Electrocatalysts For Oxygen Reduction Reaction Research Articles

Spin Manipulation of Heterogeneous Molecular Electrocatalysts by an Integrated Magnetic Field for Efficient Oxygen Redox Reactions.

Understanding the spin-dependent activity of nitrogen-coordinated single metal atom (M-N-C) electrocatalysts for oxygen reduction and evolution reactions (ORR and OER) remains challenging due to the lack of structure-defined catalysts and effective spin manipulation tools. Herein, both challenges using a magnetic field integrated heterogeneous molecular electrocatalyst prepared by anchoring cobalt phthalocyanine (CoPc) deposited carbon black on polymer-protected magnet nanoparticles, are addressed. The built-in magnetic field can shift the Co center from low- to high-spin (HS) state without atomic structure modification, affording one-order higher turnover frequency, a 50% increased H2O2 selectivity for ORR, and a ≈4000% magnetocurrent enhancement for OER. This catalyst can significantly minimize magnet usage, enabling safe and continuous production of a pure H2O2 solution for 100 h from a 100 cm2 electrolyzer. The new strategy demonstrated here also applies to other metal phthalocyanine-based catalysts, offering a universal platform for studying spin-related electrochemical processes.

Earth-Abundant Divalent Cation High-Entropy Spinel Ferrites as Bifunctional Electrocatalysts for Oxygen Evolution and Reduction Reactions

Earth-Abundant Divalent Cation High-Entropy Spinel Ferrites as Bifunctional Electrocatalysts for Oxygen Evolution and Reduction Reactions

Modulating Spin of Atomic Manganese Center for High-Performance Oxygen Reduction Reaction.

Single atom catalysts (SACs) are promising non-precious catalysts for oxygen reduction reaction (ORR). Unfortunately, the ORR SACs usually suffer from unsatisfactory activity and in particular poor stability. Herein, we report atomically dispersed manganese (Mn) embedded on nitrogen and sulfur co-doped graphene as an efficient and robust electrocatalyst for ORR in alkaline electrolyte, realizing a half-wave potential (E1/2) of 0.883 V vs. reversible hydrogen electrode (RHE) with negligible activity degradation after 40,000 cyclic voltammetry (CV) cycles in 0.1 M KOH. Introducing sulfur (S) to form Mn-S coordination changes the spin state of single Mn atom from high-spin to low-spin, which effectively optimizes the oxygen intermediates adsorption over the single Mn atomic sites and thus greatly improves the ORR activity.

Modulating Spin of Atomic Manganese Center for High‐Performance Oxygen Reduction Reaction

Single atom catalysts (SACs) are promising non‐precious catalysts for oxygen reduction reaction (ORR). Unfortunately, the ORR SACs usually suffer from unsatisfactory activity and in particular poor stability. Herein, we report atomically dispersed manganese (Mn) embedded on nitrogen and sulfur co‐doped graphene as an efficient and robust electrocatalyst for ORR in alkaline electrolyte, realizing a half‐wave potential (E1/2) of 0.883 V vs. reversible hydrogen electrode (RHE) with negligible activity degradation after 40,000 cyclic voltammetry (CV) cycles in 0.1 M KOH. Introducing sulfur (S) to form Mn‐S coordination changes the spin state of single Mn atom from high‐spin to low‐spin, which effectively optimizes the oxygen intermediates adsorption over the single Mn atomic sites and thus greatly improves the ORR activity.

