Effect Of Nitrogen Sources Research Articles

On-site cellulase production by Trichoderma reesei RutC-30 to enhance the enzymatic saccharification of ball-milled corn stover

Cellulases are essential for the enzymatic saccharification of lignocellulose. They play a crucial role in breaking down the structure of lignocellulose to obtain fermentable sugars. In this study, we conducted on-site cellulase production by Trichoderma reesei RutC-30 through submerged fermentation. The effects of carbon source, nitrogen source, KH2PO4, and mineral elements on cellulase production were evaluated using the hydrolyzed total sugar concentration of ball-milled corn stover as an indicator. The optimal fermentation medium conditions for cellulase production were determined through orthogonal experimental design analysis. Additionally, by optimizing culture conditions, including inoculation, pH, and bottling volume, we achieved a total sugar concentration of 92.25 g/L. After the optimization, the FPA, CMCA, protein, and total sugar concentration increased by 75.49 %, 18.43 %, 89.71 %, and 17.83 %, respectively. Furthermore, corn stover pretreated by different methods was applied to induce cellulase production. Ball-milled and steam-exploded corn stover was identified as suitable incubation carbon sources with total sugar concentration up to 94.31 g/L. Our work exploits the cellulase induced by lignocellulose and then applies it to lignocellulose, enabling the customization and providing a reference for the production of cellulase with corn stover as an inducer.

The role of organic amendments combined with nitrogen fertilizers in enhancing nitrogen use efficiency for wheat in saline calcareous soil

This study investigates the effects of combining different nitrogen fertilizers with organic amendments and Azospirillum brasilense on wheat growth, yield, and nutrient uptake in saline calcareous soil, with a goal of enhancing crop productivity while reducing environmental impacts. The objective was to evaluate treatments involving ammonium sulfate (AS), urea, and sulfur-coated urea (SCU), mixed with organic amendments such as Moringa seed residues (MSR), biogas manure (BM), and vermicompost (Ver), along with Azospirillum brasilense (ASB). Among these treatments, SCU emerged as the most effective nitrogen source, especially when combined with Vermicompost and ASB. Key results include the following: the highest Chlorophyll a content of 1.96 mg/g f wt was observed in the SCU treatment with Ver and ASB; Likewise, the same treatment exhibited the highest values of Chlorophyll b, carotenoids, and proline; the tallest plant height (117.50 cm) was also achieved with this combination; and the highest straw and grain weights (2.63 g/plant and 2.22 g/plant, respectively) came from the same treatment. Additionally, this treatment yielded the highest protein content at 19.29%. In terms of nutrient uptake, SCU-based treatments consistently demonstrated the highest values. The SCU with Ver + ASB treatment recorded the highest nitrogen uptake in straw at 78.64 mg plant−1, phosphorus uptake at 12.86 mg plant−1, and potassium uptake at 61.66 mg plant−1. Similarly, this combination yielded the highest N, P, and K uptake in grains, with 68.05, 10.88, and 53.15 mg plant-1, respectively. e

Effect of nitrogen sources on yield and economics of mustard

Effect of nitrogen sources on yield and economics of mustard

Effect of different nitrogen sources on yield and economics of fodder cowpea (Vigna unguiculata L.)

Effect of different nitrogen sources on yield and economics of fodder cowpea (Vigna unguiculata L.)

Effect of different nitrogen source and Saccharomyces cerevisiae strain on volatile sulfur compounds and their sensory effects in chardonnay wine

Three commercial Saccharomyces cerevisiae strains with low, medium, and high H2S-producing capacity were chosen to investigate the effect of yeast assimilable nitrogen (YAN) levels and composition on volatile compounds in a chemically defined medium, specifically high, medium, and low initial YAN levels with varying proportions of DAP or sulfur-containing amino acids (cysteine and methionine). The results revealed that the initial YAN containing a larger proportion of diammonium phosphate resulted in a higher YAN consumption rate during the early stages of fermentation. The yeast strain had a greater effect on the volatiles than the YAN level and composition. Keeping the total YAN constant, a higher proportion of sulfur-containing amino acids resulted in a considerably higher production of 3-methylthiopropanol. The sensory impact of three key volatile sulfur compounds was investigated in a Chardonnay wine matrix, indicating that 3-methylthiopropanol at subthreshold or greater concentrations was effective in enhancing the cantaloupe aroma.

