Effect Of Coagulation Research Articles

Effectiveness and Safety of Argon Plasma Coagulation in Patients with Haemoptysis Caused by an Endobronchial Malignancy.

Patients with central neoplasms and haemoptysis show low survival rates. Symptom control without recurrence 48 h after bronchoscopic interventions may improve the prognosis of these patients. Bronchoscopic argon plasma coagulation (APC) is a useful technique for endobronchial management of haemoptysis in patients with central malignancies. Nevertheless, limited data are available in the literature on its efficacy and safety and the main predictors of success are still unclear. An observational, prospective, single-centre cohort study was carried out to assess the efficacy (i.e., immediate bleeding cessation without recurrence during the following 48 h) of bronchoscopic APC in the treatment of patients with haemoptysis caused by endobronchial malignancies and the main predictors of success. A total of 76 patients with median age 75 years (interquartile range: 65-79) were enrolled. 67 (88.2%) patients had bleeding cessation without recurrence 48 h after bronchoscopic APC. A low rate of non-serious adverse events (5.3%) was recorded and a low (7.6%) recurrence rate of haemoptysis at 3.5 months after the procedure was also shown. No clinical, demographic and endoscopic variables related to a successful procedure at 48 h were found. This study demonstrates that bronchoscopic APC is an effective procedure in the treatment of patients with haemoptysis caused by endobronchial malignancies, regardless of the clinical characteristics of the patients, the endoscopic and histological features of the neoplasm and the severity of the symptom. Furthermore, it shows a low rate of complications and long-term efficacy in bleeding control.

The Effectiveness of Endoscopic Argon Plasma Coagulation (APC) of Dilated Gastrojejunostomy in the Treatment of Weight Regain After Omega Loop Gastric Bypass Surgery

The Effectiveness of Endoscopic Argon Plasma Coagulation (APC) of Dilated Gastrojejunostomy in the Treatment of Weight Regain After Omega Loop Gastric Bypass Surgery

Development of an ultrasound-guided radiofrequency ablation technique in the equine cadaveric distal limb: histological findings and potential for treating chronic lameness.

Radiofrequency (RF) relieves chronic pain in humans, but it is unexplored in horses affected by chronic lameness. This study aims to describe the technique and the histological effects of ultrasound (US)-guided radiofrequency ablation (RFA) of palmar digital nerves (PDNs) in horse's fetlock and pastern, ex vivo. After assessing the US anatomy of lateral and medial PDNs in fetlock and pastern in vivo (n = 10 horses; 20 forelimbs), US-guided RFA was performed on these sites in cadaveric forelimbs (n = 10) applying four different settings with increasing invasiveness (n = 40 total treatments): 60°C, 6 min (GROUP LOW); 70°C, 4 min (GROUP MEDIUM); 90°C, 2 min (GROUP HIGH); 80°C, 8 min (GROUP VERY HIGH). Needle-tip-to-nerve proximity was assessed with US and methylene blue, injected through the port of the RF needle. Nerves were collected for microscopical assessment. Transverse palmaro-lateral and palmaro-medial US images of fetlock and pastern detected PDNs consistently, close to the palmar digital artery. With in-plane US technique, RFA was performed at target in 31/40 cases, with significantly higher number of failures in fetlock (p = 0.008). PDNs histology identified thermal injury/coagulation with axonal degeneration and collagen homogenation. Nuclear smearing of arterial leyomyocytes was also observed. Nerve coagulation was significantly associated with treatment (p = 0.03) and needle-tip-to-nerve proximity (US distance: p = 0.009; blue distance: p = 0.04). The PDNs were easily visualized and reached with the RF needle by US in-plane-guided technique. RFA produced axonal thermal damage and intensity-related coagulation effectiveness. To ensure effective nerve coagulation, it is crucial that the needle is accurately positioned in close proximity to the target nerve. Based on the histopathological findings, HIGH and VERY HIGH RFA treatments might be worth of being tested in vivo in clinical studies aimed at treating chronic lameness of the distal forelimb in horses.