Pt Nanoparticles Electrochemically Deposited onto Heteroatom-Doped Graphene Supports as Electrocatalysts for ORR in Acid Media

Platinum nanoparticles (PtNPs) are attached to different single heteroatom-doped (N, S, P, and B) and dual heteroatom-doped (N, B and N, P) graphene nanosheets via electrochemical deposition using the chronoamperometric method, which allowed for strong attachment of the PtNPs onto the support surface. The effect of the support material on the electrocatalytic activity of the PtNPs on the oxygen reduction reaction (ORR) in acidic media is examined. The PtNPs supported on boron-doped graphene exhibit the highest specific activity (1.26 mA cm−2), and the PtNPs supported on nitrogen and boron dual heteroatom-doped graphene exhibit the highest mass activity (0.70 A mg−1) at 0.9 V vs reversible hydrogen electrode. The kinetics of the ORR vary significantly depending on the dopants, thus concluding that the heteroatom doping of the graphene support material affects the electrocatalytic activity of PtNPs toward the ORR.

Ternary ordered L10-Pt-Co-Fe intermetallics for efficient ORR catalysis through dissociation pathway

Developing efficient and durable Pt-based electrocatalysts for oxygen reduction reaction (ORR) is critical for the practical application of fuel cells but still remains challenge at present. Here we successfully synthesized a series of ternary L10-PtCoxFe1-x (x=0.33, 0.50 and 0.67) intermetallic nanoparticles (NPs) supported on reduced graphene oxide for ORR catalysis. L10-PtCo0.50Fe0.50 exhibits the highest mass activity (MA) of 0.93 A mg−1Pt at 0.9 V (1.82 times the corresponding binary L10-PtCo intermetallics) and minimal activity loss (24.73 % loss in MA) after 30,000 potential cycles. By Density Functional Theory calculations, the excellent performance of ternary L10-PtCo0.50Fe0.50 can be ascribed to: (1) more efficient electronic structure regulation caused by dual-element driven electron transfer, which leads to more electron accumulation on Pt and weakens the over-binding of oxygen-containing species, (2) the unique two-center bridge pattern of O2 adsorption over Pt-Fe site leads to ORR proceeding via. the dissociative mechanism, avoiding the formation of OOH*.

Graphene benefits penta-nitrogen coordinated iron and catalytic stability of oxygen reduction reaction

Metal-nitrogen-carbon catalytic material, generally thought as a promising low-cost electrocatalyst of oxygen reduction reaction (ORR), surfers from long-term catalytic durability for fuel cell and metal-air battery. Here, we describe an approach of synthesizing electrochemically exfoliated graphene supported penta-nitrogen coordinated iron exhibiting encouraging ORR catalytic activity and durability. The synthesized catalyst exhibits high half-wave potentials in alkaline medium (E1/2 0.940 V) enabling high-performance zinc-air battery and in acidic condition for durable fuel cell with a high peak power density (630 mW cm−2). The current density of a proton exchange membrane fuel cell loading the catalyst as cathode tends to decay little after initial hours under H2-air measurement, remarkably inhibiting commonly decline tendency of iron–nitrogen-carbon catalysts. DFT calculation combined with extensive experimental investigations demonstrate that penta-nitrogen coordinated iron supported by graphene is thermodynamically stable, and thus benefits the catalytic stability of ORR.

Controlled Synthesis of Nickel Phosphides: Mechanistic Insights and Catalytic Activity in Hydrogen Peroxide Production

Strategically designing oxygen reduction reaction (ORR) electrocatalysts based on electronic structure is a pivotal method for enhancing the electrocatalytic activity and selectivity of two-electron (2e) reactions. While many transition metal phosphides, including NixPy, have demonstrated activity in electrocatalytic reactions, their effectiveness in 2e ORR electrocatalysis is still uncertain. In this study, guided by the theoretical insights into high electroactivity unveiled by the d-band center (Ed) theory, we engineered and synthesized Ni2P/Ni5P4 nanosheets (NSs). Functioning as 2e ORR electrocatalysts in alkaline environments, the Ni2P/Ni5P4 NSs exhibited outstanding 2e selectivity of up to 95%, with an electron transfer number close to two. Demonstrating a Faradaic efficiency exceeding 95% over a wide potential range (0.2 – 0.5 V), these NSs displayed extended stability for over 48 hours, outperforming most transition metal-based catalysts reported in literature. By employing density functional theory (DFT) calculations, the increased activity is ascribed to the adjustment of the d-band center at the engineered heterostructure interface, effectively regulating the adsorption energy of oxygen-containing intermediates (*OOH). This study offers crucial insights into the methodical design and production of effective transition metal phosphide electrocatalysts guided by the d-band center theory.

