Effect Of Nanotopography Research Articles

Nanoscale Mechanical Stimulation of Human Mesenchymal Stem Cells

Introduction: Mechanical stimulation of human mesenchymal stem cells has demonstrated changes in many cell behaviours such as adhesion, migration, growth and differentiation through mechanotransductive pathways. These include experiments on effect of nanotopography 1, shear stress, stiffness of extracellular matrix 2, strain, stress and acoustic wave energy 3 on cells. In this research we were looking for mesenchymal stem cell responses to nanoscale mechanical vibrations in Z-axis. The changes in cell number and shape, differentiation and genetic changes were compared after stimulation with static control groups. Methods: A simple protocol for the stimulation of cells in nanoscale Z-axis has been developed for this project (Figure 1). Piezo actuator (type: P-010.00H by PI CeramicO) connected to the cell culture dish moves the entire surface up and down. The amount of displacement is dependent on the voltage applied. Attaching an aluminium disk to the base of the Petri dish ensures faithful transfer of the vibration to the cells. Human mesenchymal stem cells from bone marrow (PromoCellO) were seeded with 104 cells/dish. After 4 hours seeding and cell settlement, the cells were stimulated for 24 hours, 1 week, and 2 weeks. Experiments were performed in an incubator with optimal temperature 37°C and 5% CO2 concentration. The Petri dish was 60 mm x 15mm standard tissue culture treated polystyrene dish (52mm base diameter) from CorningO Incorporated and cell culture media used was MEM alpha modification with L-Glutamine and nucleosides from PAA laboratories (Austria) supplemented with 10% FBS and antibiotics (penicillin and streptomycin). Results: We observed significant responses after 1 and 2-week stimulations in cell number, cell shapes and phenotypical markers. Microarray was performed for all groups. Cell count showed normal cell growth with stimulation. However, cell surface area, cell perimeter, and arboration after 1-week stimulation showed significant increases. Immunofluorescent studies have showed significant increase in osteocalcin production after stimulation. Conclusions: Nanoscale mechanical vibration showed significant changes in human mesenchymal stem cell behaviours. Cell morphology changed to become more polygonal and increased expression of the osteoblast markers were noted. These findings with gene regulation changes suggesting nanoscale mechanostimulation has stimulated osteoblastogenesis. Keywords: Mesenchymal, Nanoscale, Stem Cells.

Nanotopography Drives Stem Cell Fate Toward Osteoblast Differentiation Through α1β1 Integrin Signaling Pathway

The aim of our study was to investigate the osteoinductive potential of a titanium (Ti) surface with nanotopography, using mesenchymal stem cells (MSCs) and the mechanism involved in this phenomenon. Polished Ti discs were chemically treated with H2 SO4 /H2 O2 to yield nanotopography and rat MSCs were cultured under osteogenic and non-osteogenic conditions on both nanotopography and untreated polished (control) Ti surfaces. The nanotopography increased cell proliferation and alkaline phosphatase (Alp) activity and upregulated the gene expression of key bone markers of cells grown under both osteogenic and non-osteogenic conditions. Additionally, the gene expression of α1 and β1 integrins was higher in cells grown on Ti with nanotopography under non-osteogeneic condition compared with control Ti surface. The higher gene expression of bone markers and Alp activity induced by Ti with nanotopography was reduced by obtustatin, an α1β1 integrin inhibitor. These results indicate that α1β1 integrin signaling pathway determines the osteoinductive effect of nanotopography on MSCs. This finding highlights a novel mechanism involved in nanosurface-mediated MSCs fate and may contribute to the development of new surface modifications aiming to accelerate and/or enhance the process of osseointegration.

Neurons on nanometric topographies: insights into neuronal behaviors in vitro.

Topography, the physical characteristics of an environment, is one of the most prominent stimuli neurons can encounter in the body. Many aspects of neurons and neuronal behavior are affected by the size, shape, and pattern of the physical features of the environment. A recent increase in the use of nanometric topographies, due to improved fabrication techniques, has resulted in new findings on neuronal behavior and development. Factors such as neuron adhesion, neurite alignment, and even the rate of neurite formation have all been highlighted through nanotopographies as complex phenomena that are driven by intricate intracellular mechanisms. Nanotopographies are suitable platforms, not only for fundamental studies on neuronal development, but also in practical applications, including multielectrode array devices and neuro-regenerative medicine. We reviewed recent publications that address the effects of nanotopography on neurons and categorized the observed behaviors as adherence, directional guidance, or accelerated outgrowth. We also discussed possible biological mechanisms of the molecular and cellular responses to topography, and suggested future perspectives for this field.

