Shading Effect Research Articles

Manure temperature prediction for slurry storage in Sweden: Model validation including effects of shading, snow cover and mixing

Measuring and modelling manure temperatures are crucial for estimating greenhouse gas emissions from liquid manure storage. The manure temperature was recorded at various depths in two swine slurry storage tanks situated in Vallentuna (VA) and Örsundsbro (OR) in Sweden. These data were used to assess the effectiveness of a revised mechanistic model for estimating manure temperatures, which incorporates the effects of wall shading, snow cover, and manure input mixing. The average manure temperatures were higher than air temperatures in the summer and fall. This indicated that using air temperature would result in an underestimation of methane emissions when applying the 2019 IPCC Refinement methodology. The revised model estimated manure temperatures for spring, summer, fall, and winter as 4.8, 16.1, 7.8, and 2.6 °C at the VA tank and 11.6, 17.1, 9.5, and 3.6 °C at the OR tank. The root mean square errors between daily simulated and observed temperatures in the summer decreased in both tanks due to incorporating shadow effect into the revised model. Fall estimates did not improve, possibly because of uncertainties from slurry removal and higher precipitation inputs. Sensitivity analysis indicated that solar radiative heat input was reduced with higher tank walls and smaller tank diameters when applying the revised model. Wall shading may influence manure temperatures in tanks with small diameters at high-latitude locations. This study offers insights into understanding the relationship between manure temperatures and its thermal balance influenced by latitude, storage design, snow cover and mixing, and its implications for accurately estimating methane emissions.

Effects of graphene oxide on the diatom Nitzschia palea are associated with carbon cycling disturbance

Graphene based nanomaterials (GBMs) have been drawing the attention of the scientific communities these past years. As their market is increasing every year, their potential environmental and health risk are to be assessed. As microbial communities represent the basis of every ecosystem, it is essential to evaluate the risks of GBMs on these communities. The effects of GBMs on bacteria has been widely studied, while the effects on phototrophic species are less represented. In this study, the diatom Nitzschia palea was exposed to graphene oxide (GO) and reduced graphene oxide (rGO), at 0.1, 1 and 10 mg L−1. rGO had no effect on the diatom while GO induced an increase in growth, indicating the importance of the oxidation rate in the observed effect. Further results showed that shading effect of GO was countered by increased chlorophyll contents and by the accumulation of GO into the biofilm. This “sticking” mechanism increased the proximity between the biofilm and the GO, which might favour interactions between GO and the biofilm. These interactions led to the increase of defects and the reduction of GO. In addition, increased heterotrophic activity was suggested. To our knowledge, no diatom before Nitzschia palea has been shown to enhance its growth in presence of a GBM, but also capable to modify it. These results demonstrate the potential of GBMs, and in particular those with higher oxidation rates, to disrupt the contribution of the diatom Nitzschia palea to carbon cycling, which could have broader consequences at ecosystem scale.

Integrating daylight with solar thermal modeling: A dynamic calculation method for complex fenestration systems

This study developed a mathematical model named the DL-E model, which links annual dynamic daylight and solar heat gain calculations for Complex Fenestration Systems (CFSs). The DL-E model utilizes the Klems Bidirectional Scattering Distribution Function (BSDF) to characterize CFSs and can consider the shading effect of obstacles, as well as solar radiation reflected from obstacles and the ground. The DL-E model uses the Perez all-weather model to calculate transmitted solar radiation contributed by diffuse solar radiation, rather than the simplified sky model used in EnergyPlus. Results calculated with the DL-E were compared with those computed with EnergyPlus, and it was found that for most of the results, the both methods yielded closely aligned outcomes. However, for the diffuse transmitted solar radiations, reflected solar radiation from the ground in the case with a vertical obstacle, and the reflected solar radiations from the obstacle, the values calculated with DL-E showed significant differences compared to those calculated with EnergyPlus due to the use of the simplified sky model in EnergyPlus. In contrast, the values calculated with the DL-E model which used the Perez all weather sky model displayed very small difference compared to those calculated with Radiance, which means the values derived with EnergyPlus may produce significant errors. Additionally, a new workflow has been developed for calculating building load and energy for CFSs to avoid the manual conversion of the BSDF files.

