Electrical Stability Research Articles

Catalyst‐Support Interactions in Zr2ON2‐Supported IrOx Electrocatalysts to Break the Trade‐Off Relationship Between the Activity and Stability in the Acidic Oxygen Evolution Reaction

AbstractThe development of highly active and durable Ir‐based electrocatalysts for the acidic oxygen evolution reaction (OER) is challenging because of the corrosive anodic conditions. Herein, IrOx/Zr2ON2 electrocatalyst is demonstrated, employing Zr2ON2 as a support material, to overcome the trade‐off between the activity and stability in the OER. Zr2ON2 is selected due to its excellent electrical conductivity and chemical stability, and the fact that it induces strong interactions with IrOx catalysts. As a result, IrOx/Zr2ON2 electrocatalysts exhibit outstanding OER performances, reaching an overpotential of 255 mV at 10 mA cm−2 and a mass activity of 849 mA mgIr−1 at 1.55 V (vs the reversible hydrogen electrode). The activity of IrOx/Zr2ON2 is maintained at 10 mA cm−2 for 5 h, while in contrast, IrOx/ZrN and an unsupported IrOx catalyst undergo drastic degradation. Combined experimental X‐ray analyses and theoretical interpretations reveal that the reduced oxidation state of Ir and the extended IrO bond distance in IrOx/Zr2ON2 effectively increase the activity and stability of IrOx by altering reaction pathway from a conventional adsorbate evolution mechanism to a lattice oxygen‐participating mechanism. These results demonstrate that it is possible to effectively reduce the Ir content in OER catalysts through interface engineering without sacrificing the catalytic performance.

Autonomic regulation therapy in chronic heart failure with preserved/mildly reduced ejection fraction: ANTHEM-HFpEF study results

BackgroundAutonomic regulation therapy (ART) utilizing cervical vagus nerve stimulation (VNS) appeared to be safe and to improve autonomic tone, symptoms, and cardiac mechanical function in patients with symptomatic heart failure and reduced ejection fraction in the ANTHEM-HF Study. The ANTHEM-HFpEF Study is the first investigation to evaluate the safety and feasibility of ART in patients with symptomatic heart failure and preserved or mildly reduced ejection fraction (HFpEF, HFmrEF). MethodsThis open-label interventional study enrolled 52 patients with HFpEF or HFmrEF, NYHA Class II-III, and LVEF ≥40%, who received stable guideline-directed medical therapy. All patients were successfully implanted with LivaNova VNS Therapy® system with an electrical lead surrounding the right cervical vagus nerve. ResultsAdverse event incidence was low. At 12 months, NYHA class (p <0.0001), 6-min walk distance (p <0.05), and quality of life (p <0.0001) were improved. Cardiac mechanical function measures were normal at baseline, except for left ventricular mass index in women and E/e' ratio in all patients, which were elevated at baseline, and were unchanged by ART. Autonomic tone and reflexes improved, indicated by 29% decrease in low-frequency/high-frequency heart rate variability to normal levels (p = 0.028) and by increased heart rate turbulence slope (p = 0.047). T-wave alternans (p = 0.001) and T-wave heterogeneity (p = 0.001) were reduced from abnormal to normal ranges. Nonsustained ventricular tachycardia incidence decreased (p = 0.027). ConclusionsART appeared well-tolerated and safe in patients with HFpEF or HFmrEF. Chronic ART did not alter mechanical function measures but was associated with improved heart failure symptoms, exercise tolerance, autonomic tone, and cardiac electrical stability. Clinical trial registryAutonomic Neural Regulation Therapy to Enhance Myocardial Function in Heart Failure with Preserved Ejection Fraction [ClinicalTrials.gov #NCT03163030, registered 05/22/2017].

Accelerated degradation of sealant/interconnect joint in solid oxide cell stacks

The electrical and microstructural stability of a model glass sealant sandwiched between two SS430 interconnects was investigated in terms of designed acceleration stress (AST) tests for 500 h in the air. Under applying different stressors, including DC voltage (0–35 V), inverse voltage cycles (3 and 4 cycles), and temperature (700–800 °C), morphological changes of anodically/cathodically polarized interfaces were studied. With 0.7 V and 750 °C, the specimen showed a stable electrical resistivity with well-bonded interfaces. Under higher voltages, a resistivity decay was observed with accelerated interfacial corrosion and delamination at the anode and roughening and losing contacts due to Si accumulation at the cathode side. With cyclic polarization, lower degradation in resistivity and less interfacial deterioration were observed. Aging at higher temperature was accompanied by a slight decrement in the resistivity.

