Effective Mass Research Articles

Spectroscopic ellipsometry investigation of a 6H-SiC single crystal plate for potential use in graphene optoelectronic devices

At room temperature, the spectroscopic ellipsometry SE parameters Epsi (ψ) and Delta (Δ) for 6H-SiC crystal substrate were measured in the wavelength range 350-1700nm at four different angles of incidence, 60o, 65o, 70o, and 75o. An SE model was developed to extract optical consents of 6H-SiC crystal substrate from the experimentally measured SE parameters. In the wavelength range 350-1700 nm, the refractive index of the 6H-SiC crystal substrate was extracted and fitted to two terms of the Sellmeier dispersion function. In the wide spectral range (350-1700 nm), the Wemple-DiDomenico (WDD) dispersion model shows how the real refractive index changes with wavelength. The analysis of refractive index dispersion of the 6H-SiC crystal substrate using Sellmeier dispersion function and WDD optical model allows to extract oscillator strength Nfij, average oscillator energy Eo, dispersion energy of the single oscillator Ed, lattice oscillator strength El, Abbe dispersion number, energy gap Eg, density of valence electrons nv, refractive index at infinite wavelength n∞, lattice dielectric constant εL, the ratio of free carrier density to free carrier effective mass (N/m*), and plasma frequency ωp. For the 6H-SiC crystal substrate, in the desired spectral range (240–1700 nm), it does not have any depolarization effect on the reflected polarized light.

Fat mass mediating effect on the association of worsening insulin resistance with increased left ventricular mass in 1595 adolescents: a 7-Year Longitudinal and Mediation Study

Abstract Background Fat mass-insulin resistance vicious cycle has been established in the young population and late adolescence has been identified as the critical time when the pathologic cycle begins. However, the independent and synergistic effect of fat mass in the relationship of insulin resistance with cardiac structure remains unexamined in a large cohort of adolescents, possibly due to the scarcity of repeated echocardiography measures. Mounting effective prevention strategies relies on strong evidence of the timing of the earliest cardiovascular alteration induced by insulin resistance. Purpose To investigate the longitudinal association of insulin resistance with left ventricular mass (LVM) and the mediating effect of fat mass in adolescents. Methods From the Avon Longitudinal Study of Parents and Children (ALSPAC), UK birth cohort, 1595 adolescents aged 17 years who had fasting glucose and insulin measured at 17- and 24-year clinic visits were included. Homeostatic model assessment for insulin resistance (HOMA-IR) was calculated from fasting insulin x fasting glucose/22.5 at ages 17 and 24 years. Repeated echocardiography measured LVM indexed for height2.7 (LVMI2.7) was available at baseline and follow-up. Fat mass was repeatedly measured with dual-energy Xray absorptiometry at both time points. Multivariable adjusted association was examined using generalized linear mixed-effect models and adjusted for sex, family history of hypertension/diabetes/high cholesterol/vascular disease, socioeconomic status, and time-varying covariates measured at both baseline and follow-up such as age, high-sensitivity C-reactive protein, heart rate, systolic blood pressure, fat mass, lean mass, smoking status, sedentary time, light physical activity, moderate-to-vigorous physical activity, low-density lipoprotein cholesterol, triglyceride, and high-density lipoprotein cholesterol. Mediation analysis was conducted with a structural equation model adjusting for same covariates, except fat mass. Results Among 1595 adolescents (mean [SD] age at baseline, 17.74 [0.38] years; 955 [59.8%] females]) median insulin resistance increased from 1.46 to 1.74, median fat mass increased from 15.6kg to 19.2kg and the mean LVMI increased from 35.4g/m2.7 to 38.1g/m2.7, over 7 years. In a fully adjusted model, increased insulin resistance from adolescence through young adulthood was significantly associated with increased LVMI (effect estimate 1.01g/m2.7 [95% CI, 0.63 – 1.57], p<0.001) across the 7-year observation period. Increased fat mass mediated (62.3% mediation effect) the longitudinal association between insulin resistance and LVMI from ages 17 – 24 years. Conclusion Worsening insulin resistance from adolescence through young adulthood was associated with increased cardiac mass, contributing 37% to the total increase in LVMI between ages 17 to 24 years but increased fat mass explained two-thirds of the relationship.

AlN Nanotube Decorated with Small Tin Oxide Clusters as a Novel CH4 Sensing Material.

