Electrical Resistivity Measurements Research Articles

Real-space visualization of a defect-mediated charge density wave transition

We study the coupled charge density wave (CDW) and insulator-to-metal transitions in the 2D quantum material 1T-TaS2. By applying in situ cryogenic 4D scanning transmission electron microscopy with in situ electrical resistance measurements, we directly visualize the CDW transition and establish that the transition is mediated by basal dislocations (stacking solitons). We find that dislocations can both nucleate and pin the transition and locally alter the transition temperature Tc by nearly ~75 K. This finding was enabled by the application of unsupervised machine learning to cluster five-dimensional, terabyte scale datasets, which demonstrate a one-to-one correlation between resistance-a global property-and local CDW domain-dislocation dynamics, thereby linking the material microstructure to device properties. This work represents a major step toward defect-engineering of quantum materials, which will become increasingly important as we aim to utilize such materials in real devices.

Effect of thiol adsorption on the electrical resistance of copper ultrathin films

The impact of thiol adsorption on thin copper films, covered with a copper oxide layer, was investigated using electrical resistance measurements at various stages: during film growth, aging, exposure to air, and immersion in thiol solutions. Thin copper films (20 nm) were thermally evaporated, with variations in substrate temperature (RT, 330 and 390 K). Films deposited at 330 K exhibited the smallest percolation thickness and aging rates due to their compact morphology, showcasing lower surface roughness and correlation length. Exposure to air led to the formation of a Cu2O layer on the film surface. Subsequent immersion in a dodecanethiol solution in ethanol resulted in a resistance increase, ranging from 0.1 % to 0.4 %. This change was dependent on the substrate temperature, with the largest difference observed at 330 K. This observation suggests that samples grown at this temperature exhibited the highest electron-surface scattering. Moreover, by depositing a chromium surfactant layer, the impact of this scattering mechanism was amplified, leading to a resistance increase of up to 1.2 %. Mayadas-Shatzkes theory provided a good description of these resistance changes. The negatively charged S-head of the adsorbed thiols alters the electric field experienced by conduction electrons in the Cu2O/Cu interface, modifying the electron-surface scattering.

Anisotropic mechanical and sensing properties of carbon black-polylactic acid nanocomposites produced by fused filament fabrication

3D-printable conductive polymers are gaining remarkable attention for diverse applications, including wearables, pressure sensors, interference shielding, flexible electronics, and damage identification. However, the relationship between the anisotropy of their mechanical and electrical properties remains rather unexplored. This study focuses on characterizing Polylactic Acid/Carbon Black nanocomposites manufactured through fused filament fabrication. It aims to investigate the effect of the orientation of 3D printing layers on the mechanical properties, failure mechanisms, and self-sensing capabilities of the 3D printed material. To this end, we use a coupled health monitoring system in which electrical resistance measurements are applied to diagnose the damage state of 3D-printed samples during tensile testing. The results provide novel insights into the strong dependence of the material behavior on 3D printing pattern orientation, suggesting avenues for optimizing mechanical and electrical anisotropy through a multi-objective approach. Additionally, they offer guidelines for designing self-sensing components for structural health monitoring applications and strain gauge sensors with superior performance.

Synthesis, Physical, and Magnetocaloric Properties of MgZn2-Type Gd2Al3Rh.

Gd2Al3Rh was synthesized from the elements using arc-melting techniques, along with subsequent annealing. The title compound adopts the hexagonal MgZn2 type structure (space group P63/mmc, hP12, Wyckoff sequence hfa) with the Gd atoms found on the Mg positions (4f), the Rh (2a) and Al (6h) atoms occupying the two Zn sites of the prototype. In addition, mixing of Rh and Al on both crystallographic positions is observed. The magnetic susceptibility and magnetization experiments were conducted indicating ferromagnetic ordering below the Curie temperature of TC = 51.3(1) K and very high magnetization of 6.96(1) μB at 3 K and 70 kOe. In addition, heat capacity and electrical resistivity measurements were conducted. The magnetocaloric properties of ferromagnetic Gd2Al3Rh have been determined by means of magnetization measurements. For a field change of ΔH = 0 → 50 kOe the magnetic entropy change equals ΔSMmax = -4.8 J kg-1 K-1, leading to a relative cooling power of RCP = 283 J kg-1 for the same field change. The adiabatic temperature change was estimated to be ΔTadmax = 2.1 K using the heat capacity data.

