Efficient Oxygen Reduction Reaction Research Articles

Construction of Conjugated Organic Polymers for Efficient Photocatalytic Hydrogen Peroxide Generation with Adequate Utilization of Water Oxidation.

The visible-light-driven photocatalytic production of hydrogen peroxide (H2O2) is currently an emerging approach for transforming solar energy into chemical energy. In general, the photocatalytic process for producing H2O2 includes two pathways: the water oxidation reaction (WOR) and the oxygen reduction reaction (ORR). However, the utilization efficiency of ORR surpasses that of WOR, leading to a discrepancy with the low oxygen levels in natural water and thereby impeding their practical application. Herein, we report a novel donor-bridge-acceptor (D-B-A) organic polymer conjugated by the Sonogashira-Hagihara coupling reaction with tetraphenylethene (TPE) units as the electron donors, acetylene (A) as the connectors and pyrene (P) moieties as the electron acceptors. Notably, the resulting TPE-A-P exhibits a remarkable solar-to-chemical conversion of 1.65% and a high BET-specific surface area (1132 m2·g-1). Furthermore, even under anaerobic conditions, it demonstrates an impressive H2O2 photosynthetic efficiency of 1770 μmol g-1 h-1, exceeding the vast majority of previously reported photosynthetic systems of H2O2. The outstanding performance is attributed to the effective separation of electrons and holes, along with the presence of sufficient reaction sites facilitated by the incorporation of alkynyl electronic bridges. This protocol presents a successful method for generating H2O2 via a water oxidation reaction, signifying a significant advancement towards practical applications in the natural environment.

Heteroatom Sulfur-Modified ZIF-8 Derived Zn, N Co-Doped Carbon Nanocages as Highly Efficient ORR Catalysts for Zn-Air Batteries

Carbon-based electrocatalysts derived from zeolitic imidazolate framework-8 (ZIF-8) have garnered significant attention, owing to their structural advantages, high surface area, and tunable active sites. Herein, we report the synthesis of heteroatom sulfur (S) modified ZIF-8 derived carbon nanocages (ZnS@N/S-C) for oxygen electrocatalysis through self-assembly and two-step pyrolysis. The resultant ZnS@N/S-C exhibits catalytic activity towards oxygen reduction reaction (ORR) with high half-wave potential (0.86 V) and stability (91.4%), separately, which is comparable to or superior to Pt/C. Furthermore, the application of ZnS@N/S-C as a cathode for Zn-air batteries (ZABs) demonstrates performance metrics such as an open-circuit voltage of 1.407 V, a power density of 114.4 mW cm−2, and a specific capacity of 764.6 mAh gZn −1, etc surpassing Pt/C. The performance of ZnS@N/S-C can be attributed to the fact that the introduction of S significantly increases the specific surface area, pore volume, and defect extent of the catalyst, while optimizing the electronic structure and generating ZnS active nanocrystals. This work employs a simple sulfurization strategy to enhance the ORR activity of ZIF-8-derived Zn-based catalysts with fully filled 3d orbitals, providing guidance for the development of such materials.

Core-shell Co-NC@NC nanomaterial for efficient oxygen reduction reaction

Transition metal and nitrogen doped carbons (M-N-C) catalysts present significant potential as substitutes for platinum-carbon (Pt/C) in catalyzing oxygen reduction reaction (ORR). Hence, we employ an epitaxial growth strategy to prepare Zn/Co-ZIF@ZIF-8 crystals with core-shell structure. Subsequent pyrolysis and acid etching produce highly porous cobalt-doped nitrogen materials for ORR investigation. The resulting Co-NC@NC catalyst demonstrates a graded porous structure alongside remarkable conductivity, possessing a specific surface area measuring 623 m2 g−1. It showcases heightened ORR activity with a half-wave potential (E1/2) of 0.886 V, superior kinetic performance (illustrated by an extremely low Tafel slope measuring 45.98 mV/dec), and strengthened stability (with mere 25 mV day after 40,000 cycles) when contrast with Pt/C catalysts in 0.1 M KOH. Additionally, it exhibits notable activity and stability in acidic environments. These remarkable attributes are attributable to the graded structure, which facilitates rapid mass transfer, a high electrochemically active area that exposes highly dispersed active sites, and a conductive carbon skeleton network that promotes electron transfer.

