Blast Effects Research Articles

Professional Whats App Blast: Best practice direct digital marketing 4.0 to improve students’ religious moderation implementation

There were no final literatures both national and international research concerning direct digital marketing of religious moderation using application. One of the solutions for direct digital marketing of religious moderation is using professional Whats App Blast. The study was conducted to determine the effect of professional Whats App Blast to improve the implementation of religious moderation. Mixed method acts as a method in this research. Data collection techniques using tests and interviews. The number of sample is 150 students from three campuses in West Java Province. Random sampling technique was used as a sampling technique. The calculation of data analysis shows that Asymp. Sig. (2-tailed) =0.000 less than Asymp. Sig. (2-tailed) <0.05 which means H0 is rejected. The results of the data analysis are reinforced by the calculation of the average value after the post test is higher than the pre test. The average student pre test is 52.53, while the average student after post test is 74.77. In addition, the author took other strength data from interviews. In conclusion, Professional Whats App Blast has a very positive contribution in improving the implementation of religious moderation of students in West Java Province. The next researcher is recommended to use other social media platforms besides Professional WA Blast and also the religious moderation information content is not limited to flyers.

Stress interaction and crack penetration mechanism between slit charge blasting holes in high in-situ stress rock mass

Abstract The research primarily focuses on the stress interaction between boreholes in slit charge blasting and the crack penetration mechanism. It thoroughly explores the impact of these stress interaction on crack propagation and analyzes the blasting stress wave evolution between boreholes and characteristics crack propagation characteristics. First, numerical simulation was run to look into the inter-borehole stress interaction mechanisms. Results indicate that stress wave interaction between boreholes promotes the formation and extension of radial directional cracks. However, interactions between the stress fields at crack tips and the stress wave from adjacent boreholes, as well as between crack tip stress fields themselves, negatively affect the connectivity of radial cracks between boreholes. Furthermore, the study also examines how in-situ stress and borehole spacing affect crack connectivity between boreholes. Simulation findings indicate that in-situ stress weakens hoop tensile stress between boreholes, hindering crack connectivity and suppressing the slit charge's directed blasting impact. Reducing borehole spacing can improve crack connectivity between boreholes. However, reducing spacing can negatively impact the directional blasting effect, potentially compromising surrounding rock stability. Finally, Response Surface Methodology (RSM) was used to analyze the effects of borehole spacing and in-situ stress on crack penetration, and a predictive model was constructed. Based on this, the study provides a theoretical foundation and scientific reference for the optimization of slit charge blasting parameters under high in-situ stress conditions.

Machine learning-driven power prediction in continuous extrusion of pure titanium for enhanced structural resilience under extreme loading

The increasing demand for advanced materials capable of withstanding extreme loading conditions, such as those encountered during impact or blast events, underscores the need for innovative approaches in material processing. This study focuses on leveraging machine learning (ML) to enhance predictive accuracy in the continuous extrusion of CP-Titanium Grade 2, a material vital for structural resilience in critical applications. Specifically, an Artificial Neural Network (ANN) model optimized using Stochastic Gradient Descent (SGD) was introduced to forecast power requirements with high precision. The analysis utilized a published dataset that comprises theoretical, numerical, and experimental power calculations as a robust foundation for validation and comparison. A visualization highlighted the influence of process parameters, such as feedstock temperature and extrusion wheel velocity, on structural performance to align with the thematic focus of resilient material design. The ANN-SGD model achieved an RMSE of 0.9954 and a CVRMSE of 11.53% which demonstrated significant improvements in prediction accuracy compared to traditional approaches. By achieving superior alignment with experimental results, the model validated its efficacy as a reliable and efficient tool for understanding and optimizing complex manufacturing processes. This research emphasizes the potential of ML to revolutionize material processing for extreme conditions and contribute to the broader goals of structural resilience and sustainable manufacturing.

Effect of floor acceleration on occupant’s lower limb injury and its protective measures study

The floor acceleration under a vehicle under-belly blast will directly endanger the safety of the occupant’s lower limbs. A novel lower limb protection device was proposed to reduce the damage to the occupant’s lower limbs during a blast event. First, a local equivalent model of the occupant-restraint system was established, and drop impact tests validated its accuracy. Then, taking the triangular wave as an example, the influence laws of velocity difference, pulse peak, and pulse width on the occupant’s lower limb injury were investigated to guide the design of lower limb protection devices. On this basis, a novel lower limb protection device was proposed, and structural parameter sensitivity analysis was carried out. Finally, structural optimization has been carried out to further improve the protection performance of the lower limb protection device. The results showed that the proposed new lower limb protection device could effectively reduce the impact acceleration transmitted to the occupant’s feet and provide effective protection for the occupant’s lower limbs. Compared with the initial design, the optimized lower limb protection device reduced the left and right lower tibial peak forces by 26.19% and 29.32%, respectively, and the total mass decreased by 50.7%.