Enzymatic Modulation of the Pulmonary Glycocalyx Enhances Susceptibility to Streptococcus pneumoniae.

The pulmonary epithelial glycocalyx is rich in glycosaminoglycans such as hyaluronan and heparan sulfate. Despite their presence, the importance of these glycosaminoglycans in bacterial lung infections remains elusive. To address this, we intranasally inoculated mice with Streptococcus pneumoniae in the presence or absence of enzymes targeting pulmonary hyaluronan and heparan sulfate, followed by characterization of subsequent disease pathology, pulmonary inflammation, and lung barrier dysfunction. Enzymatic degradation of hyaluronan and heparan sulfate exacerbated pneumonia in mice, as evidenced by increased disease scores and alveolar neutrophil recruitment. However, targeting epithelial hyaluronan in combination with Streptococcus pneumoniae infection further exacerbated systemic disease, indicated by elevated splenic bacterial load and plasma levels of pro-inflammatory cytokines. In contrast, enzymatic cleavage of heparan sulfate resulted in increased bronchoalveolar bacterial burden, lung damage and pulmonary inflammation in mice infected with Streptococcus pneumoniae. Accordingly, heparinase-treated mice also exhibited disrupted lung barrier integrity as evidenced by higher alveolar edema scores and vascular protein leakage into the airways. This finding was corroborated in a human alveolus-on-a-chip platform, confirming that heparinase treatment also disrupts the human lung barrier during Streptococcus pneumoniae infection. Notably, enzymatic pre-treatment with either hyaluronidase or heparinase also rendered human epithelial cells more sensitive to pneumococcal-induced barrier disruption, as determined by transepithelial electrical resistance measurements, consistent with our findings in murine pneumonia. Taken together, these findings demonstrate the importance of intact hyaluronan and heparan sulfate in limiting pneumococci-induced damage, pulmonary inflammation, and epithelial barrier function and integrity.

Influence of Long Milling Time on the Electrical Resistivity of Nanocrystalline Ni2MnSn Heusler Alloy Obtained by Mechanosynthesis.

A Ni2MnSn Heusler alloy was obtained as a single B2 phase after 12 h of mechanical milling. The influence of prolonged milling on the phase stability was analysed for milling times up to 50 h, related to mean crystallite size, lattice strain, and electrical resistivity. The nature of the powders in the milled range was found to be nanocrystalline, with a mean crystallite size of about 33 ± 2 nm. An evaluation of the internal stresses induced by milling was performed, a linear behaviour was found, and a coefficient of the internal stress increase with milling time was proposed. Particle size distributions of milled samples were analysed, and the morphology of the powders was visualised by scanning electron microscopy. The elemental distribution of milled samples was quantified by energy-dispersive X-ray spectroscopy. Electrical resistivity measurements were performed on compacted samples, and their behaviour with milling time was analysed.

Magnetic vortex polarity reversal induced gyrotropic motion spectrum splitting in a ferromagnetic disk

We investigate the gyrotropic motion of the magnetic vortex core in a chain of a few micron-sized Permalloy disks by electrical resistance measurement with amplitude-modulated magnetic field. We observe a distinctive splitting of the resistance peak due to the resonant vortex-core motion under heightened radio frequency (RF) magnetic field excitation. Our micromagnetic simulation identifies the splitting of the resonant peak as an outcome of vortex polarity reversal under substantial RF amplitudes. This study enhances our understanding of nonlinear magnetic vortex dynamics amidst large RF amplitudes and proposes a potential pathway for spintronic neural computing thanks to their unique and controllable magnetization dynamics.

