Electrical Phenomena Research Articles

Behavior of Lubricated Bearings in Electric Circuits

In recent years, electrical damage phenomena in rolling and plain bearings have become increasingly important due to the growing electrification of individual mobility and renewable energy technologies [...]

Polymeric Conductive Adhesive-Based Ultrathin Epidermal Electrodes for Long-Term Monitoring of Electrophysiological Signals.

Electrophysiology, exploring vital electrical phenomena in living organisms, anticipates broader integration into daily life through wearable devices and epidermal electrodes. However, addressing the challenges of the electrode durability and motion artifacts is essential to enable continuous and long-term biopotential signal monitoring, presenting a hurdle for its seamless implementation in daily life. To address these challenges, an ultrathin polymeric conductive adhesive,poly(3,4-ethylenedioxythiophene): poly(styrenesulfonate)/polyvinyl alcohol/d-sorbitol (PPd) electrode with enhanced adhesion, stretchability, and skin conformability, is presented. The skin conformability and stability of electrodes is designed by theoretical criteria obtained by mechanical analysis.Thus, impedance stability is obtained over 1-week of daily life, and the PPd electrode addresses the challenges related to durability during prolonged usage. Proving stability in electromyography (EMG) signals during high-intensity exercise, the wireless PPd measurement system exhibits high signal-to-noise ratio (SNR) signals even in situations involving significant and repetitive skin deformation. Throughout continuous 1 week-long electrocardiogram (ECG) monitoring in daily life, the system consistently preserves signal quality, underscoring the heightened durability and applicability of the PPd measurement system.

Bidirectional energy‐controlled piezoelectric shunt damping technology and its vibration attenuation performance

AbstractPiezoelectric material‐based semi‐active vibration control systems may effectively suppress vibration amplitude without any external power supply, or even harvest electrical energy. This bidirectional electrical energy control phenomenon is theoretically introduced and validated in this paper. A flyback transformer‐based switching piezoelectric shunt circuit that can extract energy from or inject energy into piezoelectric elements is proposed. The analytical expressions of the controlled energy and the corresponding vibration attenuation are therefore derived for a classical electromechanical cantilever beam. Theoretical predictions validated by the experimental results show that the structure vibration attenuation can be tuned from −5 to −25 dB under the given electrical quality factor of the circuit and figure of merit of the electromechanical structure, and the consumed power is in the range of −13 to 25 mW, which is a good theoretical basis for the development of self‐sensing, self‐adapting, and self‐powered piezoelectric vibration control systems.

Giant magnetoresistance resulting from superzone gap in spin-frustrated rare-earth-based aluminide: DyFe2Al10.

The magnetic properties of orthorhombic aluminides have recently been the subject of investigation, revealing several intriguing phenomena within this class of materials. However, the exploration of their magnetic and electrical transport phenomena has remained somewhat limited. In this study, we delve into the magnetic and electrical transport characteristics of one such material from that group which is DyFe2Al10(DFA). Our findings go beyond classifying this material as a simple antiferromagnet; but it posses a short range ferromagnetic ordering apart from helical spin structure of Dy3+. It exhibits a metamagnetic transition and spin glass behavior below its Néel temperature (TN). Our analysis of electrical magnetotransport behavior indicates the emergence of an antiferromagnetic superzone gap, resulting in a significant enhancement in magnetoresistance effect. This discovery paves the way for a class of materials with complex interactions and notable magnetoresistance properties.