Gene expression regulation of the effect of shading on chlorophyll content in Fuding White Tea (Camellia sinensis L.).

Shading is an important practical method to improve the quality of green tea. Previous research of our group found that because the biosynthesis and distribution of theanine in tea plants were affected by down regulation of gene encoding amino acid permeases, theanine content in tea leaves which grown under shading condition was significantly higher than those under natural light. In this study, our group analyzed the changes of tea leaf area, free amino acid content and photosynthetic parameters under natural light and shading conditions, to ensure that moderate shading did not reduce but improve the quality of tea. Transcriptome sequencing and Kyoto Encyclopedia of Genes and Genomes (KEGG) enrichment analysis were conducted to reveal the expression levels of genes related to chlorophyll content and chlorophyll a/b ratio under natural light and shading conditions. Experimental results revealed the presence of the following differentially expressed genes (DEGs) in the porphyrin and chlorophyll metabolism pathway of tea under natural light and shading conditions: the up regulation of CPOX expression may lead to an increase in the accumulation of raw materials of chlorophyll synthesis, while the down regulation of SGR expression may lead to a decrease in chlorophyll degradation. The combined effect of these two genes may lead to an increase in the total chlorophyll content of tea. The down regulation of NOL expression may lead to the obstruction of chlorophyll b transform to chlorophyll a, that is, the decrease of the chlorophyll a/b ratio. This study investigated the molecular mechanism of chlorophyll content and component alteration in Fuding white tea under natural light and shading conditions, and elucidated the effects of different light intensities on the porphyrin and chlorophyll metabolism pathway of tea. Thus provided deep understanding of chlorophyll regulation under shading condition in tea cultivation, which could contribute to high-quality matcha production.

JAVA BASED FIRST-PERSON SHOOTER (FPS) GAME WITH REMASTERED GRAPHICS

Our project aims to accurately examine an old game's assembly source, comprehend its usefulness, and convert it into efficient Java code. Using Java's object-oriented characteristics, the emphasis is on restructuring and organizing code to make it more maintainable and comprehensible. The successful conversion of this game to Java demonstrates how knowledge of low-level assembly programming can supplement skill in high-level Java programming, resulting in a smooth integration of traditional gameplay with current technology. This integration not only heightens perceptions but also makes the game more accessible to modern audiences, providing an immersive gaming experience that combines the game's original character with contemporary software development standards. The enhanced graphics will also include upgrading game elements including textures, models, and special effects. The enhanced graphics will include improved game assets like textures, models, and special effects, as well as advanced lighting and shading effects. In addition, the game's user interface will be updated to increase use and appearance. The project's goal is to demonstrate the integration of classic FPS gameplay with contemporary graphics technology, providing players with an enhanced gaming experience that combines the recollections of old FPS games with the visual quality of modern gaming. Key Words: - Java programming, game development , FPS game, graphics.

Effects of microclimate on disease prevalence across an urbanization gradient.

Increased temperatures associated with urbanization (the "urban heat island" effect) have been shown to impact a wide range of traits across diverse taxa. At the same time, climatic conditions vary at fine spatial scales within habitats due to factors including shade from shrubs, trees, and built structures. Patches of shade may function as microclimate refugia that allow species to occur in habitats where high temperatures and/or exposure to ultraviolet radiation would otherwise be prohibitive. However, the importance of shaded microhabitats for interactions between species across urbanized landscapes remains poorly understood. Weedy plants and their foliar pathogens are a tractable system for studying how multiple scales of climatic variation influence infection prevalence. Powdery mildew pathogens are particularly well suited to this work, as these fungi can be visibly diagnosed on leaf surfaces. We studied the effects of shaded microclimates on rates of powdery mildew infection on Plantago host species in (1) "pandemic pivot" surveys in which undergraduate students recorded shade and infection status of thousands of plants along road verges in urban and suburban residential neighborhoods, (2) monthly surveys of plant populations in 22 parks along an urbanization gradient, and (3) a manipulative field experiment directly testing the effects of shade on the growth and transmission of powdery mildew. Together, our field survey results show strong positive effects of shade on mildew infection in wild Plantago populations across urban, suburban, and rural habitats. Our experiment suggests that this relationship is causal, where microclimate conditions associated with shade promote pathogen growth. Overall, infection prevalence increased with urbanization despite a negative association between urbanization and tree cover at the landscape scale. These findings highlight the importance of taking microclimate heterogeneity into account when establishing links between macroclimate or land use context and prevalence of disease.

