Effect Of Displacement Research Articles

The new approach of a simulation low dose rate radiation effects in bipolar integrated circuits

The model is proposed to explain the effects of low dose rate under the radiation influence in bipolar structures, taking into account the effects of subthreshold displacement in high-doped silicon layers. The base current degradation of bipolar transistor is determined of surface and displacement radiation effects in the near-surface base area. The conditions for the enhanced low dose rate sensitivity (ELDRS) in bipolar structures are shown. The presented results of the analysis allow us to explain most of the observed experimental results.

Impact Of Foreign Direct Investment On Domestic Investment In Brazil

In an era marked by rapid globalization and intricate economic interconnections, FDI has emerged as a critical driver of economic growth in many developing nations. Brazil, as the largest economy in Latin America, has witnessed significant fluctuations in FDI inflows over the past decades. The question of whether FDI can stimulate domestic investment remains a topic of considerable interest among economists, policymakers, and scholars. This study delves into the complex relationship between FDI and domestic investment in Brazil, employing historical data, economic indicators, and existing scholarly research. Brazil, as a prominent emerging economy and a global economic force, has consistently attracted international investors and governments. The nexus between economic development and FDI has garnered global attention. FDI not only involves the allocation of financial resources from foreign entities but also entails technology transfer, managerial expertise, and access to international markets. While these inflows have the potential to stimulate local investment, economic growth, and job creation, concerns exist regarding their possible displacement or crowding-out effect on domestic investments. Understanding the intricate correlation between FDI and domestic investment in Brazil is of paramount importance, shaping investment policies within the country and offering valuable insights for other emerging economies seeking to strike a balance between foreign and domestic capital. This study examines the impact of FDI on domestic investment in Brazil, analyzing historical data, economic indicators, and existing literature to provide a comprehensive understanding of this complex relationship. The research draws on economic theories such as the neoclassical growth hypothesis, endogenous growth theory, and crowding-out hypothesis to explore the potential effects of FDI on domestic investment. It considers the regional disparities in FDI distribution and the sector-specific impacts of FDI in Brazil. Additionally, the study evaluates the role of government policies, trade openness, and financial development in moderating the relationship between FDI and domestic investment. Ultimately, this research aims to shed light on the multifaceted dynamics between FDI and domestic investment in Brazil. By addressing the positive and negative aspects of this relationship, it seeks to provide valuable insights for policymakers, economists, and businesses not only in the Brazilian context but also for other nations navigating the challenges and opportunities of FDI. The findings contribute to the global discourse on the impact of FDI on a nation's economic trajectory and offer guidance for informed policy decisions.

Competitive sorption of CH₄ and CO₂ on coals: Implications for carbon geo-storage

Geological carbon storage, particularly within coal seams, is recognized as a viable strategy for achieving net-zero emissions. However, following CO₂ injection into the coal seam, limited studies have addressed the competitive sorption dynamics of CH₄ and CO₂ on coal, despite the natural presence of CH₄ in these formations. In this work, sorption experiments were conducted using two types of coal: sub-bituminous coal and anthracite. Initially, pure CH4 and CO2 gases were employed to conduct individual sorption tests. Subsequently, the competitive sorption of CH4 and CO2 was evaluated using pre-mixed binary gas mixtures with varying CH4/CO2 ratios. Further, the displacement effect of CO2 on CH4 was investigated by injecting CO2 into coal samples that had been pre-adsorbed with CH4. The data reveal that, for both coals, the ideal selectivity calculated from pure gas measurements underestimates the corresponding values from real multicomponent systems. Anthracite demonstrates a higher selectivity for CO₂ over CH₄ during both adsorption and desorption processes when compared to the ideal selectivity calculated from pure gas sorption data. Conversely, the sub-bituminous coal initially shows lower selectivity for CO₂ than for CH₄ during adsorption, but this trend reverses and intensifies during desorption. If competitive sorption effects are neglected, coal selectivity for CO₂ over CH₄ under the examined conditions would be underestimated by a factor of 1.5 to 2.5. Due to the competitive sorption effects between CH₄ and CO₂, the Langmuir equilibrium constants for gas mixtures are influenced by compositional changes, leading to dynamic deviations from those observed under pure gas conditions. This finding contrasts with the traditional extended Langmuir model, which presumes that the equilibrium constants remain unchanged regardless of gas composition. In addition, the displacement study underscores the efficacy of CO2 in displacing CH4, with higher CO2 ratios intensifying displacement effects. The study highlights the substantial impact of real multicomponent scenarios on coal selectivity for CO₂ and CH₄, offering deeper insights into predicting competitive sorption behavior between CO₂ and CH₄ during CO₂-enhanced coalbed methane recovery and carbon storage processes.

