Efficient Photoinitiators Research Articles

Imidazole-stabilized gold nanoclusters as photocatalytic initiator and crosslinker to fabricate functional hydrogel

Photopolymerization is the most widely used method to fabricate hydrogels, which hold great potentials in various fields including biomedical applications, electronic skin and flexible wearable devices. Herein, gold nanoclusters (AuNCs) were employed as both efficient photo-initiators and crosslinkers to prepare polyacrylamide (PAM) hydrogels with good mechanical properties. Firstly, an imidazole-based monomer, ImPAA, was designed and synthesized, serving as an reducing agent and ligand to prepare imidazole-stabilized AuNCs (AuNC@ImPAA) in water. Under white light irradiation, AuNC@ImPAA efficiently initiated the radical polymerization of acrylamide monomers in water via a photocatalytic mechanism. The abundant vinyl groups on the surface of AuNC@ImPAA enabled its role as a multiple covalent crosslinker, endowing the resulting hydrogel with impressive mechanical properties. The maximum tensile strength and fracture strain was 287 kPa and 591 %, respectively. Moreover, triggered by UV light, the embedded AuNC@ImPAA within the hydrogel aggregated and converted into gold nanoparticles (AuNPs), yielding an AuNP/PAM hydrogel. This hybrid AuNP/PAM hydrogel exhibited a good photothermal conversion performance, with an efficiency of 14.14 % under 660 nm laser irradiation, and its potential as a photothermal actuator was demonstrated. Thus, we provide a facile light-mediated strategy to fabricate functional hydrogel.

Photopolymerization initiated by p-diethylene glycol monomethyl ether cinnamyl formamide-based disulfide under 455 nm LED with minimized volume shrinkage

This study introduces a novel p-diethylene glycol monomethyl ether cinnamyl formamide-based disulfide monomer, N,N′-(disulfanediylbis(2,1-phenylene)) bis(4-(4-(2-(2-methoxyethoxy)ethoxy) phenyl)-2-oxobut-3-enamide) (Mp-BSCF), designed to reduce the volume shrinkage of photosensitive resins and initiate monomer polymerization under 455 nm LED light irradiation. The photochemical properties and photoinitiation efficiency of Mp-BSCF are systematically investigated using UV–vis absorption spectroscopy, electron paramagnetic resonance (EPR) and real-time infrared spectroscopy. Although its weak absorption around 455 nm, Mp-BSCF can generate arylthiyl radicals under 455 nm LED irradiation, and then effectively initiate the polymerization of triethylene glycol dimethacrylate (TEGDMA)/A glycerolate dimethacrylate (Bis-GMA) system. Increasing Mp-BSCF addition enhances the final double bond conversion and maximum polymerization rate of the TEGDMA/Bis-GMA system, reaching up to 82.0 % and 2.02 % s−1, respectively. Notably, Mp-BSCF significantly reduces the volume shrinkage of the photopolymerization system, with the addition of 10 % Mp-BSCF resulting in a 50 % reduction compared to the control system. This reduction is attributed to the dynamic reversible nature of the SS bond “breaking-recovery” and the intermolecular hydrogen bond interaction. Additionally, Mp-BSCF improves the thermal stability, friction resistance, and hardness of the TEGDMA/Bis-GMA photopolymerization system.

Cyclo‐Bis(Acyl)phosphine Oxides as Efficient Photoinitiators for Radical Polymerization

AbstractAcyclic acylphosphine oxides have been extensively utilized in industrial applications as typical photoinitiators (PIs). In this study, we demonstrate the efficiency of their cyclic analogues, cyclo‐bis(acyl)phosphine oxides (CBAPOs), as efficient PIs. We present the isolation and X‐ray crystallographic characterization of CBAPOs. These compounds exhibit a long maximum absorption wavelength ranging between 415 and 420 nm, extending well into the near 500 nm region. Radical trapping experiments suggest that CBAPOs undergo homolytic P−C(O) bond α‐cleavage. Steady‐state photolysis conducted with LED light at 390 nm, monitored by UV‐Vis spectroscopy, confirms the gradual decay of CBAPOs over time. Additionally, all CBAPOs are capable of initiating radical polymerization under irradiation at 365 nm. Notably, one of the CBAPOs (4a) demonstrates comparable photoinitiating efficiency to one of commercially available bis(acyl)phosphine oxides (Irgacure 819).