Unveiling the molecular mechanisms of size-dependent effect of polystyrene micro/nano-plastics on Chlamydomonas reinhardtii through proteomic profiling

Microplastics have become a prevalent environmental pollutant due to widespread release and production. Algae, as primary producers, play a crucial role in maintaining the ecological balance of freshwater environments. Despite reports on the inhibition of microalgae by microplastics, the size-dependent effects on microalgae and associated molecular mechanism remain poorly understood. This study investigates the impacts of three polystyrene micro/nano-plastics (PS-MNPs) with different sizes (100 nm, 350 nm, and 6 μm) and concentrations (25–200 mg/L) on Chlamydomonas reinhardtii (C. reinhardtii) throughout its growth period. Results reveal size- and concentration-dependent growth inhibition and induction of oxidative stress by PS-MNPs, with microalgae exhibiting increased vulnerability to smaller-sized and higher-concentration PS-MNPs. Proteomics analysis elucidates the size-dependent suppression of proteins involved in the photosynthesis process by PS-MNPs. Photosynthetic activity assays demonstrate that smaller PS-MNPs more significantly reduce chlorophyll content and the maximal photochemical efficiency of photosystem II. Finally, electron microscope and Western blot assays collectively confirm the size effect of PS-MNPs on microalgae growth is attributable to suppressed protein expression rather than shading effects. This study contributes to advancing our understanding of the intricate interactions between micro/nano-plastics and algae at the molecular level, emphasizing the efficacy of proteomics in dissecting the mechanistic aspects of microplastics-induced biological effects on environmental indicator organisms.

Quantifying Structural Shading and Reflection Effects on Single Axis Tracked Bifacial Photovoltaic System Performance

Structural elements of bifacial photovoltaic (PV) systems, such as module frames, module supports, and torque tubes, affect module rear irradiance profiles through both shading and reflection. Standard bifacial energy yield models represent racking effects as a flat rear irradiance de‐rate factor; however, this neglects 1) the impact of racking reflection, and 2) the variation of racking effects over time. In this work, a differential irradiance approach is presented to quantify the effect of racking shading and reflection on bifacial rear irradiance. Using this method, racking effects on system energy yield, irradiance mismatch losses, and bifacial gain are calculated. This is applied to a single‐axis‐tracked 2‐in‐portrait bifacial PV system in Livermore, California with 74.5% reflective racking using bifacial_radiance ray tracing software. Racking reflection counteracts the irradiance reduction and mismatch losses caused by racking shading. Racking reflection reduces average rear irradiance shading by up to 19.2% per timestamp and 9.1% per year compared to absorptive racking. Racking effects vary diurnally, seasonally, and with respect to albedo. In a single day, the impact of racking on rear irradiance varies up to 14.6%. Applying this method will improve energy yield modeling accuracy of bifacial PV systems.

Seed-Bird co-occurrence networks in cocoa agroforests: Morphological matching analysis reveals shading effects on network organization

Tropical forests are highly vulnerable to ongoing deforestation, which often involves converting land for agricultural use. While tropical agroforests have been promoted as wildlife-friendly systems, limited information is available on the ability of agroforests to provide diverse fruits that attract birds and thus contribute to essential ecological processes, such as seed dispersal. Here, we evaluated the organization of tropical seed-bird co-occurrence networks in cocoa agroforests of the Brazilian Atlantic Forest. Specifically, we investigated the influence of (i) landscape and local predictors in shaping the structure of seed-bird co-occurrence networks; and (ii) species traits in explaining their interactive role in the networks. We constructed matrices of presence-absence interactions based on morphological matching among the beak width of frugivorous bird species and the size of ornithochorous seed species (both native and exotic species), using field data of seed rain and understory bird surveys from 15 cocoa agroforests. We further evaluated both the effects of landscape forest cover and local shading on five network indices and how functional traits of birds and seeds explain their importance to the network. In total, we obtained 467 events of potential plant-bird interactions, which revealed a modular pattern. We also observed that only canopy shading significantly affected network connectance, and seed diameter was a significant predictor in explaining tree species contribution in the network. Therefore, our findings show that cocoa agroforests with greater shading will have greater opportunities for interactions between frugivorous birds and plants. We also observed that plants with small seeds play a more relevant role in the co-occurrence interaction network. Based on findings, we emphasized that cocoa agroforests likely maintain certain mutualistic relationships to ensure ecosystem functionality and demonstrate that co-occurrence networks have great potential for future seed dispersal networks in agricultural ecosystems.