N-doped carbon confined ternary Pt2NiCo intermetallics for efficient oxygen reduction reaction

Developing high performance electrocatalysts for the cathodic oxygen reduction reaction (ORR) is essential for the widespread application of fuel cells. Herein, a promising Pt2NiCo atomic ordered ternary intermetallic compound with N-doped carbon layer coating (o-Pt2NiCo@NC) has been synthesized via a facile method and applied in acidic ORR. The confinement effect provided by the carbon layer not only inhibits the agglomeration and sintering of intermetallic nanoparticles during high temperature process but also provides adequate protection for the nanoparticles, mitigating the aggregation, detachment and poisoning of nanoparticles during the electrochemical process. As a result, the o-Pt2NiCo@NC demonstrates a mass activity (MA) and specific activity (SA) of 0.65 A/mgPt and 1.41 mA/cmPt2 in 0.1 mol/L HClO4, respectively. In addition, after 30,000 potential cycles from 0.6 V to 1.0 V, the MA of o-Pt2NiCo@NC shows much lower decrease than the disordered Pt2NiCo alloy and Pt/C. Even cycling at high potential cycles of 1.5 V for 10,000 cycles, the MA still retains ∼70%, demonstrating superior long-term durability. Furthermore, the o-Pt2NiCo@NC also exhibits strong tolerance to CO, SOx, and POx molecules in toxicity tolerance tests. The strategy in this work provides a novel insight for the development of ORR catalysts with high catalytic activity, durability and toxicity tolerance.

ZIF-8-derived carbon substrates embedded with atomically dispersed FeN2O2 active sites as bifunctional catalysts for electrochemical carbon dioxide and oxygen reduction

Transition metal assemblies on nitrogen-containing carbon substrates have promising applications as bifunctional electrocatalysts for electrochemical carbon dioxide reduction reaction (CO2RR) and oxygen reduction reaction (ORR). In this study, ZIF-8 with a rhombic dodecahedral morphology was grown from zinc nitrate and 2-methylimidazole feedstock. Then, a nitrogen-containing carbon substrate with a pore structure was formed after the release of Zn through high-temperature calcination. During the calcination process at 700°C, Fe atoms were physically adsorbed on the nitrogen-containing carbon substrate and ligated with nitrogen to form FeN2O2 reactive sites. For CO2RR, FeN2O2/NC exhibited excellent catalytic properties for converting CO2 to CO, achieving a high Faraday efficiency of 95.5% at −0.7V. Under alkaline conditions, it demonstrated ORR performance (E1/2 = 0.83V) comparable with that of Pt/C (E1/2 = 0.82V). This study not only presents an energy-efficient method for CO2RR but also provides new insights into highly active catalysts for ORR.

Porphyrin-enhanced microbial fuel cell with PCN-600 electrocatalyst for efficient oxygen reduction reaction and eco-friendly energy generation

Microbial fuel cells (MFCs) stand as a sustainable alternative for wastewater treatment and the production of clean energy. The effectiveness of this technology is intricately linked to the cathodic oxygen reduction reaction (ORR). The exceptional tunability of metal–organic frameworks (MOFs) offers a distinctive platform for customizing their inherent properties, making them promising candidates as new electrocatalysts. In this study, metalloporphyrin MOF (PCN-600) with 1D channels and micro/mesoporous structure was prepared utilizing the preassembled [Fe3O(OOCCH3)6] building blocks. Electrochemical measurements demonstrated the superior ORR performance of PCN-600 compared to bare graphite electrodes, with higher onset and half-wave potentials and enhanced electron transfer rates. PCN-600 exhibited a remarkable 52.72 % improvement in power density (179.43 mW m−2) compared to the control group (MFC-Ctrl, 88.41 mW m−2). Additionally, the chemical oxygen demand (COD) removal efficiency was enhanced, with MFC-PCN-600 achieving 82.58 % COD removal compared to 59.87 % in MFC-Ctrl. The electron-withdrawing N and M−N structure of PCN-600 guarantees an outperforming ORR catalyst toward bioelectricity generation during MFCs performance.