The effect of photoinitiator type and filler load on physicochemical and mechanical properties of experimental light-cured resin cements through lithium disilicate ceramics of different shades and thicknesses

ObjectiveThis study investigated the influence of photoinitiator types on degree of conversion (DC), rate of polymerization (RP), flexural strength (FS), flexural modulus (FM), and light transmittance (LT) of filled and unfilled light-curable resin cements through different thicknesses and shades of lithium disilicate ceramics. MethodsLithium disilicate ceramic discs (IPS Emax Press, background [0.0], 0.5, 1.0, 2.0, 3.0, and 4.0 mm, shades A1 and BL3) were prepared. Experimental resin-based cements [TEGDMA/BisGMA (50/50 mass%)] were prepared using either camphorquinone (CQ)/amine (0.44/1.85 mol%) or TPO (0.44 mol%)], and a micro and nanofiller loads of nil (unfilled); 40/10 mass%; and 50/10 mass%). Resin cements (0.2 mm thick) were placed on the lower surface of the ceramic specimens and light-activated for 30 s from the upper surface using a Bluephase Style curing light (exitance at tip: 1236 mW/cm2 ± 1.20). LT and distribution of irradiance through the ceramics were measured using a UV–vis spectrometer and a beam profile camera, respectively (n = 3). The DC and RP were measured in real-time using mid infrared spectroscopy in attenuated total reflectance (ATR) mode (n = 3). FS and FM were measured using a universal testing machine (n = 5). Statistical analyses were performed on LT, DC, RP, FS, and FM data using a general linear model, and supplementary ANOVA and post hoc Tukey multiple comparison test were also performed (α = .05). ResultsThicknesses, shades, photoinitiator type, and fillers load significantly influenced the optical and mechanical characteristics of the resin-based materials (p < 0.05). The BL3 shade ceramic provided higher values of DC, RP, FS, FM, and LT compared with the A1 shade (p < 0.05). Increasing ceramic thickness decreased the properties of the resin-based materials (p < 0.05). Generally, TPO improved mechanical properties of the resin cement compared with CQ (p < 0.05). SignificanceThe luting process of indirect restorations may be improved by using high molar absorptivity, more reactive, and more efficient photoinitiators such as TPO, as opposed to conventional CQ. The use of such initiator may allow the placement of thicker and more opaque indirect restorations.

Carbazole-fused coumarin bis oxime esters (CCOBOEs) as efficient photoinitiators of polymerization for 3D printing with 405 nm LED

In this research, the innovative design and successful synthesis of two visible light photoinitiators, namely CCOBOE0 and CCOBOE1, have been confirmed through nuclear magnetic resonance (NMR) and mass spectrometry (MS). Both compounds exhibit strong absorption properties at 385, 405 and 450 nm, and FT-IR analyses have substantiated the ability of CCOBOE1 to initiate the polymerization of a trifunctional acrylate monomer (TMPTA) under these three light sources. The optimal conditions for maximizing the photoinitiation potential of CCOBOE1 were determined to be at a concentration of 2 × 10−5 mol.g−1 and under 405 nm LED irradiation. Photolysis experiments, theoretical calculations, detection of CO2 absorption peaks, and ESR experiments have all confirmed the generation of methyl radicals by CCOBOE1. Utilizing the identified optimal conditions, a “XYZ” pattern with a thickness of 963 μm and a 3D-object were successfully obtained via direct laser write (DLW) and digital light processing (DLP) 3D-printing upon irradiation at 405 nm. Additionally, differential scanning calorimetry (DSC) analyses demonstrated the promising performance of CCOBOE1 in initiating the thermal polymerization of acrylate monomers. In summary, the difunctional CCOBOE1 showed outstanding performance in both photo-initiation and thermal initiation of acrylate monomers. It provides a novel direction for the development of novel OXEs with dual activation modes.

New Application of Multiresonance Organic Delayed Fluorescence Dyes: High-Performance Photoinitiating Systems for Acrylate and Epoxy Photopolymerization and Photoluminescent Pattern Preparation.