Glial activation and nociceptive neuropeptide elevation associated with the development of chronic post-traumatic headache following repetitive blast exposure.

Chronic headaches and pain are prevalent in those who are exposure to blast events, yet there is a gap in fundamental data that identifies the pathological mechanism for the chronification of pain. Blast-related post-traumatic headaches (PTH) are understudied and chronic pain behaviors in preclinical models can be vital to help elucidate PTH mechanisms. The descending pain modulatory system controls pain perception and involvesspecific brain regions such as the cortex, thalamus, pons, and medulla. In this study, male rats were exposed to repeated blast events to induce traumatic brain injury (bTBI) and subsequently assessed for the development of PTH by testing for chronic pain behaviors and examining the neuropathology of the descending pain pathway. The results demonstrated that facial hypersensitivity developed as early as week two following bTBI and persisted throughout the study (12weeks). Depressive-like behaviors were observed at 12weeks following bTBI, and these behaviors were associated with neuropathologies such as microglia ramification and neuropeptide elevation (Calcitonin Gene-Related Peptide, CGRP; Substance P, SP). Overall, these findings support the hypothesis that bTBI causes the activation of microglia and elevation of neuropeptides, which contribute to the development of chronic PTH behaviors.

Методические вопросы комплексной оценки дробящего и техногенного действия взрывных работ при открытой разработке месторождений

Current conditions of mining mineral deposits are characterized with raising requirements towards the environmental consequences of production, as well as increasing volumes of works near settlements, increasing unit capacity of the mining equipment and the volumes of simultaneously blasted rock mass. In this connection the importance of research into the development of energy-efficient technologies of the rock crushing processes and the search for safe methods of their intensification with the minimal harmful effects of large-scale blasting is increasing. The article presents specific methodical features of complex assessment of crushing and man-induced effects of blasting operations in conditions of a test ground and on those of an open pit wall, as well as methodical aspects of calculating the energy spent on seismic action of the blast and air shock wave. The results are provided of systematizing the methods to control the blast seismic action. The results of a comparative assessment of the dust and gas cloud density and its height change in time are discussed with reference to the application of different granulated commercial explosives. A methodological approach is shown to the integrated assessment of the crushing and man-induced effects of blasting operations in open-pit mining.

Study on the Influence of Notched Empty Hole Parameters on Directional Fracture Blasting Effect

Placing empty holes between charging holes is widely used in blasting engineering to achieve directional fracture blasting. Studies have shown that the presence of a notch along the empty hole wall enhances stress concentration and supports improved control over crack propagation. The notch angle and length are the two main parameters influencing the impact of notch holes. Therefore, in this study, we used numerical simulations to investigate how varying notch angles and lengths influence the directional fracture blasting effect. The findings suggest that, among the different types of holes used in directional fracture rock blasting, notched empty holes have the most significant guiding effect, followed by empty holes, while the absence of empty holes yields the least effective results. In the directional fracture blasting of a notched empty hole, stress concentration occurs at the notch tip following the explosion. This alters the stress field distribution around the empty hole, which shifts from a compressive to a tangential tensile state. Additionally, this concentration of stress causes the explosion energy to be focused on that location, resulting in a directional fracture blasting effect. In blasting construction, selecting the appropriate notch hole parameters is necessary to achieve optimal effects and reduce damage to surrounding rocks. Based on the notch parameters assessed in this study, the optimal effect of directional fracture blasting is achieved when the notch angle is 30°.

Neuroprotective Effects of Functionalized Hydrophilic Carbon Clusters: Targeted Therapy of Traumatic Brain Injury in an Open Blast Rat Model.

