Effect Of Nanofillers Research Articles

Achieving performance and functionality in PLA-based packaging: Insights from hybrid composites with false banana (Enset) fiber and ZnO nanoparticles

The use of poly(lactic acid) (PLA)-based composites reinforced with natural fibers is becoming increasingly popular in sustainable packaging. However, these materials often lack adequate barriers and desirable functional properties. Concurrently, zinc oxide nanoparticles (ZnO NPs) have been incorporated into PLA-based composites to develop functional packaging films. Despite this progress, there is a gap in the literature regarding packaging materials that require both functional and performance properties, specifically those that combine natural fibers and ZnO NPs within the PLA matrix. This study aims to develop and optimize the effects of ZnO nanofillers and false banana, also called Enset fibers (EFs) as hybrid reinforcements in PLA matrices. A central composite design (CCD) approach was used to evaluate the effects of EFs at three levels (5 %, 15 %, and 25 % w/w) and ZnO NPs at three levels (0 %, 5 %, and 10 % w/w) on the performance (tensile and flexural strength) and functional properties (water and antibacterial activity) of the resulting nanocomposite materials. The findings indicate that the inclusion of ZnO NPs significantly enhanced both the performance and functional properties of the nanocomposites, whereas the inclusion of EFs improved the performance properties but reduced the functional properties of the nanocomposites. Ultimately, this study identified an optimal formulation for producing durable and functional composites for various packaging applications.

Effect of Hybrid Nanofillers on the Mechanical Characteristics of Polymethyl Methacrylate Denture Base Composite

The research study focused on enhancing the mechanical characteristics of polymethyl methacrylate (PMMA) denture bases. PMMA is commonly used in dentistry due to its easy fabrication, cost-effectiveness, and favourable physical properties. However, its limitations include low wear resistance, hardness, and mechanical strength, making it less suitable for long-term dental applications. To address these limitations, the study employed a combination of hybrid nano-fillers, specifically HNTs (halloysite nanotubes) and MWCNTs (multi-walled carbon nanotubes), at varying loading levels to improve the mechanical characteristics of the PMMA composite. These nano-fillers underwent treatment by using a coupling agent to enhance their compatibility with PMMA. Key findings of the research include that introducing HNTs/MWCNTs into the PMMA matrix led to a substantial increase in flexural strength, with a significant improvement of 109.1 MPa compared to unfilled PMMA. This indicates that the composite material became more resistant to bending or deformation. There was a substantial rise in flexural modulus values, suggesting improved stiffness in the nanocomposite compared to unfilled PMMA. In addition, the tensile strength of the PMMA composite increased by 64.4 MPa with the addition of the hybrid nano-fillers, indicating enhanced resistance to stretching or pulling forces. The study found that the improvement in flexural and tensile strength was dependent on the concentration of MWCNTs. Increasing the MWCNT concentration up to 0.75 wt.% led to improved mechanical properties, but further increases resulted in a reduction in PMMA properties. Although there was a modest improvement in Vickers hardness (approximately 18.93 kg/mm<sup>2</sup>), the addition of HNTs/MWCNTs as hybrid nano-fillers effectively enhanced the properties of the PMMA nanocomposite. The study concludes that incorporating hybrid nano-fillers into PMMA could contribute to the longevity and durability of dental composites, addressing some of the material's inherent limitations. The specific combination and concentration of nano-fillers played a crucial role in determining the mechanical properties of the resulting nanocomposite.

Leveraging colloid and interface science for long-term marine performance of hybrid coatings: Effects of different nanoparticles on anticorrosion and antifouling properties

This study leveraged the unique colloidal and interfacial properties of synthesized SiO2, ZnO, and carbon (CN) nanoparticles as effective nanofillers to enhance the anti-corrosion and antifouling properties of PMMA coatings. By optimizing nanoparticle dispersion, stability, and functional performance within the polymer matrix, we achieved improved surface roughness, hydrophobicity, mechanical stability, and antimicrobial properties. Hybrid coatings containing 1.5 wt% of these nanoparticles were applied to stainless steel (SS) substrates and evaluated through water contact angle measurements, pull-off adhesion strength tests, antibacterial assays, and electrochemical impedance spectroscopy (EIS). The results demonstrate that the synergistic effects of SiO2, ZnO, and CN nanoparticles significantly enhance the coatings' anticorrosion and antifouling characteristics by increasing hydrophobicity, total impedance, and antibacterial activity via reactive oxygen species generated by ZnO and CN. Additionally, over two years, the coating’s long-term protection was assessed by submerging coupons at a 6-meter depth in the Bocana Chica reef barrier, a site with rapid biofouling colonization, making this test a demanding evaluation.