The primary focus of photopolymerization research is to advance highly efficient visible photoinitiating systems (PISs) as alternatives to conventional ultraviolet (UV) photoinitiators. We developed four multiresonance emitters (BIC-pCz, BNO1, BO-DICz, and TPABO-DICz) to sensitize iodonium salt (Iod) and initiate free-radical and cationic photopolymerization under visible light for the first time. The TPABO-DICz/Iod system achieved a double-bond conversion of over 70% within just 4 s of exposure to green light (520 nm), while the BNO1/Iod system achieved a double-bond conversion exceeding 50% with 10 s of exposure to red light (630 nm). The photochemical properties were studied through thermodynamic research, steady-state photolysis, and electron spin resonance. Photolithography techniques were employed to fabricate photoluminescent films and micrometer-scale patterns utilizing the blue-emitting BIC-pCz dye, showcasing the potential of photolithography in the production of photoluminescent pixels. Additionally, the BIC-pCz/Iod and TPABO-DICz/Iod systems have been employed to rapidly fabricate photoluminescent polymer patterns using a digital-light-processing 3D printer with a low-intensity light (3.2 mW cm-2). These multiresonance emitters show exceptional photosensitizing effects and can act as fluorescent dyes in photoluminescent patterns, highlighting the potential of utilizing photopolymerization for OLED applications.

Eosin Y derivatives for visible light-mediated free-radical polymerization: Applications in 3D-photoprinting and bacterial photodynamic inactivation

This study reports the design and the subsequent use of mono-allylated (EY-MA) and di-allylated (EY-DA) derivatives of eosin Y (EY) as highly efficient visible light-sensitive photosensitizers (PS) of bio-based H-donor molecules (cysteamine (Cys) or N-acetyl-L-cysteine (NAC)) and an electron donor (N-methyldiethanolamine, MDEA) for free-radical and thiol-acrylate polymerizations of a biobased monomer derived from soybean oil (SOA) upon exposure to visible light. High final acrylate conversions for SOA polymerization (up to 80 %) evidence the efficient photoinitiating properties of the eosin derivatives systems under irradiation with light emitting diodes (LEDs) centred at 405, 455 and 505 nm, and outperform those obtained with EY and other common photosensitizers such as camphorquinone or benzophenone. As described by fluorescence and phosphorescence analyses, laser flash photolysis (LFP) and electron paramagnetic resonance spin-trapping (EPR-ST) experiments, EY-MA and EY-DA can react via a proton/proton-coupled electron transfer reaction with Cys (or NAC) and MDEA respectively. The efficient singlet oxygen generation of the EY-MA-based materials upon exposure to visible light leads to excellent antibacterial properties, against both Gram-positive Staphylococcus aureus (S. aureus) and Gram-negative Escherichia coli (E. coli). A 3-log decrease of E. coli adhesion on the surface of the materials is observed and 100 % adhesion inhibition of S. aureus is also demonstrated. The co-polymerization of the eosin-derived PS with the polymer matrix ensures sustainable antibacterial properties against both bacteria strains upon visible light exposure as it prevents their leakage out of the polymer network. Finally, finely complex 3D structures are successfully obtained by a 3D-photoprinting technology with the investigated EY-MA-based formulation using LED@405 nm.

Heteroatom/Heterocycle-Substituted Ketone Dyes as Efficient Photoinitiators in Visible Light-Emitting Diode/Near Infrared Light Photopolymerization with Enhanced Two-Photon Lithography Capability

Heteroatom/Heterocycle-Substituted Ketone Dyes as Efficient Photoinitiators in Visible Light-Emitting Diode/Near Infrared Light Photopolymerization with Enhanced Two-Photon Lithography Capability

Graphene quantum dots–From spectroscopic performance to 3D printing applications and interaction studies with normal and cancer cells

In this study, different types of graphene quantum dots (GQDs) are investigated to understand their spectroscopic properties. Morphological and size analyses were performed. The mechanism of action of radical photopolymerization was evaluated. The obtained materials proved to be useful for developing efficient photoinitiating systems for 3D printing applications. In addition, the cytotoxicity of the GQDs was studied, and their effects on living cells were investigated. We demonstrated that GQDs can not only act as efficient photoinitiators but also as constituents of hydrogels that express very low toxicity and may interact with cells. The latter makes it possible to study them in the future as useful modern biosensors.