The success of carbon nanotubes has triggered a great deal of research interest in other one-dimensional nanomaterials with the aim of designing innovative nanostructures with attractive and distinctive attributes for applications in sensing gas molecules and toxic substances. In the present study, first-principles density functional theory calculations were exploited to assess the capability of the small tin oxide cluster (SnxOy)-decorated (6,0)aluminum nitride (AlN) nanotube for detecting methane(CH4) in terms of energetic, structural, and electronic properties. We found that SnxOy clusters were chemisorbed on the surface of the AlN nanotube due to the considerable adsorption energy and the notable charge transfer from the former to the latter. Further calculations demonstrate that the energy band gap and work function of the AlN nanotube were reduced in the presence of additives. Benefiting from the higher affinity of SnxOy toward the CH4 molecule, the Sn3O3-decorated AlN nanotube exhibited the greatest CH4 adsorption energy. The electrical conductivity increased as the energy band gap and effective mass decreased dramatically. Additionally, the type of Sn3O3-decorated AlN nanotube changed from a p-type semiconductor to an n-type one after adsorbing the CH4 molecule. Therefore, the Sn3O3-decorated AlN nanotube endows great promise as a thermopower-based, resistance-based, and Seebeck-effect-based CH4 sensing material.

Two-Dimensional ZrS2 and HfS2 for Making Sub-10 nm High-Performance P-Type Transistors.

Two-dimensional (2D) transition metal dichalcogenide (TMDC) semiconductors have been recognized as reliable candidates for future sub-10 nm physical gate length field-effect transistors (FETs). However, the device performance of 2D P-type devices is far inferior to that of N-type devices, which seriously hinders the development of complementary metal-oxide-semiconductor (CMOS) integrated circuits. Herein, we presented that two new 2D TMDC channel materials, ZrS2 and HfS2, can realize high-performance P-type MOSFETs through first-principles quantum transport simulations. Different from the 2D MoS2 and WSe2, the continuous in-plane p-orbitals at the valence band edge of 2D ZrS2 and HfS2 lead to a small hole effective mass of 0.24 m0. As a result, 2D ZrS2 and HfS2 P-type MOSFETs with 10 nm gate length possess an on-state current (Ion) as high as 2000 μA/μm. Moreover, even when the gate length shrinks to 5 nm, the Ion can also reach ∼1500 μA/μm with the energy delay product ranging from 3 × 10-30 to 1 × 10-29 Js/μm, which are better than many other 2D P-type MOSFETs like MoS2 and WSe2. Our work demonstrates that 2D ZrS2 and HfS2 are competitive channel materials for constructing future sub-10 nm P-type high-performance FETs.

Fuel Ignition in HTP Hybrid Rockets at Very Low Mass Fluxes: Challenges and Pulsed Preheating Techniques Using Palladium-Coated Catalysts

In a worldwide scenario which sees an increasing number of small satellite launches, novel mission concepts may be unlocked providing the spacecrafts with the very precise and rapid maneuvering capability that electric thrusters cannot guarantee. In this context, chemical thrusters appear to be a possible solution. This work aimed to experimentally study and solve the problem of ignition for 10 N hybrid rockets based on hydrogen peroxide. Firstly, the study analyzed the performance of a monopropellant engine capable of functioning as a hybrid injection system. In particular, the effects of the liquid mass injected, the initial temperature, and the supply pressure on the pulsed engine performance were experimentally investigated. The injected mass showed a greater impact on the performance with respect to the starting chamber temperature and injection pressure. This thruster also showed a good potential for space applications. In the second part of the work, the objective was to find an ignition procedure that reduced propellant consumption and eliminated the need for a glow plug. This is important because the electrical power consumption in real applications significantly affects other subsystems and is undesirable for chemical engines. Different ignition procedures were tested to emphasize their respective advantages and disadvantages, and the findings indicated that the concept of pulsed preheating is feasible with only a small amount of propellant consumption, while substantially decreasing the ignition duration from approximately 45 min to a maximum of just 3 min. Finally, similar ignition procedures were adopted using different fuels. The results showed that PVC and ABS, under the same operating conditions, ignite more easily than HDPE, which requires an oxidizer consumption approximately double that of the other two fuels. Considerations about the effect of chamber pressure and oxidizer mass flow rate on engine ignition were also included.