Nanotopographical Effects on Mesenchymal Stem Cell Morphology and Phenotype

There is a rapidly growing body of literature on the effects of topography and critically, nanotopography on cell adhesion, apoptosis and differentiation. Understanding the effects of nanotopography on cell adhesion and morphology and the consequences of cell shape changes in the nucleus, and consequently, gene expression offers new approaches to the elucidation and potential control of stem cell differentiation. In the current study we have used molecular approaches in combination with immunohistology and transcript analysis to understand the role of nanotopography on mesenchymal stem cell morphology and phenotype. Results demonstrate large changes in cell adhesion, nucleus and lamin morphologies in response to the different nanotopographies. Furthermore, these changes relate to alterations in packing of chromosome territories within the interphase nucleus. This, in turn, leads to changes in transcription factor activity and functional (phenotypical) signalling including cell metabolism. Nanotopography provides a useful, non-invasive tool for studying cellular mechanotransduction, gene and protein expression patterns, through effects on cell morphology. The different nanotopographies examined, result in different morphological changes in the cyto- and nucleo-skeleton. We propose that both indirect (biochemical) and direct (mechanical) signalling are important in these early stages of regulating stem cell fate as a consequence of altered metabolic changes and altered phenotype. The current studies provide new insight on cell-surface interactions and enhance our understanding of the modulation of stem cell differentiation with significant potential application in regenerative medicine.

The Effect of Nanotopography on Modulating Protein Adsorption and the Fibrotic Response

Understanding and modulating the cellular response to implanted biomaterials is crucial for the field of tissue engineering and regenerative medicine. Since cells typically reside in an extracellular matrix containing nanoscale architecture, identifying synthetic nanostructures that induce desirable cellular behaviors could greatly impact the field. Using nanoimprint lithography, nanostructured patterns were generated on thin film polymeric materials. The ability of these surfaces to influence protein adsorption, fibroblast proliferation and morphology, and fibrotic markers was investigated. Nanostructured features with aspect ratios greater than five allowed for less protein adsorption, resulting in decreased fibroblast proliferation and rounded cellular morphology. These nanofeatures also induced significantly lower gene expression of collagen 1α2, collagen 3α1, and growth factors such as connective tissue growth factor, integrin linked kinase, transforming growth factor β1 (TGF-β1), and epidermal growth factor, key factors associated with a fibrotic response. The results demonstrate that select nanostructured surfaces could be used to modulate the fibrotic behavior in cells and have the potential to be used as antifibrotic architecture for medical implants or tissue engineering scaffolds.

Gene Expression Profiling and Histomorphometric Analyses of The Early Bone Healing Response Around Nanotextured Implants

While in vitro studies have shown that nanoscale surface modifications influence cell fate and activity, there is little information on how they modulate healing at the bone-implant interface. This study aims to investigate the effect of nanotopography at early time intervals when critical events for implant integration occur. Untreated and sulfuric acid/hydrogen peroxide-treated machined-surface titanium alloy implants were placed in rat tibiae. Samples were processed for DNA microarray analysis and histomorphometry. At both 3 and 5 days, the gene expression profile of the healing tissue around nanotextured implants differed from that around machined-surface implants or control empty holes, and were accompanied by an increase in bone-implant contact on day 5. While some standard pathways such as the immune response predominated, a number of unclassified genes were also implicated. Nanotexture elicits an initial gene response that is more complex than suspected so far and favors healing at the bone-implant interface.

