is an extremely hazardous chemical widely existing in cereals, and its high-sensitivity detection possesses significant significance to human health. Here, the cathodic aggregation-induced electrochemiluminescence (AIECL) performance of tetraphenylethylene nanoaggregates (TPE NAs) was modulated by solvent regulation, based on which an electrochemiluminescence (ECL) aptasensor was constructed for sensitive detection of ZEN. The aggregation state and AIECL of TPE NAs were directly and simply controlled by adjusting the type of organic solvent and the fraction of water, which solved the current shortcomings of low strength and weak stability of the cathode ECL signal for TPE. Impressively, in a tetrahydrofuran-water mixed solution (volume ratio, 6:4), the relative ECL efficiency of TPE NAs reached 16.03%, which was 9.2 times that in pure water conditions, and the maximum ECL spectral wavelength was obviously red-shifted to 617 nm. In addition, "H"-shape DNA structure-mediated dual-catalyzed hairpin self-assembly (H-D-CHA) with higher efficiency by the synergistic effect between the two CHA reactions was utilized to construct a sensitive ECL aptasensor for ZEN analysis with a low detection limit of 0.362 fg/mL. In conclusion, solvent regulation was a simple and efficient method for improving the performance of AIECL materials, and the proposed ECL aptasensor had great potential for ZEN monitoring in food safety.

Metal-organic framework-based aptasensor utilizing a novel electrochemiluminescence system for detecting acetamiprid residues in vegetables

The work was based on N-(4-Aminobutyl)-N-ethylisoluminol (ABEI)-functionalized Fe-MIL-101 and gold nanoparticles (AuNPs) as sensing materials, and an electrochemiluminescence (ECL) aptasensor was constructed for detecting acetamiprid. As a metal-organic framework (MOF) material, Fe-MIL-101, was renowned for its unique three-dimensional network structure and efficient catalytic capability. ABEI, a common ECL reagent, was widely applied. ABEI was introduced into the Fe-MIL-101 structure as a luminescence functionalization reagent to form Fe-MIL-101@ABEI. This approach avoided limitations on the loading capacity of luminescent reagents imposed by modification and encapsulation methods. With character of excellent catalytic activity and ease of bioconjugation, AuNPs offered significant advantages in biosensing. Leveraging the reductive properties of ABEI, AuNPs were reduced around Fe-MIL-101@ABEI, resulting in the modified luminescent functionalized material denoted as Fe-MIL-101@ABEI@AuNPs. An aptamer was employed as a recognition element and was modified accordingly. The aptamer was immobilized on Fe-MIL-101@ABEI@AuNPs through gold-sulfur (Au–S) bonds. After capturing acetamiprid, the aptamer induced a decrease in the ECL signal intensity within the ABEI-hydrogen peroxide (H2O2) system, enabling the quantitative detection of acetamiprid. The aptasensor displayed remarkable stability and repeatability, featured a detection range of 1×10−3-1×102 nM, and had a limit of detection (LOD) of 0.3 pM (S/N=3), which underscored its substantial practical application potential.

Rapid and simple viral protein detection by functionalized 2D MoS2/graphene electrochemiluminescence aptasensor

Rapid and simple viral protein detection by functionalized 2D MoS2/graphene electrochemiluminescence aptasensor

Sensitive detection of kanamycin based on ECL resonance energy transfer between iridium complex doped SiO2 nanospheres and Au nanoparticles decorated TiVC MXene

Herein, a novel sandwich electrochemiluminescence (ECL) aptasensor was developed based on the resonance energy transfer (RET) with iridium complex doped silicate nanoparticles (SiO2@Ir) as energy donor and gold nanoparticles modified TiVC MXene (AuNPs@TiVC) as energy acceptor. Strong anodic ECL signal of SiO2@Ir was obtained through both co-reactant pathway and annihilation pathway. Electrochemical results showed that SiO2@Ir has good electron transfer rate and large specific surface area to immobilize more aptamers. AuNPs@TiVC apparently quenched the ECL signal of SiO2@Ir due to the ECL resonance energy transfer between them. In the presence of kanamycin (KAN), a sandwich type sensor was formed with the aptamer probes as connecters between the donor and the acceptor, resulting in the decrease of ECL intensity. Under the optimal condition, KAN could be sensitively detected in the range of 0.1 pg/mL to 10 ng/mL with a low detection limit of 24.5 fg/mL. The proposed ECL system exhibited satisfactory analytical performance, which can realize the detection of various biological molecules by adopting suitable aptamer.