Investigation of nonlinear dynamic behaviors of vertical rotor system supported by aerostatic bearings

Abstract A common issue associated with gas bearing-rotor systems is the tendency to generate self-excited vibrations, leading to instability. To address this problem, the fluid-structure coupling model of an aerostatic bearing-rotor system is established in this paper. Then a hybrid method combining the finite difference method and direct integration method, is employed to solve the bearing lubrication equation and rotor motion equation simultaneously. Furthermore, based on the orbit of rotor center,frequency spectrum diagram, Poincaré map, waterfall diagram and bifurcation diagram, the effects of rotational speed, rotor mass, orifice diameter and nominal clearance on the nonlinear dynamic behaviors of the bearing-rotor system are investigated. The results indicate that the system exhibits rich nonlinear behaviors with increasing rotational speed and rotor mass, including the occurrence of typical half-speed whirl. However, the nonlinear vibrations of the system can be restricted by selecting appropriate bearing structural parameters, providing theoretical guidance for the design of aerostatic bearing-rotor systems.

Inclusion of 2D nanosheets on ZnSb matrix as a unique approach to improve its thermoelectric performance

Enhancing the thermoelectric performance has been made possible by the strategy of introducing an additional phase to the thermoelectric (TE) material. ZnSb: MoS2 nanocomposites are successfully prepared using the solid-state method and sintering. Structural and morphology analysis confirms the inclusion of MoS2 in the ZnSb matrix. The phonon scattering is greatly improved in nanocomposites with newly designed ZnSb: MoS2 interfaces without impairing electron transport. Homogeneous dispersion of MoS2 nanosheets in the ZnSb matrix modulates the carrier effective mass, which is aided by a considerably greater interfacial barrier. The energy filtering effect leads to a significantly higher Seebeck coefficient with strongly reduced phonon conductivity. The addition of MoS2 nanosheets improves the TE power factor (PF) of ZnSb over the temperature of 300 K–673 K. For the ZnSb: MoS2 nanocomposite with 10 wt% of MoS2 achieves a maximum PF of 419.67 μW/mK2 at 673 K, a value that is much greater than pristine ZnSb. It has been shown that zT can be significantly improved by enhancing power factor values and reducing thermal conductivity. A high value of 0.65 is achieved at 673 K for ZnSb:15 % MoS2, which is higher than that for pristine ZnSb. This study lays the path for enhancing the thermoelectric efficiency of p-type ZnSb using interfacial additive of 2D MoS2 nanosheets.

Determination of the particle size distribution of cube-shaped colloidal perovskite quantum dots from photoluminescence spectra: A combined theoretical-experimental approach.

A theoretical-experimental approach is proposed to convert the photoluminescence spectra of colloidal perovskite quantum dot ensembles into accurate estimates for their intrinsic particle size distribution functions. Two main problems were addressed and properly correlated: the size dependence of the first excitonic transition in a single cube-shaped quantum dot and the inhomogeneous broadening of the fluorescence line shape due to the size nonuniformity of the chemically prepared quantum dot suspension in addition to the single-dot homogeneous broadening. By applying the reported methodology to CsPbBr3 quantum dot samples belonging to the strong and intermediate confinement regimes, the calculated size distributions exhibited close agreement with those obtained from transmission electron microscopy, with precise estimates for the average particle size and standard deviation. Specifically for strongly confined ultrasmall CsPbBr3 quantum dots, the presented spectroscopic model for size distribution computation is based on a new analytical expression for the size-dependent bandgap, which was developed within the framework of the finite-depth square-well effective mass approximation accounting for band nonparabolicity effects. Such a quantum mechanical approach correctly predicts the expected transition to the intermediate confinement regime in sufficiently large quantum dots, which are traditionally described by the well-known bandgap equation in the infinite potential barrier limit with a spatially correlated electron-hole wavefunction and nonparabolic carrier effective masses. The proposed calculation scheme originates from general theoretical considerations so that it can be readily adapted to semiconductor quantum dots of many other systems, from all inorganic metal halides to hybrid perovskite materials, regardless of the adopted chemical synthesis route.