Effect of specimen displacement in X-ray powder diffraction measurements with laboratory diffractometers

The effect of specimen displacement in X-ray powder diffraction experiments with laboratory diffractometers has been revisited and new expressions have been derived for several commonly used experimental configurations, including Bragg–Brentano parafocusing geometry and flat-plate transmission geometry. The results presented in this work allow the analysis of data from samples with relatively large displacements. This may open the possibility to study samples with dimensions that are difficult to accommodate with the sample-handling capabilities of standard laboratory diffractometers.

Displacement-imbibition coupling mechanisms between matrix and complex fracture during injecting-shut in-production process using pore-scale simulation and NMR experiment

Displacement-imbibition coupling oil production, which involves adjusting the operations of a well group (water injection huff and puff in one well, continuous oil production in another well), is an effective technique for enhancing oil recovery (EOR) for tight oil reservoirs. However, the research on displacement-imbibition coupling mechanisms is still missing, especially the combination of pore-scale numerical simulations and physical experiments. In this paper, a novel self-designed displacement-imbibition online nuclear magnetic resonance (NMR) experiment technique is developed. The effect of changes in fracture morphology on the mechanism of displacement-imbibition (oil saturation field and oil displacement efficiency) has been investigated. Based on the fracture morphology of physical experiments, a pore-scale model is established and solved by the finite element method. The pore-scale oil-water two-phase displacement-imbibition during the injecting-shut in-production process is simulated. The results show that the pressure oscillation makes the counter-current imbibition and co-current imbibition occur simultaneously in the matrix pores, which promotes oil recovery in matrix-fracture systems. The strength of displacement and imbibition effects is affected by the complexity of fractures. When the fracture complexity increases, the imbibition of the dense part of the fracture is stronger, while the displacement effect is weakened.

Measurement on the fatigue-healing performance of SARAs fractions in bitumen and its characterization by molecular simulations

The objective of this research was to investigate the healing characteristics of bitumen through the assessment of fatigue-healing performance of SARAs fractions and its characterization at the molecular level with SARAs fractions as the intermediate. Firstly, the flow behaviors and fatigue-healing performance of fractions were characterized by rheometer. Then, the diffusion systems were constructed and the diffusion with preset cracks was carried out, the evaluation of which was identified by density distribution, relative concentration in crack region, mean square displacement and interaction effect. The results indicate that aromatics exhibit the closest similarity to original bitumen in flowing behavior, which also reflected in the healing performance. The healing performance of resins and asphaltenes are extremely limited while that of saturates was comparable to fluid. Molecular simulation was further supporting to investigate the healing process. A platform period was found in the healing period when the molecules would move to seek the lowest energy state which was considered as healing in the alternative perspective. During the period, heavy components were more difficult to traverse while weak interaction between light components would shorten the period and identify the lowest energy state more easily, thereby greatly affecting the healing performance of fractions. Furthermore, heavy components are analogous to anchor points, among which resins were more readily aggregated and asphaltenes were relatively dispersed, while light components diffuse flexibly within them. The diffusion has the potential to drive the movement of heavy components which also kept the capture of other components, ultimately resulting in the formation of a stable healing state. The outcome with a discernible interaction effect would be important theoretical significance for the refinement of bitumen of better healing performance and the potential to influence the development of rejuvenators.

In a Stranger’s House: Social Isolation of Internally Displaced People in Ukraine During Wartime

Abstract This article explores the impact of internal displacement during wartime in Ukraine on individuals’ social isolation. This study focused on understanding and comparing feelings of isolation in two different contexts: the native community in territories temporarily occupied by Russian troops since the full-scale war and the host community. The research reveals a consistent pattern of isolation characterized by feelings of loneliness, anxiety, and emotional exhaustion among internally displaced people (IDPs), irrespective of their location. Cultural disconnection emerges as a significant factor in both settings, with war-induced changes in social norms and practices leading to a sense of alienation in native communities, and the challenge of adapting to new cultural environments in host communities. Furthermore, it highlights IDPs’ increased vulnerability to bias, stigma, and anxiety in social interactions. Overall, this qualitative study advances the understanding of the effects of displacement on social isolation and provides insights that can inform effective recovery strategies and foster a resilient, cohesive national identity in post-war contexts in Ukraine.

