Effects Of Black Carbon Aerosols Research Articles

Changes in the Direct Climate Effect of Black Carbon Aerosols in East Asia Under the “Dual Carbon” Goal of China

AbstractIn the context of China's “dual carbon” goal, emissions of air pollutants are expected to significantly decrease in the future. Thus, the direct climate effects of black carbon (BC) aerosols in East Asia are investigated under this goal using an updated regional climate and chemistry model. The simulated annual average BC concentration over East Asia is approximately 1.29 μg/m3 in the last decade. Compared to those in 2010–2020, both the BC column burden and instantaneous direct radiative forcing in East Asia decrease by more than 55% and 80%, respectively, in the carbon peak year (2030s) and the carbon neutrality year (2060s). Conversely, the BC effective radiative forcing (ERF) and regional climate responses to BC exhibit substantial nonlinearity to emission reduction, possibly resulting from different adjustments of thermal‐dynamic fields and clouds from BC‐radiation interactions. The regional mean BC ERF at the tropopause over East Asia is approximately +1.11 W/m2 in 2010–2020 while negative in the 2060s. BC‐radiation interactions in the present‐day impose a significant annual mean cooling of −0.2 to −0.5 K in central China but warming +0.3 K in the Tibetan Plateau. As China's BC emissions decline, surface temperature responses show a mixed picture compared to 2010–2020, with more cooling in eastern China and Tibet of −0.2 to −0.3 K in the 2030s, but more warming in central China of approximately +0.3 K by the 2060s. The Indian BC might play a more important role in East Asian climate with reduction of BC emissions in China.

The direct effects of black carbon aerosols from different source sectors in East Asia in summer

Black carbon (BC) aerosol is a significant, short-lived climate forcing agent. To further understand the effects of BCs on the regional climate, the warming effects of BCs from residential, industrial, power and transportation emissions are investigated in Asian regions during summer using the state-of-the-art regional climate model RegCM4. BC emissions from these four sectors have very different rates and variations. Residential and industrial BCs account for approximately 85% of total BC emissions, while power BCs account for only approximately 0.19% in Asian regions during summer. An investigation suggests that both the BC aerosol optical depth (AOD) and direct radiative forcing (DRF) are highly dependent on emissions, while the climate effects show substantial nonlinearity to emissions. The total BCs AOD and clear-sky top of the atmosphere DRF averaged over East Asia (100–130°E, 20–50°N) are 0.02 and + 1.34 W/m2, respectively, during summer. Each sector’s BC emissions may result in a warming effect over the region, leading to an enhanced summer monsoon circulation and a subsequent local decrease (e.g., northeast China) or increase (e.g., south China) in rainfall in China and its surrounding regions. The near surface air temperature increased by 0.2 K, and the precipitation decreased by approximately 0.01 mm/day in east China due to the total BC emissions. The regional responses to the BC warming effects are highly nonlinear to the emissions, which may be linked to the influences of the perturbed atmospheric circulations and climate feedback. The nonuniformity of the spatial distribution of BC emissions may also have significant influences on climate responses, especially in south and east China. The results of this study could aid us in better understanding BC effects under different emission conditions and provide a scientific reference for developing a better BC reduction strategy over Asian regions.

Dust impacts on radiative effects of black carbon aerosol in Central Asia

The radiative effect of mineral dust and black carbon aerosol are investigated with aerosolclimate model simulations with fixed sea surface temperatures as boundary condition. The semi-direct effects of the absorbing aerosol are assessed as the residual between the total direct radiative effect and the instantaneous direct radiative effect of the aerosol species. For Central Asia the presence of mineral dust aerosol below a black carbon aerosol layer enhances the positive radiative effect of the black carbon aerosol.

Studies on the Climate Effects of Black Carbon Aerosols in China and Their Sensitivity to Particle Size and Optical Parameters