LaCo0.2Fe0.8O3 perovskites doped with natural Ca2+ as bifunctional electrocatalysts for oxygen evolution and reduction reactions.

Perovskite oxides are promising electrocatalysts for various energy applications due to their exceptional catalytic activity, flexible architecture, and low cost. In this study, LCFO was doped with different ratios of Ca2+ from eggshells, resulting in dual-purpose electrocatalysts for oxygen reduction and evolution processes. The nanoparticles were characterized using various techniques, including Brunauer-Emmett-Teller analysis and XRD. Results clarified the relative surface area and roughness, increasing with Ca2+ doping. LCFO also demonstrated highly magnetic properties, improved charge transfer, catalytic activity, and long-term durability. The results demonstrated the perovskite's cost-effectiveness as a bifunctional electrocatalyst, and the role of Ca2+ in enhancing its properties. La0.6Ca0.4Co0.2Fe0.8O3(LCCFO-0.4) showed higher magnetic properties (M s = 13.36 emu g-1 and M r = 2.54 emu g-1). The LCFO sample showed a current density of 5.13 mA cm-2 and 3 mA cm-2 for OER and ORR respectively, at E onset 1.7 V and 0.57 V (vs. RHE). The LCFO electrochemical active surface area is 0.033 cm2.

Factors influencing the stability of Pt-based ORR electrocatalysts in HT-PEMFCs: A theoretical investigation

Electrocatalyst stability is a key parameter for commercializing high-temperature polymer electrolyte membrane fuel cells (HT-PEMFCs). Here, we used density functional theory (DFT) to investigate the stability of Pt-based electrocatalysts by calculating the binding energy (ΔEb) of surface Pt atoms under working conditions. Our results show that Pt(111) is more stable than Pt(100) and Pt(110) under vacuum conditions. Stress hurts the stability of Pt(111), regardless of compressive or tensile stress. Most of the transition metals alloyed with Pt improve the stability of Pt(111), especially PtV, PtY, and PtTa, which increase the ΔEb by 0.60–0.70 eV (ΔΔEb). However, the stability of Pt is significantly destroyed under the working conditions of oxygen reduction reaction (ORR). The specific adsorption of ORR intermediates and electrolyte ions decreases the ΔEb of Pt(111) by 0.35–0.95 eV, and the effect of PO43-* is more significant. Furthermore, when the electric field of the electrochemical double layer is coupled with PO43-* specific adsorption, ΔΔEb further increases to 1.12 eV. Our results highlight the importance of the intrinsic ΔEb and the working conditions for the stability of Pt-based electrocatalysts. This work provides important guidelines for the design of stable ORR electrocatalysts for HT-PEMFCs.

Strain engineering of CoSA[sbnd]N[sbnd]C catalyst toward enhancing the oxygen reduction reaction activity

