Coupling Efficiency Research Articles

Homogeneous crystallization of MA-free, wide-bandgap perovskite films via self-assembled monolayer capping for laminated silicon/perovskite tandem solar cells

Methylammonium (MA)-free wide-bandgap perovskite films with improved thermal/light stabilities have gained considerable attention for its application in silicon/perovskite tandem solar cells. However, compared to their MA counterparts, MA-free films often suffer from fast crystallization, resulting in uneven surface morphology, poor crystalline features, and excess PbI2 impurities. To modulate the crystallization dynamics of MA-free wide-bandgap Cs0.22FA0.78Pb(Br0.15I0.85)3 films, this study proposes a self-assembled monolayer (SAM)-capped crystallization strategy, wherein C42H52N6O4RuS2 (Z907) is added to the isopropanol antisolvent in the one-step solution process. The optimized Cs0.22FA0.78Pb(Br0.15I0.85)3 film has a wide bandgap of 1.68 eV with superior morphological/crystalline properties, enhanced thermal/moisture stability, and improved interfacial energy‐level alignment. These favorable characteristics are attributed to the efficient coupling between the positive ion vacancies in the precursor, the −SCN and –COOH functional groups in Z907, and the superhydrophobic nonyl chains in the Z907 SAM. The semitransparent perovskite solar cells (PSCs) built with the optimized Cs0.22FA0.78Pb(Br0.15I0.85)3 films demonstrate substantially high power conversion efficiencies (PCEs) of 21.63 %@0.09 cm2 and 19.12 %@1 cm2. Furthermore, based on the high-efficiency PSCs, the corresponding two-terminal laminated silicon/perovskite tandem solar cells achieved record-high PCEs of 32.07 %@0.09 cm2 and 28.32 %@1 cm2 with negligible hysteresis and improved humidity/thermal stability.

Copper-Catalyzed Aerobic Cross-Dehydrogenation Coupling of Indoles for Synthesis of 2,3'-Bisindoles.

2,3'-Bisindoles with C-C linkages have attracted interest in medicinal chemistry, yet their synthesis is intricate with many steps. Notably, direct C-H/C-H cross-coupling of non-directed heteroaromatics remains challenging, often requiring precious metals and oxidants to enhance coupling efficiency. Herein, we present a copper-catalyzed C-H/C-H cross-coupling method for N-substituted indoles without directing groups, facilitated by molecular oxygen under gentle conditions. It showed reasonable functional group compatibility and provided one-pot access to a variety of 2,3'-bisindoles derivatives in moderate to good yields.

Mechanism of airborne sound absorption through triboelectric effect for noise mitigation

Mitigating broadband noise with passive airborne sound absorbers has been a long-lasting challenge, particularly for low-frequency anthropogenic sounds below kilohertz with long wavelengths, which require bulky materials for effective absorption. Here, we propose a strategy that utilizes local triboelectric effect and in-situ electrical energy dissipation mechanism for airborne sound absorption. This approach involves a fundamentally different mechanism that converts airborne sound into electricity for energy dissipation, in contrast to conventional mechano-thermal energy conversion mechanisms. We establish an equivalent acoustic impedance model to provide theoretical analysis of the underlying sound absorption mechanisms, with a theoretical maximum mechano-electro-thermal coupling efficiency approaching 100% under optimal conditions. We design fibrous triboelectric composite foam materials accordingly and show their substantially boosted acoustic absorption performance experimentally, where the adoption of diverse triboelectric material pairs validates that a larger difference in material charge affinities intensifies the local triboelectric effect and results in higher acoustic absorbing performance.

High-efficiency terahertz surface plasmon metacoupler empowered by bilayer bright–dark mode coupling

Conversion from free-space waves to surface plasmons has been well studied as a key aspect of plasmonics. In particular, efficient coupling and propagation of surface plasmons via phase gradient metasurfaces are of great current research interest. Hereby, we demonstrate a terahertz metacoupler based on a bilayer bright–dark mode coupling structure attaining near-perfect conversion efficiency (exceeding 95%) without considering absorption loss of the materials and maintaining a high conversion level even when the area of the excitation region changes. To validate our design, a fabricated metacoupler was assessed by scanning near-field terahertz microscopy. Our findings could pave the way for developing high-performance plasmonic devices encompassing ultra-thin and compact functional devices for a diverse range of applications, especially within the realm of high-speed terahertz communications.