Electric field control of magnetic anisotropy and model for oriented Co/graphene design

Electric field controlled magnetic devices have attracted interest in the area of magnetic recording research, owing to their lower power consumption and high stability. While heterostructures composed of Co and carbon materials exhibit unique properties, our understanding of the magnetic properties of Co on graphene with a wavelike structure and related electric field-controlled phenomena remains limited. Here, we demonstrate the preparation of a customized Co/graphene structure, in which the controllability of the coercive force is enhanced. Taking the coercive force and geometric factor of Co into consideration, a shape-dependent magnetic anisotropy is proposed, which sufficiently explains the correlation between the coercive force and the aspect ratios of the Co stripes. For the magnetic field perpendicular to the bottom lines of canyons, the adjustment capability of the coercive force is enhanced under conditions of a more negatively charged surface. Based on the large electric field and related magnetic anisotropy energy, a ferro-ionic control (FeIC) model is proposed, which describes the relationship between the electric potential and coercive force in electrified conditions. Based on a FeIC model with a preferred orientation, we propose a design of an integrated FeIC inductor with field tunability that could strongly impact the field of integrated-circuit design, resulting in wider applications and functionalities of chips.

Study of Electrical and Dielectric Behaviors of Copper-Doped Zinc Oxide Ceramic Prepared by Spark Plasma Sintering for Electronic Device Applications.

In this study, Cu-doped ZnO aerogel nanoparticles with a 4% copper concentration (Cu4ZO) were synthesized using a sol-gel method, followed by supercritical drying and heat treatment. The subsequent fabrication of Cu4ZO ceramics through Spark Plasma Sintering (SPS) was characterized by X-ray diffraction (XRD), field-emission gun scanning electron microscopy (FE-SEM) equipped with EDS, and impedance spectroscopy (IS) across a frequency range of 100 Hz to 1 MHz and temperatures from 270 K to 370 K. The SPS-Cu4ZO sample exhibited a hexagonal wurtzite structure with an average crystallite size of approximately 229 ± 10 nm, showcasing a compact structure with discernible pores. The EDS spectrum indicates the presence of the base elements zinc and oxygen with copper like the dopant element. Remarkably, the material displayed distinct electrical properties, featuring high activation energy values of about 0.269 ± 0.021 eV. Complex impedance spectroscopy revealed the impact of temperature on electrical relaxation phenomena, with the Nyquist plot indicating semicircular arc patterns associated with grain boundaries. As temperature increased, a noticeable reduction in the radius of these arcs occurred, coupled with a shift in their center points toward the axis center, suggesting a non-Debye-type relaxation mechanism. Dielectric analyses revealed a temperature-driven evolution of losses, emphasizing the material's conductivity impact. Non-Debye-type behavior, linked to ion diffusion, sheds light on charge storage dynamics. These insights advance potential applications in electronic devices and energy storage.

Heat generating impact on radiative nanofluid flow via exponential expanding surface with convective conditions: Mesh independence examination

The current article aims to inspect existence of electrical field in magnetohydrodynamics stream of nanofluid toward nonlinear via various thicknesses of symmetric extended surface. This examination is distinctive in that it analyses influences of Joule heating, thermal radiation, and chemical reaction on heat and mass transport. Electric field and variable thickness phenomena are used to study thermophysical properties. Asymmetry technique is used to describe geometric model. Governed differential equations are changed over into dimensionless ordinary differential equations by applying similarity changes and solutions are obtained by bvp4c in MATLAB. Augmentation in velocity and temperature, together with suppression of concentration is caused by occurrence of electric field. Parameters of magnetized force, thermal radiation, and Eckert number are responsible for enhancing variations in temperature and thermal boundary layer thickness. These variations are reduced with rising Prandtl number and electric field. This research compares new findings with preexisting data in limited cases.

Scientific Instrumentation Complex for the ExoMars-2022 Landing Platform

Scientific objectives, instruments, and measurement program of the scientific instrumentation of the Kazachok stationary landing platform of the State Corporation Roscosmos and the European Space Agency (ESA) ExoMars-2022 project are presented. The scientific objectives of research on the landing platform included the long-term climate monitoring, the studies of the atmospheric composition, the mechanisms for dust lifting and related electrical phenomena, atmosphere–surface interactions, the subsurface water abundance, monitoring the radiation situation, and the study of Mars internal structure. To address these problems, 11 Russian and two European instruments with a total mass of 45 kg were built, tested and integrated into the spacecraft. These include a television camera system, meteorological complexes, a suite for studying dust and related electrical phenomena, optical spectrometers and an analytical complex for studying the atmospheric composition, a microwave radiometer, the neutron and gamma spectrometers for surface research, a seismometer, magnetometers and a Mars proper motion experiment to study its internal structure. Although the ExoMars-2022 project has been discontinued, the scientific objectives of the landing platform have not lost their relevance, and the technical solutions and developments implemented in scientific equipment are of interest and promising for further Mars exploration.