Ca substitution effects on structure transformation and physical properties of (Eu,Ca)FeAs2 co-doped with La and Co

In this study, Ca substitution and carrier doping effect on phase formation temperature and physical/superconducting properties of (Eu0.9-xCaxLa0.1)(Fe0.97Co0.03)As2 ((Eu,Ca)112, x = 0–0.4) compounds were investigated. The best synthesis condition for obtaining pure phases vary (850–900 °C) depending on the Ca substitution amount. Ca substitution in the EuFeAs2 structure induced a structural transformation from orthorhombic I2mm to monoclinic P21/m symmetry. Single crystals of EuFeAs2 and (Eu0.9La0.1)FeAs2 were grown and their crystal structures were determined. Density functional theory calculations confirmed the transformation and stability of the La-doped Eu112 crystal structure with Ca substitution. Compared with the parent compound EuFeAs2, the effective substitution of Ca reduced the lattice constants. The magnetic and transport properties of (Eu0.9-x,Cax,La0.1)(Fe0.97,Co0.03)As2 compounds were studied using the temperature and field dependence of the magnetization and electrical resistivity measurements. Ca substitution suppressed the magnetic ordering of Eu and gradually reduced the Néel temperature TNEu. As determined by the magnetization and electrical resistivity data, the onset of Tc values increased with Ca substitution increment from 26 K to 32.2 K and 31 K to 34.8 K. Ca substitution slightly increased the upper critical field values, while the coherence length ξ values were slightly decreased. The Ca substitution and sintering temperature dependence of superconductivity, upper critical fields, lower critical fields, and Eu-related magnetic transitions were extracted. The new series of Eu-containing iron-based superconductors with high Tc provides an interesting playground in this field.

Synthesis and structural characteristics of AgxSn1–xO2 nanocomposites and their sensing performance toward methane, hydrogen, and carbon monoxide

The physical features and potential applications of metal oxide semiconductor nanomaterials can be influenced by doping, heat treatment, and applied synthesis techniques. Herein, a simple hydrothermal method was used to synthesize AgxSn1–xO2 nanocomposites (x=0, 0.05, 0.2, 0.4, 0.5, and 1). The crystal structure, surface morphology, chemical bonding, surface area, and oxidation states are investigated. FTIR, XRD, HR-TEM, SEM, and XPS techniques were used to characterize the AgxSn1–xO2 nanocomposites, while the electrical resistivity measurement was conducted to assess their gas-sensing characteristics. The findings demonstrate that Ag atoms are evenly distributed inside the tetragonal SnO2 lattice up to x=0.4, meanwhile, a further increase in x leads to the growth of a cubic Ag2O phase alongside the SnO2 phase. The crystallite size of the SnO2 phase was increased as the Ag concentration increased, whereas reduced for the Ag2O phase. The pure SnO2 phase exhibits spherical nanoparticles, whereas the AgxSn1–xO2 nanocomposites (x > 0) have a morphology of nanosheets and nanoplates. The average BET surface area was improved to 358 m2/g by increasing the Ag content up to x=0.2. The XPS confirms the presence of various oxides such as Sn 3d, O 1 s, and Ag 3d. The AgxSn1–xO2 nanocomposites were employed as electrical sensors to detect CH4, H2, and CO gases at an operating temperature range of 200–400 °C. The Ag0.2Sn0.8O2 nanocomposites show the best response/recovery time towards CH4 at 200 °C. The AgxSn1–xO2 composite exhibits a good response towards CH4 compared to H2, and CO gases.

Superconductivity in a New High-Entropy Alloy (NbTi)$$_{0.67}$$(MoHfV)$$_{0.33}$$

AbstractThe structural and superconducting properties of a new niobium- and titanium-rich high-entropy alloy (NbTi)$$_{\text {0.67}}$$ 0.67 (MoHfV)$$_{\text {0.33}}$$ 0.33 were determined. The alloy was synthesized by arc melting and its physical properties were characterized by means of X-ray powder diffraction, energy dispersive X-ray spectroscopy, magnetization, electrical resistivity and specific heat measurements. Experimental data revealed that the (NbTi)$$_{\text {0.67}}$$ 0.67 (MoHfV)$$_{\text {0.33}}$$ 0.33 crystalizes in body-centered cubic structure and exhibits type-II superconductivity below about 5 K. In addition, electronic structure calculations were performed using the Density Functional Theory (DFT) method. Their results suggest that in case of HEAs, the influence of the local atomic configuration on their electronic structure in the energy region close to E$$_{\mathrm {\text {F}}}$$ F is rather small or even negligible.

