Water Treatment Efficiency Research Articles

Two-stage efficiency evaluation of industrial water resources and the role of digital inclusive finance: insight from Yangtze River Delta

The Yangtze River Delta (YRD) occupies 2.1% of China's territory but accounts for 1/4 of its GDP. Boosting efficiency of industrial water resources in YRD will drastically decrease water pollution and resource constraints. The current paper employed Network Super-SBM and the Global Malmquist-Luenberger index to evaluate industrial water use efficiency and wastewater treatment efficiency of YRD’ cities. Furthermore, digital inclusive finance and green innovation are introduced to investigate the mechanisms underlying their influence on the overall industrial water resources efficiency. The empirical findings posts that: (1) there is still room to improve the overall efficiency, especially the water treatment efficiency; (2) the MI value of each stages in most samples is greater than 1, indicating that the water treatment efficiency and water use efficiency are improving. It is mainly driven by the improvement of the efficiency of the management; (3) there are substantial differences in water resource efficiency among metropolitan areas, with Nanjing-metropolitan areas and Hefei-metropolitan areas having higher water use efficiency and water treatment efficiency for both stages, while Hangzhou-metropolitan areas and Shanghai-metropolitan areas have lower water treatment efficiency. As shown by the Kernel density Estimation, the degree of efficiency dispersion within same metropolitan area is reducing; and (4) digital inclusive finance will boost overall efficiency and water treatment efficiency, with green innovation as a mediating factor. The findings herein offer compelling evidence that financial development increases the effectiveness of water resources, introduce fresh perspectives for the government to put forward water-related policies, and provide ideas for high-quality economy.

Effect of irradiation on Co0.72Sr0.07Ni0.21Fe2O4 ferrite nanoparticles and their catalytic efficiency in water treatment

This study investigates the magnetic, thermal, and electrical properties of Co0.72Sr0.07Ni0.21Fe2O4 ferrite nanoparticles under different conditions, including as-prepared, irradiated (at a dose of 100 kGy in CO2 atmosphere), and aged (at 1000°C). The magnetic properties are analyzed using M-H loops, revealing that the aged sample exhibits the highest magnetization values. The observed decrease in magnetization after irradiation and increase after aging is consistent due to the presence of a new phase (γ-FeOOH) in the irradiated sample that XRD confirms. Electrical conductivity measurements demonstrate that the aging sample exhibits the highest electrical conductivity due to increased grain boundaries, while the irradiated sample shows increased conductivity attributed to oxygen vacancies. As well as the nanocomposite of PVP and Co0.72Sr0.07Ni0.21Fe2O4 nanoparticles aged (at 1000°C) is found to be effective in degrading the Toluidine Blue (TB) dye through catalytic oxidation and photodegradation mechanisms. The catalytic degradation of TB dye provides valuable insights into the potential application of these ferrite nanoparticles in environmental remediation and wastewater treatment. Also, nanocomposite demonstrated significant antimicrobial activity against five pathogenic bacterial strains commonly found in contaminated water, with superior effectiveness against Gram-negative bacteria, particularly Salmonella enterica and Pseudomonas aeruginosa, suggesting its potential as an effective water treatment agent. The novelty and the aims are to analyze the changes in magnetization and conductivity of the nanoparticles under different conditions, including as-prepared, irradiated, and aged samples. Additionally, the catalytic efficiency of the aged nanoparticles in degrading Toluidine Blue (TB) dye is examined, providing insights into their potential application in environmental remediation and wastewater treatment.