Mechanism study of replacing adsorbed O2 molecules in different pore sizes under different CO2/N2 inert gas conditions

Injecting inert gases into the goaf is a crucial method for inhibiting coal spontaneous combustion. Research has verified that the co-injection of CO2 and N2 provides a more effective control measure compared to a single gas, but the microscopic mechanism underlying the synergistic displacement of O2 by CO2 and N2 remains unclear. Injecting inert gases into the goaf is a crucial method for inhibiting coal spontaneous combustion. Research has verified that the co-injection of CO2 and N2 provides a more effective control measure compared to a single gas, but the microscopic mechanism underlying the synergistic displacement of O2 by CO2 and N2 remains unclear. Here, for the constructed multi-scale aperture slit model, the Grand Canonical Monte Carlo simulation (GCMC) and Molecular Dynamics (MD) simulation are used to investigate the mechanism of displacing adsorbed O2 molecules under different CO2/N2 inert gas conditions. The results indicate that CO2 and N2 aggregated on opposing sides of the coal molecules and dispersed within the slit layer, respectively. At 1 nm pore size, the relative concentration of O2 for optimal displacement was 1.054. The absolute value of the average binding energy is small when the CO2:N2 gas ratio is 80:20 and 40:60 at 2 nm and 4 nm apertures, respectively. This suggests that as the aperture size increases, the displacement effect on O2 shifts towards a higher proportion of N2, with a more conspicuous replacement effect as the aperture widens. The smaller pores ranging from 1-2 nm predominantly feature CO2 displacing adsorbed state O2, while larger pores exceeding 2 nm primarily N2 facilitate the transportation of free state O2.

Automation: Theory, Evidence, and Outlook

This article reviews the literature on automation and its impact on labor markets, wages, factor shares, and productivity. I first introduce the task model and explain why this framework offers a compelling way to think about recent labor market trends and the effects of automation technologies. The task model clarifies that automation technologies operate by substituting capital for labor in a widening range of tasks. This substitution reduces costs, creating a positive productivity effect, but it also reduces employment opportunities for workers displaced from automated tasks, creating a negative displacement effect. I survey the empirical literature and conclude that there is wide qualitative support for the implications of task models and the displacement effects of automation. I conclude by discussing shortcomings of the existing literature and avenues for future research.

The 15-minute city dilemma? Balancing local accessibility and gentrification in Gothenburg, Sweden

This article explores the relationships between gentrification and the realization of the 15-minute city vision in the city of Gothenburg, Sweden. Using unique Swedish registry micro-data, we track changes in local accessibility to urban social functions from 2011 to 2017 in neighborhoods experiencing different gentrification processes. Findings reveal a positive association between gentrification and improved local accessibility in low-income neighborhoods experiencing classic gentrification. The findings emphasize the need to balance socio-spatial polarization and 15-minute city planning, particularly in neighborhoods undergoing classic gentrification. Future studies should delve in more detail into potential displacement effects when gentrification and 15-minute city goals intersect.

Automation and Augmentation: Artificial Intelligence, Robots, and Work

This article reviews the literature that examines the potential, limitations, and consequences of robots and artificial intelligence (AI) in automation and augmentation across various disciplines. It presents key observations and suggestions from the literature review. Firstly, displacement effects from task automation continue to persist. However, one should not assume an unequivocally increasing efficacy of technology in automation or augmentation, especially given the declining productivity growth in high-income countries and some large emerging economies in recent decades. Jobs less likely to be negatively impacted are those that require diverse tasks, physical dexterity, tacit knowledge, or flexibility, or are protected by professional or trade associations. Despite countervailing effects, without policy intervention, automation and augmentation could widen inequality between social groups, labor and capital, and firms. Secondly, AI's promise in task automation and labor augmentation is mixed. AI tools can cause harm, and dissatisfaction and disengagement often arise from their opaqueness, errors, disregard for critical contexts, lack of tacit knowledge, and lack of domain expertise, as well as their demand for extra labor time and resources. The inadequate autonomy to override AI-based assessments further frustrates users who have to use these AI tools at work. Finally, the article calls for sociological research to specify conditions and mechanisms that ameliorate adverse consequences and enhance labor augmentation by embedding the study of automation and augmentation in concrete social and political contexts at multiple levels.

