Efficient Electrocatalyst For Oxygen Evolution Reaction Research Articles

Co-deposition of different mixed nanoparticle concentrations with nickel as efficient OER electrocatalysts in alkaline media

The catalytic efficiency of water electrolysis is directly affected by the oxygen evolution reaction (OER). DFT simulation was used to calculate the doping of SiC nanoparticles into Ni–Co alloys. The results indicate that doping nano SiC particles enhances the intrinsic activity of Ni–Co–SiC in OER by introducing a separate RDS at each of the four reaction sites. Then, magnetic field-induced jet electrodeposition was used to manufacture Ni–Co–SiC catalytic electrodes. To obtain a larger specific surface area of the micro/nano structure, nickel nanoparticles, and SiC nanoparticles were mixed in the form of mixed nanoparticles and then added to the electrolyte. The effect of mixed nanoparticle concentration on OER performance of Ni–Co–SiC catalytic electrodes was investigated. Research showed that the Ni–Co–SiC catalytic electrode exhibits micro/nano dense cellular protrusion structures with higher surface roughness with a magnetic field. OER performance of the Ni–Co–SiC catalytic electrode further increased with the concentration of nanoparticles, the catalytic electrode has excellent catalytic performance when the concentration of mixed nanoparticles reaches 6 g/L in the electrolyte. The overpotential of the Ni–Co–SiC/Ni catalytic electrode decreased to 309 mV, and the Tafel slope was 54.5 mV/dec.

Extraordinary Structural Reconstruction of Nanolaminated Ta2FeC MAX Phase for Enhanced Oxygen Evolution Performance.

Renewable energy technologies, such as water splitting, heavily depend on the oxygen evolution reaction (OER). Nanolaminated ternary compounds, referred to as MAX phases, show great promise for creating efficient electrocatalysts for OER. However, their limited intrinsic oxidative resistance hinders the utilization of conductivity in Mn+1Xn layers, leading to reduced activity. In this study, a method is proposed to improve the poor inoxidizability of MAX phases by carefully adjusting the elemental composition between Mn+1Xn layers and single-atom-thick A layers. The resulting Ta2FeC catalyst demonstrates superior performance compared to conventional Fe/C-based catalysts with a remarkable record-low overpotential of 247mV (@10mA cm-2) and sustained activity for over 240h. Notably, during OER processing, the single-atom-thick Fe layer undergoes self-reconstruction and enrichment from the interior of the Ta2FeC MAX phase toward its surface, forming a Ta2FeC@Ta2C@FeOOH heterostructure. Through density functional theory (DFT) calculations, this study has found that the incorporation of Ta2FeC@Ta2C not only enhances the conductivity of FeOOH but also reduces the covalency of Fe─O bonds, thus alleviating the oxidation of Fe3+ and O2-. This implies that the Ta2FeC@Ta2C@FeOOH heterostructure experiences less lattice oxygen loss during the OER process compared to pure FeOOH, leading to significantly improved stability. These results highlight promising avenues for further exploration of MAX phases by strategically engineering M- and A-site engineering through multi-metal substitution, to develop M2AX@M2X@AOOH-based catalysts for oxygen evolution.

Balance between FeIV-NiIV synergy and Lattice Oxygen Contribution for Accelerating Water Oxidation.

Hydrogen obtained from electrochemical water splitting is the most promising clean energy carrier, which is hindered by the sluggish kinetics of the oxygen evolution reaction (OER). Thus, the development of an efficient OER electrocatalyst using nonprecious 3d transition elements is desirable. Multielement synergistic effect and lattice oxygen oxidation are two well-known mechanisms to enhance the OER activity of catalysts. The latter is generally related to the high valence state of 3d transition elements leading to structural destabilization under the OER condition. We have found that Al doping in nanosheet Ni-Fe hydroxide exhibits 2-fold advantage: (1) a strong enhanced OER activity from 277 mV to 238 mV at 10 mA cm-2 as the Ni valence state increases from Ni3.58+ to Ni3.79+ observed from in situ X-ray absorption spectra. (2) Operational stability is strengthened, while weakness is expected since the increased NiIV content with 3d8L2 (L denotes O 2p hole) would lead to structural instability. This contradiction is attributed to a reduced lattice oxygen contribution to the OER upon Al doping, as verified through in situ Raman spectroscopy, while the enhanced OER activity is interpreted as an enormous gain in exchange energy of FeIV-NiIV, facilitated by their intersite hopping. This study reveals a mechanism of Fe-Ni synergy effect to enhance OER activity and simultaneously to strengthen operational stability by suppressing the contribution of lattice oxygen.