In this paper, based on the principle of Mie scattering, we calculated the optical parameters of BC aerosols at different scales and then applied the new optical parameters to simulate the BC aerosols concentration distribution, radiative forcing, and their climate effects. We also compared the results of optical parameters of BC aerosols with homogeneous scales and analyzed the effect on climate. Compared with the conventional uniform-scheme optical parameterization, the concentrations of the first mode of BC aerosols simulated with the optical parameters that were recalculated based on the particle size are significantly higher, while the concentrations of the other modes and the total of BC aerosols are lower. In the respective of statistics, the changes of column burdens of BC in four modes are 0.085, −0.095, −0.089, −0.054 mg/m2. The clear-sky TRF of BC are weakened in the value of 0.03 W/m2 averaged over the domain, while the all-sky TRF of BC are enhanced of 0.06 W/m2 in general. The warming effect of BC becomes weaker when using the new scheme by −0.04 K to −0.24 K. When using the new optical parameters scheme, the regional average surface concentrations of BC in four modes are 0.372, 0.264, 0.055 and 0.004 μg/m3, respectively. Especially, the first and the second mode account for as large as 53% and 38%. The surface concentration and column burden of total BC are 0.69 μg/m3 and 0.28 mg/m2 can be dropped. The regional average direct RFs of BC at the top of the atmosphere are 0.49 W/m2 under clear-sky and 0.36 W/m2 under all-sky averaged over the domain. Over most areas of central China, North China, and East China, BC may increase the temperature in a range of 0.05∼0.15 K, while over South China, BC shows cooling effect. In average, the precipitation variations caused by BC over East China, North China, South China, and Northeast China are −0.83, −0.05, −0.11, and −0.13 mm/d, respectively. As a whole, the variations of circulation, pressure, and temperature show a good correspondence.

Large-Scale Modeling of Absorbing Aerosols and Their Semi-Direct Effects

Radiative effects of absorbing black carbon and mineral dust aerosols are estimated from global aerosol climate model simulations with fixed sea surface temperatures as a boundary condition. Semi-direct effects are approximated as the residual between the total direct radiative effect and the instantaneous direct radiative effect of the simulated absorbing aerosol species. No distinction is made for aerosols from natural and anthropogenic sources. Results for global average are highly uncertain due to high model variability, but consistent with previous estimates. The global average results for black carbon aerosol semi-direct effects are small due to cancellation of regionally positive or negative effects, and may be positive or negative overall, depending on the model setup. The presence of mineral dust aerosol above dark surfaces and below a layer containing black carbon aerosol may enhance the reflectivity and act to enhance the positive radiative effect of black carbon aerosol. When mineral dust is absent the semi-direct effect at the top-of-atmosphere of black carbon aerosol from both anthropogenic and natural sources is −0.03 Wm−2, while averaging to +0.09 Wm−2 if dust is included.

Radiative effect of black carbon aerosol on a squall line case in North China

The radiative effect of black carbon aerosol (BC) on a squall line case in north China is studied with the Weather Research and Forecasting model. Before the initiation of the squall line, the surface-emitted BC is mixed only in the boundary layer (BL). BC is then transported from the BL into the free troposphere by the updrafts in the squall line system. Once distributed in the atmosphere, BC absorbs solar radiation and heats the surrounding air. The maximum increase of temperature is 0.05K for the moderately polluted case bc2 and 0.37K for the heavily polluted case bc20. In case bc2, where the BC concentration is not very high, the solar flux reaching the surface, the sensible heat flux, and the latent heat flux are not significantly affected by BC. In case bc20, the solar flux reaching the surface, the sensible heat flux, and the latent heat flux are reduced by up to 80, 30, and 21Wm−2, respectively. The reduced surface evaporation leads to a reduced vapor amount at the early stage. After some time, the heating effect causes a large-scale convergence and brings slightly more vapor into the domain. The effect of BC on the cold pool strength and low-level wind shear is small and hence does not significantly affect the triggering of new convections. In addition, our results show that the effect of BC is negligible on the strength and rain rate of the squall line case.

Modelling the Effect of Black Carbon and Sulfate Aerosol on the Regional Meteorology Factors

In this study, we focus on the effect of black carbon aerosol and sulfate aerosol on meteorology factors during heavy pollution period and non-heavy pollution period. The version of WRF/chem V3.4 was used in this work, Four Simulation scenarios are applied to simulate the effect of the effect of black carbon aerosol and sulfate aerosol on solar radiation, temperature, PBL high. The analysis results show that the effect of black carbon and sulfate aerosol cause decline on three meteorological factors in both heavy pollution and non-heavy pollution period in both January and July. The influence of two aerosols on meteorological factors are less significant than winter. During heavy pollution, black carbon aerosol cause the loss of solar radiation is 29.1W/m2; the warming effect of black carbon aerosol caused temperature to rise 0.05°C; PBL height decreased by an average of 73.1m. Sulfate aerosols cause the loss of solar radiation is 21.5W/m2; Temperature fell an average of 0.89°C; PBL height decreased by 66.6m. The change of three meteorological factors due to aerosol feedback in non-heavy pollution period in much smaller than heavy pollution period.