Design of a Four-Atom Cluster Embedded in Carbon Nitride for Electrocatalytic Generation of Multi-Carbon Products.

The development of efficient and stable catalysts for the electrocatalytic CO2 and CO reduction reactions (CORR) is under active investigation, but the problems of poor selectivity and low efficiency for C2 products still exist. We design a two-dimensional carbon nitride material (C5N2H2) that contains an eight N-atom structure capable of coordinating four-metal atom clusters and supporting simultaneously two carbon oxide molecules needed for the C2 coupling. The designed material has excellent electrical conductivity and stability. After high-throughput screening of catalytic performance of multiple four-metal clusters embedded into the framework, we systematically investigate the CORR process of 11 candidates. We find that Cu4-C5N2H2 has superior selectivity and low limiting potential for generating ethylene, while Cu2Zn2-C5N2H2 is selective and efficient to synthesize ethanol. Further, we discover a novel type of descriptor related to 2D material flexibility to evaluate the potential-determining step for generating ethylene. Our report both broadens the possibilities for few-atom CO reduction and demonstrates a novel substrate flexibility-related descriptor to predict the catalytic performance of materials.

Refining Used Lubricant Oils with Different Concentration Levels of Sulfuric Acid and Nonylphenol

The purpose of this research was to evaluate the refining of used lubricating oils (ULOs), and their possible use as drilling fluids. 17 treatments were evaluated and sulfuric acid and nonylphenol were used as reagents at concentrations of 0.12, 0.24 and 0.36 g/mL and temperatures of 40, 60, 80 and 100 °C. AT80 and AT100 ULOs treated at 80 and 100 °C without reagents, presented an average density of 0.84 g/cm-3, a viscosity of 76.3 and 75.3 cP, an electrical stability of 1,731.3 and 1,394.6 V and a flash point of 183 and 190 °C as higher. The ST40C1 and ST40C2 treatments, added with reagents, showed similar results to AT80 and AT100 in the evaluated variables, but they are more expensive treatments. According to the results, it is concluded that the refined ULO can be a substitute for the oil used in the formulation of oil-based drilling fluids.

Highly self-adhesive, compressible, stretchable, all hydrogel-based supercapacitor for wearable/portable electronics

The increasing popularity of portable/wearable multifunctional electronic devices has highlighted the need for multifunctional power-supply devices. To fulfill this need, we firstly designed a highly self-adhesive and deformable polyacrylamide-based hydrogel electrode. Inspiration by mussels, nanofillers with the design of confined nanospace that formed by the composite of polydopamine-reduced graphene oxide and a compound of cobalt-nickel bimetal oxide and cobalt nitride was involved in the as-prepared hydrogel electrode. This design endows the as-prepared electrode with both the impressive self-adhesive property as well as electrochemical performance. Secondly, a multifunctional all hydrogel-based supercapacitor was assembled by the same as-prepared polyacrylamide hydrogel matrix of electrodes and an electrolyte. The self-adhesive property of both electrode and electrolyte provides a tightly connected interface to ensure structural stability and results in a highly electrical stability during different deformations. Moreover, this multifunctional all hydrogel-based supercapacitor can adhere to the tissue and be used as a functional electronic component as both energy storage and power-supply device. This designed multifunctional supercapacitors can provide insights for further strategies to address energy storage alternatives for portable/wearable electronics.

Investigation of Silver Nanowire Transparent Heated Films Possessing the Application Scenarios for Electrothermal Ceramics

As transparent heated films (THFs) based on transparent conductive oxides (TCOs) are restricted by expensive raw materials and inappropriate fabricating film on curved surfaces because of its brittleness, silver nanowires transparent conductive film (AgWS-TCF) is an ideal alternative material for THF. However, there are still many problems to be solved in the electrical and thermal stability of AgNWs-TCF. In this paper, an Al-doped ZnO (AZO) nanoparticles produced by magnetron sputtering was used to modify and coat the AgNWs network, and the ceramic /AgNWs@AZO-TCF was obtained. Compared with ceramic/AgNWs-TCF, the sheet resistance of ceramic/AgNWs@AZO-TCF decreased from 53.2 to 19.3 Ω/sq, resistance non-uniformity decreased from 18.0% to 7.0%, and the inoxidizability, current-impact resistance, and failure voltage increased significantly. In addition, the electrothermal efficiency of ceramic/AgNWs@AZO-TCF is significantly improved after sputtering a SiO2 layer on the surface of ceramic substrate. Compared with ceramic/AgNWs@AZO-TCF, the temperature of ceramic-SiO2/AgNWs@AZO-TCF increases from 78.7 to 113.2 °C under applied voltage of 6 V, which possess the application scenarios for electrothermal-ceramics teacup (or tableware) to realize the function of heat preservation and disinfection.