Low permeability sealing materials based on sewage, digestate and incineration industrial by-products in the final landfill cover system

This study explores repurposing municipal solid waste from the sewage, digestate, and incineration industries as landfill-sealing materials, aligning with circular economy principles. The main materials include digested sewage sludge (DSS), pretreated digested sewage sludge (PDSS), and digestate sludge (DS), with biomass bottom ash (BBA) and Al-anodizing waste (AAW) introduced as additives, complemented by 1.5 wt% water glass to enhance the sealing performance. The research evaluates the characteristics of the various treated and sourced sludges and additives, assessing their influence on water permeability, reaction products and the environmental consequences. Results demonstrate the achievement of low permeability in the sludge-based sealing materials, with optimal performance observed in the specimens prepared with DSS and AAW (k value = 3.78 ×10−12 m/s). Thermal Pressure Hydrolysis pre-treatment in sewage plants reduces the organic content in PDSS, resulting in a slight increase in permeability. DS-based specimens exhibit higher permeability due to their relatively lower organic content in DS. Gypsum is the primary reaction product attributed to leachable sulphate in BBA and AAW. Water glass addition in BBA-modified specimens promotes silica gel formation, while AAW effectively reduces matrix permeability as an externally added gel-like substance. Additionally, heavy metals (As, Pb and Cr) derived from the by-products are effectively immobilized in the sealing materials owning to the coagulation effect of organic matter in the sludge and sulphates in the products. Overall, this novel approach to landfill sealing materials exhibits promising applications in the Netherlands, offering cost savings and reduced environmental impact by recycling industrial by-products.

Effect of different coagulants on physicochemical properties of paneer made from buffalo milk

This study was carried out to develop paneer with buffalo milk under four different coagulants: citric acid (T1), Lime (T2), Vinegar (T3), and Yoghurt (T4). The paneer samples were analyzed for nutritional composition, titratable acidity, pH and colour during the storage. Sensory evaluation was done for fresh paneer samples using a seven-point hedonic scale. The result revealed that the pH of developed paneer under T1, T2, T3 and T4 were 1.67, 2.09, 2.54, and 4.16, respectively. Titratable acidity and pH of paneer were (p<0.05) varied with 5 days storage at 70C. The highest yield (p<0.05), the whitest and hardest body of paneer was observed under T3. Moisture content was (p<0.05) higher under T3, and total solids, ash and fat were significantly (p<0.05) higher in T1. Sensory evaluation revealed that the different types of coagulants were significantly influenced (P<0.05) by sensory attributes. The overall acceptability was highest under T1. Conclusively, paneer produced with buffalo milk using vinegar and citric acid coagulants resulted in the most suitable products compared to other coagulants used in the present study.

Proteomic Comparisons of Caprine Milk Whole Cream Buttermilk Whey and Cheese Whey Cream Buttermilk.

Buttermilk, a potential material used to produce milk fat globule membrane (MFGM), is obtained as a byproduct of butter making from milk whole cream and cheese whey cream. This study investigated the effects of rennet and acid coagulation on the protein profiles of buttermilk rennet-coagulated whey (BRW) and buttermilk acid-coagulated whey (BAW). They were compared to those of whey cream buttermilk (WCB). Rennet coagulation was more efficient in removing casein, while retaining more IgG and lactoferrin than acid coagulation. BRW had more MFGM than BAW. Butyrophilin, xanthine dehydrogenase, and mucin1 were significantly higher (P < 0.05) in BRW, while fatty acid-binding protein 3 was enriched in BAW. KEGG analysis showed that complement and coagulation cascades had the greatest differences, and the abundance of proteins involved in this signaling pathway in BRW and BAW was higher, suggesting their potential anticoagulant and anti-inflammatory activity. BAW had higher apolipoprotein A4 and transcobalamin 2, which are essential carriers for transporting long-chain fatty acids and vitamin B12 from the intestine to the blood. Therefore, BAW intake might improve lipids and vitamin B12 absorption. This study can help deepen the understanding of protein composition of MFGM-enriched whey and facilitate the production of MFGM proteins for infants and old-aged populations.