Effect of Si3N4 on the in-situ synthetized non-oxide reinforcements in Al-Al2O3 composites under N2 atmosphere

Al-Al2O3 composite is widely used in high-temperature industry due to its excellent properties obtained through in-situ synthesis of non-oxide reinforcing phases. The effect of nitrogen source on the non-oxide reinforcing phases synthesized in-situ in the Al-Al2O3 composites at 1500 °C was investigated. The results show that when N2-gas is the sole nitrogen source, Al4O4C is the major reinforcing phase formed in the composite due to insufficient nitrogen amount provided. Through the construction of an Al@AlN core-shell structure and spontaneous nitrogen introduction by solid Si3N4 and N2-gas, higher amount of AlN mesophase is generated, and the complete transformation of Al to (Al2OC)1-x(AlN)x solid solution is successfully achieved. However, when Si3N4 content is excessive (i.e. Si/C mole ratio ≥ 1, where Si comes from solid nitrogen source Si3N4, C comes from phenolic resin binder), the stability of (Al2OC)1-x(AlN)x solid solution decreases, and more stable AlN-SiC solid solutions and SiAl4O2N4 are generated as reinforcing phases in the composite. This work provides meaningful information for the phase control of Al-Al2O3 composite at high temperature application.

Effects of Nitrogen Content and pH on Micropropagation of Rudraksha (Elaeocarpus ganitrus Roxb.)

This study evaluated the effects of pH and inorganic nitrogen sources (KNO3 and NH4NO3) on the regeneration of Elaeocarpus ganitrus Roxb. The pH and nitrogen concentration in the medium were crucial for the successful micropropagation of E. ganitrus. The concentration of nitrogen in the medium significantly affected the development and growth rate of cultures. As a basal medium, Murashige and Skoog's medium (MS) was employed together with various nitrogen concentrations and plant growth hormones. After 4-5 weeks of inoculation, BAP (0.5 mg/l) and NAA (0.1 mg/l) produced the maximum number of shoots (4.42 ± 2.17) among all the growth hormones tested. To obtain the maximum number of shoots and shoot length, different strengths of KNO3 (500-3500 mg/l), NH4NO3 (500-3500 mg/l), and pH (5-7.5) were adjusted in the medium. The largest number of roots was contained in MS medium with 1.0 mg/l NAA (4.47 ± 1.38) after root induction was carried out on MS with NAA, IBA, and IAA (0.2-2.0 mg/l). When the medium contained 1500 mg/l KNO3 and 2000 mg/l NH4NO3 (3.02 ± 1.60), the highest root initiation was observed. The rooting medium with a pH of 6.0 had the most influence and produced the maximum number of roots (4.8 ± 0.48). The plantlets were allowed to harden and acclimate in a greenhouse. A 76% survival rate was noted in the field.

