Abstract
In spite of the demonstrated efficacy of basalt stone powder as a cost-effective and readily available additive in enhancing the mechanical properties and durability of ordinary-weight concrete, its application in Structural Lightweight Concrete (SLWC) remains unexplored. This study introduced a mixing design for SLWC incorporating Light Expanded Clay Aggregates (LECAs) and basalt stone powder with a subsequent evaluation of its strength and durability characteristics. The experimental procedure involved creating various samples, considering differing proportions of cement, water, basalt stone powder, sand, LECA, superplasticizer, and aerating agent. The compressive strength and density of the 28-day-cured concrete specimens were determined. An optimal SLWC with a compressive strength of 42 MPa and a density of 1715 kg/m3 was identified. The flexural and tensile strength of the optimal SLWC exceeded those of ordinary-weight concrete by 6% and 3%, respectively. Further evaluation revealed that the optimal SLWC exhibited 1.46% water absorption and an electrical resistivity of 139.8 Ohm.m. Notably, the high porosity of LECA contributed to the low durability of SLWC. To address this, cost-effective external coatings of emulsion and fiberglass were applied to enhance the durability of the SLWC. Four coating scenarios, including one-layer bitumen, two-layer bitumen, three-layer bitumen, and three-layer bitumen with fiberglass, were investigated. The measurements of electrical resistance and compressive strength revealed that the use of three layers of emulsion bitumen and fiberglass improved the durability of the concrete by over 90% when the SLWC was exposed to severe chloride attack. Consequently, the durability of the SLWC with an external coating surpassed that of ordinary-weight concrete.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.