3D bioprinting of stromal cells-laden artificial cornea based on visible light-crosslinkable bioinks forming multilength networks

3D bioprinting has the potential for the rapid and precise engineering of hydrogel constructs that can mimic the structural and optical complexity of a healthy cornea. However, the use of existing light-activated bioinks for corneal printing is limited by their poor cytocompatibility, use of cytotoxic photoinitiators (PIs), low photo-crosslinking efficiency, and opaque/colored surface of the printed material. Herein, we report a fast-curable, non-cytotoxic, optically transparent bioprinting system using a new water-soluble benzoyl phosphinate-based PI and photocrosslinkable methacrylated hyaluronic acid (HAMA). Compared with commercially available PIs, the newly developed PI, lithium benzoyl (phenyl) phosphinate (BP), demonstrated increased photoinitiation efficiency under visible light and low cytotoxicity. Using a catalytic amount of BP, the HA-based bioinks quickly formed 3D hydrogel constructs under low-energy visible-light irradiation (405 nm, <1 J cm−2). The mechanical properties and printability of photocurable bioinks were further improved by blending low (10 kDa) and high (100 kDa) molecular weight (MW) HAMA by forming multilength networks. For potential applications as corneal scaffolds, stromal cell-laden dome-shaped constructs were fabricated using MW-blended HAMA/BP bioink and a digital light processing printer. The HA-based photocurable bioinks exhibited good cytocompatibility (80%–95%), fast curing kinetics (<5 s), and excellent optical transparency (>90% in the visible range), potentially making them suitable for corneal tissue engineering.

Highly efficient one-component benzylidene cyclopentanone initiators for visible light polymerization

Visible light polymerization is a development trend in the field of photocuring. However, most of the reported visible light photoinitiators (PIs) are two-component systems that display limited initiation efficiency due to diffusion restriction and back electron transfer effect. In this study, two one-component visible light PIs (BDNPG-1 and BDNPG-2) are synthesized through combining N-phenylglycine (NPG) moiety with cyclopentanone moiety together. Upon irradiation of blue or green light, they can undergo intermolecular electron transfer followed by proton transfer plus a decarboxylation reaction to produce carbon dioxide and aminoalkyl radicals. This decarboxylation reaction is irreversible so that the intermolecular back electron transfer can be effectively blocked, resulting in a significantly improved photoinitiation efficiency of BDNPG-1 and BDNPG-2 compared with their prototype PI (BDEA) containing no NPG group and the two-component system of BDEA+NPG. Furthermore, both of them have strong two-photon absorption capability and show excellent performance in two-photon polymerization.

Designing unimolecular photoinitiator by installing NHPI esters along the TX backbone for acrylate photopolymerization and their applications in coatings and 3D printing

Developing efficient and long wavelength sensitive unimolecular photoinitiators (PIs) is still facing a great challenge. In this work, a series of thioxanthone-based N-hydroxyphthalimide esters (TX-NHPIEs) were synthesized by installing NHPIEs along the TX backbone and characterized. The investigated TX-NHPIEs have a 60 nm redshift and demonstrate sterling initiating efficiency for free radical photopolymerization (FRP) under LED@450 nm light irradiation compared with the commercialized isopropylthioxanthone (ITX). Real-time 1Hnuclear magnetic resonance (1H NMR), electron spin resonance (ESR), decarboxylation and gas chromatograph-mass spectrometer (GC–MS) experiments and density functional theory (DFT) reveal that TX-NHPIEs can generate one alkyl radical and one N-centered iminyl radical, which can initiate FRP directly and indirectly, respectively. In other words, TX-NHPIEs absorb one photon and can generate two active radicals, which break through the limitations of common PIs. TX-NHPIE-Cpe demonstrates the highest initiating efficiency, and its application in coatings and 3D printing was also studied, indicating TX-NHPIEs have broad potential applications in photopolymerization processes.

