Purification Efficiency Research Articles

Research Progress on the Removal of Contaminants from Wastewater by Constructed Wetland Substrate: A Review

Constructed wetlands (CWs) primarily achieve efficient wastewater purification through synergistic interactions among substrates, plants, and microorganisms. Serving as the structural foundation of the entire wetland system, substrates not only provide a growth medium for plants, but also serve as adhesive carriers for microorganisms and habitats for animal activities. Research on substrates has attracted considerable attention; however, in practical engineering applications, the selection of substrates often depend on personal experience, which may lead to significant gaps in the effectiveness of wetland systems in treating different characteristic contaminants. Therefore, it is of great significance to investigate the influence of substrates on the removal of contaminants in sewage and identify substrate materials with good physical and chemical properties to optimize the design and operation of CWs-based sewage-treatment systems and improve their purification efficiency. In this review, bibliometric analysis was conducted to using the Web of Science database and VOSviewer_1.6.20 software to assess the progress of research on CWs. This article provides a comprehensive overview of substrate types and characteristics based on recent research advancements in the field. Additionally, it discusses removal methods and the influence of factors related to conventional contaminants (COD, nitrogen, and phosphorus), heavy metals (HMs), fluorinated compounds, pharmaceuticals, personal care products (PPCPs), and microplastics. A thorough evaluation was conducted on the economic costs of various substrates and their ability to remove major contaminants from water bodies, providing a reference for the further development of wetland technology.

Efficient Sorting of Semiconducting Single-Walled Carbon Nanotubes in Bio-Renewable Solvents Through Main-Chain Engineering of Conjugated Polymers.

Conjugated polymer sorting is recognized as an efficient and scalable method for the selective extraction of semiconducting single-walled carbon nanotubes (s-SWCNTs). However, this process typically requires the use of nonpolar and aromatic solvents as the dispersion medium, which are petroleum-based and carry significant production hazards. Moreover, there is still potential for improving the efficiency of batch purification. Here, this study presents fluorene-based conjugated polymer that integrates diamines containing ethylene glycol chains (ODA) as linkers within the main chain, to effectively extract s-SWCNTs in bio-renewable solvents. The introduction of ODA segments enhances the solubility in bio-renewable solvents, facilitating effective wrapping of s-SWCNTs in polar environments. Additionally, the ODA within the main chain enhances affinity to s-SWCNTs, thereby contributing to increased yields and purity. The polymer achieves a high sorting yield of 55% and a purity of 99.6% in dispersion of s-SWCNTs in 2-Methyltetrahydrofuran. Thin-film transistor arrays fabricated with sorted s-SWCNTs solution through slot-die coating exhibit average charge carrier mobilities of 20-23 cm2V⁻¹ s⁻¹ and high on/off current ratios exceeding 105 together with high spatial uniformity. This study highlights the viability of bio-renewable solvents in the sorting process, paving the way for the eco-friendly approach to the purification of SWCNTs.

Activation of the Wnt/β-catenin signalling pathway enhances exosome production by hucMSCs and improves their capability to promote diabetic wound healing