Inhibiting Demetalation of Fe-N-C via Mn Sites for Efficient Oxygen Reduction Reaction in Zinc-Air Batteries.

Demetalation caused by the electrochemical dissolution of metallic Fe atoms is a major challenge for the practical application of Fe-N-C catalysts. Herein, we construct an efficient single metallic Mn active site to improve the strength of the Fe-N bond, inhibiting the demetalation effect of Fe-N-C. Mn acts as an electron donor inducing more delocalized electrons to reduce the oxidation state of Fe by increasing the electron density, thereby enhancing the Fe-N bond and inhibiting the electrochemical dissolution of Fe. The ORR pathway for the dissociation of Fe-Mn dual sites can overcome the high energy barriers to direct O-O bond dissociation and modulate the electronic states of Fe-N4 sites. The resulting FeMn-N-C exhibits excellent ORR activity with a high half-wave potential (E1/2) of 0.92V in alkaline electrolytes. FeMn-N-C as a cathode catalyst for Zn-air batteries (ZABs) has a cycle stability of 700h at 25°C and a long cycle stability of more than 210h under extremely cold conditions at -40°C. These findings contribute to the development of efficient and stable metal-nitrogen-carbon catalysts for various energy devices. This article is protected by copyright. All rights reserved.

Cobalt/nitrogen doped hollow carbon sphere-bamboo like carbon nanotube for highly efficient oxygen reduction reaction

The exploration of non-Pt catalysts with high electrocatalytic activity and durability is especially important for cathodic oxygen reduction reaction (ORR) in fuel cell. Here, cobalt and nitrogen doped hollow carbon sphere-bamboo like carbon nanotube (Co/NHCS-BCNT) is prepared by using SiO2 sphere as sacrificial template. Co nanoparticles are confined in the cavity and top end of the in-situ formed BCNT, which can not only avoid the agglomeration of Co nanoparticles but also inhibit corrosion in caustic electrolyte. The synergistic effect between NHCS and well-dispersed Co particles makes Co/NHCS-BCNT have superior catalytic activity toward ORR. The electrochemical surface area (ECSA) of Co/NHCS-BCNT is 222 cm2, which is higher than those of NHCS (164 cm2) and HCS (135 cm2). The onset potential and half-wave potential of Co/NHCS-BCNT are 0.941 V and 0.814 V, respectively, which are close to commercial Pt/C (0.949 V, 0.807 V). The Tafel slope of Co/NHCS-BCNT (63.8 mV dec-1) is lower than that of Pt/C (71.7 mV dec-1). In addition, Co/NHCS-BCNT shows excellent durability and fuel selectivity.

Tailoring Zirconia Supported Intermetallic Platinum Alloy via Reactive Metal-Support Interactions for High-Performing Fuel Cells.

Developing efficient and anti-corrosive oxygen reduction reaction (ORR) catalysts is of great importance for the applications of proton exchange membrane fuel cells (PEMFCs). Herein, we report a novel approach to prepare metal oxides supported intermetallic Pt alloy nanoparticles (NPs) via the reactive metal-support interaction (RMSI) as ORR catalysts, using Ni-doped cubic ZrO2 (Ni/ZrO2) supported L10-PtNi NPs as a proof of concept. Benefiting from the Ni migration during RMSI, the oxygen vacancy concentrations in the support are increased, leading to an electron enrichment of Pt. The optimal L10-PtNi-Ni/ZrO2-RMSI catalyst achieves remarkably low mass activity (MA) loss (17.8 %) after 400,000 accelerated durability test cycles in a half-cell and exceptional PEMFC performance (MA=0.76 A mgPt -1 at 0.9 V, peak power density=1.52/0.92 W cm-2 in H2-O2/-air, and 18.4 % MA decay after 30,000 cycles), representing the best reported Pt-based ORR catalysts without carbon supports. Density functional theory (DFT) calculations reveal that L10-PtNi-Ni/ZrO2-RMSI requires a lower energetic barrier for ORR than L10-PtNi-Ni/ZrO2 (direct loading), which is ascribed to a decreased Bader charge transfer between Pt and *OH, and the improved stability of L10-PtNi-Ni/ZrO2-RMSI compared to L10-PtNi-C can be contributed to the increased adhesion energy and Ni vacancy formation energy within the PtNi alloy.