Enhancing photocatalytic water treatment efficiency via nitrogen Self-Doping and Hive-Like Structuring in isotype homojunctions of g-C3N4 generated from Thiourea-Melamine copolymerization

The combination of overpopulation and rapid industrial progress has led to a pronounced increase in water contamination. Photocatalysis emerges as a viable solution for mitigating water pollution, and graphitic carbon nitride (g-C3N4) is considered as a particularly promising photocatalyst due to its advantageous properties, such as low cost, and high chemical stability. Nonetheless, the effectiveness of g-C3N4 is often compromised by its limited surface area and substantial recombination of photogenerated charge carriers. To address these challenges, in this work, we propose a systematic approach to develop photocatalytically efficient surface structures and intimate isotype homojunctions through the copolymerization of various g-C3N4 precursors. A range of photocatalysts, each with distinctly tailored morphologies and homojunctions, was produced and their photocatalytic performance was assessed through the removal efficiencies of model pollutants, bisphenol A (BPA), and methylene blue (MB), with each at a concentration of 10 mg L-1. The enhanced photocatalytic activity observed in the optimized sample is primarily attributed to its significantly increased surface area, which is ten times greater than that of standard g-C3N4, and a marked reduction in charge recombination, which is four times lower, facilitated by the intimate homojunction. Thus, this work will open the door to the synthesis of various highly efficient photocatalysts for application in the photodegradation of diverse pollutants, consequently mitigating adverse environmental effects.

Single-atom Ru modified flake g-C3N4 enhances photogenerated electron transport for rapid degradation of tetracycline antibiotics: Non-radical mechanism and ecotoxicity studies

Design of green and low-cost single-atom catalysts (SACs) with high-performance is key to moving photocatalytic degradation of antibiotics toward applications. In order to achieve SACs for large-scale manufacturing, we prepared ultrathin flake carbon nitride (FCN) by low-energy-consuming physical knockout means, and also applied an in situ growth strategy with stable and easy-operating effect to anchor the Ru element on FCN in the form of single atom. Notably, in the PMS/Vis/0.5Ru-FCN system, the degradation rate of tetracycline achieved 100 % in just five minutes, with an apparent rate constant of 0.236 min−1. Ru-FCN exhibits selective and stable determination due to narrow bandgap, unique photoresponsivity and low photogenerated carrier complexation rate. Mechanism investigation reveal that Ru-N4 sites accelerated the electron transfer between Ru-FCN and PMS, while the low oxidation state of Ru elements reduced the risk for metal corrosion. DFT calculations predict the attack sites of reactive oxygen species. This work provides a rational explanation for the charge transfer and resistance to external disturbance by Ru single atom, and it also provides a new direction to enhance the efficiency of water treatment.

Extended photoperiods enhance the production and water treatment performance of algal-bacterial bioflocs from aquaculture wastewater

Reducing pollution and converting wastewater nutrients into useful biomass are major challenges of intensive aquaculture. We investigated the nitrogen and phosphorus metabolism, nutrient composition, and microbial community of algal-bacterial bioflocs (ABBs) produced under glucose addition and different photoperiods. This biomass was used for aquaculture wastewater treatment for 18 days. ABBs produced under longer photoperiods were smaller and more numerous, which facilitated nitrogen recovery and reduced nitrogen loss. Additionally, nitrogen and phosphorus-metabolizing enzyme activities, as well as the activity of overall microorganisms were positively correlated with the light duration. The removal rates of COD (96.89 %), DTN (93.57 %), and DTP (93.67 %) from wastewater by ABBs were highest when the photoperiod was 16L:8D during the production period. Moreover, the crude protein content (41.77 ± 0.11 %) was highest under a photoperiod of 12L:12D, and the rich amino acid and fatty acid profile of the ABB under this photoperiod enhanced its utility as a feed additive for aquaculture species. The high-throughput sequencing analysis revealed a high abundance of Hydrogenophaga at the genus level, highlighting its denitrification capacity of ABBs under the 16L:8D photoperiod. Redundancy analysis (RDA) demonstrated that photoperiod, as a key driver in the formation of microbial communities in ABBs, exerted a direct influence on water treatment efficiency and nutrient accumulation. This study provides new insights into the effects of photoperiod on the properties of ABBs, which has implications for the treatment and subsequent application of aquaculture wastewater.

