Effect Of Addition Research Articles

Toxicity of botanical insecticides on different species of lace bugs

This study aimed to evaluate the toxicity of essential oils (EO) from Allium sativum (Amaryllidaceae) and Eucalyptus citriodora (Myrtaceae), commercial oil (CO) from Azadirachta indica (Meliaceae), and ethanolic extracts (EE) of Eugenia caryophyllata (Myrtaceae) and Piper nigrum (Piperaceae) on lace bugs (Hemiptera: Tingidae). The study also investigated the effects of exposure method, surfactant addition, and lace bug species on insecticide toxicity. The results indicated that assessing lace bug toxicity via contact with contaminated filter paper is a more effective method. Adding 5% detergent to E. citriodora EO 1% increased the mean mortality rates of the lace bug Gargaphia lunulata and Corythaica passiflorae from 34.11% to 94.00%. A. sativum EO 10%, E. citriodora EO 1%, and A. indica CO 1%, when combined with 5% detergent, caused high mortality rates in G. lunulata (76.00%, 77.67%, and 80.73%, respectively). However, these insecticides without detergent caused lower mortality in C. passiflorae (15.44%, 20.09%, and 11.15%, respectively), highlighting the significant impact of surfactant addition on the toxicity of essential and commercial oils. Piper nigrum EE 10% was toxic to all lace bug species. Conversely, the toxicity of Eugenia caryophyllata EE 10% varied among species, with mortality rates of 40% in G. lunulata, an average of 76.00% in Ulotingis sp. and Vartiga illudens, and 95.48% in C. passiflorae. In conclusion, despite variations in toxicity due to exposure method, surfactant addition, and lace bug species in laboratory bioassays, the botanical insecticides studied show promise for lace bug control.

Experimental research on the glass fiber-reinforced effect and mechanisms of sand powder 3D-printed rock-like materials

Conducting laboratory tests on natural rocks has significant value for the scientific and practical advancement of various types of rock engineering. The investigation of a rock-like materials that is similar in characteristics and structure to natural rock is key to the further advancement of laboratory rock experiments. The rapid development of sand powder 3D printing technology in recent years has provided a solution for fabricating rock-like materials. However, the low strength and elastic modulus of sand powder 3D-printed materials limit their application in simulating natural rocks. Therefore, this paper proposes a method to enhance the mechanical properties of sand powder 3D-printed materials utilizing glass fiber reinforcement by incorporating glass fiber into sand powder 3D-printed rock-like specimens. The mechanical properties and microstructural variations of the specimens with varying glass fiber contents are investigated utilizing mechanical testing, acoustic emission, scanning electron microscopy, etc. The results indicate that (1) it is feasible to utilize glass fiber to enhance the mechanical properties of sand powder 3D-printed materials; (2) The mechanical properties of sand powder 3D printing materials are significantly enhanced by the addition of glass fiber; and (3) the mechanisms controlling the reinforcement effect of glass fiber addition on sand powder 3D-printed specimens are determined by analyzing the microstructural characteristics of the specimens. This study improves the applicability of sand powder 3D-printed materials in simulating natural rock, thereby promoting the further application of 3D printing in the field of rock mechanics.

Controlled hydrolysis with preheating treatment and glutathione addition for enhanced foaming properties of soy protein isolate

This study investigates the effects of thermal treatment and glutathione addition on soy protein isolate (SPI) before pepsin-driven hydrolysis to obtain desirable hydrolysis with a high yield of soluble protein and good foaming properties. Various properties of SPI hydrolysates were measured to understand the change of SPI molecular composition related to foaming properties. The results revealed that the combination of glutathione and 55 °C thermal treatment yielded the most favorable SPI hydrolysate, characterized by excellent foaming capability (191.3%) and stability (93.1%), attributed to the highest relative composition (50.2%) of 7S. With the treatment temperature increasing from 55 °C to 75 °C, the reduction of 7S and generation of small molecular weight peptides negatively affected the foaming properties of SPI hydrolysates. The application of glutathione as a modulator, alongside mild thermal treatment, optimizes SPI hydrolysates for applications needing improved foaming and interfacial properties to achieve desirable foaming capability and stability. The study's findings offer promising potential for improving food products and formulations requiring enhanced foaming properties, with applications in industries like bakery and confectionery, leading to better texture, stability, and overall product quality.

