Electrocatalytic Oxidation Of Glycerol Research Articles

Dynamic Fe-O-Cu induced electronic structure modulation on CuOx electrode for selective electrocatalytic oxidation of glycerol

Electrocatalytic glycerol oxidation reaction to produce high-value organic chemicals has research significance for managing the overproduction of glycerol and handling the energy crisis. Herein, a copper-based self-supporting catalytic electrode with a dynamic Fe-O-Cu optimized coordination (Fe-CuOx/CF) was prepared. The oxygen-bridged asymmetric coordination structure (Fe-O-Cu) optimized the electronic configuration and promoted the formation of the crucial intermediate species. After Fe was embedded in the lattice of copper oxides, a remarkable enhancement in the adsorption capacity of OH- and glycerol was confirmed. As a result, Fe-CuOx/CF exhibited an excellent production capacity of formate, with high faradaic efficiency and selectivity values of 93.65 % and 95.10 %. Concurrent production of formate and high purity hydrogen was achieved in the double-electrode flow electrolyzer. This work provides guiding significance for the optimization of the catalytic coordination and the design of high-efficiency transition metal-based catalysts for electrooxidation of biomass platform molecules.

Efficient Electrocatalytic Oxidation of Glycerol to Formate Coupled with Nitrate Reduction over Cu-Doped NiCo Alloy Supported on Nickel Foam.

Electrooxidation of biomass-derived glycerol which is regarded as a main byproduct of industrial biodiesel production, is an innovative strategy to produce value-added chemicals, but currently showcases slow kinetics, limited Faraday efficiency, and unclear catalytic mechanism. Herein, we report high-efficiency electrooxidation of glycerol into formate via a Cu doped NiCo alloy catalyst supported on nickel foam (Cu-NiCo/NF) in a coupled system paired with nitrate reduction. The designed Cu-NiCo/NF delivers only 1.23 V vs. RHE at 10 mA cm-2, and a record Faraday efficiency of formate of 93.8 %. The superior performance is ascribed to the rapid generation of NiIII-OOH and CoIII-OOH species and favorable coupling of surface *O with reactive intermediates. Using Cu-NiCo/NF as a bifunctional catalyst, the coupled system synchronously produces NH3 and formate, showing 290 mV lower than the coupling of hydrogen evolution reaction, together with excellent long-term stability for up to 144 h. This work lays out new guidelines and reliable strategies from catalyst design to system coupling for biomass-derived electrochemical refinery.

Efficient Electrocatalytic Oxidation of Glycerol to Formate Coupled with Nitrate Reduction over Cu‐Doped NiCo Alloy Supported on Nickel Foam

AbstractElectrooxidation of biomass‐derived glycerol which is regarded as a main byproduct of industrial biodiesel production, is an innovative strategy to produce value‐added chemicals, but currently showcases slow kinetics, limited Faraday efficiency, and unclear catalytic mechanism. Herein, we report high‐efficiency electrooxidation of glycerol into formate via a Cu doped NiCo alloy catalyst supported on nickel foam (Cu−NiCo/NF) in a coupled system paired with nitrate reduction. The designed Cu−NiCo/NF delivers only 1.23 V vs. RHE at 10 mA cm−2, and a record Faraday efficiency of formate of 93.8 %. The superior performance is ascribed to the rapid generation of NiIII−OOH and CoIII−OOH species and favorable coupling of surface *O with reactive intermediates. Using Cu−NiCo/NF as a bifunctional catalyst, the coupled system synchronously produces NH3 and formate, showing 290 mV lower than the coupling of hydrogen evolution reaction, together with excellent long‐term stability for up to 144 h. This work lays out new guidelines and reliable strategies from catalyst design to system coupling for biomass‐derived electrochemical refinery.

