Electrochemical Sensitivity Research Articles

Tailored multi-layer graphene arrays for precision detection of neurotransmitter

The development of sensitive dopamine (DA) sensors has significantly contributed to our understanding of DA-related disorders and has enabled advancements in medical diagnostics and neuroscience research. Therefore, in the present work, a novel electrochemical sensing platform was developed using multi-layer graphene arrays (MGA) modified electrodes for the selective detection of DA. The preparation of high-quality MGA was achieved using the plasma-enhanced chemical vapor deposition (PCVD) method and was confirmed using various physiochemical techniques such as transmission electron microscopy and Raman spectroscopy. The modified electrode, made of MGA, was utilized for the electrochemical detection of DA using cyclic voltammetry and amperometry i-t methods. DA’s electrochemical oxidation response and sensitivity at the MGA electrode were ≈9 and 3 times higher than observed with unmodified and commercially available multi-layer graphene-modified electrodes. The MGA sensor exhibited excellent analytical parameters for DA detection, including a wide linear range of up to 172.1 μM and a low detection limit of 1.3 nM. The sensor also demonstrated remarkable sensitivity, storage stability, and selectivity for DA detection, making it highly suitable for accurately detecting DA in medical diagnostics and neuroscience research. Furthermore, the practical application of the MGA sensor for DA detection was demonstrated in various real samples.

Cu2MoS4 Nanocatalyst-Based Electrochemical Sensor for Ofloxacin Electro-Oxidation: Delineating the Combined Roles of Crystallinity and Morphology on the Analytical Performance.

In this study, we demonstrate the influence of crystallinity and morphology on the analytical performance of various Cu2MoS4 (CMS) nanocatalysts-based electrochemical sensors for the high-efficiency detection of Ofloxacin (OFX) antibiotic. The electrochemical kinetics parameters including peak current response (ΔIp), peak-to-peak separation (ΔEp), electrochemically active surface area (ECSA), electron-transfer resistance (Rct), were obtained through the electrochemical analyses, which indicate the single-crystalline nature of CMS nanomaterials (NMs) is beneficial for enhanced electron-transfer kinetics. The morphological features and the electrochemical results for OFX detection substantiate that by tuning the tube-like to plate-like structures of the CMS NMs, it might noticeably enhance multiple adsorption sites and more intrinsic active catalytic sites due to the diffusion of analytes into the interstitial spaces between CMS nanoplates. As results, highly single-crystalline and plate-shaped morphology structures of CMS NMs would significantly enhance the electrocatalytic OFX oxidation in terms of onset potential (Eonset), Tafel slope, catalytic rate constant (kcat), and adsorption capacity (Γ). The CMS NMs-based electrochemical sensing platform showed excellent analytical performance toward the OFX detection with two ultra-wide linear detection concentration ranges from 0.25-100 and 100-1000 μM, a low detection limit of 0.058 μM, and an excellent electrochemical sensitivity (0.743 μA μM-1 cm-2).

A Physical Insight of Phase-Dependent Electron Transfer Kinetic Behaviors and Electrocatalytic Activity of an Iron Oxide-Based Sensing Nanoplatform Towards Chloramphenicol

Insight into the phase-dependent electron transfer kinetics and electrocatalytic activity of metal oxide nanostructures is important in the rational design of functional nanostructures for realizing high-performance electrochemical sensors. This study focuses on elucidating the effect of the crystalline phase on the electron transfer kinetics and electrocatalytic activity of iron(III) oxide. The α-FeOOH, γ-Fe2O3, and α-Fe2O3 nanorods were designed by using a simple chemical method and calcining process. The phase-dependent difference in the electron transfer kinetics and electrocatalytic activity toward the sensitive response of chloramphenicol (CAP) is observed by the transformation from α-FeOOH to γ-Fe2O3, and from α-FeOOH to α-Fe2O3 nanorods. We found that the oxygen vacancies formed in phase transformation from α-FeOOH to α-Fe2O3 is a key factor in promoting the electrochemical reduction of chloramphenicol. The α-Fe2O3 nanorods-based electrochemical sensors showed a linear response in the CAP concentration range from 0.1 to 75 μM with a limit of detection of 60 nM and an electrochemical sensitivity of 2.86 μA μM−1 cm−2. This work further provides valuable physical insight into the phase-dependent electron transfer kinetics and electrocatalytic activity of metal oxide nanostructures for the rational design of sensing interface.