BackgroundThe use of stem cell-derived exosomes (Exos) as therapeutic vehicles is receiving increasing attention. Exosome administration has several advantages over cell transplantation, thus making exosomes promising candidates for large-scale clinical implementation and commercialization. However, exosome extraction and purification efficiencies are relatively low, and therapeutic heterogeneity is high due to differences in culture conditions and cell viability. Therefore, in this study, we investigated a priming procedure to enhance the production and therapeutic effects of exosomes from human umbilical cord mesenchymal stem cells (hucMSCs). After preconditioning hucMSCs with agonists/inhibitors that target the Wnt/β-catenin pathway, we assessed both the production of exosomes and the therapeutic efficacy of the optimized exosomes in the context of diabetic wound healing, hoping to provide a safer, more stable and more effective option for clinical application.ResultsThe Wnt signalling pathway agonist CHIR99021 increased exosome production by 1.5-fold without causing obvious changes in the characteristics of the hucMSCs or the size of the exosome particles. Further studies showed that CHIR99021 promoted the production of exosomes by facilitating exocytosis. This process was partly mediated by SNAP25. To further explore whether CHIR99021 changed the cargo that was loaded into the exosomes and its therapeutic effects, we performed proteomic and transcriptomic analyses of exosomes from primed and control hucMSCs. The results showed that CHIR99021 significantly upregulated the expression of proteins that are associated with cell migration and wound healing. Animal experiments confirmed that, compared to control hucMSC-derived exosomes, CHIR99021-pretreated hucMSC-derived exosomes (CHIR-Exos) significantly accelerated wound healing in diabetic mice, enhanced local collagen deposition, promoted angiogenesis, and reduced chronic inflammation. Subsequent in vitro experiments confirmed that the CHIR-Exos promoted wound healing by facilitating cell migration, inhibiting oxidative stress-induced apoptosis, and preventing cell cycle arrest.ConclusionsThe Wnt agonist CHIR99021 significantly increased exosome secretion by hucMSCs, which was partly mediated by SNAP25. Notably, CHIR99021 treatment also significantly increased the exosomal levels of proteins that are associated with wound healing and cell migration, resulting in enhanced acceleration of wound healing. All of these results suggested that pretreatment of hucMSCs with CHIR99021 not only promoted exosome production but also improved the exosome therapeutic efficacy, thus providing a promising option for large-scale clinical implementation and commercialization.Graphical

Possibility and Prospects for Using Combined Coagulants-flocculants in the Urban Wastewater Treatment System

A method is proposed for producing a powdered combined reagent, including an aluminum-silicon coagulant-flocculant, a sorption material and an acidity regulator of treated wastewater, as well as using this reagent in the treatment system of multi-component urban wastewater treatment plants. It has been shown that the use of powdered reagents of various compositions ensures purification efficiency for suspended solids in the range from 66.1 to 94.1 %, and for COD – from 70.1 to 78.0 %.

A Novel Truncated CHAP Modular Endolysin, CHAPSAP26-161, That Lyses Staphylococcus aureus, Acinetobacter baumannii, and Clostridioides difficile, and Exhibits Therapeutic Effects in a Mouse Model of A. baumannii Infection.

Development of novel antibacterial agents is imperative due to the increasing threat of antibiotic-resistant pathogens. This study aimed to develop the enhanced antibacterial activity and in-vivo efficacy of a novel truncated endolysin, CHAPSAP26-161, derived from the endolysin LysSAP26, against multidrug-resistant bacteria. CHAPSAP26-161 exhibited higher protein purification efficiency in E. coli and antibacterial activity than LysSAP26. Moreover, CHAPSAP26-161 showed the higher lytic activity against A. baumannii with minimal bactericidal concentrations (MBCs) of 5-10 μg/ml, followed by Staphylococcus aureus with MBCs of 10-25 μg/ml. Interestingly, CHAPSAP26-161 could lyse anaerobic bacteria, such as Clostridioides difficile, with MBCs of 25-50 μg/ml. At pH 4-8 and temperatures of 4°C-45°C, CHAPSAP26-161 maintained antibacterial activity without remarkable difference. The lytic activity of CHAPSAP26-161 was increased with Zn2+. In vivo tests demonstrated the therapeutic effects of CHAPSAP26-161 in murine systemic A. baumannii infection model. In conclusion, CHAPSAP26-161, a truncated endolysin that retains only the CHAP domain from LysSAP26, demonstrated enhanced protein purification efficiency and antibacterial activity compared to LysSAP26. It further displayed broad-spectrum antibacterial effects against S. aureus, A. baumannii, and C. difficile. Our in vitro and in-vivo results of CHAPSAP26-161 highlights its promise as an innovative therapeutic option against those bacteria with multiple antibiotic resistance.

Partitioning purification, biochemical characterization, and milk coagulation efficiency of protease from a newly Streptomyces sp. isolate.