Electric field control of the energy gap in ZnO and BaSnO3 films grown on PMN-PT

ZnO and BaSnO3 (BSO) thin films grown on Pb(Mg1/3Nb2/3)O3-PbTiO3 (PMN-PT) substrates have been studied using electrical resistance and photoconductivity (PC) spectra measurements under different applied electric fields on the substrate. The behavior of the resistance and the energy gap (EG) extracted from the PC spectra are modified by the polarization state of the substrate in the case of the ZnO film, while for BSO, these physical parameters depend on the strain imposed by the substrate when a voltage is applied on the PMN-PT. In the latter case, an in-plane tensile (compressive) strain leads to a reduction (increase) in the resistance and the energy gap when an external electric field is applied on the substrate. The behavior of ZnO and BSO can be explained by the different crystalline structure in both films and by the fact that ZnO is also a piezoelectric material. In ZnO, a change in the polarization state of the substrate is associated with an imposed strain and an induced polarization on the film that leads to a modification of the band bending and hence of the energy gap. In the case of BSO, a shift of the impurity and conduction band generates a modification of the energy gap for the different types of strain.

Assessing the Effect of Twisting and Twisting Fatigue on ZnO:Al Thin Film Performance on PEN and PET Substrates.

This study examines the electromechanical characteristics of aluminium-doped zinc oxide (AZO) films. The films were produced using the RF magnetron sputtering process with a consistent thickness of 150 nm on various polymer substrates. The study focuses on assessing the electro-mechanical failure processes of coated segments using flexible substrates, namely polyethylene naphthalate (PEN) and polyethylene terephthalate (PET), with a specific emphasis on typical cracking and delamination occurrences. This examination involves conducting twisting deformation together with using standardised electrical resistance measurements and optical microscope monitoring instruments. It was found that the crack initiation angle is mostly dependent on the mechanical mismatch between the coating and substrate. Higher critical twisting angle values are observed for the AZO/PEN film during twisting testing. Relative to the perpendicular plane of the untwisted sample, it was found that cracks initiated at a twist angle equal to 42° ± 2.1° and 38° ± 1.7° for AZO/PEN and AZO/PET, respectively, and propagated along the sample length. SEM images indicate that the twisting motion results in deformation in the thin film material, leading to the presence of both types of stress in the film structure. These discoveries emphasise the significance of studying the mechanical properties of thin films under different stress conditions, as it can impact their performance and reliability in real-world applications. The electromechanical stability of AZO was found to be similar on both substrates during fatigue testing. Studying the electromechanical properties of various material combinations is important for selecting polymer substrates and predicting the durability of flexible electronic devices made from polyester.

Structure, bonding, and properties of RCr6Ge6 intermetallics (R[dbnd]Gd–Lu)

We report the discovery and characterization of three novel ternary compounds: TmCr6Ge6, YbCr6Ge6, and LuCr6Ge6, which complete the series of RCr6Ge6 intermetallics with kagome lattice. Energy dispersive X-ray analysis revealed the off-stoichiometric composition of RCr6Ge6 (RGd, Tb, Dy, Ho, Er, Tm, Yb, and Lu). The powder XRD analysis with subsequent Rietveld refinement showed that investigated compounds crystallize in the SmMn6Sn6 structure type (space group P6/mmm), a disordered variant of the MgFe6Ge6-type, with a small number of vacancies at the rare earth (1a) and germanium (2e) sites and two additional 1b and 2e sites partially occupied by additional rare earth and germanium atoms, respectively. A tendency to structure ordering is observed with decreasing rare earth ionic radii. Electrical resistivity measurements indicate a metallic conductivity type for all studied compounds. Magnetic characterization reveals paramagnetic behavior for TmCr6Ge6 and LuCr6Ge6, respectively, and suggests YbCr6Ge6 as a ferrimagnetic material. The DFT modeling of RCr6Ge6 shows a distinct high electron localization between Ge1 atoms, corresponding to strong covalent bonding. The calculated enthalpies of formation range from −18.56 kJ/mol for Gd to −19.60 for Tm compounds, while the distribution of the density of electronic states (DOS) confirms the metallic type of conductivity for all the series. The calculated elastic properties show brittle behavior and a high hardness level for the whole series. DFT modeling allowed us to reveal mechanisms of RCr6Ge6 formation and the origin of disorder in their crystal structure.

