Electrical Conductivity Of Material Research Articles

Nitrogen doping enhances pseudocapacitive lithium storage and ionic conductivity in Ti2Nb2O9 nanosheets

Titanium-niobium oxides (TixNbyO2x+2.5y) are promising anode materials for lithium-ion batteries due to their suitable lithium insertion potential, excellent rate performance, cycling stability, and considerable capacity based on multi-electron reactions. However, the intrinsic low electrical conductivity and rapid capacity decay during cycling limit their application. In this study, nitrogen-doped Ti2Nb2O9 nanosheets were synthesized using a chemical exfoliation method and the subsequent high-temperature phase transition. Meanwhile, introducing nitrogen atoms reduced the bandgap and increased the material's electrical conductivity. Thus, the lithium storage performance of the N-TNO electrode was improved with a reversible capacity of 348.1 mAh g−1.

Lightweight 3D-printed heaters: design and applicative versatility

This paper proposes a new strategy for designing a 3D-printed heater that can overcome some criticalities of current commercial heater devices for application in the transport and energy sectors. A semiconductive nanocomposite material, acrylonitrile-butadiene-styrene filled with carbon nanotubes (ABS-CNT), was processed via Fused Filaments Fabrication (FFF). The printing was set to favor the current flow along the printing direction, consequently increasing the material's electrical conductivity. 3D-printed heater geometry, equivalent to several electrical resistances (resistive branches) connected in parallel, was optimized by varying the width, thickness, lengths, and number of branches. The adopted approach resulted in a flexible and scalable low-equivalent resistance value heater. Moreover, the optimized heater's flexibility allows it to be integrated into a curved fiberglass composite. Joule heating tests were experimentally performed and theoretically simulated by a multi-physics model. The numerical prediction resulted in good agreement with the experimental data. The results encourage the application of 3D-printed heaters as functional patches for the thermal management of different devices/components, including complex-shape composite structures.

Synthesis and Electrochemical Performance Enhancement of Li2MnSiO4 Cathode Material for Lithium‐Ion Batteries via Mn‐Site Ni Doping

AbstractIn exploring the potential of Li2MnSiO4 as a cathode material for lithium‐ion batteries (LIBs), the key challenges often involve enhancing electronic conductivity and lithium‐ion diffusion rates. To address these issues, this paper proposes the combination of solid‐state doping and a two‐step calcination process to successfully prepare the Li2Mn1−xNixSiO4 series of cathode materials, where Ni substitutes Mn at different doping amounts (x = 0, 0.02, 0.04, 0.06, 0.08). The use of chemically equivalent Ni2+ ions to replace Mn2+ ions is an effective method. Since the ionic radius of Ni2+ is smaller than that of Mn2+, this substitution can create more voids in the lattice structure. These increased voids provide smoother channels for the transport of electrons and lithium ions, thereby improving the material's electrical conductivity. At a Ni doping amount of 0.06, the material exhibits optimal electrochemical performance, achieving a discharge capacity of 155 mAh g−1 at 0.1 C, significantly superior to undoped lithium manganese silicate. The doping of Mn sites with Ni significantly improves the conductivity and lithium‐ion diffusion capabilities of Li2MnSiO4, revealing the tremendous potential of doping strategies in optimizing the performance of LIBs cathode materials.

Oxygen vacancy modulated optical and dielectric properties of photoactive γ-Fe2WO6

Ferrite compounds have gained scientific attention for their multifunctional attributes. This investigation explores the structural, optical, dielectric and conductivity properties of polycrystalline γ-Fe2WO6 synthesized by the solid state route. The X-ray diffraction confirmed the orthorhombic structure and single-phase formation, while the electron microscopy showed uniform distribution of dense micrometer-sized grains in γ-Fe2WO6. The FTIR spectroscopy analysis validated the presence of active stretching and bending modes, signifying oxygen anion vibration at both Fe and W sites. The simultaneous presence of Fe2+ and Fe3+ ions in the matrix, as confirmed by X-ray photoelectron spectroscopy (XPS), results in an augmented optical energy band gap and contributes to dielectric permittivity due to the charge carrier hopping mechanism between the trap sites. The compound manifests semiconductor attributes, evident in its indirect optical band gap measuring 1.7 eV. It is observed that the compound has effectively degraded the Methylene Blue (MB) under the visible light within 40 min with a degradation efficiency up to 63 %. The material's electrical conductivity, follows the Jonscher's power law, signifies its semiconductor nature and adheres to the Small Polaron tunneling model for charge conduction between neighboring sites. The impedance (Z′) curves exhibit dielectric relaxation (≤ 10 kHz) with a similar activation energy to the dc conductivity study. The activation energy, determined from both the impedance and conductivity analyses, indicates a connection with the migration of oxygen vacancies within the material. Our observation reveals the presence of oxygen vacancies, which possibly act as in-gap electron traps, enhancing the correlated optical and ac conductivity properties, making it an appealing material for diverse multifunctional applications.