Radiative effects of black carbon aerosols on Indian monsoon: a study using WRF-Chem model

The Weather Research and Forecasting model with Chemistry (WRF-Chem) is utilized to examine the radiative effects of black carbon (BC) aerosols on the Indian monsoon, for the year 2010. Five ensemble simulations with different initial conditions (1st to 5th December, 2009) were performed and simulation results between 1st January, 2010 to 31st December, 2010 were used for analysis. Most of the BC which stays near the surface during the pre-monsoon season gets transported to higher altitudes with the northward migration of the Inter Tropical Convergence Zone (ITCZ) during the monsoon season. In both the seasons, strong negative SW anomalies are present at the surface along with positive anomalies in the atmosphere, which results in the surface cooling and lower tropospheric heating, respectively. During the pre-monsoon season, lower troposphere heating causes increased convection and enhanced meridional wind circulation, bringing moist air from Indian Ocean and Bay of Bengal to the North-East India, leading to increased rainfall there. However, during the monsoon season, along with cooling over the land regions, a warming over the Bay of Bengal is simulated. This differential heating results in an increased westerly moisture flux anomaly over central India, leading to increased rainfall over northern parts of India but decreased rainfall over southern parts. Decreased rainfall over southern India is also substantiated by the presence of increased evaporation over Bay of Bengal and decrease over land regions.

Climate effect of black carbon aerosol in a Tibetan Plateau glacier

In the Tibetan Plateau, the black carbon (BC) concentration in surface snow and snow pits has received much attention, whereas the seasonal behavior of aerosol-in-snow concentration, vertical profile, melt-scavenging, and enrichment have received relatively little attention. Here we investigate these processes and their impacts on radiative forcing on the Muji glacier in the westernmost Tibetan Plateau during the 2012 snowmelt season. Increasing impurity concentrations were mostly due to post-deposition effects rather than new deposition. On 5 July, BC concentrations in the surface snow were higher than those of fresh snow, implying enrichment via sublimation and/or melting of previous snow. Fresh snow contained 25 ng g−1 BC on 27 July; afterward, BC gradually increased, reaching 730.6 ng g−1 in September. BC, organic carbon (OC), and dust concentrations co-varied but differed in magnitude. Melt-scavenging efficiencies were estimated at 0.19 ± 0.05 and 0.04 ± 0.01 for OC and BC, respectively, and the BC in surface snow increased by 20–25 times depending on melt intensity. BC-in-snow radiative forcing (RF) was approximately 2.2 W m−2 for fresh snow and 18.1–20.4 W m−2 for aged snow, and was sometimes reduced by the presence of dust.

Radiative effect of black carbon aerosol on seasonal variation in snow depth in the Northern-Hemisphere

In this research, we studied the effects of black carbon (BC) aerosol radiative forcing on seasonal variation in the Northern Hemisphere (NH) using numerical simulations with the NASA finite-volume General Circulation Model (fvGCM) forced with monthly varying three-dimensional aerosol distributions from the Goddard Ozone Chemistry Aerosol Radiation and Transport Model (GOCART). The results show that atmospheric warming due to black carbon aerosols subsequently warm the atmosphere and land surfaces, especially those over Eurasia. As a result, the snow depth in Eurasia was greatly reduced in late winter and spring, and the reduction in snow cover decreased the surface albedo. Our surface energy balance analysis shows that the surface warming due to aerosol absorption causes early snow melting and further increases surface-atmosphere warming through snow/ice albedo feedback. Therefore, BC aerosol forcing may be an important factor affecting the snow/ice albedo in the NH.

Short-lived climate forcers from current shipping and petroleum activities in the Arctic

Abstract. Emissions of short-lived climate forcers (SLCF) in the Arctic region are expected to increase, notably from shipping and petroleum extraction. We here discuss changes in atmospheric SLCF concentrations and resulting radiative forcing (RF) from present day shipping and petroleum activities in the Arctic. The three-dimensional chemistry transport OsloCTM2 and a state of the art radiative forcing model are used, based on a coherent dataset of present day Arctic emissions. We find that the net RF of SLCF of shipping in the Arctic region is negative, mainly due to the direct and indirect RF effects of sulphate emissions, while the net RF of SLCF of petroleum extraction is positive, mainly due to the effects of black carbon aerosols in the air and deposited on snow. Strong seasonal variations of the sensitivities to emissions are found. In terms of annual mean values we find that the Arctic sensitivities to SLCF is similar to global average sensitivities. One exception to this is the stronger snow/ice albedo effect from BC emissions.