Direct implementation of a frequency-programmable Josephson voltage standard to provide an SI traceable optical power scale

We have developed a technique to determine the electrical substitution power of a cryogenic optical radiant power detector, that directly implements a frequency-programmable Josephson voltage standard (FPJVS), thus reducing the traceability chain. The optical power detector and the Josephson voltage reference are combined inside a common cryogenic environment. We demonstrate the practicality of the technique by using a FPJVS to apply a known voltage across the resistive heater of a standard NIST cryogenic planar radiometric detector. The power applied to the detector heater is calculated from a measurement of the heater resistance and the known applied voltage. The FPJVS dc bias current source supplies dc current to the resistive heater. In this demonstration, the standard uncertainty of the substituted electrical power is limited by the uncertainty of the electrical heater four-wire resistance measurement at 4 K. The uncertainty due to the resistance measurement is 1 part in 105 out of a total uncertainty of 1 part in 104 (k = 2) on the 1 mW optical power measurement. We aim to develop the technique, to provide traceability to the International System of Units for the picowatt power measurement of single-photon emitters such as quantum dot sources.

Structural Lightweight Concrete Containing Basalt Stone Powder

In spite of the demonstrated efficacy of basalt stone powder as a cost-effective and readily available additive in enhancing the mechanical properties and durability of ordinary-weight concrete, its application in Structural Lightweight Concrete (SLWC) remains unexplored. This study introduced a mixing design for SLWC incorporating Light Expanded Clay Aggregates (LECAs) and basalt stone powder with a subsequent evaluation of its strength and durability characteristics. The experimental procedure involved creating various samples, considering differing proportions of cement, water, basalt stone powder, sand, LECA, superplasticizer, and aerating agent. The compressive strength and density of the 28-day-cured concrete specimens were determined. An optimal SLWC with a compressive strength of 42 MPa and a density of 1715 kg/m3 was identified. The flexural and tensile strength of the optimal SLWC exceeded those of ordinary-weight concrete by 6% and 3%, respectively. Further evaluation revealed that the optimal SLWC exhibited 1.46% water absorption and an electrical resistivity of 139.8 Ohm.m. Notably, the high porosity of LECA contributed to the low durability of SLWC. To address this, cost-effective external coatings of emulsion and fiberglass were applied to enhance the durability of the SLWC. Four coating scenarios, including one-layer bitumen, two-layer bitumen, three-layer bitumen, and three-layer bitumen with fiberglass, were investigated. The measurements of electrical resistance and compressive strength revealed that the use of three layers of emulsion bitumen and fiberglass improved the durability of the concrete by over 90% when the SLWC was exposed to severe chloride attack. Consequently, the durability of the SLWC with an external coating surpassed that of ordinary-weight concrete.

Phase transition and comparative study of CuxCd1–xS (x = 0.8, 0.6, 0.4, and 0.2) nanoparticle system

Microwave-assisted chemical precipitation was used to prepare CuxCd1–xS (x = 0.8, 0.6, 0.4, and 0.2) nanoparticles mixture. The crystal structure, size, and surface morphology of the as-synthesized nanoparticles were studied using X-ray diffraction and SEM. Presence of copper, cadmium, and sulphur in proper ratios in the samples was confirmed by energy-dispersed X-ray analysis. DC electrical resistance measurements of all the samples in the temperature range of 300…500 K showed phase transition above a certain temperature.

Electrical Resistivity Measurements of Surface-Coated Copper Foils.

Due to the direct contact between the probe and sample, the contact of the four-probe method is important for the structural integrity of the sample and the accuracy of electrical resistivity measurements, especially for surface-coated metal foils with multilayered structures. Here, we analyzed the accuracy and stability of four-probe method probing on different sides of copper (Cu) foils covered with graphene (Gr). Theoretical simulations showed similar potential distributions on the probe tip when probing on the Cu and Gr sides. The resistivity of the Gr/Cu foil was 2.31 ± 0.02 μΩ·cm when measured by probing on the Cu side, and 2.30 ± 0.10 μΩ·cm when measured by probing on the Gr side. The major difference in the mean deviation is attributed to surface damage. In addition, the method of probing on the Cu side was sensitive to the resistivity changes of Gr induced by polymers with a dielectric constant range of 2~12, which is consistent with the calculations based on the random phase approximation theory. Our results demonstrated that the probing position on the metal side in the four-probe method can effectively protect the structural integrity of the functional surface-coated layer and maintain the high sensitivity of the measurement, providing guidance for the resistivity measurements of other similarly heterogeneous materials.