Effect of Limestone Addition to Coal on SO2 Emission Control and Erosion-Corrosion Behaviour of Rifle Bore Bed Tube in AFBC Boiler

Effect of Limestone Addition to Coal on SO2 Emission Control and Erosion-Corrosion Behaviour of Rifle Bore Bed Tube in AFBC Boiler

Effects of Microplastics and Organic Fertilizer Regulation on Soil Dissolved Organic Matter Evolution.

Microplastics are pollutants of global concern nowadays. However, the effects of microplastics addition to soil as a carbon source and the combined effects of microplastics and organic fertilizer on soil-dissolved organic matter (DOM) evolution are still unclear. This study focused on the evolution of DOM in soil with the addition of microplastics and investigated the variations in the content and composition of DOM in unfertilized and fertilized soil with different particle sizes of microplastics. It was observed that the TOC concentration of the soil DOM in the treatment with organic fertilizer and microplastics increased more (129.97-161.43 mg kg-1) than that in the treatment with microplastics alone (117.17-131.87 mg kg-1) and was higher than that in the original soil (95.65 mg kg-1). According to the humic acid relative abundance in DOM after 40 days of incubation, the humic acid relative abundance in DOM of the soil samples with microplastics and organic fertilizers addition was found to be higher than that in those with microplastic addition alone, reaching more than 80% in a short time. In conclusion, the TOC concentration of the soil DOM increased with the addition of microplastics, and the increase was more pronounced when organic fertilizers and microplastics were added together. Moreover, the soil humification increased to a higher level in the short term with the combined addition of microplastics and organic fertilizers, which was maintained during the long-term incubation process.

Plant-Origin Additives from Boswellia Species in Emulgel Formulation for Radiotherapy Skin Care

The research objective of this study was to include plant-origin additives of the Boswellia species in the formulation of topical preparations for skin care after radiotherapy. The main factor damaging the skin during radiotherapy is the free radicals that form from water molecules and granulocytes in the inflammatory area; hence, the use of substances with antioxidant properties, including plant extracts rich in antioxidants, seems to be an alternative therapy in radiodermatitis treatment. A series of cosmetic preparations containing plant-origin additives from Boswellia species and corresponding placebo formulations were prepared. In order to assess the applicability of emulgels as oncocosmetics, their stability, physicochemical properties, rheological properties, and antioxidant capacity were determined. Somatosensory analysis was also performed. An attempt was also made to correlate the effect of plant-derived additives on the functional properties of the product determined via instrumental methods and the sensory properties. The most promising preparation was the emulgel containing the Soxhlet extract and essential oil (Em_SO) due to its high antioxidant properties compared to other preparations (% inhibition of 11.69) and polyphenol content (3.63 mg/dm3). Additionally, probands positively assessed all its features, including consistency (4.00), absorption (4.43), and hydration (4.71). The presence of significant correlations for % inhibition and polyphenols content with sensory and physicochemical characteristics of samples was indicated. There were low ratings for placebo preparations by probands, and the demonstrated correlations of odor with moisturization and distribution, oiliness and hydration with the % inhibition of the sample, and the content of polyphenols with the pH and size of the dispersed phase droplets proved the positive effect of the addition of plant-origin additives from Boswellia to the emulgel formulation on the functional and sensory properties.

Influence of Varied Phosphorus Fertilizer Ratios on the Rhizosphere Soil Microbial Community in Idesia polycarpa Seedlings

Phosphorus (P) is crucial for tree growth and development, and it significantly influences the rhizosphere microbial community. However, the effects of phosphorus addition on the microbial communities in the rhizosphere soil of Idesia polycarpa remain understudied. In this study, two-year-old “Yuji” Idesia polycarpa seedlings were used to investigate the effects of phosphorus fertilization at four different levels of 0 g (control, CK), 0.92 g (low phosphorus, LP), 1.83 g (medium phosphorus, MP), and 2.75 g (high phosphorus, HP) per plant. The fertilizers were applied every 40 days over 120 days. MiSeq high-throughput sequencing of the 16S rRNA and ITS1 genes was employed to analyze the microbial community composition and diversity of bacteria and fungi in the rhizosphere soil under different phosphorus levels. The results showed that compared with CK treatment, the application of phosphorus fertilizer changed the physicochemical properties of the soil. The LP treatment significantly increased the soil pH, while the HP treatment group exhibited the highest soil-available phosphorus (AP) content. LP treatment significantly increased the number of microbial OTUs in the early and rapid growth stages and the richness and diversity of microbial communities. In addition, the bacterial community structure was significantly correlated with soil pH and AP, while the fungal community had no significant effect. The primary metabolic pathway function of bacteria in the rhizosphere soil of Idesia polycarpa seedlings is mainly metabolism, while fungi are mainly biosynthesis. Compared with CK treatment, 20 differential metabolic pathways were screened out in the bacterial community. Only two differential metabolic pathways were screened out in the fungal community by LP treatment at 120 days. In summary, applying low-level phosphate fertilizer is conducive to promoting the diversity of rhizosphere soil microorganisms. Therefore, potted planting of Idesia polycarpa seedlings is more suitable for applying low phosphorus levels.