Hydrazo Pyrazole-Pyridone Fluorescent tag for NLO, Live cell imaging, LFPs visualization, Photophysical probing, and Electrochemical sensor for Dopamine detection.

The present communication reports on the synthesis of a novel methyl-pyridone azo fluorescent tag (MPAFT) were proven through 1H (NMR), FT-IR, UV-vis, and high-resolution mass spectrometry. The quantum chemical parameters of MPAFT were evaluated using density functional theory (DFT) analysis. It was further investigated for its latent fingerprint (LFPs) in various surfaces and anticounterfeiting applications. By exposing Level I-Level III, ridge features to UV light with a wavelength of 365 nm, a bioimaging investigation has also demonstrated the potential of MPAFT's emission behaviour. The cyclic voltammetry (CV) and linear sweep voltammetry (LSV) at MPAFT/MGCE (modified glassy carbon electrode) were used to explore the electrochemical sensitivity and reliable detection of dopamine (DA) in neutral PBS (pH7) electrolyte solution, and the results show good sensitivity and detection. The lower detection limit for LSV was 0.81 μM under optimum conditions.

Ventilator-associated pneumonia diagnosis: electrochemical sensors for rapid and sensitive detection of pyocyanin

Ventilator-associated pneumonia (VAP) is a severe condition in critically ill patients that requires timely diagnosis to improve patient outcomes. In this study, we developed an electrochemical sensor for pyocyanin detection using a TiO2\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$_2$$\\end{document}-NiO-rGO catalyst and found that it could detect the concentration of pyocyanin required for mimicking the throat trachea’s environment (LOD: 0.2 μ\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$\\mu $$\\end{document}g/mL). We also investigated using DNA aptamer for detecting pyocyanin, a biomarker of Pseudomonas aeruginosa, a common causative agent of VAP. Our findings suggest that the TiO2\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$_2$$\\end{document}-NiO-rGO catalyst without aptamer could provide a rapid and cost-effective diagnostic tool for VAP, and the electrochemical sensor has the potential to be made disposable for in vivo applications. Using the TiO2\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$_2$$\\end{document}-NiO-rGO catalyst offers synergistic effects that enhance the detection process’s overall electrochemical performance, sensitivity, and selectivity. This work’s results demonstrate that electrochemical detection of pyocyanin using a TiO2\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$_2$$\\end{document}-NiO-rGO catalyst holds great potential for various applications, such as clinical diagnostics and drug discovery. Further research and optimization of the catalyst composition, morphology, and surface modifications can contribute to advancing this pyocyanin electrochemical detection approach.

Visible Light as a Promising Signal Amplification Tool for the Efficient Electrochemical Detection of Azithromycin Antibiotic by Using Photoactive Spinel Nickel Ferrite Nanoflakes

An efficient photoactive spinel NiFe2O4 nanoflakes (NFO NFs) was successfully prepared and integrated into an electrochemical sensor for the sensitive determination of Azithromycin (AZM) under visible light illumination. With the introduction of 532 nm laser illumination, NFO NFs could be easily excited and induce the charge-separation state with electrons in the conduction band and holes in the valence band. Upon illumination, the low band gap value in combination with edge-to-flat-surface/edge-to-edge conjunctions of NFO NFs could form the electron transfer pathway for transferring photogenerated electron-hole pairs to the AZM analyte-NFO electrode interface. Hence, the fabricated visible light-assisted NFO-based electrochemical sensor shows remarkable enhanced analytical performance, with calculated values of electron transfer rate constant, adsorption capacity, diffusion coefficient, and catalytic rate constant under visible light illumination of 1.29, 1.27, 2.08, and 3.40 times higher than in the dark condition, respectively. As a result, the NFO-based electrochemical sensing platform in the presence of visible light illumination possessed a high electrochemical sensitivity of 0.070 μA μM−1 in a wide linear dynamic range of 2.5–150 μM and a detection limit of 1.67 μM and also exhibited excellent anti-interference ability, repeatability, storage stability, reproducibility, and practical feasibility for AZM detection in pharmaceutical tablets.