An electric conductive wide-temperature flexible phase change material for all-climate battery thermal management

Battery thermal management with phase change materials (PCM) has been limited by leakage, low thermal conductivity and rigidity, and the inability to preheat at low temperatures. To solve these problems, a wide-temperature flexible composite PCM (FCPCM) was prepared with a high-temperature open refining method. Styrene ethylene butylene styrene (SEBS) and expanded graphite (EG) absorb paraffin (PA) onto a three-dimensional network. The FCPCM possesses good flexibility before and after phase transition. It can be bent and stretched arbitrarily at room temperature, and the shape memory function enable it can be restored to its original state after heating. The latent heat of the FCPCM-15 is 159.9 J/g and its thermal conductivity was 7.45 times higher than that of pure paraffin. The FCPCM also possesses a good volume conductivity of 92–2952 S/m and allows for uniform electrical heating. The excellent thermal and electrical performance of the FCPCM allows it to cool batteries at high temperatures and preheat batteries at low temperatures. After ten charge/discharge cycles at 30 °C, the battery pack’s temperature based on FCPCM cooling is still reduced by 3.9 °C. At a low temperature of −20 °C, the preheating rate of the battery pack can reach 12.9 °C/min, and the discharge voltage and capacity of the battery pack were increased by 15 % and 20.8 % after preheating. The FCPCM suggests a promising and practical approach way for the all-climate thermal management of batteries.

Evaluation of multi-walled carbon nanotubes alignment during 3D printing of poly(acrylonitrile-butadiene-styrene) nanocomposite filaments

Nanocomposites incorporated with one-dimensional electrical conductive materials such as carbon nanotubes have been used in many applications in various industries. In this research, the filaments made of poly (acrylonitrile-butadiene-styrene) (ABS) containing 1, 3, and 5 wt% multi-walled carbon nanotubes (MWCNT) were first prepared and then printed in three directions and two printing speeds. The rheological and electrical percolation thresholds were found to take place at 0.32 and 0.96 wt% MWCNT, respectively. Using the Casson plot, it was revealed that the yield stress of the nanocomposites containing 5 wt% MWCNT was 70 times higher than that of the pristine ABS. The results also indicated that the electrical resistance decreased from 17.4 to 6.8 Ω with the increase in printing speed from 4 to 20 mm/s, respectively. The alignment of the nanofillers was examined using X-ray diffraction method. It was found from the azimuth angle that the materials printed at higher printing speed had more orientation, with respect to the director, in comparison with that of printed at lower speed.

Application of Computer Calculation in the Study of Grain Boundary

A grain boundary (GB) is a structure of great concern in materials research, which affects the mechanical properties and electrical conductivity of materials, but the microscopic thermodynamic properties of GBs cannot be explained comprehensively. In this review, we demonstrate a variety of calculation methods for GBs: density functional theory (DFT) and molecular dynamics (MDs) aim to extract the thermodynamic and kinetic properties of GBs on the atomic scale, and machine learning accelerates DFT or improves the accuracy of MDs. These methods explain the microscopic properties of a GB from different perspectives and are combined by machine learning. It is hoped that this review can inspire new ideas and provide more practical applications of computer calculations in GB engineering.

