Effective Mass Research Articles

A nearly complete treatment of the effect of non-adiabaticity on rovibrational energies of H3+ (Part III).

In this article, significant contributions of non-adiabaticity for the rovibrational bound states up to 25 000 cm-1 and total angular momentum J = 0-20 of H3+ are investigated. A coupled-perturbed full configuration interaction (CP-FCI) treatment is applied to calculate all couplings between electronic states caused by the nuclear motion. These derivative couplings were evaluated up to the second order by means of a perturbation treatment and include all nuclear Cartesian first and second derivatives of the electronic wavefunctions. In particular, the coupling of special derivatives with respect to r and R in the Jacobi coordinate representation is more significant than thought. The perturbation approach is especially optimal for the treatment of weak non-adiabaticity in case of rovibrational energies in H3+ and had not been available before for H3+ or other triatomics. Using exclusively Gaussian basis functions for CP-FCI appears to be sufficient, because explicit correlated wavefunctions are already used for all other potential energy contributions. Our work is an extension of earlier non-adiabatic investigations based on first derivative couplings of electronic states that led to the concept of geometry-dependent effective nuclear masses and which needs only a single potential energy surface for the dynamics. The implementation allows us to include all non-adiabatic effects up to the order of O(μ-2), μ being the reduced nuclear mass. Our treatment works for any isotopologue and for the whole potential energy curve or surface. By this treatment, a further reduction in deviations to experimental data for most rovibrational levels to less than 0.1 cm-1 is possible. For the related transition frequencies, 1366 of 1720 known rovibrational transitions in H3+ have deviations less than 0.1 cm-1 without using any empirically adjustable parameters or optimizing the nuclear mass for a specific transition. For many questionable assignments (deviations >0.3 cm-1) of observed transitions in H3+, a new labeling is proposed.

Path analysis reveals combined winter climate and pollution effects on the survival of a marine top predator.

Marine ecosystems are experiencing growing pressure from multiple threats caused by human activities, with far-reaching consequences for marine food webs. Determining the effects of multiple stressors is complex, in part, as they can affect different aspects of biological organisation (behaviour, individual traits and demographic rates). Determining the combined effects of stressors, through different biological pathways, is key to predict the consequences for the viability of populations threatened by global change. Due to their position in the food chain, top predators such as seabirds are considered more sensitive to environmental changes. Climate change is affecting the prey resources available for seabirds, through bottom-up effects, while organic pollutants can bioaccumulate in food chains with the greatest impacts on top predators. However, knowledge of their combined effects on population dynamics is scarce. Using a path analysis, we quantify the effects of climate change and pollution on the survival of adult great black-backed gulls, both directly and through effects of individuals' body mass. Warmer ocean temperatures in gulls' winter foraging areas in the North Sea were correlated with higher survival, potentially explained by shifts in prey availability associated with global climate change. We also found support for indirect negative effects of organochlorines, highly toxic pollutants to seabirds, on survival, which acted, in part, through a negative effect on body mass. The results from this path analysis highlight how, even for such long-lived species where variance in survival tends to be limited, two stressors still have had a marked influence on adult survival and illustrate the potential of path models to improve predictions of population variability under multiple stressors.

Neutrino phenomenology in the modular S3 seesaw model

We have studied neutrino phenomenology in the supersymmetric type-I seesaw model endowed with the Γ2≃S3 modular symmetry. We have identified different realizations of the S3 modular symmetry, referred to as models A, B, C, and D. The four models are compatible with neutrino mass being inverted ordering (IO). Moreover, models A, B, and D can also accommodate normal ordering (NO) neutrino masses. We identify parameter space for each model compatible with neutrino oscillation at the 2−σ level. We then proceed to study the neutrino phenomenology of each model. We find that the lightest neutrino mass can be as light as 0.64 meV in the case of NO in model A and 50 meV in the case of IO in model D. The smallest effective electron neutrino mass attainable in our analysis is 8.8 meV in the case of NO (model A) and 50 meV for IO (model D). Finally, we note that the effective Majorana mass can be as small as 0.33 meV in the case of NO (model A) and 22 meV for IO (model D). Published by the American Physical Society 2024

Triaxial strain enhanced thermoelectric performance and conversion efficiency in Tl3TaSe4