Tofu Wastewater Treatment Using Biocoagulant Moringa Seed Powder (Moringa Oleifera L)

Indonesia has various types of vegetation which are used as natural coagulants or biocoagulants. Coagulants can be divided into chemical coagulants and natural coagulants (biocoagulants). Biocoagulants are more environmentally friendly and can be obtained from natural ingredients, both animals and plants, one of which is Moringa seeds. Moringa seeds or with the Latin name Moringa oleifera are a type of plant from the Moringaceae family. From several previous studies, Moringa seeds were used as a more economical and environmentally friendly wastewater treatment method. Moringa seed biocoagulant in powder form is made from ripe and old moringa seeds and contains less than 10% water. Moringa seed biocoagulant contains 4αL-rhamnosyloxy-benzylisothiocyanate and is a determinant of coagulation effectiveness. This active substance is able to absorb pollutants in waste water. This research aims to treat tofu waste with moringa seed biocoagulant in reducing pollutant parameters, namely TSS (Total Suspended Solid) and COD (Chemical Oxygen Demand). Results of the removal of pollutants from moringa seed powder biocoagulant in tofu waste water the efficiency value obtained for each TSS parameter, and the COD for the TSS parameter is 54.4%. and for the COD parameter of 14.6%, it can be concluded that the efficiency value for each parameter still does not meet the effectiveness value.

Comparison of aluminum formate and traditional aluminum coagulants in structure, hydrolysates, coagulation behavior, and its corrosion resistance advantage

Aluminum formate (AF) has been considered as a superior coagulant that can decompose under the UV light without causing equipment corrosion during water treatment. The main components of the aluminum formate coagulant are aluminum formate (C3H3AlO6), aluminum formate hydrate (C3H3AlO6·3H2O), and aluminum hydrogen formate (C3H3AlO6·2H2O2). Analysis of the hydrolyzed products revealed that the content of added formic acid during the synthesis of aluminum formate is a crucial factor influencing its coagulation effectiveness. Increasing the HCOOH/Al ratio from 1.5 to 4.0 resulted in smaller mass-to-charge ratio (m/z) and higher positive charge for AF hydrolysates, with fewer undetected aluminum species present. Hydrolysates of AF 1.5 exhibited similar characteristics to those of aluminum polychloride, while AF 3.0 demonstrated optimal glucan removal efficiency (>55 %) through physical absorption rather than chemical bond bridging as the primary coagulation mechanism. The jar test results for bovine serum albumin (BSA) coagulation removal indicated a decrease in removal efficiency as the HCOOH/Al molar ratio increased from 1.5 to 4.0, accompanied by a decrease in pH conditions from 6.35 to 7.27. The highest BSA removal efficiency (58 %) was achieved using AF 1.5 at pH 6.35, suggesting that BSA molecules were captured by aluminum formate through chemical bonds such as NO-Al-, Al2(SO4)3, unlike the physical absorption effect observed in glucan coagulation process. Furthermore, it should be noted that compared to traditional aluminum salt coagulants, aluminum formate exhibits excellent pipeline corrosion resistance properties.

A two-step approach of ozonation pre-oxidation and re-flocculation to regulate drinking water treatment sludge: Sludge reflux and enhanced coagulation

The characteristics of drinking water treatment sludge (DWTS) are important factors limiting the coagulation effect after sludge recycling. To enhance the coagulation performance of DWTS recycling, a two-step pretreatment strategy was employed, including ozonation pre-oxidation and the re-flocculation of polymeric aluminum chloride (PACl) and polyacrylamide (PAM). Ozonation pre-oxidation transformed insoluble organic matter into dissolved organic matter (DOM), reducing the organic content by 12.58% for UV254 and 8.94% for dissolved organic carbon (DOC) in the DWTS recycling process. Following re-flocculation with PACl and PAM, the size, zeta potential, and settling velocity of the ozonated sludge were further increased from 30.27 μm, −12.57 mV, and 2.06 mm/s to 187.6 μm, −3.49 mV, and 6.42 mm/s, respectively, which exhibited higher turbidity removal in DWTS recycling process. Following the two-step method, larger, denser, and more reversible flocs were observed during the recycling process, and the settling efficiency of the flocs was enhanced, which enabled achieving better water quality in a shorter duration. These findings provide innovative insights into drinking water plant optimization and sludge management.

