Economic Profitability Research Articles

Growth, profitability, nutritional, and anti-nutritional properties of seven Manihot esculenta Crantz (cassava) varieties as affected by arbuscular mycorrhizal fungi

Despite a range of methods used to promote modern agriculture with several outcomes, food quality and availability problems remain. This work aims to evaluate the effect of AM fungi inoculation on the growth, yield, nutritional, and antinutritional properties of 7 varieties of cassava. Growth characteristics, yields, rentability, nutritional, and antinutritional of tubers of each treatment were determined at harvest. All the cassava varieties used form a symbiosis with AM fungi at various frequencies, with the I090590 variety being the best (61.66 %). The best amount of chlorophyll, carotenoid, and height of plants were recorded at 9 months old. The 96/1414, TME/693 and MD varieties respectively show the best amount of chlorophyll, size, and carotenoids at 9 months old. Following AM fungi inoculation, an increase in the content of chlorophyll, size, and carotenoids was recorded for all the varieties with the best rate attributed respectively to 92/0326, MD, and 92/0326. Tuber yields vary significantly depending on the cassava varieties, with the best (56.16 t/ha) recorded for the I090590 variety. Following inoculation with AM fungi, a significant increase in yields was recorded, with the best ratio (2.7) obtained with the AE variety. The I090590 variety shows the best yield and by then the most profitable. Inoculation with AM fungi leads to a significant increase in the sugar, protein, fibre, and phosphorus content of all cassava varieties, with the best ratios obtained in 96/1414, 01/1797, and I090590 varieties respectively. Similarly, the inoculation of cassava varieties with AM fungi leads to a significant reduction in the content of cyanides, oxalates, and phytates. The best ratio of reduction for cyanide was 1.91 for the MD variety. AM fungi inoculation is an important way to ensure safe, exponential production and high economic profitability of foodstuffs.

Integrated nutrient management on oat + grasspea intercropping system: an evaluation of system productivity, economics, energetics and carbon footprint

A field investigation took place at Central Research Farm of Bidhan Chandra Krishi Viswavidyalaya, West Bengal, India during winter seasons of 2020–21 and 2021–22 with the aim to evaluate system productivity, economics, energetics and carbon footprint (CF) of oat + grasspea intercropping systems under different integrated nutrient managements (INM). The experiment was executed in split-plot design with 4 cropping systems in main plots and 4 levels of nutrient management in sub plots. The 3:3 intercropping system of oat + grasspea ensured highest system productivity, whereas sole grasspea stood best in terms of economics, energetics and environment safety by lowering CF. Notably, INM involving 75% N through urea + 25% N through vermicompost registered significantly higher system productivity in case of 3:3 oat + grasspea intercropping system (CS4N3) (18.77 q ha−1). Further, this intercropping system yielded high economic profitability (net return: US$ 430.4 ha−1, benefit–cost ratio: 1.71) as well as energy indices (energy output: 71179.1 MJ ha-1, net energy gain: 60352.0 MJ ha−1, energy ratio: 6.57 and energy profitability: 5.57). CF was also found relatively low under CS4N3 (Yield scaled CF: 62.2 kg CO2-e q−1). Furthermore, high carbon efficiency (7.92) and carbon sustainability index (6.92) were also exhibited by CS4N3 as it produced maximum carbon output (1801.2 kg ha−1). In conclusion, the 3:3 oat + grasspea intercropping system using INM can be viable option to ensure economic and energy viability and minimize greenhouse gas emissions without compromising system productivity. Particularly, this intercropping system combined with 75% N through urea + 25% N through vermicompost as INM option can be recommended for the cereal and legume growers of India, specifically under intensive cropping scenario.

