Interaction Of Electric Field Research Articles

Design insights into a junctionless nanosheet FET (JL-NSFET) for switching and Analog/RF applications: Device to circuit level assessment

- The advent in semiconductor technology paved the way for electronic industry to place in front row. The nanosheet (NS) device is a type gate all around (GAA) architecture provides an excellent gate electrostatic to suppress the short channel effects (SCEs) and scale it further below sub-7nm technology node. This paper provides a complete design insight from device to circuit of a two sheet NSFET with geometrical variations. All digital and analog/RF parameters are extracted and analyzed based on gate length (LG), sheet thickness (TNS), sheet width (WNS), and spacer material variations. As LG is varied from 8 nm to 12 nm, ION/IOFF is enhanced from 0.249 × 108 to 2.86 × 108 due to improved gate control over the channel region which is also reflected in DIBL to 40.82 % whereas, at lower LG analog/RF metrics are better. The TNS play a vital role in device characteristics, as TNS decreases the chance of interaction of electric field from source to drain decreases owing to full volume conduction and thereby ameliorated performance of JL NSFET. As TNS is varied from 7 nm to 5 nm, all electrical characteristics are improved and analog/RF parameters gm, Av, fT, TFP and GTFP are improved to 10.3 %, 18.4 %, 12.1 % 18.5 % and 54.04 %, respectively. Increase in WNS from 10 nm to 20 nm results into increased effective width of a device, it leads to higher ION current which further impacts on electrical and analog/RF parameters. The DIBL, gm, fT, GFP, TFP and GTFP are enhanced to 63.7 %, 37.9 %, 34.9 %, 9.7 %, 33.5 %, 9.1 %, respectively. The spacer materials are varying from Al2O3 (k = 18), HfO2 (k = 22), ZrO2 (k = 25) to TiO2 (k = 44), the electrical characteristics are better at higher-k whereas analog/RF performances are superior at lower-k. Further, digital circuit elements NOT, NAND and NOR gates are designed, simulated and the delays are examined as 4.25ps, 6.45ps and 5.12ps, respectively. The NML and NMH of NOT gate are noticed as 295 mV and 280 mV at 0.7 V of supply voltage. Furthermore, a common source (CS) amplifier is also simulated and gain of 3.3 is noticed. The aforementioned analysis revels the JL NSFET is best suitable candidate for future nanoscale applications.

Theoretical investigation of the giant magnetocaloric effect in Er0.7Tm0.3Al2

This study presents a theoretical investigation of the giant magnetocaloric effect recently reported in the intermetallic compound Er0.7Tm0.3Al2. Our model Hamiltonian includes the crystalline electrical field, exchange, and Zeeman interactions in both Er3+ and Tm3+ sublattices. A remarkable agreement was achieved between the theoretical calculations and experimental data concerning heat capacity, ΔST and ΔTad (magnetocaloric quantities). Additionally, the analysis of magnetic anisotropy and simulations for the rotating magnetocaloric effect in Er0. 7Tm0.3Al2 were performed. The maximum value for the rotating magnetocaloric effect was predicted around the temperature of spin reorientation transition from the <111>-easy to the <001>-hard magnetization directions.

An Exact Expression for Multidimensional Spectroscopy of a Spin‐Boson Hamiltonian

AbstractMultidimensional coherent spectroscopy is a powerful tool to characterize nonlinear optical response functions. Typically, multidimensional spectra are interpreted via a perturbative framework that straightforwardly provides intuition into the density matrix dynamics that give rise to specific spectral features. When the goal is to characterize system coupling to a thermal bath however, the perturbative formalism becomes unwieldy and yields less intuition. Here, an approach developed by Vagov et al. is extended to provide an exact expression for multidimensional spectra of a spin‐boson Hamiltonian up to arbitrary order of electric field interaction. The utility of this expression is demonstrated by modeling polaron formation and coherent exciton‐phonon coupling in quantum dots, which strongly agree with experiment.