Process efficiency assessment of turbidity removal from tigris river using microfiltration membranes

The current study aims to use microfiltration membrane units instead of using traditional treatment methods (flocculation and coagulation) to enhance water treatment efficiency and lower operational and fixed costs. Specifically, it explores using a polypropylene membrane with a pore size of 1 µm and a ceramic membrane with a pore size of 0.5 µm to remove turbidity, total suspended solid TSS, and Escherichia coli bacteria from the Tigris River water within Baghdad. An experimental study compared the removal efficiency of real and simulated Tigris River water with different turbidity for polypropylene and ceramic membranes. Operational parameters such as initial turbidity concentration, temperature, flow rate, and membrane fouling were studied as a function of time. Also, two operating methods, dead-end, and crossflow, were discussed regarding the removal efficiency of suspended solids, turbidity, and Escherichia coli bacteria 65 %, 91 %, and 99 %, respectively, for the polypropylene membrane. And 75 %, 97 %, and 100 % for the ceramic membrane. The results of the current study indicate that ceramic membranes are the most susceptible to contamination by fouling, but at the same time, they are the most resistant and have the highest rate of removal efficiency than the polypropylene membrane. In addition, the crosse flow operation is better than the dead-end operation and is also considered a way to reduce the fouling that occurs in the membrane filtration. Microfiltration in general can achieve economic profit and minimal environmental impact, and ceramic microfiltration membranes in particular can achieve high-quality water.

The Dye-Contaminated Water Treatment Efficiency of Two Types of Geopolymers: A Comparative Study of Structural, Microstructural and Adsorption Properties

The Dye-Contaminated Water Treatment Efficiency of Two Types of Geopolymers: A Comparative Study of Structural, Microstructural and Adsorption Properties

Cadmium Remediation from Water Using Low-Cost Modified Biochar: An Approach Towards Sustainable Remediation

Biochar is increasingly recognized as an effective adsorbent for the removal of Cadmium (Cd²⁺), a prevalent contaminant in industrial wastewater. This study utilizes rice husk biochar to target aqueous Cd²⁺. The biochar was synthesized through rapid pyrolysis at 450°C. To enhance its Cd²⁺ removal efficiency, the biochar was modified with chitosan, using a treatment with a 2% aqueous acetic acid chitosan solution followed by sodium hydroxide (NaOH) processing. Both the chitosan-modified biochar (CMBC) and the non-modified biochar (NMBC) underwent comprehensive characterization via proximate and ultimate analysis, Fourier-transform infrared spectroscopy (FT-IR), and scanning electron microscopy (SEM). At pH 5, the Langmuir maximum adsorption capacity of CMBC was 134 mg/g, compared to 48.2 mg/g for NMBC at 318 K. CMBC exhibited a significantly higher Cd²⁺ removal efficiency, attributed to the introduction of amine groups from chitosan modification that enhance Cd²⁺ adsorption. The adsorption mechanisms on CMBC were further explored through FT-IR and SEM comparisons before and after Cd²⁺ uptake. The chitosan modification notably improved the Cd²⁺ adsorption capacity, which was also influenced by pyrolysis temperature; higher temperatures led to reduced biochar yield but increased porosity, surface area, and adsorption capacity. The adsorption process was pH-dependent, with a peak capacity of 161 mg/g observed at pH 5. The Freundlich model effectively described the adsorption equilibrium, suggesting contributions from both chemisorption and physisorption on the heterogeneous biochar surface. In summary, rice husk biochar, especially when modified with chitosan, proves to be a cost-effective, sustainable material for Cd²⁺ removal from aqueous solutions, enhancing water treatment efficiency through improved adsorption capabilities.

Wastewater Treatment with Bacterial Representatives of the Thiothrix Morphotype.