Preparation of healing-promoting and fibrosis-inhibiting asymmetric poly(ethylene glycol-b-L-phenylalanine)/cRGD-modified hyaluronate sponges and their applications in hemorrhage and nasal mucosa repair

Acute or chromic bleeding, such as epistaxis, requires hemostatic materials to assist hemostasis. Even in complex cases, hemostatic materials must have other functions, including the promotion of healing and prevention of adhesion. Herein, a series of fibrosis-suppressive functional cRGD-modified crosslinking hyaluronic acid sponges were prepared. The in vitro hemostatic efficiency and mechanism were determined using blood clotting time, blood coagulation index, lactate dehydrogenase (LDH) and thromboxane B2 (TX-B2) ELISA, and proteomics. Among the prepared sponges, both poly(ethylene-b-L-Phe) (PEBP)-and cRGD contained SPN4 and exhibited the highest platelet concentration and activation efficiency as well as the most effective coagulative effect. In addition, no significant cytotoxicity was observed for the sponges in rat airway epithelial cells. The in vivo hemostatic and adhesion-preventive effects of the sponges were evaluated using rat models of liver injury and sidewall defect-cecum abrasion. PEBP-containing sponges effectively prevented postoperative adhesion and cRGD-modified sponges exhibited excellent hemostatic effects. Finally, the comprehensive repair effects of the sponges were evaluated using a rabbit maxillary sinus mucosal injury model, based on CT, MRI examination, and pathological staining. SPN4 exhibited the best comprehensive reparative effects, including the promotion of mucosal repair and infection inhibition. Thus, SPN4 is a promising multifunctional hemostatic material.

Synergistic removal of organics from semi-coke wastewater by persulfate and cyanide tailings

In this study, the persulfate and cyanide tailings (PS-CTs) were used for the synergistic treatment of semi-coke wastewater to achieve advanced oxidation and in-situ coagulation removal of organics in semi-coke wastewater. The effects of persulfate concentration, reaction temperature, cyanide tailing concentration and initial pH on chemical oxygen demand (COD) removal efficiency were investigated, and the synergistic mechanism in the treatment process was further explored. The results showed that the removal efficiency of COD in semi-coke wastewater was 94.49 % under the conditions of persulfate concentration 0.025 mol/L, reaction temperature 60 °C, cyanide tailings concentration 5 g/L, the initial pH value of 3. The results of the mechanistic analysis showed that in PS-CTs system, pyrite was oxidized by persulfate. The dissolved Fe2+ activated the persulfate to produce SO4− and OH and generated Fe3+ in situ. The hydrolysis of Fe3+ produced a series of complex ions and amorphous iron hydroxides, which could remove some organics by adsorption and sweeping netting. The organics in semi-coke wastewater were effectively removed by the combined effect of oxidation and coagulation. In addition, the PS-CTs system also achieved the oxidative de-cyanidation of cyanide tailings simultaneously, and the total cyanide concentration of treated cyanide tailings was 8.21 mg/kg, and the leaching cyanide concentration was 0.12 mg/L, which was in line with the emission standards. This process implemented the concept of “treating waste with waste”, and provided theoretical support for the treatment of semi-coke wastewater and other organic wastewater.

CS585 Demonstrates Favorable Selectivity and Sustained In Vivo Action in Preventing Platelet Activation and Thrombosis Compared to Existing IP Receptor Agonists