Reactivity and Durability of Covalent Organic Frameworks Derived Co‐based Hybrid Bifunctional Electrocatalysts for Zinc‐Air Batteries

Developing bifunctional non‐precious metal electrocatalysts of superior reactivity and durability is essential. Herein, we report a class of phthalocyanine‐based covalent organic frameworks as self‐sacrificial precursors derived Co‐based hybrid electrocatalysts for oxygen reduction reaction (ORR) and oxygen evolution reaction (OER). The fabricated Co‐COFs/CNT‐700 catalysts displayed highly efficient ORR properties with a half‐potential of 0.83 V, while its half‐wave potential in alkaline solution at a current density of 10 mA cm‐2 is 1.70 V in the OER test, reflecting exceptional OER activity. Moreover, zinc‐air batteries assembled with Co‐COFs/CNT‐700 catalysts exhibit a marginally higher power density (114 mW cm2) than traditional Pt/C‐IrO2 batteries in an air atmosphere, along with an enhanced cycling stability (5.1% potential loss after 65 h). This work may pave a facile and efficient approach for fabricating electrocatalytic materials with controllably introduced metals and heteroatoms.

Regulating the surface Pt coordination environment in the PtN overlayers on PtCuN hollow nanospheres for efficient oxygen reduction reaction

Engineering the surface Pt coordination environment is a promising strategy for promoting the kinetically sluggish oxygen reduction reaction (ORR) on Pt-based catalysts. In this study, we achieve the compressive strain effect and electronic effect by Cu and N co-doping to synthesize the PtCuN hollow nanospheres with PtN overlayers (PtCuN@PtN HNSs) using a facile solvothermal synthesis. Electrochemical investigations show that the constructed disordered Pt–N coordination structures effectively facilitate the ORR and stabilize Pt atoms in the compressed lattice, whereas an excessive N-doping can lead to the formation of a structurally unstable Pt nitride phase. Theoretical analyses confirm that the oxygen reduction kinetics on the compressed PtN overlayers are regulated by a synergistic effect resulting from N-doping and lattice compression, circumventing the traditional linear scaling relationships (LSR). The optimized PtCuN@PtN HNSs, with the composition of PtCu0.29N1.1, demonstrate an area-specific activity of 1.98 mA cm–2 and a mass-specific activity of 1.81 A mgPt–1.

Main Group SnN4O Single Sites with Optimized Charge Distribution for Boosting the Oxygen Reduction Reaction.

Transition metal single-atom catalysts (SACs) have been regarded as possible alternatives to platinum-based materials due to their satisfactory performance of the oxygen reduction reaction (ORR). By contrast, main-group metal elements are rarely studied due to their unfavorable surface and electronic states. Herein, a main-group Sn-based SAC with penta-coordinated and asymmetric first-shell ligands is reported as an efficient and robust ORR catalyst. The introduction of the vertical oxygen atom breaks the symmetric charge balance, modulating the binding strength to oxygen intermediates and decreasing the energy barrier for the ORR process. As expected, the prepared Sn SAC exhibits outstanding ORR activity with a high half-wave potential of 0.912 V (vs RHE) and an excellent mass activity of 13.1 A mgSn-1 at 0.850 V (vs RHE), which surpasses that of commercial Pt/C and most reported transition-metal-based SACs. Additionally, the reported Sn SAC shows excellent ORR stability due to the strong interaction between Sn sites and the carbon support with oxygen atom as the bridge. The excellent ORR performance of Sn SAC was also proven by both liquid- and solid-state zinc-air battery (ZAB) measurements, indicating its great potential in practical applications.

Thermodynamics of Proton-Coupled Electron Transfer at Tricopper μ-Oxo/Hydroxo/Aqua Complexes.