Optimal capacity configuration and operation strategy of typical industry load with energy storage in fast frequency regulation

As the potential and competent load-side resources for frequency response and control in modern power grids, typical industrial load can compensate for the deficiency of frequency response capability for new-type power systems. However, the operational flexibility is seriously enforced by the operation conditions uncertainties of industrial load. With “Online Calculation, and Real-time Matching” as the core, based on fuzzy mathematical theory, the coordinated operation strategy of typical industrial loads and energy storage systems (ESS) is proposed to finish fast frequency regulation (FFR) tasks. And an optimal capacity configuration model of industrial loads with ESSs is established to evaluate the whole economic profitability in FFR. Specially, in terms of algorithms, a novel Two-layer Parallel Particle Swarm Optimization and Genetic Algorithm (TPPSGA) is innovatively designed in this manuscript. Comparing with traditional heuristic algorithms, TPPSOGA improves computation speed by 6.84 times. Simulation results show that our proposed strategy can reasonably estimate the frequency capability of industrial load by membership degree function, and prove that the industrial load participating in FFR with the support of ESSs is able to get more revenue and stability than industrial load or ESSs separately is in regulation of FFR. The economic analyze in market price and ESS parameters can help the load agent to screen the suitable-type ESS and its capacity to serve for FFR and enhance the flexibility in load-side frequency regulation.

Optimizing water-energy-food nexus index, CO2 emissions, and chemical pollutants under irrigation water salinity scenarios

The escalation of crises related to water quantity of quality, energy, food, and the environment has posed numerous challenges to sustainable development in the agricultural sector. This study seeks to establish an optimal and sustainable framework within the agricultural sector by meeting the objectives of the WEF (Water-Energy-Food) nexus index and environmental. For this, we individually optimized the objectives: maximizing the WEFN index (O1), minimizing CO2 emissions (O2), reducing chemical fertilizer consumption (O3), minimizing chemical pesticide usage (O4), and maximizing gross margin (O5) under various electrical conductivity (EC) scenarios (optimistic, moderate, and pessimistic) within the irrigation network of the Jiroft plain in Iran. In the second stage, we employed a Multi-Objective Programming (MOP) Model to attain these objectives using a weighted sum approach simultaneously. The results of the first stage revealed that under moderate and pessimistic EC irrigation water scenarios, significant alterations in the crop selection within the optimized models for O1 and O5 objectives occurred compared to the baseline scenario, which did not consider EC irrigation water. Specifically, in the pessimistic scenario with an EC irrigation water level of 2.25 ds/m, crops such as onions, tomatoes, and potatoes were replaced within the optimal cropping pattern by wheat, barley, and green-maize, leading to a notable decline in program efficiency. The results from the MOP optimization model indicated that in the pessimistic EC irrigation water scenario, the WEFN index, CO2 emissions, fertilizer consumption, pesticide consumption, and gross margin would change by approximately +12%, −48%, −28%, −8%, and −74%, respectively, compared to the baseline scenario. Consequently, an increase in EC irrigation water, despite improving environmental conditions, would substantially diminish economic profit. Thus, overlooking the impact of EC irrigation water in the WEF nexus analysis could result in misleading conclusions.

Assessing Value-Laden Technology

Technological innovations—tools, artefacts, and processes—open up new possibilities of human action and thereby increase the domain of our positive freedom. Technology is inherently value-laden, since such an intended increase of freedom may be a good or bad relative to human values. The use of tools may also involve unintended and unwanted by-products and side effects. Therefore, technology should not develop in a deterministic or random manner but should be guided by reasonable democratic principles. Technology assessment (TA) is a pattern for the evaluation of technological projects and products by their costs and benefits, risks, and profits. Using philosophical distinctions and arguments as its method, this paper explains, elaborates, and illustrates Niiniluoto’s formula TA = 6E + S for TA. The first E is effectiveness, the ability of the new tool or solution to produce its intended effects. This is the main concern of the engineer. The second is its economic profit, based on the monetary exchange value of the product. This is the domain of economic theories. Effectiveness and economy, and efficiency as their combination, are not the only relevant dimensions of TA. As products of design, artefacts have esthetic qualities, studied today in applied esthetics. The relations of tools to the health of their users are studied in ergonomics. The relations of human technologies to the health of the natural environment and sustainable development are treated in ecology. Technical tools and their effects can always be evaluated by ethical standards which concern their moral worth. Technological systems have also an impact which is social in the broad sense, since they can lead to changes in the communicative, legal, institutional, and political spheres of society.