Effects of welding displacement and energy director thickness on the ultrasonic welding of epoxy-to-polyetherimide based hybrid composite joints

This study aimed to develop robust thermoplastic-to-thermoset composite joints upon an ultrasonic welding process. The carbon fiber/epoxy composite was topped with a layer of polyetherimide (PEI) film by a co-curing process, making it “weldable” with the carbon fiber/PEI composite. The effects of welding displacement and thickness of the energy director (ED) on the welding process of the epoxy-to-PEI hybrid composite joints were investigated. The experimental results demonstrated that an optimal welding displacement existed for the best welding quality, whose value depended on the ED thickness. Given a certain ED thickness, the lap-shear strength (LSS) of the hybrid joints increased to a maximum value and then decreased as the welding displacement increased. By optimizing the displacement and ED thickness, a maximum LSS of 39.4 MPa was obtained for the hybrid joints. In which case, the level of the defects within the welding line was minimized, and the joints failed cohesively within the composite substrates.

Analysis of the influence of circumference and displacement of the third fracture fragment on the healing of femoral shaft fractures treated with intramedullary nailing

The effect of circumference and displacement of the third fracture fragment on fracture healing after intramedullary nailing of femoral shaft fractures with a third fracture fragment was investigated. A retrospective cohort study was conducted to analyze the data of 142 patients who suffered femoral shaft fractures with a third fracture fragment and were admitted to the First People’s Hospital of Lianyungang from February 2016 to December 2021. According to the circumference of the third fracture fragments, these were divided into three types of type 1: 71 cases; type 2: 52 cases; and type 3: 19 cases. On the basis of the diaphyseal diameter, the degree of displacement of the third fracture fragment was classified into three degrees of degree I: 95 cases; degree II: 31 cases; and degree III: 16 cases. Postoperative follow-up was performed to compare the fracture healing rate, healing time, and the modified Radiographic Union Scale for Tibia (mRUST) at 9th month after surgery in each group. All 142 patients were followed up after operation, with an average of (14.7 ± 4.1) months, and the overall healing rate was 73.4%. When the third fracture fragments were displaced in degree II and III, the mRUST score at 9th month in the type 1 group was higher than that in the type 2 and 3 groups (P = 0.017). Logistic regression analysis showed that greater displacement of third fracture fragments and greater circumference were associated with lower fracture healing rates (P < 0.05). After intramedullary nailing of femoral fractures, the degree of third fragment displacement and circumference affect fracture healing, and the former has a greater impact. When the third fracture fragment is displaced to degree II or III and its circumference is type 2 or type 3, it significantly affects the fracture healing. Intraoperative intervention to reduce the distance of third displacement of the fragment is required to reduce the incidence of non-union.

Nonlinear static analysis of masonry structures with mortar joints and cracking units by optimization‐based rigid block models

AbstractA rigid block model with elasto‐plastic softening interfaces is developed for nonlinear static analysis of masonry structures subject to monotonic loading. Cracking, crushing, and shear failures are taken into account at interfaces, following a simple micro‐modeling approach. An optimization‐based formulation is used for the solution of the equation systems governing the behavior of the rigid block assemblage. A simple incremental solution procedure is implemented to take into account the material softening behavior and the effects of large displacements on equilibrium conditions. The interface models are validated against tension and shear tests on bi‐block prisms from the literature. Applications to numerical and experimental out‐of‐plane loaded masonry walls as well as to circular arches with mortar joints are presented to evaluate the effects of tensile strength and the accuracy of the developed model against responses involving P‐Δ effects. Comparisons with experimental tests on shear walls also involving cracking of the units in the failure mechanisms are finally reported to discuss the potentialities and limitations of the proposed modeling approach.