Ab initio modeling and experimental analysis of electronic conductivity in PEDOT:PSS-PEO films for extrusion-based manufacturing

In this study, a combination of ab initio modeling and experimental analysis is presented to investigate and elucidate the electronic conductivity of films composed of conducting polymer blend PEDOT:PSS-PEO. Detailed density functional theory (DFT) calculations, aligned with experimental data, aided at profound understanding of the chemical composition, band structure, and the mechanical behavior of these composite materials. Systematic evaluation across diverse ratios of PEDOT, PSS, and PEO revealed a pronounced transformation in electronic properties. Specifically, the addition of PEO into the polymer matrix remarkably changes the band gap, with a marked alteration observed near a PEO concentration of 52 wt-%. This adjustment led to a substantial enhancement in the electrical conductivity, exhibiting an increase by a factor of approximately 20, compared to the original PEDOT:PSS polymer. The present investigation determined the crucial role of the PEDOT to PSS ratio in band gap determination, emphasizing its significant impact on the material's electrical conductivity. Concurrently, the mechanical property analysis unveiled a consistent increase in Young's modulus, reaching up to 765.93 MPa with increased PEO content, signifying a notable mechanical stiffening of the blend. The obtained combined theoretical and experimental insights illustrate a detailed perspective on the conductivity anomalies observed in PEDOT:PSS-PEO systems, establishing a robust framework for designing highly conducting and mechanically stable polymer blends. This comprehensive approach elucidates the interplay between chemical composition and electronic behavior, offering a strategic pathway for extrusion-based manufacturing techniques such as Direct Ink Writing (DIW).

Sea Urchin-Like NiCo-LDH Hollow Spheres Anchored on 3D Graphene Aerogel for High-Performance Supercapacitors.

To enhance the inherent poor conductivity and low cycling stability of dimetallic layered double hydroxides (LDHs) materials, designing a synergistic effect between EDLC capacitors and pseudocapacitors is an efficient strategy. In this paper, we utilized a solvothermal technique employing Co-glycerate as a precursor to prepare sea urchin-like NiCo-LDH hollow spheres anchored on a 3D graphene aerogel. The unique morphology of these hollow microspheres significantly expand the specific surface area and exposes more active sites, while reducing the volume changes of materials during long-term charging and discharging processes. The 3D graphene aerogel serves as a conductive skeleton, improving the material's electrical conductivity and buffering high current. The sea urchin-like NiCo-LDH hollow spheres anchored on 3D graphene aerogel (H-NiCo-LDH@GA) has a specific surface area of 51 m2 g-1 and the ID/IG value is 1.02. The H-NiCo-LDH@GA demonstrate a significant specific capacitance of 236.8 mAh g-1 at 1 A g-1, with a remarkable capacity retention rate of 63.1 % even at 20 A g-1. Even after 8000 cycles at 10 A g-1, the capacity retention still remains at 96.3 %, presenting excellent cycling stability.

The mechanistic insights of essential oil of Mentha piperita to control Botrytis cinerea and the prospection of lipid nanoparticles to its application

Botrytis cinerea is the phytopathogenic fungus responsible for the gray mold disease that affects crops worldwide. Essential oils (EOs) have emerged as a sustainable tool to reduce the adverse impact of synthetic fungicides. Nevertheless, the scarce information about the physiological mechanism action and the limitations to applying EOs has restricted its use. This study focused on elucidating the physiological action mechanisms and prospection of lipid nanoparticles to apply EO of Mentha piperita. The results showed that the EO of M. piperita at 500, 700, and 900 μL L−1 inhibited the mycelial growth at 100 %. The inhibition of spore germination of B. cinerea reached 31.43 % at 900 μL L−1. The EO of M. piperita decreased the dry weight and increased pH, electrical conductivity, and cellular material absorbing OD260 nm of cultures of B. cinerea. The fluorescence technique revealed that EO reduced hyphae width, mitochondrial activity, and viability, and increased ROS production. The formulation of EO of M. piperita loaded- solid lipid nanoparticles (SLN) at 500, 700, and 900 μL L−1 had particle size ∼ 200 nm, polydispersity index < 0.2, and stability. Also, the thermogravimetric analysis indicated that the EO of M. piperita-loaded SLN has great thermal stability at 50 °C. EO of M. piperita-loaded SLN reduced the mycelial growth of B. cinerea by 70 %, while SLN formulation (without EO) reached 42 % inhibition. These results supported that EO of M. piperita-loaded SLN is a sustainable tool for reducing the disease produced by B. cinerea.