An electrochemiluminescence sensor based on Ag NPs amplifying PDDA-modified TbPO4:Ce NWs signal for sensitive detection of lincomycin

The residue of lincomycin in water will not only aggravate the drug resistance of bacteria but also cause damage to the human body through biological accumulation. In this work, an electrochemiluminescence (ECL) aptasensor for the detection of lincomycin was constructed based on polydimethyldiallylammonium chloride (PDDA) functionalized Ce-doped TbPO4 nanowires (PDDA-TbPO4:Ce NWs) and silver nanoparticles (Ag NPs). TbPO4:Ce NWs were used as the luminophore, and PDDA was used to functionalize the luminophore to make the surface of the luminophore positively charged. The negatively charged silver nanoparticles were combined with PDDA-TbPO4:Ce NWs by electrostatic interaction. Ag NPs accelerated the electron transfer rate and promoted the ECL efficiency, which finally increased the ECL intensity of TbPO4:Ce NWs by about 4 times. Under the optimal conditions, the detection limit of the ECL sensor was as low as 4.37 × 10−16 M, and the linear range was 1 × 10 − 15 M to 1 × 10 − 5 M, with good selectivity, stability, and repeatability. The sensor can be applied to the detection of lincomycin in water, and the recovery rate is 97.7–103.4 %, which has broad application prospects.

Magnetic graphene oxide and vertically-ordered mesoporous silica film for universal and sensitive homogeneous electrochemiluminescence aptasensor platform

Herein, we demonstrated a convenient and highly sensitive homogeneous electrochemiluminescence (ECL) aptasensor platform by combination of magnetic composite probe and vertically-ordered mesoporous silica films (VMSF). Magnetic composite probe composed of biorecognition element (target-specific aptamer), ECL signal reporter (Ru(bpy)32+) and large-scale magnetic graphene oxide (M−GO), can be prepared by simple incubation, magnetic separation and redispersion prior to use. High-affinity and specific binding between target and aptamer can detach aptamer from M−GO and simultaneously release the slight amount of Ru(bpy)32+ into a solution, which can be sensitively detected by VMSF modified indium tin oxide (VMSF/ITO) due to the excellent electrostatic preconcentration capacity of VMSF. In this sensing system, detectable signal of Ru(bpy)32+ can be remarkably amplified by VMSF/ITO and meanwhile background signal can be reduced by the adsorption capacity of M−GO and size exclusion property of VMSF/ITO, effectively promoting the analytical performance of the present homogeneous ECL aptasensor. The applicability and universality of this sensing platform was confirmed by employing alpha fetoprotein (AFP) and prostate specific antigen (PSA) as the target models and their detection limits were 0.08 pg/mL and 9.6 pg/mL, respectively. Furthermore, the designed homogeneous ECL aptasensor platform is label-free, immobilization-free, low-cost, and free of additional electrode modification and sample pretreatment procedures, rendering a simple sensing strategy for quantitative determination of various biomarkers in clinical diagnosis by adapting the specific aptamer.

Potential-Resolved Ratiometric Aptasensor for Sensitive Acetamiprid Analysis Based on Coreactant-free Electrochemiluminescence Luminophores of Gd-MOF and "Light Switch" Molecule of [Ru(bpy)2dppz]2.

For conventional potential-resolved ratiometric electrochemiluminescence (ECL) systems, the introduction of multiplex coreactants is imperative. However, the undesirable interactions between different coreactants inevitably affect analytical accuracy and sensitivity. Herein, through the coordination of aggregation-induced emission ligands with gadolinium cations, the self-luminescent metal-organic framework (Gd-MOF) is prepared and serves as a novel coreactant-free anodic ECL emitter. By the intercalation of [Ru(bpy)2dppz]2+ with light switch effect into DNA duplex, one high-efficiency cathodic ECL probe is obtained using K2S2O8 as a coreactant. In the presence of acetamiprid, the strong affinity between the target and its aptamer induces the release of [Ru(bpy)2dppz]2+, resulting in a decreasing cathode signal and an increasing anode signal owing to the ECL resonance energy transfer from Gd-MOF to [Ru(bpy)2dppz]2+. In this way, an efficient dual-signal ECL aptasensor is constructed for the ratiometric analysis of acetamiprid, exhibiting a remarkably low detection limit of 0.033 pM. Strikingly, by using only one exogenous coreactant, the cross interference from multiple coreactants can be eliminated, thus improving the detection accuracy. The developed high-performance ECL sensing platform is successfully applied to monitor the residual level of acetamiprid in real samples, demonstrating its potential application in the field of food security.