Multicopper oxidases (MCOs) utilize a tricopper active site to reduce dioxygen to water through 4H+ 4e- proton-coupled electron transfer (PCET). Understanding the thermodynamics of PCET at a tricopper cluster is essential for elucidating how MCOs harness the oxidative power of O2 while mitigating oxidative damage. In this study, we determined the O-H bond dissociation free energies (BDFEs) and pKa values of a series of tricopper hydroxo and tricopper aqua complexes as synthetic models of the tricopper site in MCOs. Tricopper intermediates on the path of alternating electron and proton transfer (ET-PT-ET-PT-ET) have modest BDFE(O-H) values in the range of 53.0-57.1 kcal/mol. In contrast, those not on the path of ET-PT-ET-PT-ET display much higher (78.1 kcal/mol) or lower (44.7 kcal/mol) BDFE(O-H) values. Additionally, the pKa of bridging OH and OH2 motifs increase by 8-16 pKa units per oxidation state. The same oxidation state changes have a lesser impact on the pKa of N-H motif in the secondary coordination sphere, with an increase of ca. 5 pKa units per oxidation state. The steeper pKa increase of the tricopper center promotes proton transfer from the secondary coordination sphere. Overall, our study shed light on the PCET pathway least prone to decomposition, elucidating why tricopper centers are an optimal choice for promoting efficient oxygen reduction reaction.

Coordination-environment regulation of atomic Co-Mn dual-sites for efficient oxygen reduction reaction

Coordination-environment regulation of atomic Co-Mn dual-sites for efficient oxygen reduction reaction

Electronic Structure Engineering of Pt-Ni Alloy NPs by Coupling of Gold Single Atoms on N-Doped Carbon for Highly Efficient Oxygen Reduction Reaction and Hydrogen Evolution Reaction.

Improving the catalytic activity and durability of platinum-based alloy catalysts remains a formidable challenge in the context of renewable energy electrolysis applications. Herein, a facile and rapid photochemical deposition strategy for the synthesis of gold single atoms (Au SAs) anchored on N-doped carbon is presented. These Au SAs serve as a charge redistribution support for Pt-Ni alloy nanoparticles (PtNiNPs/AuSA-NDC), creating an extended electron-donating interface with Pt-Ni alloy sites. Consequently, the PtNiNPs/AuSA-NDC hybrid catalyst manifests exceptional catalytic performance and durability in both the oxygen reduction reaction (ORR) and hydrogen evolution reaction (HER) under acidic conditions. Specifically, in ORR, it exhibits a half-wave potential (0.92V vs RHE), with a mass activity 20.4 times superior to Pt/C at 0.9V. In HER, PtNiNPs/AuSA-NDC demonstrates a notably reduced overpotential of 19.1mV vs RHE at 10mAcm-2 and a mass activity 38 times higher than Pt/C (at 0.25mV). Furthermore, this hybrid catalyst displays outstanding durability, with only an 8.0mV decay observed for ORR and a 6.9mV decay for HER after 10000 cycles. Theoretical calculations provide insight into the mechanism, demonstrating that isolated Au sites effectively modulate the electronic structure of Pt-Ni alloy sites, facilitating intermediate adsorption and enhancing reaction kinetics.

Carbon‐Embedded Pt Alloy Cluster Catalysts for Proton Exchange Membrane Fuel Cells

AbstractMinimizing the use of platinum (Pt) in proton exchange membrane fuel cells (PEMFCs) is crucial for expanding the PEMFC market. The most straightforward approach would be to reduce the size of Pt particles. However, small Pt clusters, particularly those <2 nm in size, typically exhibit reduced activity for the oxygen reduction reaction (ORR) due to the overly strong adsorption of oxygen intermediates. Additionally, these small Pt clusters tend to degrade more quickly, resulting in lower durability. In this study, carbon‐embedded Pt alloy cluster catalysts (PtFe, PtCo, PtNi) that demonstrate high activity and durability in the PEMFC cathode are presented. Density functional theory calculations indicate that carbon atoms stably adsorb onto the Fe sites of PtFe clusters, making the neighboring Pt sites active for ORR with an optimal adsorption strength for oxygen intermediates. This research can pave the way for developing durable and efficient ORR catalysts while significantly reducing Pt usage in PEMFCs.