Aerobic Thiols Oxidative Coupling to Disulfides over Robust CoOx Nanoclusters Confined within Hierarchical Silicalite-1 Zeolite.

Disulfide is an important organic reagent and synthetic intermediate that is widely used in organic synthesis, polymers, and other fields, but its synthesis still suffers from many environmental pollution and economic problems. Here, we present an environmentally friendly and efficient base-free aerobic oxidative thiol coupling catalyzed by heterogeneous CoOx nanoclusters entrapped in hierarchical silicalite-1 zeolite, synthesized by combining silane pore expansion and metal coordination methods under hydrothermal conditions. It is confirmed that open hierarchical channels favor mass diffusion, and the chemical valence of Co species in CoOx/h-S-1-H is +2, which is different from that of Co3O4 particles in CoOx/h-S-1-I. CoOx nanoclusters, are strongly fixed in the channels of silicalite-1 zeolite via Co-O-Si bonds, which is of great importance for the high catalytic activity in both symmetrical and unsymmetrical oxidative thiol coupling reactions. After recycling experiments four times, the CoOx/h-S-1-H used has almost the same chemical state and the same distribution of Co(II) species as the fresh catalysts. Based on DFT calculations and inhibition experiments, the oxidative coupling of thiols undergoes a free radical mechanism in which Co(III) causes RS-H cleavage into RS· and H· species. Subsequently, two RS· radicals are coupled to disulfides, while H· radicals react with the O species to form H2O molecules. This work not only provides guidance on catalyst design and parameter optimization for oxidative thiol coupling but also advances the understanding of the aerobic oxidation mechanism.

Efficient Photocatalytic Oxidative Coupling of Amines under Visible Light Using a Trioporphyrins-Based Covalent Triazine Framework.

Porphyrins-based porous organic polymers (POP) were widely used in photocatalytic oxidation under visible light owing to their superiority in the activation of oxygen. In contrast, the efficiency is usually limited due to the fast recombination and slow electron transfer. Herein, we report the use of a trioporphyrins-based covalent triazine framework (Por-CTF) as visible-light-active photocatalyst for the coupling oxidative of amines to imines at room temperature. By incorporating the π-conjugated porphyrin building block led to the enhanced electron transport between molecules, and the extended recombination time of excited electrons. The photocatalytic efficiency of Por-CTF is superior to that of polymer in absence of triazine framework (POP-TSP), which was prepared by radical polymerization using tetra-(4-vinylphenyl) porphyrin (TSP) as monomer. Por-CTF catalyst presented excellent efficiency for various primary amines and stability. This work provides a reasonable guidance of catalyst molecular structure design for enhancing efficiency in the photocatalytic oxidation.

Ultra-efficient surface grating couplers for chip-to-fiber and chip-to-free-space coupling based on single-beam radiation

Surface grating couplers, such as fiber-chip grating couplers and optical antennas, are fundamental devices in photonic integrated circuits, as they enable the coupling of light between the chip and an external medium. An important metric of surface grating couplers is the coupling efficiency, and high values, greater than -1 dB, are required for applications in quantum technology, light detection and ranging, and optical interconnects. Surface grating couplers typically suffer from radiation loss to the substrate, which significantly limits their coupling efficiency. Here we propose a novel grating-coupling concept that utilizes a high-refractive-index upper cladding to frustrate radiation orders to the substrate by operating in a single-beam diffraction regime. To illustrate this concept, we report the design of an easily fabricable silicon surface grating coupler with an unprecedented coupling efficiency of -0.2 dB to a single-mode optical fiber. Furthermore, the proposed strategy allows us to design an evanescently coupled millimeter-long optical antenna with a coupling efficiency of -0.1 dB to free space. Additionally, an ultra-fast wavelength-tunable beam steering of 0.37°/nm is achieved, which corresponds to more than a 2.5-fold enhancement over comparable silicon antennas. These results represent a pathway for a new set of photonic integrated interfaces for applications in which high-efficiency chip-to-fiber and chip-to-free-space coupling is critical.