Push–pull biphenyl–based iodonium salts: Highly sensitive one-component photoinitiators for photopolymerization under UV–visible LEDs

Diaryliodonium salts play an important role as highly efficient photoinitiators in the field of photopolymerizations. They can rapidly photodecompose to produce free radicals and super acids; thus, can initiate highly efficient photocuring of acrylic and epoxy monomers and resins. However, the absorption of commercialized diphenyliodonium salts is poorly matched with popular LED light sources, and the participation of sensitizers is usually required to achieve efficient photoexcitation. Here, we synthesized five new phenyl biphenyl iodonium salts with different electron-pushing and electron-withdrawing substituents, e.g., methoxy and CN, at the biphenyl substituent. Our results demonstrate that all synthesized iodonium salts have strong absorption in the range (λmax = 258–352 nm; εmax = 21,300–29,900 M−1 cm−1). The photochemistry of these synthesized iodonium salt is strongly influenced by substituents on the biphenyl ring. All iodonium salts can undergo rapid photolysis under light excitation, with higher quantum yield of photoacid generation reaching 0.25 and can quickly initiate cationic photopolymerization of epoxy monomers. Furthermore, free radicals are generated during photolysis, which can successfully trigger free radical polymerization. These iodonium salts with good absorbance in the UVA band demonstrate their potential as excellent photoinitiators under 365–405 nm LED excitation.

Thioxanthone-Based Siloxane Photosensitizer for Cationic/Radical Photopolymerization and Photoinduced Sol-Gel Reactions.

In this investigation, a multifunctional visible-light TX-based photosensitizer containing a siloxane moiety (TXS) was designed with a good overall yield of 54%. The addition of a siloxane moiety enabled the incorporation of a TX photosensitizer into a siloxane network by photoinduced sol-gel chemistry, thus avoiding its release. Both liquid 1H and solid-state 29Si NMR measurements undeniably confirmed the formation of photoacids resulting from the photolysis of the TXS/electron acceptor molecule (Iodonium salt), which promoted the photoinduced hydrolysis/condensation of the trimethoxysilane groups of TXS, with a high degree of condensation of its inorganic network. Notably, the laser flash photolysis, fluorescence, and electron paramagnetic resonance spin-trapping (EPR ST) experiments demonstrated that TXS could react with Iod through an electron transfer reaction through its excited states, leading to the formation of radical initiating species. Interestingly, the TXS/Iod was demonstrated to be an efficient photoinitiating system for free-radical (FRP) and cationic (CP) polymerization under LEDs@385, 405, and 455 nm. In particular, whatever the epoxy monomer mixtures used, remarkable final epoxy conversions were achieved up to 100% under air. In this latter case, we demonstrated that both the photoinduced sol-gel process (hydrolysis of trimethoxysilane groups) and the cationic photopolymerization occurred simultaneously.

Two- and three-photon processes during photopolymerization in 3D laser printing.

The performance of a photoinitiator is key to control efficiency and resolution in 3D laser nanoprinting. Upon light absorption, a cascade of competing photophysical processes leads to photochemical reactions toward radical formation that initiates free radical polymerization (FRP). Here, we investigate 7-diethylamino-3-thenoylcoumarin (DETC), belonging to an efficient and frequently used class of photoinitiators in 3D laser printing, and explain the molecular bases of FRP initiation upon DETC photoactivation. Depending on the presence of a co-initiator, DETC causes radical generation either upon two-photon- or three-photon excitation, but the mechanism for these processes is not well understood so far. Here, we show that the unique three-photon based radical formation by DETC, in the absence of a co-initiator, results from its excitation to highly excited triplet states. They allow a hydrogen-atom transfer reaction from the pentaerythritol triacrylate (PETA) monomer to DETC, enabling the formation of the reactive PETA alkyl radical, which initiates FRP. The formation of active DETC radicals is demonstrated to be less spontaneous. In contrast, photoinitiation in the presence of an onium salt co-initiator proceeds via intermolecular electron transfer after the photosensitization of the photoinitiator to the lowest triplet excited state. Our quantum mechanical calculations demonstrate photophysical processes upon the multiphoton activation of DETC and explain different reactions for the radical formation upon DETC photoactivation. This investigation for the first time describes possible pathways of FRP initiation in 3D laser nanoprinting and permits further rational design of efficient photoinitiators to increase the speed and sensitivity of 3D laser nanoprinting.