Effects of Turmeric Addition on the Physicochemical Characteristics and Preference Levels of Lemon-Date Infused Water

Effects of Turmeric Addition on the Physicochemical Characteristics and Preference Levels of Lemon-Date Infused Water

The Effect of Crown Ethers and Polyglycols on the Sustainability Indicators of Cyclohexane Oxidation Process

The crown ether or polyglycol additives to transition metal catalysts improve both the performance indicators, such as cyclohexane conversion, selectivity of target products, and the sustainability indicators of the oxidation process. It has been shown that the effect of the organic additives on the sustainability indicators is primarily due to a significant (up to 14.3%) increase in the selectivity of target cyclohexane oxidation products.

Evaluating the effect of cupric sulphate on morphogenic structure induction and plant regeneration in spring barley anther culture in vitro

Aim. Investigation was aimed to ascertain possibility to increase the efficiency of spring barley haploid production in anther culture in vitro by addition of cupric sulphate to the solution for cut tiller cold pretreatment and by increase of cupric sulphate concentrations in the media for morphogenic structure induction and plant regeneration. Methods. Cut tillers were cold pretreated for 5 days at 4ºC in water and in the solutions contained 5 µM and 10 µM of cupric sulphate. Isolated anthers were cultivated on agar solidified nutrient medium containing N6 macro-and MS micronutrients, physiologically active substances, maltose (9.0 %) and on the media with increased (10 µM) content of cupric sulphate. Results. No effect of cupric sulphate addition on cut tiller viability and morphogenesis in anther culture in vitro was found. The lowest plant regeneration frequency was obtained when cupric sulphate was added both to inductive and regenerative media. Сonclusions. Addition of cupric sulphate to the pretreatment solution as well as increase of this microelement concentration (up to 10 µM) in the nutrient media can’t be considered as the methodological approach suitable to enhance the efficiency of spring barley haploid production in anther culture in vitro.

Effect of Addition of Metal Oxide Nanoparticles on the Strength of Heat-Cured Denture Base Resins: Protocol for Systematic Review and Meta-Analysis of In Vitro Studies.

Metal oxide nanoparticle-reinforced polymethyl methacrylate (PMMA) has been shown to improve mechanical properties, such as strength. Different types of metal oxide nanoparticles have been used previously, but the comparative effect on the strength of heat-cured denture base resins remains unclear. This is a protocol for a systematic review and meta-analysis that will aim to pool evidence to compare and analyze the effects of the addition of different metal oxide nanoparticles, with varied sizes and concentrations, on the strength (flexural, impact, transverse, compressive tensile strength, and fracture toughness) of heat-cured PMMA. In addition, this review aims to analyze methodological factors, such as adherence to testing and sample-making guidelines, and the effects of surface treatments of the nanoparticles on the strength of heat-cured denture base resins. The protocol has been registered in the Open Science Framework. Search strategies to identify studies on the effect of metal oxide nanoparticles on the strength of heat-cured PMMA were developed by the subject matter expert in library science. Following this, a systematic search of 5 electronic databases (PubMed [NCBI], Scopus [Elsevier], Cochrane Library [Wiley], CINAHL Plus with Full Text [EBSCO], and Dimensions Free Web App) was conducted to retrieve in vitro studies published in English from January 2012 to October 2023. Along with this citation chasing, other online sources and gray literature were also searched. Furthermore, papers will be screened, and appropriate data elements will be extracted in a standardized manner. A risk-of-bias assessment will be performed using a modified Cochrane Risk of Bias Tool. A meta-analysis will be performed using a random-effects model. Search in databases resulted in 1837 papers, of which 1752 were duplicates, leaving 85 records that were screened for titles and abstracts based on the eligibility criteria. A similar search run on other online sources identified 129 papers that will be further analyzed for inclusion. The study was initiated in November 2023 and research questions and search strategies were formulated. The proposed study is expected to be completed by December 2024. This systematic review will comprehensively analyze the effects of the incorporation of metal oxide nanoparticles in heat-cured denture base resins on the strength of the material. We anticipate gaining a deeper understanding of the effects and method of use of metal oxide nanoparticles to improve the strength of PMMA denture base resins. PRR1-10.2196/59999.