Impact of Tourist Areas on the Electrical Grid: A Case Study of the Southern Dominican Republic

The growing integration of tourist areas and complexes increases the demand for electrical power systems. This increased demand may represent a vulnerability to voltage and frequency stability in electrical grids, where these parameters are essential for an optimal and continuous supply of electrical energy. The Dominican Republic has begun a tourist expansion process in areas that were previously not commercially exploited. Based on the factors mentioned above, this article’s objective was to analyze the impact caused by the increase in electricity demand due to the tourism sector, using the Enriquillo Region of the Dominican Republic as a case study. The impacts of this expansion on the voltage profiles and the system’s frequency were determined. The methodology consisted of obtaining information on the mathematical model of the system to evaluate the expansion plan for the study period and the projection of the demand of the grid. The complete system was modeled with this information, including expansion and possible renewable generators. Finally, the flow of charges was measured, and dynamic analysis was carried out. The quasi-dynamic and RMS/EMT simulations were carried out in the DIgSILENT software for this investigation. The results showed that the electrical system benefits stability and national standards. This is because the transmission lines reduced their loading by approximately 2.99% in 2032. As the years of study passed and the system load increased, the voltage in the bars of the 138 kV systems and generators did not exceed the range of ±5% established in the technical regulations of the Dominican electricity market.

Coating of Leather with Dye-Containing Antibacterial and Conducting Polypyrrole

In the search for functional organic biomaterials, leather constituted by collagen fibers was coated with a conducting polymer, polypyrrole. The coating was carried out during the oxidation of pyrrole in an aqueous solution of poly(N-vinylpyrrolidone) in the presence of five organic dyes: crystal violet, neutral red, methyl orange, acriflavine, and methylene blue. This technique ensures the uniform coating of collagen fibers with polypyrrole and incorporation of organic dyes. The surface morphology was observed with scanning electron microscopy and the transverse profile, reflecting the penetration of the conducting phase into the leather body with optical microscopy. While the polypyrrole coating endows leather with electrical conductivity, organic dyes are expected to affect the polymer morphology and to provide an antibacterial effect. The lowest sheet resistance and antibacterial activity were obtained with crystal violet. This type of coating was characterized in more detail. Infrared spectroscopy confirmed the coating of collagen fibers with polypyrrole and dye incorporation. Mechanical properties were extended to the cyclic bending of the leather at various angles over 5000 cycles. The relative resistance changes were a few percent, indicating good electrical stability during repeated mechanical stress.

Improving OFF-State Bias-Stress Stability in High-Mobility Conjugated Polymer Transistors with an Antisolvent Treatment.

Conjugated polymer field-effect transistors are emerging as an enabling technology for flexible electronics due to their excellent mechanical properties combined with sufficiently high charge-carrier mobilities and compatibility with large-area, low-temperature processing. However, their electrical stability remains a concern. ON-state (accumulation mode) bias-stress instabilities in organic semiconductors have been widely studied, and multiple mitigation strategies have been suggested. In contrast, OFF-state (depletion mode) bias-stress instabilities remain poorly understood despite being crucial for many applications in which the transistors are held in their OFF-state for most of the time. Here, a simple method of using an antisolvent treatment is presented to achieve significant improvements in OFF-state bias-stress and environmental stability as well as general device performance for one of the best performing polymers, solution-processable indacenodithiophene-co-benzothiadiazole (IDT-BT). IDT-BT is weakly crystalline, and the notable improvements to an antisolvent-induced, increased degree of crystallinity, resulting in a lower probability of electron trapping and the removal of charge traps is attributed. The work highlights the importance of the microstructure in weakly crystalline polymer films and offers a simple processing strategy for achieving the reliability required for applications in flexible electronics.

