Efficient Hydrogen Production Research Articles

In situ Construction of Single-Atom Electronic Bridge on COF to Enhance Photocatalytic H2 Production.

Photocatalytic hydrogen production is one of the most valuable technologies in the future energy system. Here, we designed a metal-covalent organic frameworks (MCOFs) with both small-sized metal clusters and nitrogen-rich ligands, named COF-Cu3TG. Based on our design, small-sized metal clusters were selected to increase the density of active sites and shorten the distance of electron transport to active sites. While another building block containing nitrogen-rich organic ligands acted as a node that could in situ anchor metal atoms during photocatalysis and form interlayer single-atom electron bridges (SAEB) to accelerate electron transport. Together, they promoted photocatalytic performance. This represented the further utilization of Ru atoms and was an additional application of the photosensitizer. N2-Ru-N2 electron bridge (Ru-SAEB) was created in situ between the layers, resulting in a considerable enhancement in the hydrogen production rate of the photocatalyst to 10.47 mmol g-1 h-1. Through theoretical calculation and EXAFS, the existence position and action mechanism of Ru-SAEB were reasonably inferred, further confirming the rationality of the Ru-SAEB configuration. A sufficiently proximity between the small-sized Cu3 cluster and the Ru-SAEB was found to expedite electron transfer. This work demonstrated the synergistic impact of small molecular clusters with Ru-SAEB for efficient photocatalytic hydrogen production.

Performance evaluation and multi-objective optimization of hydrogen-based integrated energy systems driven by renewable energy sources

This study proposes an integrated energy system using hydrogen storage to realize the efficient utilization of renewable energy sources and reduce the fluctuation when renewable energy is connected to grid. The system utilizes solar and wind energy to realize hydrogen production, desalination, and CCHP. First, the energy, exergy, and economic evaluations for the proposed system are carried out, and then an in-depth analysis of the key operating parameters is performed. The system achieves energy efficiency, exergy efficiency, and cost rate of 48.49 %, 19.98 %, and 7.969 $/h, respectively. And the exergy analysis shows that the main exergy destructions are caused by the parabolic trough solar collector and the transcritical CO2 power cycle. The parametric analysis demonstrates when solar radiation flux and wind speed increase, the exergy efficiency and hydrogen production are increased, but the cost rate is increased accordingly. Finally, two sets of multi-objective optimization schemes are performed combining the artificial neural network with the Non-dominant genetic algorithm-II. For the optimized fresh water output, cost rate, and exergy efficiency, it is achieving improvements of 51.73 %, 8.4 %, and 3.6 %, and for the optimized hydrogen production, cost rate, and exergy efficiency, it is increased by 12.53 %, 0.564 %, and 0.75 %, respectively.

Transition metal-modified armchair graphene network for high-performance hydrogen evolution reaction catalysts

This study explores the structural, electronic, and catalytic properties of armchair hexagonal graphene networks (AHGN) modified with single transition metal (TM) atoms from Period V. Substitutions of Ag, Mo, Nb, Pd, Rh, Ru, Tc, Y, and Zr were investigated, revealing significant changes in bond lengths, bond angles, and dihedral angles. The binding energies indicate that TM substitutions do not drastically destabilize AHGN, suggesting potential applications requiring modified electronic properties. Electronic investigations showed that TM substitutions influence the partial density of states (PDOS) and energy gaps (ΔE), with Tc significantly reducing ΔE, indicating a shift towards metallic behavior. Mulliken charge analysis highlighted the electron density redistribution around TM atoms and edge carbons, enhancing electronic conductivity and chemical reactivity. Based on the results, AHGN-Rh-H, AHGN-Pd-H, and AHGN-Mo-H demonstrate the most efficient catalytic performance for the hydrogen evolution reaction (HER), with ΔG values comparable to platinum, underscoring their potential for practical hydrogen production applications. Conversely, materials like AHGN-Nb-H and AHGN-Zr-H exhibit higher ΔG values, indicating lower efficiency for HER. Global reactivity parameters (GRPs) analysis revealed AHGN-Tc with the most negative chemical potential (−4.010 eV) and highest electronegativity (4.010 eV), indicating strong electron-accepting and electron-attracting abilities. These findings underscore the potential of TM-substituted AHGN for advanced electronic applications and efficient hydrogen production.

