El Pilar Fault Research Articles

Strain Partitioning and Interseismic Fault Behavior Along the Caribbean‐South American Transform Plate Boundary

AbstractWe combine Global Positioning System and Interferometric Synthetic Aperture Radar (InSAR) data to characterize the interseismic behavior (i.e., locked or creeping), and strain partitioning for the faults along the Caribbean‐South American transform plate boundary. Interseismic strain is distributed mainly on three faults, the San Sebastian, El Pilar, and Central Range faults, but partitioning occurs across multiple faults in the west (San Sebastian and La Victoria faults) and east (Sub‐Tobago Terrane, Central Range, and South Coast faults). In northern Venezuela, slip is partitioned on the San Sebastian (16.4 ± 1.7 mm/yr) and La Victoria (4.3 ± 0.9 mm/yr) faults. In north‐eastern Venezuela, the El Pilar fault accommodates slip at a rate of 18.6 ± 1.8 mm/yr. In Trinidad and Tobago, slip is partitioned between the Sub‐Tobago Terrane (3.0 ± 0.1 mm/yr), Central Range (14.5 ± 2.0 mm/yr), and South Coast (3.0 ± 0.1 mm/yr) faults. The La Victoria, San Sebastian, the western El Pilar segment, and Sub‐Tobago Terrane faults are locked to depths of 16.2 ± 4.0 km, 7.7 ± 5.2 km, 6.7 ± 2.8 km, and 8.0 ± 0.2 km, respectively. The eastern segment of the El Pilar, the Central Range, and the South Coast faults all creep. Our new InSAR results indicate that the entire Central Range Fault is creeping. The locked western segment of this transform plate boundary is capable of producing a Mw 8 earthquake, which is a significant finding regarding seismic hazard and risk.

Strain calculations of active tectonic blocks in northeastern Venezuela from GNSS analysis

We study translation, rotation, and strain of active tectonic blocks in Northeastern Venezuela from the Global Navigation Satellite System (GNSS) observations. Since the installation of the geodetic network in 2003, one of the goals was to place at least three observation sites at each tectonic block to study the deformation of each one. Based on this premise, we define at least seven blocks: Bergantín and Caripe blocks south of the El Pilar Fault (EPF), and Cariaco Gulf, Land bridge, Paria, North Peninsula, and Margarita Island blocks north of the EPF. Our preferred block modeling shows angular rotations from 0.02 to 0.29° Ma−1. It is known that the EPF concentrates the active deformation in this region of the Caribbean-South American plate boundary. However, the existent rotation could accommodate part of the motion. The strain rate tensors (SRT) indicate NW-SE compression and NE-SW extension for the western blocks. To the east, the 4-Land bridge block keeps the NW-SE compression but shows a decrease in the extensional component. The 5-Paria blocks show a complete inversion in the sense of semi-axis. Additionally, we evaluate the possibility of different motions in Margarita block calculating translational vector, rotational velocity, and strain from three GNSS sites at each side thereof. Our results show remarkable similarities for the Macanao Peninsula and Eastern Margarita Island, pointing to both belonging to a single block.

Spatial and temporal variations in creep rate along the El Pilar fault at the Caribbean‐South American plate boundary (Venezuela), from InSAR

AbstractIn eastern Venezuela, the Caribbean‐South American plate boundary follows the El Pilar fault system. Previous studies based on three GPS campaigns (2003–2005–2013) demonstrated that the El Pilar fault accommodates the whole relative displacement between the two tectonic plates (20 mm/yr) and proposed that 50–60% of the slip is aseismic. In order to quantify the possible variations of the aseismic creep in time and space, we conducted an interferometric synthetic aperture radar (InSAR) time series analysis, using the (NSBAS) New Small BAseline Subset method, on 18 images from the Advanced Land Observing Satellite (ALOS‐1) satellite spanning the 2007–2011 period. During this 3.5 year period, InSAR observations show that aseismic slip decreases eastward along the fault: the creep rate of the western segment reaches 25.3 ± 9.4 mm/yr on average, compared to 13.4 ± 6.9 mm/yr on average for the eastern segment. This is interpreted, through slip distribution models, as being related to coupled and uncoupled areas between the surface and ~ 20 km in depth. InSAR observations also show significant temporal creep rate variations (accelerations) during the considered time span along the western segment. The transient behavior of the creep is not consistent with typical postseismic afterslip following the 1997 Ms 6.8 earthquake. The creep is thus interpreted as persistent aseismic slip during an interseismic period, which has a pulse‐ or transient‐like behavior.