Effect of temperature and improving the optoelectrical attributes of copper gallium sulfide (CuGaS2) thin films

ABSTRACT This work is focused on the optimization and characterization of copper gallium sulfide (CuGaS2) thin film prepared via the spray pyrolysis route. Chalcogenides are compounds having a chalcogen anion and an electropositive element, and these thin films have more absorption coefficients. The structural, optical, electrical, and morphological properties of CuGaS2 thin films are studied using X-ray diffraction (XRD), Scanning electron microscopy (SEM), UV-Vis-NIR Spectroscopy, and Hall effect techniques. The above characteristics are studied for both as prepared and annealed Copper Gallium Sulfide (CGS) thin films. These films have a chalcopyrite tetragonal crystal structure. It is a promising material for solar cell applications due to its suitable bandgap and good electrical stability. The results of this study provide a framework for fabricating an optimized CGS absorber layer in photovoltaic solar cells.

Ball-Mill-Inspired Durable Triboelectric Nanogenerator for Wind Energy Collecting and Speed Monitoring.

Triboelectric nanogenerators have attracted extensive attention in energy harvesting due to its light weight, low cost, high flexibility, and diversity of function. However, deterioration in terms of mechanical durability and electrical stability of the triboelectric interface during operation, which are the results of material abrasion, severely limits their practical applications. In this paper, a durable triboelectric nanogenerator inspired by a ball mill was designed by using metal balls in hollow drums as carriers for charge generation and transfer. Composite nanofibers were deposited onto the balls, increasing the triboelectrification with the interdigital electrodes in the inner surface of the drum for higher output and electrostatic repulsion to each other for lower wear. Such a rolling design cannot only increase mechanical durability and maintenance convenience, where the filler can be easily replaced and recycled but also collect wind power with the decreased wearing of materials and sound efficiency in comparison with the typical rotation TENG. In addition, the short circuit current shows a strong linear relationship with the rotation speed in a wide range, which can be used to detect wind speed, thus showing potential applications in distributed energy conversion and self-powered environmental monitoring systems.

Improvement of electrical characteristics of flexible AZO/Ag/Cu/AZO transparent conductive films by Cu deposition

Flexible electrodes are prepared by deposition on polyethylene naphthalate substrates, which melt at elevated temperatures, and are, therefore, generally unsuitable for deposition at high temperatures. However, only limited improvement in the conductivity can be achieved for Al-doped ZnO (AZO) films formed at low temperatures. Multilayer transparent conductive films (AZO/Ag/AZO), in which a conductive metal such as Ag is sandwiched between AZO, exhibit superior resistivity and electrical stability against bending compared to AZO films and have attracted considerable attention. In this study, AZO transparent conducting films were investigated as alternatives to indium tin oxide. The electrical characteristics of AZO/Ag/AZO films are not optimal at low temperatures owing to oxidation of Ag and its diffusion into the AZO layer. We, therefore, developed transparent conductive films with an AZO/Ag/Cu/AZO structure in which an intermediate Cu layer suppresses the oxidation of Ag and inhibits its diffusion into the substrate-side AZO layer, changing the deposition conditions of Cu. The optimal characteristics were obtained at a Cu deposition rate of 0.08 nm/s. A further increase in Cu layer thickness suppresses the oxidation of the Ag layer and its diffusion into the substrate-side AZO layer, thereby improving resistivity. Notably, a 5 nm thick Cu layer exhibited exclusive Cu regions, which further prevented the oxidation of Ag and its diffusion into the substrate side of the AZO layer, with a resistivity of 5.12 × 10−5 Ω cm. This resistivity is comparable to that of existing transparent conducting films used in practical applications; however, the transmittance of the AZO/Ag/Cu/AZO film was reduced owing to the low transparency of Cu.

Oxide TFTs with S/D-contacts patterned by high-resolution reverse-offset printed resist layers

Besides the metal oxide thin film transistors (TFTs) in flat-panel displays that are fabricated using vacuum-processes, there is a growing interest in the fabrication of metal oxide TFTs by means of scalable, low-cost solution and printing processes for applications such as flexible displays and biosensors. Although devices with printed semiconductor and gate insulator can exhibit good electrical performance, source/drain-contacts (S/D) printed from silver (Ag) nanoparticles (NPs) typically suffer from deteriorated electrical characteristics and stability problems. On the other hand, metals providing good contacts, such as aluminum (Al), titanium (Ti) and molybdenum (Mo), cannot be formed as air-stable NPs. To overcome these issues, we have developed a patterning method based on high-resolution reverse-offset printing (ROP) of a sacrificial polymer resist layer. ROP delivers patterns with micrometer-level resolution and steep sidewalls, which are ideal for patterning vacuum-deposited metal contacts at high resolution via lift-off process. Solution-processed indium oxide (In2O3) TFTs were successfully fabricated by using ROP lift-off process for patterning of gate and S/D-electrodes using Al. The fabricated In2O3-based TFTs with Al S/D-contacts exhibit good uniformity, constant mobility (μ sat) ∼ 2 cm2 (V s)−1 over a wide range of width/length-ratios (W/L) and almost zero turn-on voltage (V on) ∼ −0.2 V. TFTs down to 5 µm channel lengths were successfully patterned. Further development of the fabrication process could lead to flexible fully-print-patterned high-resolution TFT backplanes for flexible displays, biosensors, photosensors and x-ray detectors.