Pressure generation under deformation in a large-volume press

Abstract Deformation can change the transition pathway of materials under high pressure, thus significantly affects physical and chemical properties of matters. However, accurate pressure calibration under deformation is challenging and thereby causes relatively large pressure uncertainties in deformation experiments, resulting in the synthesis of complex multiphase materials. Here, pressure generations of three types of deformation assemblies were well calibrated in a Walker-type large-volume press (LVP) by electrical resistance measurements combined with finite element simulations (FESs). Hard Al2O3 or diamond pistons in shear and uniaxial deformation assemblies significantly increases the efficiency of pressure generation compared with the conventional quasi-hydrostatic assembly. The uniaxial deformation assembly using flat diamond pistons possess the highest efficiency in these deformation assemblies. This finding is further confirmed by stress distribution analysis based on FESs. With this deformation assembly, we found shear can effectively promote the transformation of C60 into diamond under high pressure and realized the synthesis of pure-phase diamond at relatively moderate pressure and temperature conditions. The present developed techniques will help improve pressure efficiencies in LVP and explore the new physical and chemical properties of materials under deformation in both science and technology.

Development of High-Sensitivity Thermoplastic Polyurethane/Single-Walled Carbon Nanotube Strain Sensors through Solution Electrospinning Process Technique

In this study, nanofibers obtained through the electrospinning process are explored for strain-sensing applications. Thermoplastic polyurethane (TPU) flexible structures were fabricated using the solution electrospinning process (SEP) technique. Subsequently, these structures were nanomodified with single-walled carbon nanotubes (SWCNTs) through immersion into an ultrasonicated suspension containing 0.3 wt% SWCNTs. The nanomodification aimed to impart an electrically conductive network to the structures. Micro-tensile tests and electrical resistance measurements were conducted to characterize the apparent mechanical and electrical properties, respectively. The fabricated structures demonstrated potential as wearable strain sensors for monitoring changes in strain across various applications. The samples exhibited excellent performance, high sensitivity, outstanding mechanical properties, and a broad stretching range. Scanning electron microscopy (SEM) observations provided qualitative insights into the activated conductive pathways during operation.

Comparison of the Impact of VRP-034 and Polymyxin B upon Markers of Kidney Injury in Human Proximal Tubule Monolayers In Vitro.

In this study, we assessed the impact of commercially available polymyxin B against VRP-034 (novel formulation of polymyxin B) using a validated in vitro human renal model, aProximateTM. Freshly isolated primary proximal tubule cells (PTCs) were cultured in Transwell plates and treated with various concentrations of the formulations for up to 48 h. The functional expression of megalin-cubilin receptors in PTC monolayers was validated using FITC-conjugated albumin uptake assays. Polymyxin B and VRP-034 were evaluated at six concentrations (0.3, 1, 3, 10, 30, and 60 µM), and nephrotoxicity was assessed through measurements of transepithelial electrical resistance (TEER), intracellular adenosine triphosphate (ATP) levels, lactate dehydrogenase (LDH) release, and novel injury biomarkers [kidney injury molecule-1 (KIM-1), neutrophil gelatinase-associated lipocalin (NGAL), and clusterin]. Additionally, histological analysis using annexin V apoptosis staining was performed. Our results indicated a significant decrease in TEER with polymyxin B at concentrations ≥10 μM compared to VRP-034. Toxic effects were observed from ATP and LDH release only at concentrations ≥30 μM for both formulations. Furthermore, injury biomarker release was higher with polymyxin B compared to VRP-034, particularly at concentrations ≥10 µM. Histologically, polymyxin B-treated PTCs showed increased apoptosis compared to VRP-034-treated cells. Overall, VRP-034 demonstrated improved tolerance in the aProximateTM model compared to polymyxin B, suggesting its potential as a safer alternative for renal protection.