Effect Of Temperature Research Articles

The effect of temperature and sand substrate in tanks on the growth and survival of the warty sea cucumber Neostichopus grammatus

ABSTRACT Water temperature and the presence of sand substrate are considered critical environmental factors affecting the growth of cultured sea cucumbers. This study investigated the effects of water temperatures and the presence or absence of sand substrate in tanks on the growth of N. grammatus fed an equal ration of abalone waste for eight weeks. Sea cucumbers with a mean weight of 8.34 g were used for the study. The treatments used in the study were Ambient water temperature + sand (A + S), Ambient water temperature without sand (A-S), Cold water temperature + sand (C + S), and Cold-water temperature without sand (C–S). The cold/constant water temperature was 16°C and was representative of winter conditions while the ambient/fluctuating water temperature fluctuated between 16.4 and 18.7 °C and was representative of spring conditions. At the end of the study, the sea cucumbers in A + S and C + S treatment groups exhibited an overall weight increase of 21.08% and 6.18%, respectively. The sea cucumbers reared in ambient water temperature exhibited significantly higher mean weight than those reared in cold water (F 1, 66 = 5.69; p = 0.02), and sea cucumbers reared with sand substrate had significantly higher mean weight compared to those without sand substrate (F 1,66 = 19.06; p = <0.001). This study has shown that growth rates of N. grammatus in tanks were higher in ambient temperatures and that stress was reduced in the presence of sand, a habitat that mimics its natural environment. This implies that sand substrate may be necessary for the farming of N. grammatus.

Simulation model of carbon capture with MEA and the effect of temperature and duty on efficiency

Humans continue to rely on fossil fuels to generate electricity. In other words, fossil fuels are the world's largest energy producers. Fossil fuels produce significant carbon dioxide, mostly in areas where humans live. Although the share of carbon dioxide produced in big cities is minimal compared to the carbon dioxide production of volcanoes, the production of carbon dioxide in big cities has destructive effects. Process Simulator is utilized to evaluate the effectiveness of their simulation model by subjecting it to various experimental conditions, including liquid loading, temperature, and CO2 absorption (PPS). Comparing empirical and simulated mass transfer coefficients distinguishes this study from others. This procedure consists of two steps: Carbon dioxide (CO2) absorption in a solvent produces highly concentrated CO2 gas following solvent regeneration. A chemical adsorption process's scalability depends on accurate simulation models, typically validated using data from a pilot plant. With the aid of this study, a simulation model of a desorption column is constructed with ASPEN PLUS and 42% MEA validated. In addition, the effect of the weight percentage of 20-42 MEA in the inlet stream on the efficiency is investigated, and the influence of the MEA inlet temperature on system efficiency is examined. Then, the recommended temperature is confirmed based on the MEA's heat tolerance capacity of 303 Kelvin.

Hydrogen Adsorption on Type-5 Penta-MgN8 Sheet, Nanotube, and 3D Porous Structure.

Motivated by the recent report on penta-MgN8 sheet [Mater. Today Phys. 2023, 38, 101259] that is the first realization of type-5 pentagonal 2D tessellation with exposed regularly distributed Mg ions, we carried out density functional theory studies on the interactions of H2 molecules with 1D penta-nanotube, 2D penta-sheet, and 3D porous structures based on penta-MgN8. We found that when the penta-MgN8 sheet is assembled to a 3D porous structure or curved to a nanotube, the bandgap increases from 1.18 to 1.35 and 1.88 eV, and the resulting derivatives are stable dynamically. When H2 molecules are introduced, the nanotube behaves best in adsorption, where each Mg ion can adsorb three H2 molecules: two on the outer surface and one on the inner surface. The curved geometry of the nanotube makes the Mg ion on the outer surface more exposed as compared with the situations of the 2D sheet and 3D porous structure, resulting in stronger adsorptions to H2. The gravimetric capacity (volumetric capacity) is 4.25 wt % (63 g/L) and 4.25 wt % (65 g/L) for the studied penta-sheet and penta-nanotube, and the corresponding desorption temperature is 115 and 162 K at 1 atm pressure, respectively, while for the 3D porous structure, the adsorption performance is poor due to the limited space and the less curvature, leading to strong steric hindrance and less exposed configuration for Mg ions. Moreover, the effects of temperature and pressure on adsorption are also discussed.