Lantern‐Inspired On‐Skin Helical Interconnects for Epidermal Electronic Sensors

AbstractEpidermal electronics have been attracting considerable attention due to their various potential applications in human‐computer interaction and health monitoring. However, because of the lack of a self‐adhesive and stable interconnect method between epidermal electronic sensors and rigid circuit boards, there remain difficulties in detecting body signals accurately by epidermal electronic sensors in daily life. Here, a 3D helical on‐skin interconnect is first introduced for epidermal electronics sensors. Inspired by the structure of the accordion lantern, the interconnect is composed of two electrospinning polyurethane (PU) fiber films and a helical metal fiber. The helical metal fiber acts as a stable conductor with stretchability, and the PU fiber film with polydimethylsiloxane provides a self‐adhesive substrate. Mechanical simulations and tests prove that the proposed interconnect can laminate conformally and unobtrusively onto human skin with excellent electrical stability (less than 0.5% electrical resistance change upon 100% elongation). Furthermore, based on the proposed interconnect, an all‐in‐one sensor‐interconnect design is presented, which endows the epidermal electronic systems with anti‐motion interference capability. A gesture identification wristband system realized by a single all‐in‐one strain sensor is demonstrated. Besides, a wireless on‐skin system that accurately monitors dynamic 12‐lead electrocardiographic is successfully built using all‐in‐one electrodes.

An innovative process to improve the end-contacts of metallic polypropylene capacitors by arc spray and PVD

Metallized polypropylene (MPP) capacitors are electronic devices that store energy, and are generally used in electric motors. The MPP capacitor is integrated of two MPP foils that must be connected each one at the edge using a conductive layer to assure connections with an external circuit, where a single layer of zinc by Arc-spray technique is generally used. The zinc layer is known as ‘schooping’, End-spray, contact layer or End-contact, this coating has a thickness of 400-500 μm.In order to extend the life time of capacitors this work proposes the use of two layers for End-contacts metallization, the first one deposited by PVD and a second layer by arc spray, the objective is to improve the mechanical stability and increase the electrical contact area between MPP edge and Zn by Arc Spray. Electrical conductivity, chemical stability, thickness, morphology, and conditions of the vacuum chamber were analyzed, where Al and Zn were chosen and deposited by PVD. The behavior and performance of the capacitor was analyzed by impedance measurements, therefore the adherence was tested using 1,000 pulses at a peak current of 250 x Irms rating. The capacitors with an intermediate layer of Al or Zn by PVD showed less deformation and better electrical behavior compared to conventional single layer capacitors.

Exceeding Theoretical Capacity in Exfoliated Ultrathin Manganese Ferrite Nanosheets via Galvanic Replacement‐Derived Self‐Hybridization for Fast Rechargeable Lithium‐Ion Batteries

AbstractMixed transition metal oxides are promising anodes to meet high‐performance energy storage materials; however, their widespread uses are restrained owing to limited theoretical capacity, restricted synthesis methods and templates, low conductivity, and extreme volume expansion. Here, Mn3‐xFexO4 nanosheets with interconnected conductive networks are synthesized via a novel self‐hybridization approach of a facile, galvanic replacement‐derived, tetraethyl orthosilicate‐assisted hydrothermal process. An exceptionally high reversible capacity of 1492.9 mAh g−1 at 0.1 A g−1 is achieved by producing Li‐rich phase through combined synergistic effects of amorphous phases with interface modification design for fully utilizing highly spin‐polarized surface capacitance. Furthermore, it is demonstrated that large surface area can effectively facilitate Li‐ion kinetics, and the formation of interconnected conductive networks improves the electrical conductivity and structural stability by alleviating volume expansion. This leads to a high rate capability of 412.3 mAh g−1 even at an extremely high current density of 10 A g−1 and stable cyclic stability with a capacity up to 921.9 mAh g−1 at 2 A g−1 after 500 cycles. This study can help to overcome theoretically limited electrochemical properties of conventional metal oxide materials, providing a new insight into the rational design with surface alteration to boost Li‐ion storage capacity.