Anti-platelet therapeutics are common tools in the treatment of thrombotic diseases, decreasing morbidity and mortality resulting from cardiovascular complications. However, many patients remain at risk for a cardiovascular event while others experience bleeding due to hemostatic dysregulation. The need for target specificity and lasting stability presents a major challenge in the development of novel antithrombotic therapeutics. While increasing platelet cAMP levels through activation of the prostacyclin (IP) receptor is a viable therapeutic approach, the IP receptor is currently considered a challenging target due to the non-selectivity and instability of existing IP agonists. Our lab has developed a novel IV and orally available IP receptor agonist, CS585, with selectivity towards the IP receptor and sustained in vivo protection from injury-induced thrombosis without observed bleeding. CS585 demonstrates IP receptor-dependent activity, leading to activation of protein kinase A (PKA), a key player in inhibitory signaling. While indications of current IP receptor agonists are limited to pulmonary arterial hypertension and temporary relief of peripheral artery disease, CS585 presents a new approach to selectively regulate platelet activation and thrombosis. CS585 and other IP receptor agonists, iloprost and selexipag, were assessed by direct comparison to elucidate potential differences in selectivity and sustained action. Selectivity was determined using aggregation and VASP phosphorylation. The effects of CS585 are inhibited by pharmacological inhibition of the IP receptor, but not by inhibition of the DP1, EP2, or EP4 prostaglandin receptors. Meanwhile, the activities of iloprost and selexipag were affected by other prostaglandin inhibitors, supporting the improved selectivity toward activation of the IP receptor with CS585. Arterial thrombosis was measured and quantified in a laser-induced cremaster thrombosis assay in IP agonist-treated WT mice to assess platelet activation and thrombus formation in vivo in mouse models of thrombosis. In WT mice treated with CS585, we observed sustained effects of CS585 following both IV and oral administration. Platelets and fibrin were labeled and accumulation at the site of injury was measured using intravital microscopy. In contrast to the FDA-approved IP receptor agonists (iloprost and selexipag) which showed short-term protection from thrombosis, treatment with CS585 resulted in sustained inhibition of clot and fibrin formation at the site of injury in the same model between 24 and 48 hours post-administration. To determine if the anti-thrombotic effects of CS585 impact coagulation, coagulation parameters were assessed in whole blood using thromboelastography (TEG). Treatment with CS585 did not impact coagulation parameters in whole blood, while a significant increase in lysis was observed with iloprost. Here, we show for the first time a head-to-head comparison of CS585, a novel IP receptor agonist, with selexipag and iloprost. Our preclinical results with CS585 indicate a favorable profile for inhibiting platelet activation and clot formation and demonstrate a sustained duration of action in mice in the ability of CS585 to inhibit platelet activation through multiple routes of administration. Importantly, CS585 does not affect coagulation parameters and previous studies demonstrated no potential for increased bleeding in mouse models. Overall, CS585 provides a new option of activating the IP receptor to decrease platelet reactivity and could represent the first viable option for targeting the IP receptor on platelets for primary inhibition of thrombosis with a reduced risk of bleeding.

Recent Advances in Natural Deastringency and Genetic Improvement of Chinese PCNA Persimmon (Diospyros kaki)

Persimmon (Diospyros kaki) is a worldwide fruit cultivated mainly in the East Asia, Mediterranean, Caucasus, Latin America, and Oceania regions. This fruit contains abundant proanthocyanidins (PAs, also called condensed tannins), whose biosynthesis is the main cause of fruit astringency. As the original centre and top producing country, China has discovered a unique type with desirable natural deastringency, the Chinese pollination-constant non-astringent (C-PCNA) persimmon. Studies have revealed that the C-PCNA trait is controlled by a single and dominant locus, which differs from that of another type, the Japanese PCNA type, with recessive loci. In the C-PCNA type, accumulating evidence has shown that the astringency removal process involves two pathways (“dilution effect” and “coagulation effect”). Moreover, molecular marker-assisted selection (MAS) for the natural deastringency trait locus in C-PCNA has been used to test the non-astringency/astringency trait of hybrid offspring at the seedling stage. Importantly, persimmon can bear male flowers, female flowers, and perfect flowers, but sex-linked MAS has been developed for female-only persimmon. This sex-linked MAS, together with astringency-linked MAS and embryo rescue technology, may even shorten the conventional cross-breeding period of about 2–3 years. In addition, recently studies have established a stable genetic transformation system for persimmon transgenic improvement. Despite these efforts, how synthetic PAs and metabolism pathways lead to a deastringent trait remains unclear for persimmon. Thus, our review summarizes the latest research progress on the natural deastringency mechanism in C-PCNA, and we provide a new viewpoint for the genetic improvement of persimmon breeding in China.

Important role of turbulence on the distribution of particle radioactivity in the nuclear explosions

The distribution of particle radioactivity is one of the most important source items of radioactive fallout prediction model for nuclear explosion. For radioactive particles with the diameter larger than 0.5 μm, the influence of turbulent coagulation cannot be ignored. However, few scholars have considered the role of turbulence in the study of the distribution of particle radioactivity. The General Dynamic Equation (GDE), which is solved using the Multi-Monte Carlo method, is used in this study to establish a new model of the distribution of particle radioactivity that takes the impact of turbulent coagulation into account. The results present that the surface and volume distributions of particle radioactivity are closer to those of the Defense Land Fallout Interpretative Code (DELFIC) model, and the relative error of the surface (volume) distribution reduces from 1.243 (0.687) to 0.945 (0.284) when compared to the previous model that simply takes Brownian coagulation into account. The geometric median diameter of total particle radioactivity increases as the solidification temperature increases and as the particle size range increases when considering the influence of various geological conditions. When considering the effects of turbulent coagulation, the differences in the particle radioactivity produced under different geological conditions are smaller than those only considering the Brownian coagulation. This study highlights the importance of turbulent coagulation on the distribution of particle radioactivity in the nuclear explosions.