An actinobacteria strain was isolated from an olive waste mill and tested for protease production on skimmed milk media. The strain identification was achieved through both 16S rDNA sequencing and phenotypic characterization. The enzyme was purified using the ammonium sulfate/t-butanol three-phase partitioning (TPP) method, followed by characterization to investigate the effect of pH, temperature, and various chemical agents. Subsequently, the enzyme was assessed for its milk coagulation activity. The strain belonging to the Streptomyces genera, exhibits significant phylogenetic and phenotypic differences from the aligned species, suggesting its novelty as a new strain. The enzyme was best separated in the TPP aqueous phase with a 5.35 fold and 56.25% yield. Optimal activity was observed at pH 9.0 and 60°C, with more than half of the activity retained within the pH range of 7-10 over one hour. The protease demonstrated complete stability between 30 and 60°C. While metallic ions enhanced enzyme activity, EDTA acted as an inhibitor. The enzyme displayed resistance to H2O2, SDS, Tween 80, and Triton X-100. Notably, it was activated in organic solvents (ethyl acetate, petroleum ether, and xylene), maintaining > 75% of its original activity in butanol, ethanol, and methanol. Additionally, the enzyme yielded high milk coagulant activity of 11,478 SU/mL. The new Streptomyces sp. protease revealed high activity and stability under a wide range of biochemical conditions. Its use in the dairy industry appears particularly promising. Further industrial process investigations will be valuable in determining potential uses for this enzyme.

Study on adsorption and purification materials for ethylene in cold storage

In view of the lack of systematic quantitative and comparative studies on the purification effect of ethylene adsorbent in cold storage, starting from the selection of purification materials, this paper analyzed the purification effect of different zeolite materials on ethylene through a small test chamber, and screened out the best zeolite adsorbents used in self-made purification device. Combined with characterization analysis, purification efficiency evaluation and adsorption capacity of zeolite material, the removal performance of ethylene was investigated. The results showed that the zeolite samples with rough and porous surface showed better adsorption performance for ethylene. The larger the specific surface area and total pore volume, the stronger the adsorption capacity to ethylene. In addition, the presence of Na elements and mesoporous increased the exchange capacity and pore volume, which also played a certain role in the ethylene adsorption process. Experimental result demonstrates that clean air volume (CADR) of ethylene is 232 m3/h, the ethylene removal rate at 30 min is 98.19%, and the purification energy efficiency is 1.39. At the same time, the adsorption capacity of the selected zeolite sample is 1380.5 μg/g by dynamic adsorption experiment, and the service life of the filter element of the self-made purification device is estimated to be 166 days. This study can provide a theoretical basis for ethylene purification in cold storage.

Synergistic photocatalysis of oxygen-enriched vacancy BiOBr based on rice husk biochar: Efficient seawater purification achieved by carrier directional migration

Addressing seawater pollution is crucial for the efficient utilization of seawater resources. Employing solar-driven seawater purification emerges as an ideal solution for the future renewable energy landscape. Herein, biomass carbon and oxygen-enriched defect materials were selected to design a high-performance photocatalyst for seawater purification. The strategic combination of defect energy levels and electron-conducting carbon enhances the directional migration and separation of photogenerated particles, thereby boosting the overall photocatalytic efficiency in seawater purification. In the simulated seawater experiment, ROV-BOB/RHC-3 exhibits significant resistant to conventional ions interference during purification. Transitioning to real seawater experiments, ROV-BOB/RHC-3 exhibits impressive removal performance for RhB and TC, achieving substantial purification in 10 L of seawater under natural sunlight. Combine free radical trapping experiments and electron spin resonance (ESR) analysis shows that reactive oxygen species (•O2- and 1O2) are responsible in purification. The project provides a practical and effective basis for further research on efficient biomass carbon-based photocatalysts to seawater purification.

Phytoremediation of formaldehyde by three selected non-native indoor plant species

Formaldehyde is an organic volatile compound and a commonly used chemical in various construction materials thus causing dwellers to be exposed to it inside a building. Its remediation from indoor air has been carried out through various techniques where potted plants and living walls are at the front foot. It is necessary to study plants under various conditions for their efficiency. We selected three plant species Epipremnum aureum, Chlorophytum comosum, and Spathiphyllum wallisii non-native of Bahrain. These plants were tested under normal conditions in a sealed fumigation box where formaldehyde concentration was kept ∼3 ppm, CO2 ∼ 450 ppm, light intensity 1000 Lx (equal to 13.5 µmol.m−2.s−1), irrigated with tap water. Analysis of Variance (ANOVA) statistical method was performed to test the significant differences of purification efficiencies of the tested indoor plants against HCHO. In addition, the statistical method was used to test the significant difference, if any, of the plants to CO2 emission because of absorbing HCHO. The physical health of plants and their short-term remediation ability reveals that all plants exhibited up to 70% remediation potential and tolerance to remediate the target chemical. It is evident that the impact of local environmental factors on the plants is negligible.