Surface Nanostructures Promote Droplet Splash on Hot Substrates.

Splash, one of the most visually apparent droplet dynamics, can manifest on any surface above a certain impact velocity, regardless of surface wettability. Previous studies demonstrate that elevating the substrate temperature can suppress droplet splash, which is unfavorable for many practical applications, such as spray cooling and combustion. Here, we report that the suppression effect of substrate temperature on splash is nullified by utilizing surfaces with nanostructures. By manipulating air evacuation time through surface nanostructures, we have identified a pathway for precise control over the splash threshold and the ability to tailor the dependence of the splash onset on surface temperature. We further propose a theoretical criterion to determine different splash regimes by considering the competition between air evacuation and the development of flow instabilities. Our findings underscore the crucial role of nanostructures in splash dynamics, offering valuable insights for the control of splash in various industrial scenarios.

Performance analysis of dual material control gate cavity on source electrically doped TFET biosensor for biomedical applications

The fabrication complexity, low sensitivity, detection speed, and costs associated with nanoscale devices have been significant concerns in the development of label-free biosensors. To address these issues, we report a novel dual material control gate cavity on source electrically doped tunnel field-effect transistor (DM-CG-CS-ED-TFET) for label-free biosensors. In this regard, the n+ drain and p+ source regions within the proposed device are induced by applying polarity gate (PG) bias voltages of PG-1 = +1.2 V and PG-2 = −1.2 V, respectively, across the respective polarity gate electrodes. This approach not only overcomes doping control issues but also avoids thermal budget constraints and minimizes fabrication complexity when compared to conventional TFET. For biomolecule sensing in the device, a nanogap cavity is created within the gate dielectric by selectively etching a portion of the polarity gate dielectric layer towards the source side. The performance of the proposed biosensor device is evaluated based on the variations in carrier concentration profile, energy band diagram, electric field, transfer (IDS - VGS) characteristics, drain current (IDS) sensitivity, ON-state current (ION) sensitivity, switching ratio (ION/IOFF) and subthreshold swing (SS) sensitivity. The sensitivity of the device is also investigated based on nano-cavity dimensions, practical challenges such as various filling factors, and the step profile generated from the steric hindrance. Moreover, the effect of temperature on sensitivity has also been investigated. For this, various biomolecules including Streptavidin (k = 2.1), APTES (k = 3.57), ferrocytochrome c (k = 4.7), keratin (k = 8) and Gelatin (k = 12), have been investigated for their performance using Silvaco ATLAS device simulator. The simulation results demonstrate that the proposed biosensor is a viable option for biosensing applications in biomedical engineering.

Effects of temperature and nanoparticle mixing ratio on the thermophysical properties of GNP–Fe2O3 hybrid nanofluids: an experimental study with RSM and ANN modeling

Effects of temperature and nanoparticle mixing ratio on the thermophysical properties of GNP–Fe2O3 hybrid nanofluids: an experimental study with RSM and ANN modeling

Assessment of biometrics and stress indicators of the adult Village Weaver birds (Ploceus cucullatus) during breeding and post-breeding seasons in Jos, Nigeria