Flavin mononucleotide in visible light photoinitiating systems for multiple-photocrosslinking and photoencapsulation strategies

Visible light-induced photocrosslinking techniques have attracted significant attention for their flexibility, controllability, safety, and energy conservation, especially in tissue engineering and biofabrication, compared to UV photocrosslinking. Despite these advantages, current photoinitiators are constrained by various challenges, including inadequate photoinitiation efficiency, low biocompatibility, poor water solubility, and limited compatibility with diverse crosslinking systems. Here, a water-soluble derivative of riboflavin, flavin mononucleotide (FMN−), was used to assess its potential as an initiator in multiple-photocrosslinking systems, including radical photopolymerization, dityrosine, and ditryptophan coupling crosslinking, under blue light irradiation. Blue light irradiation facilitated an efficient electron transfer reaction between FMN− and persulfate, owing to their suitable spectral compatibility and photoactivity. The resulting oxidizing free radicals and excited triplet state of FMN− served as initiating active species for the multiple-photocrosslinking reactions. The combination of FMN− and potassium persulfate (KPS) exhibited exceptional photoinitiation efficiency for various biomaterials, including silk fibroin, gelatin, poly(ethylene glycol) diacrylate, and carboxymethyl cellulose modified with amino acids. Furthermore, the cytocompatibility of the FMN−/KPS photoinitiator was demonstrated by the survival rates of 3T3-LI fibroblasts encapsulated in it, which exceeded 95 % when compared to a commercial initiator. Statement of significanceBy introducing persulfate, the photoinitiation efficiency of flavin mononucleotide was significantly improved. The application scenarios of flavin mononucleotide and persulfate combinations were also greatly extended, including radical photopolymerization, dityrosine, diphenylalanine, and ditryptophan coupling crosslinking. Among them, the coupling crosslinking of amino acids (di-phenylalanine, and di-tryptophan) modified carboxymethyl cellulose, to our knowledge, was first reported. The excellent cytocompatibility of cell encapsulation further proved that the combinations of flavin mononucleotide and persulfate have great potential in tissue engineering.

Towards safe phosphine oxides photoinitiators with good cytocompatibility for 3D printing of thermoplastics

Abstract3D printing is the technology of choice for the rapid production of objects with complex morphologies and controlled physical and chemical properties. 3D printing by photopolymerization is of great interest because of its ability to access very small scales and its high resolution. In the case of recent 3D printers, the preferred wavelength for light irradiation is 405 nm since it is a safe and energy‐economical irradiation. For 3D printing to be effective, it is therefore necessary to develop easily accessible, stable and highly efficient photoinitiating systems at the 405 nm wavelength. Beside, with the increasing use of photoinitiators, it is essential to develop structures with low cytotoxicity. Hence, the development of new photoinitiators is currently of major interest. To this end, the photochemical properties (triplet energy, bond dissociation energy, cleavage reaction enthalpy, and absorption properties) of several molecules have been calculated by molecular modeling and the most promising compounds have been synthesized. In this paper, four phosphine oxides photoinitiators (ADPO‐1, CPO‐2, CPO‐3, and FPO‐1) are synthesized and characterized. Subsequently, their absorption properties are measured and their efficiencies in photopolymerization under LED irradiation at 405 nm are evaluated. It is important to note that these structures have never been reported in 3D printing. Markedly, among the obtained photoinitiators, two of them show better efficiency than the commercially available and widely used phenylbis(2,4,6‐trimethylbenzoyl)phosphine oxide (BAPO) in photopolymerization (i.e., (Rp/[M0]) x100 values are 6.94, 12.95, and 4.93 s−1 for CPO‐2, ADPO‐1, and BAPO; with [M0] the initial acrylate function concentration). Furthermore, one of the synthesized photoinitiators is successfully used in 3D printing of thermoplastics for potential recycling ability. Finally, one of the obtained structures shows a lower cytotoxicity than the benchmark structure diphenyl(2,4,6‐trimethylbenzoyl)phosphine oxide (TPO).

