Effective Volume Research Articles

Effect of salinity on the bioluminescence intensity of the heterotrophic dinoflagellates Noctiluca scintillans and Polykrikos kofoidii and the autotrophic dinoflagellate Alexandrium mediterraneum

Many dinoflagellate species are bioluminescent, which is one of the anti-predation mechanisms in these species. In addition, dinoflagellate species experience a wide range of salinities in the ocean. However, the effects of salinity on their bioluminescence intensity has only been investigated for one species. Here, we explored the effect of salinity on the bioluminescence intensity of the heterotrophic dinoflagellate Noctiluca scintillans NSDJ2010 feeding on the chlorophyte Dunaliella salina, the heterotrophic dinoflagellate Polykrikos kofoidii PKJH1607 feeding on the dinoflagellate Alexadrium minutum, and the autotrophic dinoflagellate Alexandrium mediterraneum AMYS1807. Moreover, to determine the cell volume and growth effects on bioluminescence intensity, the cell volume and growth rate of three bioluminescent dinoflagellates were simultaneously investigated. The mean 200-s-integrated bioluminescence intensity (BL) per cell, equivalent to the total bioluminescence, of N. scintillans, P. kofoidii, and A. mediterraneum was significantly affected by salinity and increased with increasing salinity from 10 to 40. The results of the present study suggest that the total bioluminescence of N. scintillans, P. kofoidii, and A. mediterraneum in offshore and oceanic waters is greater than that in estuarine waters.

Separation of Perfluorooctanoic Acid from Water Using Meso- and Macroporous Syndiotactic Polystyrene Gels.

Per- and polyfluoroalkyl substances are an emerging class of contaminants that are environmentally persistent, bioaccumulative, and noxious to human health. Among these, perfluorooctanoic acid (PFOA) molecules are widely found in ground and surface water sources. A novel high surface area, meso- and macroporous syndiotactic polystyrene (sPS) wet gel is used in this work as the adsorbent of PFOA molecules from water at environmentally relevant PFOA concentrations (≤1 μg/L) and cleanse water to below the U.S. EPA's 2023 health advisory limit of 4 parts per trillion (ppt). The sigmoidal shape of the PFOA adsorption isotherm indicates a two-step adsorption mechanism attributed to the strong affinity of PFOA molecules for the sPS surface and molecular aggregation at solid-liquid interfaces or within the pores of the sPS wet gel. The adsorption kinetics and the effects of sPS wet gel porosity, pore size, and pore volume on the removal efficiency are reported. The adsorption kinetics is seen to be strongly dependent on pore size and pore volume.

Demand Elasticities and Volume Effects: Practical Formulas for Practitioners

Demand Elasticities and Volume Effects: Practical Formulas for Practitioners

Impact of Injection-Based Delivery Parameters on Local Distribution Volume of Ethyl-Cellulose Ethanol Gel in Tissue and Tissue Mimicking Phantoms.

Local drug delivery aims to minimize systemic toxicity by preventing off-target effects; however, injection parameters influencing depot formation of injectable gels have yet to be thoroughly studied. We explored the effects of needle characteristics, injection depth, rate, volume, and polymer concentration on gel ethanol distribution in both tissue and phantoms. The polymer ethyl cellulose (EC) was added to ethanol to form an injectable gel to ablate cervical precancer and cancer. Tissue mimicking phantoms composed of 1% agarose dissolved in deionized water were used to establish overall trends between various injection parameters and the resulting gel distribution. Additional experiments were performed in excised swine cervices with a CT-imageable injectate formulation, which enabled visualization of the distribution without tissue sectioning. Needle type and injection rate had minimal impact on gel distribution, while needle depths ≥13 mm yielded significantly larger distributions. Needle gauge and EC concentration impacted injection pressure with maximum gel distribution achieved when the pressure was 70-250 kPa. Injection volumes ≤3 mL of 6% EC-ethanol minimized fluid leakage away from the injection site. Results guided the development of a speculum-compatible hand-held injector to deliver gel ethanol into the cervix. Needle depth, gauge, and polymer concentration are critical to consider when delivering injectable gels. This study addressed key questions related to the impact of injection-based parameters on gel distribution at a scale relevant to human applications including: 1) how best to deliver EC-ethanol into the cervix and 2) general insights about injection protocols relevant to the delivery of injectable gels in tissue.