Higher myocardial mitochondrial ketone body oxidation capacity in human heart failure

Abstract Introduction/Purpose Recent studies suggest that the ketone bodies (KB) beta-hydroxybutyrate (HBA) and acetoacetate (ACA) are relevant substrates for myocardial energy metabolism in heart failure (HF). However, the amount of KB-dependent mitochondrial respiration in HF has not yet been quantified. High-resolution respirometry (HRR) is the gold-standard method for quantifying substrate-dependent mitochondrial oxidative capacity. Therefore, we aimed to evaluate the association between myocardial KB-dependent oxidative capacity and human HF using HRR. Methods The primary endpoint of this single-center prospective cohort study was KB-dependent and overall mitochondrial oxidative capacity in permeabilized myocardium. We used two different protocols for our measurements. In the first HRR protocol, conventional respirometry substrates including fatty acids, complex I- and complex II substrates were used to quantify the maximum coupled oxidative phosphorylation capacity (OXPHOS). Leak respiration was quantified using oligomycin to calculate the respiratory control ratio (RCR, state 3/state 4o), and leak control ratio (LCR, state 4o/state u). In the second protocol which was recently established by our working group, HBA and ACA were used as respirometry substrates to quantify KB-dependent respiration down to the enzyme level. The relative contribution of the KBs was obtained by comparing HBA- and ACA-derived respiration to OXPHOS. We applied both protocols to myocardial samples from individuals with advanced HF (HF group, catheter-acquired endomyocardial biopsies from non-ischemic HF patients or samples of explanted hearts collected during orthotopic heart transplantation surgery in end-stage heart failure patients) as well as previously heart transplanted individuals without current heart failure (Control group). Results Controls and HF had similar demographic characteristics, with comparable age distribution (mean±SD, 56.3±10.3 vs. 54.2±10.7 years, p=0.36), sex (68.75% vs. 66.67% male, p=0.87), or body mass index (25.0±5.8 vs. 29.0±10.6 kg/m2, p=0.08) and differed significantly in cardiac index (3.06±0.67 vs. 1.93±0.44) and ejection fraction (55.8±10.2 vs. 26.6±9.1) (both p<0.0001). The HF group exhibited lower OXPHOS and respiration for all substrate combinations tested (Fig. 1A). In contrast, KB-dependent respiration did not differ between HF and controls (Fig. 1B). The relative HBA-dependent respiration (Fig. 1C) and the relative and absolute ACA-dependent respiration (Fig. 1C and D) were higher in the HF group compared to controls. Mitochondrial uncoupling (LCR) (0.47±0.29 vs. 0.44±0.09 [AU], p=0.79) and coupling efficiency (RCR) (2.75±1.38 vs. 2.11±0.39 [AU], p=0.15) were not different between the groups. Conclusion These findings suggest that mitochondria in the failing heart can utilize KBs for OXPHOS to a greater extent and further hint towards KB metabolism as a potential therapeutic target for HF.

High-efficiency and easy-processing thin-film lithium niobate edge coupler

Fiber-to-chip coupling with ultralow loss and broadband operation wavelength range is essential in the practical applications of thin-film lithium niobate (TFLN) integrated photonic devices. However, the existing edge couplers often require electron beam lithography overlaying and multiple etching processes, which are expensive and complex. In this Letter, we demonstrate an edge coupler that includes only a vertically tapered TFLN waveguide and silicon dioxide cladding. The coupling efficiency between a lensed fiber and an on-chip LN waveguide is down to 1.43 dB/facet, while the 3-dB bandwidth exceeds the range from 1510 to 1630 nm. These edge couplers also show reliable fiber misalignment tolerance. Furthermore, the fabrication complexity is greatly reduced since only a single etching step for the TFLN waveguide is needed. The minimum waveguide width of 1.3 μm guarantees compatibility with i-line photolithography, providing a potential for massive production of TFLN devices.

Coupling light into a guided Bloch surface wave using an inversely designed nanophotonic cavity

Controlling the propagation of light in the form of surface modes on miniaturized platforms is crucial for multiple applications. For dielectric multilayers that sustain Bloch surface waves at their interface to an isotropic dielectric medium, a conventional approach to manipulate them exploits shallow surface topographies fabricated on top of the truncated stack. However, such structures typically exhibit low index contrasts, making it challenging to confine, steer, and guide the Bloch surface waves. Here, we theoretically and experimentally demonstrate a device for a Bloch surface wave platform that resonantly couples light from a cavity to a straight waveguide. The structure is designed using topology optimization in a 2D geometry under the effective index approximation. In particular, the cavity–waveguide coupling efficiency of the radiation emitted by an individual source in the cavity center is optimized. The cavity is experimentally found to exhibit a narrow resonant peak that can be tuned by scaling the structure. The waveguide is shown to guide only light that resonates in the cavity. Fully three-dimensional simulations of the entire device validate the experimental observations.