Electrocatalytic oxidation of glycerol performed by nickel/cobalt alloys: Adding value to a common subproduct of chemical industry

The present work shows the electrocatalytical performance of nickel/cobalt alloys towards the conversion of glycerol into higher value molecules, such as glycolic acid, oxalic acid, maleic acid, diethylene glycol and ethylene glycol, identified by chromatographic technique. To do so, the alloy was directly electrodeposited on graphite electrodes, which is a simple, readily available and cheap material, the modified electrodes were characterized by scanning electron microscopy, infrared spectroscopy and electrochemical analysis. Kinetic parameters were obtained using by both Galus methodology and rotating disc electrode (RDE), obtaining the better electrocatalytic modified electrode and the total number of electrons transferred per mol of glycerol. The modified electrode labeled as Ni0.8Co0.2(OH)2 proportion has achieved the highest glycerol conversion after 4 h of reaction, approximately 99.8%, with an energy consumption of 36.38 W/mol.

The role of coordinating anions in the supporting electrolyte during the electrocatalytic oxidation of glycerol on Pt electrodes

This research explores the glycerol electrooxidation reaction (GEOR) on a platinum electrode, with a special emphasis on the role of the chemical properties of the anion present in the electrolyte composition. Essential knowledge of the mechanism and dynamics of glycerol electrooxidation is obtained through comprehensive studies that involve in situ FTIR measurements and the analysis of electrochemically oscillatory responses. This study addresses on the complex interplay between anion adsorption strength and the GEOR, focusing on the differences in CO adsorption coverage, which is the main strongly adsorbed intermediate. The anion adsorption strength, with the order HClO4 < H2SO4 < H3PO4, affects significantly not only the CO coverage on the platinum surface but also the overall glycerol electrooxidation rate. The observed differences in the electroactivity are attributed to competitive adsorption phenomena, in which specific coordinated ions have greater adsorption capabilities than perchlorate ions. These findings highlight the critical relevance of designing and optimizing electrocatalysts for glycerol electrooxidation and related processes with careful consideration of the electrolyte composition, notably the anion.

Ni/P clusters perform as a reaction switch dispersed on co-based electrocatalyst for glycerol oxidation coupling with alkaline hydrogen production

In this work, Ni/P clusters have been successfully decorated onto the surface of Co nanoparticles. The surface decoration with Ni/P clusters greatly enhance the electron interaction in the catalytic system. The optimized catalyst exhibits a high activity for electrocatalytic glycerol oxidation coupling with alkaline hydrogen evolution reaction. A hydrogen-producing electrolysis cell with formate faradaic efficiency of 64.5 % has been assembled, which can achieve a decomposition voltage as low as 1.37 V at a current density of 10 mA cm−2. More importantly Ni/P clusters not only serve as real active sites, but also as reaction switches to regulate the progress of oxygen evolution reaction and glycerol oxidation reactions via tunning the reaction pathway. This study provides a scientific insight into developing future reaction switch for electrocatalysis.

Electrocatalytic and Selective Oxidation of Glycerol to Formate on 2D 3d-Metal Phosphate Nanosheets and Carbon-Negative Hydrogen Generation.

In the landscape of green hydrogen production, alkaline water electrolysis is a well-established, yet not-so-cost-effective, technique due to the high overpotential requirement for the oxygen evolution reaction (OER). A low-voltage approach is proposed to overcome not only the OER challenge by favorably oxidizing abundant feedstock molecules with an earth-abundant catalyst but also to reduce the energy input required for hydrogen production. This alternative process not only generates carbon-negative green H2 but also yields concurrent value-added products (VAPs), thereby maximizing economic advantages and transforming waste into valuable resources. The essence of this study lies in a novel electrocatalyst material. In the present study, unique and two-dimensional (2D) ultrathin nanosheet phosphates featuring first-row transition metals are synthesized by a one-step solvothermal method, and evaluated for the electrocatalytic glycerol oxidation reaction (GLYOR) in an alkaline medium and simultaneous H2 production. Co3(PO4)2 (CoP), Cu3(PO4)2 (CuP), and Ni3(PO4)2 (NiP) exhibit 2D sheet morphologies, while FePO4 (FeP) displays an entirely different snowflake-like morphology. The 2D nanosheet morphology provides a large surface area and a high density of active sites. As a GLYOR catalyst, CoP ultrathin (∼5 nm) nanosheets exhibit remarkably low onset potential at 1.12 V (vs RHE), outperforming that of NiP, FeP, and CuP around 1.25 V (vs RHE). CoP displays 82% selective formate production, indicating a superior capacity for C-C cleavage and concurrent oxidation; this property could be utilized to valorize larger molecules. CoP also exhibits highly sustainable electrochemical stability for a continuous 200 h GLYOR operation, yielding 6.5 L of H2 production with a 4 cm2 electrode and 98 ± 0.5% Faradaic efficiency. The present study advances our understanding of efficient GLYOR catalysts and underscores the potential of sustainable and economically viable green hydrogen production methodologies.