Inter-Sectoral Linkages in Nigeria: Evidence from Agriculture and Manufacturing Sectors

The main purpose of the research was to establish determinants of commercial bank growth. The specific objectives of the study was to; determine the effect of default rate on loans on growth of commercial banks, determine the effect of level of interest income on growth of commercial banks and to establish the effect of forex transaction volume on growth of commercial banks listed in Nairobi Securities Exchange. The study was guided by the interest rate theory, international fisher effect theory and time preference theory. Using multiple regression analysis, we found support for the proposition that loan default rate, interest rate and forex transaction had a significant effect on growth of commercial banks. Keywords: Growth of commercial bank, default rate on loans, interest income and forex transaction volume DOI : 10.7176/DCS/9-1-06

Assessment of Masseter Volume and Postoperative Stability After Orthognathic Surgery in Patients With Skeletal Class III Malocclusion With Facial Asymmetry.

This study aimed to evaluate the effect of orthognathic surgery on masseter volume in patients with skeletal Class III malocclusion with facial asymmetry and the effect of masseter volume on stability in orthognathic surgery. This research studied 16 patients with Class III malocclusion with facial asymmetry who received combined orthodontic-orthognathic treatment and underwent craniofacial computed tomography (CT) before (T0), 2 weeks after (T1), and 6 months after (T2) surgery. Three-dimensional (3D) CT images were retrospectively analyzed, using 3D volume reconstruction to obtain the masseter volume and examine the impact of the masseter volume on stability in orthognathic surgery. A statistically significant difference (P < 0.05) in the volume of the masseter was found up to 6 months after orthognathic surgery compared with the preoperative period, and the reduction in the masticatory muscle volume on the lengthened side is greater than on the shortened side (P < 0.05). The volume of both masseters differed according to facial asymmetry, and the difference was significantly reduced after orthognathic surgery (P < 0.05). During the period time (T1-T2), cephalometric maxillary marker points were not significantly different (P > 0.05), and mandibular marker points were significantly anteriorly shifted (P < 0.05). There was an association between the masseter volume and anterior shift of point B (R > 0.5, P < 0.05), the upward and anterior shifts of the gonion point differed between the lengthened and shortened sides (P < 0.05). The size of the masseter becomes smaller 6 months after orthognathic surgery, and orthognathic surgery improves both bone and soft tissue symmetry. A larger sagittal relapse of mandibular setback occurred in patients with greater masseter volume. Considering these alterations may be helpful in planning orthognathic surgery.

Interface evolution of lithium metal anodes in all-solid-state batteries via mechanical–electrochemical investigations

All-solid-state Li metal batteries (ASSLMBs) have garnered attention owing to the high-energy density and low redox potential of Li metal anodes. However, the practical applications of ASSLMBs are hindered by issues such as the volume effect of Li anodes and Li dendrite growth. In this study, a combined method of stacking pressure analysis, interface morphology observation, and electrochemical impedance spectroscopy was used to investigate the electrochemical failure of Li symmetric batteries based on the Li6PS5Cl electrolyte at areal capacities of 0.5, 1, and 3 mAh cm−2. The results indicated that ASSLMBs with areal capacities >1 mAh cm−2 exhibited a continuous decrease in the stacking pressure. As Li dendrites/dead Li and pores/cracks increased, stacking pressure variations of >0.1 MPa per cycle and a stacking pressure change rate > 0.2 MPa h−1 were observed, indicating impending battery failure owing to interface detachment. These findings provide new insights into the interface evolution of Li anodes of ASSLMBs and emphasize the importance of electrochemical–mechanical measurements in studying Li anode interfaces of ASSLMBs.