Insight into coagulation/flocculation mechanisms on microalgae harvesting by ferric chloride and polyacrylamide in different growth phases

FeCl3 and polyacrylamide (PAM) had been used to investigate the effect of coagulation, flocculation, and their combination on algae cells and extracellular organic matter (EOM) at different phases. PAM tended to aggregate particle-like substances, while FeCl3 could interact with EOM. The content of EOM kept rising during the algae growth cycle, while OD680 peaked at about 3.0. At stationary phase Ⅰ, the removal efficiencies of UV254, turbidity and OD680 of the suspension conditioned with FeCl3 + PAM reached (88.08 ± 0.89)%, (89.72 ± 0.36)% and (93.99 ± 0.05)%, respectively. Nevertheless, PAM + FeCl3 exhibited the worst efficiency because of the release of EOM caused by the turbulence. The results suggested that algal cells served as a coagulation aid to facilitate floc formation, while excessive EOM deteriorated harvesting performance. The process of FeCl3 + PAM at stationary phase Ⅰ appears to be a promising technology for microalgae harvesting.

Research on the hemostasis and coagulation effects of Callicarpa nudiflora based on the spectrum-effect relationship

Callicarpa nudiflora (C. nudiflora) is widely used in the treatment of bleeding related diseases. However, its main material basis has not been fully defined which limits the in-depth study of screening out the material basis of hemostasis and coagulation from C. nudiflor. In this study, the method of spectrum-effect relationship was used to quickly screen the material basis of hemostasis and coagulation. The five compounds related to hemostasis and coagulation were screened as Alyssonoside (P24), Luteolin (P25), Quercetin (P26), Apigenin (P28), Isorhamnetin (P29). And the contribution of these five peaks to hemostasis and coagulation efficacy was P24 > P25 > P28 > P26 > P29.

Effects of different sodium species on PM10 formation during high-sodium coal gasification by using McKenna burner

PM10 generated from high-sodium coal combustion results in considerable ash deposition. A comparable occurrence may arise during high-sodium coal gasification. This work added NaCl and NaAc to the HCl acid-washed high-sodium coal to investigate their contributions to PM10 formation during entrained flow gasification. The PM10 from HCl acid-washed and NaAc-addition coal gasification showed a bi-modal distribution, while it exhibited a tri-modal one for the NaCl-addition coal. NaCl and NaAc increased PM10 production, but this increase is relatively minimal compared to coal combustion due to the lower Na release rate. NaCl formed more PM1 than NaAc because of variations in their transformation mechanisms. NaCl vaporized and directly formed flocculent PM with sizes less than 1 μm by nucleation/condensation without sulfation. NaAc was mainly released as Na atoms formed spherical PM with sizes less than 0.255 μm by hydrochlorination and nucleation/condensation. The simulations suggested that the faster release rate of NaCl than NaAc was the main reason for this phenomenon. Besides, simulation results also indicated that gasified refractory elements have a strong coagulative effect on NaCl and NaAc, which promoted particle growth and determined the location and peak of the PM1.