An atomistic and experimental approach to study the effect of water and nanofillers on the compressive strength of PEGDA hydrogels for cartilage replacement

Polyethylene glycol diacrylate (PEGDA) hydrogel is emerging as a potential candidate for biomedical applications, particularly cartilage replacement. However, due to weak mechanical strength, their applications are still in the infancy for cartilage replacement. In this article, authors have reported the compressive strength of hexagonal boron nitride (h-BN) reinforced PEGDA hydrogels in conjunction with different water content. A combined experimental and atomistic approach (Molecular Dynamics) was employed to explore the compressive strength of nanocomposite hydrogels. It was reported from the experimental analysis that h-BN acts as a superior reinforcement for the compressive strength at lower water content. The Molecular Dynamics (MD) based simulations also predict a similar trend with h-BN and water content. The MD-based study gives insight into scrutinizing the behavior of polymer chains and their entanglement and sheds light on microscale phenomena that are usually inaccessible through experiments alone. It can be concluded from the experiments in conjunction with MD simulations that at higher water content, the contact points between h-BN nanosheets and polymer chains decrease, mitigating the overall compressive strength of PEGDA hydrogels. In summary, this study enables us to obtain meaningful mechanical properties that mimic the strength of human articular cartilage.

Preparation and Characterization of Graphene Oxide/Carbon Nanotube/Polyaniline Composite and Conductive and Anticorrosive Properties of Its Waterborne Epoxy Composite Coatings.

The organic coating on the surface is common and the most effective method to prevent metal materials from corrosion. However, the corrosive medium can penetrate the metal surface via micropores, and electrons cannot transfer in the pure resin coatings. In this paper, a new type of anticorrosive and electrically conductive composite coating filled with graphene oxide/carbon nanotube/polyaniline (GO/CNT/PANI) nanocomposites was successfully prepared by in situ polymerization of aniline (AN) on the surface of GO and CNT and using waterborne epoxy resin (WEP) as film-forming material. The structure and morphology of the composite were characterized using a series of characterization methods. The composite coatings were comparatively examined through resistivity, potentiodynamic polarization curves, electrochemical impedance spectroscopy (EIS), and salt spray tests. The results show that the GO/CNT/PANI/WEP composite coating exhibits excellent corrosion resistance for metal substrates and good conductivity when the mass fraction of GO/CNT/PANI is 3.5%. It exhibits a lower corrosion current density of 4.53 × 10-8 A·cm-2 and a higher electrochemical impedance of 3.84 × 106 Ω·cm2, while only slight corrosion occurred after 480 h in the salt spray test. The resistivity of composite coating is as low as 2.3 × 104 Ω·cm. The composite coating possesses anticorrosive and electrically conductive properties based on the synergistic effect of nanofillers and expands the application scope in grounding grids and oil storage tank protection fields.

Enhancement of electrical conductivity and band gap of epoxy/MWCNT/GNP/glass fibers hybrid materials

Polymer composites containing carbon nanoparticles have attracted considerable attention because of their special functional characteristics. Characterization of optical and dielectric characteristics was done. To comprehend the impact of nanofillers, dielectric characteristics, UV–Vis spectroscopy, XRD, and Fourier transform spectroscopy were employed. The role of carbon fillers on metrics, such as band gap energy, absorption coefficient, and dielectric characteristics of nanocomposites was examined to differentiate between the effects of nanofillers. The AC conductivity is explained following the classical percolation theory. The percolation threshold is discovered to be 1 wt.% of a hybrid system of nanofillers consisting of graphene nanoplatelets (GNPs) and multi-walled carbon nanotubes (MWCNTs). The presence of carbon nanofillers significantly enhances the electrical conductivity of the nanocomposites. The optical band gap energy of nanocomposites was obtained from the Tauc method. The study establishes the relationship between band gap energy and AC conductivity using Tauc’s relation and Jonscher’s power law. The results show that the band gap energy of composites decreases with the addition of hybrid nanofillers, with values observed at 2.65 eV and 2.95 eV, while without fillers of 3.1 eV and 3.05 eV attributed to increased localized states within the bandgap. Composites with nanofillers show an AC conductivity of 1.86 S/m at 1 wt% of nanofillers, compared to 1.52 × 10−6 S/m and 1.09 × 10−6 S/m for composites without nanofillers. The UV–Vis spectra reveal a significant blue shift in the absorption peak when the weight percentage of carbon nanoparticles is increased. The findings of this study point toward the possibilities of the development of novel nanocomposites with enhanced performance for electronics and energy storage.