Developing efficient and cost-effective platinum-group metal-free (PGMF) catalysts for the oxygen reduction reaction (ORR) is crucial for energy conversion and storage devices. Among these catalysts, metal-nitrogen-carbon (MNC) materials, particularly cobalt single-atom catalysts (CoSANC), show promise as ORR electrocatalysts. However, their ORR activity is often hindered by strong hydroxyl (OH) adsorption on the Co sites. While the impact of strain engineering on MNC electrocatalysts has been minimally explored, recent studies suggest its potential to enhance catalytic performance and optimize intrinsic activity in traditional bulk catalysts. In this context, we investigate the effect of surface strain on CoSANC for ORR activity and correlate substrate-strain-induced geometric distortions with catalytic activity using experimental and theoretical methods. The findings suggest that the d-band center gap of spin states (Δεd) may be a preferred descriptor for predicting strain-dependent ORR performance in MNC catalysts. Leveraging CoSANC moiety placed on a substrate with an average size of 1.0 μm, we achieve performance comparable to that of commercial Pt/C catalysts when used as a cathode catalyst in zinc-air batteries. This investigation unveils the structure–function relationship of MNC electrocatalysts regarding strain engineering and provides valuable insights for future ORR activity design and enhancement.

Metallated graphynes as a bifunctional electrocatalyst for oxygen reduction and oxygen evolution reactions: A DFT study

Metallated graphynes as a bifunctional electrocatalyst for oxygen reduction and oxygen evolution reactions: A DFT study

Nitrogen Doped Graphene Aerogel Inserted By Carbon Black As Novel Catalyst Support for Low Temperature Hydrogen Fuel Cells

Carbon supported Pt nanocatalysts, which are commonly used in hydrogen fuel cells, suffer from Pt degradation and carbon corrosion. That causes the high cost and limited lifetime of the fuel cell1. Developing catalyst support materials with high surface area, high electrical conductivity, stability and good interaction with catalyst is an effective solution to address this issue.To enhance the activity and durability of Pt-based catalysts for hydrogen fuel cells, graphene aerogels (GA) are a prospective material with rich porous 3D-structure, large surface area, high electrical conductivity, and good electrochemical stability. They also can improve the tolerance of catalyst CO poisoning and avoid graphene stacking by integrating 2D sheet structure into 3D aerogel structure2, 3. Some research show that the nitrogen doped on the surface of carbon materials could improve ORR activity and electronic conductivity by changing the local electronic structure as well as providing a stable anchor point for pt nanoparticles to enhance the durability of catalysts4, 5.However, most GAs are made from graphene oxide (GO) produced by Hummers method which may lead to safety and environmental issue due to the usage of highly toxic and corrosive chemicals2, 5. Also, there are few articles on the application of GA in fuel cells. It may be limited by the collapse and loss of pore structure caused by compression in a fuel cell setup.In this work, graphene oxide produced by electrochemical exfoliation (EGO) was used to prepare N-doped graphene aerogel (NGA) via hydrothermal treatment with ammonia solution as nitrogen source. Moreover, NGA was mixed with carbon black (CB) as a hybrid support material that can avoid collapse of the macropore and generate a graphene-carbon network to provide large surface area for Pt nanoparticles and improve the performance of the fuel cell. Figure1 shows preliminary characterization results of NGA and performance of NGA-CB supported Pt catalysts with different content of NGA. Rich macro-mesoporous structure of NGA can be observed in the SEM image (Figure 1 (a)). Pt catalyst with 20% NGA has a maximum power density of 838 mw cm-2 which is a 31% improvement over that of Pt/CB (Figure 1 (b)).In conclusion, this study presents a fast, efficient and environmentally friendly way to synthesize nitrogen doped GA. The introduction of NGA into CB as catalyst supports can improve the electrochemical active surface area and performance of fuel cells due to graphene aerogel's high conductivity and porosity. Besides, it is effective to enhance the utilization of Pt and durability of catalysts. This will help to reduce the cost of fuel cells and facilitate their commercialization in various fields of application.Figure 1 (a) SEM images of dried NGA. (b) Performance of Pt/NGA-CB with various content of NGA compared to Pt/CB catalyst in a hydrogen fuel cell at 60 ℃ with 100% RH. References Liu, J.; Wu, X.; Yang, L.; Wang, F.; Yin, J., Unprotected Pt nanoclusters anchored on ordered mesoporous carbon as an efficient and stable catalyst for oxygen reduction reaction. Electrochimica Acta 2019, 297, 539-544.Sarac Oztuna, F. E.; Barim, S. B.; Bozbag, S. E.; Yu, H.; Aindow, M.; Unal, U.; Erkey, C., Graphene Aerogel Supported Pt Electrocatalysts for Oxygen Reduction Reaction by Supercritical Deposition. Electrochimica Acta 2017, 250, 174-184.Wu, Z.-S.; Yang, S.; Sun, Y.; Parvez, K.; Feng, X.; Müllen, K., 3D Nitrogen-Doped Graphene Aerogel-Supported Fe3O4 Nanoparticles as Efficient Electrocatalysts for the Oxygen Reduction Reaction. Journal of the American Chemical Society 2012, 134 (22), 9082-9085.Li, O. L.; Chiba, S.; Wada, Y.; Panomsuwan, G.; Ishizaki, T., Synthesis of graphitic-N and amino-N in nitrogen-doped carbon via a solution plasma process and exploration of their synergic effect for advanced oxygen reduction reaction. Journal of Materials Chemistry A 2017, 5 (5), 2073-2082.Xie, B.; Zhang, Y.; Zhang, R., Coassembly and high ORR performance of monodisperse Pt nanocrystals with a mesopore-rich nitrogen-doped graphene aerogel. Journal of Materials Chemistry A 2017, 5 (33), 17544-17548 Figure 1