Quasi-exact l-states of Klein–Gordon equation with position-dependent effective mass for exponential scalar and vector fields

Quasi-exact l-states of Klein–Gordon equation with position-dependent effective mass for exponential scalar and vector fields

Monitoring of visual-evoked potentials during fat packing in endoscopic resection of a giant pituitary adenoma

Background: Endoscopic transsphenoidal surgery has become a mainstay surgical approach for sellar pathologies and can effectively decompress mass effects on the optic nerves. Visual-evoked potentials (VEPs) have been utilized as an intraoperative adjunct during endoscopic transsphenoidal surgery to monitor the integrity of the optic pathways, but the data surrounding its reliability and efficacy remain heterogeneous. Case Description: An 80-year-old male underwent endoscopic transsphenoidal resection of a pituitary macroadenoma with preoperative visual deficits related to optic nerve compression. During fat packing of the resection cavity, a decrease in VEPs was noted, which seemingly improved after partial fat removal, although with paradoxically reduced VEP latencies. Despite this, the patient developed a visual field deficit postoperatively, requiring re-operation for further removal of the fat packing. Conclusion: This was a case of initially poorly formed VEPs that deteriorated and apparently improved following surgical intervention. The finding of shortened latencies of the VEPs was likely from noise contamination, creating the illusion of improved signal amplitudes. We recommend careful assessment of VEP data for baseline reproducibility, particularly in patients with pre-existing visual field deficits. Appropriate anesthetic selection is also important to reduce noise interference from the electroencephalogram.

Multinodular Vacuolating Neuronal Tumors: Symptomatic Presentation Versus Incidental Finding: Case Series and Literature Review

Background: Multinodular Vacuolating Neuronal Tumors (MVNTs) are mixed glial–neuronal brain lesions classified as World Health Organization (WHO) CNS grade 1 tumors, often associated with long-term epilepsy. First described by Huse et al. in 2013 and included in the WHO CNS classification in 2016, MVNTs present a range of clinical manifestations, from symptomatic to asymptomatic. They typically affect young to middle-aged adults and exhibit diverse presentations. Radiologically, MVNTs are usually supratentorial, frequently located in the temporal lobe but also observed in the frontal and parietal lobes. MRI is essential for diagnosis, revealing multiple coalescing subcortical or cortical nodules with hyperintense signals on T2-weighted/FLAIR sequences, often without peripheral edema or mass effects. Case Reports: This paper presents two cases: one symptomatic MVNT with significant clinical manifestations, and the other documenting an incidental finding of MVNT in an asymptomatic patient. One case shows typical temporal lobe localization, while the other highlights a rare frontal lobe localization, with clear radiological findings on T2/FLAIR sequences. Conclusions: These cases illustrate the varied clinical presentations of MVNTs and emphasize MRI’s critical role in diagnosis and management. Asymptomatic cases often require conservative management, stressing the avoidance of unnecessary invasive procedures and the importance of regular monitoring.

Scant evidence for thawing quintessence

New constraints on the expansion rate of the Universe seem to favor evolving dark energy in the form of thawing quintessence models, i.e., models for which a canonical, minimally coupled scalar field has, at late times, begun to evolve away from potential energy domination. We scrutinize the evidence for thawing quintessence by exploring what it predicts for the equation of state. We show that, in terms of the usual Chevalier-Polarski-Linder parameters, (w0, wa), thawing quintessence is, in fact, only marginally consistent with a compilation of the current data. Despite this, we embrace the possibility that thawing quintessence is dark energy and find constraints on the microphysics of this scenario. We do so in terms of the effective mass m2 and energy scale V0 of the scalar field potential. We are particularly careful to enforce uninformative, flat priors on these parameters so as to minimize their effect on the final posteriors. While the current data favors a large and negative value of m2, when we compare these models to the standard ΛCDM model we find that there is scant evidence for thawing quintessence. Published by the American Physical Society 2024

Comprehensive evaluation of mechanical properties, optoelectronic features, photovoltaic performance, and crystal stability of Ba3MX3 (M = As, Sb; X = Cl, Br, I)

Herein, the first-principles computations are utilized to study the optoelectronic properties, photovoltaic performance, crystal stability, and mechanical features of Ba3MX3 (M = As, Sb; X = Cl, Br, I). Through comprehensive structural stability evaluation, all compounds are determined to be stable. The results indicate that Ba3MX3 (M = As, Sb; X = Cl, Br) is brittle while both Ba3AsI3 and Ba3SbI3 are ductile. The HSE06-based electronic structure calculations show that the direct-gap nature is revealed for six compounds, and the energy band gaps are within the range of 1.35–1.65 eV. The fundamental band gap can be modulated by virtue of X-anion substitution. The low carrier effective masses are disclosed for these compounds. Their optical features exhibit that high solar absorption and weak reflectance and energy loss are observed. Ultimately, an ultra-high theoretical conversion efficiency of 31.9 % is implemented for Ba3MI3 (M = As, Sb). Besides, the remaining four compounds also have high conversion efficiencies within 29–30 %. From the suitability for practical applications, both Ba3AsI3 and Ba3SbI3 are chosen as the best candidates for the absorber layers of effective single-junction solar cells. Our findings unveil the suitability of these inorganic materials for optoelectronic applications.