Fundamental study of the interactions of electric fields and polystyrene beads for enabling pump-less particle handling within microfluidics devices

Fundamental study of the interactions of electric fields and polystyrene beads for enabling pump-less particle handling within microfluidics devices

Combined effect of rashba spin-orbit interaction, hydrostatic pressure and temperature on energy dispersion based ballistic conductance of InAs tunnel-coupled (double) quantum wire under exterior magnetic and electric field

In this work the change in energy dispersion curve and ballistic conductance for InAs tunnel-coupled double quantum wire (DQWR) under the influence of the external magnetic field, electric field, hydrostatic pressure, temperature, and Rashba spin-orbit interaction (SOI) are studied theoretically in detail. A constant magnetic field transverse to the fundamental plane is applied to the DQWR. The Landuer-Büttiker formalism is used to determine the transport characteristics, and the energy eigenvectors and eigenvalues are derived within the parameters of the diagonalization approach. The numerical results indicate that the energy spectra of the system are influenced by external factors such as magnetic field, electric field, temperature, hydrostatic pressure, and Rashba SOI, resulting in variations in lateral/vertical and downward/upward shifts. These factors also cause oscillatory patterns in ballistic conductance due to the oddity of energy subbands. These results have significant implications for the advancement of double-quantum wire-based devices.

IRREVERSIBLE ELECTROPORATION FOR CANCER TREATMENT: A REVIEW

Introduction: Prostate, pancreatic and liver cancers are a major cause of death in Europe and including Bulgaria. Some methods for treatment include the use of electric current to create pores in the cells' membranes, and can be used in combination with other techniques, while an electric field with enough strength causes irreversible electroporation (IRE) and is a separate technique. Material and methods:Search was conducted for scientific articles about electroporation and IRE. Results: Most important parameters reported in scientific articles are electric field distribution, tissue characteristics and interaction, electric pulse settings. Articles that report patient outcomes suggest several possible advantages of – retaining urinary and sexual functions, possible increase of overall survival rate, low rate of serious adverse events and promising results when applied with chemotherapy. However, there are some studies that do not corroborate these results. The technique is also used for the treatment of renal cancer, and there are researches indicating a potential for use in ovarian, cervical and breast cancer. Conclusion: Studies suggest the IRE method is safe and feasible for the treatment of prostate cancer, pancreatic cancer and liver cancer, but improvements in the protocols is needed to prevent a decrease of quality of life.

Tuning the spin transport properties of phosphorene superlattice under a uniform electric field and Rashba spin-orbit interaction

The spin-interdependent transport features for phosphorene superlattice, containing spin-flip and spin polarization are described under a constant electric field and extrinsic Rashba spin-orbit interaction utilizing the transfer matrix method. Our findings demonstrated the number of barriers at this structure acts the prominent role at the spin polarization and transmission probability, that can be applied in modeling optimum spintronic apparatus. Interestingly, the best outcomes for the transmission probability and spin polarization transpired in the five obstacles. Furthermore, an incoming electron with spin-up (down) can be transferred as an electron with spin-down (up) by adjusting the bias voltage and Rashba strength. Our findings can be utilized to create new nanostructures and maximize the performance of spintronic systems based on phosphorene nanoribbons.

Study on the effect of magnetic field on electrodeposition of NiCr alloy coating

Different NiCr coatings are prepared by magnetic field assisted electrodeposition on the surface of Q235B substrate. The influence of magnetic field intensity on thickness, surface roughness, hardness, surface morphology, composition, and corrosion resistance of NiCr coating is studied. The Lorentz force generated by the interaction of magnetic field and electric field will produce magnetohydrodynamic (MHD) phenomena near cathode surface to improve ions transfer rate and reduce the surface roughness, resulting in the increase of thickness and hardness. The electrodeposited NiCr coatings all show granular surface morphology. The metal cellular protrusions on the surface of NiCr coating prepared without magnetic field are nonuniform and agglomerated. The applied magnetic field is beneficial to refine the metal cellular protrusions and increase the chromium content in the NiCr coating, resulting in the enhancement of corrosion resistance. The NiCr coating obtained at the condition of 1T magnetic field has the largest thickness and the best corrosion resistance. However, when the magnetic field is increased to 1.5T, the chromium content in CoNi coating is reduced due to severe hydrogen evolution, resulting in the decrease of hardness and corrosion resistance.

Analysis of metamagnetic transitions in antiferromagnetic arrangements in the RRhIn5 (R[dbnd]Nd, Tb, Dy, and Ho) series using a four sublattice model

The RRhIn5 (RNd, Tb, Dy, and Ho) series of compounds crystallizes in the Ho2CoGa8 tetragonal type-structure, with P4/mmm space group. A Hamiltonian model of four magnetic sublattices is used to reproduce the metamagnetic transitions of these series, considering the crystalline electric field interaction and the exchange interaction in the molecular field approximation. The crystalline electric field parameters were extracted from literature sources, while the exchange parameters were adjusted to optimize the agreement between the proposed model and the experimental data. The four sublattice model presented here successfully describes the metamagnetic transitions that appeared, at the low magnetic fields, in the RRhIn5 (RNd, Tb, Dy, and Ho) series, in contrast to other molecular field model found in the literature that inadequately reproduces these transitions.