Metal Doping Regulates Electrocatalysts Restructuring during Oxygen Evolution Reaction.

High-efficiency and low-cost catalysts for oxygen evolution reaction (OER) are critical for electrochemical water splitting to generate hydrogen, which is a clean fuel for sustainable energy conversion and storage. Among the emerging OER catalysts, transition metal dichalcogenides have exhibited superior activity compared to commercial standards such as RuO2, but inferior stability due to uncontrolled restructuring with OER. In this study, we create bimetallic sulfide catalysts by adapting the atomic ratio of Ni and Co in CoxNi1-xSy electrocatalysts to investigate the intricate restructuring processes. Surface-sensitive X-ray photoelectron spectroscopy and bulk-sensitive X-ray absorption spectroscopy confirmed the favorable restructuring of transition metal sulfide material following OER processes. Our results indicate that a small amount of Ni substitution can reshape the Co local electronic structure, which regulates the restructuring process to optimize the balance between OER activity and stability. This work represents a significant advancement in the development of efficient and noble metal-free OER electrocatalysts through a doping-regulated restructuring approach.

Substantial Electrocatalytic Oxygen Evolution Performances of Activated Carbon-Decorated Vanadium Pentoxide Nanocomposites

Developing the ecofriendly and high-fidelity electrocatalysts for the oxygen evolution reaction (OER) is essential to foster effective production of environmentally friendly hydrogen. Herein, we fabricated the highly efficient OER electrocatalysts of the activated carbon-decorated vanadium pentoxide (AC-V2O5) nanocomposites using a facile hydrothermal technique. The AC-V2O5 nanocomposites displayed an aggregated structure of the AC nano-sheet-anchored orthorhombic V2O5 nanorods. When performing the OER process in an alkaline electrolyte at 10 mA/cm2, AC-V2O5 exhibited the low overpotential (~230 mV), small Tafel slope (~54 mV/dec), and excellent stability. These substantial OER performances of AC-V2O5 could be ascribed to the synergistic effects from both the electrochemically active V2O5 nanorods and the highly conductive AC nanosheets. The results infer that the AC-V2O5 nanocomposites possess a substantial aptitude as a high-performance OER electrocatalyst for production of the future green energy source—hydrogen.

Shape-Preserved CoFeNi-MOF/NF Exhibiting Superior Performance for Overall Water Splitting across Alkaline and Neutral Conditions.

This study reported a multi-functional Co0.45Fe0.45Ni0.9-MOF/NF catalyst for oxygen evolution reaction (OER), hydrogen evolution reaction (HER), and overall water splitting, which was synthesized via a novel shape-preserving two-step hydrothermal method. The resulting bowknot flake structure on NF enhanced the exposure of active sites, fostering a superior electrocatalytic surface, and the synergistic effect between Co, Fe, and Ni enhanced the catalytic activity of the active site. In an alkaline environment, the catalyst exhibited impressive overpotentials of 244 mV and 287 mV at current densities of 50 mA cm-2 and 100 mA cm-2, respectively. Transitioning to a neutral environment, an overpotential of 505 mV at a current density of 10 mA cm-2 was achieved with the same catalyst, showing a superior property compared to similar catalysts. Furthermore, it was demonstrated that Co0.45Fe0.45Ni0.9-MOF/NF shows versatility as a bifunctional catalyst, excelling in both OER and HER, as well as overall water splitting. The innovative shape-preserving synthesis method presented in this study offers a facile method to develop an efficient electrocatalyst for OER under both alkaline and neutral conditions, which makes it a promising catalyst for hydrogen production by water splitting.

Co-doped NiFe carbonate hydroxide hydrate nanosheets with edge effect constructed from spent lithium-ion battery ternary cathodes for oxygen evolution reaction