In situ patterning of nickel/sulfur-codoped laser-induced graphene electrode for selective electrocatalytic valorization of glycerol

The electrocatalytic valorization of glycerol is an emerging upcycling process for the biomass utilization. In this work, nickel/sulfur-codoped laser-induced graphene (LINiSG) on flexible polyimide film was fabricated and demonstrated as a self-supported and binder-free monolithic electrode for electrocatalytic glycerol oxidation reaction (EGOR) towards the selective generation of value-added three-carbon (C3) chemicals. The laser-induced in-situ and synchronous carbonization of polysulfone and Ni precursor was demonstrated to remarkably promote both the electrochemical surface area and Ni loading of LINiSG electrode. These synergistic merits are considered as the main origin for its enhanced EGOR activity and stability, showing much smaller Tafel slope and 2-fold enhanced current density, as compared to LINiG electrode without the co-carbonization of polysulfone. The influence of experimental parameters has been systematically investigated by the product analysis, achieving an average 94.7 % C3 selectivity and 76.1 % C3 Faradaic efficiency with a high selectivity of dihydroxyacetone (ca. 67.7 %) in near-neutral conditions, which is better than most of the reported EGOR electrodes operated in near-neutral conditions. This work demonstrated the viability of using flexible self-supported and binder-free LIG electrode with rational design and preparation approach for electrocatalytic valorization of biomass.

Stable Operation of Paired CO2 Reduction/Glycerol Oxidation at High Current Density.

Despite the considerable efforts made by the community, the high operation cell voltage of CO2 electrolyzers is still to be decreased to move toward commercialization. This is mostly due to the high energy need of the oxygen evolution reaction (OER), which is the most often used anodic pair for CO2 reduction. In this study, OER was replaced by the electrocatalytic oxidation of glycerol using carbon-supported Pt nanoparticles as an anode catalyst. In parallel, the reduction of CO2 to CO was performed at the Ag cathode catalyst using a membraneless microfluidic flow electrolyzer cell. Several parameters were optimized, starting from the catalyst layer composition (ionomer quality and quantity), through operating conditions (glycerol concentration, applied electrolyte flow rate, etc.), to the applied electrochemical protocol. By identifying the optimal conditions, a 75-85% Faradaic efficiency (FE) toward glycerol oxidation products (oxalate, glycerate, tartronate, lactate, glycolate, and formate) was achieved at 200 mA cm-2 total current density while the cathodic CO formation proceeded with close to 100% FE. With static protocols (potentio- or galvanostatic), a rapid loss of glycerol oxidation activity was observed during the long-term measurements. The anode catalyst was reactivated by applying a dynamic potential step protocol. This allowed the periodic reduction, hence, refreshing of Pt, ensuring stable, continuous operation for 5 h.