Theoretical investigation of magnetic and thermal properties in Dy1−x Sc x Ni2 series

We report on the thermal and magnetic properties of Dy1−xScxNi2 series compounds (x=0.1,0.3,0.5,and0.7), which were investigated through a model Hamiltonian including the exchange, Zeeman, and crystalline electric field interactions. We investigated the effect of Sc substitution on the Dy site on the magnetic and magnetocaloric properties of these compounds. Theoretical results were simulated for heat capacity, entropy, and the magnetocaloric effect quantities. Our model reproduced the decrease of the magnetic ordering temperature and of the isothermal entropy change peaks as Sc concentration increases. Our theoretical results were confronted with experimental data from the literature, showing good agreement.

Deformation transients of confined droplets within interacting electric and magnetic field environment

A theoretical exploration and an analytical model for the electro-magneto-hydrodynamics (EMHD) of leaky dielectric liquid droplets suspended in an immiscible confined fluid domain have been presented. The analytical solution for the system, under small deformation approximation in the creeping flow regime, has been put forward. The study of droplet deformation suggests that its temporal evolution is exponential and dependent on the electric and magnetic field interaction. Furthermore, the direction of the applied magnetic field relative to the electric field determines whether the magnetic force opposes or facilitates the interfacial net electrical force caused by the electric field. Validation of the proposed model at the asymptotic limits of vanishing magnetic field shows that the model accurately reduces to the case of the transient electrohydrodynamic model. We also propose a magnetic discriminating function (ϕM) to quantify the steady-state droplet deformation in the presence of interacting electric and magnetic fields. The change of droplets from a spherical shape to prolate and oblate spheroids corresponds to ϕM&amp;gt; 0 and &amp;lt; 0 regimes, respectively. It is shown that a substantial augmentation in the deformation parameter and the associated EMHD circulation within and around the droplet is achieved when aided by a low-magnitude magnetic field. The analysis also reveals the deformation lag and specific critical parameters that aid or suppress this lag behavior, discussed in terms of relevant non-dimensional parameters.

Contributions of deep learning to automated numerical modelling of the interaction of electric fields and cartilage tissue based on 3D images.

Electric fields find use in tissue engineering but also in sensor applications besides the broad classical application range. Accurate numerical models of electrical stimulation devices can pave the way for effective therapies in cartilage regeneration. To this end, the dielectric properties of the electrically stimulated tissue have to be known. However, knowledge of the dielectric properties is scarce. Electric field-based methods such as impedance spectroscopy enable determining the dielectric properties of tissue samples. To develop a detailed understanding of the interaction of the employed electric fields and the tissue, fine-grained numerical models based on tissue-specific 3D geometries are considered. A crucial ingredient in this approach is the automated generation of numerical models from biomedical images. In this work, we explore classical and artificial intelligence methods for volumetric image segmentation to generate model geometries. We find that deep learning, in particular the StarDist algorithm, permits fast and automatic model geometry and discretisation generation once a sufficient amount of training data is available. Our results suggest that already a small number of 3D images (23 images) is sufficient to achieve 80% accuracy on the test data. The proposed method enables the creation of high-quality meshes without the need for computer-aided design geometry post-processing. Particularly, the computational time for the geometrical model creation was reduced by half. Uncertainty quantification as well as a direct comparison between the deep learning and the classical approach reveal that the numerical results mainly depend on the cell volume. This result motivates further research into impedance sensors for tissue characterisation. The presented approach can significantly improve the accuracy and computational speed of image-based models of electrical stimulation for tissue engineering applications.

Two-Dimensional Terahertz Spectroscopy of Nonlinear Phononics in the Topological Insulator MnBi_{2}Te_{4}.

The interaction of a single-cycle terahertz electric field with the topological insulator MnBi_{2}Te_{4} triggers strongly anharmonic lattice dynamics, promoting fully coherent energy transfer between the otherwise noninteracting Raman-active E_{g} and infrared (IR)-active E_{u} phononic modes. Two-dimensional terahertz spectroscopy combined with modeling based on the classical equations of motion and symmetry analysis reveals the multistage process underlying the excitation of the Raman-active E_{g} phonon. In this nonlinear combined photophononic process, the terahertz electric field first prepares a coherent IR-active E_{u} phononic state and subsequently interacts with this state to efficiently excite the E_{g} phonon.