Multiple biochemical cascades are triggered by brain damage, resulting in reactive oxygen species production alongside blood loss and hypoxia. However, most currently available early antioxidant therapies lack capacity and hence sufficient efficacy against TBI. The aim of this study was to test a novel catalytic antioxidant nanoparticle to alleviate the damage occurring in blast TBI. TBI was elicited in an open blast rat model, in which the rats were exposed to the effects of an explosive blast. Key events of the post-traumatic chain in the brain parenchyma were studied using immunohistochemistry. The application of a newly developed biologically compatible catalytic superoxide dismutase mimetic carbon-based nanocluster, a poly-ethylene-glycol-functionalized hydrophilic carbon cluster (PEG-HCC), was tested post-blast to modulate the components of the TBI process. The PEG-HCC was shown to significantly ameliorate neuronal loss in the brain cortex, the dentate gyrus, and hippocampus when administered shortly after the blast. There was also a significant increase in endothelial activity to repair blood-brain barrier damage as well as the modulation of microglial and astrocyte activity and an increase in inducible NO synthase in the cortex. We have demonstrated qualitatively and quantitatively that the previously demonstrated antioxidant properties of PEG-HCCs have a neuroprotective effect after traumatic brain injury following an explosive blast, acting at multiple levels of the pathological chain of events elicited by TBI.

Numerical Analysis of Explosion-Induced Deformations on Steel Panels in Urban Environments

Explosion proof structures are designed to be very heavy and non-functional using conventional systems so that they can be resistant to blast effects. As a result, not only the emergence of non-economic structures, but also their operational performance decreases. To effectively mitigate these challenges, a substantial body of research has focused on the development and application of designs and materials specifically engineered to withstand explosive load impacts. In this study, the strength of steel plates under explosives with different energies was tested. Related tests were performed using Ls-Dyna finite element software. An experimental literature was used to calibrate the numerical model. When the results obtained as a result of the calibration were compared with the experimental data, a high level of agreement was obtained. The calibrated numerical model was subjected to burst loads by varying the panel thicknesses and its dynamic responses were simulated. The displacement values were analyzed by placing the explosives equidistant from the panel centers. By comparing the analysis results, explosive energies were compared. The most effective explosive types could be listed according to the amount of change that the evaluated explosives in the same amount caused on the panel surfaces. In line with these studies, information will be gained about what type of steel materials will be used against which type of explosives in areas that need to be protected in urban areas.

A Study on the Impact of Different Delay Times on Rock Mass Throwing and Movement Characteristics Based on the FEM–SPH Method

Burst morphology is a crucial indicator for evaluating the effectiveness of blasting, as it directly reflects the actual state of the blasting results. The results of rock displacement following blasting partially reflect the effectiveness of throw blasting, while the rock ejection process serves as the macroscopic manifestation of the blasting method. To accurately assess the impact of different delay times on burst formation, this study addressed the issues of rock movement and ejection in underground blasting. Using three-dimensional modeling, we constructed a FEM–SPH model and utilized LS-DYNA numerical simulation software to investigate the movement patterns of rock in precise delayed blasting scenarios underground. This study explored the spatiotemporal evolution characteristics of rock movement post-blasting. Digital electronic detonators were used to set precise inter-row delay times of 25 ms, 50 ms, and 75 ms. The results revealed that the ejection distance of blasted rock in underground mining increased with longer inter-row delay times, while the slope angle of the blasted muck pile decreased as the delay time increased. Furthermore, at a micro level, the study found that a 75 ms delay created new free surfaces, providing effective compensation space for subsequent blasts, thereby improving blasting outcomes. Analysis of the 25 ms and 50 ms delay periods indicated a clamping effect on rock movement. Field comparisons of blasting results were conducted to validate the influence of precise delay times on the movement patterns and spatiotemporal evolution characteristics of blasted rock.

Internal Blast Effect Reduced by Dust Created by Fragments

ABSTRACTThe attenuation effect on pressure and impulse of the metallic casing of an explosive charge, namely, Fano's effect, is a well‐known phenomenon thanks to the founding works of Fano and Fisher. It is mainly attributed to the kinetic energy transferred from the high explosive (HE) to the casing. Later, few authors quantified the contribution of secondary mechanisms to this phenomenon, such as the yield stress of the metal, see, for example, Hutchinson. More recently, Baum et al. and Ohrt have suggested an additional attenuation effect when the detonation of cased charges occurs inside closed or vented rooms. The metallic debris produced by the fragmentation of the envelope strikes the walls, generating secondary debris and dust. This later consumes energy (kinetic and thermal) from the detonation products, implying a decrease in the apparent pressure and impulse. The present work experimentally verifies this phenomenon thanks to cylindrical bare and cased charges of various HE types and mass detonating at the center of a small‐scale vented concrete building. Internal impulses are estimated by several measurement methods, which all evidence that the impulse decrease endorsed by the secondary dust is highly significant. It is indeed of the same order of magnitude that the impulse diminution attributed to Fano's effect. These results may pave the way for a better insight into internal detonation effects, particularly for safety studies on munition storage.