The recycling of spent lithium-ion batteries (LIBs) has received increasing attention for environment and resource reclamation. Converting LIBs wastes into high-efficiency catalysts is a win-win strategy for realizing resource reclamation and addressing sustainable energy challenges. Herein, we developed a simple method to upcycle spent-LIBs cathode powder into Co-doped NiFe carbonate hydroxide hydrate (Co/NFCH-FF) as a low-cost and efficient oxygen evolution reaction (OER) electrocatalyst. The optimized Co/NFCH-FF electrode appears very competitive OER performances with low overpotentials of 201 and 249 mV at 10 and 100 mA cm−2, respectively, a small Tafel slope of 48.4 mV dec−1, and a high long-term stability. Moreover, we reveal that the existence of Co atoms leads to the formation of a crystalline/amorphous (c/a) interface at the Co/NFCH nanosheet edge, inducing the nanosheets possess a unique edge effect to enhance electric fields and accumulate hydroxide ions (OH–) at the edge during the OER process. Benefiting from edge effect, Co/NFCH-FF shows outstanding intrinsic activity. Furthermore, Co atoms as dopants stabilize the electronic structure of Co/NFCH-FF, enabling Co/NFCH-FF to exhibit excellent catalytic stability. This work provides an effective strategy for converting the end-life LIBs to high-performance multicomponent OER electrocatalysts and proposes new insights into the mechanism of enhanced catalytic activity of Co/NFCH.

Self-supported low-crystallinity CoFe layered double hydroxide nanospheres on monolayer Ti3C2 electrode for oxygen evolution reaction

The electrocatalytic oxygen evolution reaction is a crucial means to support the conversion and storage of the sustainable renewable energy. Low-crystallinity can offer short-range structural ordering and high active site density. In this work, an efficient self-supported oxygen evolution reaction (OER) electrocatalyst, cobalt iron layered double hydroxide (LDH) grown on Ti3C2 modified nickel foam (NF) heterostructure anode (CoFe-LDH/Ti3C2/NF) was prepared using electrodeposition. The exceptional electrocatalytic OER performance is ensured by in situ decorating monolayer Ti3C2/NF (s-Ti3C2/NF) with low-crystallinity CoFe nanospheres. By harnessing the low crystallinity, well-chosen composition and reasonable heterostructure, the overpotential of CoFe-LDH/Ti3C2/NF decreases to 246 mV at a current density of 10 mA·cm−2 in alkaline media. After 3000 cyclic voltammograms cycles, the ignorable increase in overpotential of 14 mV suggest the excellent long circular stability. Moreover, an accelerated reaction kinetics is implied by the smaller Tafel slope (28.76 mV·dec−1) and higher double-layer specific capacitance (2.33 mF·cm−2), which surpassed the counterparts CoFe-LDH grown on NF (CoFe-LDH/NF) and s-Ti3C2/NF. This work paves a new way to fabricate the low-crystallinity materials for electrocatalysis and energy storage.

CoFeBP Micro Flowers (MFs) for Highly Efficient Hydrogen Evolution Reaction and Oxygen Evolution Reaction Electrocatalysts.

Hydrogen is one of the most promising green energy alternatives due to its high gravimetric energy density, zero-carbon emissions, and other advantages. In this work, a CoFeBP micro-flower (MF) electrocatalyst is fabricated as an advanced water-splitting electrocatalyst by a hydrothermal approach for hydrogen production with the highly efficient hydrogen evolution reaction (HER) and oxygen evolution reaction (OER). The fabrication process of the CoFeBP MF electrocatalyst is systematically optimized by thorough investigations on various hydrothermal synthesis and post-annealing parameters. The best optimized CoFeBP MF electrode demonstrates HER/OER overpotentials of 20 mV and 219 mV at 20 mA/cm2. The CoFeBP MFs also exhibit a low 2-electrode (2-E) cell voltage of 1.60 V at 50 mA/cm2, which is comparable to the benchmark electrodes of Pt/C and RuO2. The CoFeBP MFs demonstrate excellent 2-E stability of over 100 h operation under harsh industrial operational conditions at 60 °C in 6 M KOH at a high current density of 1000 mA/cm2. The flower-like morphology can offer a largely increased electrochemical active surface area (ECSA), and systematic post-annealing can lead to improved crystallinity in CoFeBP MFs.

Microwave sintering construct 3D NiFeAl micro/nano porous bulk electrode for effective oxygen evolution reaction

The development of oxygen evolution reaction (OER) electrocatalysts is an important strategy to produce hydrogen energy by water splitting. Based on the Kirkendall effect and the capillary action of Al melting, this paper introduced a proper amount of Al into NiFe, and the 3D porous bulk high-efficiency OER electrodes were successfully prepared by microwave sintering. The 3D porous structure can provide abundant active sites for OER. The porous channel accelerates the penetration of O2 and electrolyte, shortens the diffusion path of reagents and products, and reduces the charge transfer resistance. It is worth noting that the NiFeAl porous bulk electrode shows excellent OER performance. The overpotentials are 205 mV and 251 mV at the current density of 10 mA cm−2 and 100 mA cm−2, respectively, and the Tafel slope is as low as 39.3 mV dec−1. Due to the existence of Al in the electrode and continuous etching and reconstruction in 1 M KOH solution, the stability test of the electrode lasts for more than 80 h, and the stability rate is even as high as 99.6%. In this work, a new view is put forward in developing an efficient and stable OER electrocatalysts for the preparation of transition metals.