Effects of the Changes of Particle Surface Electric Field and Interaction Force on the Reclaimed Soil Aggregate Structural Stability under the Application of Different Soil Conditioners

Aggregate stability is a key factor in the evaluation of soil structure and erosion resistance, which is largely influenced by soil electric field and particle interaction. However, there are few studies on how different organic and inorganic soil conditioners change the surface electric field and interaction force of reclaimed soil to improve the aggregate stability. Therefore, a five-year field experiment was conducted to quantitatively study the effects of FeSO4 (TM), organic fertilizer (TO), fly ash (TF), maturing agent + organic fertilizer (TMO) and fly ash + organic fertilizer (TFO), compared with control (CK) treatment, on the reclaimed soil internal force and the aggregate crushing strength. The results showed that the reclaimed soil surface potential and electric field intensity increased after 5 years of application of organic and inorganic soil conditioners. Under the same electrolyte concentration and electric field conditions, the crushing strength of aggregates (&lt;5 μm) treated with TFO, TMO, TO, TF and TM decreased by 43.70%, 35.51%, 25.97%, 8.28% and 5.49%, respectively, compared with the control treatment, and the combination of organic and inorganic treatment (TFO and TMO) had a better effect on improving the aggregate crushing resistance. With the application of soil conditioners, the reclaimed soil DLVO force and net resultant force gradually decreased, and the order of magnitude was TFO &lt; TMO &lt; TO &lt; TF &lt; TM &lt; CK, indicating that the application of organic and inorganic soil conditioners enhanced the van der Waals attractive force and net attractive force between reclaimed soil particles, and reduced the net repulsive force between particles. The theoretical calculation results of the reclaimed soil internal force well explain the experimental results of aggregate stability against crushing, and the relationship between aggregate crushing strength and net resultant force is exponential (p &lt; 0.01). Generally speaking, the soil conditioners increase the net attractive force between particles, reduce the possibility of violent crushing of aggregates due to the increase of electric field intensity and improve the aggregate structural stability, among which the combined application of organic and inorganic soil conditioners has a better improvement effect. The results of this study will lay a theoretical foundation for clarifying the improvement of different soil conditioners on the reclaimed soil structural stability and erosion resistance.

Vibration Scale Model of a Converter Transformer Based on the Finite Element and Similarity Principle and Its Preparation

A similarity criterion suitable for studying the vibration characteristics of converter transformers is proposed based on comprehensive consideration of geometric dimensions, electric field, magnetic field, force field, sound field, and coupling field interface interactions. By comparing the magnetic field, stress, displacement, sound field distribution, and vibration characteristics of the scale model of the converter transformer with the initial model, the reliability of the similarity criterion was determined. Based on the vibration similarity criterion of the converter transformer, a prototype of the proportional model was designed and manufactured, and vibration signals under no-load and load conditions were tested. These signals correspond to the vibration signals of the iron core and winding in the finite element model, respectively. Through comparative analysis, the reliability of the prototype and the vibration similarity model of the converter transformer has been proven, which can provide an accurate and effective laboratory research platform for in-depth research on the vibration and noise of the converter transformer and equipment protection.

In Situ Passivation of Two‐Dimensional Perovskites by External Electric Field

AbstractThe outstanding performance of halide perovskite makes it one of the champion materials for applications in optoelectronic devices. However, the stability of perovskites limits their practical applications. Among all the factors influencing the stability of perovskites, defects are one of the key factors. Till now, many chemical methods have been proposed to passivate defects. Nevertheless, there is still a lack of in situ passivation methods without the change of the composition of perovskites. Here, it is found that the external electric field can passivate the defects in FPEA2PbI4 (FPEAI = 2‐(4‐Fluorophenyl)ethylamine Hydroiodide) film in a capacitive device at 78 K, and the PL intensity can be enhanced greatly. A “charge‐soaking effect” can be observed, that is PL intensity continues to increase for a long time after removing the electric field. Besides the emission peak from free exciton, two other peaks at the lower energy side from defect‐bound excitons are observed. They are more susceptible to the external electric field than the free exciton. This work will deepen the understanding of exciton behavior and the interaction of electric field with excitons in two–dimensional (2D) hybrid perovskites for efficient light–emitting diodes (LEDs) and electrically pumped lasers. It provides a new in situ passivation method of perovskites for practical applications.