Geodetic exploration of strain along the El Pilar Fault in northeastern Venezuela

AbstractWe use Global Navigation Satellite Systems observations in northeastern Venezuela to constrain the El Pilar Fault (EPF) kinematics and to explore the effects of the variable elastic properties of the surrounding medium and of the fault geometry on inferred slip rates and locking depth. The velocity field exhibits an asymmetric velocity gradient on either side of the EPF. We use five different approaches to explore possible models to explain this asymmetry. First, we infer a 1.6 km locking depth using a classic elastic half‐space dislocation model. Second, we infer a 1.5 km locking depth and a 0.33 asymmetry coefficient using a heterogeneous asymmetric model, including contrasting material properties on either side of a vertical fault, suggesting that the igneous‐metamorphic terranes on the northern side are ~2 times more rigid than the sedimentary southern side. Third, we use a three‐dimensional elastostatic model to evaluate the presence of a compliant zone, suggesting a 30% reduction of rigidity in the upper 3 km at the depth of a 1 to 5 km wide fault zone. Fourth, we evaluate the distribution of fault slip, revealing a widespread partial creep pattern in the eastern upper segment, while the upper western segment exhibits a partially locked area, which coincides with the rupture surface of the 1797 and 1929 earthquakes. To supplement these models, we upgrade the previously published displacement simulation method using nonvertical dislocations with data acquired between 2003 and 2013. The localized aseismic displacement pattern associated with creeping or partially creeping fault segments could explain the low level of historic seismicity.

Ophiolite-Related Ultramafic Rocks (Serpentinites) in the Caribbean Region: A Review of their Occurrence, Composition, Origin, Emplacement and Ni-Laterite Soil Formation

Ultramafic rocks, mainly serpentinized peridotites of mantle origin, are mostly associated with the ophiolites of Mesozoic age that occur in belts along three of the margins of the Caribbean plate. The most extensive exposures are in Cuba. The ultramafic-mafic association (ophiolites) were formed and emplaced in several different tectonic environments. Mineralogical studies of the ultramafic rocks and the chemistry of the associated mafic rocks indicate that most of the ultramafic-mafic associations in both the northern and southern margins of the plate were formed in arc-related environments. There is little mantle peridotite exposed in the ophiolitic associations of the west coast of Central America, in the south Caribbean in Curacao and in the Andean belts in Colombia. In these occurrences the chemistry and age of the mafic rocks indicates that this association is mainly part of the 89 Ma Caribbean plateau province. The age of the mantle peridotites and associated ophiolites is probably mainly late Jurassic or Early Cretaceous. Emplacement of the ophiolites possibly began in the Early Cretaceous in Hispaniola and Puerto Rico, but most emplacement took place in the Late Cretaceous to Eocene (e.g. Cuba). Along the northern South America plate margin, in the Caribbean mountain belt, emplacement was by major thrusting and probably was not completed until the Oligocene or even the early Miocene. Caribbean mantle peridotites, before serpentinization, were mainly harzburgites, but dunites and lherzolites are also present. In detail, the mineralogical and chemical composition varies even within one ultramafic body, reflecting melting processes and peridotite/melt interaction in the upper mantle. At least for the northern Caribbean, uplift (postemplacement tectonics) exposed the ultramafic massifs as a land surface to effective laterization in the beginning of the Miocene. Tectonic factors, determining the uplift, exposing the peridotites to weathering varied. In the northern Caribbean, in Guatemala, Jamaica, and Hispaniola, uplift occurred as a result of transpresional movement along pre-existing major faults. In Cuba, uplift occurred on a regional scale, determined by isostatic adjustment. In the south Caribbean, uplift of the Cordillera de la Costa and Serrania del Interior exposing the peridotites, also appears to be related to strike-slip movement along the El Pilar fault system. In the Caribbean, Ni-laterite deposits are currently being mined in the central Dominican Republic, eastern Cuba, northern Venezuela and northwest Colombia. Although apparently formed over ultramafic rocks of similar composition and under similar climatic conditions, the composition of the lateritic soils varies. Factors that probably determined these differences in laterite composition are geomorphology, topography, drainage and tectonics. According to the mineralogy of principal ore-bearing phases, Dominican Ni-laterite deposits are classified as the hydrous silicate-type. The main Ni-bearing minerals are hydrated Mg-Ni silicates (serpentine and “garnierite”) occurring deeper in the profile (saprolite horizon). In contrast, in the deposits of eastern Cuba, the Ni and Co occurs mainly in the limonite zone composed of Fe hydroxides and oxides as the dominant mineralogy in the upper part of the profile, and are classified as the oxide-type.