Optimization of Electrochemical Sensitivity in Anticancer Drug Quantification through ZnS@CNS Nanosheets: Synthesis via Accelerated Sonochemical Methodology

Zinc sulfide/graphitic Carbon Nitride binary nanosheets were synthesized by using a novel sonochemical pathway with high electrocatalytic ability. The as- obtained samples were characterized by various analytical methods such as Transmission Electron Microscopy (TEM), Field emission scanning electron microscopy (FESEM), Energy-dispersive X-ray spectroscopy (EDS), X-ray diffraction analysis (XRD), and X-ray photoelectron spectroscopy (XPS) to evaluate the properties of ZnS@CNS synthesized by this new route. Subsequently, the electrical and electrochemical performance of the proposed electrodes were characterized by using EIS and CV to establish an electroactive ability of the nanocomposites. The complete properties like structural and physical of ZnS@CNS were analyzed. As-prepared binary nanocomposite was applied towards the detection of anticancer drug (flutamide) by various electrochemical methods such as cyclic voltammetry (CV), differential pulse voltammetry (DPV) and amperometry. The glassy carbon electrode modified with a ZnS@CNS composite demonstrates a remarkable electrocatalytic efficiency for detecting flutamide in a pH 7.0 (PBS). The composite modified electrode shows synergistic effect of ZnS and CNS catalyst. The electrochemical sensing performance of the linear range was improved significantly due to high electroactive sites and rapid electron transport pathways. Crucially, the electrochemical method was successfully demonstrated in biological fluids which reveals its potential real-time applicability in the analysis of drug.

Enrichment of electrogenic microbes on surface-modified stainless steel 304L for rapid start-up of microbial electrochemical sensors

Stainless steel (SS) 304L, a cost-effective and mechanically robust material, is widely used in microbial electrochemical systems as an anode due to its versatility. However, poor biocompatibility and low corrosion resistance limit its potential. This study explores rapid SS surface modification techniques to enhance the sensitivity of microbial electrochemical sensors. Four coatings, namely electroreduction, carbon-coated, flame oxidised, and graphene-coated, were applied to SS electrodes. Surface morphology and characteristics were examined through FESEM-EDX and Raman profiling. The biosensor start-up and microbial enrichment demonstrated an exponential increase in current density, with carbon-based electrodes outperforming iron-based ones. The modified electrodes exhibited enhanced microbial-electrode interactions, evident in altered electrode potential. Starvation and recovery tests revealed distinct patterns, with carbon-coated electrodes showcasing rapid recovery. The air-in-chamber test indicated immediate loss and subsequent recovery of microbial activities upon water circulation. Surface modification significantly influenced the microbial response, with carbon-based coatings demonstrating superior performance. This study provides valuable insights into SS surface modification for improving microbial electrochemical sensor sensitivity, holding promise for diverse applications in environmental monitoring and biosensing.

Highly Sensitive Wearable Sensor Based on (001)-Orientated TiO2 for Real-Time Electrochemical Detection of Dopamine, Tyrosine, and Paracetamol.

The concentration of dopamine (DA) and tyrosine (Tyr) reflects the condition of patients with Parkinson's disease, whereas moderate paracetamol (PA) can help relieve their pain. Therefore, real-time measurements of these bioanalytes have important clinical implications for patients with Parkinson's disease. However, previous sensors suffer from either limited sensitivity or complex fabrication and integration processes. This work introduces a simple and cost-effective method to prepare high-quality, flexible titanium dioxide (TiO2) thin films with highly reactive (001)-facets. The as-fabricated TiO2 film supported by a carbon cloth electrode (i.e., TiO2-CC) allows excellent electrochemical specificity and sensitivity to DA (1.390µAµM-1cm-2), Tyr (0.126µAµM-1cm-2), and PA (0.0841µAµM-1cm-2). More importantly, accurate DA concentration in varied pH conditions can be obtained by decoupling them within a single differential pulse voltammetry measurement without additional sensing units. The TiO2-CC electrochemical sensor can be integrated into a smart diaper to detect the trace amount of DA or an integrated skin-interfaced patch with microfluidic sampling and wireless transmission units for real-time detection of the sweat Try and PA concentration. The wearable sensor based on TiO2-CC prepared by facile manufacturing methods holds great potential in the daily health monitoring and care of patients with neurological disorders.