Modeling Electrodynamic Interactions in Brownian Dynamics Simulations

There is a great deal of interest in interactions between biomolecules and high frequency electromagnetic (EM) fields. To investigate these interactions, a variety of simulation methods are available. For small length and time scales (approximately <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"><tex-math notation="LaTeX">$&lt; $</tex-math></inline-formula> <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"><tex-math notation="LaTeX">$1 \,\mathrm{\mu }\mathrm{s}$</tex-math></inline-formula> and <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"><tex-math notation="LaTeX">$100 \,\mathrm{n}\mathrm{m}$</tex-math></inline-formula> ), All-Atom Molecular Dynamics simulates every atom in the system. This captures the relevant physics to a high degree of accuracy. Phenomena such as electric field screening by counter-ions are emergent properties from the collective interactions of these atoms. For larger systems on longer time scales, however, this method is too computationally expensive. To reduce complexity, other simulation techniques such as Brownian Dynamics treat the solvent as a continuum, instead of explicitly. One typical assumption is that electric field interactions are electrostatic and subjected to Debye screening. Once charges start moving at high frequencies and velocities, however, charges are able to outrun the counter-ion cloud and this assumption breaks down. We propose a method of removing the electrostatic assumption without explicitly modeling the solvent or imposing a grid on the simulation. We demonstrate the charged wake can be modeled using a finite trail of charges. Interactions can be computed using electrostatic expressions only, but still capture electrodynamics.

Parametric excitation of plane waves and traveling nonlinear surface charge structures by an oscillating electric field at the plasma boundary

With the help of a single equation, to which it was possible to reduce the original system of equations, it turned out to be possible to describe the excitation of parametric instability on plane surface waves in an alternating electric field, its saturation due to the nonlinearity of the surface charge and the generation of nonlinear structures of this charge propagating along the boundary and depending on the parameters of external influence. The amplitude of saturation of the increasing plane waves was found as a result of stabilization of parametric instability by the nonlinear effect of the surface charge. An example of a nonlinear wave structure propagating along the surface of the boundary as a result of the interaction of an external electric field with a nonlinear surface charge is presented.

Effect of Zn atomic diffusion due to pulsed electric field treatment on the thermoelectric properties of Zn–Sb films

Zn4Sb3 has brought into sharp focus by its low cost and excellent thermoelectric (TE) properties in the medium temperature range. Zn atoms can diffuse in the Zn4Sb3 matrix under the treatment of temperature or current. This provides a way to control its TE performance. In this study, the TE properties of the Zn4Sb3 films were improved by the Zn atomic diffusion under the treatment of periodic pulsed electric field. The Zn atomic diffusion is caused by the electrostatic interaction of the pulsed electric field and the diffusion mode is related to the pulse period. When the pulse period is smaller than 10 s, the interstitial Zn atom diffuses first. The Zn vacancy increases, leading to the increase of the carrier concentration and the decrease of the resistivity. When the pulse period increases to 100 s, more Zn(1) atoms diffuse through the interstitial position, resulting in a small amount of ZnSb phase. Thereby in the Zn4Sb3 films, the carrier concentration decreases and the Seebeck coefficient increases. This kind of the synergistic effect decreases the resistivity and increases the Seebeck coefficient. The power factor of the Zn4Sb3 films treated with a pulse period of 100 s is more than 4500 μW m−1 K−2 in the range of 373 K–573 K. This study presents a new method to control atomic diffusion by periodic pulsed electric field, and the TE properties of the Zn4Sb3 films are improved.

Theoretical investigation of the barocaloric effect in spin-crossover systems upon first- and second-order phase transition conversion

We report a theoretical simulation of the barocaloric effect in spin crossover systems starting from a model Hamiltonian, which includes the crystalline electrical field, elastic, and phonon interactions. A systematic study, through the model parameters, allowed the construction of phase diagrams, and the contributions of configurational, magnetic, and phonon entropies for the barocaloric effect were investigated. The majority contribution comes from the phonons (about 76%, in our simulation), which were associated with the large cell volume change during the low-spin-(SL) ↔ high-spin-(HS) phase transition. Besides, the refrigerant capacity due to the barocaloric effect was discussed in the first- and second-order (LS) ↔ (HS) phase transition regimes. We find out that when hysteresis increases, with an increase in pressure, a higher barocaloric effect can be obtained.