Present-day deformation along the El Pilar Fault in eastern Venezuela: Evidence of creep along a major transform boundary

The right-lateral strike-slip El Pilar Fault is one of the major structures that accommodate the relative displacement between the Caribbean and South-America Plates. This fault, which trends East–West along the northeastern Venezuela margin, is a seismogenic source, and shows numerous evidence for active tectonics, including deformation of the Quaternary sediments filling the Cariaco Gulf. Because the main El Pilar Fault strand belongs to a set of strike-slip faults and thrusts between the stable Guyana shield (South) and the Caribbean oceanic floor (North), a GPS network was designed and installed to measure the relative motion of the El Pilar Fault and other faults. The results obtained from the comparison of 2003 and 2005 surveys indicate: (i) a lack of significant displacement (especially shortening) in the Serrania del Interior (Neogene cordillera overthrusted above the Guyana craton), (ii) an eastward displacement (relative to fixed south America plate) up to 22 mm/year of benchmarks located north of the El Pilar Fault. Velocities simulations using dislocations in an elastic half-space show: (1) the concentration along the El Pilar Fault of the whole Caribbean-South America relative displacement, (2) the existence of an important component of aseismic displacement along the upper part of the El Pilar Fault. Between 12 km depth and the surface, only 40% of displacement is locked for the western segment and 50% for the eastern segment. This last phenomenon may be related to the existence of serpentinite lenses along the fault zone as observed for segments of San Andreas and North Anatolian faults.

Mantle transition zone beneath the Caribbean-South American plate boundary and its tectonic implications

We analyzed receiver-function data recorded by a temporary broadband array deployed as part of the BOLIVAR project and the permanent seismic network of Venezuela to study the mantle transition zone structure beneath the Caribbean-South American plate boundary and Venezuela. Significant topography on both the 410-km and the 660-km discontinuities was clearly imaged in the CCP (common-conversion-point) stacked images. Beneath the southeastern Caribbean, the 410-km is featured by a narrow (∼ 200 km EW) ∼ 25-km uplift extending in the NS direction around 63° west, while the 660-km is depressed by ∼ 20 km in a narrow region slightly west to the uplift, a scenario that is more consistent with westward descent of the oceanic South American plate rather than a break-off of NNW dipping proto-Caribbean oceanic lithosphere along the El Pilar Fault. We also found a thick transition zone beneath the Falcon region in northwestern Venezuela, possibly associated with the subducted Nazca plate. A flat 410-km was observed beneath the Guayana shield, suggesting that the shield has a stable and moderately deep keel, which has little effect on the underlying transition zone structure.

Triangulation-to-GPS and GPS-to-GPS geodesy in Trinidad, West Indies: Neotectonics, seismic risk, and geologic implications

We estimated horizontal velocities at 25 sites first surveyed in a 1901–1903 British Ordnance Survey triangulation and then resurveyed with GPS in 1994–1995 to identify Trinidad's principal active on-land faults, quantify fault-slip-rates, and test for elastic locking. Our best-fit single-fault elastic dislocation model put 12 ± 3 mm/yr of dextral strike-slip on the Central Range Fault (1–2 km locking depth), an apparently aseismic active fault. The estimated motions also showed statistically insignificant horizontal motion (2.2 ± 1.8 mm/yr of right-slip; 2.7 ± 2.0 mm/yr of N–S shortening) on the eastward on-strike extension of the El Pilar Fault, known to be the active transform fault in Venezuela. Repeat GPS measurements made between 1994 and 2005 at two sites spanning the island north to south showed a 14 ± 3 mm/yr eastward (plate-motion-parallel) dextral velocity differential, consistent with our best-fit historic (1901–1995) fault-slip-rate. Paleoseismology trenching demonstrates that the Central Range Fault cuts <5000-year-old sediment and is capped by ∼550-year-old sediment, suggesting that it may be locked and may have ruptured at least once during this time interval. About ∼5 mm/yr of slip could be taken up on the Los Bajos Fault and additional faults in the offshore south of Trinidad. The existing 1901–1995 and 1994–2005 geodetic data alone cannot resolve whether the Central Range Fault is essentially creeping (≤1–2 km locking depth) or locked to a more standard depth of 10 km.