Optimizing restoration duration to maximize CO2 uptake on the Tibetan Plateau

Grasslands cover one-third of the terrestrial area, though half of them have been degraded and primarily due to overgrazing. The Tibetan Plateau (TP) is home to the largest area of alpine grassland on Earth, experiencing a typical degradation-restoration story over the past three decades. With the large-scale implementation and long-term duration of ecological projects aimed at restoring degraded grasslands by fencing across the TP, there is considerable uncertainty regarding the direction and magnitude of changes in the carbon (C) sink function. To address this, we combined ten pairs of systematic field observations at the site scale with literature compilation, aiming to clarify whether restoration still contributes to C uptake and its driving factors. Our results show that after a decade of restoration, living biomass was enhanced by over 80 %, and litter accumulation increased by 3.68 ± 1.25 times across all ecosystem types, although these changes were barely reflected in soil C. Litter caused consistent negative impacts on CO2 uptake across all vegetation types, despite restoration having increased CO2 uptake by half in alpine steppes and alpine meadows. This negative impact was more evident in alpine wetlands, where the quantity of litter was double the living biomass. The thick layer of litter produced a shading effect that further limited the photosynthetic yield of living plants, regulating the restoration-induced CO2 gain or loss. Combining 246 cases across the TP further highlights the need to shorten the duration of restoration to maximize CO2 uptake while also benefitting sustainability, which is deserving of attention from both the scientific community and policy-makers.

Reguladores de crescimento influenciam a altura e a partição de biomassa de plantas de mamona

ABSTRACT Castor (Ricinus communis) is a drought-resistant oilseed crop. This study evaluated five plant growth regulators (PGR) on their capacity to influence stem elongation of castor plants growing under shade and measured side effects on the biomass allocation among leaf, stem, and roots. The experiment had 220 castor plants of the cultivar AKB 02, on a completely randomized design and four replicates. The plants were kept under artificial shade and treated with 11 doses of PGR, applied in the first day after emergence. Eight plants were exposed to full sun radiation without PGR treatment. The plant height was measured daily, and the plants were harvested for weighing the final biomass. The data was subjected to multiple linear regression. The shade promoted stem elongation and reduced biomass accumulation in all compartments. The height growth was restricted by trinexapac-ethyl, mepiquat chloride, and chlormequat chloride. Gibberellin promoted stem elongation in addition to the shade effect. Paclobutrazol did not influence stem elongation, but it favored biomass accumulation and increased the stem density. Gibberellin promoted allocation to stem replacing leaf biomass; trinexapac-ethyl promoted root replacing stem and leaf biomass; mepiquat and chlormequat chloride promoted stem in detriment of leaf biomass. In conclusion, plant growth regulators may be effective to restrict height growth of castor plants, but they can also disturb the biomass allocation among root, stem, and leaves.

Effects of Sun vs Shade and Leaf Age on Leaf Morphology, Herbivory, and Physical Defenses in the Swiss Cheese Plant (Monstera adansonii)