A perovskite-based electrochemiluminescence aptasensor for tetracycline screening.

Tetracyclines are currently the most commonly used class of antibiotics, and their residue issue significantly impacts public health safety. In this study, a surface modification of perovskite with cetyltrimethylammonium bromide led to the generation of stable electrochemiluminescence (ECL) emitters in aqueous systems and improved the biocompatibility of perovskite. A perovskite quantum dot-based ECL sensing strategy was developed. Utilizing the corresponding aptamer of the antibiotics, strain displacement reactions were triggered, disrupting the ECL quenching system composed of perovskite and Ag nanoclusters (Ag NCs) on the electrode surface, generating a signal to achieve quantitative detection of several common tetracycline antibiotics. The perovskite quantum dot provided a strong and stable initial signal, while the efficient catalytic activity of the silver cluster enhanced the recognition sensitivity. Tetracycline, chlortetracycline, and oxytetracycline were used as examples to demonstrate the differentiation and quantitative detection through this method. In addition, the aptasensor exhibited analytical performance with the linear range (0.1-10μM OTC) and good recovery rates of 94.7% to 101.6% in real samples. This approach has the potential to become a sensitive and practical approach for assessing antibiotic residues.

Double-enhanced sandwich electrochemiluminescence aptasensor based on g-C3N4–Au-luminol nanocomposites and ZnCuS nanosheets for highly sensitive detection of mucin 1

The traditional luminol electrochemiluminescence (ECL) sensing suffers from low signal response and instability issues. Here, an Au/ZnCuS double-enhanced g-C3N4-supported luminol ECL aptasensor is constructed for the sensitive detection of human mucin 1 (MUC1). In this platform, g-C3N4 of a large specific surface area is beneficial to load more luminol illuminants. Au nanoparticles promote the decomposition of H2O2 coreactants to generate more reactive oxygen (•OH and O2•−) intermediates, while ZnCuS can immobilize the aptamer and simultaneously catalyze H2O2 decomposition, realizing the double-wing signal amplification. Under optimal conditions, this sensor shows a good detection capability within 1.0 × 10−4–1.0 × 103 ng mL−1 and a low detection limit of 5.0 × 10−5 ng mL−1, as well as ideal stability, selectivity, and reproducibility. This double-enhanced aptasensor highlights a new signal-enhancement approach for early biomarker detection.

Electrochemiluminescence aptasensor toward femtomolar detection of alpha synuclein oligomer as parkinson’s disease marker using CdTe@ZnS quantum dots as luminescent label and graphdiyne@polyaniline as novel co‐reactant

na

A Controlled Release Aptasensor Utilizing AIE-Active MOFs as High-Efficiency ECL Nanoprobe for the Sensitive Detection of Adenosine Triphosphate.

Improving the sensitivity in electrochemiluminescence (ECL) detection systems necessitates the integration of robust ECL luminophores and efficient signal transduction. In this study, we report a novel ECL nanoprobe (Zr-MOF) that exhibits strong and stable emission by incorporating aggregation-induced emission ligands into Zr-based metal-organic frameworks (MOFs). Meanwhile, we designed a high-performance signal modulator through the implementation of a well-designed controlled release system with a self-on/off function. ZnS quantum dots (QDs) encapsulated within the cavities of aminated mesoporous silica nanoparticles (NH2-SiO2) serve as the ECL quenchers, while adenosine triphosphate (ATP) aptamers adsorbed on the surface of NH2-SiO2 through electrostatic interaction act as "gatekeepers." Based on the target-triggered ECL resonance energy transfer between Zr-MOF and ZnS QDs, we establish a coreactant-free ECL aptasensor for the sensitive detection of ATP, achieving an impressive low detection limit of 0.033 nM. This study not only demonstrates the successful combination of ECL with controlled release strategies but also opens new avenues for developing highly efficient MOFs-based ECL systems.