Influence of sowing dates and weed management practices on weed dynamics, productivity and profitability of direct seeded rice

This study evaluated the impact of differential sowing windows and improved weed management strategies on weed dynamics, productivity, and economic viability of direct drum seeded rice (Oryza sativa L.) in the temperate agro-ecosystem of Kashmir. A two-year field experiment was conducted utilizing a split-plot design with two sowing dates (May 10 and June 3) as main plots and six weed management practices as sub-plots. The earlier sowing date (May 10) resulted in significantly enhanced leaf area index, crop growth rate, relative growth rate, net assimilation rate, and grain and straw yields compared to the later sowing (June 3). Among weed management treatments, four mechanized conoweedings (equivalent to weed-free conditions) and sequential application of bensulfuron methyl + pretilachlor (60 and 600 g a.i. ha−1) as pre-emergence followed by 2,4-D (0.75 kg a.i. ha−1) as post-emergence demonstrated superior efficacy in weed suppression and augmentation of crop growth parameters and yield attributes. These treatments also exhibited the lowest weed index and highest benefit–cost ratio. The May 10 sowing, coupled with efficacious weed control measures, significantly reduced weed density and biomass while concomitantly improving nutrient uptake and economic returns. The results indicate that adopting a May 10 sowing date for direct seeded rice, in conjunction with either four conoweedings or the aforementioned sequential herbicide application, can optimize agronomic productivity and economic profitability under the temperate conditions of Kashmir. The study aided in choosing the best sowing window and efficient weed management strategy for attaining higher productivity and profitability of direct seeded rice in temperate conditions.

Short-Term Effects of Cenchrus fungigraminus/Potato or Broad Bean Interplanting on Rhizosphere Soil Fertility, Microbial Diversity, and Greenhouse Gas Sequestration in Southeast China.

Cenchrus fungigraminus is a new species and is largely used as forage and mushroom substrate. However, it can usually not be planted on farmland on account of local agricultural land policy. Interplanting Cenchrus fungigraminus with other crops annually (short-term) is an innovative strategy to promote the sustainable development of the grass industry in southern China. To further investigate this, C. fungigraminus mono-planting (MC), C. fungigraminus-potato interplanting (CIP) and C. fungigraminus-broad bean interplanting (CIB) were performed. Compared to MC, soil microbial biomass carbon (SMBC), soil organic matter (SOM), ammoniacal nitrogen (AMN), pH and soil amino sugars had a positive effect on the rhizosphere soil of CIP and CIB, as well as enhancing soil nitrogenase, nitrite reductase, and peroxidase activities (p < 0.05). Moreover, CIP improved the root vitality (2.08 times) and crude protein (1.11 times). In addition, CIB enhanced the crude fiber of C. fungigraminus seedlings. These two interplanting models also improved the microbial composition and diversity (Actinobacteria, Firmicutes, and Bacteroidota, etc.) in the rhizosphere soil of C. fungigraminus seedlings. Among all the samples, 189 and 59 genes were involved in methane cycling and nitrogen cycling, respectively, which improved the presence of the serine cycle, ribulose monophosphate, assimilatory nitrate reduction, methane absorption, and glutamate synthesis and inhibited denitrification. Through correlation analysis and the Mantel test, the putative functional genes, encoding functions in both nitrogen and methane cycling, were shown to have a significant positive effect on pH, moisture, AMN, SOM, SMBC, and soil peroxidase activity, while not displaying a significant effect on soil nitrogenase activity and total amino sugar (p < 0.05). The short-term influence of the interplanting model was shown to improve land use efficiency and economic profitability per unit land area, and the models could provide sustainable agricultural production for rural revitalization.