Unravelling the Effect of Crystal Facet of Derived-Copper Catalysts on the Electroreduction of Carbon Dioxide under Unified Mass Transport Condition.

Altering the physical structure and chemical property of copper, i.e., particle size, surface morphology, composition or crystal facet, has been demonstrated to be effective in steering the selectivity of products in electrochemical reduction of carbon dioxide. However, these modifications generally result in the change of active surface area, leading to differences in the geometric current density and local pH, which are also demonstrated to be the key factors for observed selectivity change. In this work, we deconvolute the effect of mass transport and local pH from the effect of crystal facet by investigating five copper-based catalysts with identical roughness factors for electrochemical reduction of carbon dioxide in an H-cell. Interestingly, CuO-derived catalyst stands out as the best catalyst for C-C coupling. At -1.07 V vs. RHE, the faradaic efficiency of C2+ product reaches 44.3%, with a partial current density of -10.8 mA cm-2. Electrochemical adsorption of *OH reveals that the C2+ product selectivity of derived-copper catalysts correlates positively with the ratio of Cu(100)/Cu(110) of five catalysts. Additionally, in situ Raman spectroscopy reveals that the percentage of low-frequency band linear CO (LFB-CO), which is attributed to the adsorbed *CO on Cu(100) facet, increases with the C-C coupling efficiency.

Unravelling the Effect of Crystal Facet of Derived‐Copper Catalysts on the Electroreduction of Carbon Dioxide under Unified Mass Transport Condition

Altering the physical structure and chemical property of copper, i.e., particle size, surface morphology, composition or crystal facet, has been demonstrated to be effective in steering the selectivity of products in electrochemical reduction of carbon dioxide. However, these modifications generally result in the change of active surface area, leading to differences in the geometric current density and local pH, which are also demonstrated to be the key factors for observed selectivity change. In this work, we deconvolute the effect of mass transport and local pH from the effect of crystal facet by investigating five copper‐based catalysts with identical roughness factors for electrochemical reduction of carbon dioxide in an H‐cell. Interestingly, CuO‐derived catalyst stands out as the best catalyst for C‐C coupling. At ‐1.07 V vs. RHE, the faradaic efficiency of C2+ product reaches 44.3%, with a partial current density of ‐10.8 mA cm‐2. Electrochemical adsorption of *OH reveals that the C2+ product selectivity of derived‐copper catalysts correlates positively with the ratio of Cu(100)/Cu(110) of five catalysts. Additionally, in situ Raman spectroscopy reveals that the percentage of low‐frequency band linear CO (LFB‐CO), which is attributed to the adsorbed *CO on Cu(100) facet, increases with the C‐C coupling efficiency.

Fabrication of slanted gratings with high refractive index starting from master nanoimprint mold

Recently, nanoimprinting has attracted a new round of attention in the industry due to the boom in demand for augmented reality/virtual reality (AR/VR), metalens and microlens, and even semiconductors. Slanted gratings have great application prospects in AR/VR displays because of their high efficiency in light coupling. UV-Nanoimprint lithography (UV-NIL) has been identified as one of the most feasible routes for mass manufacture of high refractive index (RI) slanted gratings. This paper presents a fabrication of high RI slanted gratings based on UV-NIL. A comprehensive study on the optical principles of slanted gratings is conducted, followed by simulation-based optimization of the grating parameters. The key element for applying nanoimprint to fabricate slanted gratings is the master mold, which is acquired by a tilted angle etching of metal gratings as an etching mask on silicon wafers with F-based plasma. The influence of experimental parameters, such as the etching power and etching mask thickness on the morphology of the slanted gratings on the master mold are investigated. The working mold was simply duplicated from the master mold by UV-NIL with a low surface energy working mold material. The high RI slanted gratings were achieved by imprinting a UV-curable resin with high RI. Finally, experimental verification was performed to assess the optical performance of the slanted gratings.