Hollow-structured cobalt sulfide electrocatalyst for alkaline oxygen evolution reaction: Rational tuning of electronic structure using iron and fluorine dual-doping strategy

Utilizing renewable electricity for water electrolysis offers a promising way for generating high-purity hydrogen gases while mitigating the emission of environmental pollutants. To realize the water electrolysis, it is necessary to develop highly active and precious metal-free electrocatalyst for oxygen evolution reaction (OER) which incurs significant overpotential due to its complicated four-electron transfer mechanism. Hence, we propose a facile preparation method for hollow-structured Fe and F dual-doped CoS2 nanosphere (Fe-CoS2-F) as an efficient OER electrocatalyst. The uniform hollow and porous structure of Fe-CoS2-F enlarge the specific surface area and increase the number of exposed active sites. Furthermore, the Fe and F dual-dopants synergistically contributed to the adjustment of electronic structure, thereby promoting the adsorption/desorption of oxygen-containing reaction intermediates on active sites during the alkaline OER procedure. As a result, the prepared Fe-CoS2-F exhibits outstanding OER activity, characterized by a low overpotential of 298 mV to achieve a current density of 10 mA cm−2 and a Tafel slope as small as 46.0 mV dec−1. Based on computational theoretical calculations, the introduction of the dual-dopants into CoS2 structure reduce the excessively strong adsorption energy of reaction intermediate in the rate determining step, leading to effectively promoted electrocatalytic cycle for OER in alkaline environment. This study presents an effective strategy for preparing noble metal-free OER electrocatalysts with promising potential for large-scale industrial water electrolysis.

Lattice Oxygen Redox Mechanisms in the Alkaline Oxygen Evolution Reaction

AbstractUnderstanding of fundamental mechanism and kinetics of the oxygen evolution reaction (OER) is pivotal for designing efficient OER electrocatalysts owing to its key role in electrochemical energy conversion devices. In the past few years, the lattice oxygen oxidation mechanism (LOM) arising from the anodic redox chemistry has attracted significant attention as it involves a direct O─O coupling and thus bypasses thermodynamic limitations in the traditional adsorbate evolution mechanism (AEM). Transition metal‐based oxyhydroxides are generally acknowledged as the real catalytic phase in alkaline media. In particular, their low‐dimensional layered structures offer sufficient structural flexibility to trigger the LOM. Herein, a comprehensive overview is provided for recent advances in anion redox from LOM‐based electrocatalysts. Based on analyses of electronic structure of electrocatalysts and LOM, a strategy is proposed to activate LOM. Possible identification techniques for corroboration of the oxygen redox are also reviewed. In addition, the structural reconstruction process induced by the LOM is focused and the importance of multiple in situ/operando characterizations is highlighted to unveil the structural and chemical origins of the LOM. To conclude, a prospect on the remaining challenges and future opportunities for LOM electrocatalysts is presented.

Interface Engineering of Electrocatalysts for Efficient and Selective Oxygen Evolution in Alkaline/Seawater

Electrochemical water splitting is regarded as an effective technology for producing green hydrogen, which is crucial for addressing energy and environmental challenges. In particular, direct seawater splitting offers significant economic and environmental advantages. However, its efficiency is hindered by the high overpotential required for the oxygen evolution reaction (OER) and the competition from chloride oxidation. This review highlights the potential of interface engineering to overcome these limitations and develop efficient OER electrocatalysts. We comprehensively explore recent advancements in interface engineering for OER in both alkaline and seawater environments. We begin by introducing the mechanisms of freshwater and seawater electrolysis, emphasizing key considerations for OER catalyst design. Subsequently, we review the recent progress made in various interface engineering strategies, analyzing their impact on OER performance in both electrolytes. Finally, we outline promising future directions for developing efficient seawater oxidation catalysts through interface engineering.

Tuning Electrocatalytic Water Oxidation Activity: Insights from the Active-Site Distance in LnCu6 Clusters.