Nanocomposites of Glass/Sisal Fibre Strengthened Hybrid Polymer Matrix and the Effect of SiC Nanofillers on its Mechanical Features

Introduction: This study investigates the mechanical characteristics of hybrid sisal fibre (SF)/glass fibre (GF) reinforced composites with various weight % of nSiC fillers (nano silicon carbide). SF/GF/nSiC reinforced hybrid composite materials were developed following ASTM specifications using the vacuum infusion technique. Method: The resulting composites were then evaluated for their tensile, impact, hardness, and flexural characteristics. The findings reveal that none of the composites can imitate the GF composite's mechanical advantages despite hybridization and the nanofiller addition. The hybrid composite laminates with 2 wt.% nSiC show better mechanical response than competing hybrid composites. Results: The GF/SF/2%nSiC composite's impact strength and shore D hardness of the GF/SF/2%nSiC composite are 1.25 and 1.2 times greater than those of the GF/SF/3%nSiC composites. The GF/SF/2%nSiC composites exhibit 1.64, 1.5, and 1.8 times higher tensile strength, tensile modulus, and toughness modulus than the GF/SF/3%nSiC composites. The GF/SF/2%nSiC composite has a flexural modulus and strength of 1.22 and 1.41 times higher than the GF/SF/3%nSiC composites. Conclusion: The improved mechanical properties of the GF/SF/2%nSiC composite can be attributed to the firm bond between the fibre and matrix, the uniform dispersion of nanofillers, and reduced porosity. result: The tensile, impact, hardness, and flexural properties of the developed composites were assessed. SEM of the fractured surface was also performed to corroborate the results and determine the fracture mode.

Effect of synthesized copper oxide nanorods on electrical and thermal properties of compatibilized high‐density polyethylene/carbon nanofiber nanocomposite films

AbstractHigh‐density polyethylene (HDPE) nanocomposites containing different optimized fractions of carbon nanofiber (CNF) at 6 wt.%, polyethylene glycol (PEG) at 4 wt.%, and copper oxide (CuO) nanorods in concentration ranges of 0.15, 0.5, and 2 wt.% were successfully melt processed using corotating twin extrusion and compression molding technique. The effect of PEG and CuO nanofiller on the HDPE matrix were studied, particularly for the percolation threshold for electrical conductivity, structural morphology, and other properties including thermal stability, thermal conductivity (TC), dielectric, and UV protection properties. It is observed that PEG acts as a good compatibilizer, facilitating better interfacial connection between CNF and HDPE matrix. The optimized composite with 0.15 wt.% CuO nanorods (H/C6/P4/Cu0.15) shows a fine morphology and strong interfacial connections between fillers and the matrix, as observed in FE‐SEM micrographs. This optimized composite exhibits improved thermal stability, higher thermal conductivity (0.0404 W.K−1.m−1), increased dielectric constant, reduced electrical volume resistivity (from 2.1 × 1015 to 2.1 × 106 Ω.cm), and lower optical band gap value (2.74 eV). Additionally, all prepared nanocomposites offer approximately 100% Ultraviolet Protection Factor (UPF) rating for UV protection.Highlights The transformation of insulating HDPE into conducting HDPE composites. The effect of CuO nanorods was investigated in compatibilized HDPE composites. A percolation is achieved in the HDPE composite at 0.15 wt.% of CuO nanorods. PEG and CuO nanorods improved the multifunctional properties of the composite.

Enhanced Free Li-Ion Mobility in Solid-State Electrolytes via Long-Range Assembly of Porous Materials.