Thermoelectric (TE) materials have garnered significant attention due to their potential in converting waste heat into useful electrical energy. Strain engineering has emerged as a promising strategy for tailoring the properties of materials, offering opportunities to optimize TE performance. In this study, we employ first-principles calculations to investigate the electronic and thermal transport properties of cubic Tl3TaSe4 under triaxial strain. Our results demonstrate that tensile strain can reduce the effective mass of carriers and contribute to high carrier mobility. The phonon calculation and AIMD simulation reveal excellent dynamic stability and thermal stability of Tl3TaSe4 both with and without strain. The red shift phenomenon of phonon vibration modes and the higher portion of phonon DOS in the low frequency region indicate that tensile strain enhances the anharmonicity of Tl3TaSe4. In addition, triaxial tensile strain can effectively reduce the heat capacity, group velocity, and phonon lifetime, while enhancing the anharmonicity of Tl3TaSe4, which contributes to the lower κl. Compared to the condition without strain, the room temperature κl of Tl3TaSe4 under 1 % and 2 % tensile strain is reduced by about 43 % and 79 %, respectively. Furthermore, the tensile strain exhibits a positive enhancement effect on the ZT value of Tl3TaSe4. At 700 K, the optimal ZT values of p-type and n-type Tl3TaSe4 under 2 % tensile strain are 1.31 and 0.94, respectively, which are three times higher than that of 0.4 and 0.33 without strain. Finally, the TE conversion efficiency of Tl3TaSe4 under 2 % tensile strain is 6.8 %, which is higher than BiCuSeO and α-Cu2+xSe, and comparable to SnSe. Our results demonstrate the effectiveness of triaxial tensile strain in enhancing the phonon scattering, reducing the κl, and improving the TE properties of Tl3TaSe4.

Effective photon mass in the presence of a gravity gradient emulated by an electromagnetic medium

Geometry- and gravity-induced effective photon mass is known to arise in many cases, such as various optical waveguides, Kaluza–Klein theories, and many other optical and general relativity situations. Here we study the appearance of effective photon mass in the Newtonian limit due to the presence of a gravity gradient emulated by an electromagnetic medium. The effective photon mass squared appears to be proportional to the local gravity gradient, and it becomes negative in an optical anti-waveguide around the unstable equilibrium location. A similar effect is observed in the emulated Kottler–Møller spacetime where the absolute value of the gravity-induced effective photon mass appears to coincide with the Unruh temperature. We demonstrate that similar to the Unruh effect, a bath of thermal radiation should be observed in an optical anti-waveguide near the unstable equilibrium, whose temperature is defined by the emulated local gravity gradient, and which remains unchanged in the c→∞ limit.

Effects of hydrostatic pressure, temperature, and position-dependent mass on the nonlinear optical properties of triple delta-doped GaAs quantum well

In this study, we thoroughly investigate the impacts of hydrostatic pressure, temperature, and position-dependent mass (PDM) on the nonlinear optical properties of asymmetric triple δ-doped GaAs quantum wells. Our analysis covers total optical absorption coefficients, relative refractive index changes, nonlinear optical rectification, second harmonic generation, and third harmonic generation. Initially, we employ PDM to solve the time-independent Schrödinger equation using the diagonalization method under effective mass and parabolic band approaches, considering pressure and temperature dependencies. Utilizing the first four energy eigenvalues and eigenfunctions, we apply the compact density matrix method to compute the system’s nonlinear optical properties numerically. The results indicate a shift in optical property peak positions toward lower (higher) energy spectra with increasing hydrostatic pressure (temperature). Furthermore, the influence of PDM shifts the system’s optical properties toward the higher energy spectrum, resembling the effect of temperature. From an experimental and theoretical perspective, one of the topics that researchers work on most is GaAs-based δ-doped systems (δ-doped heterojunction bipolar transistors, δ-doped field effect transistors, δ-multiple independent gate field effect transistors, etc.). We believe these findings will provide valuable insights for the researchers involved in GaAs-based δ-doped optoelectronic device design.