Bacteria of the Thiothrix morphotype, comprising the genera Thiothrix, Thiolinea and Thiofilum, are frequently encountered in domestic and industrial wastewater treatment systems, but they are usually not clearly differentiated due to the marked similarity in their morphologies. Methods ranging from light microscopy, FISH and PCR to modern high-throughput sequencing are used to identify them. The development of these bacteria in wastewater treatment systems has both advantages and disadvantages. On the one hand, the explosive growth of these bacteria can lead to activated sludge bulking or clogging of the treatment system's membranes, with a consequent decrease in the water treatment efficiency. On the other hand, members of the Thiothrix morphotype can improve the quality of granular sludge and increase the water treatment efficiency. This may be due to their capacity for sulfide oxidation, denitrification combined with the oxidation of reduced sulfur compounds, enhanced biological phosphate removal and possibly denitrifying phosphate removal. The recently obtained pangenome of the genus Thiothrix allows the explanation, at the genomic level, of the experimental results of various studies. Moreover, this review summarizes the data on the factors affecting the proliferation of representatives of the Thiothrix morphotype.

Integrated hybrid membrane system for enhanced water treatment and desalination for environmental preservation

Technology advancements in desalination, water treatment, and energy efficiency are crucial to preserving our planet. It is critical to find solutions for the future that save natural resources and lessen environmental damage because the freshwater shortage is getting worse, and energy demand is increasing. They face various obstacles, even though their breakthroughs are extremely important. Lot of energy can be utilized for the traditional desalination techniques, as it negatively impacts the environment. Then, the process of the existing Water Treatment (WT) are expensive and ineffective. An Integrated Hybrid Membrane System for Enhanced WT (IHMS-EWT) is a unique technique for WT and desalination was suggested in this study. The integration of many membrane procedures like nanofiltration, reverse and forward osmosis, and membrane distillation, and these will helps in facilitating the best WT and desalination methods. Due to the incorporating Renewable Energy (RE), the IHMS-EWT also demonstrates the (SWMS) Sustainable Water Management System, as it enhances the EE and thereby reducing the environmental impact. The great potential in the wide range of applications was offered by the IHMS-EWT technique. Providing the decentralized WT solutions in the remote areas, this unique approach has the ability to reduce the fresh water scarcity in the coastal areas based on the demands of the municipal, industrial and agricultural demands. The environmental sustainability throughout the lenghthy operations was ensured by the support of IHMS-EWT. It also helps in providing resilience in the crisis situations. The cost-effective evaluations, operating parameter optimization, and performance prediction of the method was enabled by employing the computational modelling. Through simulatimg different contexts, the effective configurations and operational techniques are focussed on the study for enhancing the IHMS-EWT technology.The model shift in the SWM, the IHMS-EWT technique addresses the main problems and brings one step for more secure environment. Comparing to other existing methods, Improving the water purification by 98.2 %, 94.2 % efficiency rate, the EC prediction rate of 96.2 %, the cost-effectiveness rate by 82.4 % and the performance rate by 96.7 % by the suggested IHMS-EWT model and it was demonstrated by the outcomes of the experiment.

Spatial confined synthesis of submicron Fe-MoS2 with abundant surface cationic groups and sulfur vacancies for enhanced peroxymonosulfate activation

ABSTRACT The widespread use of emerging refractory organic contaminants poses a significant threat to human health, prompting the need for a cost-effective and efficient removal strategy. While the iron ions/PMS system effectively removes organic pollutants, slow Fe3+ to Fe2+ transformation hampers its efficiency, and the homogeneous distribution of iron ions complicates separation, resulting in secondary sludge pollution. Herein, we developed a novel submicron Fe-MoS2 (S-Fe-MoS2) catalyst with abundant surface cationic groups and sulfur vacancy through a cationic polyacrylamide aerogels (CPAMA) confined hydrothermal synthesis strategy. These features promote active site exposure, enhance reactant adsorption, and accelerate electron transfer between Mo and Fe sites, improving catalytic kinetics and promoting Fe3+/Fe2+ cycle for PMS activation. As a result, the S-Fe-MoS2/PMS system exhibited a high catalytic rate constant (k obs) of 0.32 min−1, in the degradation of 4-chlorophenol (4-CP), 1.5 times higher than that of the conventional Fe-MoS2/PMS system. It also achieved 82.9% total organic carbon (TOC) degradation within 60 min. Additionally, it possessed similar degradation performance for various organic pollutants, along with remarkable reusability (four cycles) and broad pH adaptability (2–8), indicating significant potential for widespread application. This study provided a new way for developing advanced heterogeneous catalysts with high efficiency for water treatment.