Pulse potential mediated selectivity for the electrocatalytic oxidation of glycerol to glyceric acid

Preventing the deactivation of noble metal-based catalysts due to self-oxidation and poisonous adsorption is a significant challenge in organic electro-oxidation. In this study, we employ a pulsed potential electrolysis strategy for the selective electrocatalytic oxidation of glycerol to glyceric acid over a Pt-based catalyst. In situ Fourier-transform infrared spectroscopy, quasi-in situ X-ray photoelectron spectroscopy, and finite element simulations reveal that the pulsed potential could tailor the catalyst’s oxidation and surface micro-environment. This prevents the overaccumulation of poisoning intermediate species and frees up active sites for the re-adsorption of OH adsorbate and glycerol. The pulsed potential electrolysis strategy results in a higher glyceric acid selectivity (81.8%) than constant-potential electrocatalysis with 0.7 VRHE (37.8%). This work offers an efficient strategy to mitigate the deactivation of noble metal-based electrocatalysts.

Integration of theory prediction and experimental electrooxidation of glycerol on NiCo2O4 nanosheets

Electrocatalytic refinery of low-value biomass-based glycerol into value-added chemicals formic acid (FA) is an attractive alternative to traditional thermochemical refineries. However, constructing non-precious catalysts with abundant active hydroxyl (OH*) is the main obstacle to the electrocatalytic glycerol oxidation reaction (EGOR). Herein, we combine density functional theory (DFT) and experiments to investigate EGOR over the finely constructed NiCo2O4 nanosheets. DFT results firstly indicate that the NiCo2O4 nanosheets exhibit the highly hydroxylated (311)-OH* surface with the lowest Gibbs free energy, which significantly improves the electrochemical reaction kinetics and can achieve desirable FA yield by adjusting the adsorption energy of the adsorption intermediate. Following the theoretical prediction, ultrathin NiCo2O4 nanosheets (~1.70 nm) are fabricated by a facile electrodeposition method with sufficient OH* on the surface. The charge-transfer resistance of NiCo2O4 nanosheets in EGOR is only 0.94 Ω and the anode power consumption can be reduced by up to 320 mV at 10 mA cm−2, keeping the high glycerol conversion (89%) and FA selectivity (70%) during the 120-h stability test. DFT calculations and experimental tools (e.g., multi-potential step experiments, operational electrochemical impedance spectroscopy) confirm that OH* in-situ generated on the thin nanosheets structure is essential in facilitating charge transfer between catalysts and adsorbed molecules to enhance C–C bond cleavage. This work offers a guideline for the rational design of robust catalysts for the selective upgrading of biomass-derived chemicals.

Vacancy Optimized Coordination on Nickel Oxide for Selective Electrocatalytic Oxidation of Glycerol

Vacancy Optimized Coordination on Nickel Oxide for Selective Electrocatalytic Oxidation of Glycerol

Unveiling the mechanism of electrocatalytic oxidation of glycerol by in-situ electrochemical spectroscopy

The electrocatalytic glycerol oxidation reaction (GOR) is an efficient way to reduce the overpotential of the anodic reaction of electrocatalytic water splitting with abundant high-value byproducts. However, it has always been difficult to reveal a clear reaction path and real active site during the electrocatalytic glycerol oxidation reaction (GOR) process. In this work, NiOOH/Ni3S2/NF, a model catalyst was synthesized by the two-step method, and the reaction path of the electrocatalytic oxidation of glycerol on NiOOH/Ni3S2/NF was clearly unveiled by the in situ infrared and Raman analysis. In addition, the TEM after GOR and in-situ Raman intuitively demonstrated that the NiOOH was the real active site during the GOR process. Consequently, the synthesized NiOOH/Ni3S2/NF catalyst achieved a current density of 10 mA cm−2 at 1.227 V vs. RHE and obtained a high formic acid Faraday efficiency of 97.7 % at a low potential of 1.4 V vs. RHE. This work demonstrates an effective method for unveiling the GOR mechanism and the other relevant electrocatalytic reaction processes.