Abstract One important structural defense of plants is calcium oxalate crystals or raphides. In this project, I studied one species in the plant family Araceae, Monstera adansonii, a widely distributed plant in the tropics, that is known to contain raphides. Plants of this species were sampled in sun or shade locations. For each plant, three leaves were sampled, the first fully expanded leaf on a plant (leaf 1) and two more leaves below it, leaf 3 and leaf 5. For each leaf, I measured: leaf area, number of fenestrations (naturally occurring holes in the leaf), amount of herbivory, and density of raphides. I compared these measures on leaves of different ages from sun versus shade plants. Results showed that: 1) older leaves were significantly larger than younger leaves (P < 0.001), but there was no effect of light environment (P = 0.199); 2) density of raphides was not significantly affected by sun (P = 0.147) and density of raphides decreased with leaf age (P = 0.0097); 3) the number of fenestrations was significantly higher in plants in the sun (P = 0.01), but did not differ with leaf age (P = 0.702); 4) herbivory was not affected by sun exposure (P = 0.29) but was marginally significantly affected by raphide density (P = 0.06). There was a significant interaction between raphide density and light exposure on herbivory, in that in the shade there was a negative relationship where herbivory decreased as raphides increased, but in the sun, a positive relationship where herbivory increases as raphides increase (P = 0.04). Lay Summary Deforestation poses significant threats to the fragile ecosystem of tropical rainforests. Costa Rica’s Monteverde Cloud Forest, known for its rich biodiversity, relies on canopy tree cover for habitat protection and the maintenance of ecological balance. Tree loss can have a cascading effect on the ecosystem, which may negatively affect many species. When this balance is disrupted through deforestation, understory plants, such as Monstera adansonii, or the well-known “Swiss cheese” houseplant, are exposed to direct sun and harsh environmental elements. They may be initially ill-equipped to handle these conditions, but plants can physically adapt to their surrounding environment. To understand how plants may adapt to new conditions, I studied physical differences in Monstera adansonii between shaded understory areas and sunny exposed areas, which are created by forest clearing. I examined its physical differences, including the concentration of calcium oxalate crystals within its leaves. Among others, my results showed that the plants in the sun experienced more damage by herbivores than the plants in the shade. Through this study, I have “shed light” on the effects of deforestation and what this plant and many other understory plants may face as the rate of deforestation increases. For the full text, please visit https://scholar.colorado.edu/concern/undergraduate_honors_theses/d791sh621.

Impact of Solar Shading on Façades’ Surface Temperatures under Summer and Winter Conditions by IR Thermography

In warm climates with high levels of solar irradiation, solar shading plays a determinant role on buildings’ envelope performance, both during summer and winter conditions. In this research, an evaluation of the solar shading effect on sunny façades through IR thermography non-destructive testing was performed. Sunny and shaded areas revealed temperature differences of 7.4 °C in summer conditions and up to 1.2 °C in wintertime. Moreover, solar shading was shown to be beneficial not only for decreasing surface temperature in summertime but also for reducing convective air flow in wintertime. In addition, it was found that the prevalence of dense shadows, especially with non-reflective materials in louvres, is favorable. External Thermal Insulation Constructive Systems (ETICS) must be shadowed and the use of clear colors is recommended to reinforce homogeneity in the surface in wintertime and reduce solar absorptance in summertime. Under steady-state calculations, thermal losses can be reduced up to 30% at night in wintertime and up to 50–60% at daytime in summertime because of the shadowing. However, another important finding lied in the confirmation of the performance gap that arises between using air temperature, sol-air temperature and the actual surface temperature data, in such a way that the two former implied high levels of inaccuracy and overestimated the performance of the buildings compared to the actual behavior. Some of the main conclusions can be extrapolated to other circumstances.

Reduced partial shading effect and enhancement of performance metrics using a Fibonacci based algorithm

AbstractPartial shading within arrays diminishes power output, induces hotspots, and compromises module integrity, thereby impacting system performance. The presence of bypass diodes further exacerbates these issues by introducing non‐convexities in power curves, leading to additional power losses. To solve this problem, a new reconfiguration technique named Fibonacci Random Number Generator is proposed in this work which minimizes the effects of shading on the panels. The proposed methodology swiftly reduces current discrepancies between PV array rows by reshuffles the panels in an array to disperse the shade better using a mathematical formula resulting in increased power output and smoother power curves during partial shading events. The effectiveness of the proposed method is measured in terms of GMPP, row current calculations, power loss (PL), mismatch losses (ML), execution ratio (ER), fill factor (FF), and capacity factor (CF) for four distinctive shading conditions. Validation of results in software and hardware platforms showcase the applicability of proposed approach in real‐time environments. Results indicate significant average power improvements of 25.49%, 15.47%, and 9.29% compared to existing popular reconfigurations like Skyscraper, Ken‐Ken, and Chaotic baker map. The proposed method stands out as a potent tool for optimizing PV arrays within real‐world systems grappling with partial shading issues.