Miocene to recent Cariaco basin, offshore Venezuela: Structure, tectonosequences, and basin-forming mechanisms

The Cariaco basin, located ∼40 km off the central part of the coast of Venezuela, is the largest (∼4000 km 2) and bathymetrically deepest (1400 m BSL) Neogene fault-bounded basin within the right-lateral strike-slip plate boundary zone that separates the Caribbean and South American plates. Using subsurface geophysical data, we test two previously proposed tectonic models for the age, distribution and nature of east–west-striking, strike-slip faults, and basin-forming mechanism for the two main depocenters of the Cariaco basin. The earliest interpretation for the opening of the twin Cariaco depocenters by Schubert (1982) proposes that both depocenters formed synchronously by extension along transverse (north-south) normal faults at a ∼30-km-wide rhomboidally-shaped pull-apart basin between the right-lateral, east–west-striking, and parallel San Sebastian and El Pilar fault zones. A later model by Ben-Avraham and Zoback (1992) proposes that both depocenters formed synchronously by a process of ”transform-normal parallel extension”, or rifting in a north–south direction orthogonal to the east-west-striking and parallel strike-slip faults. We use more than 4000 km of 2D single- and multi-channel seismic data tied to 11 wells to map 5 tectono-stratigraphic sequences and to produce a series of structural and isopach maps showing how the faults that controlled both Cariaco depocenters evolved from Paleogene to the present. Comparison of fault and isopach maps for dated horizons from Paleogene to late Neogene in age show three main phases in basin development: 1) from middle Miocene to Pliocene, the West Cariaco basin formed as a rhomboidally-shaped pull-apart at a 30-km-wide stepover between the northern branch of the San Sebastian fault and the El Pilar fault zone; 2) during the early Pliocene, a new strike-slip fault transected the West Cariaco basin (southern branch of the San Sebastian fault) and caused extension to cease; and 3) during the early Pliocene to recent, a “lazy-Z” shaped pull-apart formed along the curving connection between the southern branch of the San Sebastian and El Pilar fault zones.

Crustal structure of the South American–Caribbean plate boundary at 67°W from controlled source seismic data

We present the results of new seismic reflection and wide‐angle data across the SE Caribbean plate boundary. The 550 km long N–S profile crosses the structures involved in the active 55 Ma long continent‐arc oblique collision between the Caribbean (CAR) and the South American (SA) plate. From the north to the south these structures include the accretionary prism, the extinct volcanic arc (Leeward Antilles arc), the Tertiary Bonaire basin, the continental‐size dextral strike‐slip fault system (San Sebastián–El Pilar fault), the allochthonous exhumed terranes, and the authocthonous fold and thrust belt (Caribbean Mountain system) and foreland basin. The wide‐angle data show that these elements are characterized by different velocity structures and that they are separated by sharp lateral velocity variations. The Leeward Antilles arc exhibits a velocity structure similar to that of the Lesser Antilles active volcanic arc, indicating that the extinct arc has not been modified by the collision with the SA plate. The data show a ∼20 km change in crustal thickness across the San Sebastián fault, suggesting that the dextral strike‐slip fault is a crustal feature that likely continues in the mantle as a primary strand of the plate boundary between the South American and the Caribbean plates. South of the strike‐slip fault and beneath the exhumed eclogitic terranes, the data image a north dipping, high‐velocity (&gt;6.5 km/s) anomaly in the upper crust (3–11 km), indicating that high‐pressure/low‐temperature rocks are the likely lithologies responsible for the high seismic velocities and suggesting that exhumation of these assemblages is enabled by the strike‐slip fault.