Invited review. Milk clotting enzymes: A transcendental decision in goat´s milk cheese quality

Cheese production has increased more than 3.5-fold since 1960, while animal rennet production has declined, thus other proteolytic enzymes have been developed. Cheese quality depend on many factors, some of them are linked to milk composition (genetic aspects: species, breed and animal, lactation stage and number, type of kidding, animal feeding and health, offspring season, etc.) and other due to cheesemaking aspects and storage processing (raw or pasteurized milk, coagulation enzymes and coagulation parameters (temperature and time), moulding, drainage, salting, ripening, smoking, etc.). All these factors interact and only under experimental conditions it is possible to analyse the effect of any particular feature by itself. Between all these factors, milk coagulation process is one of the most important steps for the cheese final characteristics. The differences in protein matrix degradation due the origin of coagulant agents affect cheese texture, odour, flavour and taste and consequently consumer’s preference. This last assertion is especially important for the economic choices of the dairy firm. In the past, cheesemakers used animal rennet for curdling milk; it was produced by macerating the stomachs obtained from suckling ruminants according to the local uses, although plant coagulant was used in some typical specific cheesemaking processes. Nowadays, several types of coagulant are available, with different origin and variability in proteases for milk coagulation: animal origin rennet and vegetable coagulants than can be both artisan or commercial, microbial proteases and recombinant from genetically modified microorganism with cDNA for chymosin. In this paper the state of the art of these enzymes used in goat´s cheese industry is presented, also focused on artisan cheeses. Coagulant effect in physical-chemical and sensory profile of cheeses is analysed, also under an ethical and religious point of view. Finally, the importance of the market target in producing new cheese with vegetable coagulant is met, with an overview on the trends on cheese labelling issue.

Tailored chitosan/glycerol micropatterned composite dressings by 3D printing for improved wound healing

Wound infection control is a primary clinical concern nowadays. Various innovative solutions have been developed to fabricate adaptable wound dressings with better control of infected wound healing. This work presents a facile approach by leveraging 3D printing to fabricate chitosan/glycerol into composite dressings with tailored micropatterns to improve wound healing. The bioinks of chitosan/glycerol were investigated as suitable for 3D printing. Then, three tailored micropatterns (i.e., sheet, strip, and mesh) with precise geometry control were 3D printed onto a commercial dressing to fabricate the micropatterned composite dressings. In vitro and in vivo studies indicate that these micropatterned dressings could speed up wound healing due to their increased water uptake capacity (up to ca. 16-fold@2 min), benign cytotoxicity (76.7 % to 90.4 % of cell viability), minor hemolytic activity (<1 %), faster blood coagulation effects (within 76.3 s), low blood coagulation index (14.5 % to 18.7 % @ 6 min), enhanced antibacterial properties (81.0 % to 86.1 % against S. aureus, 83.7 % to 96.5 % against E. coli), and effective inhibition of wound inflammation factors of IL-1β and TNF-α. Such tailored micropatterned composite dressing is facile to obtain, highly reproducible, and cost-efficient, making it a promising implication for improved and personalized contaminated wound healing.

In-depth study of the removal of Mn(II) by Fe(VI) treatment and the profound influence of NOM on floc formation and properties

The presence of manganese(II) in drinking water sources poses a significant treatment difficulty for water utilities, thus necessitating the development of effective removal strategies. Treatment by Fe(VI), a combined oxidant and coagulant, has been identified as a potential green solution; however, its effectiveness is hampered by natural organic matter (NOM), and this underlying mechanism is not fully understood. Here, we investigated the inhibitory effect of three different types of NOM, representing terrestrial, aquatic, and microbial origins, on Mn(II) removal and floc growth during Fe(VI) coagulation. Results revealed that Fe(VI) coagulation effectively removes Mn(II), but NOM could inhibit its effectiveness by competing in oxidation reactions, forming NOM-Fe complexes, and altering floc aggregation. Humic acid was found to exhibit the strongest inhibition due to its unsaturated heterocyclic species that strongly bond to flocs and react with Fe(VI). For the first time, this study has presented a comprehensive elucidation of the atomic-level structure of Fe(VI) hydrolysis products by employing Extended X-ray Absorption Fine Structure Spectroscopy (EXAFS). Results demonstrated that NOM strengthened single-corner and double-corner coordination between FeO6 octahedrons that were consumed by Mn(II), resulting in an increased contribution of γ-FeOOH in the core-shell structure (γ-FeOOH shell and γ-F2O3 core), thereby inhibiting coagulation effects. Furthermore, NOM impeded the formation of stable manganite, resulting in more low-valence Mn(III) being incorporated in the form of an unstable intermediate. These findings provide a deeper understanding of the complex interplay between Fe coagulants, heavy metal pollution, and NOM in water treatment and offer insight into the limitations of Fe(VI) in practical applications.