Two-Dimensional Leafy Fe/N-Doped Carbon Nanomaterials Derived from Vitamin C-Modified ZIF-L for Efficient Oxygen Reduction Reaction

Two-Dimensional Leafy Fe/N-Doped Carbon Nanomaterials Derived from Vitamin C-Modified ZIF-L for Efficient Oxygen Reduction Reaction

Resonant structure substrate anchors Pt to form ordered alloys for efficient oxygen reduction reaction

Platinum-based ordered alloys have excellent catalytic performance for the cathodic oxygen reduction reaction (ORR) in fuel cells. However, these alloys exhibit a lower degree of ordering and larger crystal grains after heat treatment. Herein, a series of cyanamide group molecules (cyanamide, dicyandiamide, melamine) was employed as substrates to modify Pt-based alloys by promoting the binding between metal ions, leading to the preparation of ∼ 4 nm PtM (M = Co, Fe, Ni) ordered alloys after heat treatment. Among them, the PtCo ordered alloy prepared using hydrolyzed cyanamide with a unique resonance structure exhibits a high degree of order (93.1 %), and its mass activity of 0.915 A mgPt-1 at 0.9 V is superior to that of Pt/C. The theoretically calculated adsorption energies of these alloys demonstrate that the resonance structure of the cyanamide substrate is beneficial for alloy formation, thereby facilitating ordered alloy synthesis.

Single-atom Fe catalysts with pyrrolic-type FeN4 sites for efficient oxygen reduction reaction: Identifying the roles of different N species

Developing electrocatalysts with efficient cathode oxygen reduction reaction (ORR), for example, iron-based single-atom catalysts (Fe-SACs), has been deemed necessary to accelerate the commercialisation process of zinc (Zn)–air batteries. Nevertheless, determining how various nitrogen species and active metal centres coordinate on an atomic scale remains unclear and inadequately explained. Herein, we demonstrate a soft-template-aided technique using Fe-containing molecules (e.g. iron phthalocyanine [FePc], Fe-1,10-phenanthroline [Fe-Phen] and Fe-glucose) to enhance the performance of Fe-SACs in terms of ORR. In this technique, FePc molecules can be converted into atomically dispersed pyrrolic-type iron–nitrogen (FeN4) sites during a pyrolytic process. The resultant catalyst exhibits excellent ORR activity (half-wave potential = 0.90 V) in alkaline medium and standing battery performance when used in Zn–air batteries (peak power density = 197.3 mW cm−2 and specific capacity = 796.2 mAh g−1). As per the findings from control experiments and characterisation studies, electron transfer between the support and the active Fe centre amplifies the ORR performance. Theoretical calculations substantiate that Fe sites coordinated with pyrrolic N atoms govern the electronic configuration of the catalysis, reducing the free energy absorption of reaction intermediates and thus increasing its intrinsic ORR capability. Herein, we aim to offer a fresh perspective on the relation between coordination environments and catalytic activity in ORR catalysts.

Nickel adsorbed algae biochar based oxygen reduction reaction catalyst

Lately, the bio electrochemical systems are emerging as an efficient wastewater treatment and energy conversion technology. However, their scaling-up is considerably restrained by slow-rate of cathodic oxygen reduction reaction (ORR) or otherwise by the high cost associated with the available efficient ORR catalysts. In this investigation, a cost-effective and eco-friendly approach for synthesizing Ni based ORR catalyst utilizing biosorption property of microalgae is accomplished. The synthesised Ni adsorbed algal biochar (NAB) served as an efficient cathode catalyst for enhancing ORR in a microbial carbon-capture cell (MCC). On increasing the initial concentration of Ni2+ in the aqueous medium from 100 mgL−1 to 500 mgL−1, the biosorption capacity was found to increase from 3 mgg−1 to 32 mgg−1 of algae cell. The MCC operated with NAB based cathode catalyst loading of 2 mgcm-2 exhibited 3.5 times higher power density (4.69 Wm−3) as compared to the one with commercial activated carbon. A significant organic matter removal (82 %) in the anodic chamber with simultaneous algal biomass productivity in the cathodic chamber was attained by MCC with cathode loaded with 2 mgcm−2 of NAB. Hence, this easily synthesised low-cost catalyst, out of waste stream, proved its ability to improve the performance of MCC.