EXPLORING THE IMPACT OF PTH THERAPY ON BONE REMODELING: A MATHEMATICAL INVESTIGATION

The regulatory influence of the parathyroid hormone (PTH) is exerted on bone, which serves as a vital reservoir of calcium within the body. While various aspects of bone growth, turnover, and mechanisms operate independently of gonadal hormones, a crucial role is assumed by sex steroids, particularly estrogen, in maintaining bone equilibrium in adults. In order to unravel the underlying mechanisms of bone remodeling mediated by PTH, a distinguished mathematical model of this intricate process is presented. Subsequently, the temporal effects of Plasma PTH and PTH external dosages are investigated using the proposed mathematical model. Among the limited repertoire of approved and accessible anabolic treatments for severe osteoporosis, daily injections of PTH stand out. This pharmaceutical marvel possesses a unique dual action, capable of acting either anabolically or catabolically, contingent upon the mode of administration. The study aims to accurately predict osteogenic responses to introduced and endogenous PTH, incorporating factors such as [Formula: see text]-[Formula: see text], [Formula: see text], and bisphosphonates in osteoblast–osteoclast signaling, as well as considering PTH’s influence on the gland and the regulatory roles of [Formula: see text], [Formula: see text], and [Formula: see text] in osteoblast apoptosis and bone volume effects. Through diverse methods including illustrative depictions, numerical simulations, sensitivity analysis, and stability analysis, this work seeks to comprehend how PTH therapy impacts bone volume, enhancing its therapeutic relevance.

Institutional Surgical Setting and Volume Effects of Certified Arthroplasty Centers in Germany: Evaluation of the Quality of Care in a 5-Year Comparison

To improve arthroplasty care quality, the EndoCert initiative focuses on structural, processual, and surgeon-related quality assurance. The aim of this study was to assess the impact of a surgeon’s case load in certified centers on quality of care, distinguished by different types of surgeons. Data from the annual reports of EndoCert certified centers for the years 2017 to 2021 were analyzed. The study revealed reduced numbers of cases, while the number of surgeons remained constant. Since 2020, the decrease in the average case load per surgeons has become more pronounced. There were also differences between senior (sECrs) and EndoCert-registered surgeons (ECrs). Before the 2020 pandemic, over half of surgeons exceeded minimum annual case requirements, while, afterwards, this number declined, especially for the ECrs. Affiliated surgeons, who are also sECrs or ECrs, performed predominantly lower numbers of arthroplasties. However, a higher percentage of affiliated surgeons in a center correlated with faster surgeries and lower mortality rates. High numbers of arthroplasties per center or surgeon were not necessarily associated with better quality indicators, especially in the knee. While the comprehensive quality standards may offset volume effects, EndoCert should reconsider minimum volume regulations based on surgeon, but also on each joint.

Contribution of the Central Corridor Transport on the Tanzanian Economic Growth

This study investigates the influence of intratrade within the Central Corridor, the effect of port cargo volume, and infrastructure expenditures on Tanzania's economy. Using quarterly data from 2001 to 2021 using the Ordinary least squares model, we found a positive relationship between cargo volume and economic growth, as well as a significant positive effect of intra-trade on the economy. However, budgetary infrastructure spending and exchange rates had insignificant impacts. The study suggests that the government  should enhance regional business ties, improve port efficiency, and support corridor infrastructure development.

Glycemic Response And Satiety in Healthy Korean Adults Following Consumption of Equal Volumes of Pressure and Non-Pressure Rice

This study examined the effect of the same volume of pressure-cooked or non-pressure-cooked rice on the glycemic response and satiety of 28 healthy Korean adults aged 20–57 years in a randomized cross-over design. On separate mornings, all participants were served with rice that was cooked either with pressure or without pressure and side dishes in a random order. The pressure-cooked rice contained approximately 14% more energy than the non-pressure-cooked rice. The capillary blood glucose response and satiety score were measured every 15 or 30 minutes for 2 hours (3 hours for satiety) before and after consuming the meal. The glucose response was not significantly different between the meals. The feelings of hunger and fullness and prospective food consumption after eating the meals were not significantly different after adjusting for age, BMI, meal order and fasting value on the given trial day. This study suggests that consuming of equal volume of pressure or non-pressure-cooked rice may make a small difference in energy intake without affecting satiety.

Can large lattice volume always facilitate ion diffusion in solids?