Electrical characterization of BaBi4Zr2Sn2O15 complex ferroelectric system

BaBi4Zr2Sn2O15, a modified ceramic sample belonging to the oxide family of layered ferroelectrics, is synthesized using the mixed oxide process after firing for calcination at 810 °C for 6 hrs. XRD study of the compound exhibits the growth of an orthorhombic single-phase structure at atmospheric temperature. The electrical properties of the sample are investigated in a broad temperature range (30–500 °C) and frequency range (100 Hz - 106 Hz). The dielectric properties recommend the transition from ferro to paraelectric state at 410 °C which is much more than room temperature. The impact of frequency and temperature on complex immittance parameters (impedance and modulus) are analyzed by an impedance analyzer in broad frequencies and temperature ranges. The electrical properties show; (i) the existence of semiconductor-like negative temperature coefficients of resistance behavior, (ii) evidence of electrical relaxation phenomena as a function of temperature, and (iii) the existence of single electrical relaxation ascribed to the existence of grain contribution to the electric properties.

Effect of Sb modification on dielectric and electrical properties of lithium bismuth titanate

Sb-modified alkali bismuth titanate Li0.5Bi0.5− x Sb x TiO3 (x = 0 and 0.1) compounds are prepared using the method of solid-state-reaction route. The XRD exploration in environmental conditions confirms the development of new compounds having single-phase orthorhombic crystal structures. Non-uniformly distributed grains are noticed in SEM micrographs for both compounds. The electric & dielectric behavior is analyzed by use of an impedance analyzer. The exploration of the dielectric behaviors of both compounds in a wide frequency range (100 Hz–1 MHz) & temperature range (30–500 °C) suggests that these characteristics are strongly dependent on frequency & temperature. Activation energy assessed from temperature variation of ac-conductivity in various zones recommends that the electric transport phenomenon obeys the Arrhenius equation and shows a mixed type of conductivity.

Infrared spectroscopy as a tool to study the vibrational, mechanical, and structural changes in commercial plastic bags: Physical principles

This paper investigates the application of Fourier-transform infrared (FT-IR) spectroscopy by analyzing a commercially available plastic bag as an example. The study investigates the vibrational modes, mechanical properties, and structural changes of a bare sample during a tensile test. By measuring the absorption bands and their intensities, valuable information about the chemical composition and the concentration of certain components in the plastic bag is obtained. The behavior of vibrational modes in one, two, and three-dimensional systems is studied, with a focus on their representation in the IR spectrum. The concept of the dipolar electric moment and phenomena such as overtone bands and Fermi resonance are also explained. The X-ray patterns of the bag show talc and polyethylene crystalline phases. Scanning electron microscopy (SEM) determines the thickness of the sample. Tensile tests are performed to investigate the mechanical behavior of the plastic bags. This study demonstrates the informative and educational capabilities of FT-IR spectroscopy in studying the vibrational, mechanical, and structural properties of materials, with an emphasis on the correct application of this technique. The study highlights the importance of considering the effects of thickness and absorption coefficient and applying the Beer-Lambert law to understand the changes in vibrational modes during tensile testing. The results contribute to a deeper understanding of the structural behavior of plastic bags and demonstrate the effectiveness of FT-IR spectroscopy in characterizing such materials.