Synergistic effects of nanotopography and co-culture with endothelial cells on osteogenesis of mesenchymal stem cells

Inspired by the aligned nanostructures and co-existence of vascular cells and stem cells in human cancellous bone, we quantitatively investigated the relative contributions of nanotopography and co-culture with human umbilical endothelial cells (HUVECs) to the osteogenesis of human mesenchymal stem cells (hMSCs). Although both nanotopography and co-culture independently enhanced the osteogenesis of hMSCs, osteogenesis was further enhanced by the two factors in combination, indicating the importance of synergistic cues in stem cell engineering. Interestingly, nanotopography provided a larger relative contribution to the osteogenesis of hMSCs than did co-culture with HUVECs. Furthermore, the osteogenesis of hMSCs was also affected by the density of parallel nanogrooves, exhibiting a maximum at a 1:3 spacing ratio, as defined as the ratio of ridge width to groove width. Analysis of (i) biochemical soluble factors, (ii) hMSC-substrate interaction and (iii) hMSC-HUVEC interaction suggests that (ii) and (iii) play a crucial role in mediating osteogenic phenotypes.

Micro‐nanopatterning as tool to study the role of physicochemical properties on cell–surface interactions

The current nano-biotechnologies interfacing synthetic materials and cell biology requires a better understanding of cell-surface interactions on the micro-to-nanometer scale. Cell-substrate interactions are mediated by the presence of proteins adsorbed from biological fluids to the substrate. The effect of nanotopography and surface chemistry on protein adsorption as well as the mediation effect on subsequent cellular communication with substratum is not well documented. This review discusses the role of physicochemical properties of cell-surface interactions and state-of-the-art methods currently available for micro-nanoscale surface fabrication and patterning. We also briefly discuss the current surface patterning techniques that allow the combination of a fine and independent control on nanotopography and chemistry to understand the effect of surface nanoscale substrate morphology on cell-surface interactions which has never been realized in previous reports. In addition, we discuss the influence of various chemical patterning and modulation of the nano-topography of surfaces on cell functionality and phenotype.

Transient adhesion mediated by ligand-receptor interaction on surfaces of variable nanotopography

Surface microtopography and nanotopography have been shown to influence cell adhesion and function, including proliferation and differentiation, leading both to fundamental questions and practical applications in the field of biomaterials and nanomedicine. However, the mechanisms of how cells sense topography remain obscure. In this study, we measured directly the effect of nanotopography on the kinetics of association and dissociation of ligand–receptor bonds, which are critically involved in the first steps of cell adhesion. We designed models of biological functionalised surfaces with controlled roughness varying from 2 to 400 nm of root mean square, and controlled ligand density. Tests of transient adhesion of receptor–coated microspheres on these surfaces were performed, using a laminar flow chamber assay. We probed Intercellular Adhesion Molecule ICAM–1–anti–ICAM–1 bond adhesion kinetics in the single molecule limit on smooth and rough substrates. Frequency of adhesion did not exhibit any noticeable dependence on roughness parameter, except at high bead velocity. Detachment rate was also independent of roughness. Finally, leucocyte transient adhesion tests were performed on similar substrates, using variable activating incubating media. Here also, no strong effect of roughness was observed in these conditions. Results are rationalised in terms of the role of local geometry on the access of ligands to receptors.

Novel Anodization Technique Using a Block Copolymer Template for Nanopatterning of Titanium Implant Surfaces

Precise surface nanopatterning is a promising route for predictable control of cellular behavior on biomedical materials. There is currently a gap in taking such precision engineered surfaces from the laboratory to clinically relevant implant materials such as titanium (Ti). In this work, anodization of Ti surfaces was performed in combination with block copolymer templates to create highly ordered and tunable oxide nanopatterns. Secondary ion mass spectroscopy (SIMS) and X-ray photoelectron spectroscopy (XPS) analyses showed that the composition of the anodized structures was mainly titania with small amounts of nitrogen left from the block copolymer. It was further demonstrated that these nanopatterns can be superimposed on more complex shaped Ti surfaces such as microbeads, using the same technique. Human mesenchymal stem cells were cultured on Ti microbead surfaces, with and without nanopatterns, in vitro to study the effect of nanotopography on Ti surfaces. The results presented in this work demonstrate a promising method of producing highly defined and well-arranged surface nanopatterns on Ti implant surfaces.