Nitrogen sources and defoliation levels in cowpea bean

This study was aimed at evaluating the effect of artificial defoliation and different nitrogen sources on production traits of cowpea using mixed generalized linear models. The experiment was developed in a 3x5x2 factorial arrangement, being: three Nitrogen sources; five levels of artificial defoliation; and two defoliation seasons, with four repetitions. The plots were distributed in the Randomized Block Design, developed in a greenhouse and in the field. The following characteristics were evaluated: number of pods produced per plant; number of grains produced per pod; number of grains produced per plant; average length of pods; average weight of 100 grains; and estimated production. The GLIMMIX procedure was used because it allows the probability distribution of the response variable to take the appropriate distribution model. Production per Hectare (PHA) of plants subjected to leaf loss area can be increased up to 50% defoliation level, the variety Tumucumaque overcompensates in productivity, with maximum yields at 27.03% of defoliation and significant decrease above 75%, regardless of phenological stage. Even with losses above these levels, this cultivar had high indexes of productivity, revealing its high resistance to leaf loss injury. The use of chemical nitrogen fertilization and inoculation of cowpea seeds, variety Tumucumaque with Bradyrhizobium is unnecessary in the edaphoclimatic conditions of Bom Jesus – PI; The use of nitrogen fertilization with ammonium sulfate and inoculation of cowpea seeds with Bradyrhizobium does not influence the resistance of the Tumucumaque variety to defoliation levels; Defoliation levels above 75% impair the performance of production traits of cowpea, Tumucumaque.

Effect of Different Media, Temperature, pH and Nitrogen Sources on Growth and Development of Helminthosporium oryzae Causing Brown Leaf Spot of Rice

Effect of Different Media, Temperature, pH and Nitrogen Sources on Growth and Development of Helminthosporium oryzae Causing Brown Leaf Spot of Rice

Use of spent yeasts from bioethanol production plant as low-cost nitrogen sources for ethanol fermentation from sweet sorghum stem juice in low-cost bioreactors

Two spent yeasts from an ethanol production plant, spent yeast after distillation (SY-AD) and spent yeast after fermentation (SY-AF), were used as low-cost nitrogen sources for ethanol fermentation from sweet sorghum stem juice (SSJ) by a commercial dry yeast (Saccharomyces cerevisiae) in air-locked flasks. SY-AF was the more effective nitrogen source for ethanol fermentation, giving ethanol concentration (PE) and ethanol productivity (QE) values of 95.22 g/L and 1.98 g/L·h, respectively. When SY-AF was disrupted by autolysis, and the spent yeast hydrolysate (SYH) obtained was used as a nitrogen supplement. It was found that ethanol production in terms of PE and QE values increased to 102.20 g/L and 2.83 g/L·h, respectively. When three bioreactors, a stirred-tank bioreactor (STR, a typical bioreactor), a column bioreactor with stirrer (CS-R, a tower bioreactor) and an external loop bioreactor (ELR, a low-cost bioreactor with no agitation), were used for ethanol production from the SSJ supplemented with SYH, the fermentation efficiencies of all bioreactors were not different. Appropriate aeration during fermentation (0.31 vvm for 12 h) in the three bioreactors could enhance the QE value, reaching 3.36 g/L·h. Both the CR-S and ELR could be successfully used for ethanol production from SSJ supplemented with SYH.

Microbial Biosynthesis of Medium-Chain-Length Polyhydroxyalkanoate (mcl-PHA) from Waste Cooking Oil.

Waste cooking oil is a common byproduct in the culinary industry, often posing disposal challenges. This study explores its conversion into the valuable bioplastic material, medium-chain-length polyhydroxyalkanoate (mcl-PHA), through microbial biosynthesis in controlled bioreactor conditions. Twenty-four bacterial isolates were obtained from oil-contaminated soil and waste materials in Mahd Ad-Dahab, Saudi Arabia. The best PHA-producing isolates were identified via 16S rDNA analysis as Neobacillus niacini and Metabacillus niabensis, with the sequences deposited in GenBank (accession numbers: PP346270 and PP346271). This study evaluated the effects of various carbon and nitrogen sources, as well as environmental factors, such as pH, temperature, and shaking speed, on the PHA production titer. Neobacillus niacini favored waste cooking oil and yeast extract, achieving a PHA production titer of 1.13 g/L, while Metabacillus niabensis preferred waste olive oil and urea, with a PHA production titer of 0.85 g/L. Both strains exhibited optimal growth at a neutral pH of 7, under optimal shaking -flask conditions. The bioreactor performance showed improved PHA production under controlled pH conditions, with a final titer of 9.75 g/L for Neobacillus niacini and 4.78 g/L for Metabacillus niabensis. Fourier transform infrared (FT-IR) spectroscopy and gas chromatography-mass spectrometry (GC-MS) confirmed the biosynthesized polymer as mcl-PHA. This research not only offers a sustainable method for transforming waste into valuable materials, but also provides insights into the optimal conditions for microbial PHA production, advancing environmental science and materials engineering.