Optimal operation control strategy for off-grid photovoltaic hydrogen production system considering hydrogen production efficiency

Off-grid photovoltaic hydrogen production is an effective solution for improving photovoltaic (PV) utilization and obtaining green hydrogen. The main challenge faced by off-grid photovoltaic hydrogen production systems (OGPHPS) is how to deal with the randomness, intermittency, and volatility of PV generation. Therefore, this paper proposes an optimal operation control strategy (OOCS). First, a model of OGPHPS is established, comprising photovoltaics, batteries, and an electrolytic array (ELA). Second, a two-step optimization strategy (TSOS) that integrates both long-term and short-term time scales is proposed. In the first step of TSOS, the day-ahead optimization of the operation state of ELA is conducted according to day-ahead power prediction. A constraint was proposed to balance the operation time of the electrolyzer. In the second step of TSOS, according to the ultra-short time power prediction and the electrolyzer efficiency curve, the rolling optimization of the operating power distribution of ELA is carried out. Through TSOS, PV generation consumption is maximized by ELA, the continuous operational stability of OGPHPS is enhanced, and the lifespan of electrolyzer is extended. Third, to alleviate the influence of instantaneous power fluctuation on the system, an energy management strategy (EMS) for OGPHPS is proposed. Finally, a simulation model of OGPHPS was established, and the simulation results showed that the direct current bus voltage fluctuation was within 3%. Compared to the chain allocation strategy, the OOCS achieves higher hydrogen production under the same solar irradiance conditions. Particularly in low irradiance, OOCS has more sufficient consumption of PV generation and higher hydrogen production efficiency.

Hydrogen cultivation through an integrated ranking cycle and proton exchange membrane with an evacuated tube collector powered by hybrid nanofluids

This study integrates nanotechnology into renewable energy systems representing innovation in infrastructure development, crucial for sustainable industrial growth. The study addresses a critical need in renewable energy technology: enhancing hydrogen production rates through more efficient integration of solar thermal systems with Proton Exchange Membrane (PEM) electrolyzers and aligning the alignment with several Sustainable Development Goals 7, 9, and 13. By improving the efficiency of hydrogen production from renewable sources like solar energy, the study contributes to achieving sustainable energy solutions. The primary aim of the study is to investigate and demonstrate the efficacy of integrating an Evacuated Tube Solar Collector (ETSC) with a PEM electrolyzer, enhanced by nanofluids. Specifically, the study explores how nanotechnology can improve thermal performance and subsequently increase hydrogen production rates, particularly through Multi-walled carbon nanotubes (MWCNT), Magnesium oxide (MgO), and their hybrid. The nanoparticles such as MWCNT, and MgO were chosen at 0.1% concentration and the hybrid was 0.05% of each nanoparticle was chosen. The ranking cycle comprises the low, and high-pressure turbine for PEM electrolyzer. The result of the hybrid nanofluid in the ETSC circuit shows appreciable thermal performance than base fluid and standalone nanofluid. The peak outlet temperature by nanofluid is about 65.8oC, 71.0oC, and 78.5oC by MWCNT, MgO, and hybrid nanofluid which is higher than Thermal oil respectively. The peak collector efficiency enhancement is about 80.5% by integrating a hybrid nanofluid in an ETSC circuit. Similarly, the exergy efficiency was increased from 12.4% to 36.8 by using a hybrid nanofluid in the ETSC circuit. The peak PEM electrolyzes energy, and exergy efficiency is about 44.4%, and 10.5% through the use of hybrid MWCNT/MgO nanofluid. The hydrogen production rate was increased from 6.8% to 29.7% when the hybrid nanofluid was used.

In situ ammonium formation mediates efficient hydrogen production from natural seawater splitting

Seawater electrolysis using renewable electricity offers an attractive route to sustainable hydrogen production, but the sluggish electrode kinetics and poor durability are two major challenges. We report a molybdenum nitride (Mo2N) catalyst for the hydrogen evolution reaction with activity comparable to commercial platinum on carbon (Pt/C) catalyst in natural seawater. The catalyst operates more than 1000 hours of continuous testing at 100 mA cm−2 without degradation, whereas massive precipitate (mainly magnesium hydroxide) forms on the Pt/C counterpart after 36 hours of operation at 10 mA cm−2. Our investigation reveals that ammonium groups generate in situ at the catalyst surface, which not only improve the connectivity of hydrogen-bond networks but also suppress the local pH increase, enabling the enhanced performances. Moreover, a zero-gap membrane flow electrolyser assembled by this catalyst exhibits a current density of 1 A cm−2 at 1.87 V and 60 oC in simulated seawater and runs steadily over 900 hours.