Two birds with one stone: High electromagnetic interference shielding effectiveness and high thermal conductivity of ternary polyvinyl alcohol/graphene/ carbonyl iron nanocomposite films

Gaining brilliant flexible, easily-processable, bendable, low-density and high electrical conductivity (σ) materials with an excellent electromagnetic-interference (EMI) shielding performance is urgently needed in the fields of aerospace, aircraft, military, wearable and portable electronic industries. Therefore, the growing desire towards miniaturizing and developing high-frequency electronics is increasing incredibly today and grabbing much attention, however, they cause extreme heat accumulation and EM radiations that affect their performances as well as their hazardous effects on human health. So, polymer nanocomposites with high thermal conductivity (k) and EMI shielding effectiveness (SE) synchronously are urgently required to consume the generated heat and blocks the EM waves. Herein, poly(vinyl alcohol)/graphene nanosheets/carbonyl iron (PVA/GRx/CIR0.1-x) nanocomposite films are introduced as a new alternative candidate for EMI shielding applications with high in-plane k//, high mechanical functions, and EMI SET performance. The synergistic effect of GR and CIR on EMI shielding functions, thermal stability, mechanical properties, electrical features, and surface morphology has been explored. The increase in GR(x) amounts provides continuous GR layers and dense networks for conducting electrons and heats, provides the films with an admirable k// and total SE (SET) synchronously. Particularly, the PVA/GR0.08/CIR0.02 films have shown an σ of 1.72 Sm−1, a large SET of 32.94 dB and a specific SE (SSE/t) of 4365 dBcm2g−1 due to the mutual role (effect) of both high electrical conductive graphene and high magnetic carbonyl iron in cancelling the magnetic and electric fields of the incident EM waves. Moreover, the layered structure of GR endows films with a high k// of 3.62±0.11 W/(m·K), which is 14-fold larger than that of green PVA. The high compatibility and fine dispersion of GR/CIR fillers endow the films with a high Young modulus of 2.16 GPa, which is 7-fold larger than that of green PVA. This work suggests a novel and feasible scheme for producing high EMI shielding and high thermal conductive polymeric films, which will have huge prospects in advanced technology such as electromagnetic (microwave) interference shielding, wearable, biological, smart fabrics, military technologies and electronic equipments.

Investigation and development of photocathodes using polyaniline Encapsulated Ti3C2Tx MXene nanosheets for dye-sensitized solar cells.

In the current study, polyaniline (PANI) modified two-dimensional Ti3C2Tx MXene composites (PANI-Ti3C2Tx) are exploited as photocathodes in dye-sensitized solar cells (DSSCs). The study revealed that incorporating PANI into Ti3C2Tx improved the material's electrochemical properties, owing to the presence of amino groups in PANI that enhanced the material's electrical conductivity and thereby facilitated more rapid ion transport. In addition, PANI enhanced the surface wettability of Ti3C2Tx, resulting in an increase in the number of electroactive sites. The presence of PANI molecules in the interlayer and on the surface of Ti3C2Tx was confirmed through X-ray diffraction (XRD), scanning electron microscopy coupled with energy dispersive X-ray spectroscopy (SEM-EDX), and X-ray photoelectron spectroscopy (XPS). Subsequently, electrochemical analysis of the PANI-Ti3C2Tx photocathode or counter electrode (CE) revealed a commendable electrocatalytic activity with the iodide/triiodide electrolyte, a favourable charge transfer kinetics, and a charge transfer resistance as low as platinum. Additionally, at AM 1.5G, the performance of the DSSC constructed using the thermally decomposed Pt-CE was 8.3% when subjected to simulated 1 sun light, whereas the efficiency of the DSSC constructed using the as-prepared composite material was 6.9% under corresponding conditions. PANI-Ti3C2Tx as the photocathode (CE) in a DSSC showed a higher power conversion efficiency (PCE) improvement than PANI CE and Ti3C2Tx CE DSSCs, emphasizing its potent catalytic activity and quick mass transport of electron capability. By capitalizing on the conductivity and electrocatalytic property of the two components, the as-fabricated PANI-Ti3C2Tx photocathode significantly increased the overall PCE of DSSCs. Furthermore, the DSSC utilizing the PANI-Ti3C2Tx CE demonstrated exceptional reproducibility and stability. This underscores its consistently high performance and significant resistance to corrosion in the iodide/triiodide redox electrolyte environment. Overall, these findings show that the PANI-Ti3C2Tx composite has the potential to be a competitive alternative to platinum-based CE materials for the development of DSSCs with exceptional performance.

Electrical stimulation and conductive materials: electrophysiology-based treatment for spinal cord injury.