Synthesis and electrochemical performance of low cost nitrogen-doped carbon cryogel composites as supercapacitor electrodes

Developing cost-effective methods for synthesizing Nitrogen-doped carbon cryogels is crucial for advancing supercapacitor technology due to their enhanced electrochemical properties. Nitrogen-doped porous carbon cryogels are synthesized through the freeze-drying method by substituting resorcinol with phenol and using urea/melamine as nitrogen sources. The effect of nitrogen sources on the structure and electrochemical performance is investigated. In the case of carbon cryogel composites samples, using melamine as the nitrogen source (PMF) is more favorable than using urea (PUF), while both nitrogen-doped samples significantly outperform the undoped samples (PF). The PMF sample displays a specific surface area of 1119.00 m2 g−1, and a nitrogen content of 2.19 wt%. In the three-electrode system, the specific capacitance of the PMF sample reaches up to 247.9 F g−1 at a current density of 0.5 A g−1, and its rate performance is 85.52 %. By comparison, the PF sample exhibits specific capacitance and rate performance of 85.4 F g−1 and 33.44 % under the same parameters. The assembled symmetric supercapacitor in a buckle type system also demonstrates exceptional energy density (14.41 Wh kg−1), long-term cycle stability, and a favorable capacitance retention rate (72.2 %). These excellent electrochemical performances can be attributed to the synergistic effects of the hierarchical pore structures and heteroatoms doping.

Effects of different carbon and nitrogen sources on liamocin production kinetics of Aureobasidium pullulans NBRC 100716 strain.

Liamocins are molecules with a polyol lipid structure produced by rare strains of Aureobasidium pullulans. In recent years, liamocins have attracted attention due to their antibacterial, anticancer and surface-active properties, and promising potential applications have been identified in the food, agriculture, medical and pharmaceutical industries. This study is the first to investigate the effects of different carbon and nitrogen sources on the growth and liamocin production kinetics of A. pullulans NBRC 100716 strain. This strain was selected among six different A. pullulans strains whose liamocin productions were tested by us for the first time. In fermentations carried out in shaking water baths, the carbon source that most supported the liamocin production of this strain was fructose, and the nitrogen source was peptone-yeast extract combination. In the medium containing fructose and the peptone-yeast extract mixture, A. pullulans NBRC 100716 produced 4.26g liamocin L-1. The specific liamocin production rate (qp) of the strain in this medium was 0.0090g liamocin/g mo.h. This study is also the first to produce liamocin with a fructophilic A. pullulans strain. Present findings in this research also demonstrated the excellent biosurfactant capacity of the liamocin produced by this strain. The obtained liamocin reduced the water surface tension to a degree that can compete with synthetic surfactants. Furthermore, this is the first report to reveal that the fatty acid profile of liamocin obtained from A. pullulans NBRC 100716 contains an appreciable amount of unsaturated fatty acids and is similar to the composition of vegetable oil.

Characterization and Enhanced Production of Fungal Melanin from Aspergillus Species Isolated from Soil