Ceramic nanopatterned surfaces to explore the effects of nanotopography on cell attachment

Surfaces with ordered, nanopatterned roughness have demonstrated considerable promise in directing cell morphology, migration, proliferation, and gene expression. However, further investigation of these phenomena has been limited by the lack of simple, inexpensive methods of nanofabrication. Here, we report a facile, low-cost nanofabrication approach based on self-assembly of a thin-film of gadolinium-doped ceria on yttria-stabilized zirconia substrates (GDC/YSZ). This approach yields three distinct, randomly-oriented nanofeatures of variable dimensions, similar to those produced via polymer demixing, which can be reproducibly fabricated over tens to hundreds of microns. As a proof-of-concept, we examined the response of SK-N-SH neuroblastoma cells to features produced by this system, and observed significant changes in cell spreading, circularity, and cytoskeletal protein distribution. Additionally, we show that these features can be imprinted into commonly used rigid hydrogel biomaterials, demonstrating the potential broad applicability of this approach. Thus, GDC/YSZ substrates offer an efficient, economical alternative to lithographic methods for investigating cell response to randomly-oriented nanotopographical features.

Genetic Responses to Nanostructured Calcium-phosphate-coated Implants

Nanostructured calcium phosphate (CaP) has been histologically and biomechanically proven to enhance osseointegration of implants; however, conventional techniques were not sufficiently sensitive to capture its biological effects fully. Here, we compared the conventional removal torque (RTQ) evaluation and gene expression in tissues around nanostructured CaP-coated implants, using real-time RT-PCR, with those of uncoated implants, in a rabbit model. At 2 wks, RTQ values were significantly higher, alkaline phosphatase (ALP) expression was significantly higher, and runt-related transcription factor 2 and tumor necrosis factor-α expressions were significantly lower in the coated than in the uncoated implants. This indicates that inflammatory responses were suppressed and osteoprogenitor activity increased around the CaP-coated surface. At 4 wks, although RTQ values did not significantly differ between the 2 groups, ALP and osteocalcin (OCN) were significantly up-regulated in the coated group, indicating progressive mineralization of the bone around the implant. Moreover, an osteoclast marker, adenosine triphosphatase, which indicates acidification of the resorption lacunae, was significantly higher for the coated implants, suggesting gradual resorption of the CaP coating. This study reveals detailed genetic responses to nanostructured CaP-coated implants and provides evidence that the effect of nanotopography is significant during the osseointegration cascade.

Stretched inverse opal colloid crystal substrates-induced orientation of fibroblast

Recently, there has been increasing interest in studying the interaction between mammalian cells and nanometer-sized structures. However, the effect of nanostructures on cell behavior, such as cell morphology and alignment, is still largely unknown. Inverse opal colloid crystal substrates, which can be stretched to produce nano-scale pore structures of different degrees of orientation, serve as a convenient model system to study the effect of nanotopography on cell morphology and cell alignment. In this work, we fabricated inverse opal colloidal crystal films that were either unstretched or stretched to three, four or six times their original length, producing pore structures of increasing degree of orientation. Human dermal fibroblast-fetal (HDF-f) cells were seeded and cultured on these four types of substrates. The results from fluorescence microscopy and scanning electron microscopy indicated that cells showed the highest degree of alignment when cultured on inverse opal colloid crystal films that were stretched the most (six times original length). The results also demonstrated that the orientation of nanostructures could affect both the morphology and growth direction of fibroblasts. The ability to control the direction of cell growth through the engineering of nanostructures could have important applications in tissue engineering, especially for tissues with anisotropic structures, such as cardiac muscle, blood vessel, tendon and ligament.

The interaction of cells and bacteria with surfaces structured at the nanometre scale