Charged Impurity Scattering and Electron-Electron Interactions in Large-Area Hydrogen Intercalated Bilayer Graphene.

Intercalation is a promising technique to modify the structural and electronic properties of 2D materials on the wafer scale for future electronic device applications. Yet, few reports to date demonstrate 2D intercalation as a viable technique on this scale. Spurred by recent demonstrations of mm-scale sensors, we use hydrogen intercalated quasi-freestanding bilayer graphene (hQBG) grown on 6H-SiC(0001), to understand the electronic properties of a large-area (16 mm2) device. To do this, we first analyze Shubnikov-de Haas (SdH) oscillations and weak localization, permitting determination of the Fermi level, cyclotron effective mass, and quantum scattering time. Our transport results indicate that at low temperature, scattering in hQBG is dominated by charged impurities and electron-electron interactions. Using low- temperature scanning tunneling microscopy and spectroscopy (STS), we investigate the source of the charged impurities on the nm-scale via observation of Friedel oscillations. Comparison to theory suggests that the Friedel oscillations we observe are caused by hydrogen vacancies underneath the hQBG. Furthermore, STS measurements demonstrate that hydrogen vacancies in the hQBG have an extremely localized effect on the local density of states, such that the Fermi level of the hQBG is only affected directly above the location of the defect. Hence, we find that the calculated Fermi level from SdH oscillations on the millimeter scale agrees with the value measured locally on the nanometer scale with STS measurements.

Mechanically Stable PMMA‐Based Large‐Area Nano‐Channels with Sub‐10 nm Depth

AbstractArtificial sub‐microfluidic and nanofluidic devices allow for studying mass or ion transport effects under spatial confinement. It remains challenging to fabricate large‐scale, nanofluidic channels of well‐defined thickness for fundamental studies and practical applications, especially for extreme confinement conditions (e.g., with sub‐10 nm channel height). Here, a strategy is reported to fabricate large‐scale nano‐channels with the channel height down to 5.0 nm. The fabrication is enabled by developing ultra‐flat and ultra‐thin polymethylmethaacrylate (PMMA) layers as the spacer. The ease of scaling up the channel length to a millimeter in the lateral dimensions with high mechanical stability is demonstrated. Furthermore, experimental evidence is provided of the role of the mechanical coupling between the spacer and capping materials in determining the device's mechanical properties, and how controlling the channel width and the top graphite thickness can be employed to tailor the device's mechanical properties. Finally, employing near‐field IR experiments, the decay constant is established for the near‐field absorption intensity of PMMA molecules inside the channel by increasing the top layer thickness. This work develops a novel method for fabricating large‐area, mechanically stable nano‐channels for nanofluidic devices and lays the foundation for further in situ spectroscopic studies of electrochemistry within sub‐10 nm confinement.

Band order reversal and valley engineering driving to dual high electron and hole mobility in strained monolayer BS

Strain engineering is an effective method to tune the physical properties of materials. In this work, we found that applying 5% biaxial compression to monolayer boron sulfur can simultaneously induce a band order reversal of valence bands and valley engineering of conduction bands. This change significantly enhances the room temperature intrinsic mobility, boosting it from 2 to 260 cm2 V−1 s−1 for holes and 63 to 543 cm2 V−1 s−1 for electrons. The high hole mobility surpasses that of bulk GaN and silicon. We further demonstrate that the valence band order reversal not only lifts the px/y state above the pz states, giving to a more dispersive highest valence band, and thus smaller electron scattering channels and hole effective mass, but also shifts the stronger σz bonding to weaker π-bonding characteristics, resulting in smaller electron–phonon coupling strength. Those combined effects results in a substantial increase in hole mobility.