Key issues on the post-Mesozoic Southern Caribbean Plate boundary

Abstract A lithospheric-scale, geodynamic model of the Caribbean southern boundary takes into account tectonic and stratigraphic elements previously unconsidered or not well constrained. The Falcón, Bonaire, Blanquilla and Grenada basins are parts of a former single back-arc basin associated with the migrating Mesozoic Caribbean Arc in Late Eocene–Oligocene times. Spreading of the crescent-shaped basin was triggered by declining Caribbean eastward motion in response to increased convergence between the two Americas at around 38–33 Ma. Dextral wrenching along the southern boundary started in western Venezuela at 17–15 Ma and progressed eastward to the El Pilar Fault by 12 Ma. Eastward motion of the Caribbean relative to South America was earlier accommodated by east-progressing, non-partitioned oblique subduction and collision, as illustrated today in eastern Venezuela around the Los Bajos–El Soldado fault system. Extrusion of the Maracaibo and Bonaire blocks towards the NNE started around 5 Ma, thus the dextral Boconó fault is a young feature. Total plate boundary Cenozoic dextral wrenching recorded onshore Venezuela does not exceed 100 km and is more likely to be in the order of 55 km.

Analysis and interpretation of the October 21, 1766 earthquake in the Southeastern Caribbean

The October 21, 1766 earthquake is the most widely felt event in the seismic history of Trinidad and Venezuela. Previous works diverged on the interpretation of the historical data available for this event. They associated the earthquake either with the Lesser Antilles subduction zone, with strike-slip motion along El Pilar fault, or with intraplate deformation at the edge of Guyana shield. Isoseismal areas are proposed after a new search and analysis of primary and secondary sources of historical information. Two of the largest earthquakes of the twentieth century which occurred in the region, the 1968 (M S 6.4, h = 103 km), and the 1997 (M W 6.9, h = 25 km) events, for which both intensity data and instrumentally determined source parameters are available, are used to calibrate the isoseismal areas and to interpret them in terms of source depth and magnitude. It is concluded that the large extent of intensity values higher than V is diagnostic of the depth (85 ± 20 km) of the 1766 source, and of local amplifications of ground motion due to soft soil conditions and to strong contrasts of impedance at the edge of Guyana shield. It is proposed that the event occurred either in slab, or close to the bottom lithospheric interface between the Caribbean and South American plates (∼11°N; ∼62.5°W). The value of the magnitude is estimated at 6.5 < M S < 7.5 depending on the source depth and on the decay of ground motion as a function of distance. Deep and intermediate depth earthquakes can induce important casualties in Trinidad, Venezuela, and Guyana, possibly more damaging than those induced by shallower earthquakes along the strike of El Pilar Fault.

Revised seismic history of the El Pilar fault, Northeastern Venezuela, from the Cariaco 1997 earthquake and recent preliminary paleoseismic results

In light of the July 9, 1997, Cariaco earthquake, it is clearly understood now that damage in the city of Cumana – located in northeastern Venezuela and frequently destroyed by the largest earthquakes since the first recorded event in 1530 – is strongly enhanced by poor soil conditions that, in turn, are responsible for site amplification and widespread earthquake-induced effects. Therefore, most previous macroseismic studies of historical earthquakes must be revaluated because those localized high-intensity values at Cumana surely led to the misestimation of past epicenters. Preliminary paleoseismic results, gathered at three exploratory trenches dug across the surface break of the Cariaco 1997 earthquake in 1998, allow us to associate the 1684 earthquake with this recently ruptured fault segment that extends between the towns of San Antonio del Golfo and Rio Casanay (roughly between the two gulfs of Cariaco and Paria, state of Sucre). Other major results from the reassessment of the seismic history of this fault are: (a) the 1766 event seems to have generated in a different source to the El Pilar fault because the size of the felt area suggests that it is an intermediate-depth earthquake; (b) damage to Cumana produced by the 1797 event suggests that this was a local earthquake, perhaps equivalent to the 1929 earthquake, which ruptured for some 30 km just east of Cumana into the Gulf of Cariaco; and (c) seismogenic association of the 1530 and 1853 earthquakes still remains unclear but it is very likely that these ruptures occurred offshore, as suggested by the rather large tsunami waves that both events have generated, placing their hypocenters west of Cumana in the Cariaco Trough. This reassessment also sheds light into the El Pilar fault segmentation and the behavior of its seismogenic barriers through time.