Impact of Flooding and Drought Risks on the Cost of Bond Financing for Water Utilities.

The global water cycle has experienced significant changes due to the interplay of climate shifts and human activities, resulting in more frequent and severe droughts and floods. These shifts have started to impact the operational efficiency of water treatment and delivery systems. This, in turn, has implications for the economic performance of these assets and the climate-impacted cost of their financing through the issuing of municipal bonds. Analyzing a decade of water bond data (2009-2019), this study offers empirical evidence for the impact of flood and drought risks on bond investor demand to offset water risks. The results reveal that bond markets factored in coastal flood risks between 2013 and 2019, adjusting by 3-6 basis points (bps) per risk score unit, and riverine flood risks from 2009 to 2013, with a 5-11 basis points increase per risk score unit. These effects were primarily driven by bonds issued in the Pacific Coast and Great Plains regions, respectively. In contrast, the pricing of drought risks in the bond market followed a more nuanced pattern. Additionally, we show the channeling effects of water consumption and investor perceptions of climate change on water risk pricing in the bond market. These findings have significant implications for water risk management in the public sector as regions with heightened water risk exposure are perceived as riskier by market participants, leading to a higher cost of capital for municipalities and water agencies.

UV-induced reactive species dynamics and product formation by chlorite

Chlorite (ClO2-) is a regulated byproduct of chlorine dioxide water treatment processes. The transformation of chlorite under UV irradiation into chloride (Cl-) and chlorate (ClO3-) involves reactive species chain reactions that could enhance chlorine dioxide water treatment efficiency while reducing residual chlorite levels. This study conducted a mechanistic investigation of chlorite phototransformation by analyzing reaction intermediates and stable end products, including chlorine dioxide (ClO2), free chlorine (HOCl/OCl-), hydroxyl‑radical (•OH), Cl-, and ClO3- through combined experimental and modeling approaches. Experiments were performed at UV254 irradiation in pure buffered water within the pH range of 6 to 8. Results indicated that the apparent quantum yields for chlorite phototransformation increased from 0.86 to 1.45, and steady-state •OH concentrations at 1 mM initial chlorite concentration rose from 8.16 × 10–14 M – 16.1 × 10–14 M with decreasing pH values. It was observed that under UV irradiation, chlorite acts as both a significant producer and consumer of reactive species through three distinct reaction pathways. The developed kinetic model, which incorporates optimized intrinsic chlorite quantum yields Φchloritein ranging from 0.33 to 0.39, effectively simulated the loss of oxidants and the formation of major products. It also accurately predicted steady-state concentrations of various species, including •OH, •ClO, Cl• and O3. For the first time, this study provides a comprehensive transformation pathway scheme for chlorite phototransformation. The findings offer important insights into the mechanistic aspects of product and oxidizing species formation during chlorite phototransformation.

Investigating the application of the aquaponic paradigm to Litopenaeus vannamei farming