“Off-on” signal-switchable electrochemiluminescence aptasensor based on Cu2O-ABEI-AgNPs mediated signal amplification for the detection of profenofos

An “off-on” signal-switchable electrochemiluminescence (ECL) aptasensor was designed for the detection of profenofos based on Cu2O-ABEI-AgNPs as ECL enhancers. Cubic Cu2O was prepared as a core, and AgNO3 was reduced to silver nanoparticles (AgNPs) by N-(4-Aminobutyl)-N-ethylisoluminol (ABEI) as a shell on the Cu2O surface. The Cu2O with a large surface area could enhance the fixation of AgNPs. Cu2O and AgNPs were utilized as catalysts to enhance the double amplification ECL signals. Additionally, a molecular probe consisting of gold nanoparticles (AuNPs), a T-type aptamer (consisting of thymines “T”, referred to as TApt), and aptamer (Apt) was prepared (referred to as AuNPs-Apt-TApt). The presence of mercury ion (Hg2+) could potentially quench the ECL signal and bind the thymine-Hg2+-thymine (T-Hg2+-T) structure. The structure formed a probe with Apt and AuNPs. The complementary short chain of aptamer (CApt) was designed and immobilized on AgNPs. In the absence of profenofos, the Apt and CApt were bound through complementary base pairing. The probe was immobilized on the electrode, resulting in quenching of the signal (switched into “off”). However, upon the presence of profenofos, the probe was detached from the electrode, and the signal was restored (switched into “on”). Finally, the aptasensor had a broad detection range (1 ×10-3 ng/mL∼1 ×102 ng/mL) with a lower limit of detection (LOD, 3 ×10-4 ng/mL) and an excellent recovery rate (94.34%∼113.80%) for the detection of profenofos in vegetables. The aptasensor had good stability, repeatability and specificity.

An electrochemiluminescence aptasensor based on Ti3C2 QDs-1T/2H MoS2 nano-hybrid material for the highly sensitive detection of lincomycin

Developing a highly selective and sensitive analysis strategy for lincomycin (LIN) is of great significance for environmental protection and food safety. Herein, we reported a novel electrochemiluminescence (ECL) aptasensor based on Ti3C2 QDs-1T/2H MoS2 nano-hybrid luminophore for detection of LIN. The hybridization of Ti3C2 QDs and 1T/2H MoS2 endowed nanocomposite with structural and compositional advantages for boosting the ECL performance of QDs by about three times. This enhancement could be attributed to the remarkable electrocatalytic activity and high conductivity exhibited by 1T/2H MoS2. Secondly, the great surface area of 1T/2H MoS2 is conducive to the high dispersion of Ti3C2 QDs, and its good conductivity could promote charge transfer. On the other hand, the excellent catalytic performance of 1T/2H MoS2 could facilitate the reduction of S2O82− to produce more radical, which significantly enhance the ECL signal of Ti3C2 QDs. Given these features, a sensor for detection of LIN was established based on specific recognition between target and aptamer. The sensor showed a good linear relationship (0.05 ng mL−1 ∼100 μg mL−1) with a detection limit as low as 0.02 ng mL−1. It is worth noting that this work has been validated in testing milk samples, exhibiting great potential application prospects in food analysis.

A novel electrochemiluminescence aptasensor using Ti3C2@AuNRs-Ru for ultra-sensitive detection of T-2 toxin

T-2 toxin is widely found in nature and also contaminates field crops and grain storage, posing a potential threat to human health. In this study, an ultra-sensitive electrochemiluminescence (ECL) aptasensor has been developed for the detection of T-2 toxin using Ti3C2 MXene-based nanomaterials functionalized with gold nanorods (AuNRs) and Ru(bpy)32+ (Ti3C2@AuNRs-Ru) as the luminescent indicator. Specifically, gold nanorods are grown in situ on the surface of Ti3C2 MXene, and Ru(bpy)32+ is loaded onto Ti3C2@AuNRs via electrostatic force to form the Ti3C2@AuNRs-Ru luminescent probe, which is then modified on the electrode surface. The aptamer of T-2 toxin is connected to the electrode surface through Au-S bonds, and then the capture chain (cDNA) with a quenching probe of ferrocene is introduced to the system. Ferrocene can quench the luminescence of the probe, reducing the ECL signal. In the presence of T-2 toxin, it binds to the aptamer with higher affinity, so the quenching probe is competed down, resulting in the recovery of the ECL signal. The increase in ECL signal is linearly correlated with the logarithm of T-2 toxin concentration, with the detection range of 50 fg/mL to 50 ng/mL and a detection limit of 6.44 fg/mL. This strategy utilizes the high catalytic activity and excellent conductivity of MXene, improving the sensitivity significantly. The proposed sensor has been successfully applied for the detection of actual samples and provides a new strategy for the detection of hazardous pollutants.