Simulation of direct effects of black carbon aerosol on temperature and hydrological cycle in Asia by a Regional Climate Model

The simulation of direct radiative effect of black carbon (BC) aerosol over Asia is carried out with application of Regional Climate Model RegCM3 over the period of 1993–2003 based on BC emission inventory in 2000. Major findings are as follows. The column burden of BC exceeds 1 mg/m2 in central, eastern, and southern China with the highest value of 2.5 mg/m2 over Sichuan Basin of China, and is of 1–2 mg/m2 in India subcontinent. The column averaged advection field of BC shows an eastward tendency in north of 20° N, whereas an opposite trend is found in south of 10° N. Off-line radiative forcing (RF) induced by BC, which is due to direct absorption or scattering of BC, is positive at the top of the atmosphere (TOA), while maximum effect is found over Sichuan Basin. The RF is of 1–1.5 W/m2 in areas such as the middle and low reaches of the Yangtze River, East China Sea, South China Sea, Indo-China Peninsula and most parts of Indian subcontinent. Surface RF is found to be negative and its absolute value is larger than that at TOA. Based on simulation results, BC’s impacts on temperature, stratification stability, water vapor, precipitation and evaporation etc., are primarily characterized by cold-and-wet change in southern and northwest China, cold-and-dry change in northern and northeast China, warm-and-wet change of India subcontinent, as well as warm-and-dry change of Central Asia.

Effects of Black Carbon Aerosols on the Indian Monsoon

Abstract A six-member ensemble of twentieth-century simulations with changes to only time-evolving global distributions of black carbon aerosols in a global coupled climate model is analyzed to study the effects of black carbon (BC) aerosols on the Indian monsoon. The BC aerosols act to increase lower-tropospheric heating over South Asia and reduce the amount of solar radiation reaching the surface during the dry season, as noted in previous studies. The increased meridional tropospheric temperature gradient in the premonsoon months of March–April–May (MAM), particularly between the elevated heat source of the Tibetan Plateau and areas to the south, contributes to enhanced precipitation over India in those months. With the onset of the monsoon, the reduced surface temperatures in the Bay of Bengal, Arabian Sea, and over India that extend to the Himalayas act to reduce monsoon rainfall over India itself, with some small increases over the Tibetan Plateau. Precipitation over China generally decreases due to the BC aerosol effects. There is a weakened latitudinal SST gradient resulting from BC aerosols in the model simulations as seen in the observations, and this is present in the multiple-forcings experiments with the Community Climate System Model, version 3 (CCSM3), which includes natural and anthropogenic forcings (including BC aerosols). The BC aerosols and consequent weakened latitudinal SST gradient in those experiments are associated with increased precipitation during MAM in northern India and over the Tibetan Plateau, with some decreased precipitation over southwest India, the Bay of Bengal, Burma, Thailand, and Malaysia, as seen in observations. During the summer monsoon season, the model experiments show that BC aerosols have likely contributed to observed decreasing precipitation trends over parts of India, Bangladesh, Burma, and Thailand. Analysis of single ensemble members from the multiple-forcings experiment suggests that the observed increasing precipitation trends over southern China appear to be associated with natural variability connected to surface temperature changes in the northwest Pacific.

Climate effects of black carbon aerosols in China and India.

In recent decades, there has been a tendency toward increased summer floods in south China, increased drought in north China, and moderate cooling in China and India while most of the world has been warming. We used a global climate model to investigate possible aerosol contributions to these trends. We found precipitation and temperature changes in the model that were comparable to those observed if the aerosols included a large proportion of absorbing black carbon ("soot"), similar to observed amounts. Absorbing aerosols heat the air, alter regional atmospheric stability and vertical motions, and affect the large-scale circulation and hydrologic cycle with significant regional climate effects.

An interactive simulation of the direct radiative effect of black carbon aerosol in a climate model

An interactive simulation of the direct radiative effect of black carbon aerosol in a climate model