Natural-inspired hierarchic double-Janus solar evaporator for stable clean water production from high-salinity emulsions

Interfacial solar evaporation shows great potential in clean water production, emulsions separation, and high-salinity brine treatment. However, it remains challenging for the evaporators to maintain a high evaporation rate in the high-salinity emulsions due to the co-pollution of salt and oil. Herein, we first proposed a hierarchic double-Janus solar evaporator (HDJE) with a hydrophobic salt-rejecting top layer and oil-rejecting bottom layer. Compared to the traditional one, HDJE could treat industrial high-salinity oil-in-water emulsions stably for over 70 h, with a stable average evaporation rate of 1.73 kg m−2 h−1 and a high purification efficiency of up to 99.8 % for oil and ions. It was also verified that HDJE could be used for high-efficiency purification of oily concentrated seawater outdoor. An average water production rate of 3.59 kg m−2 d−1 and a TOC removal ratio of over 98 % was obtained. In conclusion, this study provides a novel way to effectively dispose of high-salinity oily wastewater.

Advanced design and optimization of tailored refining fluxes for the purification of Mg–Li alloys

This study systematically investigates the influence of integrating KCl into the refining flux on the purification efficiency of Mg–Li alloy. The findings reveal that an optimal purification effect is achieved with a 50 % addition of KCl to the refining flux, resulting in a remarkable 56 % reduction in volume fraction of inclusions to 0.17 % and an 80 % improvement in elongation to 29.1 %. The developed novel quaternary refining flux is composed of KCl + LiCl + LiF + CaF2 (3:3:1:2, wt.%). Based on thermodynamic calculation and analysis, the purification mechanism is elucidated, demonstrating that KCl enhances purification efficiency by reducing flux and melt viscosity, improving wettability, increasing contact area, and facilitating flux adsorption on inclusions. Excessive KCl addition hinders purification by decreasing flux density, slowing settling velocity, and affecting the purification process. The quaternary flux, applying to industrial Mg–Li alloy scrap, demonstrates outstanding purification performance with a 73 % reduction in inclusion volume fraction to 0.33 % and a remarkable 584 % increase in elongation to 17.1 %. The development and application of a novel Mg–Li alloy flux are of significant importance for promoting the industrial development of Mg–Li alloys.

Leaching kinetics of ash impurities from aphanitic graphite by combining dual-ultrasound and hydrochloric acid–potassium hydrogen fluoride

The hydrochloric acid-fluoride salt is useful for purifying graphite. Ultrasonic-assisted technique can significantly reduce the leaching time and improve the leaching efficiency. Compared with single-frequency, dual-frequency ultrasound has the advantages of high energy efficiency and wide cavitation area. In this study, the combination of a dual-frequency ultrasound-assisted technique and hydrochloric acid–potassium hydrogen fluoride leaching agent was proposed for the leaching of aphanitic graphite to remove impurity minerals. First, the effects of probe-type ultrasonic power, tank-type ultrasonic power, temperature, HCl concentration, ultrasonication time, and KHF2 concentration on the purification efficiency of impurities from aphanitic graphite with the assistance of dual-frequency ultrasound were investigated. It was found that the combination of dual-frequency ultrasound and hydrochloric acid–potassium hydrogen fluoride can reduce the ash content of aphanitic graphite from 13.02 % to 1.02 % with an ash removal rate of 94.17 %. Second, volumetric reaction models and unreacted shrinkage nucleation models were used to fit the kinetics of impurities from aphanitic graphite with dual-frequency ultrasound-assisted HCl-KHF2 leaching. Kinetic analysis shows that the volumetric reaction model with chemical control was better to fit the leaching process. This is consistent with the calculation results of the activation energy of the reaction (Ea = 58.13 kJ/mol). Finally, laser particle size analyzer, X-ray diffraction (XRD), scanning electron microscopy-energy dispersive X-ray spectroscopy (SEM-EDS), X-ray fluorescence spectroscopy (XRF), transmission electron microscopy-energy dispersive X-ray spectroscopy (TEM-EDS) were used to analyze the fugacity of impurity minerals during the process of dual-frequency ultrasound-assisted HCl-KHF2 leaching. It was revealed that combining ultrasonic cavitation fragmentation with chloric acid–potassium fluoride generated SiF4 with high solubility, thereby removing silica-bearing impurities more efficiently. The challenges in further reducing ash content from 1.02 % in the leached concentrate of aphanitic graphite could be attributed to the existence of titanium-bearing mineral impurities on the surface of graphite particles and the presence of silica-bearing minerals between graphite carbon layers.