Elevational Earth-Sheltered Buildings with Horizontal Overhang Photovoltaic-Integrated Panels—New Energy-Plus Building Concept in the Territory of Serbia

The global scientific community is intensively promoting energy-plus buildings. Following the leading world trends, this paper presents a new energy-plus building concept—elevational earth-sheltered buildings with three different types of horizontal overhang photovoltaic-integrated panels: wooden support columns covered with clay tiles, steel pipes as support columns covered with sheet steel, and concrete support columns with concrete coverage. In this instance, the specific multi-numerical case study building model for the city of Kragujevac (located in central Serbia with favorable climatic conditions) was performed over 7 months (from 1 October to 30 April), taking into account the soil temperature, the effects of solar shading, the performance of the heating system—a ground source heat pump—and the characteristics of the artificial and automatic lighting control system. The simulation results show that the optimal depth of a horizontal overhang (energy-plus status) depends on the occupant’s habits, in addition to meteorological conditions. The presented methodology can be used for any other location, both in Europe and the world.

Shading impact on the electricity generated by a photovoltaic installation using “Solar Shadow-Mask”

Abstract Solar energy is an excellent source of renewable power, but designing photovoltaic (PV) systems can be challenging without proper knowledge of solar radiation. The amount of energy received at the installation site plays a crucial role in determining the number of panels required to meet the electrical demand. For a given electrical demand, higher levels of received energy imply a reduced number of panels required, and vice versa. Hence, having knowledge of this irradiance is of paramount importance in the design and sizing of solar energy systems. The primary objective of this article is to provide an accurate estimation of electricity production in a PV installation when it is affected by shading. To achieve this, we performed calculations of the irradiation (direct and diffuse) received by our installation using the “Hottel” method, which integrates relevant local site parameters for our study. Subsequently, we study the impact of shading by conducting shade mask measurements on our installation. This enables us to obtain an accurate estimation of the irradiance received by the PV panels. The measurements include surveys of the geometry of obstacles and shade measurements taken at various times of the day. Additionally, a practical study of shading effects will be conducted using “close shading masks.” This method was applied to a 1.44 kWp PV installation located at the Faculty of Science and Technology of Settat (Morocco), where the output energy of PV panels was calculated. Finally, the effect of shading on the PV installation was quantified.

Analysing the Effects of Thin Object Shading on PV Sources: A Dual Approach Combining Outdoor and Laboratory Solar Simulator Experimentation

The impact of shading has been a prominent subject of discourse within the realm of photovoltaic (PV) energy harvesting and is recognized as a significant detriment to the system’s overall efficiency. Nevertheless, prevailing investigations, which predominantly focus on the hard shading originating from building structures and vegetation, singularly address the umbra shadow phenomenon while overlooking the complexity of shadow properties and their varying intensities. In this context, this present research aims to analyze the impact of shading caused by thin objects, wherein shadow formation deviates from a singular-intensity umbra to a blend of umbra and penumbra, exhibiting diverse intensities. In the initial experimental approach, outdoor trials produced statistically significant findings, identifying both the distance and thickness of shading objects as primary determinants influencing the impact of thin object shading on the power output of PV systems. Furthermore, the analysis of the results revealed that under the specified parameters and assumptions, when considering a thin object with a thickness-to-distance ratio of 2.3 mm/225 cm, the resulting power loss of 1.65% is statistically insignificant. Remarkably, laboratory investigations unveiled a notable correlation between penumbra and power loss, contrasting with outdoor experimentation results. The findings highlight the distinction between indoor and outdoor methodologies, stemming from discrepancies in shadow formation characteristics, thereby emphasizing the necessity of acknowledging and comprehending these variations.