A novel quantitative method for the determination of 10B-carrier boronophenylalanine in rat plasma by UHPLC-MS/MS and comparison with ICP-MS

L-Boronophenylalanine (BPA), a widely used 10B carrier for clinical boron neutron capture therapy (BNCT), was quantified in rat plasma through a simple, effective and stable ultra-high performance liquid chromatography-tandem mass spectrometry (UHPLC-MS/MS) method. Chromatographic separation was performed on an ACQUITY UPLC HSS T3 (100 mm × 2.1 mm, 1.8 μm) column with the mobile phase of 0.5 % formic acid aqueous solution and acetonitrile. For the detector, the m/z ion pairs used for quantification were 209.1→120.1 for BPA and 210.1→120.1 for internal standard in a positive mode by electrospray ionization (ESI) using multiple reaction monitoring (MRM). The method is specific and robust with rare affection by endogenous substances in the matrix. A good linear relationship was observed over 80–80000 ng/mL (r2 = 0.9993). The values of inter- and intra-day accuracy and precision were within the acceptance criteria of ±15 %. BPA was found to be stable under different experimental conditions. This developed method was successfully applied on a pharmacokinetic experiment on Sprague-Dawley rats (intravenous injection, 125 mg/kg) and a comparation between UHPLC-MS/MS and ICP-MS for BPA was carried out.

Strain-induced modulations in nonlinear optical rectification of core/shell quantum dots within an MEH-PPV polymer matrix under electric field: a 3D finite-element modeling study

This research aims to explore how the MEH-PPV polymer matrix and the strength of the applied field (EF) affect an electron confined within strained CdSe/ZnSe spherical core/shell quantum dots (CSQDs). By solving the Schrödinger equation using the element method (FEM) and effective mass approximation we calculated eigenenergy values and their corresponding wavefunctions. Through a compact density matrix approach, we examined how the MEH-PPV polymer matrix, QDs size and electric field intensity impact nonlinear rectification (NOR), in both unstrained systems. By considering factors such as the surrounding polymer matrix and size confinement we analysed computed coefficients related to EF intensity, peak locations and shifts. Our key findings suggest that understanding NOR in relation to parameters and surrounding materials can provide insights, for improving future optoelectronic and photonic devices.

A scattering matrix approach to the effective mass dependence of tunneling current through heterojunctions

A scattering matrix technique is used to calculate the longitudinal and transverse energy dependence of the transmission probability through various heterostructures using both the BenDaniel–Duke (BD) and the lesser known Zhu–Kroemer (ZK) boundary conditions to take into account the spatial dependence of the effective mass. We first illustrate the large difference in the transmission probabilities calculated using both boundary conditions for the simple problems of tunneling through a potential step, a single rectangular barrier, and a resonant tunneling device. Then, we present numerical calculations of the external electric field dependence of the field emission (FE) current from a n-doped GaAs semiconductor/vacuum interface using both boundary conditions, showing that the BD boundary conditions underestimate the FE current for large values of the applied external electrostatic field. A comparison of calculated FE characteristics with FE data may be a way to determine the appropriate boundary conditions to solve tunneling problems through heterostructures with spatially varying effective mass.

Flexible Hybrid Membrane with Synergistic Exciton Dynamics for Excessive 280 h of Durably Piezo-Photocatalytic H2O-to-H2 Conversion.

Solar-driven H2O-to-H2 conversion is a feasible artificial photoconversion technology for clean energy production. However, low photon utilization efficiency has become a major obstacle limiting the practical application of this technology. Herein, a metal atomic replacement (Sb→Ni) is conducted to disintegrate bulk Sb2S3 nanorods and synchronously grow the NiS nanolayers, and a flower-like Sb2S3-NiS nanocomposite with high BET specific surface area and synergistic exciton dynamics is constructed for simulated solar (SSL)-driven H2O-to-H2 conversion. The optimal Sb2S3-NiS nanocomposite is compounded with polyvinylidene fluoride (PVDF) to prepare a flexible PVDF/Sb2S3-NiS (PSN) hybrid membrane with stable structure and excellent recyclability via an electrospinning method. Due to the synergistically interacted organic-inorganic interface and high porosity, it is conducive to the exposure of effective active sites, exciton conduction and mass transfer and exchange, thereby an outstanding alkaline (Ph=13.0) H2O-to-H2 conversion activity with a 0.06% of solar-to-hydrogen efficiency and over 280 h (70 cycles) of durable recycling is achieved under the collaborative drives of SSL and weak ultrasound (40 Hz). This study raises a state-of-the-art membrane material for solar-driven panel reaction technology.