Optimization of Hydrogen Production System Performance Using Photovoltaic/Thermal-Coupled PEM

A proton exchange membrane electrolyzer can effectively utilize the electricity generated by intermittent solar power. Different methods of generating electricity may have different efficiencies and hydrogen production rates. Two coupled systems, namely, PV/T- and CPV/T-coupling PEMEC, respectively, are presented and compared in this study. A maximum power point tracking algorithm for the photovoltaic system is employed, and simulations are conducted based on the solar irradiation intensity and ambient temperature of a specific location on a particular day. The simulation results indicate that the hydrogen production is relatively high between 11:00 and 16:00, with a peak between 12:00 and 13:00. The maximum hydrogen production rate is 99.11 g/s and 29.02 g/s for the CPV/T-PEM and PV/T-PEM systems. The maximum energy efficiency of hydrogen production in CPV/T-PEM and PV/T-PEM systems is 66.7% and 70.6%. Under conditions of high solar irradiation intensity and ambient temperature, the system demonstrates higher total efficiency and greater hydrogen production. The CPV/T-PEM system achieves a maximum hydrogen production rate of 2240.41 kg/d, with a standard coal saving rate of 15.5 tons/day and a CO2 reduction rate of 38.0 tons/day. Compared to the PV/T-PEM system, the CPV/T-PEM system exhibits a higher hydrogen production rate. These findings provide valuable insights into the engineering application of photovoltaic/thermal-coupled hydrogen production technology and contribute to the advancement of this field.

Nanoscale engineering of semiconductor photocatalysts boosting charge separation for solar-driven H2 production: Recent advances and future perspective

Abstract Photocatalytic hydrogen (H₂) production is regarded as an efficient method for generating renewable energy. Despite recent advancements in photocatalytic water splitting, the solar-to-hydrogen conversion efficiency of photocatalysts remains well below the 10% target needed for commercial viability due to ongoing scientific challenges. This review comprehensively analyzes recent advancements in nanoscale engineering of photocatalytic materials, emphasizing techniques to enhance photogenerated charge separation for efficient solar hydrogen production. Here we highlight the nanoscale engineering strategies for effective charge separation including crystal engineering, junction engineering, doping-induced charge separation, tailoring optoelectronic properties, hierarchical architecture, defects engineering, various types of heterojunctions, and polarity-induced charge separation, and discuss their unique properties including ferroelectric on spatial charge separation along with the fundamental principles of light-induced charge separation/transfer mechanisms, and the techniques for investigation. This study, critically assesses strategies for effective photogenerated charge separation to enhance photocatalytic hydrogen production and offers guidance for future research to design efficient energy materials for solar energy conversion.

3D printer fabrication of boron doped Cu-MWCNT/PLA electrodes: Investigation of its efficiency in electrocatalytic hydrogen production

In this study, three-dimensional (3D) electrodes based on MWCNT-Cu/PLA with high electrocatalytic efficiency, large surface area and different amounts of nano‑boron doped MWCNT-Cu/PLA were fabricated using Fused Granular Fabrication (FGF) method with a 3D printer. When FE-SEM images are examined, MWCNT fibers and copper particles are seen more clearly on the surface due to the formation of more dense conductive networks between the conductive carbon fibers trapped in the PLA structure due to the increasing amount of boron. When XRD results are examined, it is observed that the characteristic peaks belonging to the face-centered cubic structure of Cu are dominant and the crystal size increases as MWCNT addition and boron doping increase. When Raman spectra were analyzed to investigate the internal structural changes of MWCNTs, three characteristic bands corresponding to the D band (defect), G band (graphite band) and G' band (D overtone) of MWCNTs were determined and it was observed that the ID/IG ratio decreased with increasing boron doping compared to MWCNT-Cu/PLA electrode. The B1s spectrum of the 3D 0.8B@MWCNT-Cu/PLA electrode confirmed the presence of boron with the peak corresponding to B@C bonds at 191.2 eV. The obtained 3D electrocatalysts were used as cathodes in an electrolysis cell in aqueous solution containing 1 M KOH and their catalytic efficiency in hydrogen evolution reaction (HER) was tested. In order to increase the activity of the 3D electrodes, unlike the literature, they were activated by electrochemical activation process without using organic solvent and HER measurements of the activated electrodes were performed. Before activation, the charge transfer resistance (Rct) value of the Cu/PLA electrode, which was 6219.00 Ω cm−2, decreased to 681.90 Ω cm−2 after 5 % MWCNT doping. It is seen that with boron doping, a greater decrease in Rct value is realized, reaching values of 66.50–74.56 Ω cm−2. The cathodic Tafel slopes show that the Volmer reaction is the rate-determining step for HER and the rate-determining step is the electrochemical adsorption of hydrogen on the metal surface. In addition, energy efficiency tests of the 3D electrodes in HER were also performed and electrochemically active surface areas were determined. Thus, this study has taken an important step toward using 3D electrocatalysts, which are produced with more cost and more flexible designs, unlike previous production techniques, for hydrogen energy production.