Metal-organic frameworks (MOFs), with their tunable pore sizes and high surface areas, are gaining prominence in Li metal battery applications, including their use as nanofillers in solid composite electrolytes (SCEs) for enhanced ionic conductivity. Yet, when used in SCEs, individual dispersed MOF particles in isolation as nanofillers can impede efficient ion transport in all-solid-state batteries due to the insufficient supply of ionic transport pathways within SCEs. Here, we introduced a continuous SCE nanofiller with long-range assembly interconnected porous MOFs (IMOF_SCE) for effective ion transport pathway supply along the interface between the nanofiller and the polymer matrix. IMOF_SCE achieved Li-ion conductivity (6.72 × 10-5 S cm-1 at 20 °C) and Li-ion transference number (tLi+ = 0.855), resulting in the improved electrochemical performance of Li metal batteries. Additionally, the Li/LiFePO4 full cell integrated with IMOF_SCE achieved an outstanding stable capacity retention of 98.8% in 300 cycles. This work offers insights into the design strategy of effective nanofillers for SCEs and can be adapted for other porous materials.

Nanofiller effect of single-walled carbon nanotubes to elongate, toughen and acceleratingly produce ionic liquid dry-jet wet spun cellulose fibre

A cellulose is produced from renewable natural resources, and the regenerated fibres have been widely utilized, e.g., a tyre cord fabric. However, the production of viscose Rayon is inevitable to use environmentally burdened chemicals like CS2. We propose an eco-friendly cellulose fibre created with a recyclable ionic liquid, further mechanically toughened using a nanofiller. A synergetic architecture composed of minute amount of 0.1 wt% single-walled carbon nanotubes (CNT) and cellulose matrix achieves the increased (34 %) elongation and the retained tensile strength, thus creating the enhanced (39 %) toughness. Such a unique enhancement is different from diverse fillers generally known to decrease the elongation in return for the increased strength. To fully draw the reinforcement, controlling the bundled CNT particle size analogous to cellulose microfibril is essential. Moreover, the CNTs are advantageous to a high throughput, and maximum take-up rate of the wet-spun fibre is boosted (30 %).

Effects of Nanofillers and Synergistic Action of Carbon Black/Nanoclay Hybrid Fillers in Chlorobutyl Rubber

Nanocomposites based on chlorobutyl rubber (CIIR) have been made using a variety of nanofillers such as carbon black (CB), nanoclay (NC), graphene oxide (GO), and carbon black/nanoclay hybrid filler systems. The hybrid combinations of CB/nanoclay are being employed in the research to examine the additive impacts on the final characteristics of nanocomposites. Atomic force microscopy (AFM), together with resistivity values and mechanical property measurements, have been used to characterise the structural composition of CIIR-based nanocomposites. AFM results indicate that the addition of nanoclay into CIIR increased the surface roughness of the material, which made the material more adhesive. The study found a significant decrease in resistivity in CIIR–nanoclay-based composites and hybrid compositions with nanoclay and CB. The higher resistivity in CB composites, compared to CB/nanoclay, suggests that nanoclay enhances the conductive network of carbon black. However, GO-incorporated composites failed to create conductive networks, which this may have been due to the agglomeration. The study also found that the modulus values at 100%, 200%, and 300% elongation are the highest for clay and CB/clay systems. The findings show that nanocomposites, particularly clay and clay/CB hybrid nanocomposites, may produce polymer nanocomposites with high electrical conductivity. Mechanical properties correlated well with the reinforcement provided by nanoclay. Hybrid nanocomposites with clay/CB had increased mechanical properties because of their enhanced compatibility and higher filler–rubber interaction. Nano-dispersed clay helps prevent fracture growth and enhances mechanical properties even more so than CB.

Impact of solvent temperature on graphite shear exfoliation efficiency

Liquid phase exfoliation (LPE) of graphite is a promising pathway for graphene flakes (GF) due to its scalability and cost-effectiveness. However, the method has significant limits at the industrial scale, such as low yield of GF and long processing times. In this study, we investigate the effect of organic solvents such as N-methyl-2-pyrrolidone (NMP) and methyl-5-(dimethylamino)-2-methyl-5-oxopentanoate (PolarClean) temperature on shear-induced exfoliation. The GF concentration was successfully obtained 0.62 mg/ml in NMP and 0.68 mg/ml in PolarClean within just 2 h at 263 K, without surfactants or any additional additives. These results revealed the improved exfoliation efficiency due to changes in solvent polarity, surface tension, and dispersion stability with increased viscosity. In addition, we investigate the optimization conditions required for liter-scale shear-induced exfoliation of graphite in PolarClean. As-prepared GF has significant potential as an effective nanofiller for enhancing the mechanical strength of commercial polymers. This study not only advances the understanding of the LPE mechanisms but also paves the way for the industrial application of this method in the green synthesis of graphene-based nanocomposites.