Spinal cord injury is a serious disease of the central nervous system. The electrophysiological properties of the spinal cord that are essential to maintaining neurotransmission can be impaired after the injury. Therefore, electrophysiological evaluation is becoming an important indicator of the injury extent or the therapeutic outcomes by reflecting the potential propagation of neural pathways. On the other hand, the repair of damaged nerves is one of the main goals of spinal cord injury treatment. Growing research interest has been concentrated on developing effective therapeutic solutions to restore the normal electrophysiological function of the injured spinal cord by using conductive materials and/or exerting the merits of electrical stimulation. Accordingly, this review introduces the current common electrophysiological evaluation in spinal cord injury. Then the cutting-edge therapeutic strategies aiming at electrophysiological improvement in spinal cord injury are summarized. Finally, the challenges and future prospects of neural restoration after spinal cord injury are presented.

Sustainable graphitic carbon from biomass to be suitable for technological devices.

Technological devices are mostly manufactured by conductive and semiconductive materials. As advancement in the last decades, carbon nanomaterials have been explored in electrical/electronic technology due to their unique performances for manufacturing developing, and prudential miniaturized and flexible electrical/electronic devices. In the era of sustainable and clean carbon technology; renewable, alternative, biodegradable, and eco-friendly new carbon resources are required. Biomass could be the answer to offer inspiring carbon allotropes from nature to be suitable for developing electrical/electronic devices. In this article, deriving of the technological carbonaceous material from biomass, studies although they are very limited in the literature on obtaining the electrical conductive ones and the progress as electrical conductive renewable material are presented.

Study of arc behavior and machining effects of the novel magnetic field assisted blasting erosion arc machining method

Electrical Arc Machining (EAM) is a high-efficiency, cost-effective method for machining electrical conductive materials especially difficult-to-cut ones. Because this thermal process relies on high-density energy to melt and remove material, effective arc control is crucial to maintain stable machining without overheating the workpiece. However, due to the limited discharge gap, it is difficult for the existing arc breaking methods to manage the arc plasma in a timely and uniform manner. This paper proposes a novel method named Magnetic Field Assisted Blasting Erosion Arc Machining (M-BEAM). This method introduces a magnetic field to enhance the control effect on arc plasma by directly influencing charged particles. Initially, the arc control and material removal mechanisms were revealed through an analysis and experiments of single arc discharge. Both simulated particle trajectory and high-speed photographs demonstrated that the arc plasma deflects much earlier in the magnetic field than that of traditional BEAM. Moreover, the expulsion effect of molten metal was significantly improved, resulting in a larger volume crater. Building on this, the magnetic-assisted arc control mechanism was utilized to enhance the performance of BEAM. Experimental results indicate that compared with traditional BEAM, Magnetic Field assisted BEAM increases its Material Removal Rate (MRR) by 10.09% while significantly reducing the Tool Wear Ratio (TWR) by 29.02%. Additionally, surface roughness (Sa) is decreased by 47.73%, and the thickness of the recast layer is decreased by 78.54%. Therefore, M-BEAM can further improve the machining performance and build a good foundation for subsequent machining.

Rational design of praseodymium ferrite decorated on reduced graphene oxide for the electrochemical detection of quercetin

According to this research, Quercetin (QR) is a crucial part of the human diet, making inexpensive, quick, and portable sensors necessary for its determination in food samples, dietary supplements, and pharmaceuticals. So, we prepared a hydrothermally synthesized PFO/RGO electrochemical sensor for quercetin detection. In this case, the synthesized composite was verified by XRD, FESEM, HRTEM, EDX, Raman, and XPS which confirms the crystallinity, particle-shaped irregular arrangements, presence of RGO, and elemental composition. EIS and CV analysis revealed the electrode material's electrical conductivity was increased by the RGO nanosheets, which supported the electrical conductivity of PFO. The electrochemical measurements proved the designed PFO/RGO sensor's excellent QR sensitivity and selectivity. The proposed sensor was optimized for sensing QR followed by a linear response of 0.01–225 µM and LOD of 0.026 µM with an excellent sensitivity of 1.674 µA µM−1 cm−2. We also evaluated the practical performance of the proposed PFO/RGO sensor against QR in the actual fruit samples, which showed good recovery results.