Surface rupture of the Cariaco July 09, 1997 earthquake on the El Pilar fault, northeastern Venezuela

This paper discusses the surface rupture of the Cariaco July 09, 1997 Ms 6.8 earthquake in northeastern Venezuela – located at 10.545°N and 63.515°W and about 10 km deep. The field reconnaissance of the ground breaks confirms that this event took place on the ENE–WSW trending onshore portion of the dextral El Pilar fault (between the Gulfs of Cariaco and Paria), which is part of the major wrenching system within the Caribbean–South America plate boundary zone. Dextral slip along this fault was further supported by the structural style of this rupture (en echelon right-lateral R shears connected by mole tracks at restraining stepovers) and by larger geometric complexities (pop-ups at Las Manoas and Guarapiche), as well as by the focal mechanism solutions determined for the event by several authors. This 1997 surface ruptre comprised two distinct sections, from west to east: (a) a main very conspicuous, continuous, 30-km-long, rather straight, 075°N-trending alignment of en echelon surface breaks, with a rather constant, purely dextral coseismic slip of about 25 cm, but reaching a maximum value of 40 cm slightly northwest of Pantoño; and (b) a secondary discontinuous, 10-km-long, boomerang-shaped rupture, with a maximum coseismic slip of 20 cm at Guarapiche. The onshore extent of the surface rupture totalled 36 km, but may continue westward underwater, as suggested by the very shallow aftershock seismicity. This aftershock activity also clearly defined the steep north dip of the fault plane along the western rupture, suggesting tectonic inheritance on this major fault. From many locals' accounts, the rupture seems to have propagated from Pantoño to the west (highly asymmetric bidirectionality). This suggests that earthquake nucleation happened at or near the Casanay–Guarapiche restraining bend and rupture quickly propagated westward, allowing only a small fraction to progress eastwards beyond the bend. Additionally, the large fraction of after-slip (or creep) released is to be related to such restraining bend, which seems to have partly locked slip during rupture.

The velocity structure of the Cariaco sedimentary basin, northeastern Venezuela, from refraction seismic data and possible relationship to earthquake hazard

The main damage from the July 9, 1997, Cariaco earthquake (Ms=6.8) was concentrated in the town of Cariaco and surrounding villages, which are located in the western part of the Cariaco sedimentary basin, close to the Gulf of Cariaco. Casanay, located at the eastern end of the sedimentary basin, suffered considerably less damage. The El Pilar fault, a right-lateral strike-slip fault that generated the earthquake, runs parallel to the southern border of the valley and crosses both towns. The determination of the velocity structure of the basin is the main objective of this study. Seismic refraction data were recorded along three lines, one of them along-strike and two perpendicular to the valley axis in the northern and southern bedrocks. Beneath Cariaco, approximately 1 km thick Quaternary sediments with seismic velocities of 1.9–2.1 km/s and bedrock velocities of more than 4 km/s were observed. The thickness of the Quaternary sediments varies within the basin, and Pleistocene sediments outcrop beneath Casanay. The increased thickness of the unconsolidated, water-saturated Quaternary sediments, together with the difference in the quality of buildings prior to the earthquake, probably is responsible for the damage pattern of the Cariaco earthquake.

Aftershock pattern of the July 9, 1997 Mw=6.9 Cariaco earthquake in Northeastern Venezuela

The Mw=6.9 Cariaco earthquake of July 9, 1997 was the strongest earthquake that occurred on the El Pilar fault between Cumaná and the Gulf of Paria in the 20th century. The El Pilar fault is the most prominent strike-slip fault in the transition zone between the Caribbean plate and the South American plate in this region. We installed 18 seismic and 10 strong motion stations for recording aftershocks. We calculated the hypocenters of 1306 aftershocks with magnitudes between −0.5 and 4.1. Most aftershocks concentrated near the documented trace of the El Pilar fault. The spatial distribution of the aftershocks allowed us to separate the aftershock region on the El Pilar fault into six segments with different dip angles. We computed and classified fault-plane solutions of 222 aftershocks. The majority of fault-plane solutions are of strike-slip type. Some segments show differences in the dominating type of focal mechanisms. From the aftershock distribution and spatial variation of b-values we inferred a rupture length of the Cariaco earthquake of 60 km, and thus an average displacement of ∼1.3 m during the main shock is estimated. Two out of four stepovers, which were found on this length, were seismically activated during the monitoring time interval. The b-value distribution on the fault plane appears to define two areas of major stress relaxation: beneath Cariaco and half way between Casanay and El Pilar close to the surface.