The Territorialization of Cultural Heritage as an Opportunity for Its Adaptive Reuse From the Tourist Management

ABSTRACT Considering the territory as an expansive dimension of heritage offers a unique opportunity to promote both the conservation of assets and the development of the surrounding area. However, heritage often remains isolated from the holistic management of tourist destinations, failing to integrate as a “living” element. To address this issue, the study proposes a conceptual delimitation that takes into account the services provided by various facilities within the space and their uses. By analyzing the interdependencies between heritage and the territorial system, inspired by ecosystem service evaluation, a methodology is applied to the sculpture “Elogio del Horizonte” in Gijón, Spain. The results establish an initial delimitation for the case study, providing a foundation for identifying needs and generating proposals. This method aims to guide decision-making in heritage management in the tourism sector, going beyond mere economic profitability and prioritizing the community's needs.

SoC Profile Reconstruction in Residential EV Charging: Assessing the Degradation of V1G and V2G in Denmark

The development of Smart Charging (SC) strategies for Electric Vehicles (EVs) is on the rise, driven by the potential benefits for both customers and grid operators. While several studies have explored the impact of these strategies on battery degradation, there is a lack of studies based on real-world data. To overcome the limited information provided by the current EV-EVSE (EV Supply Equipment) communication protocols, a methodology to reconstruct State of Charge (SoC) profiles based on the charging power is proposed and used to reconstruct the profiles and analyse the battery degradation for three residential EVSEs in Denmark, comparing degradation trends in under Uncontrolled Charging (UC) mode, with the SC ones. Results show that the economic profits from unidirectional (V1G) SC strategies based on price, offer significant cost savings (10-22% annually) and reduce calendar ageing by up to 4% over a decade. V2G strategies entail modest increases in cost savings at the cost of a minimal additional degradation.

Evaluación económica de un esquema de alimentación complementaria continua en cabras locales en pastoreo

Objective. To evaluate the economic viability of incorporating a long term-supplementary feeding scheme in grazing local goats from the last third of gestation and throughout lactation. Materials and methods. Twenty-four local goats were utilized: control group (CG, n=12) and supplemented group (SG; n=12). Daily milk production (DMP) was recorded in goats, per lactation (MPLT), and per lactation stage [early (MPEL) middle (MPML), and late lactation (MPLL)], duration of lactation (DL; days), final live weight (FLW), and final body condition (FBC). In kids, birth weight (BW), weight at sale (WS), age at sale (AS), and mortality rate were recorded. The economic analysis considered the costs of daily supplementation, labor for handling and care of the animals, and sale prices of milk and kids. Results. The best productive behavior and the highest incomes were obtained in SG (p&lt;0.05) for all variables, except AS and mortality rate. The highest values in CG (p&lt;0.05) were obtained in AS and economic profit in almost all the considered variables, Except in MPEL. Positive profits were obtained in SG in early and middle lactation, and negative in late lactation for SG, but with higher FBC. Conclusions. A long-term supplementary feeding is economically viable to increase income and profits from kids and milk sales and improves the body condition of the dams, which will benefit the productivity of the herd.

The Nexus Among Foreign Direct Investment, Economic Growth, and Country Risk: An Aggregated and Panel ARDL Analysis

ABSTRACT The purpose of this article is to investigate and analyze the relationship among FDI, economic growth, and country risk. Using a panel study, based on data from 131 countries spanning the period of 1995 to 2018, we find that investors prioritize risk perception over economic profits. They tend to favor low risk countries with lower default risk, even if the expected return is also lower. Consequently, advanced countries with reduced default risk attract more capital inflows. Thus, advanced countries with lower default risk attract more capital, and the responses of FDI to the independent variables are rather short in nature.

Designing circular economy strategies in distributed generation for small‐ and medium‐sized enterprises using Monte Carlo simulation

AbstractThe circular economy (CE) strategies in energy communities enable firms to efficiently manage the excess of photovoltaic energy they produce, and thereby enhance their sustainability. Thus, the present research aims to compare the economic and financial profitability and greenhouse gas (GHG) emissions of shared photovoltaic self‐consumption versus individual self‐consumption in the region of Extremadura (Spain). Six firms with complementary energy profiles were selected, analyzing their hourly energy consumption. In addition, the Monte Carlo method was used to generate 30,000 simulations, reducing the uncertainty caused by the variability of the firms' energy consumption. The results show that collective generation covers the energy needs more efficiently, reducing the cost of energy consumed by 14.38% and generating better cost–benefit ratio. They also show that the CE strategy of the energy community allows firms to obtain a considerable reduction of GHG emissions associated with the photovoltaic energy consumed.