P‐N Junction‐Driven Abnormal Electric Field Distribution in the Degraded Multilayer Ceramic Capacitors

Local electric field distribution in the dielectric layer of BaTiO3‐based multilayer ceramic capacitors (MLCCs) is investigated by Kelvin probe force microscopy before and after highly accelerated life test (HALT) degradation combined with the energy band diagram. An unusual electric field concentration phenomenon is directly visualized near the HALT cathode region in the degraded MLCCs while a reverse voltage is applied. Such abnormal behavior is ascribed to the migration of oxygen vacancies within the dielectric layer during the HALT, leading to the formation of a P‐N junction structure and further a heightened barrier under a reverse bias. As a result, a P‐N junctional model is proposed for understanding local failure mechanism of the degraded MLCCs, which enrich the insights into the insulation resistance degradation and the reliability of MLCCs.

A Categorization of the Global Fair-weather Electric Field According to Position and Weather Conditions

Atmospheric electricity is an important branch of physics, which mainly studies various electrical phenomena occurring in the atmosphere and the action process of various parameters in the atmosphere. This paper categorizes and integrates research literature based on different spaces and weather conditions. It focuses on analyzing specific regions and meteorological activities and obtains important conclusions. There is a certain correlation between atmospheric electric field and geological conditions, aerosol concentration, and atmospheric particle concentration, among other influencing factors. The significance of studying atmospheric electricity is to improve people’s understanding of the charge distribution in the atmosphere and related electrical phenomena, help people better protect the environment, improve the quality of life, and lay the foundation for future scientific and technological development. This paper helps people understand the impact of changes in atmospheric electric fields on the atmospheric environmental system and monitor air quality through the characteristics of atmospheric electric fields, thereby improving technology in related fields.

Investigation of enhancing EDM machining performance of INCONEL alloy using composite electrodes

In this research, an attempt was made to reinforce aluminium with graphite particles and use it as a tool material with the objective of combining the properties of aluminium and graphite. The micrograph confirms that the graphite particles were uniformly distributed over the aluminium matrix, density reduces and thermal conductivity increases with the addition of graphite particles. Material Removal Rate (MRR) peaks at 12 A current before declining due to plasma channel expansion, an optimal Ton of 8 μs ws observed, with 4 μs Toff yielding higher MRR. Copper electrodes excel due to thermal conductivity, while 5% graphite in aluminum boosts MRR to 31.89 mm3 min−1, additional graphite decreases MRR. TWR rises with shorter Toff until 6 μs, then decreases. Gap control impacts TWR, with lower spark gaps causing higher TWR due to intense material removal, and higher gaps leading to increased TWR due to incomplete flushing. Copper electrodes have the lowest TWR due to their high melting temperature. The addition of graphite in aluminum reduces TWR at low currents but is less effective at higher currents. Surface roughness (Ra) decreases with higher current, reaching a minimum of 7.02 μm at 12 A. Optimal Ton is 8 μs (7.56 μm), while shorter Toff at 4 μs and a 3 mm gap yield the best Ra of 7.36 μm with A4 composite tool. Copper electrodes result in higher Ra at higher currents, while graphite in aluminum improves surface quality, especially at 5% content. Arcing, an undesirable electrical discharge phenomenon in EDM, adversely affects machining. Experiments revealed a strong correlation between high duty cycles, duty ratios, and arcing propensity, with composite tools being more susceptible due to their variable conductivity. In contrast, non-composite tools, exemplified by copper, withstand higher duty ratios without arcing.

Investigation of conduction mechanisms and permittivity-conductivity correlation in a Gd-based perovskite structure.

Currently, the development of perovskites has required a lot of attention for fundamental investigation and electronic devices. The present study reported the electrical conductivity and the dielectric properties of a GdCa2Cu3Oδ (GdCaCuO) system prepared via the solid-state reaction method. The X-ray diffraction results indicate that GdCaCuO crystallizes in the tetragonal perovskite structure. The studied compound reveals elevated dielectric permittivity and significant electrical phenomena including the influence of multiple conduction and relaxation mechanisms on the transport of charges. From the impedance results, it is observed that the electrical and dielectric properties of the studied compound are governed by the contribution of the grain and the grain boundary regions. The Nyquist results and the blocking factor (αR) were used to confirm the aforementioned properties. From the modulus results, we confirm again the presence of multiple relaxation processes and various types of polarization effects. The semiconductor character of the GdCaCuO ceramic is due to the activation of hopping conduction processes within the DC regime. Consequently, both the variable range hopping and the small polaron hopping models are used at low- and high-temperature ranges, respectively. At various temperatures, the conductivity spectra of the GdCaCuO ceramic conform to the double Jonscher power law. The power law behavior is attributed to the activation of hopping and tunneling conduction mechanisms. The presence of large dielectric dispersion in GdCaCuO is observed at low temperatures and decreases rapidly against increasing temperatures.