Influence of Copper Surfaces on CO2 vs. CO C−C Coupling Efficiency

AbstractCO2 electrochemical reduction (CO2ER) powered by renewable electricity is critical for transitioning to a carbon‐neutral society by transforming CO2 into essential commodities and fuels. The formation of multi‐carbon compounds through C−C coupling reactions is crucial due to their high energy density and broad industrial uses. Traditionally, C−C coupling was believed to occur through the reaction of *CO (surface‐bound CO) with *C1 intermediates (surface‐bound hydrocarbons with one carbon atom produced during CO2ER). In this study, we used DFT calculations combined with a constant electrode potential model to discover a preference for CO2+*C1 over conventional *CO+*C1 coupling on three commonly observed copper surfaces including Cu(111), Cu(110), and Cu(100). This result demonstrates that CO2 is a more efficient carbon source than *CO for coupling with *C1. Among the nine *C1 species investigated, *CHO, *CHOH, *C, *CH, and *CH2 show greater reactivity towards CO2+*C1 couplings on all the surfaces. Thus, enhancing CO2ER efficiency necessitates increasing the surface concentrations of these five *C1 intermediates, and several strategies have been proposed to accomplish this goal.

Continuous Flow Ni- or Ru-Zeolite-Catalyzed Intramolecular Dehydration of Diols and Seco-Acids for Macrocyclic Ethers and Lactones.

Herein, we report the efficient intramolecular dehydrative coupling of symmetrical and unsymmetrical diols for the synthesis of macrocyclic crown ethers in the presence of Ni-zeolite as a catalyst under continuous flow module. This method is also efficient for the intramolecular dehydrative macrolactonization of seco-acids using Ni-zeolite or Ru-zeolite. This flow catalysis is demonstrated by a wide substrate scope with one-time packed Ni-zeolite to produce 20 macrocyclic polyethers and 11 examples of broad macrolactones with water as a byproduct.

High Coupling Efficiency Polarization Splitting Waveguide Grating Couplers

High Coupling Efficiency Polarization Splitting Waveguide Grating Couplers

Wood Polymer Composites Based on the Recycled Polyethylene Blends from Municipal Waste and Ethiopian Indigenous Bamboo (Oxytenanthera abyssinica) Fibrous Particles Through Chemical Coupling Crosslinking.

Valorization of potential thermoplastic waste is an effective strategy to address resource scarcity and reduce valuable thermoplastic waste. In this study, new ecofriendly biomass-derived wood polymer composites (WPCs) were produced from three different types of recycled polyethylene (PE) municipal waste, namely linear low-density polyethylene (LLDPE), medium-density polyethylene (MDPE), or high-density polyethylene (HDPE), and their blend with equal composition (33/33/33 by wt.%). Bamboo particle reinforcement derived from indigenous Ethiopian lowland bamboo (LLB), which had never been utilized before in a WPC formulation, was used as the dispersed phase. Before utilization, recycled LLDPE, MDPE, and HDPE were carefully characterized to determine their chemical compositions, residual metals, polycyclic aromatic hydrocarbons, and thermal properties. Similarly, the fundamental mechanical properties of the WPCs, such as tensile strength, modulus of elasticity, flexural strength, modulus of rupture, and unnotched impact strength, were evaluated. Finally, the thermal stability and interphase coupling efficiency of maleic-anhydride-grafted polypropylene (MAPP) were carefully investigated. WPCs formulated by melt-blending either of the recycled PEs or the blend of recycled PE with bamboo particles showed significant improvement due to MAPP enhancing interfacial adhesion and thermally induced crosslinking, despite inherent immiscibility. These results were confirmed using Fourier transform infrared spectroscopy, scanning electron microscopy, and thermogravimetric analysis. The formulated WPCs may promote PE waste cascading valorization, offering sustainable alternatives and maximizing LLB utilization. Furthermore, comparison with well-known standards for polyolefin-based WPCs indicated that the prepared WPCs can be used as alternative sustainable building materials and related applications.