In this era of climate change, some biological conservationists' concerns are based on seasonal studies that highlight how wild birds' physiological fitness are interconnected with the immediate environment to avoid population decline. We investigated how seasonal biometrics correlated to stress parameters of the adult Village Weavers (Ploceus cucullatus) during breeding and post-breeding seasons of the Weaver birds in Amurum Forest Reserve. Specifically, we explored the following objectives: (i) the seasonal number of birds captured; (ii) whether seasonal baseline corticosterone (CORT), packed cell volume (PCV), and heterophil to lymphocytes ratio (H:L) were sex-dependent; (iii) whether H:L ratio varied with baseline (CORT); (iv) whether phenotypic condition (post-breeding moult) and brood patch varied with baseline (CORT) and H:L ratio; and (v) how body biometrics co-varied birds’ seasonal baseline (CORT), (PCV) and (H:L) ratio. Trapping of birds (May–November) coincided with breeding and post-breeding seasons. The birds (n = 53 males, 39 females) were ringed, morphologically assessed (body mass, wing length, moult, brood patch) and blood collected from their brachial vein was used to assess CORT, PCV and H:L ratio. Although our results indicated more male birds trapped during breeding, the multiple analyses of variance (MANOVA) indicated that the seasonal temperature of the trapping sites correlated (P < 0.05) significantly to baseline (CORT). The general linear mixed model analyses (GLMMs) indicated that the baseline (CORT) also correlated significantly to H:L ratio of the male and female birds. However, PCV correlated significantly to body size of the birds (wing length) and not body mass. Haematological parameters such as the baseline CORT and the H:L ratio as indicators of stress in wild birds. Hence, there is the possibility that the Village Weaver birds suffered from seasonally induced stress under the constrained effect of environmental temperature. Hence, future studies should investigate whether the effect observed is also attributable to other passerine species.

Effect of Storage Temperature and Containers on Date Palm (Phoenix dactylifera L.) Pollen Viability and Post-storage Pollination

Effect of Storage Temperature and Containers on Date Palm (Phoenix dactylifera L.) Pollen Viability and Post-storage Pollination

The Effect of Different Temperatures on the Viability and Senescence of Plum Ovules (Prunus domestica L.)

The Effect of Different Temperatures on the Viability and Senescence of Plum Ovules (Prunus domestica L.)

Thermal enhancement of PEM fuel cell cooling with novel configurations of Tesla valve and hybrid nanofluids: A numerical study

The operating temperature and thermal distribution play a significant role in the appropriate performance of the proton exchange membrane fuel cell (PEMFC). A suitable cell cooling method can guarantee uniform temperature distribution and preservation of membrane water content under harsh conditions in a PEMFC. The compact structure of PEM fuel cells and the size of the cooling system impose a great challenge to achieve a proper design of cooling plate. In this numerical study, four designs of the multi-stage Tesla valve with straight and reverse configuration are proposed to be employed as a cooling channel in which three different hybrid nanofluids such as TiO2–Cu, Al2O3–CuO, and Ag–MgO dispersed in water and Ethylene glycol flow inside the channels. A validated numerical model is developed using a commercial computational fluid dynamics (CFD) code to investigate the effect of inlet temperatures and mass flow rates of cooling fluid and volume fraction of nanoparticles on heat transfer coefficient, pressure drop, index of uniform temperature (IUT), and performance evaluation criteria (PEC). The results demonstrated that the reverse configuration of the Tesla valve (CASE E) experienced outstanding uniform thermal distribution while the heat transfer coefficient increased by 15% in this case compared to the straight-line cooling channel. The Ag–MgO hybrid nanoparticles showed better thermal performance than the two other nanoparticles with a 4% reduction in temperature difference in the cooling plate.

Effects of temperature and diet on larval development of the endangered ground beetle Pterostichus isumiensis (Coleoptera, Carabidae)

Effects of temperature and diet on larval development of the endangered ground beetle Pterostichus isumiensis (Coleoptera, Carabidae)

The egg-counter: a novel microfluidic platform for characterization of Caenorhabditis elegans egg-laying.