Seismic response of column‐supported silos considering granular–structure interaction

AbstractTo predict the seismic response of column‐supported silos (CSSs), the granular–structure interaction (GSI) analysis method is proposed with considering the combined effect of the friction between the particles–particles and the particles–silo wall. Using free‐body dynamic equilibrium equations, we reconstruct the mutual interactions between different grain portions and between the grains and the silo wall to develop the ideal calculation model of the CSS structure. Based on the analysis model, additional dynamic overpressure and the effective mass caused by the stored content interacting with the silo wall is obtained with different slenderness ratios and peak accelerations. The additional bending moment caused by the friction between the particles and silo wall is further quantified. To verify the reliability of the proposed method, we discuss some applicative examples by comparing the GSI method with other theories, Eurocode 8, and experimental results. Moreover, the along‐the‐height acceleration profiles of the silo wall and the ensiled content are analyzed according to the shaking‐table tests. The results show that the GSI method can match Janssen's theory well in the case of static pressure at slenderness ratios exceeding 1.0. The overpressure profiles along the height of the silo wall follow a nonlinear distribution, different from Eurocode 8. The bending moment obtained by predictive formulas agrees well with the experimental results for the CSS, indicating that the GSI method is reasonable. Some design and construction recommendations, including the maximum overpressure position, the reference range of the dynamic overpressure coefficient, and the reduction factors of the ensiled content mass, are proposed to facilitate the engineering applications of CSSs, considering different slenderness ratios.

The influence of air masses on human mortality in the contiguous United States.

Temperature-related mortality is the leading cause of weather-related deaths in the United States. Herein, we explore the effect of air masses (AMs) - a relatively novel and holistic measure of environmental conditions - on human mortality across 61 cities in the United States. Geographic and seasonal differences in the effects of each AM on deseasonalized and detrended anomalous lagged mortality are examined using simple descriptive statistics, one-way analyses of variance, relative risks of excess mortality, and regression-based artificial neural network (ANN) models. Results show that AMs are significantly related to anomalous mortality in most US cities, and in most seasons. Of note, two of the three cool AMs (Cool and Dry-Cool) each show a strong, but delayed mortality response in all seasons, with peak mortality 2 to 4days after they occur, with the Dry-Cool AM having nearly a 15% increased risk of excess mortality. Humid-Warm (HW) air masses are associated with increases in deaths in all seasons 0 to 1days after they occur. In most seasons, these near-term mortality increases are offset by reduced mortality for 1-2weeks afterwards; however, in summer, no such reduction is noted. The Warm and Dry-Warm AMs show slightly longer periods of increased mortality, albeit slightly less intensely as compared with HW, but with a similar lag structure by season. Meanwhile, the most seasonally consistent results are with transitional weather, whereby passing cold fronts are associated with a significant decrease in mortality 1day after they occur, while warm fronts are associated with significant increases in mortality at that same lag time. Finally, ANN modeling reveals that AM-mortality relationships gleaned from a combined meta-analysis can actually lead to more skillful modeling of these relationships than models trained on some individual cities, especially in the cities where such relationships might be masked due to low average daily mortality.

Influence of material and geometry parameters on resonance linewidths of plasmonic modes in gratings made from highly doped Ge1− x Sn x

Highly doped group IV semiconductors such as Ge or GeSn are promising candidates for plasmonic mid infrared applications. The lower effective mass of GeSn alloys in comparison to pure Ge can result in lower plasma wavelengths and extend the application wavelength range. Devices made from doped GeSn alloys, therefore, are one interesting route towards plasmonic applications in the mid-infrared wavelength range, possibly extending to the NIR. Here, we specifically explore how spectrally narrow plasmonic resonances can be obtained in comb-like grating antennas by combining aspects of material growth with geometry optimization. We investigate both in simulation and in experiment how the interplay of localised surface plasmon resonances and Rayleigh anomalies can be tuned to achieve narrow extinction peaks originating from the resulting surface lattice resonances generated in our antennas made from highly doped Ge1−x Sn x .

Dalitz-plot analysis of B±→K±K+K− decays

We study B±→K±K+K− decays using the QCD factorization model with final state interactions between K+ and K− mesons taken into account. The parameters of the model are fitted to the data of the and LHCb collaborations. We describe the KK¯ effective mass distributions and examine the CP-violating asymmetry effects in the full range of the Dalitz plot. Published by the American Physical Society 2024

Pituitary Apoplexy: a re-appraisal of risk factors and best management strategies in the COVID-19 era.