Unravel the Distinctive Roles of Liquid and Solid Additives in Blade‐Coated Active Layer for Organic Solar Cell Modules

AbstractAlthough encouraging progress in spin‐coated small‐area organic solar cells (OSCs), reducing efficiency loss caused by differences in film uniformity and morphology when up‐scaled to large‐area modules through meniscus‐guided coating is an important but unsolved issue. In this work, in‐depth research is conducted on the influence of both liquid and solid additives on the film uniformity and morphology of active layer in blade‐coated PM6:L8‐BO binary system. The study reveals that high boiling point liquid additives like 1,8‐diiodooctane (DIO) used in blade‐coating not only delay the volatilization of the solvent but also trigger the Marangoni flow in the same direction as capillary flow, causing excessive aggregation of acceptors, therefore destroying device performance. On the contrary, the solid additive 2‐Iododiphenyl ether (IDPE), which is first reported in this work, can preserve the mechanism for improving device performance while effectively suppressing the excessive aggregation of acceptors during the film‐forming process in blade‐coating from halogen‐free solvent of toluene, resulting in highly homogeneous large‐area active layer films. Consequently, organic solar modules with an impressive efficiency of 15.34% with a total module area of 18.90 cm2 via blade‐coating based on PM6:L8‐BO are achieved. This study not only provides a deep understanding on the effect of liquid and solid additives during blade‐coating from the perspective of fluid mechanisms but also gives a pathway for the development of green solvent printed high‐efficiency OSCs.

Valorization of the solid fraction of wine lees through optimized accelerated autolysis: Effect of temperature, pH and solid concentration on free-amino acid concentration

Winemaking, as an agro-industrial process, generates substantial amounts of by-products, notably grape pomace and wine lees. The latter constitutes the residue left behind during the racking or bottling of wine, consisting mainly of dead yeast cells, ethanol, phenolic compounds, tartrates, and other compounds. Within the framework of by-products’ valorization, the rich content of dead yeast cells in wine lees render them conducive to the production of a yeast extract substitute through autolysis. In the present study, the effect of pretreatment, temperature, pH, and solid concentration on the efficiency of white wine lees autolysis was investigated. Moreover, the effect of enzyme addition and dynamic thermal protocols were investigated. Efficiency assessment was based on the increase of free α-amino nitrogen (FAN) found in the autolysate. The finding revealed a significant increase of FAN in all cases, with treated and untreated white wine lees reaching a maximum increase of 477% and 834%, respectively. Furthermore, the amino acid profile of autolysates was significantly affected by the autolysis temperature. These results hold promise for the comprehensive, holistic valorization of wine lees, suggesting their potential use as a nutrient source for microorganisms, such as wine yeast, or even as a grape must nitrogen modulator. Consequently, this by-product can be integrated back into the same industrial process from which it originates, namely winemaking. This not only aligns with the principles of circular economy but also underscores the potential for sustainable development within wineries.

Effect of Zn Addition on Phase Evolution in AlCrFeCoNiZn High‐Entropy Alloy

The addition of Zn to AlCrFeCoNi high‐entropy alloy (HEA) poses intriguing questions as to how it would affect phase evolution. Herein, the phase evolution in AlCrFeCoNiZn is studied using a combination of experimental techniques (X‐ray diffraction, scanning electron microscopy, energy‐dispersive spectroscopy, and differential scanning calorimetry) and computational (density‐functional theory [DFT], calculation of phase diagrams, and machine‐learning) methods. Mechanically alloyed and spark‐plasma‐sintered AlCrFeCoNiZn assumes a metastable single‐phase, body‐centered‐cubic (BCC) structure that undergoes diffusion‐controlled phase separation upon subsequent heat treatment to form separate (Al, Cr)‐rich, (Fe, Co)‐rich, and (Zn, Ni)‐rich phases. The formation of (Al, Cr)‐rich phase, not reported previously in AlCrFeCoNi‐based HEAs, is attributed to strong clustering tendency of Cr–Zn and Cr–Ni pairs, combined with the strong ordering of Zn–Ni pair, driving out Cr that in turn combines with Al to form a (Al, Cr)‐rich phase. In the DFT results, the formation of thermodynamically stable L12 phase is shown wherein Cr–Fe–Zn [Al–Ni‐Co] preferably occupy1a (000) [3c (0 ½ ½)] positions. The sluggish diffusional transformation to L12 phase from BCC precursors is attributed to the small stacking‐fault energy of AlCrFeCoNiZn. The equilibrated HEA exhibits a high microhardness of 8.24 GPa with an elastic modulus of 184 GPa.