Relationship between blasting operation and slope stability: a case study at Borneo Indo Bara open pit coal mine

Bench blasting is commonly used in open-pit coal mines because it effectively increases coal production and aids in overburden removal. However, uncontrolled blasting can generate significant vibrations and accelerations, which may lead to slope failure if the magnitude of permanent displacement exceeds its critical value. A prevalent method for calculating the dynamic factor of safety (FoS) of a slope due to blasting is the pseudo-static approach; however, this method tends to be overly conservative. In this study, we utilized Newmark’s sliding block method and the strength reduction factor (SRF) to assess the dynamic FoS of slopes by evaluating the permanent displacement caused by bench blasting. We based our seismic input on a complete vibration waveform obtained through signature hole analysis of a specific bench blast design. The dynamic FoS was defined as the SRF threshold that resulted in a critical slope displacement of 50 mm. The case study was conducted at Borneo Indo Bara, one of Indonesia’s largest open-pit coal mines located in South Borneo Province. We analyzed four sidewall slopes that were subjected to repeated blasting events. The results indicated that the slope’s LOM design could tolerate blasting vibrations corresponding to a peak particle acceleration (PPA) of up to 0.41 g, which yielded a dynamic FoS of 1.35. This value is significantly higher than the pseudo-static approach, which indicated a pseudo-static FoS of 1.04 for a PPA of 0.12 g. Furthermore, this study assists mining practitioners in predicting the allowable number of blast events to prevent slope failure and recommends avoiding blast events with a scaled distance of less than 8 m/kg1/2 to prevent sudden slope failures. In conclusion, the study highlights the importance of the integrated approach that combines signature hole analysis, Newmark’s sliding block method, and the SRF approach for evaluating the dynamic FoS of mine slopes subjected to bench blasting. The results of this study can offer valuable insights for mining engineers engaged in bench blasting to adopt the proposed integrated approach, which is still overlooked in Indonesia’s open pit blasting practices.

Vulnerability of structures designed with seismic provision due to explosions in mines

The effect of blast-induced ground vibration on structures was examined. The aim was to investigate the extent to which the strength attributed by seismic design can resist the effect of mine blasts, as both earthquakes and blasts generate lateral forces. The study was conducted to see whether and how blasts can be controlled such that seismic design of structures may suffice the purpose of withstanding mine blasts. The responses in the elastic and post-elastic regions were compared for implementation of the concept of performance-based design. The responses of structures were investigated for both single and sequential blasts. The results showed that sequential blast events are more damaging than earthquakes. On the other hand, medium- and long-period structures under a single blast event can withstand blast-induced vibration if designed as per seismic provisions. To safeguard structures under sequential blasts, it is recommended that the number of blast events is controlled. The safety of structures under blast can be determined by knowing the additional strength attributed from the seismic effect. This may help to decide whether separate design provisions for blast-induced ground motion are needed.

Study on Influencing Factors of Liquid Carbon Dioxide Blasting in Rock Cutting

Background:: At present, although some scholars have studied liquid carbon dioxide blasting, there are still some problems to be solved, such as the influencing factors of the liquid carbon dioxide blasting effect. Based on the project of Jiu’e railway, this paper studies the influencing factors of liquid carbon dioxide blasting in rock cutting. Objective:: The study aims to show the influence of different blasting hole depths and jet directions on the effect of liquid carbon dioxide blasting and fracture development. Methods:: Considering the influence of jet direction and different blasting hole depth on liquid carbon dioxide blasting in rock cutting, the fracture development law at different blasting hole depths is analyzed, the stress characteristics of jet direction and non-jet direction are discussed, and fracture development process is analyzed in detail from the viewpoint of energy. Moreover, related patents on liquid carbon dioxide blasting devices are also reviewed. The research on law of fracture development and optimal blasting hole depth is the highlight of this paper. Results:: The influence of different blasting hole depths, jet directions on effect of liquid carbon dioxide blasting and fracture development is analyzed, When the depth of blasting hole is 2.5 m, the fractures can extend to bench surface but cannot extend to the bottom of the excavation surface. When the hole depth is 5.0 m, the fractures cannot extend to the bench surface. The fractures can be extended to the bottom of the excavation face and the bench surface when the blasting hole depth is 4.0. Moreover, the liquid carbon dioxide blasting can effectively blast the rock cutting, and the optimal blasting hole depth is 4m. Conclusion:: Through the analysis results, considering the influencing factors of fracture number, fracture length and consumption of blasting energy, a blasting hole depth of 4m is considered the best option.