Pituitary apoplexy (PA) is a clinical syndrome caused by acute hemorrhage and/or infarction of the pituitary gland, most commonly in the setting of a pituitary macroadenoma. PA generally presents with severe headache, nausea, vomiting, visual disturbance, and, in more severe cases, altered mental status. Many factors have been attributed to the risk of developing PA, including most recently, numerous reports showcasing an association with COVID-19 infection or vaccination. Initial management of PA includes evaluation and correction of deficient hormones and electrolytes and an assessment if surgical decompression to relieve pressure on optic nerves and other brain structures is needed. While prompt recognition and treatment are crucial to avoid morbidity and mortality, in the modern era, PA is less commonly considered a true neurosurgical emergency requiring immediate (< 24h) surgical decompression. Traditionally, surgical decompression has been the standard of care for significant mass effects. However, several studies have shown similar outcomes in visual and hormonal recovery with either surgical decompression or conservative medical management. Unfortunately, most evidence on optimal management strategies is limited to retrospective case series, small prospective studies, and one multi-center observational study. This review aims to provide the most up-to-date evidence on the role of COVID-19 in PA and best management strategies.

Simultaneous Bulk‐Rock Elemental and Boron Isotope Ratio Measurement Using LA‐ICP‐MS on Silicate Micro‐Particulate Pellets

We have established a method for the simultaneous measurement of element abundances and boron isotopic compositions of bulk‐rock silicate samples by laser ablation coupled to two different ICP‐MS instruments. Fifteen silicate reference materials were prepared as micro‐particulate pressed powder pellets (MP) for analysis. Approximately 1/5th of the ablated material was transported to a single‐collector ICP‐MS for elemental measurement, while 4/5ths were sent to a multi‐collector ICP‐MS for boron isotope ratio measurement. Compositions of different milling materials (agate, zirconium oxide, tungsten carbide, sintered corundum and silicon nitride) were measured for the evaluation of potential contamination during sample preparation. Determined element mass fractions are in agreement with literature values within ±20%. For boron isotope ratios, the matrix‐dependent background elevation across the m/z from 9.9 to 11, and the effect of ablation mass was quantified. Measured δ11B values of most reference materials are consistent with literature values within ±1‰. The intermediate measurement precision is ±0.3‰ for JB‐2 with 30 μg g−1 B and ±0.4‰ for JA‐2 with 21 μg g−1 B. A publically available, web‐based streamlit app was developed for data processing (https://zenodo.org/doi/10.5281/zenodo.11150471). This paves the way for combined, accurate and precise elemental and boron isotope ratio measurements of geological materials.

Theoretical investigation of optoelectronic properties in PbS/CdS core/shell spherical quantum dots under the effect of the electric field intensity, hydrogenic impurity and geometric parameters

In this paper, we theoretically investigated the combined effects of the external electric field (EF) strength and the geometric parameters on the linear, nonlinear and total dielectric functions as well as the effective dielectric function (DF) coefficients of PbS/CdS spherical core/shell quantum dots (CSQD) in the presence of the hydrogenic impurity located at the center. The subband energy eigenvalues and their corresponding wave functions are obtained by solving the time-independent Schrödinger equation and using the variational method (VM) in the framework of the effective mass approximation (EMA). The linear, nonlinear and total DF as well as the effective DF were discussed and evaluated under the influence of EF intensity, geometric parameters, the change of the number of quantum dots (QDs) per unit volume and optical intensity I based on the compact density matrix (CDM) approach. The obtained results show that the height peaks of the linear, nonlinear and Total DF as well as the effective DF coefficients increase and their resonant peak moves towards lower energies as the EF and geometric factors increase in both cases with and without considering the hydrogenic impurity effect. Furthermore, our findings show that the impact of optical intensity and the number of QDs per unit volume does not change the resonance peaks of imaginary parts of DF and effective DF but decreases their magnitudes. As a result, we believe that numerical results will present important developments and provide great contributions in designing new optoelectronic devices related to CSQD hetero-nanostructure.