Optimization on self-assembled ultra-micro foam system for carbon dioxide flooding

Given the problem that the conventional foam injection and salt resistance are poor, the oil displacement effect is not obvious, and it is difficult to enhance oil recovery in the ultra-low permeability and high salinity reservoirs of Yanchang Oilfield, it is imperative to study a new foam flooding agent. Based on the surfactant’s self-assembled properties, foaming agent, stabilizer and complexing agent were screened in the absence of polymer and non-alkali. Three sets of self-assembly worm-like micelle systems were screened, and then a set of carbon dioxide foaming system was selected through comparative analysis: 0.50 wt% EAPMAC-12 + 0.20 wt% SDS + 0.09 wt% TEOA + 0.08 wt% EDTA. Under this condition, its viscosity, foaming volume, foam half-life and foam composite index are 18.8 mpa·s, 531 mL, 25 min and 9956 mL·min, respectively. Under the condition of the ratio of gas to liquid 3:1, the ultra-micro foam was obtained by gas–liquid co-injection in the sand pack, and the foam was round rather than the traditional pentagonal or hexagonal shape and the size was 5–31 um, indicating that the foam had good injection. Oil displacement experiment showed the average enhanced recovery rate was 12.84 % in ultra-low permeability cores, indicating that the foam had good oil displacement effect in ultra-low permeability reservoirs.

Displacement versus velocity memory effects from a gravitational plane wave

This article demonstrates that additionally to the well-known velocity memory effect, a vacuum gravitational plane wave can also induce a displacement memory on a couple of test particles. A complete classification of the conditions under which a velocity or a displacement memory effect occur is established. These conditions depend both the initial conditions of the relative motion and on the wave profile. The two cases where the wave admits a pulse or a step profile are treated. Our analytical expressions are then compared to numerical integrations to exhibit either a velocity or a displacement memory, in the case of these two families of profiles. Additionally to this classification, the existence of a new symmetry of polarized vacuum gravitational plane wave under Möbius reparametrization of the null time is demonstrated. Finally, we discuss the resolution of the geodesic deviation equation by means of the underlying symmetries of vacuum gravitational plane wave.

Application of CO2-Soluble Polymer-Based Blowing Agent to Improve Supercritical CO2 Replacement in Low-Permeability Fractured Reservoirs.

Since reservoirs with permeability less than 10 mD are characterized by high injection difficulty, high-pressure drop loss, and low pore throat mobilization during the water drive process, CO2 is often used for development in actual production to reduce the injection difficulty and carbon emission simultaneously. However, microfractures are usually developed in low-permeability reservoirs, which further reduces the injection difficulty of the driving medium. At the same time, this makes the injected gas flow very fast, while the gas utilization rate is low, resulting in a low degree of recovery. This paper conducted a series of studies on the displacement effect of CO2-soluble foaming systems in low-permeability fractured reservoirs (the permeability of the core matrix is about 0.25 mD). For the two CO2-soluble blowing agents CG-1 and CG-2, the effects of the CO2 phase state, water content, and oil content on static foaming performance were first investigated; then, a more effective blowing agent was preferred for the replacement experiments according to the foaming results; and finally, the effects of the blowing agents on sealing and improving the recovery degree of a fully open fractured core were investigated at different injection rates and concentrations, and the injection parameters were optimized. The results show that CG-1 still has good foaming performance under low water volume and various oil contents and can be used in subsequent fractured core replacement experiments. After selecting the injection rate and concentration, the blowing agent can be used in subsequent fractured cores under injection conditions of 0.6 mL/min and 2.80%. In injection conditions, the foaming agent can achieve an 83.7% blocking rate and improve the extraction degree by 12.02%. The research content of this paper can provide data support for the application effect of a CO2-soluble blowing agent in a fractured core.

Self-focusing morphology of juxtaposed double-ring Airyprime-Gaussian beam arrays