Efficient red light polymerization facilitated by low energy excitation based on a single-atom substituted naphthalimide

Photoinduced polymerization with low-energy, longer wavelength light has attracted enormous attention in material/biological applications owing to its unique advantages of greener and deep curing compared to conventional harsh UV-triggered polymerization. However, the low-energy polymerization methods often rely on heavy atom-containing sensitizers or suffer from the slow solidification process, which restricts their applicability in several areas. Herein we construct a novel efficient photoinitiating system based on a single-atom substituted pure organic triplet photosensitizer, prepared from a common naphthalimide chromophore through a simple one-pot process, and exemplified its potential to enable the efficient and rapid polymerization (just a few tens of seconds) of acrylate upon low-intensity (0.36 W/cm2) red-light illumination. We show that the single atom replacement (oxygen with sulfur) can redshift the absorption profile of naphthalimide chromophore over 150 nm and also effectively promotes its intersystem crossing efficiency (from 0 to 86.4%). For the first time, the thionaphthalimide (NIS) was introduced in triplet-triplet annihilation upconversion, showing a high upconversion quantum yield of (4.4–12.9%) with a large anti-Stokes shift (0.65–0.80 eV) in various solvents. We successfully employed the upconverted annihilator's singlet to trigger the photoinitiator via Förster resonance energy transfer (FRET) for polymerization. Furthermore, this photoinitiating system is found to be effective enough to be operable under sunlight illumination and useful for the fabrication of high-quality flexible products via photolithography approach. Thus, our results are beneficial for the future design of eco-friendly, low-energy activated chemical conversion systems.

Photoactivable alizarin and eugenol-based materials for antibacterial applications

We report herein the design of a new visible-light epoxy-based alizarin photosensitizer (AE) of iodonium salt (Iod) for the cationic polymerization (CP) of epoxidized eugenol monomers under visible-light irradiation. The combination of AE and Iod demonstrates highly efficient photoinitiating properties under air. As highlighted by fluorescence, laser flash photolysis (LFP) and electron paramagnetic resonance spin-trapping (ESR ST) experiments, AE acts as an electron donating molecule, and reacts with Iod under light exposure through its excited singlet and triplet states via a photoinduced electron transfer reaction, producing thus protonic acids, H+, able to initiate CP. Also, we demonstrate by EPR ST that the addition of diepoxy eugenol monomer may lead to the formation of reactive radical species which may be oxidized by Iod to form cationic species. Thus, new bio-based and photoactivable materials were designed by cationic photopolymerization with the use of alizarin-based photosensitizer and eugenol derived monomers. By tuning the weight proportion of eugenol derived epoxy monomers (mono- (EE) and di-epoxidized (EdE) eugenol), we can modulate the thermal and mechanical properties of the resulting materials. The new AE-based materials have demonstrated two interesting properties: first, the presence of EE in the polymer network has considerably decreased the number of colony forming units (CFUs) at the surface of materials whatever the bacterial strains used, and these samples demonstrate photoactivable properties as they produce, under visible-light irradiation, singlet oxygen, a biocide agent against bacteria. Interestingly, the irradiation of the AE/Iod/EE(50)/EdE(50) materials lead to a tremendous decrease of the number of E. coli and S. aureus CFUs at their surface. A reduction by 100% of the bacterial adhesion is observed upon visible-light exposure.

3D-VAT printing of nanocomposites by photopolymerisation processes using amino-meta-terphenyls as visible light-absorbing photoinitiators

ABSTRACT In this article, the application of 10 new amino-m-terphenyls in 3D-VAT printing was described. New compounds have specially designed D-π-A structure, where the central phenyl ring with nitrile and amino groups is the acceptor and the modifiable amino group is donor. Such design eliminates problem with acid scavenging and guaranteed desire properties and photoactivity as well as it allows further development of such system for 3D-VAT printing. Efficient excitation with intramolecular charge transfer provides excellent absorption and electrochemical properties, which can be tuned by modification of the amino group. The design allows photoinitiation of free radical, hybrid and especially cationic polymerisation even at 455 nm with more than 70% of monomer conversion. Such properties allow to use the developed compounds as efficient visible light photoinitiators for 3D printing of nanocomposite materials. The terphenyls can efficiently cure resins containing CuO and Al2O3 nano additives leading to high-resolution 3D prints.