Atomically precise metal clusters serve as a unique model for unraveling the intricate mechanism of the catalytic reaction and exploring the complex relationship between structure and activity. Herein, three series of water-soluble heterometallic clusters LnCu6, abbreviated as LnCu6-AC (Ln = La, Nd, Gd, Er, Yb; HAC = acetic acid), LnCu6-IM (Ln = La and Nd; IM = Imidazole), and LnCu6-IDA (Ln = Nd; H2IDA = Iminodiacetic acid) are presented, each featuring a uniform metallic core stabilized by distinct protected ligands. Crystal structure analysis reveals a triangular prism topology formed by six Cu2+ ions around one Ln3+ ion in LnCu6, with variations in Cu···Cu distances attributed to different ligands. Electrocatalytic oxygen evolution reaction (OER) shows that these different LnCu6 clusters exhibit different OER activities with remarkable turnover frequency of 135s-1 for NdCu6-AC, 79s-1 for NdCu6-IM and 32s-1 for NdCu6-IDA. Structural analysis and Density Functional Theory (DFT) calculations underscore the correlation between shorter Cu···Cu distances and improves OER catalytic activity, emphasizing the pivotal role of active-site distance in regulating electrocatalytic OER activities. These results provide valuable insights into the OER mechanism and contribute to the design of efficient homogeneous OER electrocatalysts.

Amorphous FeNi alloy nanoparticles encapsulated in N doped carbon shell induced by laser irradiation with enhanced electrocatalytic activity for water oxidation

Tuning crystal structure of metal nanomaterials is an effective approach to optimize electrocatalytic performance. Here, we employ amorphous FeNi alloy nanoparticles encapsulated in N doped carbon shell (A-FeNi@NC) as an efficient electrocatalyst for oxygen evolution reaction (OER) via laser irradiation in H2O. The formation mechanism of amorphous FeNi alloy is due to the rapid heating and cooling rate result from the pulse laser. The following electrochemical measurements indicate that A-FeNi@NC displays much better OER activity compared with the conventional crystalline FeNi alloy nanoparticles encapsulated in N doped carbon shell (C-FeNi@NC). We proposed that amorphous FeNi alloy possess favorable electronic property to optimize electronic state of the external carbon shell and give rise to a higher electrocatalytic activity towards OER. The optimized electronic state of the external carbon shell commonly exists in other amorphous transition metal include FeCo, CoNi and Ni, give birth to a series of efficient electrocatalysts for OER.

Dual-site segmentally synergistic catalysis mechanism: boosting CoFeSx nanocluster for sustainable water oxidation

Efficient oxygen evolution reaction electrocatalysts are essential for sustainable clean energy conversion. However, catalytic materials followed the conventional adsorbate evolution mechanism (AEM) with the inherent scaling relationship between key oxygen intermediates *OOH and *OH, or the lattice-oxygen-mediated mechanism (LOM) with the possible lattice oxygen migration and structural reconstruction, which are not favorable to the balance between high activity and stability. Herein, we propose an unconventional Co-Fe dual-site segmentally synergistic mechanism (DSSM) for single-domain ferromagnetic catalyst CoFeSx nanoclusters on carbon nanotubes (CNT) (CFS-ACs/CNT), which can effectively break the scaling relationship without sacrificing stability. Co3+ (L.S, t2g6eg0) supplies the strongest OH* adsorption energy, while Fe3+ (M.S, t2g4eg1) exposes strong O* adsorption. These dual-sites synergistically produce of Co-O-O-Fe intermediates, thereby accelerating the release of triplet-state oxygen ( ↑ O = O ↑ ). As predicted, the prepared CFS-ACs/CNT catalyst exhibits less overpotential than that of commercial IrO2, as well as approximately 633 h of stability without significant potential loss.

Phytic-acid-doped conductive hydrogels as alkaline seawater electrocatalysts with anomalous chloride promoted oxygen evolution reaction

The side reaction mainly caused by chloride ions in seawater is the key bottleneck restricting the development of efficient and stable oxygen evolution reaction (OER) electrocatalysts for direct seawater splitting. Recent researches on OER catalysts in seawater mostly concentrate on the repulsive force of Cl− to reduce its adverse impact. Here, we verified that Cl− doping into phytic acid based polypyrrole conductive hydrogel has no significant negative effect; On the contrary, it is beneficial to enhance its activity in seawater. A series of characterization techniques show that doping Cl in the polypyrrole conductive hydrogel can improve the conductivity and promote the electron transfer in the OER process. Therefore, we achieved direct alkaline seawater electrolysis using a non-metallic PA-PPy/CP anode in an alkaline electrolysis cell.