Comparison of YAG:Nd3+-Yb3+ nanothermometers synthesized by Pechini and solvothermal methods

Luminescence intensity ratio-based nanothermometry is a widely studied thermal sensing technique in the literature. Regarding biological purposes, it is essential to have thermal probes that are efficient in this type of environment. Thermal bioprobes demand highly crystallized nanocrystals, commonly smaller than 100 nm, with luminescence emissions in the near-infrared range that are not significantly absorbed by biological tissues. Several nanomaterials that have been studied for nanothermometry do not meet the requirements for this type of applications. Accordingly, researches are needed to develop suitable and reliable nanothermometers for thermal sensing. Therefore, our goal was to investigate the impact of Nd3+-Yb3+ co-doping on the thermometric performance of YAG matrix, a promising crystal because it presents a host structure favoring the insertion of lanthanide ions, which provide its luminescent features. In order to achieve this purpose, we first synthesized YAG:Nd3+-Yb3+ nanocrystals through a generic route - called modified Pechini method - to screen their thermal properties. Our results show that YAG:Nd3+-Yb3+ nanocrystals have the potential to work in vivo environments. The nanothermometers investigated here are excited in the first biological window (BW-I) at 805 nm with luminescence emissions within the BW-II, at 1030.5 and 1064 nm. By co-doping the YAG matrix with different Nd3+-Yb3+ concentrations, we studied the energy transfer process between the dopant ions and their impact on thermometry efficiency. By the efficient coupling of the Nd3+-Yb3+ pair, we improved the Sr value by a factor of 3 of YAG compounds up to 0.6 %.K−1. We then synthesized YAG:Nd3+-Yb3+ nanocrystals using a second type of synthesis, by solvothermal means, in order to obtain individual nanocrystals, well dispersed in aqueous solutions, and to adapt their morphology and size for biological purposes. Therefore, we compared the structural and luminescence properties and thermometry efficiencies of YAG:Nd3+-Yb3+ nanocrystals obtained through two distinct processes and showed that the nanothermometry properties are not affected by the synthesis method.

Open frame-like Co-Fe oxides superstructures for highly efficient cross-dehydrogenative coupling reaction of N-phenyltetrahydroisoquinoline under mild conditions

An open frame-like Co-Fe oxides catalyst has been successfully prepared using a time-controlled strategy. Benefiting from the unique open frame-like superstructure and synergistic bimetallic composition, this novel catalyst exhibits excellent catalytic activity (up to 91 % isolated yield) and substrate suitability for Cross-Dehydrogenative Coupling reaction (CDC) of N-phenyltetrahydroisoquinolines and nitroalkanes using oxygen as the oxidant under mild reaction conditions. And after several runs, the reused catalyst still maintains great stability. This may attributed to the interaction between Fe and Co. In addition, through the radical trapping experiments, we found that O2·− species play an important role in the cross-dehydrogenative coupling reaction.

Novel strategies for enhancing energy metabolism and wastewater treatment in algae-bacteria symbiotic system through carbon dots-induced photogenerated electrons: The definitive role of accelerated electron transport

The nitrogen removal efficiency of the algae-bacteria symbiotic system (ABSS) remains challenging due to competition for light capture and insufficient electron donors in aquaculture wastewater. To overcome this bottleneck issue, we first identified and reported the introduction of photogenerated electrons into ABSS by coupling them with carbon dots (CDs). The energy metabolism (21.52 %-56.25 %) and pollutant degradation efficiency (89.36 %-96.42 %) of ABSS/CDs surpassed the biochemical limit observed in traditional ABSS. Notably, the addtion of CDs facilitated an opening of the plastoquinone-pool (PQ-pool) valve and accelerated electron transfer rates, enabling photogenerated electrons to selectively target light-harvesting complexs as activation sites, thereby mobilizing photosynthesis and respiratory system activity to enhance nicotinamide adenine dinucleotide reduced (NADH) and adenosine triphosphate (ATP) production while promoting tricarboxylic acid (TCA) and Calvin cycle processes. In simulated swine wastewater treatment, ABSS/CDs achieved higher removal rates for the chemical oxygen demand (COD), total nitrogen (TN) and ammonium-nitrogen (NH4+-N) (100 %, 99.23 % and 98.62 % respectively) compared to pure culture systems alone. Network-based analysis revealed that ABSS/CDs improved microbial community structure stability within the photobioreactor while demonstrating efficient coupling between fungi, nitrifying bacteria, and denitrifying bacteria for enhanced performance in nitrogen removal processes. The upregulation of nitrogen metabolism and PQ-pool genes maintains efficient electron transport rates and contributes to nitrogen removal. This study expands our understanding of the physiological aptitudes of ABSS and provides valuable insights into applying CDs photoelectrons for enhanced wastewater treatment.