In this paper, the variation of self-focusing morphology and focusing interval of a juxtaposed double-ring Airyprime-Gaussian beam array (JDAPGBA) is investigated by changing the proportionality coefficient between the transverse displacements of the outer and the inner rings β. When β increases within a certain range, the JDAPGBA will change from a single self-focusing to the first self-focusing from the inner ring and the second self-focusing from the outer ring, accompanied by the gradual increase of the focusing interval. As β increases, the self-focusing ability of the inner ring is initially weaker than that of the outer ring, and then the self-focusing ability of the inner ring increases. In contrast, the self-focusing ability of the outer ring weakens until the two self-focusing skills are equal to each other. The generation of the double self-focusings of the JDAPGBA is explained in terms of the physical mechanism. In addition, the effects of the transverse displacement of the inner ring din and the distribution factor g on the focusing interval of the JDAPGBA are analyzed in detail. If din increases, the focusing interval also increases, both self-focusing abilities enhance, and the modulation range of β decreases as well. If the distribution factor g increases, the focusing interval rises, both self-focusing abilities weaken, the modulation range of β increases as well. Finally, the correctness of the above conclusions is confirmed by the experimental measurements of the self-focusing properties of the JDAPGBA. The above research provides a new scheme on how to generate double self-focusings and freely change the focusing interval, as well as new insights into the practical application of juxtaposed double-ring self-focusing beam arrays.

The Effect of First Metatarsal Shortening and Sagittal Displacement on Forefoot Pressure in Minimally Invasive Hallux Valgus Correction.

Minimally invasive (MIS) treatment of hallux valgus (HV) deformity is increasing in popularity. A 2-mm diameter burr is used to create a distal first metatarsal osteotomy prior to capital fragment translation and fixation. The metatarsal will shorten by the burr's diameter (2 mm). Plantar or dorsal capital fragment displacement may also cause load transference and possibly transfer metatarsalgia. The purpose of this study is to examine the effect of MIS HV on forefoot loading mechanics with respect to metatarsal shortening and sagittal plane displacement. Four lower-limb cadaveric specimens were studied. A pedobarography pressure-sensing mat was used to record forefoot plantar pressure in a controlled weight-bearing stance position. Control and postosteotomy measurements were obtained with the capital fragment fixated in 3 possible positions: 0 mm, 5 mm dorsal, and 5 mm plantar displacement. Pedobarography data yielded pressure data within measurable graphical depictions. Raw mean contact pressure measurements were taken under the first and fourth metatarsal heads to establish medial and lateral forefoot loading pressure ratios. An a priori power analysis was performed based on previous peer-reviewed pedobarographic data, and our study was adequately powered. Around 40 measurements were recorded, and ratios of medial-to-lateral forefoot loading were constructed. Medial forefoot pressure control versus 0 mm displacement, and control versus dorsal displacement were not found to be statistically significant (p = 0.525, p = 0.55, respectively). Medial pressure significantly increased when comparing control versus plantar displacement (P = .006). Lateral pressure significantly increased with dorsal displacement of the osteotomy (P = .013). Our study found that MIS HV correction did not cause an increase in lateral forefoot pressure loading when sagittal plane displacements were controlled. Plantar displacement increased medial loading, and dorsal displacement increased lateral loading. It may be valuable for surgeons to consider metatarsal head position postosteotomy, as a decrease in medial loading and subsequent increase in lateral loading may lead to lateral forefoot pain and transfer metatarsalgia. IV.

Exploring the Macroevolutionary Signature of Asymmetric Inheritance at Speciation.

Popular comparative phylogenetic models such as Brownian Motion, Ornstein-Ulhenbeck, and their extensions, assume that, at speciation, a trait value is inherited identically by two descendant species. This assumption contrasts with models of speciation at a micro-evolutionary scale where descendants' phenotypic distributions are sub-samples of the ancestral distribution. Different speciation mechanisms can lead to a displacement of the ancestral phenotypic mean among descendants and an asymmetric inheritance of the ancestral phenotypic variance. In contrast, even macro-evolutionary models that account for intraspecific variance assume symmetrically conserved inheritance of ancestral phenotypic distribution at speciation. Here we develop an Asymmetric Brownian Motion model (ABM) that relaxes the assumption of symmetric and conserved inheritance of the ancestral distribution at the time of speciation. The ABM jointly models the evolution of both intra- and inter-specific phenotypic variation. It also infers the mode of phenotypic inheritance at speciation, which can range from a symmetric and conserved inheritance, where descendants inherit the ancestral distribution, to an asymmetric and displaced inheritance, where descendants inherit divergent phenotypic means and variances. To demonstrate this model, we analyze the evolution of beak morphology in Darwin finches, finding evidence of displacement at speciation. The ABM model helps to bridge micro- and macro-evolutionary models of trait evolution by providing a more robust framework for testing the effects of ecological speciation, character displacement, and niche partitioning on trait evolution at the macro-evolutionary scale.