Well-dispersed Pt/Nb2O5 on zeolitic imidazolate framework derived nitrogen-doped carbon for efficient oxygen reduction reaction

In this work, an advanced hybrid material was constructed by incorporating niobium pentoxide (Nb2O5) nanocrystals with nitrogen-doped carbon (NC) derived from ZIF-8 dodecahedrons, serving as a support, referred to as Nb2O5/NC. Pt nanocrystals were dispersed onto Nb2O5/NC using a simple impregnation reduction method. The obtained Pt/Nb2O5/NC electrocatalyst showed high oxygen reduction reaction (ORR) activity due to three-phase mutual contacting structure with well-dispersed Pt and Nb2O5 NPs. In addition, the conductive NC benefits electron transfer, while the induced Nb2O5 can regulate the electronic structure of Pt element and anchor Pt nanocrystals, thereby enhancing the ORR activity and stability. The half-wave potential (E 1/2) for Pt/Nb2O5/NC is 0.886 V, which is higher than that of Pt/NC (E 1/2 = 0.826 V). The stability examinations demonstrated that Pt/Nb2O5/NC exhibited higher electrocatalytic durability than Pt/NC. Our work provides a new direction for synthesis and structural design of precious metal/oxides hybrid electrocatalysts.

Construction of Cu Single‐Atom Catalysts by Taking Spatial‐Confinement and Chemical‐Anchoring Effect of Hyperbranched Phthalocyanine Copper for Efficient Oxygen Reduction Reaction

AbstractAtomically dispersed nonprecious metal‐based catalysts have been considered as the most promising alternatives to Pt‐based catalysts since their excellent catalytic activities and almost 100 % atom utilization in oxygen reduction reaction. However, the agglomeration of metal atoms is unavoidable during pyrolysis process, thus leads to the decrease of electrocatalytic performance. Herein, hyperbranched phthalocyanine copper (HCuPc) wrapping nano‐silica is synthesized via in situ polymerization and served as precursor for preparing atomically dispersed Cu−N−C electrocatalysts. Owing to the confinement effect of chemical‐anchoring and spatial‐hindrance, the migration and agglomeration of Cu atoms are restricted in carbonization process. The aberration‐corrected high‐angle annular dark‐field scanning transmission electron microscopy and X‐ray photoelectron spectroscopy (XPS) are performed to confirm the atomically dispersed of as‐synthesized catalyst, which is labelled as HCu−N−C/SiO2. In addition, the HCu−N−C/SiO2 possess superior ORR electrocatalytic activities with a half‐wave potential of 0.874 V vs RHE and a limiting current density of 5.7 mA cm−2. The zinc‐air batteries assembled with HCu−N−C/SiO2 catalyst exhibit a high specific capacity of 789 mAh g−1 as well as a maximum discharge power density of 176 mW cm−2. This work proves that hyperbranched phthalocyanine structure could be a useful confined framework to the fabrication of singles‐atom catalysts.

Theoretical designs of ORR/OER single‐atom catalysts TM@Ti2CT2 (T = O, S, Cl)

AbstractDriven by the goal of establishing a fossil‐fuel‐free and nuclear‐power‐free economy based on renewable energy, metal‐air batteries are regarded as promising energy conversion and storage devices. Developing efficient oxygen reduction reaction (ORR)/oxygen evolution reaction (OER) bifunctional electrocatalysts for the air electrode of metal‐air batteries is becoming increasingly important. In this work, 36 transition metal (TM) single‐atom catalysts are designed based on MXenes Ti2CT2 with different surface terminal atoms (T = O, S, Cl), and their ORR/OER catalytic activity and stability are evaluated by the density functional theory. Ni@Ti2CO2, Pd@Ti2CS2, and Co@Ti2CCl2 are found to exhibit good catalytic activity with ORR/OER overpotentials of .54 V/.62 V, .59 V/.29 V, .44 V/.40 V. The aggregation behavior of three catalysts is estimated by comparing the average binding energy of one, two, three, and four TM atoms anchored on Ti2CT2. This work cannot only provide a theoretical guide to develop bifunctional single‐atom catalysts, but also help us understand the effect of terminal atoms on the electronic structures and catalytic activity of TM@Ti2CT2.