Electrochemiluminescence Sensor Based on CTS-MoS2 and AB@CTS with Functionalized Luminol for Detection of Malathion Pesticide Residues.

The accumulation of pesticide residues poses a significant threat to the health of people and the surrounding ecological systems. However, traditional methods are not only costly but require expertise in analysis. An electrochemiluminescence (ECL) aptasensor was developed using chitosan and molybdenum disulfide (CTS-MoS2), along with acetylene black (AB@CTS) for the rapid detection of malathion residues. Due to the weak interaction force, simple composite may lead to uneven dispersion; MoS2 and AB were dissolved in CTS solution, respectively, and utilized the biocompatibility of CTS to interact with each other on the electrode. The MoS2 nanosheets provided a large specific surface area, enhancing the utilization rate of catalytic materials, while AB exhibited excellent conductivity. Additionally, the dendritic polylysine (PLL) contained numerous amino groups to load abundant luminol to catalyze hydrogen peroxide (H2O2) and generate reactive oxygen species (ROS). The proposed ECL aptasensor obtained a low detection limit of 2.75 × 10-3 ng/mL (S/N = 3) with a good detection range from 1.0 × 10-2 ng/mL to 1.0 × 103 ng/mL, demonstrating excellent specificity, repeatability, and stability. Moreover, the ECL aptasensor was successfully applied for detecting malathion pesticide residues in authentic samples with recovery rates ranging from 94.21% to 99.63% (RSD < 2.52%). This work offers valuable insights for advancing ECL sensor technology in future applications.

The Fabrication of a Probe-Integrated Electrochemiluminescence Aptasensor Based on Double-Layered Nanochannel Array with Opposite Charges for the Sensitive Determination of C-Reactive Protein

The effective and sensitive detection of the important biomarker, C-reactive protein (CRP), is of great significance in clinical diagnosis. The development of a convenient and highly sensitive electrochemiluminescence (ECL) aptasensor with an immobilized emitter probe is highly desirable. In this work, a probe-integrated ECL aptamer sensor was constructed based on a bipolar silica nanochannel film (bp-SNF) modified electrode for the highly sensitive ECL detection of CRP. The bp-SNF, modified on an ITO electrode, consisted of a dual-layered SNF film, including the negatively charged inner SNF (n-SNF) and the outer SNF with a positive charge and amino groups (p-SNF). The ECL emitter, tris(bipyridine) ruthenium (II) (Ru(bpy)32+), was stably immobilized in a nanochannel of bp-SNF using the dual electrostatic interactions with n-SNF attracting and p-SNF repelling. The amino groups on the outer surface of bp-SNF were aldehyde derivatized, allowing for the covalent immobilization of recognitive aptamers (5′-NH2-CGAAGGGGATTCGAGGGGTGATTGCGTGCTCCATTTGGTG-3′), leading to the recognition interface. When CRP bound to the aptamer on the recognition interface, the formed complex increased the interface resistance and reduced the diffusion of the co-reactant tripropylamine (TPA) into the nanochannels, leading to a decrease in the ECL signal. Based on this mechanism, the constructed aptamer sensor could achieve a sensitive ECL detection of CRP ranging from 0.01 to 1000 ng/mL, with a detection limit (DL) of 8.5 pg/mL. The method for constructing this probe-integrated ECL aptamer sensor is simple, and it offers a high probe stability, good selectivity, and high sensitivity.

Nitrogen-doped carbon dot and DNA tetrahedron nanostructure based electrochemiluminescence aptasensor for AFB1 detection

An electrochemiluminescence (ECL) aptasensor with aptamer as recognition element, N-doped carbon dots (N-CDs) as luminophore, and DNA tetrahedral nanostructure (DTN) as carrier to loading abundant N-CDs for signal amplification was developed for ultra-sensitive aflatoxin B1 (AFB1) detection. The complementary DNA (cDNA) was firstly immobilized on the Au electrode (AuE) surface to hybridize with the AFB1 aptamer. In the presence of AFB1, it would competitively with cDNA for binding the aptamer, causing the exposure of cDNA. DTN modified with AFB1 aptamer on top and N-CDs on the four vertices would combine with cDNA onto the AuE surface to generate ECL signals due to electron transfer between co-reactants (K2S2O8) and N-CDs, which was positively related to the concentration of AFB1. Due to the high specificity of aptamer, the outstanding ECL performance of N-CDs and the enhanced signal output of DTN/N-CDs probes, the as-constructed ECL aptasensor realized excellent sensitivity with a low detection limit of 77 pg/mL and a wide linear concentration of 1.0 × 10−1-1.0 × 104 ng/mL for AFB1, as well as fascinating accuracy with acceptable recoveries of 89.54–111.0% in the spiked Coix seed matrices. Successful application for AFB1 detection in actual samples confirmed the extensive practicability of the ECL aptasensor, providing a universal platform for more trace contaminants by altering the corresponding aptamers.