Large lattice volume is usually expected to expand the bottleneck size and enlarge free volume for fast Li ion transport in solids. But the universality of lattice expansion decreasing activation energy barrier for Li ion migration is still debatable. Herein, our molecular dynamics simulations and density functional theory calculations detect the unconventional phenomenon of lattice expansion increasing activation energy barrier for Li ion migration in β-Li3PS4, Li4SnS4 and Li4GeS4 sulfides with the hcp-type anion sublattice, and discover the underlying mechanism. On one hand, lattice expansion enlarges the relative energies between the octahedral and tetrahedral Li sites, and correspondingly increase activation energy barrier for tetrahedral Li ions migration along the Tet-Oct-Tet migration paths in β-Li3PS4, Li4SnS4 and Li4GeS4. On the other hand, the lattice dynamics calculations show Li energy landscapes of β-Li3PS4, Li4SnS4 and Li4GeS4 are anharmonic and enlarging lattice volume make the local minimum of Li potential energy surface flatter, simultaneously reduce the relative energy of Li occupation site, eventually resulting in the higher activation energy barrier for Li ion migration. Thus, understanding the effect of lattice volume on ion migration in solids should not only consider the factor of bottleneck size and free volume, but also combine the aspects of Li ion occupation type, Li ion migration path and anion sublattice type. These new understandings of the lattice expansion increasing activation energy barrier for ion migration would further promote the further optimization and rational design of superionic conductors by element doping or strain engineering.

The Additional Role of F18-FDG PET/CT in Characterizing MRI-Diagnosed Tumor Deposits in Locally Advanced Rectal Cancer.

Rationale: F18-FDG PET/CT may be helpful in baseline staging of patients with high-risk LARC presenting with vascular tumor deposits (TDs), in addition to standard pelvic MRI and CT staging. Methods: All patients with locally advanced rectal cancer that had TDs on their baseline MRI of the pelvis and had a baseline F18-FDG PET/CT between May 2016 and December 2020 were included in this retrospective study. TDs as well as lymph nodes identified on pelvic MRI were correlated to the corresponding nodular structures on a standard F18-FDG PET/CT, including measurements of nodular SUVmax and SUVmean. In addition, the effects of partial volume and spill-in on SUV measurements were studied. Results: A total number of 62 patients were included, in which 198 TDs were identified as well as 106 lymph nodes (both normal and metastatic). After ruling out partial volume effects and spill-in, 23 nodular structures remained that allowed for reliable measurement of SUVmax: 19 TDs and 4 LNs. The median SUVmax between TDs and LNs was not significantly different (p = 0.096): 4.6 (range 0.8 to 11.3) versus 2.8 (range 1.9 to 3.9). For the median SUVmean, there was a trend towards a significant difference (p = 0.08): 3.9 (range 0.7 to 7.8) versus 2.3 (range 1.5 to 3.4). Most nodular structures showing either an SUVmax or SUVmean ≥ 4 were characterized as TDs on MRI, while only two were characterized as LNs. Conclusions: SUV measurements may help in separating TDs from lymph node metastases or normal lymph nodes in patients with high-risk LARC.

Techno-economic assessment of biopolymer production from methane and volatile fatty acids: effect of the reactor size and biomass concentration on the poly(3-hydroxybutyrate-co-3-hydroxyvalerate) selling price

Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) is a biobased and biodegradable polymer that could efficiently replace fossil-based plastics. However, its widespread deployment is slowed down by the high production cost. In this work, the techno-economic assessment of the process for producing poly(3-hydroxybutyrate-co-3-hydroxyvalerate) from low-cost substrates, such as methane and valeric acid derived from the anaerobic digestion of organic wastes, is proposed. Several strategies for cost abatement, such as the use of a mixed consortium and a line for reagent recycling during downstream, were adopted. Different scenarios in terms of production, from 100 to 100,000 t/y, were analysed, and, for each case, the effect of the reactor volume (small, medium and large size) on the selling price was assessed. In addition, the effect of biomass concentration was also considered. Results show that the selling price of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) is minimum for a production plant with 100,000 t/y capacity, accounting for 18.4 €/kg, and highly influenced by the biomass concentration since it can be reduced up to 8.6 €/kg by increasing the total suspended solids from 5 to 30 g/L, This adjustment aligns the breakeven point of PHBV with the reported average commercial price.