This study aimed to isolate and identify fungi from soil samples, focusing on their ability to produce melanin. Eleven different genera of fungi were isolated and identified using lactophenol cotton blue staining and microscopic examination, referencing H.L. Barnett and Barry B. Hunter. Among these, only Aspergillus was found to produce melanin. Optimal melanin production conditions were determined to be a 1.5% tyrosine supplement in the growth medium, under shaking conditions (120 rpm) and dark incubation for three weeks, resulting in a yield of 21.08 mg/100 ml. Physiochemical characterization revealed that the extracted melanin was insoluble in organic solvents but soluble in alkaline solutions (NaOH, KOH), and partially soluble in DMSO. Spectrometric analysis using UV-Visible spectroscopy showed characteristic absorption peaks. FTIR indicated functional groups and Scanning Electron Microscopy (SEM) images displayed a granular and heterogeneous surface topology. The study also assessed the effects of different carbon and nitrogen sources, and trace elements on melanin production. Maltose and sucrose were the most effective carbon sources, while peptone was the most effective nitrogen source. Among trace elements, calcium significantly enhanced melanin yield, while copper and zinc had moderate effects. These findings provide valuable insights into optimizing fungal melanin production and its potential industrial applications. The study highlights the sustainable and scalable production of melanin from Aspergillus, contributing to the broader understanding of fungal metabolites and their commercial exploitation. Future research should focus on genetic and metabolic pathways to further enhance melanin biosynthesis and explore its diverse applications.

Effect of Various Nitrogen and Sulfur Sources on Maize-Wheat Yield and N:S Uptakes Under Two Different Climatic Conditions

Effect of Various Nitrogen and Sulfur Sources on Maize-Wheat Yield and N:S Uptakes Under Two Different Climatic Conditions

White root rot of Bletilla striata: the pathogen, biological characterization, and fungicide screening.

Bletilla striata is an endangered traditional medicinal herb in China. In May 2020, the emergence of white root rot severely impacted the quality and yield of B. striata, affecting about 5% of the plants at plant nurseries of the Chengdu Academy of Agricultural and Forestry Sciences. Through a series of experiments and evaluations, the pathogen was identified as Fusarium solani. This is the first report of B. striata white root rot caused by F. solani in Sichuan, China. To better understand this disease and provide data support for its control, a combination of morphological, molecular characterisation and pathogenicity determination was used in this study for assessment. Meanwhile, the effects of different carbon and nitrogen sources, culture medium, temperature, photoperiod and pH on mycelial growth and spore production of F. solani were investigated. In addition, effective fungicides were screened and the concentration ratios of fungicides were optimized using response surface methodology (RSM). The experimental results showed that sucrose was the optimum carbon source for the pathogen, and the optimum temperature and pH were 25°C and pH 7, respectively, while light did no significant effect. Effective fungicides were screened, among which difenoconazole showed the strongest inhibition with EC50 of 142.773 µg/mL. The optimum fungicide concentration scheme (difenoconazole, pyraclostrobin, and thiophanate-methyl at 395.42, 781.03, and 561.11 µg/mL, respectively) was obtained using response surface methodology (RSM) to improve the inhibition rate of 92.24 ± 0.34%. This study provides basic data for the pathogen characterization of B. striata white root rot and its potential fungicides in Sichuan, China. In addition, the optimal fungicide concentration ratios were obtained through response surface methodology (RSM) optimization, which significantly enhanced the fungicidal effect and provided a scientific basis for the future control of B. striata white root rot.

Effects of Nitrogen Sources on Primary and Secondary Production from Annual Temperate and Tropical Pastures in Southern Brazil

Improvements in nitrogen use efficiency can be achieved through fertilizer management strategies that capitalize on nutrient synergies. However, limited research on synergies between nitrogen, sulfur, and calcium complicates understanding causal links and developing sustainable management. In this regard, the effects of different nitrogen sources on productivity and nitrogen use efficiency in Italian ryegrass (Lolium multiflorum Lam.) and pearl millet (Pennisetum glaucum (L.)), along with their impacts on forage quality and secondary production, were investigated. Treatments included: Urea (46% N), ammonium nitrate (NH4NO3; 32% N), ammonium nitrate supplemented with calcium and sulfur (NH4NO3 (+), 27% N + 5% Ca + 3.7% S), and control treatment with no N application. The application of fertilizers that combine nitrogen with calcium and sulfur enhances primary production in both winter and summer pastures. Fertilization with NH4NO3 (+) increased nitrogen use efficiency by 125% in Italian ryegrass compared to NH4NO3. However, within the framework of rotatinuous grazing management principles, optimizing plant nitrogen use efficiency does not necessarily lead to a better forage quality or animal performance. These findings highlight that using fertilizers that promote synergies among nutrients, such as the combination of nitrogen with calcium and sulfur, can bring benefits to the sustainability of pasture-based livestock production systems.