Effects of narrow-wide row planting patterns on canopy photosynthetic characteristics, bending resistance and yield of soybean in maize‒soybean intercropping systems

With the improvements in mechanization levels, it is difficult for the traditional intercropping planting patterns to meet the needs of mechanization. In the traditional maize‒soybean intercropping, maize has a shading effect on soybean, which leads to a decrease in soybean photosynthetic capacity and stem bend resistance, resulting in severe lodging, which greatly affects soybean yield. In this study, we investigated the effects of three intercropping ratios (four rows of maize and four rows of soybean; four rows of maize and six rows of soybean; six rows of maize and six rows of soybean) and two planting patterns (narrow-wide row planting pattern of 80–50 cm and uniform-ridges planting pattern of 65 cm) on soybean canopy photosynthesis, stem bending resistance, cellulose, hemicellulose, lignin and related enzyme activities. Compared with the uniform-ridge planting pattern, the narrow-wide row planting pattern significantly increased the LAI, PAR, light transmittance and compound yield by 6.06%, 2.49%, 5.68% and 5.95%, respectively. The stem bending resistance and cellulose, hemicellulose, lignin and PAL, TAL and CAD activities were also significantly increased. Compared with those under the uniform-ridge planting pattern, these values increased by 7.74%, 3.04%, 8.42%, 9.76%, 7.39%, 10.54% and 8.73% respectively. Under the three intercropping ratios, the stem bending resistance, cellulose, hemicellulose, lignin content and PAL, TAL, and CAD activities in the M4S6 treatment were significantly greater than those in the M4S4 and M6S6 treatments. Compared with the M4S4 treatment, these variables increased by 12.05%, 11.09%, 21.56%, 11.91%, 18.46%, 16.1%, and 16.84%, respectively, and compared with the M6S6 treatment, they increased by 2.06%, 2.53%, 2.78%, 2.98%, 8.81%, 4.59%, and 4.36%, respectively. The D-M4S6 treatment significantly improved the lodging resistance of soybean and weakened the negative impact of intercropping on soybean yield. Therefore, based on the planting pattern of narrow-wide row maize‒soybean intercropping planting pattern, four rows of maize and six rows of soybean were more effective at improving the lodging resistance of soybean in the semiarid region of western China.

Study of application of bioclimatic architecture strategy at Citraland Residential House in Palu City

Palu City has a fairly hot air temperature, very high intensity of solar radiation, quite high rainfall, and a fairly large wind speed. When reviewing the climatic conditions of Palu City above, the planners in this case the Citraland housing architect team should be able to apply a bioclimatic architecture strategy to be able to respond to the climatic conditions of the city of Palu. Based on this background, it is necessary to conduct a research study on the application of bioclimatic architecture strategies in Citraland's residences. This study uses a rationalistic approach with an exploratory method. Research shows that Citraland Residence has implemented a bioclimatic architectural strategy in several ways, namely the use of shading or shadow effects in the form of roof canopy, eaves, and lattice made of wood, and protective plants, as well as the use of insulating materials such as natural stone affixed to the outer walls. residential home. In addition, the layout of the residence also plays a role in the flow of air circulation to the maximum. Then the strategy of making wind-catching rooms and the use of glass materials on several sides of the building which acts as a place to enter sunlight into the house

Estimation of maximum photovoltaic cover ratios in greenhouses based on global irradiance data

In this study, a method for estimating the maximum PV (photovoltaic) cover ratio for plastic greenhouses based on various years of global horizontal irradiance (GHI) data is presented and illustrated with an exemplary site in southeastern Spain. CAMS (Copernicus Atmosphere Monitoring Service) GHI data from 2005 to 2023 were analyzed to estimate the DLI (daily light integral) inside the greenhouses for various PV coverage ratios with East-West or North-South orientation. The conversion from GHI to photosynthetically active radiation is performed with the usage of a regression model from literature based on satellite and measurement data. The shading effect of the PV cover is estimated with a regression model from literature based on radiation distribution simulations in different greenhouse types. The maximum PV cover ratio was derived for different minimal DLI thresholds, corresponding to different crops. The proposed methodology has been tested for the Almería region in southeastern Spain which is characterized by high solar irradiance and can be applied also to other regions with similar climatic conditions. With a required DLI of at least 12 mol/m2/day, a theoretical maximum PV coverage of about 44% is acceptable even in December at the studied site for East-West orientation, while it reaches up to 100% (June) during the year. Further, the maximum PV cover ratios for a DLI threshold range have been calculated and compared with experimental results for plastic greenhouses from literature. In 87.2% of the case studies analyzed from literature, the proposed method showed an agreement in the estimation of the effect of PV shading ratios on marketable crop yields. The study indicates that significant PV cover ratios are theoretically possible even for light demanding crops considering DLI thresholds only and can help to select a useful PV cover ratio in PV greenhouses.