A Quasi-3D theory for bending, vibration and buckling analysis of FG-CNTRC and GPLRC curved beams

This paper proposes a finite element model based on Quasi-3D theory, which includes both normal and shear effects, to study the bending, vibration, and buckling responses of FG-CNTRC and GPLRC curved beams. A two-node beam element satisfying C1 continuity requirement is utilized to compute displacements, critical buckling loads, and natural frequencies for beams with various boundary conditions. To evaluate the precision of the suggested model, various numerical examples are conducted. Next, a comprehensive parameter study is carried out to study the effects of distribution patterns and fractional volume of reinforced materials, open angles, aspect ratios, and boundary conditions. Numerous numerical results can serve as benchmarks for subsequent investigations.

Adipose tissue in the small airways: How much is enough to drive functional changes?

Obesity is a contributing factor to asthma severity; while it has long been understood that obesity is related to greater asthma burden, the mechanisms though which this occurs have not been fully elucidated. One common explanation is that obesity mechanically reduces lung volume through accumulation of adipose tissue external to the thoracic cavity. However, it has been recently demonstrated that there is substantial adipose tissue within the airway wall itself, and that the presence of adipose tissue within the airway wall is related to body mass index. This suggests the possibility of an additional mechanism by which obesity may worsen asthma, namely by altering the behaviour of the airways themselves. To this end, we modify Anafi & Wilson’s classic model of the bistable terminal airway to incorporate adipose tissue within the airway wall in order to answer the question of how much adipose tissue would be required in order to drive substantive functional changes. This analysis suggests that adipose tissue within the airway wall on the order of 1%–2% of total airway cross-sectional area could be sufficient to drive meaningful changes, and further that these changes may interact with volume effects to magnify the overall burden.

Comparison of Supervised versus Self-Administered Stretching on Bench Press Maximal Strength and Force Development.

While there is reported superior effectiveness with supervised training, it usually requires specialized exercise facilities and instructors. It is reported in the literature that high-volume stretching improves pectoralis muscles strength under supervised conditions while practical relevance is discussed. Therefore, the study objective was to compare the effects of volume equated, supervised- and self-administered home-based stretching on strength performance. Sixty-three recreational participants were equally assigned to either a supervised static stretching, home-based stretching, or control group. The effects of 15 min pectoralis stretching, 4 days per week for 8 weeks, were assessed on dynamic and isometric bench press strength and force development. While there was a large magnitude maximal strength increase (p < 0.001-0.023, ƞ2 = 0.118-0.351), force development remained unaffected. Dynamic maximal strength in both groups demonstrated large magnitude increases compared to the control group (p < 0.001-0.001, d = 1.227-0.905). No differences between the intervention group for maximal strength (p = 0.518-0.821, d = 0.101-0.322) could be detected. The results could potentially be attributed to stretch-induced tension (mechanical overload) with subsequent anabolic adaptations, and alternative explanatory approaches are discussed. Nevertheless, home-based stretching seems a practical alternative to supervised training with potential meaningful applications in different settings.

Spectral-temporal traits in Sentinel-1 C-band SAR and Sentinel-2 multispectral remote sensing time series for 61 tree species in Central Europe