Nitrogen-doped carbon layer encapsulating NiFeP nanosheet arrays as high-performance electrocatalyst for oxygen evolution reaction

With water electrolysis restricted to the slow kinetics of oxygen evolution reaction (OER), developing catalysts with both high activity and durability has become an urgent requirement for the development of current water electrolysis technology. Herein, we successfully prepared nitrogen-doped carbon layer encapsulating NiFe phosphide nanosheet arrays (denoted as N-C@NiFeP) catalysts by using a simple hydrothermal method combined with low temperature plasma technique. Phosphating conversion, carbonization, and nitrogen doping were realized by the same high-efficiency plasma treatment process. The nitrogen-doped carbon-coated structure modifies the NiFeP electronic structure, resulting in remarkable OER performances of N-C@NiFeP nanosheet arrays. The N-C@NiFeP nanosheet arrays possessed a tiny Tafel slope value of 27 mV dec−1 and a low overpotential of 229 mV at 10 mA cm−2. Meanwhile, the N-C@NiFeP nanosheet arrays also exhibited impressive long-term durability of 100 h under sequential OER testing at 100 mA cm−2. Our work was instrumental in paving new pathways for the construction of efficient and stable OER electrocatalysts.

Single Transition-Metal Atom Anchored on a Rhenium Disulfide Monolayer: An Efficient Bifunctional Electrocatalyst for the Oxygen Evolution and Oxygen Reduction Reactions.

Developing efficient oxygen evolution reaction (OER) and oxygen reduction reaction (ORR) bifunctional electrocatalysts is attractive for rechargeable metal-air batteries. Meanwhile, single metal atoms embedded in 2D layered transition metal chalcogenides (TMDs) have become a very promising catalyst. Recently, many attentions have been paid to the 2D ReS2 electrocatalyst due to its unique distorted octahedral 1T' crystal structure and thickness-independent electronic properties. Here, the catalytic activity of different transition metal (TM) atoms embedded in ReS2 using the density functional theory is investigated. The results indicate that TM@ReS2 exhibits outstanding thermal stability, good electrical conductivity, and electron transfer for electrochemical reactions. And the Ir@ReS2 and Pd@ReS2 can be used as OER/ORR bifunctional electrocatalysts with a lower overpotential for OER (ηOER ) of 0.44 V and overpotentials for ORR (ηORR ) of 0.26 V and 0.27 V, respectively. The excellent catalytic activity is attributed to the optimal adsorption strength for oxygen intermediates coming from the effective modulation of the electronic structure of ReS2 after Ir/Pd doping. The results can help to deeply understand the catalytic activity of TM@ReS2 and develop novel and highly efficient OER/ORR electrocatalysts.

The Electrocatalytic Oxygen Evolution Reaction Activity of Rationally Designed NiFe-Based Glycerates

The electrocatalytic oxygen evolution reaction (OER) is an arduous step in water splitting due to its slow reaction rate and large overpotential. Herein, we synthesized glycerate-anion-intercalated nickel–iron glycerates (NiFeGs) using a one-step solvothermal reaction. We designed various NiFeGs by tuning the molar ratio between Ni and Fe to obtain Ni4Fe1G, Ni3Fe1G, Ni3Fe2G, and Ni1Fe1G, which we tested for their OER performance. We initially analyzed the catalytic performance of powder samples immobilized on glassy carbon electrodes using a binder. Ni3Fe2G outperformed the other NiFeG compositions, including NiFe layered double hydroxide (LDH). It exhibited an overpotential of 320 mV at a current density of 10 mA cm–2 in an electrolytic solution of pH 14. We then synthesized carbon paper (CP)-modified Ni3Fe2G as a self-supported electrode (Ni3Fe2G/CP), and it exhibited a high current density (100 mA cm−2) at a low overpotential of 300 mV. The redox peak analysis for the NiFeGs revealed that the initial step of the OER is the formation of γ-NiOOH, which was further confirmed by a post-Raman analysis. We extensively analyzed the catalyst’s stability and lifetime, the nature of the active sites, and the role of the Fe content to enhance the OER performance. This work may provide the motivation to study metal-alkoxide-based efficient OER electrocatalysts that can be used for alkaline water electrolyzer applications.