Three-dimensional peridynamic modeling of damage and penetration in composite plates exposed to localized explosive blasts

Localized failures in composites can lead to catastrophic consequences in some vehicles and systems, such as airplanes and submarines. The paper presents a new three-dimensional (3D) peridynamic model to explore the localized explosive effects on composite plates. The study utilizes the peridynamic method to simulate fractures and deformations in composite plates when exposed to localized explosive blasts. Accurate prediction of composites' performance during explosive blast events is crucial in the design process to avoid the deadly effects of their failures. This study highlights the following novelties: (1) We present, for the first time, a novel 3D mesh-free model to simulate the fracture and damage behavior of composite plates when exposed to explosive blasts; (2) The adopted numerical modeling technique enables highly efficient simulations of fractures and failures in composites when compared with other mesh-based numerical models; (3) We introduce a new mathematical framework to reflect the explosive pressure loads through different composite layers; (4) The study provides an accessible and efficient tool for engineers and researchers to enhance the design of composites in several industries instead relying on limited-access commercial software packages. In addition to the previous novelties, the paper presents a new parametric study that investigates the performance of several composite plates, such as titanium-aramid and aluminum-aramid composites, in explosive blast scenarios. Moreover, the roles of explosive mass and plate thickness in the failure mechanisms of composites are examined.

Dynamic behavior analysis of steel, aluminum, and composite plates under extreme air blast loadings

The number of terrorist air blast attacks is increasing in a catastrophic way in the current era. However, the selection of material is a crucial task for designing a high-blast-mitigating protective structure. The experimental evaluation of the dynamic responses of various materials under a blast event is highly costly, with many restrictions and environmental pollution. Therefore, to avoid these difficulties, the current study demonstrated a series of dynamic explicit analyses to determine the dynamic responses of the plate structure of various materials and equal masses under air blast loads of 1–3 kg trinitrotoluene (TNT) at 300 mm stand-off distance (SoD). These loads were applied by using the Convention Weapons Effect Program (CONWEP). To correctly predict the mutilation behavior of metallic plates, the Johnson-Cook (J-C) material model was used, and to determine the damage behavior of composite plates, Hashin and Puck-Schurmann criteria were used. The Puck-Schurmann criterion was implemented via user defined VUMAT subroutine. These numerical approaches were first verified with the validations of the literature’s experimental results. To characterize the various plates’ blast mitigation capacity, their mid-point deflection, radial deflection at the instant of peak mid-point deflection, kinetic energy, internal energy, and damage patterns were compared. The influence of applied blast loads on the pressure and impulse variations on the plates has also been investigated. Findings of the analysis showed that the aluminum plate has the highest non-residual deflection resistance, and the composite plate had a maximum energy absorption characteristic under the air blasts.

Optimization of high performance hybrid composite under ballistic test and performance of the hybrid composite under IED blast

Abstract In this investigation a novel material has been developed comprising of Silicon Carbide (ceramic), Aluminium honeycomb (metal) and Poly Ether Ketone (PEK)—Poly Phynelene Benzobisoxaole (PBO) fiber based blast proof composite. The experimental results proved that this polymeric composite is highly suitable for 9 mm pistol bullet with 430 m s−1 at distance of 5 m as well as for improvised explosive devices blast to absorb the sharpnels/splinters. This investigation also highlights an efficient back layer for a blast-proof sandwich composite. Layer optimization was carried out by finite element method (FEM) analysis of blast effect on the multi-layer polymer composite panel by ANSYS Explicit Dynamics (LS DYNA Solver). The resultant optimal layers of PEK-PBO composites then tested to validate results of FEM analysis. Experimentally it is proved that polymeric composite with 10 layers of PBO fabric when test fired under 9 mm pistol bullet with 430 m s–1 at distance of 5 m, the bullet penetrates, however, when the polymeric composite is made with a total of 20 layers of PEK-PBO fabric, all the test fired bullets are stopped. Therefore, under SNANAG 4569 blast test, the polymeric composite was essentially made with 20 layers of PBO fabric and it is experimentally proved that PEK-PBO composite is highly efficient as the back layer of hybrid composite and all the sharpnels of IED blast are completely absorbed.