Tree species maps derived from satellite imagery increasingly support forest administrations and nature conservation authorities with large-scale and up-to-date information. However, many species are often excluded or aggregated in classification tasks due to a limited knowledge of the most suitable predictors. Our study aims to gain a better understanding of optical and polarimetric traits for tree species mapping by examining Sentinel-1 and Sentinel-2 time series from 61 tree species in temperate Europe. For a selection of 32 optical, polarimetric and structural variables, the principal component analysis revealed that Sentinel-2 variables mainly explain the variance in the data by contributing to the “seasonality” and “foliage color” components. Sentinel-1 contribute most to the “texture” component. The Normalized Difference Vegetation Index (NDVI), Tasseled Cap Greenness (TCG) and Radar Vegetation Index (RVI) were chosen as key variables for further analysis. Seasonality was found to be the most dominant aspect in all vegetation indices. Furthermore, the TCG was found to be useful to distinguish between early and late budding species. The RVI showed a large potential to discriminate conifers, which is attributed to the crown volume effect of C-band SAR. Using exploratory data analysis, we further examined the influence of management, biogeographical and meteorological factors on the time series from Fagus sylvatica, Pinus sylvestris, and Picea abies. The NDVI and TCG are relatively robust to different conditions. For the two conifer species however, we found strong spatial variations of the RVI which are presumably caused by different crown conditions across the study area. Using Sentinel-1 data could therefore lead to uncertainties in tree species mapping across large biogeographical gradients. This study contributes to the improvement of tree species mapping based on optical and dual-polarimetric data and thus benefits forest authorities and other stakeholders in their monitoring tasks and decision-making.

Adverse respiratory patterns in near-term spontaneously breathing newborn lambs with elevated airway liquid volumes at birth.

Recent evidence indicates that respiratory distress (RD) in near-term infants is caused by elevated airway liquid (EL) volume at the beginning of air-breathing after birth. While the adverse effects EL volumes on newborn lung function are known, the effects on respiratory control and breathing patterns shortly after birth (<4 h) are unknown. We investigated the effects of EL volumes on cardiorespiratory function and breathing patterns in spontaneously breathing near-term newborn lambs in the first hours after birth. At 137-8 days gestation (2-3 days prior to delivery; term ∼147 days), sterile surgery was performed on fetal sheep (n = 17) to implant catheters and blood flow probes. At 140 days, lambs were delivered via caesarean section under spinal anaesthesia. Airway liquid volumes were adjusted to mimic the level expected following vaginal delivery (∼10 ml/kg; Controls; n = 7), or elective caesarean section (∼30 ml/kg; elevated airway liquid group; EL; n = 10). Spontaneous breathing and cardiorespiratory parameters were recorded over four hours after birth. Non-invasive respiratory support with supplemental oxygen was provided if required. EL lambs required higher inspired oxygen levels (p = 0.0002), were less active (p = 0.026), fed less (p = 0.008) and had higher respiratory morbidity scores than Controls (p < 0.0001). EL lambs also displayed higher rates of breathing patterns associated with RD, such as expiratory braking and tachypnoea. These patterns were particularly evident in male EL lambs who displayed higher levels of severe respiratory morbidity (e.g., expiratory braking) than female EL lambs. The study demonstrates that EL volumes at birth trigger respiratory behaviour and breathing patterns that resemble clinically recognised features of RD in term infants.

Analysis of Three Dimethyl Sulfides in Freshwater Lakes Using Headspace Solid-Phase Microextraction-Gas Chromatography with Flame Photometric Detection

Dimethyl sulfides are ubiquitous odorous substances in eutrophic freshwater bodies. In this study, a simple headspace solid-phase microextraction-gas chromatography-flame photometric detection method was developed to detect three representative algal-derived dimethyl sulfides in freshwater lake water samples: dimethyl monosulfide (DMS), dimethyl disulfide (DMDS), and dimethyl trisulfide (DMTS). The effects of extraction fiber, temperature, pH, ionic strength, and sample volume were investigated orthogonally, and the optimized method was applied to analyze surface water samples from Lake Ulansuhai in Inner Mongolia, China. Optimal extraction was obtained with a 50/30 µm DVB/CAR/PDMS extraction fiber, 20% ion concentration, 87 min extraction time, and 50 °C extraction temperature. The correlation coefficients of the standardized working curves for DMS, DMDS, and DMTS were 0.9967, 0.9907, and 0.9994, respectively, indicating good linear relationships. Limits of detection were in the nanogram range, and the recoveries of the spiked standards for DMS, DMDS, and DMTS were 97.22~99.07%, 93.39~99.34%, and 91.17~99.25%, with relative standard deviations of 5.18~5.94%, 3.08~6.25%, and 2.56~5.47%, respectively. This method is stable and reliable, and can be used for the determination of volatile sulfides in freshwater lake water.