Polyoxometalate‐Derived Photocatalysts Enabling Progress in Hydrogen Evolution Reactions

AbstractPhotocatalytic water splitting is capable of converting abundant solar energy into environmentally friendly and renewable chemical energy, presenting a promising solution to alleviate the energy crisis and combat environmental pollution. The development of high‐performance photocatalysts is crucial for significantly improving the efficiency of the hydrogen evolution reaction (HER) involved. Polyoxometalate (POM)‐derived materials, known for their tunable compositions, diverse structures, electron storage/release capabilities, as well as quasi‐semiconductor photochemical properties, serve as highly efficient catalysts in sustainable photosynthesis. This comprehensive review navigates the latest advancements in the assembly strategies and HER performance of POM‐based crystalline materials. It also discusses the composite materials formed by infiltrating POM into metal‐organic frameworks (MOF) and examines the roles of transition metal compounds derived from polyoxometalates, such as sulfides and carbides, in photocatalytic HER. Emphasis is placed on the prospects for the future development of POM‐based compounds as photocatalysts, along with several strategies and outlooks that could facilitate their progress. POM‐derived materials are believed to have significant potential to enhance hydrogen production efficiency while maintaining thermal stability in HER processes.

Engineered self-assembled protein nanosheets for in situ biosynthesis of peptide anchored protein-semiconductor hybrids for efficient hydrogen production

Catalytic hydrogen production using solar energy is of great significance in addressing the global energy crisis. Herein, an efficient artificial photocatalytic hydrogen production system based on hierarchical protein self-assembly is designed and developed by in situ biosynthesis of peptide-anchored protein-semiconductor hybrids. The self-grown protein-CdS quantum dot hybrids stabilize and array orderly by the predesigned bioengineered proteins assembled into monolayer nanosheets, perfectly mimicking both the structure and function of the natural photosynthetic system. By mild deposition of Pt nanoparticles, the photocatalytic hydrogen production performance of the system is further enhanced to 69100 μmolh−1 (Cd2+) g −1, 80 times the catalytic activity of free CdS. Remarkably, the protein 2D network effectively enhances the water solubility, dispersibility, and solution stability of the inorganic catalytic centers, affording efficient photocatalytic hydrogen evolution. The system maintains 91.2 % catalytic efficiency after 30 days. Furthermore, its hydrogen production rate can be artificially regulated between 69100 and 52100 μmolh−1 (per g Cd2+) by the assembly-disassembly process of the protein templates. Thus, our work showcases the importance of the protein template and its assembly in maintaining the structural stability and high catalytic performance of the photocatalytic system and provides promising ideas for the simulation of natural photosynthetic systems.

Carbon nanomaterials for efficient oxygen and hydrogen evolution reactions in water splitting: A review

Water splitting has gained significant attention as a means to produce clean and sustainable hydrogen fuel through the electrochemical or photoelectrochemical decomposition of water. Efficient and cost-effective water splitting requires the development of highly active and stable catalysts for the oxygen evolution reaction (OER) and hydrogen evolution reaction (HER). Carbon nanomaterials, including carbon nanotubes, graphene, and carbon nanofibers, etc., have emerged as promising candidates for catalyzing these reactions due to their unique properties, such as high surface area, excellent electrical conductivity, and chemical stability. This review article provides an overview of recent advancements in the utilization of carbon nanomaterials as catalysts or catalyst supports for the OER and HER in water splitting. It discusses various strategies employed to enhance the catalytic activity and stability of carbon nanomaterials, such as surface functionalization, hybridization with other active materials, and optimization of nanostructure and morphology. The influence of carbon nanomaterial properties, such as defect density, doping, and surface chemistry, on electrochemical performance is also explored. Furthermore, the article highlights the challenges and opportunities in the field, including scalability, long-term stability, and integration of carbon nanomaterials into practical water splitting devices. Overall, carbon nanomaterials show great potential for advancing the field of water splitting and enabling the realization of efficient and sustainable hydrogen production.