Anode Catalysts for Electrocatalytic Alcohol Oxidation Coupled to CO2 Reduction in Continuous-Flow Electrolyzers

Thanks to the intense scientific interest, the field of CO2 electrolysis witnessed remarkable progress (industrially relevant partial current densities, selective electrocatalysts towards small molecule products, multi-cell stacks, etc.) in the past decade. However, despite all these efforts, the energy efficiency of CO2 electrolyzers is still relatively low, which is rooted in the large cell voltages. A reason behind this is that the kinetically sluggish water oxidation (OER) is performed at the anode in parallel with CO2 reduction (CO2RR) at the cathode. This issue can be circumvented by coupling CO2RR with alternative anode processes, resulting in smaller cell voltage (better energy efficiency) along with the possible generation of products at the anode with high market value. Thus, maximizing the potential of utilizing waste carbon sources to generate value-added products. Such alternative reactions include, for example, the electrocatalytic oxidation of chloride ions, aliphatic and aromatic alcohols, amines, urea, hydrazine, and numerous biomass-derived substances such as 5-(hydroxymethyl)furfural, sorbitol, etc.In this study, CO2RR to CO was driven at the cathode, and the electrocatalytic oxidation of glycerol (GOR) was performed at the anode of a small (1 cm2 active surface area) microfluidic electrolyzer cell. Ir black was replaced by carbon-supported Pt nanoparticles, while Ag nanoparticles were used as the cathode catalyst. During our experiments, we identified four main factors influencing the GOR activity and selectivity: i) the quality and quantity of the used ionomer, ii) the electrolyte flow rate, iii) glycerol concentration, and iv) the applied anode potential. The latter was particularly important since Pt showed the highest activity toward GOR in a potential window where its surface starts to oxidize. The formation of a continuous oxide layer has to be avoided since it inhibits the alcohol oxidation reaction. By setting optimal conditions, a close to 100% Faradic efficiency (FE) toward CO formation on the cathode and between 70-80% FE toward GOR was achieved above 200 mA cm-2 total current density. The amount of the formed products were tracked by mass spectrometry, gas-, and high-performance liquid chromatography, and nuclear magnetic resonance spectroscopy. Dihydroxyacetone, glycerate, glycolate, oxalate, tartronate, formate, and lactate were identified as GOR products. The missing charge was attributed to the formation and a small amount of CO2. To improve the stability and selectivity of Pt in GOR, semipermeable metal oxide layers were introduced to the top of the catalyst layer. The thin films were synthesized by electrodeposition in different thicknesses. Based on our measurements, a set of criteria were defined regarding the composition of the anode catalyst layer (ionomer, co-catalyst overlayer, etc.), the composition of the electrolyte solution, and the applied electrochemical protocol to allow stable and selective GOR at high achievable current densities.

Enhanced electrocatalytic glycerol oxidation on CuCoN0.6/CP at significantly reduced potentials

Electrocatalytic alcohol oxidation coupled with the hydrogen evolution reaction, wherein a thermodynamically favorable oxidation reaction replaces the sluggish kinetics of the oxygen evolution reaction, has recently attracted considerable attention. However, the development of nonprecious-metal electrocatalysts capable of delivering much lower oxidation potentials holds great significance. In this study, we proposed and developed CuCoN0.6 nanowires loaded on conductive carbon paper (denoted as CuCoN0.6/CP) as an efficient catalyst for selective glycerol oxidation to formate. Our catalyst achieved a remarkably high faradic efficiency of 90.0% towards formate production. More notably, it required an anode potential as low as 1.07 V to achieve a current density of 10 mA cm−2, a significantly lower potential than that reported in the literature. Experimental characterizations reveal that the oxidations of Cu+ and Co2+ ions promoted the formation of reactive hydroxyl species, which are responsible for the substantially reduced oxidation potential and enhanced glycerol oxidation performance. Furthermore, we investigated the reaction pathway of glycerol oxidation and structural changes in the catalysts. The catalyst reconstruction led to the formation of CoOOH, which is considered as the active site for glycerol oxidation. Finally, we successfully separated high-purity and value-added potassium diformate product. This work not only advances the electrocatalytic conversion of biomass-derived alcohols but also provides insights into the design of electrocatalysts with broad applications.