Comparison of Cobalt-Based Vs. Cobalt-Free Infiltrated Nano-Catalyst Cathodes for Low Temperature Solid Oxide Cells

Tailoring inexpensive cathode materials which demonstrate high catalytic activity at lower temperature is crucial for the deployment of solid oxide cells as a next generation premier clean energy source.1 Cobalt is a crucial component and widely used in the most state-of-the-art cathodes of many types of batteries, fuel cells, and electrolysis cells.2 However, due to supply chain issues, replacement of cobalt (which is the most frequently used electrocatalyst to facilitate the oxygen reduction reaction) with other transition metals that are far more available, cheaper, and have less geopolitical, environmental, and social concerns have been explored in this work.In order to overcome the lethargic oxygen reduction reaction (ORR) kinetics, various transition metal oxide electrocatalysts (Ni, Fe, and Zn) and Co (for baseline comparison) were infiltrated on porous scaffold backbone support along with SrO and PrOx. This scalable spray coated porous scaffold of mixed ionic electronic conductor (MIEC) Gd0.1Ce0.9O2- δ (GDC) electrolyte material increases triple phase boundary for ORR reaction. SEM images shown in Figure 1(a) and 1(b) confirms nano-catalyst formation inside scaffold pores.At first, multiphase Co oxide-based nano-catalysts were tested on symmetric cells for baseline data, which demonstrated an area specific resistance (ASR) of 0.08 Ωcm2 at 650°C. Ni, Fe and Zn oxides were investigated as potential replacement electrocatalysts for CoOx because they exhibited similarly low ASR on symmetric cells in the range of 0.08 to 0.16 Ωcm2 at 650°C. To further assess their ability to perform as electrocatalysts for ORR, solutions of these transition metal nitrates were infiltrated, and heat treated to form oxides into SOFC cathode scaffolds and their performance in solid oxide fuel cell operating conditions was characterized. At optimal infiltration loading, Fe and Zn exhibited peak power density of 1.0 W/cm2 and 0.5 W/cm2 with polarization ASR of ~0.03 Ωcm2 and ~0.06 Ωcm2 respectively at 650°C as shown in Figure 1(c). Fe and Zn are considered relatively non-toxic, and are very cheap, however, further optimization will be required for enhanced performance.Conversely, Ni and Co as infiltrated nano-catalyst cathodes both showed extremely low polarization ASR of ~0.01 Ωcm2 with peak power density of 1.7 and 1.9 W/cm2 respectively at 650°C, as shown in Figure 1(c). Cobalt-free Ni based cathode demonstrated remarkably high peak power density of 1 W/cm2 and 1.5 W/cm2 at 550°C and 600°C respectively. Further exploration of cobalt-free, electrocatalytically active materials may open doors to new opportunities for systems like regenerative fuel cells that can operate both as a fuel cell and electrolysis cell with integrated system for energy conversion, and storage.3 Wachsman, E. D., & Lee, K. T. (2011). Lowering the temperature of solid oxide fuel cells. Science, 334(6058), 935– https://doi.org/10.1126/science.1204090.Olivetti, E., Ceder, G., Gaustad, G., & Fu, X. (2017). Lithium-Ion battery supply chain considerations: Analysis of potential bottlenecks in critical metals. Joule, 1(2), 229–243. https://doi.org/10.1016/j.joule.2017.08.019.Thangarasu, S., Dhanabalan, K., Roh, S., Kim, S. W., Park, K., Jung, S., Kurkuri, M. D., & Jung, H. (2017). A comprehensive review on unitized regenerative fuel cells: Crucial challenges and developments. International Journal of Hydrogen Energy, 42(7), 4415–4433. https://doi.org/10.1016/j.ijhydene.2016.10.140. Figure 1