An Efficient Electrothermal Model of a Thermoelectric Converter for a Thermal Energy Harvesting Process Simulation and Electronic Circuits Powering

This paper deals with an electrothermal model of a thermoelectric converter dedicated to performing simulations of coupled thermal and electrical phenomena taking place in harvesting processes. The proposed model is used to estimate the electrical energy gain from waste heat that would be sufficient to supply electronic circuits, in particular autonomous battery-less nodes of wireless sensor networks (WSN) and Internet of Things (IoT) devices. The developed model is not limited to low-power electronic solutions such as WSN or IoT; it can also be scaled up and applied to simulations of considerably higher thermal power conversion. In this paper, a few practical case studies are presented that show the feasibility and suitability of the proposed model for complex simultaneous simulation processes in both the electrical and thermal domains. The first example deals with a combined simulation of the electrothermal model of a thermoelectric generator (TEG) and an electronic harvester circuit based on Analog Devices’ power management integrated circuit LTC3108. The second example relates to the thermalization effect in heat sink-less harvesting applications that could be mitigated by a pulse mode operation. The unique contribution and advancement of the model is the hierarchical structure for scaling up and down, incorporating the complexity of the Seebeck effect, the Joule effect, heat conduction, as well as the temperature dependence of the used materials and the thermoelectric pellet geometries. The simulations can be performed in steady as well as transient states under changing electrical loads and temperatures.

Modulating selective ionic enrichment and depletion zones in straight nanochannels via the interplay of surface charge modulation and electric field mediated fluid-thickening.

We report the possibilities of achieving highly controlled segregation of ion-enriched and ion-depleted regions in straight nanochannels. This is achieved via harnessing the interplay of an axial gradient of the induced transverse electric field on account of electrical double layer phenomenon and the localized thickening of the fluid because of intensified electric fields due to the large spatial gradients of the electrical potential in extreme confinements. By considering alternate surface patches of different charge densities over pre-designed axial spans, we illustrate how these effects can be exploited to realize selectively ion-enriched and ion-depleted zones. Physically, this is attributed to setting up of an axial concentration gradient that delves on the ionic advection due to the combined effect of an externally applied electric field and induced back-pressure gradient along the channel axis and electro-migration due to the combinatorial influences of the applied and the induced electrostatic fields. With an explicit handle on the pertinent parameters, our results offer insights on the possible means of imposing delicate controls on the solute-enrichment and depletion phenomena, a paradigm that remained unexplored thus far.

Electrochemical Deposition in Vertical Tubes : An Hydrodynamic and Mass Transfer Study