The current development of nanobiotechnologies requires a better understanding of cell-surface interactions on the nanometre scale. Recently, advances in nanoscale patterning and detection have allowed the fabrication of appropriate substrates and the study of cell-substrate interactions. In this review we discuss the methods currently available for nanoscale patterning and their merits, as well as techniques for controlling the surface chemistry of materials at the nanoscale without changing the nanotopography and the possibility of truly characterizing the surface chemistry at the nanoscale. We then discuss the current knowledge of how a cell can interact with a substrate at the nanoscale and the effect of size, morphology, organization and separation of nanofeatures on cell response. Moreover, cell-substrate interactions are mediated by the presence of proteins adsorbed from biological fluids on the substrate. Many questions remain on the effect of nanotopography on protein adsorption. We review papers related to this point. As all these parameters have an influence on cell response, it is important to develop specific studies to point out their relative influence, as well as the biological mechanisms underlying cell responses to nanotopography. This will be the basis for future research in this field. An important topic in tissue engineering is the effect of nanoscale topography on bacteria, since cells have to compete with bacteria in many environments. The limited current knowledge of this topic is also discussed in the light of using topography to encourage cell adhesion while limiting bacterial adhesion. We also discuss current and prospective applications of cell-surface interactions on the nanoscale. Finally, based on questions raised previously that remain to be solved in the field, we propose future directions of research in materials science to help elucidate the relative influence of the physical and chemical aspects of nanotopography on bacteria and cell response with the aim of contributing to the development of nanobiotechnologies.

The regulation of tendon stem cell differentiation by the alignment of nanofibers

Tendon is a specific connective tissue composed of parallel collagen fibers. The effect of this tissue-specific matrix orientation on stem cell differentiation has not been investigated. This study aimed to determine the effects of nanotopography on the differentiation of human tendon stem/progenitor cells (hTSPCs) and develop a biomimetic scaffold for tendon tissue engineering. The immuno-phenotype of fetal hTSPCs was identified by flow cytometry. The multipotency of hTSPCs toward osteogenesis, adipogenesis, and chondrogenesis was confirmed. Then, the hTSPCs were seeded onto aligned or randomly-oriented poly ( l-lactic acid) nanofibers. Scanning electron micrographs showed that hTSPCs were spindle-shaped and well orientated on the aligned nanofibers. The expression of tendon-specific genes was significantly higher in hTSPCs growing on aligned nanofibers than those on randomly-oriented nanofibers in both normal and osteogenic media. In addition, alkaline phosphatase activity and alizarin red staining showed that the randomly-oriented fibrous scaffold induced osteogenesis, while the aligned scaffold hindered the process. Moreover, aligned cells expressed significantly higher levels of integrin α1, α5 and β1 subunits, and myosin II B. In in vivo experiments, the aligned nanofibers induced the formation of spindle-shaped cells and tendon-like tissue. In conclusion, the aligned electrospun nanofiber structure provides an instructive microenvironment for hTSPC differentiation and may lead to the development of desirable engineered tendons.

Nanotopography-induced changes in focal adhesions, cytoskeletal organization, and mechanical properties of human mesenchymal stem cells

The growth of stem cells can be modulated by physical factors such as extracellular matrix nanotopography. We hypothesize that nanotopography modulates cell behavior by changing the integrin clustering and focal adhesion (FA) assembly, leading to changes in cytoskeletal organization and cell mechanical properties. Human mesenchymal stem cells (hMSCs) cultured on 350 nm gratings of tissue-culture polystyrene (TCPS) and polydimethylsiloxane (PDMS) showed decreased expression of integrin subunits α2, α6, αV, β2, β3 and β4 compared to the unpatterned controls. On gratings, the elongated hMSCs exhibited an aligned actin cytoskeleton, while on unpatterned controls, spreading cells showed a random but denser actin cytoskeleton network. Expression of cytoskeleton and FA components was also altered by the nanotopography as reflected in the mechanical properties measured by atomic force microscopy (AFM) indentation. On the rigid TCPS, hMSCs on gratings exhibited lower instantaneous and equilibrium Young's moduli and apparent viscosity. On the softer PDMS, the effects of nanotopography were not significant. However, hMSCs cultured on PDMS showed lower cell mechanical properties than those on TCPS, regardless of topography. These suggest that both nanotopography and substrate stiffness could be important in determining mechanical properties, while nanotopography may be more dominant in determining the organization of the cytoskeleton and FAs.

Effects of nanotopography on stem cell phenotypes

Stem cells are unspecialized cells that can self renew indefinitely and differentiate into several somatic cells given the correct environmental cues. In the stem cell niche, stem cell-extracellular matrix (ECM) interactions are crucial for different cellular functions, such as adhesion, proliferation, and differentiation. Recently, in addition to chemical surface modifications, the importance of nanometric scale surface topography and roughness of biomaterials has increasingly becoming recognized as a crucial factor for cell survival and host tissue acceptance in synthetic ECMs. This review describes the influence of nanotopography on stem cell phenotypes.