Development of hydroxyapatite/poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate)/gelatin composite nanofibers to improve bone‐forming cell proliferation and mineral deposition

AbstractCalcium phosphate hydroxyapatite (HA) was successfully incorporated into poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate)/gelatin (PHBV/GEL) nanofibers through an electrospinning process in a hexafluoroisopropanol solvent (HFIP). The PHBV/GEL was electrospun and collected using a rotating metallic network to develop highly ordered nonwoven mats. The effects of HA addition on the morphologies of the obtained fibers were investigated using SEM. The average diameter of the fibers ranged around 700–900 nm, depending on the HA content. From a mechanical perspective, the addition of HA nanoparticles showed variations in tensile strength and elastic modulus values. The lowest tensile strength measured for neat PHBV/GEL was 0.37 ± 0.08 MPa with an elastic modulus of 9.45 ± 0.65 MPa, whereas the highest tensile strength reported for 5% HA‐loaded PHBV/GEL mats was 1.1 ± 0.4 MPa with an elastic modulus of 16.9 ± 0.39 MPa. In addition, cell viability, and mineral deposition were also studied using MC3T3‐E1 pre‐osteoblasts. The in vitro experiment results showed that the HA loaded‐PHBV/GEL mats provide optimal conditions for cell growth and osteogenic differentiation of MC3T3‐E1 cells. This study reveals the potential of PHBV/GEL/HA matrices in the development of novel guided bone‐regeneration (GBR) membranes for orthopedic and craniomaxillofacial surgery, by providing favorable structural features for attachment, growth, and differentiation of osteoblast cells.Highlights Simple and cheap electrospinning strategy toward network‐like fibrous mats. Microstructure, mechanical, and biological features were evaluated. Electrospun PHBV/GEL/HA promoted calcium phosphate deposition by MC3T3‐E1 cells.

The effect of aluminum addition on plasma nitriding for 42CrMo steel

In order to enhance the efficiency and performances of nitriding layer, aluminum was primarily introduced in the furnace during plasma nitriding by adding some FeAl around the samples. The results show that the process efficiency is dramatically enhanced more than 5 times comparing with traditional plasma nitriding (PN), with the effective hardening layer increasing from 224 μm to 1246 μm at 520 ℃/4h. Meanwhile, ultra-high surface hardness and excellent wear behaviors are obtained by Al-PN due to the formation of dispersed strengthening phases of AlN and FexAl in the nitriding layer, with the surface hardness increasing from 755 HV0.025 to 1251 HV0.025, and the wear rate decreased by a factor of approximately 2.

Residue Addition Can Mitigate Soil Health Challenges with Climate Change in Drylands: Insights from a Field Warming Experiment in Semi-Arid Texas

Texas cotton production is facing challenges from increased temperatures and extended droughts. We sought to determine whether applying a multi-species grass mulch on the surface of cotton fields in a semiarid region would mitigate some of the negative effects of climate change. We used open-top chambers (OTCs) to mimic climate warming and compared whether the effects of residue addition were similar between dryland and irrigated cotton fields located in the High Plains region of Texas during the summer of 2021. The OTCs raised the average air temperature by 2 °C. Under experimental warming, residue addition increased moisture content in non-irrigated (i.e., dryland) soils (+9.2%) and reduced the daily temperature range (by −1.4 °C) relative to uncovered soils. Furthermore, when pooled across irrigation and warming treatments, the addition of residue increased microbial biomass, soil respiration (+78.2%), and cotton yield (+15.2%) relative to uncovered soils. OTCs further enhanced the residue effects on microbial biomass by 34.9%. We also observed higher soil organic matter, microbial biomass, cotton biomass, and yield in irrigated fields compared to dryland, irrespective of residue addition. Our findings suggest that residue addition in dryland agriculture can mitigate the adverse effects of warming by stabilizing soil microclimates and promoting microbial growth and biomass by providing a more labile source of carbon, which, in turn, could boost the yield of cotton plants.