Experimental investigation on the electrical and hydrogen-production performance of a novel PEM electrolyzer driven by CdTe PV with a tracking system

Addressing the challenges of intermittent and variable energy supply, solar hydrogen production via electrolysis has garnered significant attention due to its unique advantages, emerging as a hot topic in the scientific research domain. However, the application of this technology is currently mainly related to the non-tracking system, which undergoes a rapid change in solar irradiation during the day. To expand the matching relationship of solar irradiation, PV characteristics, and electrolyzer, this paper proposes the development of a Proton Exchange Membrane (PEM) electrolyzer driven by Cadmium Telluride (CdTe) photovoltaic (PV) modules with a tracking system for hydrogen production. An experimental platform was set up in Chengdu and the performance tests were carried out for different operating modes during summer. The experimental results demonstrate that the average electrical and hydrogen production efficiencies of the system are 13.11% and 7.88%, respectively, on a sunny day, with a total of 566.7 L of hydrogen produced within 7 h of operation. Furthermore, the solar irradiation received by the tracking surface of the system is significantly enhanced by 10.29% in comparison to the horizontal surface. On a cloudy day with an electrolyzer inlet water temperature of 45 °C, the system has the potential to achieve a hydrogen production efficiency of 11.15 %. At a constant current density of 1.0 A/cm2, the efficiency of the electrolysis process increased by 2.07% and 1.25% for each 10 °C increase in the temperature of the electrolyzer, having an inlet temperature of 35 °C. This study offers a novel approach for a PV-PEM system with a higher hydrogen production efficiency while also establishing a robust foundation for technology optimization and broader implementation.

Trinuclear iron-oxo cocatalyst regulating new electron transfer pathway in Pt loaded bismuth oxychloride for efficient photocatalytic hydrogen production

BiOCl, a traditional p-type semiconductor, finds extensive application in photocatalytic oxidation and degradation, whereas it is less common in photocatalytic water splitting and hydrogen production. Here, the photocatalytic hydrogen production performance of black BiOCl has been examined by the introduction of noble metal platinum and cocatalyst trinuclear iron-oxo cluster. During the 5-h photocatalytic process, the established system significantly augments the hydrogen production efficiency of black BiOCl by an estimated factor of 8.53. Under illumination, trinuclear iron-oxo clusters provide electron recombination with holes in the valence band of the catalyst, thereby increasing the utilization of photogenerated electrons. Additionally, since the specific energy level structure has a significant impact on the cocatalyst function, trinuclear iron-oxo clusters can be suitable in a variety of photocatalytic systems. This new endeavor might present creative design approaches and low-cost cocatalyst alternatives for the photocatalytic hydrogen evolution from the water splitting of conventional p-type semiconductor materials.

Boosted photothermal-assisted photocatalytic H2 production by dual heat source-based S-scheme heterojunction

With advances in catalytic research, improvement of catalytic efficiency by using photothermal synergies to strengthen the reaction mechanisms has been focused. In this work, a novel photothermal-assisted photocatalytic H2 production system was constructed by loading Co3O4 nanoparticles on surface of black carbon nitride (BCN) nanosheets, served as the dual thermal source to enhance photothermal effect for synergistically assisting in photocatalytic H2 evolution with optimal H2 production rate reached 3.7 mmol g−1 h−1, significantly higher than that of pure carbon nitride (CN) and BCN. Moreover, the S-scheme heterojunction is also formed between Co3O4 and BCN, leading to the optimization of the charge transfer path, which further promotes the improvement of photothermal-assisted photocatalytic H2 production activity. This study provides the design idea of coupling the multi-heat source effect with the heterojunction electron transport for constructing an efficient photothermal-assisted hydrogen production system.