(Invited) Efficient Ternary Nicuw Hydrogen Oxidation Catalysts for Anion Exchange Membrane Fuel Cells

Anion exchange membrane fuel cells (AEMFCs) offer prospective approaches to replace proton exchange membrane fuel cells via cost-effective catalysts and membranes. While significant progress has been made in efficient nonnoble electrocatalysts for oxygen reduction reaction in alkaline media, the hydrogen oxidation reaction (HOR) in the alkaline condition still relies on high platinum loadings to compensate for its sluggish kinetics. Therefore, developing efficient non-noble metal electrocatalysts with Pt-like HOR performances in alkaline electrolytes is highly desired but a great challenge.The hydrogen binding energy (HBE) has been identified as the primary descriptor for the HOR. Additionally, an unfavorable hydroxide binding energy (OHBE) is considered the rate-determining step in the Volmer reaction to generate water. Therefore, an ideal catalyst for HOR should achieve a balance between HBE and OHBE. However, despite being a promising non-noble metal, nickel exhibits excessively high HBE and lacks active sites for hydroxide adsorption, which hinders its further application in the real fuel cell.In this work, NiW was successfully deposited onto Cu to form a ternary Ni-Cu-W alloy catalyst by a chemical reduction method. Through XPS spectra, we found the charge transfer from Ni to W to give Ni a higher valence state, contributing to a weakened hydrogen binding energy. Electrochemical measurements observed Ni-Cu-W exhibit an kinetic activity with 117.9 mA/mgNi at η= 50 mV, which is the highest among the reported platinum group metal-free catalysts. Ni-Cu-W alloy showcased robust stability, with no activity degradation during an accelerated long-term durability test between a low overpotential (-0.1 ~ 0.1 V, vs RHE) with 10,000 cyclic voltammetry scans and only a 5.7% activity loss at η= 50 mV when applying more larger overpotential (-0.1 ~ 0.2 V) with the same cycles. When assembled with this catalyst as anode and Pt/C as cathode, it delivered a peak power density of 289 mW/cm2. Both experimental and theoretical studies were conducted to gain insights into the catalyst's enhanced performance. Our findings revealed that the incorporation of Cu into the catalyst significantly weakened the adsorption of hydrogen species, while simultaneously lowering the energy barrier required for the absorption of hydroxide ions. These key observations might shed light on the underlying mechanisms responsible for the catalyst's improved activity and stability.