Novel 2D CuFe-MOF-based immunoprobe: Addressing antifouling electrochemical immunosensing inadequate sensitivity challenge

Rational design of antifouling interfaces in electrochemical immunosensor was an efficient approach to resist nonspecific adsorption in complex sample. Nonetheless, it remained a challenge, namely, most antifouling materials had poor electrical conductivity and their introduction resulted in high impedance at the sensing interface, greatly reducing the sensitivity of the detection. Herein, a novel immunoprobe was fabricated by utilizing 2D CuFe-MOF composed by Cu and Fe as metal nodes and 1,4-benzenedicarboxylic acid (H2BDC) as an organic ligand. Due to the planar conjugated structure of the ligand, electronic transition can be greatly promoted. This property of the ligand was applied to improve the conductivity of the antifouling sensing interface. Therefore, the sensitivity of the sensor was greatly enhanced. Because of the synergistic catalysis of Fe-Cu bimetallic sites, in presence of H2O2, abundant hydroxyl radicals were generated for further cascade amplification of electrochemical signals. The hyaluronic acid (HA) and 5-serotonin hydrochloride (ST) were cross-linked on electrode to form a hydrogel substrate to resist fouling from serum sample. Given the integration of the novel probe and the antifouling substrate, the method achieved remarkably low limit of detection (2.6 fg mL−1) for squamous cell carcinoma antigen (SCCA) in human serum samples over a wide linear range from 100 fg mL−1 to 100 ng mL−1. The method provided a pervasive route for designing sensitive antifouling interfaces.

Effect of biofouling on electrochemical impedance parameters and sensitivity of polyvinyl alcohol coated Iridium oxide based pH biosensors

Effect of biofouling on electrochemical impedance parameters and sensitivity of polyvinyl alcohol coated Iridium oxide based pH biosensors

A sensitive sandwich-type electrochemical aptasensing platform based on Ti3C2Tx/MoS2/MWCNT@rGONR composites for simultaneous detection of kanamycin and chloramphenicol in food samples.

A Ti3C2Tx/MoS2/MWCNT@rGONR nanocomposite was prepared for the first time for building a sensitive electrochemical aptasening platform to simultaneously detect kanamycin (Kana) and chloramphenicol (Cap). Owing to their accordion-like structure, rich surface groups, and high charge mobility, Ti3C2Tx/MoS2/MWCNT@rGONR composites provided a spacious covalent immobilization surface and a better electrochemical aptasensing platform. The aptamers of Kana and Cap used in sensors enhance the selectivity. Furthermore, TiP, an ion exchanger, was used for loading more different metal ions functioning as labels to form a sandwich-type sensor together with Ti3C2Tx/MoS2/MWCNT@rGONR, improving the electrochemical sensitivity and obtaining a highly distinguishable signal readout. Under the optimized conditions, the sensor has good detection limits of 0.135 nmol L-1 and 0.173 nmol L-1 for Kana and Cap, respectively, at the same linearity concentration of 0.5-2500 nmol L-1. Finally, it was successfully applied for detection in milk and fish meat, and the results were compared with the standard method HPLC, indicating its great potential for food safety monitoring.

An on-site and portable electrochemical sensing platform based on spinel zinc ferrite nanoparticles for the quality control of paracetamol in pharmaceutical samples.