Investigation on improving mechanical property of silicone rubber by employing functionalized nanosilica

In this paper, the functionalized nanosilica was prepared via covalent modification and used as effective nanofillers to reinforce silicone rubber matrix. The influence of functionalized nanosilica on the mechanical property of PVMQ was examined. The microstructures of the nanocomposites were characterized by Fourier-transform infrared spectroscopy, scanning electron microscopy, and X-ray diffraction. As the nanosilica loading reaches up to 90 wt%, the tensile strength of functionalized nanosilica/PVMQ rubber nanocomposites can reach the maximum values (3.67 MPa). It was noteworthy that the functionalized nanosilica not only could be homogeneously dispersed and incorporated into the polymeric matrix as fillers but also could be effectively improved the mechanical property of the silicone rubber.

Effect of TiO2 Nanofillers on the Mechanical and Abrasive Wear Properties of Epoxy Reinforced with Carbon Fabric Hybrid Composites.

Recent studies show that nanofillers greatly contribute to the increase in the mechanical and abrasive behaviors of the polymer composite. In the current study, epoxy composites were made by hand lay-up with the reinforcement of carbon fabric and titanium dioxide (TiO2) nanoparticles as secondary reinforcement in weight percentages of 0.5, 1.0, and 2.0. Hardness, tensile, and abrasive wear tests have been carried out for the fabricated composites. The obtained results confirm that as the percentage of filler addition increases, hardness of the carbon epoxy (CE) composite increases, and significant enhancement of 10.25% hardness is confirmed in 2 wt % nano TiO2-added CE composite. The CE composite filled with 2 wt % of TiO2 nanofiller shows 15.77 and 9.15% improvement of tensile strength and modulus, respectively, compared to unfilled CE composites. The abrasive wear volume exhibits a nearly linear increasing trend as the abrading distance increases. In addition, it is discovered that the abrasive wear volume is greater for higher applied loads. The inclusion of nano TiO2 reduced the wear loss in the CE composite for all abrading distances, regardless of the load, low or high. The scanning electron microscopy analysis of worn surfaces was carried out to analyze the contribution of the filler to improve the wear resistance.

Effects of nanofillers on the physical, mechanical, and tribological behavior of carbon/kenaf fiber–reinforced phenolic composites

Abstract This research investigates the effect of kenaf/carbon fiber reinforcement with the addition of nanofillers such as multi-walled carbon nanotubes (MWCNT) and cellulose nanocrystal (CNC) in the phenolic matrix composite. Three different types of samples were made using short carbon fiber, kenaf fiber (KF), BaSO4, Cashew dust, MWCNT, and CNC. Sample 1 contains 40 wt% of carbon fiber with binders reinforced in the phenolic matrix, whereas, in sample 2, carbon fiber has been replaced with KF in the MWCNT-modified phenolic matrix. On the other hand, in sample 3, carbon fiber has been replaced with KF in a CNC-modified phenolic matrix. The physical, mechanical, and tribological properties were investigated and compared. The results showed that sample 1 exhibited higher mechanical performance compared to other samples. On the other hand, the least wear loss and a high coefficient of friction were observed for Sample 2 compared to Samples 1 and 3. Even though KF-based composites exhibited slightly lower mechanical performance, they showed excellent tribological behavior.

Enhancement of thermal conductivity and insulation of silicone thermal interface material through surface modification and synergistic effects of nanofillers for thermal management of electronic devices

Thermal interface materials (TIMs) play an irreplaceable role in highly integrated microelectronic devices. In this work, the addition of acidified carbon nanotubes modified by 3-aminopropyl triethoxysilane (KH550) had an effective enhancement to the thermal conductivity, thermal stability, and electrical insulation performance of silicone grease. On this basis, multi-filled silicone grease composites with better thermal conductivity and electrical insulation were prepared by introducing zinc oxide (ZnO) and Graphene nanoflakes (GNFs). The thermal conductivity of silicone grease achieved 1.438 W m−1 K−1, while the volume resistivity still exceeded 1013 Ω·cm. Additionally, the study explored the impact of varying filler parameters, temperature, and contact pressure on the interface thermal contact resistance of silicone grease. The best performance silicone grease applied to the cooling of the high-power LED exhibited excellent heat dissipation. This work presented a reference for the design and development of low cost, high performance TIMs.