Electrocatalytic Oxidation of Glycerol using Electrolessly Deposited CuNiSnP Electrocatalysts Supported on Carbon in Alkaline Media

Electrocatalytic Oxidation of Glycerol using Electrolessly Deposited CuNiSnP Electrocatalysts Supported on Carbon in Alkaline Media

Seeded Synthesis of Hollow PdSn Intermetallic Nanomaterials for Highly Efficient Electrocatalytic Glycerol Oxidation.

Intermetallic nanomaterials have shown promising potential as high-performance catalysts in various catalytic reactions due to their unconventional crystal phases with ordered atomic arrangements. However, controlled synthesis of intermetallic nanomaterials with tunable crystal phases and unique hollow morphologies remains a challenge. Here, a seeded method is developed to synthesize hollow PdSn intermetallic nanoparticles (NPs) with two different intermetallic phases, that is, orthorhombic Pd2 Sn and monoclinic Pd3 Sn2 . Benefiting from the rational regulation of the crystal phase and morphology, the obtained hollow orthorhombic Pd2 Sn NPs deliver excellent electrocatalytic performance toward glycerol oxidation reaction (GOR), outperforming solid orthorhombic Pd2 Sn NPs, hollow monoclinic Pd3 Sn2 NPs, and commercial Pd/C, which places it among the best reported Pd-based GOR electrocatalysts. The reaction mechanism of GOR using the hollow orthorhombic Pd2 Sn as the catalyst is investigated by operando infrared reflection absorption spectroscopy, which reveals that the hollow orthorhombic Pd2 Sn catalyst cleaves the CC bond more easily compared to the commercial Pd/C. This work can pave an appealing route to the controlled synthesis of diverse novel intermetallic nanomaterials with hollow morphology for various promising applications.

Amorphous antimony oxide as reaction pathway modulator toward electrocatalytic glycerol oxidation for selective dihydroxyacetone production

Achievement of an efficient and stable electrocatalytic glycerol oxidation reaction (EGOR) is limited by a lack of strategies for designing advanced electrocatalysts that satisfy the desired product selectivity, high electrocatalytic activity, and stability. Here, we report that the reaction pathway of EGOR can be modulated by the incorporation of amorphous antimony oxide (SbOx) on the surface of a Pt nanoparticle electrocatalyst (SbOx-Pt), which creates highly selective glycerol oxidation to dihydroxyacetone (DHA), one of the most valuable products of EGOR. The selective control of adsorption behaviors of glycerol oxidation products allows for SbOx to act as a reaction pathway modulator. Moreover, SbOx deposition on a Pt surface also enhances the stability, electrocatalytic activity, and glycerol conversion of the Pt electrocatalyst, and thus promotes the EGOR. As a result, the SbOx-Pt electrocatalyst achieves a high DHA selectivity of 81.1%, which is about 11 times higher than that of commercial Pt/C electrocatalysts.

Electrocatalytic Oxidation of Glycerol to Value-Added Compounds on Pd Nanocrystals

Electrocatalytic Oxidation of Glycerol to Value-Added Compounds on Pd Nanocrystals

Radiolysis-Assisted Direct Growth of Gold-Based Electrocatalysts for Glycerol Oxidation.

The electrocatalytic oxidation of glycerol by metal electrocatalysts is an effective method of low-energy-input hydrogen production in membrane reactors in alkaline conditions. The aim of the present study is to examine the proof of concept for the gamma-radiolysis-assisted direct growth of monometallic gold and bimetallic gold-silver nanostructured particles. We revised the gamma radiolysis procedure to generate free-standing Au and Au-Ag nano- and micro-structured particles onto a gas diffusion electrode by the immersion of the substrate in the reaction mixture. The metal particles were synthesized by radiolysis on a flat carbon paper in the presence of capping agents. We have integrated different methods (SEM, EDX, XPS, XRD, ICP-OES, CV, and EIS) to examine in detail the as-synthesized materials and interrogate their electrocatalytic efficiency for glycerol oxidation under baseline conditions to establish a structure-performance relationship. The developed strategy can be easily extended to the synthesis by radiolysis of other types of ready-to-use metal electrocatalysts as advanced electrode materials for heterogeneous catalysis.