The present work is part of the research project NXCHROME led by IRT M2P. It concerns the chemical engineering of metallic hard chromium coatings on internal surface of large tubular parts. These parts are intended to be used in several sectors of activity (aeronautics, armament, energy...). Thus, taking into account severe specifications related to these applications, the parts will be very strongly solicited thermomechanically during their use, which requested high performances to increase substrate's life. In the current process, tubes are treated vertically, by electrodeposition from a hexavalent chromium salt based (chromic acid) electrolyte. These electrolytes have the advantage of being efficient, easy to use, with well known functions. However, they have a low faradic yield (<20%), leading to an important production of bubbles (cathodic and anodic).These bubbles create the fluid motion, and eventually govern hydrodynamic, liquid flow and mass transfer of the species in the tube.It is important to note that the use of CrVI salts has been prohibited since 2017 (except for authorizations for applications without alternatives) by the European regulation REACh (Registration, Evaluation, Authorization and restriction of Chemicals). Indeed, hexavalent chromium is classified in Appendix XIV among SVHC (substances of very high concern), due to its high toxicity (CMR compound : Carcinogenic, Mutagenic and Reprotoxic) and the high danger it represents for coworkers using this compound. The objective of NXCHROME is to find a alternative process with a "REACh compatible" electrolyte based on an innovative trivalent chromium. The modus operandi and the electrochemical mechanisms involved are completely different and less well known, compared to the former electrolyte. Nevertheless, it keeps this low faradic yield and the liquid agitation mode in tubular parts will remains identical.Nevertheless, this change is a good opportunity for a deep investigation in the "bubble induced hydrodynamic" which occurs during plating time, and to collect all reliable information on fluids behavior. Then, two main research axis have been considered. The first one is done via the numerical simulation of the secondary current distribution, i.e. taking into account the electrical phenomena in the electrolyte (ohmic drop), the geometry of the system and the kinetics of the electrochemical reactions. This part is in collaboration with HIVELIX company. The second one trhought the design and elaboration of a large size experimental set-up in stainless steel and PMMA (φ = 40mm, L = 3000mm) Figure 1. This ste-up includes electrochemically active cathode parts (production of bubbles by hydrolysis), and transparent parts (windows of observations of the bubbles, according to the height of the tube). As it is the bubble production which puts in movement the fluid with their vertical displacement towards the surface, informations on their size and behavior are of primary importance. Their speed is determined by their size (depending on the distance covered and the coalescence) and the liquid physical properties.To mimic the chromium electrolyte, a transparent saline solution has been chosen and prepared by adjusting its parameters to be identical to the industrial electrolyte (viscosity, conductivity...), while allowing bubble production on the central electrode surface.Data collection and order of magnitude are done by various means, namely flow rate measurements, gas retention within the liquid and high frequency camera shots (bubble size, bubble velocity, coalescence...). Figure 1

Nonlinear electrical transport phenomena as fingerprints of a topological phase transition in ZrTe5

Topological phase transitions, influenced by magnetic fields, dopants, pressure, and temperature, create Berry curvature in band structures, challenging to detect due to resolution and scattering issues in spectroscopy and transport. Here, we propose nonlinear electrical transport phenomena as fingerprints of a topological phase transition in ZrTe5 under magnetic fields. Both a nonlinear longitudinal conductivity ΔσL in a magnetic-field-aligned electric field and a third-order nonlinear Hall (transverse) conductivity Δσxy in a magnetic-field-perpendicular electric field arise below a characteristic temperature T*. The sensitivity of nonlinear transport to the band topology allows the detection of a subtle change in the band topology hidden in linear transport coefficients. Extending the previous scaling theory between linear transport coefficients (σxx and σxy), we also propose scaling relations for both linear (σxx and σxy) and nonlinear (ΔσL and Δσxy) transport coefficients. These scaling relations will help understand the interplay between the mechanisms of nonlinear transport coefficients and the influence of Berry curvature.

Biological dispersion in the time domain using finite element method software

Biological tissue exhibits a strong dielectric dispersion from DC to GHz. Implementing biological dispersion in the time domain with commercial finite element method software could help improve engineering analysis of electrical transient phenomena. This article describes the steps required to implement time-domain biological dispersion with commercial finite element method software. The study begins with the presentation of a genetic algorithm to fit the experimental dispersion curve of Solanum tuberosum (potato tuber) to multipoles of first-order Debye dispersion. The results show that it is possible to represent the biological dispersion of S. tuberosum from 40 Hz to 10 MHz in a 4-pole Debye dispersion. Then, a set of auxiliary differential equations is used to transform the multipole Debye dispersion from the frequency domain to the time domain. The equations are implemented in the commercial software COMSOL Multiphysics. A comparison between the frequency and time domain simulations was used to validate the method. An analysis of the electric current with square-wave pulsed voltage was performed. We found that the computer implementation proposed in this work can describe the biological dispersion and predict the electric current.