Development of a dynamic cumulative damage model and its application to underground hydropower caverns under multiple blasting

Underground infrastructures are crucial for resource extraction, energy storage, and space utilisation. The geomaterials that make up these structures, such as rock and concrete, are subjected to multiaxial stress conditions and are frequently exposed to dynamic and extreme loadings caused by both natural disasters and human activities. These stresses are particularly significant during the construction phase, which involves operations such as drilling and blasting excavation, as well as during the operational phase, which may include events like explosions. For instance, while drilling and blasting induce rock breakage within the excavated profile as designed, they inevitably lead to the formation of a damage zone in the surrounding rock mass. Moreover, the cumulative effects of sequential excavations and multiple blasts can cause significantly greater damage, thereby threatening the stability of tunnel structures during the operation phase. This paper highlights the importance of thoroughly analysing these phenomena during both static and dynamic loadings to ensure the stability of underground infrastructures. To address these challenges, a rate-dependent damage constitutive model is proposed for geomaterials to assess the impacts of blasting loads and the cumulative damage resulting from repeated blasts. The model is conceptualised using the strength envelope of loading-unloading curves to represent the progressive accumulation of damage under repeated impacts. Through theoretical derivation, a dynamic cumulative damage model is developed, based on a modified Mohr-Coulomb strain-softening model incorporating rate-dependent parameters, and is validated against dynamic experimental data. The model captures the transition between static strain-softening and dynamic cumulative damage, triggered by a critical strain-rate threshold. The applicability of the model is demonstrated through simulations of tunnel excavation, emphasising the impact of blasting loads and the accumulation of damage zones. To assess its practical feasibility, the developed model is applied to simulate different excavation scenarios for an underground hydropower cavern. Damage in the surrounding rock mainly results from static unloading and/or dynamic disturbances. Blasting construction, in particular, causes significant damage in tunnel intersection zones and the connecting areas of two benches, leading to increased displacement and higher damage levels compared to static excavation. To mitigate excessive damage while maintaining the construction timeframe, it is recommended to consider alternating cycles of dynamic loading and static excavation unloading continuously, which helps understand damage formation in critical zones without significantly delaying project completion.

The entanglement of fusion energy research and bombs

ABSTRACT The recent achievement of fusion ignition—meaning more energy came out of a self-sustaining fusion reaction than was put in—at Lawrence Livermore National Laboratory’s National Ignition Facility has brought to the fore long-simmering questions about whether certain experiments violate the Comprehensive Test Ban Treaty on nuclear explosions. Fusion research for peaceful use and military use are highly intertwined, despite attempts to cloak nuclear weapons with the aura of the so-called “peaceful atom.” Ignition has been achieved, but there is still a remarkable silence around whether pure fusion weapons—weapons that could kill large numbers of humans with neutron radiation but have blast effects much smaller than current thermonuclear weapons—are an objective of the overall program. Even if not an explicit objective, would they be built if fusion technology makes them feasible?

Structural response of steel-concrete composite panels to near field simultaneous blast and fragmentation loading

Steel-concrete composite sandwich panels are used in blast doors or blast walls to protect personnel and equipment in explosive environments due to their superior performance against blast effects. In the design of such panels, most design methods treat blast and fragment loading independently for far-field explosions. However, the synergistic effects of combined blast and fragments loading should be accounted for in close-in explosion scenarios. In this study, a field test program was conducted to assess the damage of the steel-concrete composite panels subjected to close-in explosion of cased charges at various scaled distance between 0.39 and 0.78 m/kg1/3. Characterization test of cased charge detonation was performed to explore the combined loading effect. The analysis includes the pressure-time history from the cased charge detonation, distribution of the fragment masses and velocities over the test panels. The structural damage and response of the composite panels against the combined loading effects was measured. The results indicated that in addition to the damage from the blast wave, the panel was remarkably damaged by the fragment impact. Despite the significant structural damage, the panels maintained its structural integrity after the tests. Additionally, quasi-static load tests were conducted on the panels to quantify their load resistant differences in pristine condition and various damaged conditions due to the explosive effects.