Electrochemiluminescence Aptasensor with Dual Signal Amplification by Silica Nanochannel-Based Confinement Effect on Nanocatalyst and Efficient Emitter Enrichment for Highly Sensitive Detection of C-Reactive Protein.

The rapid and sensitive detection of the important biomarker C-reactive protein (CRP) is of great significance for monitoring inflammation and tissue damage. In this work, an electrochemiluminescence (ECL) aptasensor was fabricated based on dual signal amplification for the sensitive detection of CRP in serum samples. The sensor was constructed by modifying a silica nanochannel array film (SNF) on a cost-effective indium tin oxide (ITO) electrode using the Stöber solution growth method. Gold nanoparticles (AuNPs) were grown in situ within the nanochannels using a simple electrodeposition method as a nanocatalyst to enhance the active electrode area as well as the ECL signal. The negatively charged nanochannels also significantly enriched the positively charged ECL emitters, further amplifying the signal. The recognition aptamer was covalently immobilized on the outer surface of SNF after modification with epoxy groups, constructing the aptasensor. In the presence of CRP, the formation of complexes on the recognitive interface led to a decrease in the diffusion of ECL emitters and co-reactants to the supporting electrode, resulting in a reduction in the ECL signal. Based on this mechanism, ECL detection of CRP was achieved with a linear range of 10 pg/mL to 1 μg/mL and a low limit of detection (7.4 pg/mL). The ECL aptasensor developed in this study offers advantages such as simple fabrication and high sensitivity, making promising applications in biomarker detection.

T4PPVB-COP composite-driven innovative electrochemiluminescence aptasensor for ultra-sensitive detection of chlorpyrifos.

Herein, an enhanced electrochemiluminescence (ECL) aptasensor driven by a complex (T4PPVB-COP@CdS QDs) with large specific surface area and high stability was constructed for highly sensitive detection of chlorpyrifos (CPF), using electrostatic interactions and signal amplification techniques. In the presence of CPF, the specific binding between the aptamer and CPF caused partial detachment of the aptamer from the sensor, thus restoring the ECL signal. Notably, gold nanoparticles functionalized with streptavidin (SA) as signal enhancers further amplified the ECL signal in specific interactions with aptamers, thereby improving the sensitivity of the assay. Based on this, the proposed ECL aptasensor demonstrated significant detection performance for CPF with a linear range of 1-107pg/mL and a LOD of 0.34pg/mL. Furthermore, the feasibility of the ECL aptasensor was validated by the detection and analysis of CPF in real samples, which also provided a broad reference value for bioanalysis.

Novel Ultralow-Potential Electrochemiluminescence Aptasensor for the Highly Sensitive Detection of Zearalenone Using a Resonance Energy Transfer System.

An ultralow-potential electrochemiluminescence (ECL) aptasensor has been designed for zearalenone (ZEN) assay based on a resonance energy transfer (RET) system with SnS2 QDs/g-C3N4 as a novel luminophore and CuO/NH2-UiO-66 as a dual-quencher. SnS2 QDs were loaded onto g-C3N4 nanosheets and enhanced the ECL luminescence via strong synergistic effects under an ultralow potential. The UV-vis absorption spectrum of CuO/NH2-UiO-66 exhibits considerable overlap with the ECL emission spectrum of SnS2 QDs/g-C3N4, an important consideration for the RET process. In order to stimulate RET, the ZEN aptamer and complementary DNA are introduced for conjugation between the donor and the acceptor. With the binding interaction between ZEN by its aptamer, CuO/NH2-UiO-66 is removed from the electrode surface, resulting in the inhibition of the RET system and an increase in the ECL signal. Under optimal conditions, the as-prepared aptasensor quantified ZEN from 0.5 μg·mL-1 to 0.1 fg·mL-1 with a low limit of detection of 0.085 fg·mL-1, and it exhibited good stability, excellent specificity, high reproducibility, and desirable practicality. The sensing strategy provides a method for mycotoxins assay to monitor food safety.