Evaluation of the cost-benefit ratio of two fish production systems in 4 farms in La Plata, Huila

The pisciculture plays an important role in the economic dynamization of the municipality, small farmers and their families. Despite the fact that the families dedicated to this agricultural activity claim to obtain significant income, they do not keep a record that shows the economic profitability of their production system. The objective of this research study was to evaluate the current cost-benefit relationship in fish production on four farms in the municipality of La Plata, Huila. The management systems implemented on the farms were characterized, their profitability was analyzed, and the fish farmers' perception of their systems was identified. Qualitative methods such as field visits, interviews and quantitative methods such as surveys were used to collect the information and later systematize it using ATLAS.ti version 9.0 software. It was found that most of the producers choose to implement a semi-intensive system, which is related to the availability of resources they have on their farms and that part of the benefits are not only economic but also of high quality self-consumption, thus demonstrating that their system is an important source of family sustenance. Finally, it was found that the fish farmers are satisfied with their production systems.

Closed-Loop recovery of spent lithium-ion batteries based on preferentially selective extraction of lithium strategy

From the perspective of sustainable energy utilization and green economic development, efficient and closed-loop recovery of spent lithium-ion batteries (LIBs) is imperative. This work has developed a closed-loop recovery process for spent LIBs based on preferentially selective extraction of lithium. After molten salt assisted roasting, the efficiency for preferential extraction of Li+ could be high up to 99.3 % after optimization of selectivity. Dilute sulfuric acid alone facilitated the leaching efficiency of valuable metals over 98 %, eliminating the need for reductants. Regeneration of residue into graphite and recovery of NaCl mixed powder could avoid the wastage of residual metals. Compared with the conventional process, this work shows a high recovery efficiency and closed-loop extent, with a profit of $6,820 per ton of recovered spent LIBs. This work provides a more environmentally friendly recovery strategy with higher economic profits and environmental impacts, thereby enhancing the potential for industrial applications.

Inclusion Effect of Various Levels of Jack Mackerel Meal in Olive Flounder (Paralichthys olivaceus) Diets Substituting 50% Fish Meal with Duck By-Product Meal on Growth and Feed Utilization.

This experiment was performed to evaluate the inclusion impact of various levels of jack mackerel meal (JMM) in olive flounder (P. olivaceus) feeds substituting 50% FM by duck by-product meal (DBM) on growth, feed availability, and economic efficiency. Seven experimental diets were prepared. The control (Con) diet contained 60% FM. Fifty percent FM in the Con diet was substituted with DBM, and then the graded levels (0%, 10%, 20%, 30%, 40%, and 50%) of JMM were added instead of FM, named the DJ0, DJ10, DJ20, DJ30, DJ40, and DJ50 diets, respectively. All feeds were assigned to triplicate fish groups. At the end of 56 days' feeding, fish fed the DJ40 and DJ50 diets exhibited comparable weight gain and specific growth rate to fish fed the Con diet. Higher feed consumption was observed in fish fed the Con, DJ40, and DJ50 diets compared to fish fed the DJ0 and DJ10 diets. Lower feed conversion ratio was observed in fish fed the Con diet compared to fish fed the DJ0, DJ10, DJ20, and DJ30 diets. Furthermore, the DJ50 diet led to the highest economic profit index (EPI). In conclusion, inclusion of 50% JMM in the olive flounder diet replacing 50% FM with DBM seems to be the most recommendable dietary treatment based on growth and feed consumption of olive flounder and EPI.

Processing and Recovery of Heavy Crude Oil Using an HPA-Ni Catalyst and Natural Gas.