Homogenous Oxidizing Oligomerization Coupled with Coagulation for Water Purification

Natural manganese oxides could induce the intermolecular coupling reactions among small-molecule organics in aqueous environments, which is one of the fundamental processes contributing to natural humification. These processes could be simulated to design novel advanced oxidation technology for water purification. In this study, periodate (PI) was selected as the supplementary electron-acceptor for colloidal manganese oxides (Mn(IV)aq) to remove phenolic contaminants from water. By introducing polyferric sulfate (PFS) into the Mn(IV)aq/PI system and exploiting the flocculation potential of Mn(IV)aq, a post-coagulation process was triggered to eliminate soluble manganese after oxidation. Under acidic conditions, periodate exists in the H4IO6− form as an octahedral oxyacid capable of coordinating with Mn(IV)aq to form bidentate complexes or oligomers (Mn(IV)-PI*) as reactive oxidants. The Mn(IV)-PI* complex could induce cross-coupling process between phenolic contaminants, resulting in the formation of oligomerized products ranging from dimers to hexamers. These oligomerized products participate in the coagulation process and become stored within the nascent floc due to their catenulate nature and strong hydrophobicity. Through coordination between Mn(IV)aq and H4IO6−, residual periodate is firmly connected with manganese oxides in the floc after coagulation and could be simultaneously separated from the aqueous phase. This study achieves oxidizing oligomerization through a homogeneous process under mild conditions without additional energy input or heterogeneous catalyst preparation. Compared to traditional mineralization-driven oxidation techniques, the proposed novel cascade processes realize transformation, convergence, and separation of phenolic contaminants with high oxidant utilization efficiency for low-carbon purification.

Sustainable deep eutectic solvents induced the polymorph selectivity and high purification efficiency

Deep eutectic solvents (DESs), as modern green solvents, have been examined as sustainable crystallization media in recent years. Nevertheless, their roles in affecting nucleation and polymorph control of crystal materials are still poorly understood. Herein, we report the use of DES for controlling polymorph crystallization and investigate systematically the mechanism of DES solvent characteristics on polymorph selectivity. Concomitant crystallization of sulfathiazole (STZ) polymorphs has been widely reported in organic solvents, while we found DES can improve its polymorph selectivity significantly. Pure forms II and IV were selectively and rapidly obtained from solvents containing [thymol][fatty acid] and [thymol][coumarin] DESs, respectively. The microstructural changes of DES exhibited dynamic regulatory effect on STZ polymorph selectivity. Analysis of 1H NMR, viscosity and computational simulations revealed that the DES hydrogen-bonding network structures were preserved for DES contents above 50 wt% in binary solvents, which affected the nucleation kinetics of STZ and its molecular assembly during crystallization process. Further mechanistic investigations suggested that DES hydrogen-bonding network structures exerted confinement effect and nucleation-templating effect through DES-solute interactions (hydrogen-bonding and π-π stacking interactions for [thymol][fatty acid] and [thymol][coumarin] systems, respectively), which limited the motion of solute molecules and delayed nucleation rate as well as induced the STZ nucleation toward specific orientations, thus achieving polymorph selectivity. In addition, DESs could be recycled and exhibited good reproducibility in achieving STZ polymorph purification. This study offers a sustainably effective strategy for polymorph purification of crystalline materials and promotes advance the fundamental understanding of DES solvent characteristics on polymorph control.