Fabrication of GNPs sprayed carbon fiber and its effects on the interfacial and mechanical behavior of reinforced epoxy multiscale laminated composite

AbstractThe current research compares the effects of modifying carbon fiber [via spraying graphene nanoplates (GNPs)] and/or GNPs reinforcement on the mechanical and interfacial behavior of carbon fiber epoxy composites. Using a spraying method, the epoxy matrix was reinforced, and carbon fiber was modified with 0.2 and 1 wt% of GNPs, respectively. Tensile, interlaminar, and dynamic mechanical analyses (DMA) tests were conducted on the composite to assess the role of GNPs in enhancing mechanical, interfacial, and thermomechanical properties. The obtained results indicate that the spraying technique effectively enhanced the ultimate tensile strength (UTS) and interlaminar fracture toughness (ILFT) of the composite. The UTS improved by 31%, while the ILFT significantly improved by 38%. Additionally, assessing the modulus gradient through the interface shows improved interfacial interaction between modified carbon fiber and reinforced epoxy. Scanning electron microscopy examination of the fractured surfaces indicated that the existence of nanofillers with high surface area contributed to significant improvements in adhesion between the modified fiber and reinforced epoxy matrix, leading to enhanced interfacial, mechanical, and thermomechanical properties of CFRPs for structural applications.Highlights Incorporation of surface modified carbon fibers and GNPs reinforcement in the epoxy matrix to enhance the interfacial interaction. Evaluation of the effects of GNP nanofiller on interfacial and mechanical performance of the composite. Fracture surfaces in ILSS, tensile, and mode I test were analyzed using FESEM. Utilization of nanoscale modulus mapping for the fiber‐matrix interface assessment.

Effect of TiO2 Nano-Filler with Jute/Kenaf/Glass in Tensile and Impact Properties on Fiber Stacking Sequence

Objective: The prime goal of this study is to conduct a comprehensive analysis, modelling, and optimization of various independent factors and coming up with a material that suits in structural application in automobile. Method: Composite is prepared using hand lay-up technique. The analysis is carried out through the utilization of the Central Composite Design (CCD) approach. Mathematical models are formulated for ultimate tensile strength and impact resistance, employing the RSM. These factors include fiber orientation, fiber sequence, and filler percentage, with a focus on their influence on mechanical properties. Finding: These models act as valuable tools for the selection of the most favourable independent variables to maximize the mechanical properties related to tensile strength and impact resistance. In conclusion, the experimental findings emphasize that the inclusion of Nano-filler results in an enhancement of 20% and 36% on tensile strength and impact properties respectively. Novelty: TiO2-infused polymers exhibit unparalleled strength and flexibility, promising transformative advancements in this work that can be implemented in aerospace, indoor, automobile, and medical industries. Keywords: Titanium dioxide, Nano­filler, Hybrid composite, Response surface methodology, Epoxy

Research progress in modified mineral oil, natural ester and mixed oil in transformers

AbstractThree kinds of typical insulating oil including mineral oil (MO), natural ester (NE), and mixed insulating oil used in transformers are reviewed. The basic physicochemical, electrical properties and engineering application of the oil were firstly introduced. Then, the nano‐modified mechanism for MO and NE is explored. The effects of various nanofillers on electrical properties, thermal conductivity and ageing stability of MO and NE are compared. Moreover, the preparation process of mixed insulating oil is described, and the enhancement of electrical performance, thermal ageing properties, and kinematic viscosity of mixed insulating oil are analysed. Finally, the performance parameters of nano‐modified MO, NE and mixed insulating oil are analysed, and the future development trend of insulating oil is also discussed.

Lignosulfonate-Coated ZIF-8 as an Effective Nanofiller to Prepare High-Performance Thin-Film Nanocomposite Forward Osmosis Membrane for Heavy Metal Ions Removal

Lignosulfonate-Coated ZIF-8 as an Effective Nanofiller to Prepare High-Performance Thin-Film Nanocomposite Forward Osmosis Membrane for Heavy Metal Ions Removal