Abstract Aquaponics, a sustainable farming system combining aquaculture and hydroponics, has been widely adopted, used, particularly in freshwater. This study explores the feasibility of adapting the aquaponic model to saltwater conditions, specifically for wastewater treatment from Litopenaeus vannamei farming using the salt-tolerant plant species Rhizophora apiculata Blume. It focuses on plant development and calculates the water treatment effectiveness in terms of nutrient removal in mg of NH4 +, NO2 −, NO3 −, and total phosphorus per gram of plant mass. The first phase involved seedling production, model creation, and testing the plant’s wastewater treatment capabilities. After three months of growth, the plants are subjected to shrimp wastewater, and their nutrient removal efficiency is determined. The obtained data provides essential parameters for the operation of the model during Phase 2. In Phase 1, R. apiculata Blume removed NH4 +, NO2 −, NO3 −, and total phosphorus at 95%, 97%, 59%, and 57% efficiency after seven days, respectively. It focuses on plant development and quantifies the efficiency of water treatment by measuring the removal of nutrients such as NH4 +, NO2 −, NO3 −, and total phosphorus per gram of plant mass.The calculated nutrient removal coefficients per gram of plant mass are NH4 +: 0.007, NO2 −: 0.005, NO3 −: 0.031 and total phosphorus: 0.121. In Phase 2, the designed aquaponic model was developed, which included a shrimp tank with 300 individuals per 1 m3, a fish tank with 50 individuals per 0.5 m3, and a plant growing system. The experimental aquaponic model demonstrates the technical feasibility of using R. apiculata Blume to recycle water in shrimp farming. The model shows potential for scaling up and offers additional benefits, as the leaves R. apiculata of can serve as an herbal source for aquatic species.

Calcined biomass-bentonite composites as eco-friendly adsorbents for the treatment of toxic anionic and cationic dye wastewater

Adsorption is a suitable technique for decontamination of organic dye wastewaters. Herein, we comparatively investigated the adsorption performance of bentonite (BEN) and its modification with groundnut shell (BGS) and palm kernel shell (BPS) for methylene blue (MB) and congo red (CR) dyes removal from aqueous solution. BGS and BPS were prepared by calcination at 300 °C for 6 h and were characterized using BET, SEM, EDS and FTIR to determine their textural properties, morphologies, elemental compositions, and functional groups. The BET surface examination revealed that the surface area of BEN was enhanced from 78 m2/g to 195 m2/g and 141 m2/g after modification with groundnut shell (BGS) and palm kernel shell (BPS), respectively. The adsorption process in a batch system was subjected to comprehensive experimentation to investigate the effect of adsorbent dosage, contact time, temperature, initial concentration, and pH. The adsorption was fitted to adsorption isotherm and kinetic models and the results revealed that the adsorption process of BEN, BGS, and BPS towards MB and CR adsorption can be best described by Temkin, Freundlich and pseudo-second order kinetic models. The adsorption capacities (qmax) for uptake of MB by BEN, BGS and BPS are 10.61, 10.85 and 10.93 mg, while CR exhibited 8.83, 6.87 and 5.86 mg/g, respectively. The thermodynamics study revealed that the adsorption process was spontaneous, feasible, endothermic in nature. The adsorption process is governed by electrostatic attraction with the involvement of physical and chemical adsorption. This study suggests that biomass-modified bentonite is a sustainable, cost-effective, non-toxic, and greener approach for eliminating MB and CR from aqueous solution. Furthermore, the modification method does not only achieve substantial removal of MB and CR dyes, but also offers considerable energy savings and operational cost reductions in real-time based on water quality data. This study does present a novel, sustainable approach to improve natural water treatment efficiency and compliance.

Chemically engineered CoOx-doped flower-like NiO nanoparticles for photodegradation of Bisphenol A and Orange II Dye, and genetic screening of toxicity via Caenorhaditis elegans

In this study, pure flower-like NiO nanoparticles (NiO NPs), and CoOx-doped NiO nanocomposites (NCs) with varying concentrations (2.5 wt%, 5 wt%, 7.5 wt%, and 10 wt%) were synthesized using a simple hydrothermal technique. Characterization through XRD, XPS, FESEM, TEM-EDS, and BET analyses confirmed their unique structural features and composition. CoOx(2.5 wt%)/NiO NCs exhibited flower-like flakes wedged to the surface of the NiO microspheres, with a measured total pore volume of 0.734 cm³/g and an N2-BET surface area of 285.18 m²/g. Under UV light, these CoOx(2.5 wt%)/NiO NCs demonstrated significant photocatalytic efficiency, archiving 98.7 % and 99 % degradation of BPA and O-II dyes within 120 min. This performance is attributed to the formation of a p-n junction at the interface of CoOx-doped NiO NCs and their flower-like morphology, facilitating effective charge separation and photodegradation. Additionally, toxicity assessment using the C. elegans genetic model focused on stress-responsive genes GST-4, DAF-16, and intracellular ROS. The result showed that the BPA photocatalytic byproduct initially generated intracellular reactive oxygen species (ROS), which gradually diminished over time (60–120 min). In contrast, no evident toxicity was observed for O-II dye byproducts even during short-time degradation. This study not only highlights the efficiency of CoOx-doped NiO NCs in degrading BPA and O-II pollutants but also provides insights into toxicity dynamics, demonstrating their potential for eco-friendly water purification and enhanced water treatment efficiency.