Reproduction is a fundamental process that shapes the demography of every living organism yet is often difficult to assess with high precision in animals that produce large numbers of offspring. Here, we present a novel microfluidic research platform for studying Caenorhabditis elegans' egg-laying. The platform provides higher throughput than traditional solid-media behavioral assays while providing a very high degree of temporal resolution. Additionally, the environmental control enabled by microfluidic animal husbandry allows for experimental perturbations difficult to achieve with solid-media assays. We demonstrate the platform's utility by characterizing C. elegans egg-laying behavior at two commonly used temperatures, 15 and 20 °C. As expected, we observed a delayed onset of egg-laying at 15 °C degrees, consistent with published temperature effects on development rate. Additionally, as seen in solid media studies, egg laying output was higher under the canonical 20 °C conditions. While we validated the Egg-Counter with a study of temperature effects in wild-type animals, the platform is highly adaptable to any nematode egg-laying research where throughput or environmental control needs to be maximized without sacrificing temporal resolution.

Assessing salinity hazards in coastal aquifers: implications of temperature boundary conditions on aquifer–ocean interaction

Investigating the repercussions of climate change and irrigation timing on groundwater contamination necessitates thorough examination of the fluctuations in seawater and groundwater recharge temperature. This study introduces an innovative numerical approach to analyze groundwater salinity and temperature dynamics across three distinct scenarios using the SEAWAT code based on Henry's problem. The first scenario delves into the impact of seawater temperature, the second focuses on the consequences of aquifer freshwater recharge temperature, and the third amalgamates the effects of both scenarios. Remarkably, the study reveals that saltwater intrusion (SWI) experiences a decline attributable to the aquifer's heightened seawater temperature and the diminished inland freshwater temperature. Furthermore, combining these two scenarios has a more pronounced effect on aquifer pollution; the temperature-induced changes in SWI for this third scanrio reach + 8.10%, + 12.70%, + 16.20%, + 24.90%, + 28.30%, and + 31.80% compared to the case without considering the temperature effect. Notably, our results propose a potential strategy to mitigate SWI by introducing cold freshwater recharge into aquifers, such as irrigation at night time when water temperature is low. This innovative approach underscores the interconnectedness of various environmental factors. It provides a practical avenue for proactive intervention in safeguarding groundwater quality against the adverse impacts of climate change and irrigation practices.

Manufacturing studies of a polymeric/composite heart valve prosthesis

AbstractCurrent transcathether heart valves rely on metal mesh stents, resulting in discontinuous stent‐leaflet interfaces that introduce stress concentrations, reducing valve lifetime. This work aims to investigate non‐conventional methods to create a fully polymeric transcatheter heart valve, exhibiting a quasi‐continuous interface with hemocompatible leaflets with high durability potential. Polyetheretherketone (PEEK) is of particular interest as a cardiovascular material due to hemocompatibility and mechanical resilience, highly relevant for catheter delivered valves. For increased reproducibility and design freedom, an autoclave process was used to manufacture thin‐ply PEEK composite stents. We demonstrated that a suitable membrane material during manufacturing is essential to evenly distribute pressure around the stent. Meanwhile, a modified vacuum forming process was used to simultaneously form and attach PEEK leaflets to the stent using a heated mold. This simple and robust method enables rapid manufacturing of an integral PEEK‐based valve design, resulting in improved stent‐leaflet bonding, demonstrating an alternative to conventional dip‐coating. The customized vacuum forming causes a controlled annealing effect in semicrystalline materials such as PEEK. Processing PEEK leaflets at higher mold temperatures results in higher crystallinity, elastic modulus, and bond strength. These processes enable greater design flexibility and promote composite materials for use in heart valve devices.Highlights Developed manufacturing processes for PEEK‐based heart valve implants. Proof of concept for thermoforming of semi‐crystalline PEEK leaflets. Demonstrated effect of processing temperature on valve mechanical properties. Autoclave processing and vacuum forming enable new heart valve designs.