Enhancing Photocatalytic Hydrogen Production Efficiency with Carbon Fibers: A Mini Review

Enhancing Photocatalytic Hydrogen Production Efficiency with Carbon Fibers: A Mini Review

Design and Optimization of a Chemical Looping Hydrogen Production System Using Steam Reforming for Petrochemical Plants.

Industrial pollution is a significant environmental concern, and researchers are seeking solutions to minimize its impact. Chemical looping combustion is an efficient technique to decrease CO2 emissions. This study delves into its application within petrochemical plants for hydrogen production. In addition to its high efficiency in hydrogen production, this method yields pure CO2 and nitrogen. The design features four reactors utilizing iron and nickel metals as oxygen carriers. A model in Aspen Plus was developed to simulate this design and evaluate its performance. Aspen Plus uses RGIBBS submodel which works based on minimization of the Gibbs free energy. The research findings indicate that this design significantly boosted the hydrogen production rate from 3380 kmol/h in conventional steam reforming reactors and 4258 kmol/h in the three-reactor chemical looping combustion setup to 4408 kmol/h. Lowering the temperatures of the iron and nickel fuel reactors, as well as the iron steam reactor, reducing the airflow rate, and increasing the pressure of the iron steam reactor all led to increased hydrogen production. Conversely, changing the pressure of the nickel fuel reactor had minimal impact. The inlet steam flow rate exhibited a nonlinear effect, initially increasing and then decreasing the hydrogen production rate.

High Performance of Mn2O3 Electrodes for Hydrogen Evolution Using Natural Bischofite Salt from Atacama Desert: A Novel Application for Solar Saline Water Splitting.

Solar saline water splitting is a promising approach to sustainable hydrogen production, harnessing abundant solar energy and the availability of brine resources, especially in the Atacama Desert. Bischofite salt (MgCl2·6H2O) has garnered significant attention due to its wide range of industrial applications. Efficient hydrogen production in arid or hyper arid locations using bischofite solutions is a novel and revolutionary idea. This work studied the electrochemical performance of Mn2O3 electrodes using a superposition model based on mixed potential theory and evaluated the superficial performance of this electrode in contact with a 0.5 M bischofite salt solution focusing on the hydrogen evolution reaction (HER) and oxygen reduction reaction (ORR) that occur during saline water splitting. The application of the non-linear superposition model provides valuable electrochemical kinetic parameters that complement the understanding of Mn2O3, this being one of the novelties of this work.

New hybrid system of PV/T, solar collectors, PEM electrolyzer, and HDH for hydrogen and freshwater production: Seasonal performance investigation

A new hybrid energy system of PV/T, flat plate collector, PEM electrolyzer, and humidification-dehumidification desalination is introduced here. A comprehensive mathematical model for the system seasonal performance is constructed and solved numerically using MATLAB software. A year-round comparison between the traditional PV/T performance and its concentrated counterpart indicates that the latter performs better compared to power, hydrogen, and freshwater production and system overall efficiency. The maximum monthly achieved PV/T efficiency, electrolyzer efficiency, desalination system Gain Output Ratio, and overall system efficiency are 52 %, 62 %, 4.8 %, and 44 %, respectively at a concentration ratio of 4 and maximum allowable PV temperature. The system produces 82,200 kWh of energy annually and provides 77,700 kWh and 1500 kWh to the electrolyzer and the electric heater, respectively. Moreover, the system produces an annual freshwater production of about 52,700 kg, out of which approximately 10,000 kg are consumed in the electrolysis process, and an annual hydrogen production of approximately 1120 kg.

Synthesis of concave Au NRs-Pt-CdS plasmonic photocatalyst with efficient hydrogen production rate

Light-driven water photolysis for hydrogen (H2) generation has been proven to be exceptionally efficient in the field of energy transformation. Nevertheless, the practical applications of many single-component semiconductors still suffer from a relatively low energy conversion efficiency. In this work, concave gold nanorods (Au NRs) with three plasmon resonance modes were synthesized using a one-step method in an aqueous solution. Pt nanoparticles and CdS nanocrystals were rational grown onto Au NRs to design the plasmonic photocatalysts with specific morphology and structure characteristic. Photocatalytic test indicated that concave Au NRs-Pt-CdS hetero-nanostructure possess efficient H2 production rate under visible and near-infrared regions. These findings offer a blueprint for creating a novel group of hetero-nanostructures that combine faceted noble metal nanoparticles with semiconductor materials, demonstrating promise for applications across fields such as photocatalysis and energy storage.