In this study, crystalline spinel zinc ferrite nanoparticles (ZnFe2O4 NPs) were successfully prepared and proposed as a high-performance electrode material for the construction of an electrochemical sensing platform for the detection of paracetamol (PCM). By modifying a screen-printed carbon electrode (SPE) with ZnFe2O4 NPs, the electrochemical characteristics of the ZnFe2O4/SPE and the electrochemical oxidation of PCM were investigated by cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS), chronoamperometry (CA), and differential pulse voltammetry (DPV) methods. The calculated electrochemical kinetic parameters from these techniques including electrochemically active surface area (ECSA), peak-to-peak separation (ΔEp), charge transfer resistance (Rct), standard heterogeneous electron-transfer rate constants (k0), electron transfer coefficient (α), catalytic rate constant (kcat), adsorption capacity (Γ), and diffusion coefficient (D) proved that the as-synthesized ZnFe2O4 NPs have rapid electron/mass transfer characteristics, intrinsic electrocatalytic activity, and facilitate the adsorption-diffusion of PCM molecules towards the modified electrode surface. As expected, the ZnFe2O4/SPE offered excellent analytical performance towards sensing of PCM with a detection limit of 0.29 μM, a wide linear range of 0.5-400 μM, and high electrochemical sensitivity of 1.1 μA μM-1 cm-2. Moreover, the proposed ZnFe2O4-based electrochemical nanosensor also exhibited good repeatability, high anti-interference ability, and practical feasibility toward PCM sensing in a pharmaceutical tablet. Based on these observations, the designed electrochemical platform not only provides a high-performance nanosensor for the rapid and highly efficient detection of PCM but also opens a new avenue for routine quality control analysis of pharmaceutical formulations.

Urchin-like CoP3/Cu3P heterostructured nanorods supported on a 3D porous copper foam for high-performance non-enzymatic electrochemical dopamine sensors.

In this study, we developed a high-performance non-enzymatic electrochemical sensor based on urchin-like CoP3/Cu3P heterostructured nanorods supported on a three-dimensional porous copper foam, namely, CoP3/Cu3P NRs/CF, for the detection of dopamine. Benefiting from the promising intrinsic catalytic activities of CoP3 and Cu3P, urchin-like microsphere structures, and a large electrochemically active surface area for exposing numerous accessible catalytic active sites, the proposed CoP3/Cu3P NRs/CF shows extraordinary electrochemical response towards the electrocatalytic oxidation of dopamine. As a result, the CoP3/Cu3P NRs/CF sensing electrode has a broad detection window (from 0.2 to 2000 μM), low detection limit (0.51 μM), high electrochemical sensitivity (0.0105 mA μM-1 cm-2), excellent selectivity towards dopamine in the coexistence of some interfering species, and good stability for dopamine determination. More importantly, the CoP3/Cu3P NRs/CF catalyst also exhibits excellent catalytic activity, sensitivity, and selectivity for dopamine detection under simulated human body conditions at a physiological pH of 7.25 (0.1 M PBS) at 36.6 °C.

Impact of ZnO Decoration on Electronic Properties of Alkyl Substituted Thiophene–Carbazole Copolymer

This study analyzes the impact of zinc oxide (ZnO) decoration on the structure, stability and electronic properties of the alkyl-substituted thiophene-vinyl carbazole (3-MeTH-VCZ) copolymer, employing density functional theory (DFT)-based quantum atomistix toolkit (ATK) software. This analysis shows a negative interaction energy between the ZnO and the pristine 3-MeTH-VCZ, facilitating substantial charge transfer. Furthermore, the composite (3-MeTH-VCZ-ZnO) formed by the decoration of ZnO in the pristine 3-MeTH-VCZ shows improved electronic properties compared to its pristine counterpart. This improvement is evidenced by an approximate 62% reduction in the highest occupied molecular orbital (HOMO)-lowest unoccupied molecular orbital (LUMO) gap, confirmed by shifts observed in the molecular energy spectrum (MES) and density of state (DOS) profiles. The reduction in the HOMO-LUMO gap suggests enhanced physicochemical and electrochemical sensitivity of the synthesized composites to external stimuli, making them promising candidates for sensing and optoelectronic devices.

Graphene Pseudoreference Electrode for the Development of a Practical Paper-Based Electrochemical Heavy Metal Sensor.