Effects of nitrogen and carbon source addition on biomass and protein production by Rhodopseudomonas via the RSM-CCD approach

Recycling biomass and generating value-added products, such as protein, from wastewater treatment using photosynthetic bacteria (PSB), represents a promising avenue for renewable resources. However, there are several crucial factors that can influence the efficiency of protein production in PSB. In this study, response surface methodology was employed to assess and optimize the effects of carbon and nitrogen sources on protein and biomass production, respectively. A three-factor central composite design (CCD) analysis revealed that the highest biomass and protein production, reaching 1.267 and 0.459 g/L, respectively, were achieved under the optimal conditions of 0.442 % sodium acetate (X1), 0.577 % sodium bicarbonate (X2), and 0.5105 % fructose (X3). Another three-factor CCD analysis focusing on nitrogen sources demonstrated that the corresponding biomass and protein production were 1.288 and 0.417 g/L, respectively, under the optimal conditions of 0.600 % urea (X4), 0.679 % ammonium sulfate (X5), and 0.805 % sodium glutamate (X6). The experimental results and predicted biomass and protein production were shown to be very comparable, verifying the predictability of the used models. This research provides the basis for developing a green and economic PSB wastewater treatment process and for promoting the widespread use of protein recovery.

Effects of Applying Different N Sources on Cd Accumulation, Mineral Micronutrients, and Grain Yield of Durum Wheat

This study aimed to investigate the effects of different nitrogen sources on Cd concentration in durum wheat grains in soils with low and high Cd contamination. Triticum turgidum L. durum, cv. Balcali-2000 was sown as test plant material in plastic pots containing 3.2 kg of soil. Low (0.5) and high Cd (5.0 mg Cd kg− 1 soil) were added to the culture media in the form of 3(CdSO4).8H2O. Nitrogen was also added in the form of Ca(NO3)2.4 H2O in low, sufficient, and high concentrations. In addition, a foliar application of 0.5% urea was used as a further nitrogen supply. The results showed that the total nitrogen content and the Cd concentration of the grains increased with increasing nitrogen application. This increase was more pronounced with a combination of soil nitrogen and foliar urea. While the Cd concentration in the grains was 354 µg kg− 1 at low soil Cd concentration and insufficient nitrogen supply, the Cd concentration in the grains increased by 40% to 498 µg kg− 1 at low Cd concentration and high nitrogen supply. This increase in Cd concentration in the grains was 32% higher under high nitrogen applications than at high Cd-insufficient conditions. In addition, foliar application of urea to durum wheat leaves at low soil Cd concentrations increased the Cd concentration in the grains from 354 µg kg− 1 to 484 µg kg− 1. This study showed that different treatments and amounts of nitrogen sources can affect the uptake and accumulation of Cd in wheat grains at different Cd levels.

Influence of Inorganic Nitroge N-Nutrients on Copper Toxicity in <I>Anacystis nidulans</I> and Cyanophage As-I Resistant Mutant

The effect of different nitrogen sources on growth and copper toxicity was studied in the unicellular cyanobacterium Anacystis nidulans and Gyanophage AS-1 resistant mutant (An/AS-1). The mutant An/AS-1 was characterised by slow growth rate but was more senstitive to copper than its parent. In both the strains, the presence of high nitrate concentrations, which supported better growth of algae, reduced the algicidal effect of copper. However, other inorganic nitrogen sources such as nitrite and ammonium caused more inhibition and reduced the specific growth rate.