Metal Sulfide‐Based Nanoarchitectures for Energetic and Environmental Applications

Despite their numerous excellent properties, metal sulfides are not particularly efficient at converting energy and purifying the environment, which limits their further applications. Fortunately, the energy conversion and environmental purification efficiencies of these materials have experienced notable advancements in recent years, accompanied by an improved understanding of their underlying mechanisms. Herein, progress in experimental researches in recent years on the engineering of single component metal sulfides by controlling morphology, construction of heterojunctions, and incorporating elements is reviewed. Methods to design and prepare metal sulfide‐based composites by building binary or ternary heterojunctions of metal sulfide/semiconductor/conductor are also discussed in detail. These materials are used in energy conversion and environmental purification systems, where they act as photocatalytic materials not only to split water, reduce carbon dioxide or nitrogen, but also to degrade pollutants (organic and inorganic) in water and gas. Finally, it is concluded by summarizing the research frontiers of metal sulfide nanomaterials in energy and environmental applications, as well as proposing potential challenges and future research directions. This work may contribute to a better understanding of metal sulfide nanocomposites and provide clues for the fabrication of more efficient metal sulfide‐based nanostructures for clean energy production and environmental remediation.

Fabrication of 3D aligned porous nanocellulose-based aerogel for enrichment of the histidine-containing polypeptides

The high-throughput immobilized metal affinity chromatography (IMAC) material is urgently required to improve the efficiency of separation and purification of tagged peptides in related biomedical applications. Herein, the amino-thiourea-modified nanocellulose (S-TOCN) -polyvinyl alcohol (PVA) composite aerogel with aligned pores was prepared by a directional freeze-casting technique and then used to immobilize metal ions (M2+) for the selective separation and purification of histidine-containing peptides from protein hydrolysates. The obtained S-TOCN-PVA materials with an oriented porous structure exhibited excellent mechanical properties, good adsorption performance, and reusability under optimal conditions. The adsorption capacity of the S-TOCN-PVA aerogel for metal ions was as follows: Cu2+>Ni2+>Zn2+>Co2+, and the higher metal ion chelating amount of the S-TOCN-PVA composite aerogel for Cu2+ and Ni2+ reached 87.21 mg/g at pH=7 and 83.66 mg/g at pH=6 in the 2 h incubation period, respectively. The enrichment effects of Cu2+/S-TOCN-PVA and Ni2+/S-TOCN-PVA aerogels with the selectivity of His-containing peptides from apricot kernel protein hydrolysates were up to 3.99 folds and 4.81 folds, respectively, for one cycle. Furthermore, after 5cycles, the Ni2+/S-TOCN-PVA aerogels remained at 87.5% of their initial adsorption capacity (848 mg/g), and the concentration increased by 39.05-fold. Molecular docking simulations show that the oxygen of the carboxyl group (-C-O and -CO) and the hydrogen of the imidazole group on the His molecule are mainly bonded to the hydrogen of the amino groups and the oxygen of the carboxyl group (C-O-C) in the structure of M2+/S-TOCN-PVA aerogels. The fabricated metal ion-immobilized 3D-aligned porous nanocellulose-based aerogels are promising IMAC materials for efficient separation and purification of the histidine-containing polypeptides from complicated biological samples.

Double-layered cellulosic interfacial evaporator via upcycling of waste cotton fabrics for efficient solar desalination

Constructing efficient solar-driven interfacial evaporators (SDIEs) derived from biomass or waste stream materials (e.g., cellulose) is still challenging due to their less elaborate porous structure. Herein, we showed waste cotton fabrics could be dissolved and regenerated into aerogels with tunable channels suitable for constructing a double-layered SDIE. The evaporator consists of a polypyrrol-coated top layer featuring vertical channels with larger pores and a hydrophilic bottom layer featuring smaller pores. With such design, the photothermal and pro-evaporative capabilities of the top layer was coupled with the strong capillary effect of the bottom layer to drive effective evaporation. A desirable evaporation rate of 3.20 kg m−2h−1, 80.0% solar-to-vapor conversion efficiency under 1 sun irradiation, and a reduced evaporation enthalpy of 962 J g−1 was achieved. The SDIE also exhibits high purification efficiency (exceeding 99%) during long-term operation of seawater desalination and shows great potential in treatment of waste streams of high salinity dyeing effluent. In summary, this work demonstrates a case of upcycling waste cotton fabrics for water desalination.