Paper-based electrochemical devices (PEDs) have emerged as versatile platforms that bridge analytical chemistry and materials science, demonstrating advantages of portability, cost-effectiveness, and environmental sustainability. This study investigates the integration of a graphene pseudoreference electrode (GPRE) into a PED, and it exhibits potential advantages over the traditional Ag/AgCl pseudoreference electrode (PRE). In addition, the electrochemical properties and stability of GPRE are compared with those of the traditional Ag/AgCl PRE. The results demonstrate that GPRE exhibits a stable and reproducible potential during electrochemical measurement throughout 180 days, demonstrating its suitability as an alternative to an expensive metal PRE. Furthermore, a GPRE-incorporated paper-based device is designed and evaluated for use in the electrochemical detection of cadmium (Cd) and lead (Pb) using an in situ bismuth-modified electrode. The GPRE-incorporated PED exhibited good analytical performance, with a low limit of detection of 0.69 and 5.77 ng mL-1 and electrochemical sensitivities of 70.16 and 38.34 μA·mL·μg-1·cm-2 for Cd(II) and Pb(II), respectively. More than 99.9% accuracy of the sensor was obtained for both ions with respect to conventional inductively coupled plasma-mass spectrometry. The results highlight the effectiveness and suitability of the GPRE-incorporated PED as a sensor for various applications, such as environmental monitoring, food quality control, and medical diagnostics.

Influence of phase structure of MnO2 for enhancing the electrochemical sensitivity of environmental pollutant chlortetracycline

Electrochemical sensing of chlortetracycline (CTC) using α and β- MnO2 nanowires has been studied. The influence of different phase structures (α and β) of MnO2 nanowires on the determination of chlortetracycline (CTC) was studied systematically. To enhance the sensitivity of MnO2, a high conductivity microporous carbon (MC) was employed as a support matrix for MnO2. The electrochemical sensing results illustrate that the α-MnO2 exhibited better electrochemical performance than β-MnO2. This better activity was correlated with its excellent properties like more exposed MnO6 edges, higher conductivity, and lowest average oxidation state . The kinetics study illustrated that the MnO2 modified electrodes perform much better than the bare electrodes. The number of electron transfer, electron transfer coefficient, and diffusion coefficient of CTC were calculated from the scan rate effect; the values are 1, 0.50, and 1.581 × 10−6 cm2 s−1 respectively. Amperometry was used to calculate the lowest detection limit (LOD) at a potential of 0.82 V. The α-MnO2/MC electrode exhibits a better linear range (1–55 µM) with a LOD value of 103 nM towards CTC. Furthermore, the proposed sensor exhibited better anti-interference ability towards KCl, kanamycin sulfate, zinc acetate, magnesium chloride, tetracycline, streptomycin sulfate, and oxytetracycline. The sensor's ability to accurately determine the level of CTC in samples of drinking water, tap water, poultry farm soil, and milk highlights its suitability for industrial applications. The developed sensor showed better reproducibility (RSD=0.45%) and repeatability (RSD=2.06%) towards CTC. Therefore, the proposed sensor can be used as a more practical platform for monitoring environmental contaminants.

Co‐Encapsulating Enzymes and Carbon Dots in Metal–Organic Frameworks for Highly Stable and Sensitive Touch‐Based Sweat Sensors

AbstractWearable metabolite sensors are often limited by easily denaturable enzymes that only allow short‐duration monitoring. Although encapsulating enzymes in metal–organic frameworks (MOFs) shows promise of long‐term enzyme protection, it is typically accompanied by significantly decreased activity due to increased diffusion barrier, steric hindrance for enzyme‐substrate binding, and poor enzyme‐electronic interface. Herein, the co‐encapsulation of enzymes and ultrasmall arginine‐derived carbon dots (Argdot) into a mesoporous Zeolitic Imidazolate Framework‐8 (mZIF‐8) matrix and the enhancement effect of Argdot on enzyme stability and activity, which consequently improves the electrochemical sensor's long‐term sensitivity are investigated. Specifically, the glucose oxidase (GOx)‐Argdot@mZIF‐8 nanocomposite consistently exhibits 40% higher electrochemical sensitivity compared to control GOx@mZIF‐8, an improvement similarly demonstrated with another model enzyme lactate oxidase (LOx). Furthermore, GOx‐Argdot@mZIF‐8 displays excellent stability, retaining 100% of initial sensitivity over 30 days of repeated testing at 37 °C. A touch‐based glucose sensor prototype is demonstrated as an excellent reusable sensor to monitor finger‐tip sweat glucose levels over one month at room temperature. This enzyme encapsulation strategy is not only useful for developing reusable sweat sensors with long‐term monitoring capability, but also promising to expand the industry use of enzymes under harsh conditions.