To maintain economic profitability and stabilize fuel prices, refineries actively explore alternatives for efficiently processing (extra) heavy crude oils. These oils are challenging to process due to their complex composition, which includes significant quantities of asphaltenes, resins, and sulfur and nitrogen heteroatoms. A critical initial step in upgrading these oils is the hydrogenation of polyaromatic compounds, requiring substantial hydrogen sources. Methane from natural gas streams is known to act as an effective hydrogen donor. This study investigates the use of a heteropolyacid (HPA) catalyst modified with nickel and methane to enhance the quality of heavy crude oil with an initial 8.0°API (at 15.5 °C) and 2200 cSt viscosity (at 37.5 °C). After treatment in a batch reactor at 380 °C and 4.4 MPa for 2 h, the oil properties markedly improved: API gravity increased from 8.0 to 16.0 (at 15.5 °C), and kinematic viscosity reduced from 2200 to 125 cSt (at 37.5 °C). Additionally, there was a significant decrease in asphaltenes (from 38.7 to 16.4% by weight), sulfur (from 5.9 to 4.0% by weight), and nitrogen (from 971 to 695 ppm). This was accompanied by an increase in the volume of light distillates from 1.3 to 4.9%, and middle distillates from 8.8 to 21.0%. These results suggest that nickel-modified HPA catalysts, combined with methane as a hydrogen donor, are a promising option for upgrading heavy crude oils.

Optimal planning and operation of integrated energy systems in South Korea: Introducing a Novel ambiguity set based distributionally robust optimization

In this paper, we address the increasing focus on Renewable Energy Sources (RES) and energy policies in S. Korea, advocating for a shift from large, centralized power systems to decentralized Local Power Systems (LPS). This transition emphasizes the integration of Integrated Energy Systems (IES), which significantly enhances the target benefits for stakeholders in the power system. We have also adopted a Distributionally Robust Optimization (DRO) approach to account for the output uncertainty of RES and developed and applied new ambiguity sets tailored to each RES, enhancing the extensive robust design previously utilized with DRO. By applying our proposed ambiguity set-based DRO, we avoid excessive robustness and achieve superior optimal outcomes compared to the general DRO methodology, potentially making a significant contribution to business investment decisions. We have categorized the main stakeholders of the power system as Independent Systems Operators (ISO), Renewable Energy Providers (REP), Energy Exchange Aggregators (EXA), and End-users. The integration of IES leads to a benefit improvement rate of up to 34.8 %, 23.0 %, and 24.2 % for ISOs, REPs, and End-users, respectively, on a global scale. EXAs can secure an annual economic profit of up to $191,362.

Ecofeminist Kitchens: Reimagining Professional Kitchens as Spaces of Sustainable Foodwork

Professional kitchens are both producers and consumers of food and many operate through unsustainable practices which have significant social and ecological impacts. Socially, they are spaces of low paid, high-pressured work, where gendered occupational discrimination is common. Ecologically, food production in these spaces contributes significantly to the demand for unethical meat production and the commodification of nature globally. The main aim of this article is to reimagine professional kitchens as spaces of sustainable and equitable foodwork. To this end, this research combines an empirical analysis of the relation between gender, power, and sustainability in professional kitchens in Glasgow with a theoretical examination of ecofeminist scholarship. In Glasgow, data were collected through semi-structured interviews with both male and female head chefs on the everyday (un)sustainable practices and norms of professional chefs and the ways they intertwine with gender. This research found that kitchens are organised in ways that normalize toxic masculinity, disempower women, and seriously harm non-human others. Furthermore, the absence of ecological literacy in professional kitchens is shown to be a significant driver of unsustainable behaviours. Drawing on ecofeminist scholarship, this article goes on to envision what changes are needed for a sustainable and equitable transformation in professional kitchens. Based on this theoretical engagement, I argue that transforming professional kitchens requires a redistribution of power across genders to eradicate sexist hierarchies. Furthermore, there is a need to decenter economic profit to make space for an ethic of compassion which fulfils our moral obligations to both human and non-human others.