Effects of water temperature on growth of invasive Myriophyllum aquaticum species

This study sought to investigate the invasive mechanism of Myriophyllum aquaticum by subjecting it to simulation experiments in varying water temperatures ranging from 0 °C to 30 °C. The results showed that water temperature considerably affected both the growth and reproduction of M. aquaticum. The optimal temperature range for the growth of M. aquaticum was 25‒30 °C. Although the growth of M. aquaticum was inhibited at temperatures between 0‒5 °C, this did not result in mortality. The stem nodes, branches, and diameter reached maximum values over a temperature range of 20‒25 °C. High-temperature stress at 30 °C led to a gradual decrease or disappearance of branches. Compared to the 0 °C, 5 °C, and 30 °C treatment groups, a temperature of 20 °C led to biomass accumulation and significantly higher values. M. aquaticum’s physiological activities were affected by temperature. Except for 10 °C and 15 °C, the catalase activity varied among different water temperatures. M. aquaticum catalase activity was maximal at 5 °C and minimal at 25 °C. Conversely, the synthesis of photosynthetic pigments was highest at 10 °C and 15 °C. The plant’s optimal temperature for growth was between 20 °C and 25 °C. When the temperature was &amp;lt;10 °C, M. aquaticum adapted to the water temperature’s potential damage. This plant has a notable ability to tolerate various temperatures.

The biophysics of water in cell biology: perspectives on a keystone for both marine sciences and cancer research

The biophysics of water, has been debated over more than a century. Although its importance is still underestimated, significant breakthroughs occurred in recent years. The influence of protein condensation on water availability control was documented, new findings on water-transport proteins emerged, and the way water molecules rearrange to minimize free energy at interfaces was deciphered, influencing membrane thermodynamics. The state of knowledge continued to progress in the field of deep-sea marine biology, highlighting unknown effects of high hydrostatic pressure and/or temperature on interactions between proteins and ligands in extreme environments, and membrane structure adaptations. The role of osmolytes in protein stability control under stress is also discussed here in relation to fish egg hydration/buoyancy. The complexity of water movements within the cell is updated, all these findings leading to a better view of their impact on many cellular processes. The way water flow and osmotic gradients generated by ion transport work together to produce the driving force behind cell migration is also relevant to both marine biology and cancer research. Additional common points concern water dynamic changes during the neoplastic transformation of cells and tissues, or embryo development. This could improve imaging techniques, early cancer diagnosis, and understanding of the molecular and physiological basis of buoyancy for many marine species.

Joining SiC ceramics with ZrSi2–SiC filler at low temperatures

AbstractZrSi2–SiC powder was employed as the joining material to join SiC ceramics in this study. The effects of SiC particle (SiCp) content and joining temperature on the phase composition, microstructure, and shear strength of SiC joints were studied and reported for the first time. Research results showed that introduction of SiCp into the interlayer improved the mechanical performance of the joint. When 10 wt.% SiCp was introduced into the interlayer, the optimal shear strength measured of the joint was 116.7 ± 6.7 MPa under the joining condition of 1500°C for 10 min. With the joining temperature increased, the shear strength of the joint gradually increases. When the joint was performed at 1600°C for 10 min, an ultra‐high temperature phase of ZrC was detected in the interlayer, and the shear strength of the joint was 168.1 ± 12.6 MPa. The SiC joint with high mechanical strength might have the potential for application in the field of nuclear industry.

Investigation of the effect of salty water temperature of basins on freshwater production rate in hemispherical solar water desalination still with two basins

Investigation of the effect of salty water temperature of basins on freshwater production rate in hemispherical solar water desalination still with two basins

Optical Study on the Effects of Wall and Intake Temperatures on Ammonia Combustion and Emissions

Optical Study on the Effects of Wall and Intake Temperatures on Ammonia Combustion and Emissions

Combined effects of high temperature and lithology on the tensile mechanical damage and fracture surface morphology of reservoir rocks

Combined effects of high temperature and lithology on the tensile mechanical damage and fracture surface morphology of reservoir rocks