Structural, physical, wear and anticorrosive properties of electroactive polyamide/Ti3C2Tx MXene nanocomposite

The 2D few-layered Ti3C2Tx MXene nanosheets have been prepared by etching and delamination of aluminium layers from the Ti3AlC2 MAX phase. The electroactive polyamide (EPA)/Ti3C2Tx MXene nanocomposites (NCs) containing (0.6, 1.2 and 1.8 wt%) MXene were prepared via in-situ oxidative coupling polymerization. The structural properties of NCs indicated close interaction between EPA and MXene resulting in improvement in physical properties such as electrical conductivity, thermal stability and adhesion strength. The surface roughness and water contact angle were not affected by the addition of Ti3C2Tx MXene in the EPA matrix. The tribological properties were improved for NCs coated samples. The corrosion study revealed the excellent corrosion protection ability of EPA/Ti3C2Tx MXene NCs containing 1.2 wt% MXene.

Investigation of Poly(MM-EM-BM) as Nanosealing Materials in Oil-Based Drilling Fluids: Synthesis and Evaluation.

Nanosealing technology has become the key to overcoming the wellbore instability problem in deep and ultradeep shale formations. In this Article, the terpolymer poly(MM-EM-BM) was synthesized from methyl methacrylate, ethyl methacrylate, and butyl methacrylate by a Michael addition reaction. The poly(MM-EM-BM) nanoparticles were investigated by Fourier transform infrared spectroscopy, laser scattering analysis, and thermogravimetric analysis. The results imply that the particle size range of poly(MM-EM-BM) is between 33.90 and 135.62 nm and the average diameter is about 85.95 nm at room temperature, which can maintain excellent stability at 382.75 °C. The effects of poly(MM-EM-BM) on the properties of oil-based drilling fluids (OBDFs) were ascertained through experiments on the rheological performance, electrical stability, and high-temperature and high-pressure (HTHP) filtration loss. The results suggested that when the amount of added poly(MM-EM-BM) increases, the apparent viscosity, plastic viscosity, dynamic shear force, and demulsification voltage of the drilling fluids will increase correspondingly; in contrast, the HTHP filtration loss gradually decreased. When poly(MM-EM-BM) is added at 0.75%, the kinetic-to-plastic ratio of the drilling fluids is 0.24 and the filtration loss is 0.6 mL, showing excellent overall performance. The drilling fluids have a good rock-carrying ability and water loss wall-building property. The sealing performance and mechanism of poly(MM-EM-BM) were researched by the method of a sealing performance test under high temperature. The results indicated that the more poly(MM-EM-BM) used, the higher the sealing efficiency of the mud cake and the core as the sealing medium. When poly(MM-EM-BM) was added at 0.75%, the sealing rates of the mud cake and the core as the sealing medium reached the maximum sealing rates of 40.30% and 91.48%, respectively. When poly(MM-EM-BM) enters the core nanopore joint for a certain distance under formation pressure, a tight sealing layer will be formed to effectively prevent the entry of filtrate. Poly(MM-EM-BM) as a potential oil-based nanosealing agent is expected to solve the problem caused by wellbore instability in shale horizontal wells.

Silica-Fiber-Reinforced Composites for Microelectronic Applications: Effects of Curing Routes

For curing of fiber-reinforced epoxy composites, an alternative to thermal heating is the use of microwave energy, which cures quickly and consumes less energy. Employing thermal curing (TC) and microwave (MC) curing methods, we present a comparative study on the functional characteristics of fiber-reinforced composite for microelectronics. The composite prepregs, prepared from commercial silica fiber fabric/epoxy resin, were separately cured via thermal and microwave energy under curing conditions (temperature/time). The dielectric, structural, morphological, thermal, and mechanical properties of composite materials were investigated. Microwave cured composite showed a 1% lower dielectric constant, 21.5% lower dielectric loss factor, and 2.6% lower weight loss, than thermally cured one. Furthermore, the dynamic mechanical analysis (DMA) revealed a 20% increase in the storage and loss modulus along with a 15.5% increase in the glass transition temperature (Tg) of microwave-cured compared to thermally cured composite. The fourier transformation infrared spectroscopy (FTIR) showed similar spectra of both the composites; however, the microwave-cured composite exhibited higher tensile (15.4%), and compression strength (4.3%) than the thermally cured composite. These results illustrate that microwave-cured silica-fiber-reinforced composite exhibit superior electrical performance, thermal stability, and mechanical properties compared to thermally cured silica fiber/epoxy composite in a shorter time and the expense of less energy.