New Au/chitosan nanocomposite modified carbon paste sensor for voltammetric detection of nicotine

A profoundly touchy voltammetric sensor for detection of nicotine (NIC) in urine and tobacco specimens has been developed in light of the boosted electrochemical response of NIC at gold and chitosan nanocomposite modified carbon paste electrode (ACMCPE). Material characterization techniques Scanning Electron Microscope and Energy Dispersive X-ray (SEM & EDX) were utilized to describe the ACMCPE surface material. The impedance spectroscopy technique (EIS), cyclic voltammetry (CV), chronoamperometry (CA), and differential pulse voltammetry (DPV) were employed to explore the electrochemical sensing of NIC at ACMCPE. The created sensor exhibits an exceptional electrochemical sensitivity to NIC in a universal Britton–Robinson (B-R) buffer solution with a pH range of 2.0 to 8.0. The sensor shows a linear response over NIC concentration ranges of 4.0–320.0 µM, with the detection limit (LOD) of 7.6 µM. The prepared sensor has been shown to be exceptionally viable in detecting NIC with amazing selectivity and reproducibility. We suggest it as a trustworthy and useful electrochemical sensor for NIC location.

Chitosan stabilized copper iodide nanoparticles enabled nano-bio-engineered platform for efficient electrochemical biosensing of dopamine

Neurodegenerative disorders are one of the significant challenges to the aging society, as per the United Nations, where 1 in 6 people globally over 65 years of age are expected to suffer by 2050. The exact pathophysiological root of these disorders is although not known adequately, but reduced dopamine (most significant neurotransmitters) levels have been reported in people affected by Parkinson's disease. Sensitive detection and effective monitoring of dopamine can help to diagnose these neurodegenerative disorders at a very early stage, which will help to properly treat these disorders and slow down their progression. Therefore, it is crucial to detect physiological and clinically acceptable amounts of dopamine with high sensitivity and selectivity in basic pathophysiology research, medication, and illness diagnosis. Here in this present investigation, nano-bio-engineered stable chitosan stabilized copper iodide nanoparticles (CS@CuI NPs) were synthesized to engineer the active biosensing platform for developing dopamine biosensors. Initially, the as-synthesized nano-bio-engineered CS@CuI NPs were subjected to its drop-casting onto an Indium tin oxide (ITO) conducting glass substrate. This substrate platform was then utilized to immobilize tyrosinase (Tyr) enzyme by drop-casting to fabricate Tyr/CS@CuI NPs/ITO bioelectrode for the ultrasensitive determination of dopamine. Several techniques were used to characterize the structural, optical, and morphological properties of the synthesized CS@CuI NPs and Tyr/CS@CuI NPs/ITO bioelectrode. Further, the as-prepared bioelectrode was evaluated for its suitability and electrocatalytic behaviour towards dopamine by cyclic voltammetry. A perusal of the electroanalytic results of the fabricated biosensor revealed that under the optimized experimental conditions, Tyr/CS@CuI NPs/ITO bioelectrode exhibits a very high electrochemical sensitivity of 11.64 μA μM−1 cm−2 towards dopamine with the low limit of detection and quantification of 0.02 and 0.386 μM, respectively. In addition, the fabricated bioelectrode was stable up to 46 days with only 4.82 % current loss, reusable till 20 scans, and it also performed effectively while real sample analysis. Therefore, the nano-bio-engineered biosensor platform being reported can determine deficient dopamine levels in a very selective and sensitive manner, which can help adequately manage neurodegenerative disorders, further slowing down the disease progression.