The hardness and electrical conduction in TiB2 and MgB2: Computational insights

Achieving the coexistence of hardness and electrical conduction in materials is of great interest for fundamental scientific understanding and practical technological applications. Here, we investigated the hardness and electrical conduction of isostructural TiB2 and MgB2 based on the dislocation theory and first-principles calculations. The calculated hardness values obtained by the Sachs deformation texture model (20.20 GPa for TiB2 and 12.96 GPa for MgB2 at 300 K) are in good agreement with the measured ones (21.2 ± 1.1 GPa for TiB2 and 12.65 ± 1.39 GPa for MgB2). The analysis of hardness indicates that the dislocations on the {0001} and {10 1¯ 0} planes have the lower activation energy, and their movements are the main plastic deformation modes of TiB2 and MgB2. But, the hardness of TiB2 is larger than that of MgB2. From the perspective of the bonding mechanism, the strong Ti-B bonds associated with the hybridization of Ti 3d and B 2p states play a crucial role in the hardness of TiB2. Electrical conduction in TiB2 mainly results from the contribution of Ti 3d electrons, while it is from the partially occupied B σ- and π-bonding orbitals in MgB2.

Heterogeneous metallic glass composites with a unique combination of strength, plasticity and conductivity

Metallic glass-reinforced Cu-based composites offer a promising avenue for overcoming the trade-off between high strength and high electrical conductivity in materials. In this investigation, heterogeneous CuZrAl metallic glass-reinforced CuCrZr alloy composites are prepared through spark plasma sintering and a one-step hot pressing. The microstructural evolution of the composites during the preparation process and its correlation with mechanical and electrical properties are revealed. Grain refinement and dislocation accumulation in the CuCrZr alloy matrix resulted in strength gain and a trade-off in electrical conductivity. However, precipitation of the Cr-rich phase compensates for the loss of conductivity. Directional strengthening and toughening of the composites are achieved by inducing deformation of the CuZrAl metallic glass reinforcement in the undercooled liquid region to attain its ordered arrangement. Furthermore, the electrical and mechanical properties of the crystalline phase Cu10Zr7 at the edge of metallic glass are predicted and investigated using first-principles calculations, with a focus on its impact on the performance of composites. A novel Cu-based metallic glass composites fabricated using an efficient processing approach offers valuable insights into material selection for electrical conductor applications.

Enhancing vibration damping properties of MABS/VDT blends using SEBS-g-MAH as a compatibilizer

This investigation focuses on the enhancement of the damping properties of Methyl Methacrylate Acrylonitrile Butadiene Styrene (MABS) through the formulation of a specific blend with a styrene-based elastomer referred to as VDT, and with the incorporation of Ethylene Butylene Styrene grafted Maleic Anhydride (SEBS-g-MAH) as a compatibilizer. In contrast to traditional investigations that primarily focus on the mechanical rigidity, thermal conductivity, and electrical conductivity of materials, this research explores the enhancement of damping properties via the process of melt compounding. Using a twin-screw extruder in a precise melt-mixing process, a multiphase polymer blend is generated by including three different weight ratios (10, 20, and 30 wt.%) of VDT. Furthermore, in order to enhance the compatibility between MABS and VDT, three different weight percentages of SEBS-g-MAH (2, 4, and 6 wt.%) have been used in the blend. Tensile testing, laser confocal microscopy, dynamic mechanical analysis (DMA) and nuclear magnetic resonance (NMR), are used to thoroughly assess the compatibility and effectiveness of the blends. The results indicate that the damping performance of the blend increases in direct proportion to the amount of VDT. Conversely, the addition of SEBS-g-MAH has a non-monotonic effect: the inclusion of 4 wt.% SEBS-g-MAH leads to the most substantial improvements in both damping performance and tensile strength, exceeding the results obtained with 2 wt.% and 6 wt.% compatibilizer. The study highlights the need for carefully choosing the right wt.% of compatibilizers when aiming to formulate polymer blends with enhanced vibration dampening properties.

Verification of the Electrical Impedance Method for Measuring the Humidity of Silicate Material

Measuring humidity in building materials is of great importance in assessing the condition of materials and also in building diagnostics, as the presence of humidity affects their physical and thermal insulation properties. In the construction industry, the use of non-destructive electrical measurement methods for testing the physico-chemical properties of materials is common and especially the electrical conductivity of materials is significantly affected by humidity.