Impacts of poultry manure and biochar amendments on the nutrients in sweet potato leaves and the minerals in the storage roots

Poultry manure (PM) has demonstrated its potential to enhance crop nutritional quality. Nevertheless, there remains a dearth of knowledge regarding its synergistic effects when combined with wood biochar (B) on the nutrient concentrations in sweet potato leaves (Ipomoea batatas L.) and the mineral content stored in sweet potato storage roots. Hence, a two-year field trial was undertaken during the 2019 and 2020 cropping seasons in southwestern Nigeria, spanning two locations (Owo—site A and Obasooto—site B), to jointly apply poultry manure and wood biochar as soil amendments aimed at enhancing the nutritional quality of sweet potato crop. Each year, the experiment involved different combinations of poultry manure at rates of 0, 5.0, and 10.0 t ha−1 and biochar at rates of 0, 10.0, 20.0, and 30.0 t ha−1, organized in a 3 × 4 factorial layout. The results of the present study demonstrated that the individual application of poultry manure (PM), biochar (B), or their combination had a significant positive impact on the nutrient composition of sweet potato leaves and minerals stored in the sweet potato storage roots, with notable synergistic effects between poultry manure and biochar (PM × B) in enhancing these parameters. This highlights the potential of biochar to enhance the efficiency of poultry manure utilization and improve nutrient utilization from poultry manure. The highest application rate of poultry manure at 10.0 t ha−1 and biochar at 30.0 t ha−1 (PM10 + B30), resulted in the highest leaf nutrient concentrations and mineral composition compared to other treatments at both sites. Averaged over two years, the highest application rate of poultry manure at 10.0 t ha−1 and biochar at 30.0 t ha−1 (PM10 + B30) significantly increased sweet potato leaf nutrient concentrations: nitrogen by 88.2%, phosphorus by 416.7%, potassium by 123.8%, calcium by 927.3%, and magnesium by 333.3%, compared to those in the control (PM0 + B0). The same treatment increased the concentration of sweet potato root storage minerals: phosphorus by 152.5%, potassium by 77.4%, calcium by 205.5%, magnesium by 294.6%, iron by 268.4%, zinc by 228.6%, and sodium by 433.3%, compared to the control. The highest application rate of poultry manure at 10.0 t ha−1 and biochar at 30.0 t ha−1 yielded the highest economic profitability in terms of gross margin (44,034 US$ ha−1), net return (30,038 US$ ha−1) and return rate or value-to-cost ratio (VCR) (263). The results suggested that the application of poultry manure at 10 t ha−1 and biochar at 30 t ha−1 is economically profitable in the study areas and under similar agroecological zones and soil conditions.

Sustainable and multifunctional polyurethane green composites with renewable materials

Polyurethane materials are characterised by an ever-expanding range of application possibilities due to their versatility. Currently, the management of leftovers as well as post-production and post-consumer waste for the production of biocomposites is one of the most obvious, effective and profitable solutions. Due to the renewable nature of biofillers such as cellulose, lignin, and chitin, their use to obtain composite polyurethane elastomers is a real perspective for the dissemination of more environmentally friendly materials and, at the same time, contributes to additional economic profit. The key aspect for further development of the polyurethane/biopolymer biocomposite concept is to fulfil of a number of currently functioning industry standards, mainly those regarding functional properties. In the presented research, an attempt to obtain advanced polyurethane elastomers with the addition of biopolymers (cellulose, lignin, and chitin) was conducted for the first time. The innovative biocomposites obtained in this way were characterised by good processing parameters (processing times, density) and improved functional properties compared to the standard without the addition of fillers (abrasion resistance, tensile strength, contact angle, hardness). Due to the above-mentioned facts, the described biocomposites can be successfully used for the production of multifunctional elastomeric materials with a wide range of potential applications. Moreover, it is worth noting that the management of waste materials in this way will reduce production costs while indirectly contributing to the protection of the natural environment.Graphical abstract