Subdural empyema—a rare complication of chronic otitis media: a case report

BackgroundSubdural empyema is an extremely rare and fatal intracranial complication of chronic otitis media. Due to its rarity and vague symptoms, it is often diagnosed late if not completely missed; specially in developing countries where the diagnostic modalities are hardly available or accessible. To the best knowledge of the authors, this is a preliminary reported case of subdural empyema as a complication of chronic otitis media in Eritrea. It aims to provide vital information on the clinical presentation, preferred diagnostic modalities, and the proper management of such cases.Case reportAn 8 years old female patient from the Rashaida ethnic group presented with fever, right ear purulent discharge, right post-auricular swelling, and altered mental status. Prior to her admission, she had history of recurrent purulent discharge from her right ear for almost 2 years, and had been diagnosed with chronic otitis media. Upon admission her GCS was 13/15 which later on deteriorated to be 3/15 on day 3. MRI was done and showed a right fronto-tempo-parietal subdural empyema with mass effect, shifting the midline to the left. She was immediately started on empirical broad-spectrum antibiotics. After the diagnosis was made, craniotomy was done, and 30 ml of pus was removed from the subdural space. Culture and sensitivity of the pus obtained intraoperatively was done but produced no yield. Hence, she was continued on the empirically started antibiotics. The patient’s condition was well improved by post-operative day 4.ConclusionIt is important to have a high index of suspicion of intracranial complications in patients with history of chronic otitis media or other otologic complaints, who present with neurologic manifestations. Subdural empyema still being uncommon even among the intracranial complications of COM, it is often missed. Hence, timely diagnosis with MRI, immediate surgical evacuation of the empyema along with the prolonged administration of broad-spectrum antibiotics is highly recommended.

Engineering of active site coupling to facilitate interatomic charge transfer for bifunctional oxygen electrocatalysis

Interatomic charge transfer emerges as a robust technique for enhancing catalytic efficacy in key energy reactions, specifically the oxygen reduction reaction (ORR) and oxygen evolution reaction (OER). Despite its potential, advancing simultaneous improvements in reversible oxygen catalysis pose considerable challenges. Herein, we detailed an active site coupling engineering method to create a CoCu@NSC bifunctional oxygen electrode. In this configuration, OER-active Cu sites were alloyed with ORR-active Co within a N/S-doping carbon nanobox. This arrangement yielded a half-wave potential of 0.924 V for ORR, alongside an overpotential of η10 = 356 mV for OER. The fabricated CoCu@NSC cathode yielded a discharge capacity of 768 mAh/gZn, a peak power density of 295 mW/cm2, and extensive cycling durability. Work function assessments indicated that the chemical integration of Co and Cu components at the atomic level promoted interfacial charge redistribution, effectively optimizing the adsorption-desorption dynamics of intermediates at the active sites, thereby substantially enhancing the catalytic performance for both OER and ORR. Additionally, doping with N/S species enhanced the conductivity of the hollow carbon matrix, facilitating more effective mass and charge transport pathways. These insights illuminate a compelling approach for the design and synthesis of effective bifunctional oxygen electrodes that is pivotal for advanced energy storage advice.

Systematic investigation on the rational design and optimization of bi-based metal oxide semiconductors in photocatalytic applications

To address the global energy shortage and mitigate greenhouse gas emissions on a massive scale, it is critical to explore novel and efficient photocatalysts for the utilization of renewable resources. Bi-based metal oxide (Bi x MO y ) semiconductors composed of bismuth, transition metal, and oxygen atoms have demonstrated improved photocatalytic activity and product selectivity. The vast number of element combinations available for Bi x MO y materials provides a huge compositional space for the rational design and isolation of promising photocatalysts for specific applications. In this study, we have systematically investigated the electronic and optical properties over Bi2O3 and a series of selected Bi x MO y group materials (BiVO4, BiFeO3, BiCoO3, and BiCrO3) by calculating band structure, basic optical property features, mobility and separation of charge carriers. It is clearly noted that the band gap and band edge position of the Bi x MO y group materials can be tuned in a wide range in comparison to Bi2O3. Similarly, the light response of Bi x MO y also can be broadened from the ultraviolet to the visible light region by adjusting the selection of transition metals. Additionally, the analysis of the effective mass of charge carriers of these materials further confirms their possibility in photocatalytic reaction applications because of the appropriate separation efficiency and mobility of carriers. A selection of experimental investigations on the crystal structure, composition, and optical properties of Bi2O3, BiVO4, and BiFeO3 as well as their catalytic performance in the degradation of methylene blue over was also conducted, which agree well with the theoretical predictions.

Ultra-high electron mobility in Sn-doped two-dimensional Ga2O3 modified by biaxial strain and electric field

2D Ga2O3 exhibits overwhelming advantages over its bulk counterpart, whereas manipulating the carriers is rare. We report strain-dependent electronic structures and transport properties of Sn-doped 2D Ga2O3 using first-principles calculations with deformation potential theory. The band gaps are tunable from 2.23 eV to 1.20 eV due to the strain-mediated σ* anti-bonding and π bonding state variations. Specifically, ultra-high electron mobility of 22579.32 cm2V−1s−1 is predicated under 8% tensile. Further electric field modulations suggest the retaining of band gap and effective mass. These results highlight its property manipulations and nanoscale electronic applications.