Accelerating the Discovery of Oxygen Reduction Electrocatalysts: High‐Throughput Screening of Element Combinations in Pt‐Based High‐Entropy Alloys

AbstractThe vast number of element combinations and the explosive growth of composition space pose significant challenges to the development of high‐entropy alloys (HEAs). Here, we propose a procedural research method aimed at accelerating the discovery of efficient electrocatalysts for oxygen reduction reaction (ORR) based on Pt‐based quinary HEAs. The method begins with an element library provided by a large language model (LLM), combined with microscale precursor printing and pulse high‐temperature synthesis techniques to prepare multi‐element combination HEA array in one step. Through high‐throughput measurement using scanning electrochemical cell microscopy (SECCM), precise identification of highly active HEA element combinations and exploration of composition space for a specific combination are achieved. Advantageous element combinations are further validated in practical electrocatalytic evaluations. The contributions of individual element sites and the synergistic effects among elements of such HEAs in enhancing reaction activity are elucidated via density functional theory (DFT) calculations. This method integrates high‐throughput experiments, practical catalyst validation, and DFT calculations, providing a new pathway for accelerating the discovery of efficient multi‐element materials in the field of energy catalysis.

Investigation of the Chemical Changes from N-Doped Graphene and MOF to N-G/MOF Composites for the Enhancement of Electrocatalytic Properties

N-doped graphene (N-G) materials showed high potential as electrocatalysts for oxygen reduction reaction (ORR) in electrochemical energy systems and increasingly gaining ground as alternatives to the expensive and degradation-prone Platinum Group Metal (PGM)-based electrocatalysts. Numerous studies demonstrated that as N-G materials are integrated with Metal-Organic Frameworks (MOFs), the N-G/MOF composites exhibited higher electrocatalytic activities than the individual precursors; on several occasions, even higher than the PGM-based ones. In this essence, it is crucial to analyze and understand the chemical changes that occur through the integration of N-G and MOF, as these changes play key roles in enhancing electrocatalytic properties of the materials by introducing different electrochemically active sites. To investigate such chemical changes, we have synthesized an N-G/MOF composite by integrating an N-G with ZIF-8 (which is the most studied member of the MOF family) following a facile mechanochemical wet ball milling process. In the electrochemical characterization, the N-G/MOF composite performed better than N-G and ZIF-8 for ORR catalysis by generating a higher cathodic current density.Multiple samples of N-G, ZIF-8, and N-G/MOF composite were analyzed by X-ray photoelectron spectroscopy (XPS), and Fourier transform infrared (FTIR) spectroscopy to detect the changes in elemental ratios, chemical bonds, and chemical functional groups from the precursors (N-G and ZIF-8) to the N-G/MOF composite. An increase in the elemental Nitrogen (N) ratio was observed in N-G/MOF compared to its precursors; which signifies an increased N-doping ratio in the material which is advantageous for ORR catalysis. The XPS C 1s spectra of N-G/MOF shifted to a higher binding energy (~1eV) compared to the precursors indicating an overall increase in the oxidation states of Carbon (C) atoms in the material which could facilitate oxygen molecules’ adsorption better on these sites at the beginning of ORR process. Comparing the analyzed XPS N 1s spectra revealed an increased relative ratio of the Pyridinic-N functional group in N-G/MOF, which also partly justifies the composite’s enhanced ORR electrocatalytic performance. FTIR analysis revealed interactions between methyl groups (-CH3) of ZIF-8 with oxygen functional groups (i.e. -OH) of N-G while forming the N-G/MOF composite. Besides, a transition from methyl groups (-CH3) to methylene group ( >CH2) was evident during the synthesis, increasing charge density near those C atoms of the N-G/MOF which can as well be advantageous for ORR electrocatalysis. The combined impact of these chemical alterations from N-G and ZIF-8 to N-G/MOF yielded a synergistic effect, elucidating its superior electrocatalytic properties. The findings of this experimental investigation provide insights into the chemical reasons for the enhancement of electrocatalytic properties of N-G/MOF composites; and hereby offer guidance to the design and optimization endeavors of novel catalysts with N-G and MOF materials for diverse electrochemical applications.