Ion Implantation as Surface Treatment for Osseointegration of Musculoskeletal Implants: From the Lab to the Clinic

AbstractA key process in a successful treatment of patients with a great variety of musculoskeletal implants requires a fast, reliable and consistent osseointegration. Among the parameters that affect this process, it is widely admitted that implant surface topography, surface energy and composition play an important role.Different surface modification techniques to improve osseointegration have been proposed and tested to date, but most focus on microscale features, and few control surface modifications at nanoscale. On the other hand, ion implantation modifies the outermost surface properties in relation to the nanotopography, chemical and physical characteristics at nanoscale. The meta-stable surface that results from the treatment, affects the adsorption of bio-molecules in the very first stages of the implant placement, and thus the signaling pathway that promotes the differentiation and apposition of osteoblast cells.This study aimed at assessing the performance, in terms of osseointegration levels and speed, of ion implanted titanium made implants. The study included several in vitro and in vivo tests. The latter, comprised different insertion periods and both experimental and commercial implants as comparative surfaces. The final stage of the study included clinical trials in human patients.In each and every case, bone integration improvement of tested materials/implants was achieved for the CO ion implanted samples. Furthermore, contact osteogenesis was observed in the ion implanted samples, unlike the Ti control samples, where only distance osteogenesis occurred, being this potentially one of the reasons for their faster healing and osseointegration process.Finally, the use of ion implantation as a surface modification tool that allows for evaluating the effects of nanotopography and composition changes independently is presented.

The behavior of MC3T3‐E1 cells on chitosan/poly‐L‐lysine composite films: Effect of nanotopography, surface chemistry, and wettability

In the present work, a series of composite films were produced from chitosan/poly-L-lysine blend solutions. The surface topography, chemistry, and wettability of composite films were characterized by atomic force microscopy (AFM), attenuated total reflection Fourier transform infrared (ATR-FTIR) spectroscopy, and contact angle assay, respectively. For all composite films, blending with poly-L-lysine induced changes in surface chemistry and wettability. Interestingly, it was also found that increasing poly-L-lysine weight fraction in blend solutions could result in different nanoscaled surface topographic features, which displayed particle-, granule-, or fiber-dominant morphologies. MC3T3-E1 osteoblast-like cells were cultured on all composite films to evaluate the effects of surface nanotopography, chemistry, and wettability on cell behavior. The observations indicated that MC3T3-E1 cell behavior was affected by surface topography, chemistry, and wettability simultaneously and that cells showed strong responses to surface topography. On fiber-dominant surface, cells fully spread with obvious cytoskeleton organization and exhibited significantly higher level of adhesion and proliferation compared with particle- or granule-dominant surfaces. Furthermore, fiber-dominant surface also induced greater expression of mature osteogenic marker osteocalcin and higher mineralization based on RT-PCR and von Kossa staining. The results suggest that topographic modification of chitosan substratum at the nanoscale may be exploited in regulating cell behavior for its applications in tissue engineering.

Nano hydroxyapatite structures influence early bone formation

In a study model that aims to evaluate the effect of nanotopography on bone formation, micrometer structures known to alter bone formation, should be removed. Electropolished titanium implants were prepared to obtain a surface topography in the absence of micro structures, thereafter the implants were divided in two groups. The test group was modified with nanosize hydroxyapatite particles; the other group was left uncoated and served as control for the experiment. Topographical evaluation demonstrated increased nanoroughness parameters for the nano-HA implant and higher surface porosity compared to the control implant. The detected features had increased size and diameter equivalent to the nano-HA crystals present in the solution and the relative frequency of the feature size and diameter was very similar. Furthermore, feature density per microm(2) showed a decrease of 13.5% on the nano-HA implant. Chemical characterization revealed calcium and phosphorous ions on the modified implants, whereas the control implants consisted of pure titanium oxide. Histological evaluation demonstrated significantly increased bone formation to the coated (p < 0.05) compared to uncoated implants after 4 weeks of healing. These findings indicate for the first time that early bone formation is dependent on the nanosize hydroxyapatite features, but we are unaware if we see an isolated effect of the chemistry or of the nanotopography or a combination of both.