A simple and rapid method to locate fault traces by measurements of214Bi in soils

A simple and rapid technique is presented to determine the relative counts of 214Bi in surface soils to locate active fault traces of the El Pilar Fault in the state of Sucre, Venezuela. The method employes a portable differential gamma-ray spectrometer on site with 300 seconds of measuring time. Three transects across the El Pilar fault of very different geological aspects were studied. One of the advantages of this technique in respect to determining 222Rn in soil-gas is that no soil-gas probes are required to be inserted in the soil and it is not necessary to know the appropriate depth. Finally, it has been suggested that measurements of 1000 seconds would be preferred rather than 300 seconds for future studies even though this would limit the number of measurements to about 20 per day.

Site effects of the 1997 Cariaco, Venezuela earthquake

During the July 9, 1997 Cariaco earthquake, the small town of Cariaco (located 10 km SW from the epicenter) and Cumaná (capital of the State of Sucre, located about 80 km west from the epicenter) were the most affected towns. The damage in Cariaco was essentially restricted to one-century-old dwellings in the downtown area, but also three rather modern buildings collapsed. A maximum intensity of VIII (MMI) was determined for the epicentral area with a clear orientation of the major damage along the strike of the El Pilar fault in east–west direction. The induced effects associated with this event are dominated by liquefaction phenomena and lateral spreading on soft sedimentary lowlands (along the shoreline of the Cariaco Gulf and riverbeds), as well as sliding at unstable slopes. Site studies were carried out in Cariaco, involving the geotechnical analysis of boreholes, seismic refraction studies and microtremor measurements to determine the characteristics of the Quaternary sediment fill in the area. From seismic refraction surveys, an interface separating sediments with S-wave velocity lower than 700 m/s from stiffer ones was located at 60–90 m in depth in the southern part of Cariaco. Further north it is supposed to exceed 90 m. Predominant periods of soil, derived from microtremor observations in Cariaco, vary between 0.6 and 1.2 s. The high percentage of damage in the center of Cariaco can be attributed to the poor quality of the dwellings combined with the presence of thick, poorly consolidated soils, and, in some particular cases, to liquefaction phenomena.

GPS estimate of relative motion between the Caribbean and South American plates, and geologic implications for Trinidad and Venezuela

Global Positioning System (GPS) data from eight sites on the Caribbean plate and five sites on the South American plate were inverted to derive an angular velocity vector describing present-day relative plate motion. Both the Caribbean and South American velocity data fit rigid-plate models to within ±1–2 mm/yr, the GPS velocity uncertainty. The Caribbean plate moves approximately due east relative to South America at a rate of ∼20 mm/yr along most of the plate boundary, significantly faster than the NUVEL-1A model prediction, but with similar azimuth. Pure wrenching is concentrated along the approximately east-striking, seismic, El Pilar fault in Venezuela. In contrast, transpression occurs along the 068°-trending Central Range (Warm Springs) fault in Trinidad, which is aseismic, possibly locked, and oblique to local plate motion.

Monitoring of radon anomalies in the Rio Casanay and a thermal spring near the El Pilar fault shortly after the July 9, 1997 earthquake (Mw=6.9) in the state of Sucre (Venezuela)

Immediately, after the July 9, 1997 earthquake (Ms = 6.8) in the state of Sucre, Venezuela, we began measuring radon in water to investigate the possible correlations with the seismic activity and to study the meteorological affects. Sampling periods were for 3–5 days with 4–8 weeks in between each. During the first two sampling periods, the seismic activity was high with several minor events (Mb≥4.0) and anomalous radon concentrations were measured and considered as possible precursors for the events. We have also shown that the radon activity was stable except for daily meteorological effects during periods of low seismic activity. The radon activity during the first year after the major event on July 9, 1997, at the beginning of the rainy season increased from about 50 pCi/l to about 350 pCi/l for all sampling points. Then abruptly dropped to 100 pci/l at the beginning of the next rainy season for points #1 and #2 in the Casanay river and stayed relativelystable during the second year. At the start of the third year, the values began to increase again, similarly to the first year. We concluded that this was caused by the heavy rainfall at the beginning of the rainy season. While at the sampling points at Hotel Cristal, thermal spring pool, it decreased slowly during the second year but increased again at the onset of the third year. Finally, we have concluded as other investigators, that monitoring radon activity alone is insufficient to predict minor earthquakes (Mb≥4.0), but in some cases it can be considered as a precursor.