Enhanced Thermoelectric Properties for Eco-friendly CaTiO3 by Band Sharpening and Atomic-Scale Defect Phonon Scattering

CaTiO3-based compounds have emerged as a promising thermoelectric material, renowned for their environmentally benign, thermally stable, and cost-efficient merits. Nonetheless, the pristine CaTiO3 manifests inherently low electronic transport properties. Herein, the thermoelectric properties of Ca1-xDyxTiO3 (x = 0, 0.05, 0.10, 0.15, 0.20) compounds are systematically investigated. The electrical transport properties are markedly enhanced by synergistic optimization of the carrier concentration, mobility, and density-of-states effective mass. Density functional theory (DFT) results demonstrate that the conduction band tends to sharper and the lighter band participates in carrier transport after Dy doping. The large discrepancy in atomic mass results in considerable mass fluctuations, which give rise to intense phonon scattering. Benefitting from the modulated band structure and reduced thermal conductivity, the highest ZT of 0.31 is achieved at 1073 K, enhanced by 287.5% in contrast with pristine CaTiO3 (ZTmax = 0.08). The defect and energy band modulation strategies proposed to optimize thermoelectric performance are applicable to other thermoelectric materials. This investigation inspires the exploration of high-performance and eco-friendly high temperature thermoelectric material.

Room temperature synthesis of a chiral covalent organic framework core-shell composite for high-performance liquid chromatography enantioseparation.

In this article, chiral covalent organic framework core-shell composite CCOF-TpPa-Py@SiO2 was facilely synthesized by induction at room temperature. The CCOF-TpPa-Py@SiO2 core-shell composite was used as a chiral stationary phase for the separation of the racemates by high-performance liquid chromatography, which exhibits good separation performance for chiral compounds including ketones, alcohols, esters, epoxides, carboxylic acids, amides, and amines. The effects of analyte injection mass on the enantioseparation were studied. The reproducibility and stability of the CCOF-TpPa-Py@SiO2 chiral column were explored. The intra-day (n=5), inter-day (n=5), and inter-column (n=3) relative standard deviations for the migration times and resolution of benzoin were 0.32%-0.54%, 0.45%-0.61%, and 1.21%-1.53%, respectively. In addition, the chiral separation ability of the CCOF-TpPa-Py@SiO2 chiral column (column A) was compared with that of the MDI-β-CD-Modified COF@SiO2 (column B) as well as a commercial chiral column (Chiralpak AD-H). The chiral recognition ability of column A is complementary to that of column B and AD-H column. The resolution mechanism of CCOF-TpPa-Py@SiO2 stationary phase towards chiral analyte was explored. Hence, the synthesis of CCOF-TpPa-Py@SiO2 core-shell composite by induction at room temperature as chiral stationary phases for chromatographic separation has important research potential and application prospects.

The combined effects of electric field and embedded dielectric matrix on the electronic and optical properties in Ge/SiGe core/shell quantum dots and its SiGe/Ge inverted structure

In this study, the binding energy (BE) and photoionization cross-section (PICS) coefficients in a Ge/Si0.15Ge 0.85 core/shell quantum dots (CSQDs) and in its inverted structure Si0.15Ge0.85 / Ge (ICSQDs) are studied. The influence of the hydrogenic impurity and capped matrix are taken into account. The electronic states and their related eigenfunctions are computed by solving the three-dimensional Schrödinger equation under the framework of the effective mass approximation (E.M.A) using the variational dimensional. The influence of the core radius and electric field strength on the BE and PICS are investigated. The numerical results reveal that the optoelectronic properties are considerably affected by the electric field strength (EF), immersed oxide matrix (OM) and geometric parameter. The obtained results prove that the PICS magnitude increases as the core radius increases and its resonant peak moves towards the lower energies for Ge/Si0.15Ge0.85 CSQDs structure, and increases as the core radius decreases and its resonant peak experiences a blue shift with increasing core radius for Si0.15Ge 0.85/ Ge ICSQDs. Moreover, with the effects of the surrounding oxide matrix and electric field strength, the PICS magnitude is improved and their resonant peak suffers a redshift.