Application prospects of graphene in environmental science

Nanomaterials and graphene, as cutting-edge materials, have play a crucial role in environmental governance. The introduction of nanomaterials brings new hope to environmental governance. Graphene not only improves the efficiency and cost-effectiveness of water treatment but also drives innovation and development in environmental technologies. This article provides a summary and analysis review starting from the characteristics of nanomaterials and Graphene, comprehensively reviewing Graphenes advantage in environmental technologies and discovered its application in this area. The research summarized the conclusion that Graphenes characteristics make it suitable for addressing environmental issues such as water pollution, its composites can play an important role in water treatment process including water purification, heavy metal adsorption, organic compound adsorption and removal through different preparation and reaction mechanisms. By introducing Nanopore structures and artificially designed stacking structures on graphene membranes, the permeation performance could be modulated and improved. By the way of physical and chemical adsorption, ion exchange, electrochemical and photocatalysis, Graphene and its oxide could be applied to remove heavy metal ion and organic substances from polluted water. The article also introduced the main preparation methods of Graphene and its potential secondary pollution problem. This article provides valuable insights for scientific research and engineering practices in environmental protection and sustainable development.

Multi-laser nanoparticle tracking analysis (NTA): A unique method to visualize dynamic (shear) and dynamic (Brownian motion) light scattering and quantify nonliving natural organic matter (NNOM) in environmental water

Application of simultaneous multi-laser nanoparticle tracking analysis (NTA) to environmental water samples to investigate nonliving natural organic matter (NNOM) is introduced as an innovative method for observing particles directly in their native media. Multi-laser NTA results of particle visualization, particle number concentration, and particle size distribution elucidated particle dynamics in low and high total dissolved solids (TDS) aqueous environmental samples. A pond water sample and concentrate from a reverse osmosis (RO) treatment process (Stage 1) had 1.3 × 108 and 5.62 × 1019 particles/mL, respectively, (at time = 0) after filtration at 0.45 μm. Beyond the traditional applications for this instrument, this research presents novel evidence-based investigations that probe the existence of supramolecular structures in environmental waters during turbulence or quiescence. The pond water sample exhibited time-dependent aggregation as the volume distribution shifted to greater diameter during quiescence, compared to turbulence. Disaggregation (increased numbers of particles over time) was noted in the >250 nm to <600 nm region, and aggregation of >450 nm particles was also noted in the quiescent RO concentrate sample, indicative of depletion of small particles to form larger ones. Multi-laser NTA and dynamic light scattering (DLS) capabilities were compared and contrasted. DLS and NTA are different (complementary) particle sizing techniques. DLS yielded more information about the physical hydrogel in the NNOM hierarchy whereas multi-laser NTA better characterized meta-chemical and chemical hydrogel characteristics. Operationalization of innovation—moving from fundamental investigations to application—is supported by implementing novel analytical instrumentation as we address issues involving climate change, drought, and the scarcity of potable water. Multi-laser NTA can be used as a tool to study and optimize complex water and wastewater treatment processes. Questions about water treatment efficiencies, membrane fouling, assistance of pollutant transport, and carbon capture cycles affected by NNOM will benefit from insights from multi-laser NTA.