Biochar Applied in Places Where Its Feedstock Was Produced Mitigated More CO2 Emissions from Acidic Red Soils

Agricultural soil is the main source of greenhouse gas emissions, among which carbon dioxide (CO2) is an important greenhouse gas, impacting the global climate. In China, as a large rice-producing country, carbon sequestration and CO2 mitigation in paddy soil are crucial for the mitigation of global climate change. While biochar has been widely used in the mitigation of soil greenhouse gas emissions, the application site of biochar, i.e., whether or not it is the same as its feedstocks, may generate different effects on soil CO2 emissions due to the differences in the element and nutrient concentrations in its feedstocks, especially when applied in fertilized soil. In order to explore the effects of biochar application with different feedstocks on the mitigation of CO2 emissions from paddy soil, this experiment took paddy soil in a red soil area as the research object, using rice straw and Camellia oleifera fruit shell as raw materials to produce biochar (adding an amount of 40 g kg−1 soil) and urea as an external nitrogen source (adding an amount of 200 mg kg−1 soil). The effects of two different types of biochar derived from feedstocks with different producing origins on the CO2 emissions from paddy soil were studied via laboratory control incubation studies. The results showed that (1) the effects of rice straw biochar addition on the soil pH, NO3−-N and total available nitrogen (AN) content were significantly higher than those of Camellia oleifera fruit shell biochar (the scale of the increase was higher by 6.40%, 579.7% and 180.1%, respectively). (2) The CO2 emission rate and cumulative emissions of soil supplemented with rice straw biochar were significantly lower than in that supplemented with Camellia oleifera fruit shell biochar (decreases of 28.0% and 27.5%, respectively). Our findings suggest that the efficiency of emission mitigation of rice straw biochar is better than that of Camellia oleifera fruit shell applied to paddy soil. While future studies considering more types of greenhouse gases will be necessary to expand these findings, this study indicates that biochar prepared from in situ feedstock can be used to reduce greenhouse gas emissions in rice fields, so as to ensure sustainable development and achieve energy conservation and emission reduction goals. This study will benefit future agricultural practices when choosing biochar as a greenhouse gas mitigation strategy in the context of global warming, as well as other global changes following global warming, caused by elevated atmospheric greenhouse gases.

Effect of Mn Addition on the Corrosion and Fatigue Properties of a Progressive Secondary A357 Alloy

Effect of Mn Addition on the Corrosion and Fatigue Properties of a Progressive Secondary A357 Alloy

Theoretical reaction kinetics predictions for acetone and ketene with NH2 radicals: Implications on acetone/ammonia kinetic modeling

The cross-reaction kinetics of acetone/ketene (CH3COCH3/CH2CO) + amino (NH2) radicals are first theoretically reported for a wide range of conditions (T = 300–2500 K and P = 0.1–100 atm) in this work. The high-level electronic structure method CCSD(T)/cc-pVnZ(n = T, Q)//B3LYP-D3BJ/6–311++G(d,p) is used to explore the potential energy profiles on which the temperature- and pressure-dependence kinetic behaviors of the title reactions are characterized using the Rice-Ramsperger-Kassel-Marcus/Master Equation (RRKM/ME) theory. Corrections of the one-dimensional hindered rotor approximation and asymmetric Eckart tunneling effect are also included in the rate constant calculations. Furthermore, this work delves into the competitive relationships among the H-abstraction, NH2 addition and addition-dissociation reaction pathways. For CH3COCH3 + NH2, the H-abstraction reaction of CH3COCH3 is highly favored over the addition-dissociation reaction and other isomerization channels. For CH2CO + NH2, the reaction channel of addition-dissociation to form CH2NH2 + CO under low temperature conditions is more advantageous, while the H-abstraction reaction plays a dominant role under combustion conditions (T ≥ 1000 K). To reveal the impact of the studied reaction kinetics on model predictions, the rate constants of dominant reaction channels calculated in this work are incorporated into a kinetic model for the auto-ignition, oxidation and pyrolysis of CH3COCH3/NH3 mixtures. The simulated results show that the effect of the updated rate constants on ignition delay time is mainly at low temperatures and the promotion effect of CH3COCH3 addition on the ignition of NH3 presents a nonlinear enhancement. The updated rate constants can also accelerate the consumption of CH3COCH3 and CH2CO formation, while also influence the concentration distributions of other significant species (e.g., NH3, CO). Therefore, the cross-reaction kinetics of CH3COCH3/CH2CO + NH2 are critical in controlling the fuel consumption, important intermediate formation and ignition delay time of CH3COCH3/NH3 mixtures.