New insights into antifouling property and interfacial mechanism in photo-Fenton membrane distillation

Membrane distillation (MD), boasting high interception efficiency and low operational pressures, emerges as an innovative membrane technology. However, the occurrence of membrane fouling due to interaction between natural organic matter (NOM) and inorganic ions during the MD process curtails water purification efficiency, thereby constraining its potential applications. To address this quandary, this study integrates sulfate radical-based advanced oxidation processes (SR-AOPs) into MD technology to bolster membrane fouling control. A straightforward hydrothermal method coupled with vacuum filtration was employed to synthesize a Co3O4/Nitrogen-modified carbon quantum dots (NCDs)/PVDF (CN-PVDF) membrane for the first time, which was utilized in the MD treatment of simulated humic acid (HA) wastewater. Under visible light irradiation (1.9 kW/m2), CN-PVDF membrane activation of peroxymonosulfate (PMS) effectively altered the chemical attributes of the MD feed solution and reduced organic matter concentration. Moreover, it dismantled the carboxyl sites on HA that interact with Ca2+, consequently attenuating the formation of organic–inorganic complex pollutants. The XDLVO analysis showcased that photo-Fenton oxidation led to a diminishment in pollutant hydrophobicity, correlating with a 17.59 kT reduction in pollutant-membrane adsorption and a 7.47 kT amplification in adhesion barriers. This strategy transformed the initial two-stage fouling mode into a singular one, which significantly decreased the flux decline and the fouling layer thickness. Furthermore, the CN-PVDF membrane demonstrated self-cleaning capabilities via photo-Fenton. This study advances an innovative approach to bolster the fouling resistance of MD membranes and provides substantial theoretical support for the integration of SR-AOPs and MD technologies.

Quartz Crystal Microbalance as a Holistic Detector for Quantifying Complex Organic Matrices during Liquid Chromatography: 2. Compound-Specific Isotope Analysis.

In carbon-compound-specific isotope analysis (carbon CSIA) of environmental micropollutants, purification of samples is often required to guarantee accurate measurements of a target compound. A companion paper has brought forward an innovative approach to couple a quartz crystal microbalance (QCM) with high-performance liquid chromatography (HPLC) for the online quantification of matrices during a gradient HPLC purification. This work investigates the benefit for isotope analysis of polar micropollutants typically present in environmental samples. Here, we studied the impact of the natural organic matter (NOM) on the isotopic integrity of model analytes and the suitability of the NOM-to-analyte ratio as a proxy for the sample purity. We further investigated limitations and enhancement of HPLC purification using QCM on C18 and C8 phases for single and multiple targets. Strong isotopic shifts of up to 3.3% toward the isotopic signature of NOM were observed for samples with an NOM-to-analyte ratio ≥10. Thanks to QCM, optimization of matrix removal of up to 99.8% of NOM was possible for late-eluting compounds. The efficiency of HPLC purification deteriorated when aiming for simultaneous purification of two or three compounds, leading to up to 2.5% less NOM removal. Our results suggest that one optimized HPLC purification can be achieved through systematic screening of 3 to 5 different gradients, thereby leading to a shift of the boundaries of accurate carbon CSIA by up to 2 orders of magnitude toward lower micropollutant concentrations.

Underwater light source changes microecosystem constructed by Vallisneria spinulosa Yan for water restoration: Efficiency of water purification, characteristics of growth, and rhizosphere

Submerged macrophytes are effective in ecological restoration of water bodies polluted by nitrogen and phosphorus, and its restoration capacity depends on underwater illumination condition. This study explored the influencing mechanism of illumination on Vallisneria spinulosa Yan (V. spinulosa Yan) for water restoration. Addition of underwater light source increased the total nitrogen, ammonia nitrogen, total phosphorus, and phosphate removal loads of the V. spinulosa Yan growth system by 61.5, 39.2, 8.5, and 5.0 mg m−2 d-1, respectively. Meanwhile, the growth of V. spinulosa Yan was obviously promoted, even with high water turbidity. Although the biological nitrogen removal processes were inhibited by adding underwater light source, the growth of V. spinulosa Yan can be significantly improved, thus enhancing the efficiency of water purification via the absorption of nitrogen and phosphorus by V. spinulosa Yan. This study provides a theoretical foundation and technical support for application of submerged macrophytes in ecological water restoration.