Zero liquid discharge management: optimizing sustainable reverse osmosis desalination practices

This study introduces a Zero Liquid Discharge (ZLD) scheme for Reverse Osmosis (RO) desalination, integrating ultra-filtration pretreatment and Electrodialysis (ED) for brine concentration. The scheme divides brine reject into fractions, directing them to an electrolyser and evaporator powered by renewable energy sources. Notable findings include the treatment plant's capability to produce 792 cubic meters of fresh water daily, while decreasing salt concentration from 4,660 ppm to 30 ppm, showcasing efficient desalination. Additionally, recycling fractions of RO unit waste to various components enhances resource efficiency. The study highlights the daily production of 2,269.27 kg of hydrogen, coupled with minimal electricity consumption of 74,885.91 kWh, thereby improving overall energy efficiency. Furthermore, the utilization of solar energy significantly reduces reliance on fossil fuels, thereby promoting sustainability and mitigating the environmental impacts associated with traditional energy sources. Solar energy is a clean, renewable resource that helps decrease greenhouse gas emissions and other pollutants, contributing to cleaner air and a healthier planet. This shift towards renewable energy is crucial in addressing climate change and ensuring a sustainable future for generations to come. In the context of desalination, emphasizing environmental preservation and water security is paramount. Desalination processes, while providing essential fresh water in arid regions, often produce brine as a byproduct. The brine, with a high salt concentration of 13,648 ppm, poses a disposal challenge that can negatively impact marine ecosystems if not managed properly. This is where Zero Liquid Discharge (ZLD) systems come into play. With a ZLD index of 2.7%, these systems ensure that all wastewater is treated and reused, leaving no liquid waste behind. ZLD technology captures and recycles every drop of water, converting waste into reusable resources, thus minimizing environmental harm. The model showcased a significant decrease in brackish water extraction from 1,200 cubic meters per day to 871.52 cubic meters per day, marking a notable 27% reduction. These results highlight the promising effectiveness of the proposed ZLD scheme in enhancing the efficiency of brackish water treatment, demonstrating its potential to significantly reduce the demand for fresh water resources while achieving sustainable desalination practices. This article will present a detailed yet a simple description of reverse osmosis and ZLD, how do they correlate and how these two technologies represent the future of water treatment.

Mechanical Enhancement and Water Treatment Efficiency of Nanocomposite PES Membranes: A Study on Akçay Dam Water Filtration Application.

Polymeric membranes are widely used in water treatment because of their ease of fabrication and low cost. The flux and purification performance of membranes can be significantly improved by incorporating appropriate amounts of nanomaterials into the polymeric membrane matrices. In this study, neat poly(ether sulfone) (PES), PES/nano copper oxide (CuO), and PES/nano zinc oxide (ZnO) membranes are fabricated via phase inversion. The pure water flux of the neat PES membrane, which is 355.14 L/m2·h, is increased significantly with the addition of nano-CuO and nano-ZnO, and the pure water fluxes of the nanocomposite membranes vary in the range of 392.65-429.74 L/m2·h. Moreover, nano CuO and nano ZnO-doped PES nanocomposite membranes exhibit higher conductivity, color, total organic carbon, boron, iron, selenium, barium, and total chromium removal efficiencies than neat PES membranes. The membrane surfaces examined by Scanning Electron Microscopy (SEM) after water filtration revealed that those containing 0.5% wt. nano CuO and nano ZnO are more resistant to fouling than the membrane surfaces containing 1% wt. nano CuO and nano ZnO. Based on the results of this study, 0.5% wt. nano ZnO-doped PES membrane is found to be the most suitable membrane for use in water treatment due to its high pure water flux (427.14 L/m2·h), high pollutant removal efficiency, and high fouling resistance. When the mechanical properties of the membranes are examined, the addition of CuO and ZnO nanoparticles increases the membrane stiffness and modulus of elasticity. The addition of 0.5% and 1% for CuO leads to an increase in the modulus of elasticity by 57.95% and 324.43%, respectively, while the addition of 0.5% and 1% for ZnO leads to an increase in the modulus of elasticity by 480.68% and 1802.43%, respectively. At the same time, the tensile strength of the membranes also increases with the addition of nanomaterials.